net: ar8327: modify some configuration of switch

Imported from https://source.codeaurora.org/quic/qsdk/system/openwrt/commit/?h=korg/linux-3.4.y/release/arugula_bb_cs&id=2be4f8a8b205ae1a37db44839864451ebe893e6e
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
Enable flow control of LAN and WAN ports to
get better performance.
Setup pvid as 0 for all ports during initialisation
to avoid confusion during system or switch INIT.
Disable PORT MAC before config MAC to avoid it work abnormal.
This change is for IR-054144, IR-057315.

Change-Id: I345f3dffa59ad3f97150e09692723da12a7b1067
Signed-off-by: Zou Shunxiang <shunxian@codeaurora.org>
Signed-off-by: xiaofeis <xiaofeis@codeaurora.org>

diff --git a/target/linux/generic/files/drivers/net/phy/ar8216.h b/target/linux/generic/files/drivers/net/phy/ar8216.h
index 6a3fd8db0110187f9c6f315572f6b85d6569975d..d9508b9ff83c4c3d75978ae86546705660661a7f 100644 (file)
--- a/target/linux/generic/files/drivers/net/phy/ar8216.h
+++ b/target/linux/generic/files/drivers/net/phy/ar8216.h
@@ -154,6 +154,7 @@
 #define   AR8216_PORT_STATUS_LINK_UP   BIT(8)
 #define   AR8216_PORT_STATUS_LINK_AUTO BIT(9)
 #define   AR8216_PORT_STATUS_LINK_PAUSE        BIT(10)
+#define   AR8216_PORT_STATUS_FLOW_CONTROL  BIT(12)
 
 #define AR8216_REG_PORT_CTRL(_i)       (AR8216_PORT_OFFSET(_i) + 0x0004)
 

diff --git a/target/linux/generic/files/drivers/net/phy/ar8327.c b/target/linux/generic/files/drivers/net/phy/ar8327.c
index d2a5a5b6bec1fc62c9e3a6c86b8b477a2aea127c..74c80d445284e977ab290ccec95b001e3f34e1c8 100644 (file)
--- a/target/linux/generic/files/drivers/net/phy/ar8327.c
+++ b/target/linux/generic/files/drivers/net/phy/ar8327.c
@@ -685,12 +685,20 @@ ar8327_init_port(struct ar8xxx_priv *priv, int port)
        else
                t = AR8216_PORT_STATUS_LINK_AUTO;
 
-       ar8xxx_write(priv, AR8327_REG_PORT_STATUS(port), t);
+       if (port != AR8216_PORT_CPU && port != 6) {
+               /*hw limitation:if configure mac when there is traffic,
+               port MAC may work abnormal. Need disable lan&wan mac at fisrt*/
+               ar8xxx_write(priv, AR8327_REG_PORT_STATUS(port), 0);
+               msleep(100);
+               t |= AR8216_PORT_STATUS_FLOW_CONTROL;
+               ar8xxx_write(priv, AR8327_REG_PORT_STATUS(port), t);
+       } else {
+               ar8xxx_write(priv, AR8327_REG_PORT_STATUS(port), t);
+       }
+
        ar8xxx_write(priv, AR8327_REG_PORT_HEADER(port), 0);
 
-       t = 1 << AR8327_PORT_VLAN0_DEF_SVID_S;
-       t |= 1 << AR8327_PORT_VLAN0_DEF_CVID_S;
-       ar8xxx_write(priv, AR8327_REG_PORT_VLAN0(port), t);
+       ar8xxx_write(priv, AR8327_REG_PORT_VLAN0(port), 0);
 
        t = AR8327_PORT_VLAN1_OUT_MODE_UNTOUCH << AR8327_PORT_VLAN1_OUT_MODE_S;
        ar8xxx_write(priv, AR8327_REG_PORT_VLAN1(port), t);