linksys_mx5300 \
netgear_lbr20 \
netgear_rax120v2 \
+ netgear_wax214 \
netgear_wax218 \
netgear_wax620 \
netgear_wax630 \
$(eval $(call generate-ipq-wifi-package,linksys_mx5300,Linksys MX5300))
$(eval $(call generate-ipq-wifi-package,netgear_lbr20,Netgear LBR20))
$(eval $(call generate-ipq-wifi-package,netgear_rax120v2,Netgear RAX120v2))
+$(eval $(call generate-ipq-wifi-package,netgear_wax214,Netgear WAX214))
$(eval $(call generate-ipq-wifi-package,netgear_wax218,Netgear WAX218))
$(eval $(call generate-ipq-wifi-package,netgear_wax620,Netgear WAX620))
$(eval $(call generate-ipq-wifi-package,netgear_wax630,Netgear WAX630))
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+)
+
+/dts-v1/;
+
+#include "ipq6018.dtsi"
+#include "ipq6018-cp-cpu.dtsi"
+#include "ipq6018-ess.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Netgear WAX214";
+ compatible = "netgear,wax214", "qcom,ipq6018";
+
+ aliases {
+ serial0 = &blsp1_uart3;
+ ethernet0 = &dp3;
+ label-mac-device = &dp3;
+ led-boot = &pwr;
+ led-failsafe = &pwr;
+ led-running = &pwr;
+ led-upgrade = &pwr;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ bootargs-append = " root=/dev/ubiblock0_1";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pwr: pwr {
+ color = <LED_COLOR_ID_ORANGE>;
+ function = LED_FUNCTION_POWER;
+ gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_LAN;
+ gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan2g {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_WLAN;
+ function-enumerator = <0>;
+ gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0radio";
+ };
+
+ wlan5g {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_WLAN;
+ function-enumerator = <1>;
+ gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy1radio";
+ };
+ };
+};
+
+&blsp1_uart3 {
+ pinctrl-0 = <&serial_3_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&tlmm {
+ mdio_pins: mdio-pins {
+ mdc {
+ pins = "gpio64";
+ function = "mdc";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ mdio {
+ pins = "gpio65";
+ function = "mdio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
+};
+
+&dp3 {
+ status = "okay";
+
+ phy-handle = <&qca8072_4>;
+ label = "lan";
+};
+
+&edma {
+ status = "okay";
+};
+
+&mdio {
+ status = "okay";
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <10000>;
+ reset-post-delay-us = <50000>;
+
+ ethernet-phy-package@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "qcom,qca8075-package";
+ reg = <0>;
+
+ qcom,package-mode = "psgmii";
+
+ qca8072_4: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <4>;
+ };
+ };
+};
+
+&switch {
+ status = "okay";
+
+ switch_lan_bmp = <ESS_PORT3>;
+ switch_mac_mode = <MAC_MODE_PSGMII>;
+ port3_pcs_channel = <4>;
+
+ qcom,port_phyinfo {
+ port@3 {
+ port_id = <3>;
+ phy_address = <4>;
+ };
+ };
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&qpic_nand {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+
+ partitions {
+ compatible = "qcom,smem-part";
+ };
+ };
+};
+
+
+&wifi {
+ status = "okay";
+ qcom,ath11k-fw-memory-mode = <1>;
+ qcom,ath11k-calibration-variant = "Netgear-WAX214";
+};
\ No newline at end of file
projects / openwrt / staging / nbd.git / commitdiff