arm: omap: hwmod: add a new addr space in otg for writing to control module

The mailbox register for usb otg in omap is present in control module.
On detection of any events VBUS or ID, this register should be written
to send the notification to musb core.

Till we have a separate control module driver to write to control module,
omap2430 will handle the register writes to control module by itself. So
a new address space to represent this control module register is added
to usb_otg_hs.

Acked-by: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 242aee498ceb21466e33ee04035ed63147e4a615..3c19120e0cdf0fb28ab19da5066119e7614dc1c5 100644 (file)
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -5890,6 +5890,12 @@ static struct omap_hwmod_addr_space omap44xx_usb_otg_hs_addrs[] = {
                .pa_end         = 0x4a0ab003,
                .flags          = ADDR_TYPE_RT
        },
+       {
+               /* XXX: Remove this once control module driver is in place */
+               .pa_start       = 0x4a00233c,
+               .pa_end         = 0x4a00233f,
+               .flags          = ADDR_TYPE_RT
+       },
        { }
 };