CPS_ACCESSOR_RW(gcr, sz, MIPS_CM_CLCB_OFS + off, cl_##name) \
CPS_ACCESSOR_RW(gcr, sz, MIPS_CM_COCB_OFS + off, co_##name)
-/* GCB register accessor functions */
+/* GCR_CONFIG - Information about the system */
GCR_ACCESSOR_RO(64, 0x000, config)
+#define CM_GCR_CONFIG_NUMIOCU GENMASK(15, 8)
+#define CM_GCR_CONFIG_PCORES GENMASK(7, 0)
+
+/* GCR_BASE - Base address of the Global Configuration Registers (GCRs) */
GCR_ACCESSOR_RW(64, 0x008, base)
+#define CM_GCR_BASE_GCRBASE GENMASK_ULL(47, 15)
+#define CM_GCR_BASE_CMDEFTGT GENMASK(1, 0)
+#define CM_GCR_BASE_CMDEFTGT_DISABLED 0
+#define CM_GCR_BASE_CMDEFTGT_MEM 1
+#define CM_GCR_BASE_CMDEFTGT_IOCU0 2
+#define CM_GCR_BASE_CMDEFTGT_IOCU1 3
+
+/* GCR_ACCESS - Controls core/IOCU access to GCRs */
GCR_ACCESSOR_RW(32, 0x020, access)
+#define CM_GCR_ACCESS_ACCESSEN GENMASK(7, 0)
+
+/* GCR_REV - Indicates the Coherence Manager revision */
GCR_ACCESSOR_RO(32, 0x030, rev)
+#define CM_GCR_REV_MAJOR GENMASK(15, 8)
+#define CM_GCR_REV_MINOR GENMASK(7, 0)
+
+#define CM_ENCODE_REV(major, minor) \
+ (((major) << __ffs(CM_GCR_REV_MAJOR)) | \
+ ((minor) << __ffs(CM_GCR_REV_MINOR)))
+
+#define CM_REV_CM2 CM_ENCODE_REV(6, 0)
+#define CM_REV_CM2_5 CM_ENCODE_REV(7, 0)
+#define CM_REV_CM3 CM_ENCODE_REV(8, 0)
+
+/* GCR_ERR_CONTROL - Control error checking logic */
GCR_ACCESSOR_RW(32, 0x038, err_control)
+#define CM_GCR_ERR_CONTROL_L2_ECC_EN BIT(1)
+#define CM_GCR_ERR_CONTROL_L2_ECC_SUPPORT BIT(0)
+
+/* GCR_ERR_MASK - Control which errors are reported as interrupts */
GCR_ACCESSOR_RW(64, 0x040, error_mask)
+
+/* GCR_ERR_CAUSE - Indicates the type of error that occurred */
GCR_ACCESSOR_RW(64, 0x048, error_cause)
+#define CM_GCR_ERROR_CAUSE_ERRTYPE GENMASK(31, 27)
+#define CM3_GCR_ERROR_CAUSE_ERRTYPE GENMASK_ULL(63, 58)
+#define CM_GCR_ERROR_CAUSE_ERRINFO GENMASK(26, 0)
+
+/* GCR_ERR_ADDR - Indicates the address associated with an error */
GCR_ACCESSOR_RW(64, 0x050, error_addr)
+
+/* GCR_ERR_MULT - Indicates when multiple errors have occurred */
GCR_ACCESSOR_RW(64, 0x058, error_mult)
+#define CM_GCR_ERROR_MULT_ERR2ND GENMASK(4, 0)
+
+/* GCR_L2_ONLY_SYNC_BASE - Base address of the L2 cache-only sync region */
GCR_ACCESSOR_RW(64, 0x070, l2_only_sync_base)
+#define CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE GENMASK(31, 12)
+#define CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN BIT(0)
+
+/* GCR_GIC_BASE - Base address of the Global Interrupt Controller (GIC) */
GCR_ACCESSOR_RW(64, 0x080, gic_base)
+#define CM_GCR_GIC_BASE_GICBASE GENMASK(31, 17)
+#define CM_GCR_GIC_BASE_GICEN BIT(0)
+
+/* GCR_CPC_BASE - Base address of the Cluster Power Controller (CPC) */
GCR_ACCESSOR_RW(64, 0x088, cpc_base)
+#define CM_GCR_CPC_BASE_CPCBASE GENMASK(31, 15)
+#define CM_GCR_CPC_BASE_CPCEN BIT(0)
+
+/* GCR_REGn_BASE - Base addresses of CM address regions */
GCR_ACCESSOR_RW(64, 0x090, reg0_base)
-GCR_ACCESSOR_RW(64, 0x098, reg0_mask)
GCR_ACCESSOR_RW(64, 0x0a0, reg1_base)
-GCR_ACCESSOR_RW(64, 0x0a8, reg1_mask)
GCR_ACCESSOR_RW(64, 0x0b0, reg2_base)
-GCR_ACCESSOR_RW(64, 0x0b8, reg2_mask)
GCR_ACCESSOR_RW(64, 0x0c0, reg3_base)
+#define CM_GCR_REGn_BASE_BASEADDR GENMASK(31, 16)
+
+/* GCR_REGn_MASK - Size & destination of CM address regions */
+GCR_ACCESSOR_RW(64, 0x098, reg0_mask)
+GCR_ACCESSOR_RW(64, 0x0a8, reg1_mask)
+GCR_ACCESSOR_RW(64, 0x0b8, reg2_mask)
GCR_ACCESSOR_RW(64, 0x0c8, reg3_mask)
+#define CM_GCR_REGn_MASK_ADDRMASK GENMASK(31, 16)
+#define CM_GCR_REGn_MASK_CCAOVR GENMASK(7, 5)
+#define CM_GCR_REGn_MASK_CCAOVREN BIT(4)
+#define CM_GCR_REGn_MASK_DROPL2 BIT(2)
+#define CM_GCR_REGn_MASK_CMTGT GENMASK(1, 0)
+#define CM_GCR_REGn_MASK_CMTGT_DISABLED 0x0
+#define CM_GCR_REGn_MASK_CMTGT_MEM 0x1
+#define CM_GCR_REGn_MASK_CMTGT_IOCU0 0x2
+#define CM_GCR_REGn_MASK_CMTGT_IOCU1 0x3
+
+/* GCR_GIC_STATUS - Indicates presence of a Global Interrupt Controller (GIC) */
GCR_ACCESSOR_RO(32, 0x0d0, gic_status)
+#define CM_GCR_GIC_STATUS_EX BIT(0)
+
+/* GCR_CPC_STATUS - Indicates presence of a Cluster Power Controller (CPC) */
GCR_ACCESSOR_RO(32, 0x0f0, cpc_status)
+#define CM_GCR_CPC_STATUS_EX BIT(0)
+
+/* GCR_L2_CONFIG - Indicates L2 cache configuration when Config5.L2C=1 */
GCR_ACCESSOR_RW(32, 0x130, l2_config)
+#define CM_GCR_L2_CONFIG_BYPASS BIT(20)
+#define CM_GCR_L2_CONFIG_SET_SIZE GENMASK(15, 12)
+#define CM_GCR_L2_CONFIG_LINE_SIZE GENMASK(11, 8)
+#define CM_GCR_L2_CONFIG_ASSOC GENMASK(7, 0)
+
+/* GCR_SYS_CONFIG2 - Further information about the system */
GCR_ACCESSOR_RO(32, 0x150, sys_config2)
+#define CM_GCR_SYS_CONFIG2_MAXVPW GENMASK(3, 0)
+
+/* GCR_L2_PFT_CONTROL - Controls hardware L2 prefetching */
GCR_ACCESSOR_RW(32, 0x300, l2_pft_control)
+#define CM_GCR_L2_PFT_CONTROL_PAGEMASK GENMASK(31, 12)
+#define CM_GCR_L2_PFT_CONTROL_PFTEN BIT(8)
+#define CM_GCR_L2_PFT_CONTROL_NPFT GENMASK(7, 0)
+
+/* GCR_L2_PFT_CONTROL_B - Controls hardware L2 prefetching */
GCR_ACCESSOR_RW(32, 0x308, l2_pft_control_b)
+#define CM_GCR_L2_PFT_CONTROL_B_CEN BIT(8)
+#define CM_GCR_L2_PFT_CONTROL_B_PORTID GENMASK(7, 0)
+
+/* GCR_BEV_BASE - Controls the location of the BEV for powered up cores */
GCR_ACCESSOR_RW(64, 0x680, bev_base)
-/* Core Local & Core Other register accessor functions */
+/* GCR_Cx_RESET_RELEASE - Controls core reset for CM 1.x */
GCR_CX_ACCESSOR_RW(32, 0x000, reset_release)
-GCR_CX_ACCESSOR_RW(32, 0x008, coherence)
-GCR_CX_ACCESSOR_RO(32, 0x010, config)
-GCR_CX_ACCESSOR_RW(32, 0x018, other)
-GCR_CX_ACCESSOR_RW(32, 0x020, reset_base)
-GCR_CX_ACCESSOR_RO(32, 0x028, id)
-GCR_CX_ACCESSOR_RW(32, 0x030, reset_ext_base)
-
-/* GCR_CONFIG register fields */
-#define CM_GCR_CONFIG_NUMIOCU_SHF 8
-#define CM_GCR_CONFIG_NUMIOCU_MSK (_ULCAST_(0xf) << 8)
-#define CM_GCR_CONFIG_PCORES_SHF 0
-#define CM_GCR_CONFIG_PCORES_MSK (_ULCAST_(0xff) << 0)
-
-/* GCR_BASE register fields */
-#define CM_GCR_BASE_GCRBASE_SHF 15
-#define CM_GCR_BASE_GCRBASE_MSK (_ULCAST_(0x1ffff) << 15)
-#define CM_GCR_BASE_CMDEFTGT_SHF 0
-#define CM_GCR_BASE_CMDEFTGT_MSK (_ULCAST_(0x3) << 0)
-#define CM_GCR_BASE_CMDEFTGT_DISABLED 0
-#define CM_GCR_BASE_CMDEFTGT_MEM 1
-#define CM_GCR_BASE_CMDEFTGT_IOCU0 2
-#define CM_GCR_BASE_CMDEFTGT_IOCU1 3
-/* GCR_RESET_EXT_BASE register fields */
-#define CM_GCR_RESET_EXT_BASE_EVARESET BIT(31)
-#define CM_GCR_RESET_EXT_BASE_UEB BIT(30)
+/* GCR_Cx_COHERENCE - Controls core coherence */
+GCR_CX_ACCESSOR_RW(32, 0x008, coherence)
+#define CM_GCR_Cx_COHERENCE_COHDOMAINEN GENMASK(7, 0)
+#define CM3_GCR_Cx_COHERENCE_COHEN BIT(0)
-/* GCR_ACCESS register fields */
-#define CM_GCR_ACCESS_ACCESSEN_SHF 0
-#define CM_GCR_ACCESS_ACCESSEN_MSK (_ULCAST_(0xff) << 0)
+/* GCR_Cx_CONFIG - Information about a core's configuration */
+GCR_CX_ACCESSOR_RO(32, 0x010, config)
+#define CM_GCR_Cx_CONFIG_IOCUTYPE GENMASK(11, 10)
+#define CM_GCR_Cx_CONFIG_PVPE GENMASK(9, 0)
-/* GCR_REV register fields */
-#define CM_GCR_REV_MAJOR_SHF 8
-#define CM_GCR_REV_MAJOR_MSK (_ULCAST_(0xff) << 8)
-#define CM_GCR_REV_MINOR_SHF 0
-#define CM_GCR_REV_MINOR_MSK (_ULCAST_(0xff) << 0)
+/* GCR_Cx_OTHER - Configure the core-other/redirect GCR block */
+GCR_CX_ACCESSOR_RW(32, 0x018, other)
+#define CM_GCR_Cx_OTHER_CORENUM GENMASK(31, 16)
+#define CM3_GCR_Cx_OTHER_CORE GENMASK(13, 8)
+#define CM3_GCR_Cx_OTHER_VP GENMASK(2, 0)
-#define CM_ENCODE_REV(major, minor) \
- (((major) << CM_GCR_REV_MAJOR_SHF) | \
- ((minor) << CM_GCR_REV_MINOR_SHF))
+/* GCR_Cx_RESET_BASE - Configure where powered up cores will fetch from */
+GCR_CX_ACCESSOR_RW(32, 0x020, reset_base)
+#define CM_GCR_Cx_RESET_BASE_BEVEXCBASE GENMASK(31, 12)
-#define CM_REV_CM2 CM_ENCODE_REV(6, 0)
-#define CM_REV_CM2_5 CM_ENCODE_REV(7, 0)
-#define CM_REV_CM3 CM_ENCODE_REV(8, 0)
+/* GCR_Cx_ID - Identify the current core */
+GCR_CX_ACCESSOR_RO(32, 0x028, id)
-/* GCR_ERR_CONTROL register fields */
-#define CM_GCR_ERR_CONTROL_L2_ECC_EN_SHF 1
-#define CM_GCR_ERR_CONTROL_L2_ECC_EN_MSK (_ULCAST_(0x1) << 1)
-#define CM_GCR_ERR_CONTROL_L2_ECC_SUPPORT_SHF 0
-#define CM_GCR_ERR_CONTROL_L2_ECC_SUPPORT_MSK (_ULCAST_(0x1) << 0)
-
-/* GCR_ERROR_CAUSE register fields */
-#define CM_GCR_ERROR_CAUSE_ERRTYPE_SHF 27
-#define CM_GCR_ERROR_CAUSE_ERRTYPE_MSK (_ULCAST_(0x1f) << 27)
-#define CM3_GCR_ERROR_CAUSE_ERRTYPE_SHF 58
-#define CM3_GCR_ERROR_CAUSE_ERRTYPE_MSK GENMASK_ULL(63, 58)
-#define CM_GCR_ERROR_CAUSE_ERRINFO_SHF 0
-#define CM_GCR_ERROR_CAUSE_ERRINGO_MSK (_ULCAST_(0x7ffffff) << 0)
-
-/* GCR_ERROR_MULT register fields */
-#define CM_GCR_ERROR_MULT_ERR2ND_SHF 0
-#define CM_GCR_ERROR_MULT_ERR2ND_MSK (_ULCAST_(0x1f) << 0)
-
-/* GCR_L2_ONLY_SYNC_BASE register fields */
-#define CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE_SHF 12
-#define CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE_MSK (_ULCAST_(0xfffff) << 12)
-#define CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN_SHF 0
-#define CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN_MSK (_ULCAST_(0x1) << 0)
-
-/* GCR_GIC_BASE register fields */
-#define CM_GCR_GIC_BASE_GICBASE_SHF 17
-#define CM_GCR_GIC_BASE_GICBASE_MSK (_ULCAST_(0x7fff) << 17)
-#define CM_GCR_GIC_BASE_GICEN_SHF 0
-#define CM_GCR_GIC_BASE_GICEN_MSK (_ULCAST_(0x1) << 0)
-
-/* GCR_CPC_BASE register fields */
-#define CM_GCR_CPC_BASE_CPCBASE_SHF 15
-#define CM_GCR_CPC_BASE_CPCBASE_MSK (_ULCAST_(0x1ffff) << 15)
-#define CM_GCR_CPC_BASE_CPCEN_SHF 0
-#define CM_GCR_CPC_BASE_CPCEN_MSK (_ULCAST_(0x1) << 0)
-
-/* GCR_GIC_STATUS register fields */
-#define CM_GCR_GIC_STATUS_GICEX_SHF 0
-#define CM_GCR_GIC_STATUS_GICEX_MSK (_ULCAST_(0x1) << 0)
-
-/* GCR_REGn_BASE register fields */
-#define CM_GCR_REGn_BASE_BASEADDR_SHF 16
-#define CM_GCR_REGn_BASE_BASEADDR_MSK (_ULCAST_(0xffff) << 16)
-
-/* GCR_REGn_MASK register fields */
-#define CM_GCR_REGn_MASK_ADDRMASK_SHF 16
-#define CM_GCR_REGn_MASK_ADDRMASK_MSK (_ULCAST_(0xffff) << 16)
-#define CM_GCR_REGn_MASK_CCAOVR_SHF 5
-#define CM_GCR_REGn_MASK_CCAOVR_MSK (_ULCAST_(0x3) << 5)
-#define CM_GCR_REGn_MASK_CCAOVREN_SHF 4
-#define CM_GCR_REGn_MASK_CCAOVREN_MSK (_ULCAST_(0x1) << 4)
-#define CM_GCR_REGn_MASK_DROPL2_SHF 2
-#define CM_GCR_REGn_MASK_DROPL2_MSK (_ULCAST_(0x1) << 2)
-#define CM_GCR_REGn_MASK_CMTGT_SHF 0
-#define CM_GCR_REGn_MASK_CMTGT_MSK (_ULCAST_(0x3) << 0)
-#define CM_GCR_REGn_MASK_CMTGT_DISABLED (_ULCAST_(0x0) << 0)
-#define CM_GCR_REGn_MASK_CMTGT_MEM (_ULCAST_(0x1) << 0)
-#define CM_GCR_REGn_MASK_CMTGT_IOCU0 (_ULCAST_(0x2) << 0)
-#define CM_GCR_REGn_MASK_CMTGT_IOCU1 (_ULCAST_(0x3) << 0)
-
-/* GCR_GIC_STATUS register fields */
-#define CM_GCR_GIC_STATUS_EX_SHF 0
-#define CM_GCR_GIC_STATUS_EX_MSK (_ULCAST_(0x1) << 0)
-
-/* GCR_CPC_STATUS register fields */
-#define CM_GCR_CPC_STATUS_EX_SHF 0
-#define CM_GCR_CPC_STATUS_EX_MSK (_ULCAST_(0x1) << 0)
-
-/* GCR_L2_CONFIG register fields */
-#define CM_GCR_L2_CONFIG_BYPASS_SHF 20
-#define CM_GCR_L2_CONFIG_BYPASS_MSK (_ULCAST_(0x1) << 20)
-#define CM_GCR_L2_CONFIG_SET_SIZE_SHF 12
-#define CM_GCR_L2_CONFIG_SET_SIZE_MSK (_ULCAST_(0xf) << 12)
-#define CM_GCR_L2_CONFIG_LINE_SIZE_SHF 8
-#define CM_GCR_L2_CONFIG_LINE_SIZE_MSK (_ULCAST_(0xf) << 8)
-#define CM_GCR_L2_CONFIG_ASSOC_SHF 0
-#define CM_GCR_L2_CONFIG_ASSOC_MSK (_ULCAST_(0xff) << 0)
-
-/* GCR_SYS_CONFIG2 register fields */
-#define CM_GCR_SYS_CONFIG2_MAXVPW_SHF 0
-#define CM_GCR_SYS_CONFIG2_MAXVPW_MSK (_ULCAST_(0xf) << 0)
-
-/* GCR_L2_PFT_CONTROL register fields */
-#define CM_GCR_L2_PFT_CONTROL_PAGEMASK_SHF 12
-#define CM_GCR_L2_PFT_CONTROL_PAGEMASK_MSK (_ULCAST_(0xfffff) << 12)
-#define CM_GCR_L2_PFT_CONTROL_PFTEN_SHF 8
-#define CM_GCR_L2_PFT_CONTROL_PFTEN_MSK (_ULCAST_(0x1) << 8)
-#define CM_GCR_L2_PFT_CONTROL_NPFT_SHF 0
-#define CM_GCR_L2_PFT_CONTROL_NPFT_MSK (_ULCAST_(0xff) << 0)
-
-/* GCR_L2_PFT_CONTROL_B register fields */
-#define CM_GCR_L2_PFT_CONTROL_B_CEN_SHF 8
-#define CM_GCR_L2_PFT_CONTROL_B_CEN_MSK (_ULCAST_(0x1) << 8)
-#define CM_GCR_L2_PFT_CONTROL_B_PORTID_SHF 0
-#define CM_GCR_L2_PFT_CONTROL_B_PORTID_MSK (_ULCAST_(0xff) << 0)
-
-/* GCR_Cx_COHERENCE register fields */
-#define CM_GCR_Cx_COHERENCE_COHDOMAINEN_SHF 0
-#define CM_GCR_Cx_COHERENCE_COHDOMAINEN_MSK (_ULCAST_(0xff) << 0)
-#define CM3_GCR_Cx_COHERENCE_COHEN_MSK (_ULCAST_(0x1) << 0)
-
-/* GCR_Cx_CONFIG register fields */
-#define CM_GCR_Cx_CONFIG_IOCUTYPE_SHF 10
-#define CM_GCR_Cx_CONFIG_IOCUTYPE_MSK (_ULCAST_(0x3) << 10)
-#define CM_GCR_Cx_CONFIG_PVPE_SHF 0
-#define CM_GCR_Cx_CONFIG_PVPE_MSK (_ULCAST_(0x3ff) << 0)
-
-/* GCR_Cx_OTHER register fields */
-#define CM_GCR_Cx_OTHER_CORENUM_SHF 16
-#define CM_GCR_Cx_OTHER_CORENUM_MSK (_ULCAST_(0xffff) << 16)
-#define CM3_GCR_Cx_OTHER_CORE_SHF 8
-#define CM3_GCR_Cx_OTHER_CORE_MSK (_ULCAST_(0x3f) << 8)
-#define CM3_GCR_Cx_OTHER_VP_SHF 0
-#define CM3_GCR_Cx_OTHER_VP_MSK (_ULCAST_(0x7) << 0)
-
-/* GCR_Cx_RESET_BASE register fields */
-#define CM_GCR_Cx_RESET_BASE_BEVEXCBASE_SHF 12
-#define CM_GCR_Cx_RESET_BASE_BEVEXCBASE_MSK (_ULCAST_(0xfffff) << 12)
-
-/* GCR_Cx_RESET_EXT_BASE register fields */
-#define CM_GCR_Cx_RESET_EXT_BASE_EVARESET_SHF 31
-#define CM_GCR_Cx_RESET_EXT_BASE_EVARESET_MSK (_ULCAST_(0x1) << 31)
-#define CM_GCR_Cx_RESET_EXT_BASE_UEB_SHF 30
-#define CM_GCR_Cx_RESET_EXT_BASE_UEB_MSK (_ULCAST_(0x1) << 30)
-#define CM_GCR_Cx_RESET_EXT_BASE_BEVEXCMASK_SHF 20
-#define CM_GCR_Cx_RESET_EXT_BASE_BEVEXCMASK_MSK (_ULCAST_(0xff) << 20)
-#define CM_GCR_Cx_RESET_EXT_BASE_BEVEXCPA_SHF 1
-#define CM_GCR_Cx_RESET_EXT_BASE_BEVEXCPA_MSK (_ULCAST_(0x7f) << 1)
-#define CM_GCR_Cx_RESET_EXT_BASE_PRESENT_SHF 0
-#define CM_GCR_Cx_RESET_EXT_BASE_PRESENT_MSK (_ULCAST_(0x1) << 0)
+/* GCR_Cx_RESET_EXT_BASE - Configure behaviour when cores reset or power up */
+GCR_CX_ACCESSOR_RW(32, 0x030, reset_ext_base)
+#define CM_GCR_Cx_RESET_EXT_BASE_EVARESET BIT(31)
+#define CM_GCR_Cx_RESET_EXT_BASE_UEB BIT(30)
+#define CM_GCR_Cx_RESET_EXT_BASE_BEVEXCMASK GENMASK(27, 20)
+#define CM_GCR_Cx_RESET_EXT_BASE_BEVEXCPA GENMASK(7, 1)
+#define CM_GCR_Cx_RESET_EXT_BASE_PRESENT BIT(0)
/**
* mips_cm_numcores - return the number of cores present in the system
if (!mips_cm_present())
return 0;
- return ((read_gcr_config() & CM_GCR_CONFIG_PCORES_MSK)
- >> CM_GCR_CONFIG_PCORES_SHF) + 1;
+ return ((read_gcr_config() & CM_GCR_CONFIG_PCORES)
+ >> __ffs(CM_GCR_CONFIG_PCORES)) + 1;
}
/**
if (!mips_cm_present())
return 0;
- return (read_gcr_config() & CM_GCR_CONFIG_NUMIOCU_MSK)
- >> CM_GCR_CONFIG_NUMIOCU_SHF;
+ return (read_gcr_config() & CM_GCR_CONFIG_NUMIOCU)
+ >> __ffs(CM_GCR_CONFIG_NUMIOCU);
}
/**
uint32_t cfg;
if (mips_cm_revision() >= CM_REV_CM3)
- return read_gcr_sys_config2() & CM_GCR_SYS_CONFIG2_MAXVPW_MSK;
+ return read_gcr_sys_config2() & CM_GCR_SYS_CONFIG2_MAXVPW;
if (mips_cm_present()) {
/*
* number of VP(E)s, and if that ever changes then this will
* need revisiting.
*/
- cfg = read_gcr_cl_config() & CM_GCR_Cx_CONFIG_PVPE_MSK;
- return (cfg >> CM_GCR_Cx_CONFIG_PVPE_SHF) + 1;
+ cfg = read_gcr_cl_config() & CM_GCR_Cx_CONFIG_PVPE;
+ return (cfg >> __ffs(CM_GCR_Cx_CONFIG_PVPE)) + 1;
}
if (IS_ENABLED(CONFIG_SMP))
* current location.
*/
base_reg = read_gcr_l2_only_sync_base();
- if (base_reg & CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN_MSK)
- return base_reg & CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE_MSK;
+ if (base_reg & CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN)
+ return base_reg & CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE;
/* Default to following the CM */
return mips_cm_phys_base() + MIPS_CM_GCR_SIZE;
phys_addr_t addr;
/* L2-only sync was introduced with CM major revision 6 */
- major_rev = (read_gcr_rev() & CM_GCR_REV_MAJOR_MSK) >>
- CM_GCR_REV_MAJOR_SHF;
+ major_rev = (read_gcr_rev() & CM_GCR_REV_MAJOR) >>
+ __ffs(CM_GCR_REV_MAJOR);
if (major_rev < 6)
return;
/* Find a location for the L2 sync region */
addr = mips_cm_l2sync_phys_base();
- BUG_ON((addr & CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE_MSK) != addr);
+ BUG_ON((addr & CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE) != addr);
if (!addr)
return;
/* Set the region base address & enable it */
- write_gcr_l2_only_sync_base(addr | CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN_MSK);
+ write_gcr_l2_only_sync_base(addr | CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN);
/* Map the region */
mips_cm_l2sync_base = ioremap_nocache(addr, MIPS_CM_L2SYNC_SIZE);
return 0;
addr = mips_cm_phys_base();
- BUG_ON((addr & CM_GCR_BASE_GCRBASE_MSK) != addr);
+ BUG_ON((addr & CM_GCR_BASE_GCRBASE) != addr);
if (!addr)
return -ENODEV;
/* sanity check that we're looking at a CM */
base_reg = read_gcr_base();
- if ((base_reg & CM_GCR_BASE_GCRBASE_MSK) != addr) {
+ if ((base_reg & CM_GCR_BASE_GCRBASE) != addr) {
pr_err("GCRs appear to have been moved (expected them at 0x%08lx)!\n",
(unsigned long)addr);
mips_gcr_base = NULL;
}
/* set default target to memory */
- base_reg &= ~CM_GCR_BASE_CMDEFTGT_MSK;
+ base_reg &= ~CM_GCR_BASE_CMDEFTGT;
base_reg |= CM_GCR_BASE_CMDEFTGT_MEM;
write_gcr_base(base_reg);
/* disable CM regions */
- write_gcr_reg0_base(CM_GCR_REGn_BASE_BASEADDR_MSK);
- write_gcr_reg0_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK);
- write_gcr_reg1_base(CM_GCR_REGn_BASE_BASEADDR_MSK);
- write_gcr_reg1_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK);
- write_gcr_reg2_base(CM_GCR_REGn_BASE_BASEADDR_MSK);
- write_gcr_reg2_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK);
- write_gcr_reg3_base(CM_GCR_REGn_BASE_BASEADDR_MSK);
- write_gcr_reg3_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK);
+ write_gcr_reg0_base(CM_GCR_REGn_BASE_BASEADDR);
+ write_gcr_reg0_mask(CM_GCR_REGn_MASK_ADDRMASK);
+ write_gcr_reg1_base(CM_GCR_REGn_BASE_BASEADDR);
+ write_gcr_reg1_mask(CM_GCR_REGn_MASK_ADDRMASK);
+ write_gcr_reg2_base(CM_GCR_REGn_BASE_BASEADDR);
+ write_gcr_reg2_mask(CM_GCR_REGn_MASK_ADDRMASK);
+ write_gcr_reg3_base(CM_GCR_REGn_BASE_BASEADDR);
+ write_gcr_reg3_mask(CM_GCR_REGn_MASK_ADDRMASK);
/* probe for an L2-only sync region */
mips_cm_probe_l2sync();
preempt_disable();
if (mips_cm_revision() >= CM_REV_CM3) {
- val = core << CM3_GCR_Cx_OTHER_CORE_SHF;
- val |= vp << CM3_GCR_Cx_OTHER_VP_SHF;
+ val = core << __ffs(CM3_GCR_Cx_OTHER_CORE);
+ val |= vp << __ffs(CM3_GCR_Cx_OTHER_VP);
/*
* We need to disable interrupts in SMP systems in order to
spin_lock_irqsave(&per_cpu(cm_core_lock, curr_core),
per_cpu(cm_core_lock_flags, curr_core));
- val = core << CM_GCR_Cx_OTHER_CORENUM_SHF;
+ val = core << __ffs(CM_GCR_Cx_OTHER_CORENUM);
}
write_gcr_cl_other(val);
cm_other = read_gcr_error_mult();
if (revision < CM_REV_CM3) { /* CM2 */
- cause = cm_error >> CM_GCR_ERROR_CAUSE_ERRTYPE_SHF;
- ocause = cm_other >> CM_GCR_ERROR_MULT_ERR2ND_SHF;
+ cause = cm_error >> __ffs(CM_GCR_ERROR_CAUSE_ERRTYPE);
+ ocause = cm_other >> __ffs(CM_GCR_ERROR_MULT_ERR2ND);
if (!cause)
return;
ulong core_id_bits, vp_id_bits, cmd_bits, cmd_group_bits;
ulong cm3_cca_bits, mcp_bits, cm3_tr_bits, sched_bit;
- cause = cm_error >> CM3_GCR_ERROR_CAUSE_ERRTYPE_SHF;
- ocause = cm_other >> CM_GCR_ERROR_MULT_ERR2ND_SHF;
+ cause = cm_error >> __ffs64(CM3_GCR_ERROR_CAUSE_ERRTYPE);
+ ocause = cm_other >> __ffs(CM_GCR_ERROR_MULT_ERR2ND);
if (!cause)
return;
projects / openwrt / staging / blogic.git / commitdiff