NFC: driver for TI shared transport
authorIlan Elias <ilane@ti.com>
Sun, 18 Sep 2011 08:19:36 +0000 (11:19 +0300)
committerJohn W. Linville <linville@tuxdriver.com>
Tue, 20 Sep 2011 18:43:49 +0000 (14:43 -0400)
Signed-off-by: Ilan Elias <ilane@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/nfc/Kconfig
drivers/nfc/Makefile
drivers/nfc/nfcwilink.c [new file with mode: 0644]

index 2acff4307ca401c70b40909826e9d5e1cccb6c3f..8a56fd3da98953aab54673022f71967c6af18572 100644 (file)
@@ -27,4 +27,15 @@ config NFC_PN533
          Say Y here to compile support for PN533 devices into the
          kernel or say M to compile it as module (pn533).
 
+config NFC_WILINK
+       tristate "Texas Instruments NFC WiLink driver"
+       depends on TI_ST
+       help
+         This enables the NFC driver for Texas Instrument's BT/FM/GPS/NFC
+         combo devices. This makes use of shared transport line discipline
+         core driver to communicate with the NFC core of the combo chip.
+
+         Say Y here to compile support for Texas Instrument's NFC WiLink driver
+         into the kernel or say M to compile it as module.
+
 endmenu
index 8ef446d2c1bd9f57206c8c48cba7a0487eb6d98a..ab99e8572f02a8f1cdb5ef389559e1a1ccb5dd37 100644 (file)
@@ -4,5 +4,6 @@
 
 obj-$(CONFIG_PN544_NFC)                += pn544.o
 obj-$(CONFIG_NFC_PN533)                += pn533.o
+obj-$(CONFIG_NFC_WILINK)       += nfcwilink.o
 
 ccflags-$(CONFIG_NFC_DEBUG) := -DDEBUG
diff --git a/drivers/nfc/nfcwilink.c b/drivers/nfc/nfcwilink.c
new file mode 100644 (file)
index 0000000..5b0f1ff
--- /dev/null
@@ -0,0 +1,342 @@
+/*
+ *  Texas Instrument's NFC Driver For Shared Transport.
+ *
+ *  NFC Driver acts as interface between NCI core and
+ *  TI Shared Transport Layer.
+ *
+ *  Copyright (C) 2011 Texas Instruments, Inc.
+ *
+ *  Written by Ilan Elias <ilane@ti.com>
+ *
+ *  Acknowledgements:
+ *  This file is based on btwilink.c, which was written
+ *  by Raja Mani and Pavan Savoy.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#include <linux/platform_device.h>
+#include <linux/nfc.h>
+#include <net/nfc/nci.h>
+#include <net/nfc/nci_core.h>
+#include <linux/ti_wilink_st.h>
+
+#define NFCWILINK_CHNL                 12
+#define NFCWILINK_OPCODE               7
+#define NFCWILINK_MAX_FRAME_SIZE       300
+#define NFCWILINK_HDR_LEN              4
+#define NFCWILINK_OFFSET_LEN_IN_HDR    1
+#define NFCWILINK_LEN_SIZE             2
+#define NFCWILINK_REGISTER_TIMEOUT     8000    /* 8 sec */
+
+struct nfcwilink_hdr {
+       u8 chnl;
+       u8 opcode;
+       u16 len;
+} __packed;
+
+struct nfcwilink {
+       struct platform_device          *pdev;
+       struct nci_dev                  *ndev;
+       unsigned long                   flags;
+
+       char                            st_register_cb_status;
+       long                            (*st_write) (struct sk_buff *);
+       struct completion               st_register_completed;
+};
+
+/* NFCWILINK driver flags */
+enum {
+       NFCWILINK_RUNNING,
+};
+
+/* Called by ST when registration is complete */
+static void nfcwilink_register_complete(void *priv_data, char data)
+{
+       struct nfcwilink *drv = priv_data;
+
+       nfc_dev_dbg(&drv->pdev->dev, "register_complete entry");
+
+       /* store ST registration status */
+       drv->st_register_cb_status = data;
+
+       /* complete the wait in nfc_st_open() */
+       complete(&drv->st_register_completed);
+}
+
+/* Called by ST when receive data is available */
+static long nfcwilink_receive(void *priv_data, struct sk_buff *skb)
+{
+       struct nfcwilink *drv = priv_data;
+       int rc;
+
+       nfc_dev_dbg(&drv->pdev->dev, "receive entry, len %d", skb->len);
+
+       if (!skb)
+               return -EFAULT;
+
+       if (!drv) {
+               kfree_skb(skb);
+               return -EFAULT;
+       }
+
+       /* strip the ST header
+       (apart for the chnl byte, which is not received in the hdr) */
+       skb_pull(skb, (NFCWILINK_HDR_LEN-1));
+
+       skb->dev = (void *) drv->ndev;
+
+       /* Forward skb to NCI core layer */
+       rc = nci_recv_frame(skb);
+       if (rc < 0) {
+               nfc_dev_err(&drv->pdev->dev, "nci_recv_frame failed %d", rc);
+               return rc;
+       }
+
+       return 0;
+}
+
+/* protocol structure registered with ST */
+static struct st_proto_s nfcwilink_proto = {
+       .chnl_id = NFCWILINK_CHNL,
+       .max_frame_size = NFCWILINK_MAX_FRAME_SIZE,
+       .hdr_len = (NFCWILINK_HDR_LEN-1),       /* not including chnl byte */
+       .offset_len_in_hdr = NFCWILINK_OFFSET_LEN_IN_HDR,
+       .len_size = NFCWILINK_LEN_SIZE,
+       .reserve = 0,
+       .recv = nfcwilink_receive,
+       .reg_complete_cb = nfcwilink_register_complete,
+       .write = NULL,
+};
+
+static int nfcwilink_open(struct nci_dev *ndev)
+{
+       struct nfcwilink *drv = nci_get_drvdata(ndev);
+       unsigned long comp_ret;
+       int rc;
+
+       nfc_dev_dbg(&drv->pdev->dev, "open entry");
+
+       if (test_and_set_bit(NFCWILINK_RUNNING, &drv->flags)) {
+               rc = -EBUSY;
+               goto exit;
+       }
+
+       nfcwilink_proto.priv_data = drv;
+
+       init_completion(&drv->st_register_completed);
+       drv->st_register_cb_status = -EINPROGRESS;
+
+       rc = st_register(&nfcwilink_proto);
+       if (rc < 0) {
+               if (rc == -EINPROGRESS) {
+                       comp_ret = wait_for_completion_timeout(
+                       &drv->st_register_completed,
+                       msecs_to_jiffies(NFCWILINK_REGISTER_TIMEOUT));
+
+                       nfc_dev_dbg(&drv->pdev->dev,
+                       "wait_for_completion_timeout returned %ld",
+                       comp_ret);
+
+                       if (comp_ret == 0) {
+                               /* timeout */
+                               rc = -ETIMEDOUT;
+                               goto clear_exit;
+                       } else if (drv->st_register_cb_status != 0) {
+                               rc = drv->st_register_cb_status;
+                               nfc_dev_err(&drv->pdev->dev,
+                               "st_register_cb failed %d", rc);
+                               goto clear_exit;
+                       }
+               } else {
+                       nfc_dev_err(&drv->pdev->dev,
+                               "st_register failed %d", rc);
+                       goto clear_exit;
+               }
+       }
+
+       /* st_register MUST fill the write callback */
+       BUG_ON(nfcwilink_proto.write == NULL);
+       drv->st_write = nfcwilink_proto.write;
+
+       goto exit;
+
+clear_exit:
+       clear_bit(NFCWILINK_RUNNING, &drv->flags);
+
+exit:
+       return rc;
+}
+
+static int nfcwilink_close(struct nci_dev *ndev)
+{
+       struct nfcwilink *drv = nci_get_drvdata(ndev);
+       int rc;
+
+       nfc_dev_dbg(&drv->pdev->dev, "close entry");
+
+       if (!test_and_clear_bit(NFCWILINK_RUNNING, &drv->flags))
+               return 0;
+
+       rc = st_unregister(&nfcwilink_proto);
+       if (rc)
+               nfc_dev_err(&drv->pdev->dev, "st_unregister failed %d", rc);
+
+       drv->st_write = NULL;
+
+       return rc;
+}
+
+static int nfcwilink_send(struct sk_buff *skb)
+{
+       struct nci_dev *ndev = (struct nci_dev *)skb->dev;
+       struct nfcwilink *drv = nci_get_drvdata(ndev);
+       struct nfcwilink_hdr hdr = {NFCWILINK_CHNL, NFCWILINK_OPCODE, 0x0000};
+       long len;
+
+       nfc_dev_dbg(&drv->pdev->dev, "send entry, len %d", skb->len);
+
+       if (!test_bit(NFCWILINK_RUNNING, &drv->flags))
+               return -EBUSY;
+
+       /* add the ST hdr to the start of the buffer */
+       hdr.len = skb->len;
+       memcpy(skb_push(skb, NFCWILINK_HDR_LEN), &hdr, NFCWILINK_HDR_LEN);
+
+       /* Insert skb to shared transport layer's transmit queue.
+        * Freeing skb memory is taken care in shared transport layer,
+        * so don't free skb memory here.
+        */
+       len = drv->st_write(skb);
+       if (len < 0) {
+               kfree_skb(skb);
+               nfc_dev_err(&drv->pdev->dev, "st_write failed %ld", len);
+               return -EFAULT;
+       }
+
+       return 0;
+}
+
+static struct nci_ops nfcwilink_ops = {
+       .open = nfcwilink_open,
+       .close = nfcwilink_close,
+       .send = nfcwilink_send,
+};
+
+static int nfcwilink_probe(struct platform_device *pdev)
+{
+       static struct nfcwilink *drv;
+       int rc;
+       u32 protocols;
+
+       nfc_dev_dbg(&pdev->dev, "probe entry");
+
+       drv = kzalloc(sizeof(struct nfcwilink), GFP_KERNEL);
+       if (!drv) {
+               rc = -ENOMEM;
+               goto exit;
+       }
+
+       drv->pdev = pdev;
+
+       protocols = NFC_PROTO_JEWEL_MASK
+                       | NFC_PROTO_MIFARE_MASK | NFC_PROTO_FELICA_MASK
+                       | NFC_PROTO_ISO14443_MASK
+                       | NFC_PROTO_NFC_DEP_MASK;
+
+       drv->ndev = nci_allocate_device(&nfcwilink_ops,
+                                       protocols,
+                                       NFCWILINK_HDR_LEN,
+                                       0);
+       if (!drv->ndev) {
+               nfc_dev_err(&pdev->dev, "nci_allocate_device failed");
+               rc = -ENOMEM;
+               goto free_exit;
+       }
+
+       nci_set_parent_dev(drv->ndev, &pdev->dev);
+       nci_set_drvdata(drv->ndev, drv);
+
+       rc = nci_register_device(drv->ndev);
+       if (rc < 0) {
+               nfc_dev_err(&pdev->dev, "nci_register_device failed %d", rc);
+               goto free_dev_exit;
+       }
+
+       dev_set_drvdata(&pdev->dev, drv);
+
+       goto exit;
+
+free_dev_exit:
+       nci_free_device(drv->ndev);
+
+free_exit:
+       kfree(drv);
+
+exit:
+       return rc;
+}
+
+static int nfcwilink_remove(struct platform_device *pdev)
+{
+       struct nfcwilink *drv = dev_get_drvdata(&pdev->dev);
+       struct nci_dev *ndev;
+
+       nfc_dev_dbg(&pdev->dev, "remove entry");
+
+       if (!drv)
+               return -EFAULT;
+
+       ndev = drv->ndev;
+
+       nci_unregister_device(ndev);
+       nci_free_device(ndev);
+
+       kfree(drv);
+
+       dev_set_drvdata(&pdev->dev, NULL);
+
+       return 0;
+}
+
+static struct platform_driver nfcwilink_driver = {
+       .probe = nfcwilink_probe,
+       .remove = nfcwilink_remove,
+       .driver = {
+               .name = "nfcwilink",
+               .owner = THIS_MODULE,
+       },
+};
+
+/* ------- Module Init/Exit interfaces ------ */
+static int __init nfcwilink_init(void)
+{
+       printk(KERN_INFO "NFC Driver for TI WiLink");
+
+       return platform_driver_register(&nfcwilink_driver);
+}
+
+static void __exit nfcwilink_exit(void)
+{
+       platform_driver_unregister(&nfcwilink_driver);
+}
+
+module_init(nfcwilink_init);
+module_exit(nfcwilink_exit);
+
+/* ------ Module Info ------ */
+
+MODULE_AUTHOR("Ilan Elias <ilane@ti.com>");
+MODULE_DESCRIPTION("NFC Driver for TI Shared Transport");
+MODULE_LICENSE("GPL");