#include <linux/err.h>
#include <linux/dma-mapping.h>
#include <linux/clk.h>
+#include <linux/atmel_pdc.h>
#include <linux/mmc/host.h>
#include <linux/mmc/protocol.h>
#include <asm/arch/cpu.h>
#include <asm/arch/gpio.h>
#include <asm/arch/at91_mci.h>
-#include <asm/arch/at91_pdc.h>
#define DRIVER_NAME "at91_mci"
/* Check to see if this needs filling */
if (i == 0) {
- if (at91_mci_read(host, AT91_PDC_RCR) != 0) {
+ if (at91_mci_read(host, ATMEL_PDC_RCR) != 0) {
pr_debug("Transfer active in current\n");
continue;
}
}
else {
- if (at91_mci_read(host, AT91_PDC_RNCR) != 0) {
+ if (at91_mci_read(host, ATMEL_PDC_RNCR) != 0) {
pr_debug("Transfer active in next\n");
continue;
}
pr_debug("dma address = %08X, length = %d\n", sg->dma_address, sg->length);
if (i == 0) {
- at91_mci_write(host, AT91_PDC_RPR, sg->dma_address);
- at91_mci_write(host, AT91_PDC_RCR, sg->length / 4);
+ at91_mci_write(host, ATMEL_PDC_RPR, sg->dma_address);
+ at91_mci_write(host, ATMEL_PDC_RCR, sg->length / 4);
}
else {
- at91_mci_write(host, AT91_PDC_RNPR, sg->dma_address);
- at91_mci_write(host, AT91_PDC_RNCR, sg->length / 4);
+ at91_mci_write(host, ATMEL_PDC_RNPR, sg->dma_address);
+ at91_mci_write(host, ATMEL_PDC_RNCR, sg->length / 4);
}
}
at91mci_pre_dma_read(host);
else {
at91_mci_write(host, AT91_MCI_IER, AT91_MCI_RXBUFF);
- at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
+ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
}
pr_debug("post dma read done\n");
pr_debug("Handling the transmit\n");
/* Disable the transfer */
- at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
+ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
/* Now wait for cmd ready */
at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_TXBUFE);
cmd->opcode, cmdr, cmd->arg, blocks, block_length, at91_mci_read(host, AT91_MCI_MR));
if (!data) {
- at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_TXTDIS | AT91_PDC_RXTDIS);
- at91_mci_write(host, AT91_PDC_RPR, 0);
- at91_mci_write(host, AT91_PDC_RCR, 0);
- at91_mci_write(host, AT91_PDC_RNPR, 0);
- at91_mci_write(host, AT91_PDC_RNCR, 0);
- at91_mci_write(host, AT91_PDC_TPR, 0);
- at91_mci_write(host, AT91_PDC_TCR, 0);
- at91_mci_write(host, AT91_PDC_TNPR, 0);
- at91_mci_write(host, AT91_PDC_TNCR, 0);
+ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTDIS | ATMEL_PDC_RXTDIS);
+ at91_mci_write(host, ATMEL_PDC_RPR, 0);
+ at91_mci_write(host, ATMEL_PDC_RCR, 0);
+ at91_mci_write(host, ATMEL_PDC_RNPR, 0);
+ at91_mci_write(host, ATMEL_PDC_RNCR, 0);
+ at91_mci_write(host, ATMEL_PDC_TPR, 0);
+ at91_mci_write(host, ATMEL_PDC_TCR, 0);
+ at91_mci_write(host, ATMEL_PDC_TNPR, 0);
+ at91_mci_write(host, ATMEL_PDC_TNCR, 0);
at91_mci_write(host, AT91_MCI_ARGR, cmd->arg);
at91_mci_write(host, AT91_MCI_CMDR, cmdr);
/*
* Disable the PDC controller
*/
- at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
+ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
if (cmdr & AT91_MCI_TRCMD_START) {
data->bytes_xfered = 0;
pr_debug("Transmitting %d bytes\n", host->total_length);
- at91_mci_write(host, AT91_PDC_TPR, host->physical_address);
- at91_mci_write(host, AT91_PDC_TCR, host->total_length / 4);
+ at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address);
+ at91_mci_write(host, ATMEL_PDC_TCR, host->total_length / 4);
ier = AT91_MCI_TXBUFE;
}
}
if (cmdr & AT91_MCI_TRCMD_START) {
if (cmdr & AT91_MCI_TRDIR)
- at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTEN);
+ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN);
else
- at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_TXTEN);
+ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN);
}
return ier;
}
+++ /dev/null
-/*
- * include/asm-arm/arch-at91/at91_pdc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Peripheral Data Controller (PDC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PDC_H
-#define AT91_PDC_H
-
-#define AT91_PDC_RPR 0x100 /* Receive Pointer Register */
-#define AT91_PDC_RCR 0x104 /* Receive Counter Register */
-#define AT91_PDC_TPR 0x108 /* Transmit Pointer Register */
-#define AT91_PDC_TCR 0x10c /* Transmit Counter Register */
-#define AT91_PDC_RNPR 0x110 /* Receive Next Pointer Register */
-#define AT91_PDC_RNCR 0x114 /* Receive Next Counter Register */
-#define AT91_PDC_TNPR 0x118 /* Transmit Next Pointer Register */
-#define AT91_PDC_TNCR 0x11c /* Transmit Next Counter Register */
-
-#define AT91_PDC_PTCR 0x120 /* Transfer Control Register */
-#define AT91_PDC_RXTEN (1 << 0) /* Receiver Transfer Enable */
-#define AT91_PDC_RXTDIS (1 << 1) /* Receiver Transfer Disable */
-#define AT91_PDC_TXTEN (1 << 8) /* Transmitter Transfer Enable */
-#define AT91_PDC_TXTDIS (1 << 9) /* Transmitter Transfer Disable */
-
-#define AT91_PDC_PTSR 0x124 /* Transfer Status Register */
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91/at91_pdc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Peripheral Data Controller (PDC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PDC_H
-#define AT91_PDC_H
-
-#define AT91_PDC_RPR 0x100 /* Receive Pointer Register */
-#define AT91_PDC_RCR 0x104 /* Receive Counter Register */
-#define AT91_PDC_TPR 0x108 /* Transmit Pointer Register */
-#define AT91_PDC_TCR 0x10c /* Transmit Counter Register */
-#define AT91_PDC_RNPR 0x110 /* Receive Next Pointer Register */
-#define AT91_PDC_RNCR 0x114 /* Receive Next Counter Register */
-#define AT91_PDC_TNPR 0x118 /* Transmit Next Pointer Register */
-#define AT91_PDC_TNCR 0x11c /* Transmit Next Counter Register */
-
-#define AT91_PDC_PTCR 0x120 /* Transfer Control Register */
-#define AT91_PDC_RXTEN (1 << 0) /* Receiver Transfer Enable */
-#define AT91_PDC_RXTDIS (1 << 1) /* Receiver Transfer Disable */
-#define AT91_PDC_TXTEN (1 << 8) /* Transmitter Transfer Enable */
-#define AT91_PDC_TXTDIS (1 << 9) /* Transmitter Transfer Disable */
-
-#define AT91_PDC_PTSR 0x124 /* Transfer Status Register */
-
-#endif
--- /dev/null
+/*
+ * include/linux/atmel_pdc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Peripheral Data Controller (PDC) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef ATMEL_PDC_H
+#define ATMEL_PDC_H
+
+#define ATMEL_PDC_RPR 0x100 /* Receive Pointer Register */
+#define ATMEL_PDC_RCR 0x104 /* Receive Counter Register */
+#define ATMEL_PDC_TPR 0x108 /* Transmit Pointer Register */
+#define ATMEL_PDC_TCR 0x10c /* Transmit Counter Register */
+#define ATMEL_PDC_RNPR 0x110 /* Receive Next Pointer Register */
+#define ATMEL_PDC_RNCR 0x114 /* Receive Next Counter Register */
+#define ATMEL_PDC_TNPR 0x118 /* Transmit Next Pointer Register */
+#define ATMEL_PDC_TNCR 0x11c /* Transmit Next Counter Register */
+
+#define ATMEL_PDC_PTCR 0x120 /* Transfer Control Register */
+#define ATMEL_PDC_RXTEN (1 << 0) /* Receiver Transfer Enable */
+#define ATMEL_PDC_RXTDIS (1 << 1) /* Receiver Transfer Disable */
+#define ATMEL_PDC_TXTEN (1 << 8) /* Transmitter Transfer Enable */
+#define ATMEL_PDC_TXTDIS (1 << 9) /* Transmitter Transfer Disable */
+
+#define ATMEL_PDC_PTSR 0x124 /* Transfer Status Register */
+
+#endif