brcm63xx: add basic support for the BCM96318REF board

Add basic support for the BCM96318REF board which is comprised of:
- HS-SPI flash support
- Ethernet switch support
- USB slave device support

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 39283

diff --git a/target/linux/brcm63xx/patches-3.10/555-board_96318ref.patch b/target/linux/brcm63xx/patches-3.10/555-board_96318ref.patch
new file mode 100644 (file)
index 0000000..fa476ed
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.10/555-board_96318ref.patch
@@ -0,0 +1,105 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -102,6 +102,92 @@ static struct board_info __initdata boar
+ #endif
+ 
+ /*
++ * known 6318 boards
++ */
++#ifdef CONFIG_BCM63XX_CPU_6318
++static struct board_info __initdata board_96318ref = {
++      .name                           = "96318REF",
++      .expected_cpu_id                = 0x6318,
++
++      .has_uart0                      = 1,
++      .has_pci                        = 1,
++
++      .has_usbd                       = 1,
++
++      .usbd = {
++              .use_fullspeed          = 0,
++              .port_no                = 0,
++      },
++
++      .has_enetsw                     = 1,
++
++      .has_ehci0                      = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++              },
++      },
++
++      .leds = {
++              {
++                      .name           = "96318REF:red:post-failed",
++                      .gpio           = 11,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "96318REF:green:inet",
++                      .gpio           = 8,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "96318REF:red:inet-fail",
++                      .gpio           = 9,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc                   = "wps",
++                      .gpio                   = 33,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_WPS_BUTTON,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc                   = "reset",
++                      .gpio                   = 34,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_RESTART,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
++#endif
++
++/*
+  * known 6328 boards
+  */
+ #ifdef CONFIG_BCM63XX_CPU_6328
+@@ -4034,6 +4120,9 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_3368
+       &board_cvg834g,
+ #endif
++#ifdef CONFIG_BCM63XX_CPU_6318
++      &board_96318ref,
++#endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
+       &board_96328A_1241N,

diff --git a/target/linux/brcm63xx/patches-3.10/801-ssb_export_fallback_sprom.patch b/target/linux/brcm63xx/patches-3.10/801-ssb_export_fallback_sprom.patch
index 58caf68a05963fca1a84e48fadbcd55683d0a8f1..5d5a1085d576d7ce24bdb00328e6592e31ae11bb 100644 (file)
--- a/target/linux/brcm63xx/patches-3.10/801-ssb_export_fallback_sprom.patch
+++ b/target/linux/brcm63xx/patches-3.10/801-ssb_export_fallback_sprom.patch
@@ -8,7 +8,7 @@
  #include <linux/spi/spi.h>
  #include <linux/spi/spi_gpio.h>
  #include <linux/spi/74x164.h>
-@@ -4113,7 +4114,7 @@ static const struct board_info __initcon
+@@ -4202,7 +4203,7 @@ static const struct board_info __initcon
   * bcm4318 WLAN work
   */
  #ifdef CONFIG_SSB_PCIHOST
@@ -17,7 +17,7 @@
        .revision               = 0x02,
        .board_rev              = 0x17,
        .country_code           = 0x0,
-@@ -4133,6 +4134,7 @@ static struct ssb_sprom bcm63xx_sprom =
+@@ -4222,6 +4223,7 @@ static struct ssb_sprom bcm63xx_sprom =
        .boardflags_lo          = 0x2848,
        .boardflags_hi          = 0x0000,
  };