mx31ads: use of new iomux implementation

This was only compilation tested.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 6804fbe266ef920dfbd9006073e7307bc471490d..7941db3caf6faa2a79e6053c083d4fe3d443856c 100644 (file)
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -94,13 +94,16 @@ static struct imxuart_platform_data uart_pdata = {
        .flags = IMXUART_HAVE_RTSCTS,
 };
 
+static int uart_pins[] = {
+       MX31_PIN_CTS1__CTS1,
+       MX31_PIN_RTS1__RTS1,
+       MX31_PIN_TXD1__TXD1,
+       MX31_PIN_RXD1__RXD1
+};
+
 static inline void mxc_init_imx_uart(void)
 {
-       mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
-       mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
-       mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
-       mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
-
+       mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
        mxc_register_device(&mxc_uart_device0, &uart_pdata);
 }
 #else /* !SERIAL_IMX */
@@ -176,7 +179,7 @@ static void __init mx31ads_init_expio(void)
        /*
         * Configure INT line as GPIO input
         */
-       mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO));
+       mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
 
        /* disable the interrupt and clear the status */
        __raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);