# nat
# kernel only
-$(eval $(if $(NF_KMOD),$(call nf_add,IPT_NAT,CONFIG_NF_NAT, $(P_V4)nf_nat $(P_V4)iptable_nat),))
+ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,3.7.0)),1)
+ $(eval $(if $(NF_KMOD),$(call nf_add,IPT_NAT,CONFIG_NF_NAT, $(P_XT)nf_nat $(P_V4)iptable_nat),))
+else
+ $(eval $(if $(NF_KMOD),$(call nf_add,IPT_NAT,CONFIG_NF_NAT, $(P_V4)nf_nat $(P_V4)iptable_nat),))
+endif
# userland only
$(eval $(if $(NF_KMOD),,$(call nf_add,IPT_NAT,CONFIG_NF_NAT, ipt_SNAT ipt_DNAT)))
$(eval $(call nf_add,IPT_NATHELPER,CONFIG_IP_NF_NAT_FTP, $(P_V4)ip_nat_ftp))
$(eval $(call nf_add,IPT_NATHELPER,CONFIG_NF_CONNTRACK_FTP, $(P_XT)nf_conntrack_ftp))
-$(eval $(call nf_add,IPT_NATHELPER,CONFIG_NF_NAT_FTP, $(P_V4)nf_nat_ftp))
+ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,3.7.0)),1)
+ $(eval $(call nf_add,IPT_NATHELPER,CONFIG_NF_NAT_FTP, $(P_XT)nf_nat_ftp))
+ $(eval $(call nf_add,IPT_NATHELPER,CONFIG_NF_NAT_IRC, $(P_XT)nf_nat_irc))
+else
+ $(eval $(call nf_add,IPT_NATHELPER,CONFIG_NF_NAT_FTP, $(P_V4)nf_nat_ftp))
+ $(eval $(call nf_add,IPT_NATHELPER,CONFIG_NF_NAT_IRC, $(P_V4)nf_nat_irc))
+endif
$(eval $(call nf_add,IPT_NATHELPER,CONFIG_NF_CONNTRACK_IRC, $(P_XT)nf_conntrack_irc))
-$(eval $(call nf_add,IPT_NATHELPER,CONFIG_NF_NAT_IRC, $(P_V4)nf_nat_irc))
# nathelper-extra
--- /dev/null
+CONFIG_32BIT=y
+# CONFIG_6PACK is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_9P_FS is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_AB8500_CORE is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_ACENIC is not set
+# CONFIG_ACERHDF is not set
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_ACPI_APEI is not set
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+# CONFIG_ACPI_HED is not set
+# CONFIG_ACPI_POWER_METER is not set
+# CONFIG_ACPI_QUICKSTART is not set
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_ADFS_FS is not set
+# CONFIG_ADIS16255 is not set
+# CONFIG_ADM6996_PHY is not set
+# CONFIG_ADM8211 is not set
+CONFIG_AEABI=y
+# CONFIG_AFFS_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_AGP is not set
+CONFIG_AIO=y
+# CONFIG_AIRO is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_ALTERA_STAPL is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_AMD_PHY is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_AMILO_RFKILL is not set
+# CONFIG_ANDROID is not set
+CONFIG_ANON_INODES=y
+# CONFIG_APDS9802ALS is not set
+# CONFIG_APM8018X is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_AR7 is not set
+# CONFIG_AR8216_PHY is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCM2835 is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_EXYNOS is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+# CONFIG_ARCH_HIGHBANK is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_MULTIPLATFORM is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MVEBU is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_MXS is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+# CONFIG_ARCH_PICOXCELL is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PRIMA2 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_S3C24XX is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_SIRF is not set
+# CONFIG_ARCH_SOCFPGA is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+# CONFIG_ARCH_VT8500 is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_ZYNQ is not set
+# CONFIG_ARCNET is not set
+CONFIG_ARM_CPU_TOPOLOGY=y
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
+# CONFIG_ARM_ERRATA_411920 is not set
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+# CONFIG_ARM_UNWIND is not set
+CONFIG_ARPD=y
+# CONFIG_ARTHUR is not set
+# CONFIG_ASUS_OLED is not set
+# CONFIG_ASYNC_RAID6_TEST is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_AT803X_PHY is not set
+# CONFIG_ATA is not set
+# CONFIG_ATALK is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_ATA_ACPI is not set
+CONFIG_ATA_BMDMA=y
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_ATA_PIIX is not set
+CONFIG_ATA_SFF=y
+# CONFIG_ATA_VERBOSE_ERROR is not set
+# CONFIG_ATH5K is not set
+# CONFIG_ATH6K_LEGACY is not set
+# CONFIG_ATH79 is not set
+# CONFIG_ATH9K is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1C is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL2 is not set
+# CONFIG_ATM is not set
+# CONFIG_ATMEL is not set
+# CONFIG_ATMEL_PWM is not set
+# CONFIG_ATM_AMBASSADOR is not set
+# CONFIG_ATM_BR2684 is not set
+CONFIG_ATM_BR2684_IPFILTER=y
+# CONFIG_ATM_CLIP is not set
+CONFIG_ATM_CLIP_NO_ICMP=y
+# CONFIG_ATM_DRIVERS is not set
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATM_ENI is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_FORE200E is not set
+# CONFIG_ATM_HE is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_IA is not set
+# CONFIG_ATM_IDT77252 is not set
+# CONFIG_ATM_LANAI is not set
+# CONFIG_ATM_LANE is not set
+# CONFIG_ATM_MPOA is not set
+# CONFIG_ATM_NICSTAR is not set
+# CONFIG_ATM_SOLOS is not set
+# CONFIG_ATM_TCP is not set
+# CONFIG_ATM_ZATM is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_ATP is not set
+# CONFIG_AUDIT is not set
+# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_AUTO_ZRELADDR is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_AVERAGE is not set
+# CONFIG_AX25 is not set
+# CONFIG_AX25_DAMA_SLAVE is not set
+# CONFIG_AX88796 is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_B44 is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+CONFIG_BASE_FULL=y
+CONFIG_BASE_SMALL=0
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2780 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_BATTERY_MAX17042 is not set
+# CONFIG_BATTERY_SBS is not set
+# CONFIG_BAYCOM_EPP is not set
+# CONFIG_BAYCOM_PAR is not set
+# CONFIG_BAYCOM_SER_FDX is not set
+# CONFIG_BAYCOM_SER_HDX is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
+# CONFIG_BCM63XX_PHY is not set
+# CONFIG_BCM87XX_PHY is not set
+# CONFIG_BCMA is not set
+# CONFIG_BCM_WIMAX is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BE2ISCSI is not set
+# CONFIG_BE2NET is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_BINARY_PRINTF is not set
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_BITREVERSE=y
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_ATIIXP is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_BSGLIB is not set
+# CONFIG_BLK_DEV_CMD640 is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_CS5535 is not set
+# CONFIG_BLK_DEV_CS5536 is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_DELKIN is not set
+# CONFIG_BLK_DEV_DRBD is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_IDEACPI is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_NVME is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_BLK_DEV_RZ1000 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SIS5513 is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_BLOCK=y
+# CONFIG_BMP085 is not set
+# CONFIG_BMP085_I2C is not set
+# CONFIG_BMP085_SPI is not set
+# CONFIG_BNA is not set
+# CONFIG_BNX2 is not set
+# CONFIG_BNX2X is not set
+# CONFIG_BONDING is not set
+# CONFIG_BOOKE_WDT is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+CONFIG_BOOT_RAW=y
+# CONFIG_BPCTL is not set
+# CONFIG_BPF_JIT is not set
+# CONFIG_BPQETHER is not set
+CONFIG_BQL=y
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_BRCMFMAC is not set
+CONFIG_BRIDGE=y
+# CONFIG_BRIDGE_EBT_802_3 is not set
+# CONFIG_BRIDGE_EBT_AMONG is not set
+# CONFIG_BRIDGE_EBT_ARP is not set
+# CONFIG_BRIDGE_EBT_ARPREPLY is not set
+# CONFIG_BRIDGE_EBT_BROUTE is not set
+# CONFIG_BRIDGE_EBT_DNAT is not set
+# CONFIG_BRIDGE_EBT_IP is not set
+# CONFIG_BRIDGE_EBT_IP6 is not set
+# CONFIG_BRIDGE_EBT_LIMIT is not set
+# CONFIG_BRIDGE_EBT_LOG is not set
+# CONFIG_BRIDGE_EBT_MARK is not set
+# CONFIG_BRIDGE_EBT_MARK_T is not set
+# CONFIG_BRIDGE_EBT_NFLOG is not set
+# CONFIG_BRIDGE_EBT_PKTTYPE is not set
+# CONFIG_BRIDGE_EBT_REDIRECT is not set
+# CONFIG_BRIDGE_EBT_SNAT is not set
+# CONFIG_BRIDGE_EBT_STP is not set
+# CONFIG_BRIDGE_EBT_T_FILTER is not set
+# CONFIG_BRIDGE_EBT_T_NAT is not set
+# CONFIG_BRIDGE_EBT_ULOG is not set
+# CONFIG_BRIDGE_EBT_VLAN is not set
+# CONFIG_BRIDGE_IGMP_SNOOPING is not set
+# CONFIG_BRIDGE_NETFILTER is not set
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_BROADCOM_PHY is not set
+CONFIG_BROKEN_ON_SMP=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_BT is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_BT_ATH3K is not set
+# CONFIG_BT_BNEP is not set
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+# CONFIG_BT_CMTP is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIDTL1 is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIUART_3WIRE is not set
+# CONFIG_BT_HCIUART_ATH3K is not set
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_HIDP is not set
+CONFIG_BT_L2CAP=y
+# CONFIG_BT_MRVL is not set
+# CONFIG_BT_RFCOMM is not set
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_SCO=y
+CONFIG_BUG=y
+# CONFIG_C2PORT is not set
+# CONFIG_CAIF is not set
+# CONFIG_CAN is not set
+# CONFIG_CAPI_AVM is not set
+# CONFIG_CAPI_EICON is not set
+# CONFIG_CAPI_TRACE is not set
+CONFIG_CARDBUS=y
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_CARMA_FPGA is not set
+# CONFIG_CARMA_FPGA_PROGRAM is not set
+# CONFIG_CASSINI is not set
+CONFIG_CAVIUM_OCTEON_HELPER=y
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CB710_CORE is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_CED1401 is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CEPH_LIB is not set
+# CONFIG_CFG80211 is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_CHARGER_GPIO is not set
+# CONFIG_CHARGER_LP8727 is not set
+# CONFIG_CHARGER_MAX8903 is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_CHELSIO_T4 is not set
+# CONFIG_CHELSIO_T4VF is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_NFSD_EXPORT is not set
+CONFIG_CIFS_POSIX=y
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CLEANCACHE is not set
+CONFIG_CLS_U32_MARK=y
+CONFIG_CLS_U32_PERF=y
+# CONFIG_CMA is not set
+CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_EXTEND is not set
+# CONFIG_CMDLINE_FORCE is not set
+# CONFIG_CMDLINE_FROM_BOOTLOADER is not set
+# CONFIG_CNIC is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_COMEDI is not set
+# CONFIG_COMMON_CLK_DEBUG is not set
+# CONFIG_COMPACTION is not set
+# CONFIG_COMPAL_LAPTOP is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_CONSTRUCTORS=y
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_COPS is not set
+# CONFIG_CORDIC is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_COREDUMP is not set
+# CONFIG_CPA_DEBUG is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+# CONFIG_CRAMFS is not set
+CONFIG_CRASHLOG=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_CRC32_BIT is not set
+# CONFIG_CRC32_SARWATE is not set
+# CONFIG_CRC32_SELFTEST is not set
+# CONFIG_CRC32_SLICEBY4 is not set
+CONFIG_CRC32_SLICEBY8=y
+# CONFIG_CRC7 is not set
+# CONFIG_CRC8 is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CROSS_COMPILE=""
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_AEAD is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_AES_586 is not set
+# CONFIG_CRYPTO_AES_ARM is not set
+# CONFIG_CRYPTO_AES_NI_INTEL is not set
+# CONFIG_CRYPTO_ALGAPI is not set
+# CONFIG_CRYPTO_ALGAPI2 is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_BLKCIPHER is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CRC32C_INTEL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_DEV_FSL_CAAM is not set
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_MV_CESA is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
+# CONFIG_CRYPTO_HASH is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_PCOMP is not set
+# CONFIG_CRYPTO_PCOMP2 is not set
+# CONFIG_CRYPTO_PCRYPT is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_RNG is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SALSA20_586 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA1_ARM is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_TWOFISH_586 is not set
+# CONFIG_CRYPTO_TWOFISH_COMMON is not set
+# CONFIG_CRYPTO_USER is not set
+# CONFIG_CRYPTO_USER_API_HASH is not set
+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
+# CONFIG_CRYPTO_VMAC is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_XZ is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYSTALHD is not set
+# CONFIG_CS5535_MFGPT is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_CUSE is not set
+# CONFIG_CXT1E1 is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_DCB is not set
+# CONFIG_DDR is not set
+# CONFIG_DE600 is not set
+# CONFIG_DE620 is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_INFO_REDUCED=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_DEBUG_LOCKDEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_NX_TEST is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RODATA is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DECNET is not set
+CONFIG_DEFAULT_CUBIC=y
+CONFIG_DEFAULT_DEADLINE=y
+CONFIG_DEFAULT_HOSTNAME="(none)"
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_DEFAULT_NOOP is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_DEVPORT=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_DEVTMPFS is not set
+# CONFIG_DEVTMPFS_MOUNT is not set
+# CONFIG_DGRP is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DL2K is not set
+# CONFIG_DLM is not set
+# CONFIG_DM9000 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_DMADEVICES_DEBUG is not set
+# CONFIG_DMASCC is not set
+# CONFIG_DMATEST is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_DMA_ENGINE is not set
+# CONFIG_DMA_SHARED_BUFFER is not set
+# CONFIG_DM_DEBUG is not set
+# CONFIG_DM_DELAY is not set
+# CONFIG_DM_FLAKEY is not set
+# CONFIG_DM_LOG_USERSPACE is not set
+# CONFIG_DM_MULTIPATH is not set
+# CONFIG_DM_RAID is not set
+# CONFIG_DM_THIN_PROVISIONING is not set
+# CONFIG_DM_UEVENT is not set
+# CONFIG_DM_VERITY is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DNET is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_DNS_RESOLVER is not set
+CONFIG_DQL=y
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_DRM is not set
+# CONFIG_DS1682 is not set
+# CONFIG_DTLK is not set
+# CONFIG_DUMMY is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DW_WATCHDOG is not set
+# CONFIG_DX_SEP is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_E100 is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E2100 is not set
+# CONFIG_EASYCAP is not set
+# CONFIG_ECHO is not set
+# CONFIG_ECONET is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_EDAC is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_EEPROM_93XX46 is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_DIGSY_MTC_CFG is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEXPRESS is not set
+# CONFIG_EEXPRESS_PRO is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_EFS_FS is not set
+# CONFIG_ELF_CORE is not set
+CONFIG_EMBEDDED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ENCRYPTED_KEYS is not set
+# CONFIG_ENIC is not set
+# CONFIG_EPIC100 is not set
+CONFIG_EPOLL=y
+# CONFIG_EQUALIZER is not set
+# CONFIG_ET131X is not set
+# CONFIG_ETH16I is not set
+CONFIG_ETHERNET=y
+# CONFIG_ETHOC is not set
+CONFIG_EVENTFD=y
+# CONFIG_EVENT_POWER_TRACING_DEPRECATED is not set
+# CONFIG_EWRK3 is not set
+CONFIG_EXPERIMENTAL=y
+CONFIG_EXPERT=y
+# CONFIG_EXPORTFS is not set
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_DEBUG is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_USE_FOR_EXT23=y
+# CONFIG_EXTCON is not set
+CONFIG_EXTRA_FIRMWARE=""
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_EXYNOS_VIDEO is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_FANOTIFY is not set
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_FAT_FS is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_FB is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_ARC is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_ARMCLCD is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_AUO_K190X is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_GEODE is not set
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_I740 is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_LE80578 is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_N411 is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_PS3 is not set
+# CONFIG_FB_PXA is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_SM7XX is not set
+# CONFIG_FB_SMSCUFX is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_XGI is not set
+# CONFIG_FCOE is not set
+# CONFIG_FCOE_FNIC is not set
+# CONFIG_FDDI is not set
+# CONFIG_FEALNX is not set
+# CONFIG_FHANDLE is not set
+CONFIG_FIB_RULES=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_FIREWIRE is not set
+# CONFIG_FIREWIRE_NOSY is not set
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_FLATMEM=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_FORCEDETH is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_FRAME_POINTER is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_FREEZER is not set
+# CONFIG_FRONTSWAP is not set
+# CONFIG_FSCACHE is not set
+CONFIG_FSNOTIFY=y
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FT1000 is not set
+# CONFIG_FTGMAC100 is not set
+# CONFIG_FTL is not set
+# CONFIG_FTMAC100 is not set
+# CONFIG_FTRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_FUJITSU_TABLET is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_FUSE_FS is not set
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+# CONFIG_FUSION_SPI is not set
+CONFIG_FUTEX=y
+CONFIG_FW_LOADER=y
+CONFIG_GACT_PROB=y
+# CONFIG_GAMEPORT is not set
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_IRQ_PROBE=y
+# CONFIG_GENERIC_PWM is not set
+CONFIG_GENERIC_TIME=y
+# CONFIG_GFS2_FS is not set
+# CONFIG_GIGASET_CAPI is not set
+# CONFIG_GIGASET_DEBUG is not set
+# CONFIG_GPIOLIB is not set
+# CONFIG_GPIO_74X164 is not set
+# CONFIG_GPIO_ADNP is not set
+# CONFIG_GPIO_ADP5588 is not set
+# CONFIG_GPIO_AMD8111 is not set
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_CS5535 is not set
+# CONFIG_GPIO_EM is not set
+# CONFIG_GPIO_GENERIC_PLATFORM is not set
+# CONFIG_GPIO_IT8761E is not set
+# CONFIG_GPIO_LANGWELL is not set
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_ML_IOH is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_PCH is not set
+# CONFIG_GPIO_RDC321X is not set
+# CONFIG_GPIO_SCH is not set
+# CONFIG_GPIO_SX150X is not set
+# CONFIG_GPIO_SYSFS is not set
+# CONFIG_GPIO_VX855 is not set
+# CONFIG_GPIO_XILINX is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HAMACHI is not set
+CONFIG_HAMRADIO=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HCALL_STATS is not set
+# CONFIG_HDLC is not set
+# CONFIG_HDLC_CISCO is not set
+# CONFIG_HDLC_FR is not set
+# CONFIG_HDLC_PPP is not set
+# CONFIG_HDLC_RAW is not set
+# CONFIG_HDLC_RAW_ETH is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_HERMES is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HIBERNATION is not set
+# CONFIG_HID is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_ACRUX is not set
+# CONFIG_HID_ACRUX_FF is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_AUREAL is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_ELECOM is not set
+# CONFIG_HID_EMS_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_GENERIC is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_HOLTEK is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_KEYTOUCH is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_LCPOWER is not set
+# CONFIG_HID_LENOVO_TPKBD is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MAGICMOUSE is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_MULTITOUCH is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_PID is not set
+# CONFIG_HID_PRIMAX is not set
+# CONFIG_HID_PRODIKEYS is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_ROCCAT_ARVO is not set
+# CONFIG_HID_ROCCAT_KONE is not set
+# CONFIG_HID_ROCCAT_KONEPLUS is not set
+# CONFIG_HID_ROCCAT_KOVAPLUS is not set
+# CONFIG_HID_ROCCAT_PYRA is not set
+# CONFIG_HID_SAITEK is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SPEEDLINK is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_TIVO is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_UCLOGIC is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_WALTOP is not set
+# CONFIG_HID_WIIMOTE is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_HIGH_RES_TIMERS=y
+# CONFIG_HIPPI is not set
+# CONFIG_HMC6352 is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_HOSTAP_CS is not set
+# CONFIG_HOSTAP_PCI is not set
+# CONFIG_HOSTAP_PLX is not set
+CONFIG_HOTPLUG=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HP100 is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_HPLAN is not set
+# CONFIG_HPLAN_PLUS is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_HSI is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_HVC_DCC is not set
+# CONFIG_HVC_UDBG is not set
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWSPINLOCK_OMAP is not set
+CONFIG_HW_PERF_EVENTS=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HW_RANDOM_AMD is not set
+# CONFIG_HW_RANDOM_ATMEL is not set
+# CONFIG_HW_RANDOM_EXYNOS is not set
+# CONFIG_HW_RANDOM_GEODE is not set
+# CONFIG_HW_RANDOM_INTEL is not set
+# CONFIG_HW_RANDOM_PPC4XX is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_HW_RANDOM_VIA is not set
+# CONFIG_HYPERV is not set
+# CONFIG_HYSDN is not set
+CONFIG_HZ=100
+CONFIG_HZ_100=y
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_48 is not set
+# CONFIG_I2C is not set
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCA is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_CHARDEV is not set
+# CONFIG_I2C_COMPAT is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_DESIGNWARE_PCI is not set
+# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
+# CONFIG_I2C_DIOLAN_U2C is not set
+# CONFIG_I2C_EG20T is not set
+# CONFIG_I2C_ELEKTOR is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_HELPER_AUTO is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_IBM_IIC is not set
+# CONFIG_I2C_INTEL_MID is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_MUX is not set
+# CONFIG_I2C_MV64XXX is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_NOMADIK is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_PXA_PCI is not set
+# CONFIG_I2C_SCMI is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_SMBUS is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VERSATILE is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_XILINX is not set
+# CONFIG_I2O is not set
+# CONFIG_I6300ESB_WDT is not set
+# CONFIG_I82092 is not set
+# CONFIG_I82365 is not set
+# CONFIG_IBM_ASM is not set
+# CONFIG_IBM_EMAC_DEBUG is not set
+# CONFIG_IBM_EMAC_EMAC4 is not set
+# CONFIG_IBM_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_IBM_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_EMAC_RGMII is not set
+# CONFIG_IBM_EMAC_TAH is not set
+# CONFIG_IBM_EMAC_ZMII is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_IDE is not set
+# CONFIG_IDEAPAD_LAPTOP is not set
+# CONFIG_IDE_GD is not set
+# CONFIG_IDE_PHISON is not set
+# CONFIG_IDE_PROC_FS is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_IFB is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_IIO is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_IKCONFIG_PROC is not set
+# CONFIG_IMAGE_CMDLINE_HACK is not set
+CONFIG_INET=y
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_TCP_DIAG is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_UDP_DIAG is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_INFTL is not set
+# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
+# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
+CONFIG_INITRAMFS_COMPRESSION_NONE=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_INPUT is not set
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_APANEL is not set
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_ATLAS_BTNS is not set
+# CONFIG_INPUT_BMA150 is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_CMA3000 is not set
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_GP2A is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_GPIO_TILT_POLLED is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_KXTJ9 is not set
+# CONFIG_INPUT_MATRIXKMAP is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_MMA8450 is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_MPU3050 is not set
+# CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_PCSPKR is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_WISTRON_BTNS is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INTEL_IDLE is not set
+# CONFIG_INTEL_MID_PTI is not set
+# CONFIG_INTEL_OAKTRAIL is not set
+# CONFIG_INTERVAL_TREE_TEST is not set
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IP1000 is not set
+# CONFIG_IP17XX_PHY is not set
+# CONFIG_IP6_NF_FILTER is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP6_NF_MANGLE is not set
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
+# CONFIG_IP6_NF_MATCH_MH is not set
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_RPFILTER is not set
+# CONFIG_IP6_NF_MATCH_RT is not set
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_RAW is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+# CONFIG_IP6_NF_TARGET_LOG is not set
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+# CONFIG_IPACK_BUS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_IPV6 is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_ROUTE_INFO is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_SIT_6RD is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2200 is not set
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_IPW2200_MONITOR=y
+# CONFIG_IPW2200_PROMISCUOUS is not set
+# CONFIG_IPW2200_QOS is not set
+# CONFIG_IPW2200_RADIOTAP is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_IPX is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_FIB_TRIE_STATS is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_MULTIPLE_TABLES=y
+# CONFIG_IP_NF_ARPFILTER is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_NF_ARP_MANGLE is not set
+# CONFIG_IP_NF_FILTER is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_RPFILTER is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_SECURITY is not set
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_MASQUERADE is not set
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_IP_NF_TARGET_REJECT is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+# CONFIG_IP_PIMSM_V1 is not set
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_IP_PNP is not set
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_SCTP is not set
+# CONFIG_IP_SET is not set
+# CONFIG_IP_VS is not set
+# CONFIG_IRDA is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_IRQ_DOMAIN_DEBUG is not set
+# CONFIG_IR_IMON is not set
+# CONFIG_IR_JVC_DECODER is not set
+# CONFIG_IR_LIRC_CODEC is not set
+# CONFIG_IR_MCEUSB is not set
+# CONFIG_IR_NEC_DECODER is not set
+# CONFIG_IR_RC5_DECODER is not set
+# CONFIG_IR_RC5_SZ_DECODER is not set
+# CONFIG_IR_RC6_DECODER is not set
+# CONFIG_IR_SONY_DECODER is not set
+# CONFIG_IR_STREAMZAP is not set
+# CONFIG_ISCSI_BOOT_SYSFS is not set
+# CONFIG_ISCSI_TCP is not set
+CONFIG_ISDN=y
+# CONFIG_ISDN_AUDIO is not set
+# CONFIG_ISDN_CAPI is not set
+# CONFIG_ISDN_CAPI_CAPIDRV is not set
+# CONFIG_ISDN_DIVERSION is not set
+# CONFIG_ISDN_DRV_ACT2000 is not set
+# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set
+# CONFIG_ISDN_DRV_GIGASET is not set
+# CONFIG_ISDN_DRV_HISAX is not set
+# CONFIG_ISDN_DRV_ICN is not set
+# CONFIG_ISDN_DRV_LOOP is not set
+# CONFIG_ISDN_DRV_PCBIT is not set
+# CONFIG_ISDN_DRV_SC is not set
+# CONFIG_ISDN_I4L is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISL29020 is not set
+# CONFIG_ISO9660_FS is not set
+# CONFIG_ISS4xx is not set
+# CONFIG_IWL3945 is not set
+# CONFIG_IWLAGN is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWMC3200TOP is not set
+# CONFIG_IXGB is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGBEVF is not set
+# CONFIG_JBD is not set
+# CONFIG_JBD2_DEBUG is not set
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_POSIX_ACL is not set
+# CONFIG_JFFS2_FS_SECURITY is not set
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_LZMA=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_ZLIB is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_STATISTICS is not set
+# CONFIG_JME is not set
+CONFIG_JOLIET=y
+# CONFIG_JUMP_LABEL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_KERNEL_XZ=y
+# CONFIG_KEXEC is not set
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ADP5589 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_LM8333 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_MPR121 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OMAP4 is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_QT1070 is not set
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_SAMSUNG is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_TCA8418 is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYS is not set
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_KPROBES is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_KSM is not set
+# CONFIG_KSZ884X_PCI is not set
+# CONFIG_KVM_GUEST is not set
+# CONFIG_L2TP is not set
+# CONFIG_L2TP_ETH is not set
+# CONFIG_L2TP_IP is not set
+# CONFIG_L2TP_V3 is not set
+# CONFIG_LANMEDIA is not set
+# CONFIG_LANTIQ is not set
+# CONFIG_LAPB is not set
+# CONFIG_LASAT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_LBDAF=y
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_BLINKM is not set
+CONFIG_LEDS_CLASS=y
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_GPIO is not set
+CONFIG_LEDS_GPIO_OF=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_INTEL_SS4200 is not set
+# CONFIG_LEDS_LM3530 is not set
+# CONFIG_LEDS_LM3556 is not set
+# CONFIG_LEDS_LM355x is not set
+# CONFIG_LEDS_LM3642 is not set
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP5523 is not set
+# CONFIG_LEDS_LT3593 is not set
+# CONFIG_LEDS_NET5501 is not set
+# CONFIG_LEDS_OT200 is not set
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_PCA9633 is not set
+# CONFIG_LEDS_RENESAS_TPU is not set
+# CONFIG_LEDS_TCA6507 is not set
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_CPU is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+# CONFIG_LEDS_TRIGGER_MORSE is not set
+CONFIG_LEDS_TRIGGER_NETDEV=y
+# CONFIG_LEDS_TRIGGER_ONESHOT is not set
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
+# CONFIG_LEDS_TRIGGER_USBDEV is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_LIB80211_CRYPT_CCMP is not set
+# CONFIG_LIB80211_CRYPT_TKIP is not set
+# CONFIG_LIB80211_CRYPT_WEP is not set
+# CONFIG_LIB80211_DEBUG is not set
+# CONFIG_LIBCRC32C is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_LIBERTAS_USB is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_LIBIPW_DEBUG is not set
+# CONFIG_LINE6_USB is not set
+# CONFIG_LIRC_STAGING is not set
+# CONFIG_LKDTM is not set
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_LOCKD is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_LOCKD_V4=y
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_LOGFS is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGO is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_LOONGSON_MC146818 is not set
+# CONFIG_LP486E is not set
+# CONFIG_LPC_ICH is not set
+# CONFIG_LPC_SCH is not set
+# CONFIG_LP_CONSOLE is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_LTPC is not set
+# CONFIG_LXT_PHY is not set
+CONFIG_LZMA_COMPRESS=y
+CONFIG_LZMA_DECOMPRESS=y
+# CONFIG_M25PXX_PREFER_SMALL_SECTOR_ERASE is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_MACH_JZ4740 is not set
+# CONFIG_MACH_LOONGSON is not set
+# CONFIG_MACH_NO_WESTBRIDGE is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_MACVTAP is not set
+# CONFIG_MAC_EMUMOUSEBTN is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
+# CONFIG_MD is not set
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_MDIO_BUS_MUX_GPIO is not set
+# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
+# CONFIG_MD_FAULTY is not set
+# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
+# CONFIG_MEDIA_ATTACH is not set
+# CONFIG_MEDIA_CAMERA_SUPPORT is not set
+# CONFIG_MEDIA_CONTROLLER is not set
+# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
+# CONFIG_MEDIA_RADIO_SUPPORT is not set
+# CONFIG_MEDIA_RC_SUPPORT is not set
+# CONFIG_MEDIA_SUPPORT is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_MEMORY is not set
+# CONFIG_MEMORY_FAILURE is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_MFD_88PM800 is not set
+# CONFIG_MFD_88PM805 is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_AAT2870_CORE is not set
+# CONFIG_MFD_ARIZONA_I2C is not set
+# CONFIG_MFD_ARIZONA_SPI is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_CS5535 is not set
+# CONFIG_MFD_DA9052_I2C is not set
+# CONFIG_MFD_DA9052_SPI is not set
+# CONFIG_MFD_DA9055 is not set
+# CONFIG_MFD_JANZ_CMODIO is not set
+# CONFIG_MFD_LM3533 is not set
+# CONFIG_MFD_LP8788 is not set
+# CONFIG_MFD_MAX77686 is not set
+# CONFIG_MFD_MAX77693 is not set
+# CONFIG_MFD_MAX8907 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8997 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_MFD_MC13XXX_I2C is not set
+# CONFIG_MFD_MC13XXX_SPI is not set
+# CONFIG_MFD_PALMAS is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_RC5T583 is not set
+# CONFIG_MFD_RDC321X is not set
+# CONFIG_MFD_S5M_CORE is not set
+# CONFIG_MFD_SEC_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SMSC is not set
+# CONFIG_MFD_STMPE is not set
+CONFIG_MFD_SUPPORT=y
+# CONFIG_MFD_SYSCON is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC3589X is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TPS65090 is not set
+# CONFIG_MFD_TPS65217 is not set
+# CONFIG_MFD_TPS6586X is not set
+# CONFIG_MFD_TPS65910 is not set
+# CONFIG_MFD_TPS65912_I2C is not set
+# CONFIG_MFD_TPS65912_SPI is not set
+# CONFIG_MFD_VX855 is not set
+# CONFIG_MFD_WL1273_CORE is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MICREL_KS8995MA is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_MIGRATION is not set
+CONFIG_MII=y
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_MIPS_ALCHEMY is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MIPS_FPU_EMU is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SIM is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_MISDN is not set
+# CONFIG_MISDN_AVMFRITZ is not set
+# CONFIG_MISDN_HFCPCI is not set
+# CONFIG_MISDN_HFCUSB is not set
+# CONFIG_MISDN_INFINEON is not set
+# CONFIG_MISDN_NETJET is not set
+# CONFIG_MISDN_SPEEDFAX is not set
+# CONFIG_MISDN_W6692 is not set
+# CONFIG_MKISS is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_MLX4_EN is not set
+# CONFIG_MMC is not set
+# CONFIG_MMC_ARMMMCI is not set
+# CONFIG_MMC_BLOCK is not set
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_MMC_BLOCK_MINORS=8
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_CLKGATE is not set
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_DW is not set
+# CONFIG_MMC_MVSDIO is not set
+# CONFIG_MMC_S3C is not set
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SDHCI_PXAV2 is not set
+# CONFIG_MMC_SDHCI_PXAV3 is not set
+# CONFIG_MMC_SDRICOH_CS is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_TEST is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MMC_VIA_SDMMC is not set
+# CONFIG_MMC_VUB300 is not set
+CONFIG_MMU=y
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODULE_SIG is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_MSDOS_FS is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_MSI_LAPTOP is not set
+CONFIG_MTD=y
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_AR7_PARTS is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_MTD_BLOCK2MTD is not set
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_DOCG3 is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_GPIO_ADDR is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_JEDECPROBE is not set
+# CONFIG_MTD_LATCH_ADDR is not set
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_M25P80 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_MYLOADER_PARTS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_NAND_AMS_DELTA is not set
+# CONFIG_MTD_NAND_AR934X is not set
+# CONFIG_MTD_NAND_ATMEL is not set
+# CONFIG_MTD_NAND_AU1550 is not set
+# CONFIG_MTD_NAND_AUTCPU12 is not set
+# CONFIG_MTD_NAND_BCH is not set
+# CONFIG_MTD_NAND_BCM_UMI is not set
+# CONFIG_MTD_NAND_BF5XX is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_CM_X270 is not set
+# CONFIG_MTD_NAND_CS553X is not set
+# CONFIG_MTD_NAND_DAVINCI is not set
+# CONFIG_MTD_NAND_DENALI is not set
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xff108018
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_DOCG4 is not set
+# CONFIG_MTD_NAND_ECC is not set
+# CONFIG_MTD_NAND_ECC_BCH is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
+# CONFIG_MTD_NAND_FSL_UPM is not set
+# CONFIG_MTD_NAND_FSMC is not set
+# CONFIG_MTD_NAND_GPIO is not set
+# CONFIG_MTD_NAND_GPMI_NAND is not set
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_JZ4740 is not set
+# CONFIG_MTD_NAND_MPC5121_NFC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_MXC is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_NDFC is not set
+# CONFIG_MTD_NAND_NOMADIK is not set
+# CONFIG_MTD_NAND_NUC900 is not set
+# CONFIG_MTD_NAND_OMAP2 is not set
+# CONFIG_MTD_NAND_ORION is not set
+# CONFIG_MTD_NAND_PASEMI is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_PPCHAMELEONEVB is not set
+# CONFIG_MTD_NAND_PXA3xx is not set
+# CONFIG_MTD_NAND_RB4XX is not set
+# CONFIG_MTD_NAND_RB750 is not set
+# CONFIG_MTD_NAND_RICOH is not set
+# CONFIG_MTD_NAND_RTC_FROM4 is not set
+# CONFIG_MTD_NAND_S3C2410 is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+# CONFIG_MTD_NAND_SH_FLCTL is not set
+# CONFIG_MTD_NAND_SOCRATES is not set
+# CONFIG_MTD_NAND_SPIA is not set
+# CONFIG_MTD_NAND_TMIO is not set
+# CONFIG_MTD_NAND_TXX9NDFMC is not set
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_OOPS is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PCMCIA is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_ROM is not set
+CONFIG_MTD_ROOTFS_ROOT_DEV=y
+CONFIG_MTD_ROOTFS_SPLIT=y
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SWAP is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_UBI is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_MVSWITCH_PHY is not set
+# CONFIG_MWAVE is not set
+# CONFIG_MWL8K is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_NE2000 is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_NEC_MARKEINS is not set
+CONFIG_NET=y
+# CONFIG_NETCONSOLE is not set
+CONFIG_NETDEVICES=y
+CONFIG_NETDEV_1000=y
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_NETFILTER_ADVANCED is not set
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_NETLINK_ACCT is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE_CT is not set
+# CONFIG_NETFILTER_TPROXY is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_NETFILTER_XT_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_CPU is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ECN is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LAYER7 is not set
+# CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
+# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
+# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+# CONFIG_NETFILTER_XT_TARGET_LOG is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_TARGET_TEE is not set
+# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NETROM is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NET_9P is not set
+# CONFIG_NET_ACT_CSUM is not set
+# CONFIG_NET_ACT_GACT is not set
+# CONFIG_NET_ACT_IPT is not set
+# CONFIG_NET_ACT_MIRRED is not set
+# CONFIG_NET_ACT_NAT is not set
+# CONFIG_NET_ACT_PEDIT is not set
+# CONFIG_NET_ACT_POLICE is not set
+# CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
+CONFIG_NET_CADENCE=y
+# CONFIG_NET_CALXEDA_XGMAC is not set
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_ACT is not set
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_CLS_FW is not set
+CONFIG_NET_CLS_IND=y
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_U32 is not set
+CONFIG_NET_CORE=y
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_NET_DSA_MV88E6123_61_65 is not set
+# CONFIG_NET_DSA_MV88E6131 is not set
+# CONFIG_NET_DSA_MV88E6XXX is not set
+# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
+# CONFIG_NET_DSA_TAG_DSA is not set
+# CONFIG_NET_DSA_TAG_EDSA is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_EMATCH_CMP is not set
+# CONFIG_NET_EMATCH_META is not set
+# CONFIG_NET_EMATCH_NBYTE is not set
+CONFIG_NET_EMATCH_STACK=32
+# CONFIG_NET_EMATCH_TEXT is not set
+# CONFIG_NET_EMATCH_U32 is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_NET_FC is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_NET_IPGRE_BROADCAST=y
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPVTI is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_NET_KEY is not set
+# CONFIG_NET_KEY_MIGRATE is not set
+# CONFIG_NET_PACKET_ENGINE is not set
+CONFIG_NET_PCI=y
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_POCKET is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_NET_SB1000 is not set
+CONFIG_NET_SCHED=y
+# CONFIG_NET_SCH_ATM is not set
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_CHOKE is not set
+# CONFIG_NET_SCH_CODEL is not set
+# CONFIG_NET_SCH_DRR is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_ESFQ is not set
+CONFIG_NET_SCH_ESFQ_NFCT=y
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_NET_SCH_FQ_CODEL is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_INGRESS is not set
+# CONFIG_NET_SCH_MQPRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_PLUG is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_QFQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFB is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_TEAM is not set
+# CONFIG_NET_TULIP is not set
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_NET_VENDOR_8390=y
+CONFIG_NET_VENDOR_ADAPTEC=y
+CONFIG_NET_VENDOR_ALTEON=y
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_NET_VENDOR_ATHEROS=y
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_NET_VENDOR_BROCADE=y
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_NET_VENDOR_CIRRUS=y
+CONFIG_NET_VENDOR_CISCO=y
+CONFIG_NET_VENDOR_DEC=y
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_NET_VENDOR_EMULEX=y
+CONFIG_NET_VENDOR_EXAR=y
+CONFIG_NET_VENDOR_FARADAY=y
+CONFIG_NET_VENDOR_FREESCALE=y
+CONFIG_NET_VENDOR_FUJITSU=y
+CONFIG_NET_VENDOR_HP=y
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_NET_VENDOR_IBM=y
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_NET_VENDOR_MELLANOX=y
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_NET_VENDOR_MICROCHIP=y
+CONFIG_NET_VENDOR_MYRI=y
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NET_VENDOR_NVIDIA=y
+CONFIG_NET_VENDOR_OKI=y
+CONFIG_NET_VENDOR_QLOGIC=y
+CONFIG_NET_VENDOR_RDC=y
+CONFIG_NET_VENDOR_REALTEK=y
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_NET_VENDOR_SILAN=y
+CONFIG_NET_VENDOR_SILICOM=y
+CONFIG_NET_VENDOR_SIS=y
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_NET_VENDOR_SUN=y
+CONFIG_NET_VENDOR_TEHUTI=y
+CONFIG_NET_VENDOR_TI=y
+CONFIG_NET_VENDOR_TOSHIBA=y
+CONFIG_NET_VENDOR_VIA=y
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_NET_VENDOR_XILINX=y
+CONFIG_NET_VENDOR_XIRCOM=y
+CONFIG_NEW_LEDS=y
+# CONFIG_NFC is not set
+# CONFIG_NFC_DEVICES is not set
+# CONFIG_NFSD is not set
+# CONFIG_NFSD_DEPRECATED is not set
+# CONFIG_NFSD_V2_ACL is not set
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+# CONFIG_NFS_ACL_SUPPORT is not set
+CONFIG_NFS_COMMON=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFS_SWAP is not set
+# CONFIG_NFS_V2 is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFTL is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_FTP is not set
+# CONFIG_NF_CONNTRACK_H323 is not set
+# CONFIG_NF_CONNTRACK_IPV4 is not set
+# CONFIG_NF_CONNTRACK_IPV6 is not set
+# CONFIG_NF_CONNTRACK_IRC is not set
+# CONFIG_NF_CONNTRACK_MARK is not set
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+CONFIG_NF_CONNTRACK_PROCFS=y
+# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
+# CONFIG_NF_CONNTRACK_RTSP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+# CONFIG_NF_CONNTRACK_SNMP is not set
+# CONFIG_NF_CONNTRACK_TFTP is not set
+# CONFIG_NF_CONNTRACK_TIMEOUT is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+# CONFIG_NF_CONNTRACK_ZONES is not set
+# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_GRE is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_NF_NAT is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_FTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_IRC is not set
+CONFIG_NF_NAT_IPV4=m
+# CONFIG_NF_NAT_NEEDED is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_PROTO_GRE is not set
+# CONFIG_NF_NAT_RTSP is not set
+# CONFIG_NF_NAT_SIP is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NI52 is not set
+# CONFIG_NI65 is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NIU is not set
+CONFIG_NLATTR=y
+# CONFIG_NLM_XLP_BOARD is not set
+# CONFIG_NLM_XLR_BOARD is not set
+# CONFIG_NLS is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_MAC_CELTIC is not set
+# CONFIG_NLS_MAC_CENTEURO is not set
+# CONFIG_NLS_MAC_CROATIAN is not set
+# CONFIG_NLS_MAC_CYRILLIC is not set
+# CONFIG_NLS_MAC_GAELIC is not set
+# CONFIG_NLS_MAC_GREEK is not set
+# CONFIG_NLS_MAC_ICELAND is not set
+# CONFIG_NLS_MAC_INUIT is not set
+# CONFIG_NLS_MAC_ROMAN is not set
+# CONFIG_NLS_MAC_ROMANIAN is not set
+# CONFIG_NLS_MAC_TURKISH is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_NORTEL_HERMES is not set
+# CONFIG_NOTIFIER_ERROR_INJECTION is not set
+# CONFIG_NOZOMI is not set
+# CONFIG_NO_BOOTMEM is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_NO_IOPORT is not set
+# CONFIG_NS83820 is not set
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_FS is not set
+# CONFIG_NTFS_RW is not set
+# CONFIG_NVRAM is not set
+# CONFIG_NV_TCO is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_N_GSM is not set
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_OBS600 is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_OCF_BENCH is not set
+# CONFIG_OCF_C7108 is not set
+# CONFIG_OCF_CRYPTOCTEON is not set
+# CONFIG_OCF_EP80579 is not set
+# CONFIG_OCF_HIFN is not set
+# CONFIG_OCF_HIFNHIPP is not set
+# CONFIG_OCF_IXP4XX is not set
+# CONFIG_OCF_KIRKWOOD is not set
+# CONFIG_OCF_OCF is not set
+# CONFIG_OCF_OCFNULL is not set
+# CONFIG_OCF_SAFE is not set
+# CONFIG_OCF_TALITOS is not set
+# CONFIG_OCF_UBSEC_SSB is not set
+# CONFIG_OC_ETM is not set
+# CONFIG_OF_SELFTEST is not set
+# CONFIG_OMAP_OCP2SCP is not set
+# CONFIG_OMAP_USB2 is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_OPENVSWITCH is not set
+# CONFIG_ORION_WATCHDOG is not set
+# CONFIG_OSF_PARTITION is not set
+CONFIG_OVERLAYFS_FS=y
+# CONFIG_P54_COMMON is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_DIAG is not set
+# CONFIG_PAGE_POISONING is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PANEL is not set
+# CONFIG_PANIC_ON_OOPS is not set
+# CONFIG_PANTHERLORD_FF is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PARPORT_1284 is not set
+# CONFIG_PARPORT_AX88796 is not set
+# CONFIG_PARPORT_PC is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARASAN_CF is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_ATP867X is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CS5535 is not set
+# CONFIG_PATA_CS5536 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_ISAPNP is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_QDI is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_WINBOND_VLB is not set
+# CONFIG_PC300TOO is not set
+# CONFIG_PCCARD is not set
+# CONFIG_PCH_GBE is not set
+# CONFIG_PCH_PHUB is not set
+# CONFIG_PCI200SYN is not set
+# CONFIG_PCIEAER_INJECT is not set
+# CONFIG_PCIEASPM is not set
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_PCI_ATMEL is not set
+# CONFIG_PCI_CNB20LE_QUIRK is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_DISABLE_COMMON_QUIRKS is not set
+# CONFIG_PCI_HERMES is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCI_PASID is not set
+# CONFIG_PCI_PRI is not set
+CONFIG_PCI_QUIRKS=y
+# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
+# CONFIG_PCI_STUB is not set
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCMCIA is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_ATMEL is not set
+# CONFIG_PCMCIA_AXNET is not set
+# CONFIG_PCMCIA_DEBUG is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+# CONFIG_PCMCIA_HERMES is not set
+# CONFIG_PCMCIA_LOAD_CIS is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_PCNET is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_SPECTRUM is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_XIRCOM is not set
+# CONFIG_PCNET32 is not set
+# CONFIG_PCSPKR_PLATFORM is not set
+# CONFIG_PD6729 is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PHANTOM is not set
+# CONFIG_PHONE is not set
+# CONFIG_PHONET is not set
+# CONFIG_PHYLIB is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+# CONFIG_PID_IN_CONTEXTIDR is not set
+# CONFIG_PID_NS is not set
+# CONFIG_PINCTRL is not set
+# CONFIG_PLAT_SPEAR is not set
+# CONFIG_PLIP is not set
+# CONFIG_PLX_HERMES is not set
+# CONFIG_PM is not set
+# CONFIG_PMBUS is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PM_DEVFREQ is not set
+# CONFIG_PM_RUNTIME is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_POHMELFS is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_POWERTV is not set
+# CONFIG_POWER_AVS is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PPC4xx_GPIO is not set
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+# CONFIG_PPC_EMULATED_STATS is not set
+# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
+# CONFIG_PPP is not set
+# CONFIG_PPPOATM is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_DEFLATE is not set
+CONFIG_PPP_FILTER=y
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPS is not set
+# CONFIG_PPTP is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_PRINTK=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_PRISM2_USB is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_PROBE_INITRD_HEADER is not set
+# CONFIG_PROC_DEVICETREE is not set
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILING is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_PROVE_RCU is not set
+# CONFIG_PSB6970_PHY is not set
+# CONFIG_PSTORE is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_QLCNIC is not set
+# CONFIG_QLGE is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QNX6FS_FS is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+# CONFIG_QUOTA_DEBUG is not set
+# CONFIG_R3964 is not set
+# CONFIG_R6040 is not set
+# CONFIG_R8169 is not set
+# CONFIG_R8187SE is not set
+# CONFIG_R8712U is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_RAMOOPS is not set
+# CONFIG_RAPIDIO is not set
+# CONFIG_RAR_REGISTER is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_RBTREE_TEST is not set
+# CONFIG_RCU_CPU_STALL_INFO is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+CONFIG_RCU_FANOUT_LEAF=16
+# CONFIG_RCU_FAST_NO_HZ is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_RC_CORE is not set
+# CONFIG_RC_MAP is not set
+# CONFIG_RDS is not set
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_GZIP is not set
+CONFIG_RD_LZMA=y
+# CONFIG_RD_LZO is not set
+# CONFIG_RD_XZ is not set
+# CONFIG_READABLE_ASM is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_GPIO is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_RELAY is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_RFKILL is not set
+# CONFIG_RFKILL_INPUT is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_ROSE is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_RTC_DEBUG is not set
+# CONFIG_RTC_DRV_AU1XXX is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_DS2404 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_EM3027 is not set
+# CONFIG_RTC_DRV_EP93XX is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_GENERIC is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_M41T93 is not set
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_MPC5121 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_PL030 is not set
+# CONFIG_RTC_DRV_PL031 is not set
+# CONFIG_RTC_DRV_PS3 is not set
+# CONFIG_RTC_DRV_PT7C4338 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_RTC7301 is not set
+# CONFIG_RTC_DRV_RV3029C2 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_SNVS is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_RTL8192E is not set
+# CONFIG_RTL8192U is not set
+# CONFIG_RTL8306_PHY is not set
+# CONFIG_RTL8366RB_PHY is not set
+# CONFIG_RTL8366S_PHY is not set
+# CONFIG_RTL8366_SMI is not set
+# CONFIG_RTL8366_SMI_DEBUG_FS is not set
+# CONFIG_RTL8367B_PHY is not set
+# CONFIG_RTL8367_PHY is not set
+# CONFIG_RTLLIB is not set
+# CONFIG_RTS5139 is not set
+# CONFIG_RTS_PSTOR is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_RUNTIME_DEBUG is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_S2IO is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SAMSUNG_LAPTOP is not set
+# CONFIG_SATA_ACARD_AHCI is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_AHCI_PLATFORM is not set
+# CONFIG_SATA_DWC is not set
+# CONFIG_SATA_FSL is not set
+# CONFIG_SATA_HIGHBANK is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SBC_FITPC2_WATCHDOG is not set
+# CONFIG_SBE_2T3E3 is not set
+# CONFIG_SBYPASS is not set
+# CONFIG_SC92031 is not set
+# CONFIG_SCC is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHED_MC is not set
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_SCHED_SMT is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_SCSI_BFA_FC is not set
+# CONFIG_SCSI_BNX2X_FCOE is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_CXGB4_ISCSI is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_HPSA is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_ISCI is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_LPFC is not set
+CONFIG_SCSI_MOD=y
+# CONFIG_SCSI_MPT2SAS is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_MVUMI is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PM8001 is not set
+# CONFIG_SCSI_PMCRAID is not set
+CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_UFSHCD is not set
+# CONFIG_SCSI_ULTRASTOR is not set
+CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SDIO_UART is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SEEQ8005 is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_ACPI_POWER is not set
+# CONFIG_SENSORS_AD7314 is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADS1015 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADS7871 is not set
+# CONFIG_SENSORS_ADT7410 is not set
+# CONFIG_SENSORS_ADT7411 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_APDS990X is not set
+# CONFIG_SENSORS_APPLESMC is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ASC7621 is not set
+# CONFIG_SENSORS_ATK0110 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_BH1770 is not set
+# CONFIG_SENSORS_BH1780 is not set
+# CONFIG_SENSORS_CORETEMP is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_DS620 is not set
+# CONFIG_SENSORS_EMC1403 is not set
+# CONFIG_SENSORS_EMC2103 is not set
+# CONFIG_SENSORS_EMC6W201 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_FAM15H_POWER is not set
+# CONFIG_SENSORS_FSCHMD is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_GPIO_FAN is not set
+# CONFIG_SENSORS_GSC is not set
+# CONFIG_SENSORS_HDAPS is not set
+# CONFIG_SENSORS_HIH6130 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_INA2XX is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_JC42 is not set
+# CONFIG_SENSORS_K10TEMP is not set
+# CONFIG_SENSORS_K8TEMP is not set
+# CONFIG_SENSORS_LINEAGE is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_LM95245 is not set
+# CONFIG_SENSORS_LTC4151 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LTC4261 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX16065 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX1668 is not set
+# CONFIG_SENSORS_MAX197 is not set
+# CONFIG_SENSORS_MAX6639 is not set
+# CONFIG_SENSORS_MAX6642 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_MCP3021 is not set
+# CONFIG_SENSORS_NTC_THERMISTOR is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SCH5627 is not set
+# CONFIG_SENSORS_SCH5636 is not set
+# CONFIG_SENSORS_SCH56XX_COMMON is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SHT21 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMM665 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP102 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VIA_CPUTEMP is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83795 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_ACCENT is not set
+# CONFIG_SERIAL_8250_BOCA is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+# CONFIG_SERIAL_8250_DW is not set
+# CONFIG_SERIAL_8250_EM is not set
+# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
+# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250_FOURPORT is not set
+# CONFIG_SERIAL_8250_HUB6 is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+# CONFIG_SERIAL_MFD_HSU is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_PCH_UART is not set
+# CONFIG_SERIAL_SCCNXP is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_UARTLITE is not set
+# CONFIG_SERIAL_XILINX_PS_UART is not set
+# CONFIG_SERIO is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SERIO_AMBAKMI is not set
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_PS2MULT is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SFC is not set
+# CONFIG_SFI is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SGI_PARTITION is not set
+CONFIG_SHMEM=y
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIGMA is not set
+CONFIG_SIGNALFD=y
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_SLAB=y
+CONFIG_SLABINFO=y
+# CONFIG_SLHC is not set
+# CONFIG_SLICOSS is not set
+# CONFIG_SLIP is not set
+# CONFIG_SLOB is not set
+# CONFIG_SLUB is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_SMARTJOYPLUS_FF is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMC9194 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_SMP is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_SMSC9420 is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_SND is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+# CONFIG_SND_AD1816A is not set
+# CONFIG_SND_AD1848 is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ADLIB is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ALOOP is not set
+# CONFIG_SND_ALS100 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_ASIHPI is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_ATMEL_AC97C is not set
+# CONFIG_SND_ATMEL_SOC is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT2320 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMI8330 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_CS4231 is not set
+# CONFIG_SND_CS4236 is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
+# CONFIG_SND_CTXFI is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_DESIGNWARE_I2S is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1688 is not set
+# CONFIG_SND_ES18XX is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FIREWIRE is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_GUSCLASSIC is not set
+# CONFIG_SND_GUSEXTREME is not set
+# CONFIG_SND_GUSMAX is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_HWDEP is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_INTERWAVE is not set
+# CONFIG_SND_INTERWAVE_STB is not set
+# CONFIG_SND_ISA is not set
+# CONFIG_SND_KIRKWOOD_SOC is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_LOLA is not set
+# CONFIG_SND_LX6464ES is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_MIPS is not set
+# CONFIG_SND_MIRO is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MPC52xx_SOC_EFIKA is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_MTS64 is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_OPL3SA2 is not set
+# CONFIG_SND_OPTI92X_AD1848 is not set
+# CONFIG_SND_OPTI92X_CS4231 is not set
+# CONFIG_SND_OPTI93X is not set
+CONFIG_SND_OSSEMUL=y
+# CONFIG_SND_OXYGEN is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_PCM is not set
+# CONFIG_SND_PCMCIA is not set
+# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_PDAUDIOCF is not set
+# CONFIG_SND_PORTMAN2X4 is not set
+# CONFIG_SND_PPC is not set
+# CONFIG_SND_RAWMIDI is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_RTCTIMER is not set
+# CONFIG_SND_SB16 is not set
+# CONFIG_SND_SB8 is not set
+# CONFIG_SND_SBAWE is not set
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_SIMPLE_CARD is not set
+# CONFIG_SND_SIS7019 is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SND_SOC_CACHE_LZO is not set
+# CONFIG_SND_SOC_MPC5200_AC97 is not set
+# CONFIG_SND_SOC_MPC5200_I2S is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_SSCAPE is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_TIMER is not set
+# CONFIG_SND_TRIDENT is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_6FIRE is not set
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_UA101 is not set
+# CONFIG_SND_USB_US122L is not set
+# CONFIG_SND_USB_USX2Y is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_WAVEFRONT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_SOLO6X10 is not set
+# CONFIG_SONYPI is not set
+# CONFIG_SONY_LAPTOP is not set
+# CONFIG_SOUND is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_SP5100_TCO is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_SPARSE_IRQ is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_SPEAKUP is not set
+# CONFIG_SPI is not set
+# CONFIG_SPINLOCK_TEST is not set
+# CONFIG_SPI_ALTERA is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_BUTTERFLY is not set
+# CONFIG_SPI_DEBUG is not set
+# CONFIG_SPI_DESIGNWARE is not set
+# CONFIG_SPI_FSL_ESPI is not set
+# CONFIG_SPI_FSL_SPI is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_GPIO_OLD is not set
+# CONFIG_SPI_LM70_LLP is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_SPI_MPC52xx is not set
+# CONFIG_SPI_MPC52xx_PSC is not set
+# CONFIG_SPI_OC_TINY is not set
+# CONFIG_SPI_ORION is not set
+# CONFIG_SPI_PL022 is not set
+# CONFIG_SPI_PPC4xx is not set
+# CONFIG_SPI_PXA2XX is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_RAMIPS is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_SPI_TOPCLIFF_PCH is not set
+# CONFIG_SPI_XCOMM is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_XWAY is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_SQUASHFS_LZO is not set
+# CONFIG_SQUASHFS_XATTR is not set
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_ZLIB is not set
+# CONFIG_SSB is not set
+# CONFIG_SSB_DEBUG is not set
+# CONFIG_SSB_PCMCIAHOST is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB_SDIOHOST is not set
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSFDC is not set
+CONFIG_STACKTRACE_SUPPORT=y
+# CONFIG_STACK_TRACER is not set
+CONFIG_STAGING=y
+# CONFIG_STAGING_MEDIA is not set
+CONFIG_STANDALONE=y
+CONFIG_STDBINUTILS=y
+# CONFIG_STE_MODEM_RPROC is not set
+# CONFIG_STE10XP is not set
+# CONFIG_STMMAC_ETH is not set
+CONFIG_STP=y
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_STUB_POULSBO is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_SUNRPC is not set
+# CONFIG_SUNRPC_DEBUG is not set
+# CONFIG_SUNRPC_GSS is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_SUSPEND is not set
+CONFIG_SWAP=y
+# CONFIG_SWCONFIG is not set
+# CONFIG_SWCONFIG_LEDS is not set
+# CONFIG_SYNCLINK_CS is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_SYSCTL=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_SYSFS=y
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_TARGET_CORE is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_TC35815 is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_TCIC is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+CONFIG_TCP_CONG_CUBIC=y
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_VENO is not set
+# CONFIG_TCP_CONG_WESTWOOD is not set
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_TEST_POWER is not set
+CONFIG_TEXTSEARCH=y
+# CONFIG_TEXTSEARCH_BM is not set
+# CONFIG_TEXTSEARCH_FSM is not set
+# CONFIG_TEXTSEARCH_KMP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_TIFM_CORE is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_TIMB_DMA is not set
+CONFIG_TIMERFD=y
+# CONFIG_TIMER_STATS is not set
+CONFIG_TINY_RCU=y
+# CONFIG_TIPC is not set
+# CONFIG_TI_DAC7512 is not set
+# CONFIG_TI_ST is not set
+# CONFIG_TLAN is not set
+# CONFIG_TMD_HERMES is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_TMPFS_XATTR=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
+# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
+# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
+# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ILI210X is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MMS114 is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_S3C2410 is not set
+# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TPS6507X is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_WM97XX is not set
+# CONFIG_TPS6105X is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+# CONFIG_TR is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_TRACE_SINK is not set
+CONFIG_TRACING_SUPPORT=y
+CONFIG_TRAD_SIGNALS=y
+# CONFIG_TRANZPORT is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_TTY_PRINTK is not set
+# CONFIG_TUN is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_TWL6040_CORE is not set
+# CONFIG_TYPHOON is not set
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_UDF_FS is not set
+CONFIG_UDF_NLS=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_UFS_FS is not set
+# CONFIG_UHID is not set
+CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
+# CONFIG_UIO is not set
+# CONFIG_ULTRA is not set
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_UNIX=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_UNIX_DIAG is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_USB is not set
+# CONFIG_USBIP_CORE is not set
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_ADUTUX is not set
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_ATM is not set
+CONFIG_USB_BELKIN=y
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_CHIPIDEA is not set
+# CONFIG_USB_CXACRU is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_DUMMY_HCD is not set
+# CONFIG_USB_DWC3 is not set
+# CONFIG_USB_DWC_OTG_LPM is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
+# CONFIG_USB_EHCI_MV is not set
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_ENESTORAGE is not set
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_ET61X251 is not set
+CONFIG_USB_EZUSB=y
+# CONFIG_USB_EZUSB_FX2 is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_FUNCTIONFS is not set
+# CONFIG_USB_FUSB300 is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
+CONFIG_USB_GADGET_VBUS_DRAW=2
+# CONFIG_USB_GL860 is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_GSPCA is not set
+# CONFIG_USB_GSPCA_BENQ is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_CPIA1 is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_JEILINJ is not set
+# CONFIG_USB_GSPCA_JL2005BCD is not set
+# CONFIG_USB_GSPCA_KINECT is not set
+# CONFIG_USB_GSPCA_KONICA is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_NW80X is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_OV534_9 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7302 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SE401 is not set
+# CONFIG_USB_GSPCA_SN9C2028 is not set
+# CONFIG_USB_GSPCA_SN9C20X is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA1528 is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_SQ930X is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_STV0680 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TOPRO is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_VICAM is not set
+# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_USB_G_ACM_MS is not set
+# CONFIG_USB_G_DBGP is not set
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_MULTI is not set
+# CONFIG_USB_G_NCM is not set
+# CONFIG_USB_G_NOKIA is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_G_WEBCAM is not set
+# CONFIG_USB_HID is not set
+# CONFIG_USB_HIDDEV is not set
+# CONFIG_USB_HSO is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_USB_IP_COMMON is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1301 is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_KC2190 is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LIBUSUAL is not set
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_M66592 is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_MV_UDC is not set
+# CONFIG_USB_NET2272 is not set
+# CONFIG_USB_NET_AX8817X is not set
+# CONFIG_USB_NET_CDCETHER is not set
+# CONFIG_USB_NET_CDC_EEM is not set
+# CONFIG_USB_NET_CDC_NCM is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_CX82310_ETH is not set
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_USB_NET_KALMIA is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_QMI_WWAN is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_USB_NET_SMSC75XX is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_OHCI_HCD_PCI is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+# CONFIG_USB_OHCI_HCD_PPC_SOC is not set
+# CONFIG_USB_OHCI_HCD_SSB is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_PWC_INPUT_EVDEV is not set
+# CONFIG_USB_R8A66597 is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_RENESAS_USBHS is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SERIAL is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_F81232 is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_METRO is not set
+# CONFIG_USB_SERIAL_MOS7715_PARPORT is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_QCAUX is not set
+# CONFIG_USB_SERIAL_QT2 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_QUATECH2 is not set
+# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_SSU100 is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_ZIO is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_SIERRA_NET is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_SPEEDTOUCH is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_REALTEK is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_SWITCH_FSA9480 is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_TMC is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_UAS is not set
+# CONFIG_USB_UEAGLEATM is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_USS720 is not set
+# CONFIG_USB_VIDEO_CLASS is not set
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+# CONFIG_USB_VL600 is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_WPAN_HCD is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+# CONFIG_USB_XHCI_HCD is not set
+# CONFIG_USB_XUSBATM is not set
+# CONFIG_USB_YUREX is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_USE_OF is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_UWB is not set
+# CONFIG_V4L_MEM2MEM_DRIVERS is not set
+# CONFIG_VETH is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VGA_ARB is not set
+# CONFIG_VGA_SWITCHEROO is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_AK881X is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT848 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_BWQCAM is not set
+# CONFIG_VIDEO_CAFE_CCIC is not set
+# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CQCAM is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_CX231XX is not set
+# CONFIG_VIDEO_CX2341X is not set
+# CONFIG_VIDEO_CX25840 is not set
+# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_DT3155 is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_GO7007 is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_IR_I2C is not set
+# CONFIG_VIDEO_IVTV is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_MEDIA is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_MXB is not set
+# CONFIG_VIDEO_NOON010PC30 is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_SAA6588 is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7134 is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+# CONFIG_VIDEO_SR030PC30 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_TIMBERDALE is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_TM6000 is not set
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_TVP7002 is not set
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_VIDEO_V4L2 is not set
+# CONFIG_VIDEO_V4L2_COMMON is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+# CONFIG_VIDEO_VPX3220 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_ZORAN is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_VIRTIO_BALLOON is not set
+# CONFIG_VIRTIO_MMIO is not set
+# CONFIG_VIRTIO_PCI is not set
+# CONFIG_VIRTUALIZATION is not set
+# CONFIG_VIRT_DRIVERS is not set
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_VITESSE_PHY is not set
+CONFIG_VLAN_8021Q=y
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_VME_BUS is not set
+# CONFIG_VMSPLIT_1G is not set
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_2G_OPT is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_3G_OPT is not set
+# CONFIG_VMWARE_PVSCSI is not set
+# CONFIG_VMXNET3 is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_VORTEX is not set
+# CONFIG_VT is not set
+# CONFIG_VT6655 is not set
+# CONFIG_VT6656 is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_VXGE is not set
+# CONFIG_VXLAN is not set
+# CONFIG_W1 is not set
+# CONFIG_W1_CON is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS2490 is not set
+# CONFIG_W1_MASTER_GPIO is not set
+# CONFIG_W1_MASTER_MATROX is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
+# CONFIG_W1_SLAVE_DS2408 is not set
+# CONFIG_W1_SLAVE_DS2423 is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_DS2780 is not set
+# CONFIG_W1_SLAVE_DS2781 is not set
+# CONFIG_W1_SLAVE_DS28E04 is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W83627HF_WDT is not set
+# CONFIG_W83697HF_WDT is not set
+# CONFIG_W83877F_WDT is not set
+# CONFIG_W83977F_WDT is not set
+# CONFIG_WAN is not set
+# CONFIG_WANXL is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_CORE is not set
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+# CONFIG_WD80x3 is not set
+# CONFIG_WDTPCI is not set
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PRIV=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+# CONFIG_WIMAX is not set
+# CONFIG_WIMAX_GDM72XX is not set
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
+# CONFIG_WLAGS49_H2 is not set
+# CONFIG_WLAGS49_H25 is not set
+CONFIG_WLAN=y
+# CONFIG_WL_TI is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_X25 is not set
+CONFIG_XFRM=y
+# CONFIG_XFRM_IPCOMP is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XILINX_EMACLITE is not set
+# CONFIG_XILINX_LL_TEMAC is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_XMON is not set
+# CONFIG_XVMALLOC is not set
+# CONFIG_XZ_DEC is not set
+# CONFIG_XZ_DEC_ARM is not set
+# CONFIG_XZ_DEC_ARMTHUMB is not set
+# CONFIG_XZ_DEC_BCJ is not set
+# CONFIG_XZ_DEC_IA64 is not set
+# CONFIG_XZ_DEC_POWERPC is not set
+# CONFIG_XZ_DEC_SPARC is not set
+# CONFIG_XZ_DEC_TEST is not set
+# CONFIG_XZ_DEC_X86 is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_YAM is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_YENTA is not set
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+# CONFIG_YENTA_TI is not set
+# CONFIG_YENTA_TOSHIBA is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_ZD1211RW_DEBUG is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_ZISOFS=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+# CONFIG_ZNET is not set
+CONFIG_ZONE_DMA=y
+CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_ZRAM is not set
+# CONFIG_ZSMALLOC is not set
--- /dev/null
+--- a/drivers/ssb/b43_pci_bridge.c
++++ b/drivers/ssb/b43_pci_bridge.c
+@@ -37,6 +37,7 @@ static const struct pci_device_id b43_pc
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4329) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x432b) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x432c) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4350) },
+ { 0, },
+ };
+ MODULE_DEVICE_TABLE(pci, b43_pci_bridge_tbl);
--- /dev/null
+--- a/drivers/ssb/driver_chipcommon_pmu.c
++++ b/drivers/ssb/driver_chipcommon_pmu.c
+@@ -346,6 +346,8 @@ static void ssb_pmu_pll_init(struct ssb_
+ chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, 0x380005C0);
+ }
+ break;
++ case 43222:
++ break;
+ default:
+ ssb_printk(KERN_ERR PFX
+ "ERROR: PLL init unknown for device %04X\n",
+@@ -434,6 +436,7 @@ static void ssb_pmu_resources_init(struc
+ min_msk = 0xCBB;
+ break;
+ case 0x4322:
++ case 43222:
+ /* We keep the default settings:
+ * min_msk = 0xCBB
+ * max_msk = 0x7FFFF
--- /dev/null
+--- a/drivers/net/usb/hso.c
++++ b/drivers/net/usb/hso.c
+@@ -468,8 +468,10 @@ static const struct usb_device_id hso_id
+ {USB_DEVICE(0x0af0, 0x8400)},
+ {USB_DEVICE(0x0af0, 0x8600)},
+ {USB_DEVICE(0x0af0, 0x8800)},
+- {USB_DEVICE(0x0af0, 0x8900)},
+- {USB_DEVICE(0x0af0, 0x9000)},
++ {USB_DEVICE(0x0af0, 0x8900)}, /* GTM 67xx */
++ {USB_DEVICE(0x0af0, 0x9000)}, /* GTM 66xx */
++ {USB_DEVICE(0x0af0, 0x9200)}, /* GTM 67xxWFS */
++ {USB_DEVICE(0x0af0, 0x9300)}, /* GTM 66xxWFS */
+ {USB_DEVICE(0x0af0, 0xd035)},
+ {USB_DEVICE(0x0af0, 0xd055)},
+ {USB_DEVICE(0x0af0, 0xd155)},
+--- a/drivers/usb/storage/unusual_devs.h
++++ b/drivers/usb/storage/unusual_devs.h
+@@ -1237,6 +1237,18 @@ UNUSUAL_DEV( 0x0af0, 0x8304, 0x0000, 0x0
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ 0 ),
+
++UNUSUAL_DEV( 0x0af0, 0x9200, 0x0000, 0x0000,
++ "Option",
++ "Globetrotter 67xxWFS SD-Card",
++ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
++ 0 ),
++
++UNUSUAL_DEV( 0x0af0, 0x9300, 0x0000, 0x0000,
++ "Option",
++ "Globetrotter 66xxWFS SD-Card",
++ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
++ 0 ),
++
+ UNUSUAL_DEV( 0x0af0, 0xc100, 0x0000, 0x0000,
+ "Option",
+ "GI 070x SD-Card",
--- /dev/null
+--- a/arch/arm/boot/compressed/decompress.c
++++ b/arch/arm/boot/compressed/decompress.c
+@@ -50,6 +50,7 @@ extern char * strstr(const char * s1, co
+ #ifdef CONFIG_KERNEL_XZ
+ #define memmove memmove
+ #define memcpy memcpy
++extern char * strstr(const char *, const char *);
+ #include "../../../../lib/decompress_unxz.c"
+ #endif
+
--- /dev/null
+From 0db3db45f5bd6df4bdc03bbd5dec672e16164c4e Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 12 Nov 2012 12:31:55 +0100
+Subject: [PATCH] MIPS: decompressor: fix build failure on memcpy() in
+ decompress.c
+
+The decompress.c file includes linux/kernel.h which causes the following
+inclusion chain to be pulled:
+linux/kernel.h ->
+ linux/dynamic_debug.h ->
+ linux/string.h ->
+ asm/string.h
+
+We end up having a the GCC builtin + architecture specific memcpy() expanding
+into this:
+
+void *({ size_t __len = (size_t n); void *__ret; if
+(__builtin_constant_p(size_t n) && __len >= 64) __ret = memcpy((void *dest),
+(const void *src), __len); else __ret = __builtin_memcpy((void *dest), (const
+void *src), __len); __ret; })
+{
+ [memcpy implementation in decompress.c starts here]
+ int i;
+ const char *s = src;
+ char *d = dest;
+
+ for (i = 0; i < n; i++)
+ d[i] = s[i];
+ return dest;
+}
+
+raising the following compilation error:
+arch/mips/boot/compressed/decompress.c:46:8: error: expected identifier or '('
+before '{' token
+
+There are at least three possibilities to fix this issue:
+
+1) define _LINUX_STRING_H_ at the beginning of decompress.c to prevent
+ further linux/string.h definitions and declarations from being used, and add
+ an explicit strstr() declaration for linux/dynamic_debug.h
+
+2) remove the inclusion of linux/kernel.h because we actually use no definition
+ or declaration from this header file
+
+3) undefine memcpy or re-define memcpy to memcpy thus resulting in picking up
+ the local memcpy() implementation to this compilation unit
+
+This patch uses the second option which is the less intrusive one.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/boot/compressed/decompress.c | 2 --
+ 1 file changed, 2 deletions(-)
+
+--- a/arch/mips/boot/compressed/decompress.c
++++ b/arch/mips/boot/compressed/decompress.c
+@@ -10,9 +10,7 @@
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+-
+ #include <linux/types.h>
+-#include <linux/kernel.h>
+
+ #include <asm/addrspace.h>
+
--- /dev/null
+--- a/Documentation/filesystems/Locking
++++ b/Documentation/filesystems/Locking
+@@ -64,6 +64,7 @@ prototypes:
+ int (*atomic_open)(struct inode *, struct dentry *,
+ struct file *, unsigned open_flag,
+ umode_t create_mode, int *opened);
++ int (*dentry_open)(struct dentry *, struct file *, const struct cred *);
+
+ locking rules:
+ all may block
+@@ -92,6 +93,7 @@ removexattr: yes
+ fiemap: no
+ update_time: no
+ atomic_open: yes
++dentry_open: no
+
+ Additionally, ->rmdir(), ->unlink() and ->rename() have ->i_mutex on
+ victim.
+--- /dev/null
++++ b/Documentation/filesystems/overlayfs.txt
+@@ -0,0 +1,199 @@
++Written by: Neil Brown <neilb@suse.de>
++
++Overlay Filesystem
++==================
++
++This document describes a prototype for a new approach to providing
++overlay-filesystem functionality in Linux (sometimes referred to as
++union-filesystems). An overlay-filesystem tries to present a
++filesystem which is the result over overlaying one filesystem on top
++of the other.
++
++The result will inevitably fail to look exactly like a normal
++filesystem for various technical reasons. The expectation is that
++many use cases will be able to ignore these differences.
++
++This approach is 'hybrid' because the objects that appear in the
++filesystem do not all appear to belong to that filesystem. In many
++cases an object accessed in the union will be indistinguishable
++from accessing the corresponding object from the original filesystem.
++This is most obvious from the 'st_dev' field returned by stat(2).
++
++While directories will report an st_dev from the overlay-filesystem,
++all non-directory objects will report an st_dev from the lower or
++upper filesystem that is providing the object. Similarly st_ino will
++only be unique when combined with st_dev, and both of these can change
++over the lifetime of a non-directory object. Many applications and
++tools ignore these values and will not be affected.
++
++Upper and Lower
++---------------
++
++An overlay filesystem combines two filesystems - an 'upper' filesystem
++and a 'lower' filesystem. When a name exists in both filesystems, the
++object in the 'upper' filesystem is visible while the object in the
++'lower' filesystem is either hidden or, in the case of directories,
++merged with the 'upper' object.
++
++It would be more correct to refer to an upper and lower 'directory
++tree' rather than 'filesystem' as it is quite possible for both
++directory trees to be in the same filesystem and there is no
++requirement that the root of a filesystem be given for either upper or
++lower.
++
++The lower filesystem can be any filesystem supported by Linux and does
++not need to be writable. The lower filesystem can even be another
++overlayfs. The upper filesystem will normally be writable and if it
++is it must support the creation of trusted.* extended attributes, and
++must provide valid d_type in readdir responses, at least for symbolic
++links - so NFS is not suitable.
++
++A read-only overlay of two read-only filesystems may use any
++filesystem type.
++
++Directories
++-----------
++
++Overlaying mainly involves directories. If a given name appears in both
++upper and lower filesystems and refers to a non-directory in either,
++then the lower object is hidden - the name refers only to the upper
++object.
++
++Where both upper and lower objects are directories, a merged directory
++is formed.
++
++At mount time, the two directories given as mount options are combined
++into a merged directory:
++
++ mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper /overlay
++
++Then whenever a lookup is requested in such a merged directory, the
++lookup is performed in each actual directory and the combined result
++is cached in the dentry belonging to the overlay filesystem. If both
++actual lookups find directories, both are stored and a merged
++directory is created, otherwise only one is stored: the upper if it
++exists, else the lower.
++
++Only the lists of names from directories are merged. Other content
++such as metadata and extended attributes are reported for the upper
++directory only. These attributes of the lower directory are hidden.
++
++whiteouts and opaque directories
++--------------------------------
++
++In order to support rm and rmdir without changing the lower
++filesystem, an overlay filesystem needs to record in the upper filesystem
++that files have been removed. This is done using whiteouts and opaque
++directories (non-directories are always opaque).
++
++The overlay filesystem uses extended attributes with a
++"trusted.overlay." prefix to record these details.
++
++A whiteout is created as a symbolic link with target
++"(overlay-whiteout)" and with xattr "trusted.overlay.whiteout" set to "y".
++When a whiteout is found in the upper level of a merged directory, any
++matching name in the lower level is ignored, and the whiteout itself
++is also hidden.
++
++A directory is made opaque by setting the xattr "trusted.overlay.opaque"
++to "y". Where the upper filesystem contains an opaque directory, any
++directory in the lower filesystem with the same name is ignored.
++
++readdir
++-------
++
++When a 'readdir' request is made on a merged directory, the upper and
++lower directories are each read and the name lists merged in the
++obvious way (upper is read first, then lower - entries that already
++exist are not re-added). This merged name list is cached in the
++'struct file' and so remains as long as the file is kept open. If the
++directory is opened and read by two processes at the same time, they
++will each have separate caches. A seekdir to the start of the
++directory (offset 0) followed by a readdir will cause the cache to be
++discarded and rebuilt.
++
++This means that changes to the merged directory do not appear while a
++directory is being read. This is unlikely to be noticed by many
++programs.
++
++seek offsets are assigned sequentially when the directories are read.
++Thus if
++ - read part of a directory
++ - remember an offset, and close the directory
++ - re-open the directory some time later
++ - seek to the remembered offset
++
++there may be little correlation between the old and new locations in
++the list of filenames, particularly if anything has changed in the
++directory.
++
++Readdir on directories that are not merged is simply handled by the
++underlying directory (upper or lower).
++
++
++Non-directories
++---------------
++
++Objects that are not directories (files, symlinks, device-special
++files etc.) are presented either from the upper or lower filesystem as
++appropriate. When a file in the lower filesystem is accessed in a way
++the requires write-access, such as opening for write access, changing
++some metadata etc., the file is first copied from the lower filesystem
++to the upper filesystem (copy_up). Note that creating a hard-link
++also requires copy_up, though of course creation of a symlink does
++not.
++
++The copy_up may turn out to be unnecessary, for example if the file is
++opened for read-write but the data is not modified.
++
++The copy_up process first makes sure that the containing directory
++exists in the upper filesystem - creating it and any parents as
++necessary. It then creates the object with the same metadata (owner,
++mode, mtime, symlink-target etc.) and then if the object is a file, the
++data is copied from the lower to the upper filesystem. Finally any
++extended attributes are copied up.
++
++Once the copy_up is complete, the overlay filesystem simply
++provides direct access to the newly created file in the upper
++filesystem - future operations on the file are barely noticed by the
++overlay filesystem (though an operation on the name of the file such as
++rename or unlink will of course be noticed and handled).
++
++
++Non-standard behavior
++---------------------
++
++The copy_up operation essentially creates a new, identical file and
++moves it over to the old name. The new file may be on a different
++filesystem, so both st_dev and st_ino of the file may change.
++
++Any open files referring to this inode will access the old data and
++metadata. Similarly any file locks obtained before copy_up will not
++apply to the copied up file.
++
++On a file opened with O_RDONLY fchmod(2), fchown(2), futimesat(2) and
++fsetxattr(2) will fail with EROFS.
++
++If a file with multiple hard links is copied up, then this will
++"break" the link. Changes will not be propagated to other names
++referring to the same inode.
++
++Symlinks in /proc/PID/ and /proc/PID/fd which point to a non-directory
++object in overlayfs will not contain valid absolute paths, only
++relative paths leading up to the filesystem's root. This will be
++fixed in the future.
++
++Some operations are not atomic, for example a crash during copy_up or
++rename will leave the filesystem in an inconsistent state. This will
++be addressed in the future.
++
++Changes to underlying filesystems
++---------------------------------
++
++Offline changes, when the overlay is not mounted, are allowed to either
++the upper or the lower trees.
++
++Changes to the underlying filesystems while part of a mounted overlay
++filesystem are not allowed. If the underlying filesystem is changed,
++the behavior of the overlay is undefined, though it will not result in
++a crash or deadlock.
+--- a/Documentation/filesystems/vfs.txt
++++ b/Documentation/filesystems/vfs.txt
+@@ -363,6 +363,7 @@ struct inode_operations {
+ int (*atomic_open)(struct inode *, struct dentry *,
+ struct file *, unsigned open_flag,
+ umode_t create_mode, int *opened);
++ int (*dentry_open)(struct dentry *, struct file *, const struct cred *);
+ };
+
+ Again, all methods are called without any locks being held, unless
+@@ -692,6 +693,12 @@ struct address_space_operations {
+ but instead uses bmap to find out where the blocks in the file
+ are and uses those addresses directly.
+
++ dentry_open: this is an alternative to f_op->open(), the difference is that
++ this method may open a file not necessarily originating from the same
++ filesystem as the one i_op->open() was called on. It may be
++ useful for stacking filesystems which want to allow native I/O directly
++ on underlying files.
++
+
+ invalidatepage: If a page has PagePrivate set, then invalidatepage
+ will be called when part or all of the page is to be removed
+--- a/fs/ecryptfs/main.c
++++ b/fs/ecryptfs/main.c
+@@ -567,6 +567,13 @@ static struct dentry *ecryptfs_mount(str
+ s->s_maxbytes = path.dentry->d_sb->s_maxbytes;
+ s->s_blocksize = path.dentry->d_sb->s_blocksize;
+ s->s_magic = ECRYPTFS_SUPER_MAGIC;
++ s->s_stack_depth = path.dentry->d_sb->s_stack_depth + 1;
++
++ rc = -EINVAL;
++ if (s->s_stack_depth > FILESYSTEM_MAX_STACK_DEPTH) {
++ printk(KERN_ERR "eCryptfs: maximum fs stacking depth exceeded\n");
++ goto out_free;
++ }
+
+ inode = ecryptfs_get_inode(path.dentry->d_inode, s);
+ rc = PTR_ERR(inode);
+--- a/fs/internal.h
++++ b/fs/internal.h
+@@ -42,11 +42,6 @@ static inline int __sync_blockdev(struct
+ extern void __init chrdev_init(void);
+
+ /*
+- * namei.c
+- */
+-extern int __inode_permission(struct inode *, int);
+-
+-/*
+ * namespace.c
+ */
+ extern int copy_mount_options(const void __user *, unsigned long *);
+--- a/fs/Kconfig
++++ b/fs/Kconfig
+@@ -67,6 +67,7 @@ source "fs/quota/Kconfig"
+
+ source "fs/autofs4/Kconfig"
+ source "fs/fuse/Kconfig"
++source "fs/overlayfs/Kconfig"
+
+ config CUSE
+ tristate "Character device in Userspace support"
+--- a/fs/Makefile
++++ b/fs/Makefile
+@@ -107,6 +107,7 @@ obj-$(CONFIG_QNX6FS_FS) += qnx6/
+ obj-$(CONFIG_AUTOFS4_FS) += autofs4/
+ obj-$(CONFIG_ADFS_FS) += adfs/
+ obj-$(CONFIG_FUSE_FS) += fuse/
++obj-$(CONFIG_OVERLAYFS_FS) += overlayfs/
+ obj-$(CONFIG_UDF_FS) += udf/
+ obj-$(CONFIG_SUN_OPENPROMFS) += openpromfs/
+ obj-$(CONFIG_OMFS_FS) += omfs/
+--- a/fs/namei.c
++++ b/fs/namei.c
+@@ -402,6 +402,7 @@ int __inode_permission(struct inode *ino
+
+ return security_inode_permission(inode, mask);
+ }
++EXPORT_SYMBOL(__inode_permission);
+
+ /**
+ * sb_permission - Check superblock-level permissions
+@@ -2883,9 +2884,12 @@ finish_open_created:
+ error = may_open(&nd->path, acc_mode, open_flag);
+ if (error)
+ goto out;
+- file->f_path.mnt = nd->path.mnt;
+- error = finish_open(file, nd->path.dentry, NULL, opened);
+- if (error) {
++
++ BUG_ON(*opened & FILE_OPENED); /* once it's opened, it's opened */
++ error = vfs_open(&nd->path, file, current_cred());
++ if (!error) {
++ *opened |= FILE_OPENED;
++ } else {
+ if (error == -EOPENSTALE)
+ goto stale_open;
+ goto out;
+--- a/fs/namespace.c
++++ b/fs/namespace.c
+@@ -1387,6 +1387,24 @@ void drop_collected_mounts(struct vfsmou
+ release_mounts(&umount_list);
+ }
+
++struct vfsmount *clone_private_mount(struct path *path)
++{
++ struct mount *old_mnt = real_mount(path->mnt);
++ struct mount *new_mnt;
++
++ if (IS_MNT_UNBINDABLE(old_mnt))
++ return ERR_PTR(-EINVAL);
++
++ down_read(&namespace_sem);
++ new_mnt = clone_mnt(old_mnt, path->dentry, CL_PRIVATE);
++ up_read(&namespace_sem);
++ if (!new_mnt)
++ return ERR_PTR(-ENOMEM);
++
++ return &new_mnt->mnt;
++}
++EXPORT_SYMBOL_GPL(clone_private_mount);
++
+ int iterate_mounts(int (*f)(struct vfsmount *, void *), void *arg,
+ struct vfsmount *root)
+ {
+--- a/fs/open.c
++++ b/fs/open.c
+@@ -781,8 +781,7 @@ struct file *dentry_open(const struct pa
+ return ERR_PTR(error);
+
+ f->f_flags = flags;
+- f->f_path = *path;
+- error = do_dentry_open(f, NULL, cred);
++ error = vfs_open(path, f, cred);
+ if (!error) {
+ error = open_check_o_direct(f);
+ if (error) {
+@@ -797,6 +796,26 @@ struct file *dentry_open(const struct pa
+ }
+ EXPORT_SYMBOL(dentry_open);
+
++/**
++ * vfs_open - open the file at the given path
++ * @path: path to open
++ * @filp: newly allocated file with f_flag initialized
++ * @cred: credentials to use
++ */
++int vfs_open(const struct path *path, struct file *filp,
++ const struct cred *cred)
++{
++ struct inode *inode = path->dentry->d_inode;
++
++ if (inode->i_op->dentry_open)
++ return inode->i_op->dentry_open(path->dentry, filp, cred);
++ else {
++ filp->f_path = *path;
++ return do_dentry_open(filp, NULL, cred);
++ }
++}
++EXPORT_SYMBOL(vfs_open);
++
+ static inline int build_open_flags(int flags, umode_t mode, struct open_flags *op)
+ {
+ int lookup_flags = 0;
+--- /dev/null
++++ b/fs/overlayfs/copy_up.c
+@@ -0,0 +1,385 @@
++/*
++ *
++ * Copyright (C) 2011 Novell Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ */
++
++#include <linux/fs.h>
++#include <linux/slab.h>
++#include <linux/file.h>
++#include <linux/splice.h>
++#include <linux/xattr.h>
++#include <linux/security.h>
++#include <linux/uaccess.h>
++#include <linux/sched.h>
++#include "overlayfs.h"
++
++#define OVL_COPY_UP_CHUNK_SIZE (1 << 20)
++
++static int ovl_copy_up_xattr(struct dentry *old, struct dentry *new)
++{
++ ssize_t list_size, size;
++ char *buf, *name, *value;
++ int error;
++
++ if (!old->d_inode->i_op->getxattr ||
++ !new->d_inode->i_op->getxattr)
++ return 0;
++
++ list_size = vfs_listxattr(old, NULL, 0);
++ if (list_size <= 0) {
++ if (list_size == -EOPNOTSUPP)
++ return 0;
++ return list_size;
++ }
++
++ buf = kzalloc(list_size, GFP_KERNEL);
++ if (!buf)
++ return -ENOMEM;
++
++ error = -ENOMEM;
++ value = kmalloc(XATTR_SIZE_MAX, GFP_KERNEL);
++ if (!value)
++ goto out;
++
++ list_size = vfs_listxattr(old, buf, list_size);
++ if (list_size <= 0) {
++ error = list_size;
++ goto out_free_value;
++ }
++
++ for (name = buf; name < (buf + list_size); name += strlen(name) + 1) {
++ size = vfs_getxattr(old, name, value, XATTR_SIZE_MAX);
++ if (size <= 0) {
++ error = size;
++ goto out_free_value;
++ }
++ error = vfs_setxattr(new, name, value, size, 0);
++ if (error)
++ goto out_free_value;
++ }
++
++out_free_value:
++ kfree(value);
++out:
++ kfree(buf);
++ return error;
++}
++
++static int ovl_copy_up_data(struct path *old, struct path *new, loff_t len)
++{
++ struct file *old_file;
++ struct file *new_file;
++ int error = 0;
++
++ if (len == 0)
++ return 0;
++
++ old_file = ovl_path_open(old, O_RDONLY);
++ if (IS_ERR(old_file))
++ return PTR_ERR(old_file);
++
++ new_file = ovl_path_open(new, O_WRONLY);
++ if (IS_ERR(new_file)) {
++ error = PTR_ERR(new_file);
++ goto out_fput;
++ }
++
++ /* FIXME: copy up sparse files efficiently */
++ while (len) {
++ loff_t offset = new_file->f_pos;
++ size_t this_len = OVL_COPY_UP_CHUNK_SIZE;
++ long bytes;
++
++ if (len < this_len)
++ this_len = len;
++
++ if (signal_pending_state(TASK_KILLABLE, current)) {
++ error = -EINTR;
++ break;
++ }
++
++ bytes = do_splice_direct(old_file, &offset, new_file, this_len,
++ SPLICE_F_MOVE);
++ if (bytes <= 0) {
++ error = bytes;
++ break;
++ }
++
++ len -= bytes;
++ }
++
++ fput(new_file);
++out_fput:
++ fput(old_file);
++ return error;
++}
++
++static char *ovl_read_symlink(struct dentry *realdentry)
++{
++ int res;
++ char *buf;
++ struct inode *inode = realdentry->d_inode;
++ mm_segment_t old_fs;
++
++ res = -EINVAL;
++ if (!inode->i_op->readlink)
++ goto err;
++
++ res = -ENOMEM;
++ buf = (char *) __get_free_page(GFP_KERNEL);
++ if (!buf)
++ goto err;
++
++ old_fs = get_fs();
++ set_fs(get_ds());
++ /* The cast to a user pointer is valid due to the set_fs() */
++ res = inode->i_op->readlink(realdentry,
++ (char __user *)buf, PAGE_SIZE - 1);
++ set_fs(old_fs);
++ if (res < 0) {
++ free_page((unsigned long) buf);
++ goto err;
++ }
++ buf[res] = '\0';
++
++ return buf;
++
++err:
++ return ERR_PTR(res);
++}
++
++static int ovl_set_timestamps(struct dentry *upperdentry, struct kstat *stat)
++{
++ struct iattr attr = {
++ .ia_valid =
++ ATTR_ATIME | ATTR_MTIME | ATTR_ATIME_SET | ATTR_MTIME_SET,
++ .ia_atime = stat->atime,
++ .ia_mtime = stat->mtime,
++ };
++
++ return notify_change(upperdentry, &attr);
++}
++
++static int ovl_set_mode(struct dentry *upperdentry, umode_t mode)
++{
++ struct iattr attr = {
++ .ia_valid = ATTR_MODE,
++ .ia_mode = mode,
++ };
++
++ return notify_change(upperdentry, &attr);
++}
++
++static int ovl_copy_up_locked(struct dentry *upperdir, struct dentry *dentry,
++ struct path *lowerpath, struct kstat *stat,
++ const char *link)
++{
++ int err;
++ struct path newpath;
++ umode_t mode = stat->mode;
++
++ /* Can't properly set mode on creation because of the umask */
++ stat->mode &= S_IFMT;
++
++ ovl_path_upper(dentry, &newpath);
++ WARN_ON(newpath.dentry);
++ newpath.dentry = ovl_upper_create(upperdir, dentry, stat, link);
++ if (IS_ERR(newpath.dentry))
++ return PTR_ERR(newpath.dentry);
++
++ if (S_ISREG(stat->mode)) {
++ err = ovl_copy_up_data(lowerpath, &newpath, stat->size);
++ if (err)
++ goto err_remove;
++ }
++
++ err = ovl_copy_up_xattr(lowerpath->dentry, newpath.dentry);
++ if (err)
++ goto err_remove;
++
++ mutex_lock(&newpath.dentry->d_inode->i_mutex);
++ if (!S_ISLNK(stat->mode))
++ err = ovl_set_mode(newpath.dentry, mode);
++ if (!err)
++ err = ovl_set_timestamps(newpath.dentry, stat);
++ mutex_unlock(&newpath.dentry->d_inode->i_mutex);
++ if (err)
++ goto err_remove;
++
++ ovl_dentry_update(dentry, newpath.dentry);
++
++ /*
++ * Easiest way to get rid of the lower dentry reference is to
++ * drop this dentry. This is neither needed nor possible for
++ * directories.
++ */
++ if (!S_ISDIR(stat->mode))
++ d_drop(dentry);
++
++ return 0;
++
++err_remove:
++ if (S_ISDIR(stat->mode))
++ vfs_rmdir(upperdir->d_inode, newpath.dentry);
++ else
++ vfs_unlink(upperdir->d_inode, newpath.dentry);
++
++ dput(newpath.dentry);
++
++ return err;
++}
++
++/*
++ * Copy up a single dentry
++ *
++ * Directory renames only allowed on "pure upper" (already created on
++ * upper filesystem, never copied up). Directories which are on lower or
++ * are merged may not be renamed. For these -EXDEV is returned and
++ * userspace has to deal with it. This means, when copying up a
++ * directory we can rely on it and ancestors being stable.
++ *
++ * Non-directory renames start with copy up of source if necessary. The
++ * actual rename will only proceed once the copy up was successful. Copy
++ * up uses upper parent i_mutex for exclusion. Since rename can change
++ * d_parent it is possible that the copy up will lock the old parent. At
++ * that point the file will have already been copied up anyway.
++ */
++static int ovl_copy_up_one(struct dentry *parent, struct dentry *dentry,
++ struct path *lowerpath, struct kstat *stat)
++{
++ int err;
++ struct kstat pstat;
++ struct path parentpath;
++ struct dentry *upperdir;
++ const struct cred *old_cred;
++ struct cred *override_cred;
++ char *link = NULL;
++
++ ovl_path_upper(parent, &parentpath);
++ upperdir = parentpath.dentry;
++
++ err = vfs_getattr(parentpath.mnt, parentpath.dentry, &pstat);
++ if (err)
++ return err;
++
++ if (S_ISLNK(stat->mode)) {
++ link = ovl_read_symlink(lowerpath->dentry);
++ if (IS_ERR(link))
++ return PTR_ERR(link);
++ }
++
++ err = -ENOMEM;
++ override_cred = prepare_creds();
++ if (!override_cred)
++ goto out_free_link;
++
++ override_cred->fsuid = stat->uid;
++ override_cred->fsgid = stat->gid;
++ /*
++ * CAP_SYS_ADMIN for copying up extended attributes
++ * CAP_DAC_OVERRIDE for create
++ * CAP_FOWNER for chmod, timestamp update
++ * CAP_FSETID for chmod
++ * CAP_MKNOD for mknod
++ */
++ cap_raise(override_cred->cap_effective, CAP_SYS_ADMIN);
++ cap_raise(override_cred->cap_effective, CAP_DAC_OVERRIDE);
++ cap_raise(override_cred->cap_effective, CAP_FOWNER);
++ cap_raise(override_cred->cap_effective, CAP_FSETID);
++ cap_raise(override_cred->cap_effective, CAP_MKNOD);
++ old_cred = override_creds(override_cred);
++
++ mutex_lock_nested(&upperdir->d_inode->i_mutex, I_MUTEX_PARENT);
++ if (ovl_path_type(dentry) != OVL_PATH_LOWER) {
++ err = 0;
++ } else {
++ err = ovl_copy_up_locked(upperdir, dentry, lowerpath,
++ stat, link);
++ if (!err) {
++ /* Restore timestamps on parent (best effort) */
++ ovl_set_timestamps(upperdir, &pstat);
++ }
++ }
++
++ mutex_unlock(&upperdir->d_inode->i_mutex);
++
++ revert_creds(old_cred);
++ put_cred(override_cred);
++
++out_free_link:
++ if (link)
++ free_page((unsigned long) link);
++
++ return err;
++}
++
++int ovl_copy_up(struct dentry *dentry)
++{
++ int err;
++
++ err = 0;
++ while (!err) {
++ struct dentry *next;
++ struct dentry *parent;
++ struct path lowerpath;
++ struct kstat stat;
++ enum ovl_path_type type = ovl_path_type(dentry);
++
++ if (type != OVL_PATH_LOWER)
++ break;
++
++ next = dget(dentry);
++ /* find the topmost dentry not yet copied up */
++ for (;;) {
++ parent = dget_parent(next);
++
++ type = ovl_path_type(parent);
++ if (type != OVL_PATH_LOWER)
++ break;
++
++ dput(next);
++ next = parent;
++ }
++
++ ovl_path_lower(next, &lowerpath);
++ err = vfs_getattr(lowerpath.mnt, lowerpath.dentry, &stat);
++ if (!err)
++ err = ovl_copy_up_one(parent, next, &lowerpath, &stat);
++
++ dput(parent);
++ dput(next);
++ }
++
++ return err;
++}
++
++/* Optimize by not copying up the file first and truncating later */
++int ovl_copy_up_truncate(struct dentry *dentry, loff_t size)
++{
++ int err;
++ struct kstat stat;
++ struct path lowerpath;
++ struct dentry *parent = dget_parent(dentry);
++
++ err = ovl_copy_up(parent);
++ if (err)
++ goto out_dput_parent;
++
++ ovl_path_lower(dentry, &lowerpath);
++ err = vfs_getattr(lowerpath.mnt, lowerpath.dentry, &stat);
++ if (err)
++ goto out_dput_parent;
++
++ if (size < stat.size)
++ stat.size = size;
++
++ err = ovl_copy_up_one(parent, dentry, &lowerpath, &stat);
++
++out_dput_parent:
++ dput(parent);
++ return err;
++}
+--- /dev/null
++++ b/fs/overlayfs/dir.c
+@@ -0,0 +1,604 @@
++/*
++ *
++ * Copyright (C) 2011 Novell Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ */
++
++#include <linux/fs.h>
++#include <linux/namei.h>
++#include <linux/xattr.h>
++#include <linux/security.h>
++#include <linux/cred.h>
++#include "overlayfs.h"
++
++static const char *ovl_whiteout_symlink = "(overlay-whiteout)";
++
++static int ovl_whiteout(struct dentry *upperdir, struct dentry *dentry)
++{
++ int err;
++ struct dentry *newdentry;
++ const struct cred *old_cred;
++ struct cred *override_cred;
++
++ /* FIXME: recheck lower dentry to see if whiteout is really needed */
++
++ err = -ENOMEM;
++ override_cred = prepare_creds();
++ if (!override_cred)
++ goto out;
++
++ /*
++ * CAP_SYS_ADMIN for setxattr
++ * CAP_DAC_OVERRIDE for symlink creation
++ * CAP_FOWNER for unlink in sticky directory
++ */
++ cap_raise(override_cred->cap_effective, CAP_SYS_ADMIN);
++ cap_raise(override_cred->cap_effective, CAP_DAC_OVERRIDE);
++ cap_raise(override_cred->cap_effective, CAP_FOWNER);
++ override_cred->fsuid = GLOBAL_ROOT_UID;
++ override_cred->fsgid = GLOBAL_ROOT_GID;
++ old_cred = override_creds(override_cred);
++
++ newdentry = lookup_one_len(dentry->d_name.name, upperdir,
++ dentry->d_name.len);
++ err = PTR_ERR(newdentry);
++ if (IS_ERR(newdentry))
++ goto out_put_cred;
++
++ /* Just been removed within the same locked region */
++ WARN_ON(newdentry->d_inode);
++
++ err = vfs_symlink(upperdir->d_inode, newdentry, ovl_whiteout_symlink);
++ if (err)
++ goto out_dput;
++
++ ovl_dentry_version_inc(dentry->d_parent);
++
++ err = vfs_setxattr(newdentry, ovl_whiteout_xattr, "y", 1, 0);
++ if (err)
++ vfs_unlink(upperdir->d_inode, newdentry);
++
++out_dput:
++ dput(newdentry);
++out_put_cred:
++ revert_creds(old_cred);
++ put_cred(override_cred);
++out:
++ if (err) {
++ /*
++ * There's no way to recover from failure to whiteout.
++ * What should we do? Log a big fat error and... ?
++ */
++ printk(KERN_ERR "overlayfs: ERROR - failed to whiteout '%s'\n",
++ dentry->d_name.name);
++ }
++
++ return err;
++}
++
++static struct dentry *ovl_lookup_create(struct dentry *upperdir,
++ struct dentry *template)
++{
++ int err;
++ struct dentry *newdentry;
++ struct qstr *name = &template->d_name;
++
++ newdentry = lookup_one_len(name->name, upperdir, name->len);
++ if (IS_ERR(newdentry))
++ return newdentry;
++
++ if (newdentry->d_inode) {
++ const struct cred *old_cred;
++ struct cred *override_cred;
++
++ /* No need to check whiteout if lower parent is non-existent */
++ err = -EEXIST;
++ if (!ovl_dentry_lower(template->d_parent))
++ goto out_dput;
++
++ if (!S_ISLNK(newdentry->d_inode->i_mode))
++ goto out_dput;
++
++ err = -ENOMEM;
++ override_cred = prepare_creds();
++ if (!override_cred)
++ goto out_dput;
++
++ /*
++ * CAP_SYS_ADMIN for getxattr
++ * CAP_FOWNER for unlink in sticky directory
++ */
++ cap_raise(override_cred->cap_effective, CAP_SYS_ADMIN);
++ cap_raise(override_cred->cap_effective, CAP_FOWNER);
++ old_cred = override_creds(override_cred);
++
++ err = -EEXIST;
++ if (ovl_is_whiteout(newdentry))
++ err = vfs_unlink(upperdir->d_inode, newdentry);
++
++ revert_creds(old_cred);
++ put_cred(override_cred);
++ if (err)
++ goto out_dput;
++
++ dput(newdentry);
++ newdentry = lookup_one_len(name->name, upperdir, name->len);
++ if (IS_ERR(newdentry)) {
++ ovl_whiteout(upperdir, template);
++ return newdentry;
++ }
++
++ /*
++ * Whiteout just been successfully removed, parent
++ * i_mutex is still held, there's no way the lookup
++ * could return positive.
++ */
++ WARN_ON(newdentry->d_inode);
++ }
++
++ return newdentry;
++
++out_dput:
++ dput(newdentry);
++ return ERR_PTR(err);
++}
++
++struct dentry *ovl_upper_create(struct dentry *upperdir, struct dentry *dentry,
++ struct kstat *stat, const char *link)
++{
++ int err;
++ struct dentry *newdentry;
++ struct inode *dir = upperdir->d_inode;
++
++ newdentry = ovl_lookup_create(upperdir, dentry);
++ if (IS_ERR(newdentry))
++ goto out;
++
++ switch (stat->mode & S_IFMT) {
++ case S_IFREG:
++ err = vfs_create(dir, newdentry, stat->mode, NULL);
++ break;
++
++ case S_IFDIR:
++ err = vfs_mkdir(dir, newdentry, stat->mode);
++ break;
++
++ case S_IFCHR:
++ case S_IFBLK:
++ case S_IFIFO:
++ case S_IFSOCK:
++ err = vfs_mknod(dir, newdentry, stat->mode, stat->rdev);
++ break;
++
++ case S_IFLNK:
++ err = vfs_symlink(dir, newdentry, link);
++ break;
++
++ default:
++ err = -EPERM;
++ }
++ if (err) {
++ if (ovl_dentry_is_opaque(dentry))
++ ovl_whiteout(upperdir, dentry);
++ dput(newdentry);
++ newdentry = ERR_PTR(err);
++ } else if (WARN_ON(!newdentry->d_inode)) {
++ /*
++ * Not quite sure if non-instantiated dentry is legal or not.
++ * VFS doesn't seem to care so check and warn here.
++ */
++ dput(newdentry);
++ newdentry = ERR_PTR(-ENOENT);
++ }
++
++out:
++ return newdentry;
++
++}
++
++static int ovl_set_opaque(struct dentry *upperdentry)
++{
++ int err;
++ const struct cred *old_cred;
++ struct cred *override_cred;
++
++ override_cred = prepare_creds();
++ if (!override_cred)
++ return -ENOMEM;
++
++ /* CAP_SYS_ADMIN for setxattr of "trusted" namespace */
++ cap_raise(override_cred->cap_effective, CAP_SYS_ADMIN);
++ old_cred = override_creds(override_cred);
++ err = vfs_setxattr(upperdentry, ovl_opaque_xattr, "y", 1, 0);
++ revert_creds(old_cred);
++ put_cred(override_cred);
++
++ return err;
++}
++
++static int ovl_remove_opaque(struct dentry *upperdentry)
++{
++ int err;
++ const struct cred *old_cred;
++ struct cred *override_cred;
++
++ override_cred = prepare_creds();
++ if (!override_cred)
++ return -ENOMEM;
++
++ /* CAP_SYS_ADMIN for removexattr of "trusted" namespace */
++ cap_raise(override_cred->cap_effective, CAP_SYS_ADMIN);
++ old_cred = override_creds(override_cred);
++ err = vfs_removexattr(upperdentry, ovl_opaque_xattr);
++ revert_creds(old_cred);
++ put_cred(override_cred);
++
++ return err;
++}
++
++static int ovl_dir_getattr(struct vfsmount *mnt, struct dentry *dentry,
++ struct kstat *stat)
++{
++ int err;
++ enum ovl_path_type type;
++ struct path realpath;
++
++ type = ovl_path_real(dentry, &realpath);
++ err = vfs_getattr(realpath.mnt, realpath.dentry, stat);
++ if (err)
++ return err;
++
++ stat->dev = dentry->d_sb->s_dev;
++ stat->ino = dentry->d_inode->i_ino;
++
++ /*
++ * It's probably not worth it to count subdirs to get the
++ * correct link count. nlink=1 seems to pacify 'find' and
++ * other utilities.
++ */
++ if (type == OVL_PATH_MERGE)
++ stat->nlink = 1;
++
++ return 0;
++}
++
++static int ovl_create_object(struct dentry *dentry, int mode, dev_t rdev,
++ const char *link)
++{
++ int err;
++ struct dentry *newdentry;
++ struct dentry *upperdir;
++ struct inode *inode;
++ struct kstat stat = {
++ .mode = mode,
++ .rdev = rdev,
++ };
++
++ err = -ENOMEM;
++ inode = ovl_new_inode(dentry->d_sb, mode, dentry->d_fsdata);
++ if (!inode)
++ goto out;
++
++ err = ovl_copy_up(dentry->d_parent);
++ if (err)
++ goto out_iput;
++
++ upperdir = ovl_dentry_upper(dentry->d_parent);
++ mutex_lock_nested(&upperdir->d_inode->i_mutex, I_MUTEX_PARENT);
++
++ newdentry = ovl_upper_create(upperdir, dentry, &stat, link);
++ err = PTR_ERR(newdentry);
++ if (IS_ERR(newdentry))
++ goto out_unlock;
++
++ ovl_dentry_version_inc(dentry->d_parent);
++ if (ovl_dentry_is_opaque(dentry) && S_ISDIR(mode)) {
++ err = ovl_set_opaque(newdentry);
++ if (err) {
++ vfs_rmdir(upperdir->d_inode, newdentry);
++ ovl_whiteout(upperdir, dentry);
++ goto out_dput;
++ }
++ }
++ ovl_dentry_update(dentry, newdentry);
++ ovl_copyattr(newdentry->d_inode, inode);
++ d_instantiate(dentry, inode);
++ inode = NULL;
++ newdentry = NULL;
++ err = 0;
++
++out_dput:
++ dput(newdentry);
++out_unlock:
++ mutex_unlock(&upperdir->d_inode->i_mutex);
++out_iput:
++ iput(inode);
++out:
++ return err;
++}
++
++static int ovl_create(struct inode *dir, struct dentry *dentry, umode_t mode,
++ bool excl)
++{
++ return ovl_create_object(dentry, (mode & 07777) | S_IFREG, 0, NULL);
++}
++
++static int ovl_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode)
++{
++ return ovl_create_object(dentry, (mode & 07777) | S_IFDIR, 0, NULL);
++}
++
++static int ovl_mknod(struct inode *dir, struct dentry *dentry, umode_t mode,
++ dev_t rdev)
++{
++ return ovl_create_object(dentry, mode, rdev, NULL);
++}
++
++static int ovl_symlink(struct inode *dir, struct dentry *dentry,
++ const char *link)
++{
++ return ovl_create_object(dentry, S_IFLNK, 0, link);
++}
++
++static int ovl_do_remove(struct dentry *dentry, bool is_dir)
++{
++ int err;
++ enum ovl_path_type type;
++ struct path realpath;
++ struct dentry *upperdir;
++
++ err = ovl_copy_up(dentry->d_parent);
++ if (err)
++ return err;
++
++ upperdir = ovl_dentry_upper(dentry->d_parent);
++ mutex_lock_nested(&upperdir->d_inode->i_mutex, I_MUTEX_PARENT);
++ type = ovl_path_real(dentry, &realpath);
++ if (type != OVL_PATH_LOWER) {
++ err = -ESTALE;
++ if (realpath.dentry->d_parent != upperdir)
++ goto out_d_drop;
++
++ /* FIXME: create whiteout up front and rename to target */
++
++ if (is_dir)
++ err = vfs_rmdir(upperdir->d_inode, realpath.dentry);
++ else
++ err = vfs_unlink(upperdir->d_inode, realpath.dentry);
++ if (err)
++ goto out_d_drop;
++
++ ovl_dentry_version_inc(dentry->d_parent);
++ }
++
++ if (type != OVL_PATH_UPPER || ovl_dentry_is_opaque(dentry))
++ err = ovl_whiteout(upperdir, dentry);
++
++ /*
++ * Keeping this dentry hashed would mean having to release
++ * upperpath/lowerpath, which could only be done if we are the
++ * sole user of this dentry. Too tricky... Just unhash for
++ * now.
++ */
++out_d_drop:
++ d_drop(dentry);
++ mutex_unlock(&upperdir->d_inode->i_mutex);
++
++ return err;
++}
++
++static int ovl_unlink(struct inode *dir, struct dentry *dentry)
++{
++ return ovl_do_remove(dentry, false);
++}
++
++
++static int ovl_rmdir(struct inode *dir, struct dentry *dentry)
++{
++ int err;
++ enum ovl_path_type type;
++
++ type = ovl_path_type(dentry);
++ if (type != OVL_PATH_UPPER) {
++ err = ovl_check_empty_and_clear(dentry, type);
++ if (err)
++ return err;
++ }
++
++ return ovl_do_remove(dentry, true);
++}
++
++static int ovl_link(struct dentry *old, struct inode *newdir,
++ struct dentry *new)
++{
++ int err;
++ struct dentry *olddentry;
++ struct dentry *newdentry;
++ struct dentry *upperdir;
++ struct inode *newinode;
++
++ err = ovl_copy_up(old);
++ if (err)
++ goto out;
++
++ err = ovl_copy_up(new->d_parent);
++ if (err)
++ goto out;
++
++ upperdir = ovl_dentry_upper(new->d_parent);
++ mutex_lock_nested(&upperdir->d_inode->i_mutex, I_MUTEX_PARENT);
++ newdentry = ovl_lookup_create(upperdir, new);
++ err = PTR_ERR(newdentry);
++ if (IS_ERR(newdentry))
++ goto out_unlock;
++
++ olddentry = ovl_dentry_upper(old);
++ err = vfs_link(olddentry, upperdir->d_inode, newdentry);
++ if (!err) {
++ if (WARN_ON(!newdentry->d_inode)) {
++ dput(newdentry);
++ err = -ENOENT;
++ goto out_unlock;
++ }
++ newinode = ovl_new_inode(old->d_sb, newdentry->d_inode->i_mode,
++ new->d_fsdata);
++ if (!newinode)
++ goto link_fail;
++ ovl_copyattr(upperdir->d_inode, newinode);
++
++ ovl_dentry_version_inc(new->d_parent);
++ ovl_dentry_update(new, newdentry);
++
++ d_instantiate(new, newinode);
++ } else {
++link_fail:
++ if (ovl_dentry_is_opaque(new))
++ ovl_whiteout(upperdir, new);
++ dput(newdentry);
++ }
++out_unlock:
++ mutex_unlock(&upperdir->d_inode->i_mutex);
++out:
++ return err;
++
++}
++
++static int ovl_rename(struct inode *olddir, struct dentry *old,
++ struct inode *newdir, struct dentry *new)
++{
++ int err;
++ enum ovl_path_type old_type;
++ enum ovl_path_type new_type;
++ struct dentry *old_upperdir;
++ struct dentry *new_upperdir;
++ struct dentry *olddentry;
++ struct dentry *newdentry;
++ struct dentry *trap;
++ bool old_opaque;
++ bool new_opaque;
++ bool new_create = false;
++ bool is_dir = S_ISDIR(old->d_inode->i_mode);
++
++ /* Don't copy up directory trees */
++ old_type = ovl_path_type(old);
++ if (old_type != OVL_PATH_UPPER && is_dir)
++ return -EXDEV;
++
++ if (new->d_inode) {
++ new_type = ovl_path_type(new);
++
++ if (new_type == OVL_PATH_LOWER && old_type == OVL_PATH_LOWER) {
++ if (ovl_dentry_lower(old)->d_inode ==
++ ovl_dentry_lower(new)->d_inode)
++ return 0;
++ }
++ if (new_type != OVL_PATH_LOWER && old_type != OVL_PATH_LOWER) {
++ if (ovl_dentry_upper(old)->d_inode ==
++ ovl_dentry_upper(new)->d_inode)
++ return 0;
++ }
++
++ if (new_type != OVL_PATH_UPPER &&
++ S_ISDIR(new->d_inode->i_mode)) {
++ err = ovl_check_empty_and_clear(new, new_type);
++ if (err)
++ return err;
++ }
++ } else {
++ new_type = OVL_PATH_UPPER;
++ }
++
++ err = ovl_copy_up(old);
++ if (err)
++ return err;
++
++ err = ovl_copy_up(new->d_parent);
++ if (err)
++ return err;
++
++ old_upperdir = ovl_dentry_upper(old->d_parent);
++ new_upperdir = ovl_dentry_upper(new->d_parent);
++
++ trap = lock_rename(new_upperdir, old_upperdir);
++
++ olddentry = ovl_dentry_upper(old);
++ newdentry = ovl_dentry_upper(new);
++ if (newdentry) {
++ dget(newdentry);
++ } else {
++ new_create = true;
++ newdentry = ovl_lookup_create(new_upperdir, new);
++ err = PTR_ERR(newdentry);
++ if (IS_ERR(newdentry))
++ goto out_unlock;
++ }
++
++ err = -ESTALE;
++ if (olddentry->d_parent != old_upperdir)
++ goto out_dput;
++ if (newdentry->d_parent != new_upperdir)
++ goto out_dput;
++ if (olddentry == trap)
++ goto out_dput;
++ if (newdentry == trap)
++ goto out_dput;
++
++ old_opaque = ovl_dentry_is_opaque(old);
++ new_opaque = ovl_dentry_is_opaque(new) || new_type != OVL_PATH_UPPER;
++
++ if (is_dir && !old_opaque && new_opaque) {
++ err = ovl_set_opaque(olddentry);
++ if (err)
++ goto out_dput;
++ }
++
++ err = vfs_rename(old_upperdir->d_inode, olddentry,
++ new_upperdir->d_inode, newdentry);
++
++ if (err) {
++ if (new_create && ovl_dentry_is_opaque(new))
++ ovl_whiteout(new_upperdir, new);
++ if (is_dir && !old_opaque && new_opaque)
++ ovl_remove_opaque(olddentry);
++ goto out_dput;
++ }
++
++ if (old_type != OVL_PATH_UPPER || old_opaque)
++ err = ovl_whiteout(old_upperdir, old);
++ if (is_dir && old_opaque && !new_opaque)
++ ovl_remove_opaque(olddentry);
++
++ if (old_opaque != new_opaque)
++ ovl_dentry_set_opaque(old, new_opaque);
++
++ ovl_dentry_version_inc(old->d_parent);
++ ovl_dentry_version_inc(new->d_parent);
++
++out_dput:
++ dput(newdentry);
++out_unlock:
++ unlock_rename(new_upperdir, old_upperdir);
++ return err;
++}
++
++const struct inode_operations ovl_dir_inode_operations = {
++ .lookup = ovl_lookup,
++ .mkdir = ovl_mkdir,
++ .symlink = ovl_symlink,
++ .unlink = ovl_unlink,
++ .rmdir = ovl_rmdir,
++ .rename = ovl_rename,
++ .link = ovl_link,
++ .setattr = ovl_setattr,
++ .create = ovl_create,
++ .mknod = ovl_mknod,
++ .permission = ovl_permission,
++ .getattr = ovl_dir_getattr,
++ .setxattr = ovl_setxattr,
++ .getxattr = ovl_getxattr,
++ .listxattr = ovl_listxattr,
++ .removexattr = ovl_removexattr,
++};
+--- /dev/null
++++ b/fs/overlayfs/inode.c
+@@ -0,0 +1,372 @@
++/*
++ *
++ * Copyright (C) 2011 Novell Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ */
++
++#include <linux/fs.h>
++#include <linux/slab.h>
++#include <linux/xattr.h>
++#include "overlayfs.h"
++
++int ovl_setattr(struct dentry *dentry, struct iattr *attr)
++{
++ struct dentry *upperdentry;
++ int err;
++
++ if ((attr->ia_valid & ATTR_SIZE) && !ovl_dentry_upper(dentry))
++ err = ovl_copy_up_truncate(dentry, attr->ia_size);
++ else
++ err = ovl_copy_up(dentry);
++ if (err)
++ return err;
++
++ upperdentry = ovl_dentry_upper(dentry);
++
++ if (attr->ia_valid & (ATTR_KILL_SUID|ATTR_KILL_SGID))
++ attr->ia_valid &= ~ATTR_MODE;
++
++ mutex_lock(&upperdentry->d_inode->i_mutex);
++ err = notify_change(upperdentry, attr);
++ if (!err)
++ ovl_copyattr(upperdentry->d_inode, dentry->d_inode);
++ mutex_unlock(&upperdentry->d_inode->i_mutex);
++
++ return err;
++}
++
++static int ovl_getattr(struct vfsmount *mnt, struct dentry *dentry,
++ struct kstat *stat)
++{
++ struct path realpath;
++
++ ovl_path_real(dentry, &realpath);
++ return vfs_getattr(realpath.mnt, realpath.dentry, stat);
++}
++
++int ovl_permission(struct inode *inode, int mask)
++{
++ struct ovl_entry *oe;
++ struct dentry *alias = NULL;
++ struct inode *realinode;
++ struct dentry *realdentry;
++ bool is_upper;
++ int err;
++
++ if (S_ISDIR(inode->i_mode)) {
++ oe = inode->i_private;
++ } else if (mask & MAY_NOT_BLOCK) {
++ return -ECHILD;
++ } else {
++ /*
++ * For non-directories find an alias and get the info
++ * from there.
++ */
++ alias = d_find_any_alias(inode);
++ if (WARN_ON(!alias))
++ return -ENOENT;
++
++ oe = alias->d_fsdata;
++ }
++
++ realdentry = ovl_entry_real(oe, &is_upper);
++
++ /* Careful in RCU walk mode */
++ realinode = ACCESS_ONCE(realdentry->d_inode);
++ if (!realinode) {
++ WARN_ON(!(mask & MAY_NOT_BLOCK));
++ err = -ENOENT;
++ goto out_dput;
++ }
++
++ if (mask & MAY_WRITE) {
++ umode_t mode = realinode->i_mode;
++
++ /*
++ * Writes will always be redirected to upper layer, so
++ * ignore lower layer being read-only.
++ *
++ * If the overlay itself is read-only then proceed
++ * with the permission check, don't return EROFS.
++ * This will only happen if this is the lower layer of
++ * another overlayfs.
++ *
++ * If upper fs becomes read-only after the overlay was
++ * constructed return EROFS to prevent modification of
++ * upper layer.
++ */
++ err = -EROFS;
++ if (is_upper && !IS_RDONLY(inode) && IS_RDONLY(realinode) &&
++ (S_ISREG(mode) || S_ISDIR(mode) || S_ISLNK(mode)))
++ goto out_dput;
++ }
++
++ err = __inode_permission(realinode, mask);
++out_dput:
++ dput(alias);
++ return err;
++}
++
++
++struct ovl_link_data {
++ struct dentry *realdentry;
++ void *cookie;
++};
++
++static void *ovl_follow_link(struct dentry *dentry, struct nameidata *nd)
++{
++ void *ret;
++ struct dentry *realdentry;
++ struct inode *realinode;
++
++ realdentry = ovl_dentry_real(dentry);
++ realinode = realdentry->d_inode;
++
++ if (WARN_ON(!realinode->i_op->follow_link))
++ return ERR_PTR(-EPERM);
++
++ ret = realinode->i_op->follow_link(realdentry, nd);
++ if (IS_ERR(ret))
++ return ret;
++
++ if (realinode->i_op->put_link) {
++ struct ovl_link_data *data;
++
++ data = kmalloc(sizeof(struct ovl_link_data), GFP_KERNEL);
++ if (!data) {
++ realinode->i_op->put_link(realdentry, nd, ret);
++ return ERR_PTR(-ENOMEM);
++ }
++ data->realdentry = realdentry;
++ data->cookie = ret;
++
++ return data;
++ } else {
++ return NULL;
++ }
++}
++
++static void ovl_put_link(struct dentry *dentry, struct nameidata *nd, void *c)
++{
++ struct inode *realinode;
++ struct ovl_link_data *data = c;
++
++ if (!data)
++ return;
++
++ realinode = data->realdentry->d_inode;
++ realinode->i_op->put_link(data->realdentry, nd, data->cookie);
++ kfree(data);
++}
++
++static int ovl_readlink(struct dentry *dentry, char __user *buf, int bufsiz)
++{
++ struct path realpath;
++ struct inode *realinode;
++
++ ovl_path_real(dentry, &realpath);
++ realinode = realpath.dentry->d_inode;
++
++ if (!realinode->i_op->readlink)
++ return -EINVAL;
++
++ touch_atime(&realpath);
++
++ return realinode->i_op->readlink(realpath.dentry, buf, bufsiz);
++}
++
++
++static bool ovl_is_private_xattr(const char *name)
++{
++ return strncmp(name, "trusted.overlay.", 14) == 0;
++}
++
++int ovl_setxattr(struct dentry *dentry, const char *name,
++ const void *value, size_t size, int flags)
++{
++ int err;
++ struct dentry *upperdentry;
++
++ if (ovl_is_private_xattr(name))
++ return -EPERM;
++
++ err = ovl_copy_up(dentry);
++ if (err)
++ return err;
++
++ upperdentry = ovl_dentry_upper(dentry);
++ return vfs_setxattr(upperdentry, name, value, size, flags);
++}
++
++ssize_t ovl_getxattr(struct dentry *dentry, const char *name,
++ void *value, size_t size)
++{
++ if (ovl_path_type(dentry->d_parent) == OVL_PATH_MERGE &&
++ ovl_is_private_xattr(name))
++ return -ENODATA;
++
++ return vfs_getxattr(ovl_dentry_real(dentry), name, value, size);
++}
++
++ssize_t ovl_listxattr(struct dentry *dentry, char *list, size_t size)
++{
++ ssize_t res;
++ int off;
++
++ res = vfs_listxattr(ovl_dentry_real(dentry), list, size);
++ if (res <= 0 || size == 0)
++ return res;
++
++ if (ovl_path_type(dentry->d_parent) != OVL_PATH_MERGE)
++ return res;
++
++ /* filter out private xattrs */
++ for (off = 0; off < res;) {
++ char *s = list + off;
++ size_t slen = strlen(s) + 1;
++
++ BUG_ON(off + slen > res);
++
++ if (ovl_is_private_xattr(s)) {
++ res -= slen;
++ memmove(s, s + slen, res - off);
++ } else {
++ off += slen;
++ }
++ }
++
++ return res;
++}
++
++int ovl_removexattr(struct dentry *dentry, const char *name)
++{
++ int err;
++ struct path realpath;
++ enum ovl_path_type type;
++
++ if (ovl_path_type(dentry->d_parent) == OVL_PATH_MERGE &&
++ ovl_is_private_xattr(name))
++ return -ENODATA;
++
++ type = ovl_path_real(dentry, &realpath);
++ if (type == OVL_PATH_LOWER) {
++ err = vfs_getxattr(realpath.dentry, name, NULL, 0);
++ if (err < 0)
++ return err;
++
++ err = ovl_copy_up(dentry);
++ if (err)
++ return err;
++
++ ovl_path_upper(dentry, &realpath);
++ }
++
++ return vfs_removexattr(realpath.dentry, name);
++}
++
++static bool ovl_open_need_copy_up(int flags, enum ovl_path_type type,
++ struct dentry *realdentry)
++{
++ if (type != OVL_PATH_LOWER)
++ return false;
++
++ if (special_file(realdentry->d_inode->i_mode))
++ return false;
++
++ if (!(OPEN_FMODE(flags) & FMODE_WRITE) && !(flags & O_TRUNC))
++ return false;
++
++ return true;
++}
++
++static int ovl_dentry_open(struct dentry *dentry, struct file *file,
++ const struct cred *cred)
++{
++ int err;
++ struct path realpath;
++ enum ovl_path_type type;
++
++ type = ovl_path_real(dentry, &realpath);
++ if (ovl_open_need_copy_up(file->f_flags, type, realpath.dentry)) {
++ if (file->f_flags & O_TRUNC)
++ err = ovl_copy_up_truncate(dentry, 0);
++ else
++ err = ovl_copy_up(dentry);
++ if (err)
++ return err;
++
++ ovl_path_upper(dentry, &realpath);
++ }
++
++ return vfs_open(&realpath, file, cred);
++}
++
++static const struct inode_operations ovl_file_inode_operations = {
++ .setattr = ovl_setattr,
++ .permission = ovl_permission,
++ .getattr = ovl_getattr,
++ .setxattr = ovl_setxattr,
++ .getxattr = ovl_getxattr,
++ .listxattr = ovl_listxattr,
++ .removexattr = ovl_removexattr,
++ .dentry_open = ovl_dentry_open,
++};
++
++static const struct inode_operations ovl_symlink_inode_operations = {
++ .setattr = ovl_setattr,
++ .follow_link = ovl_follow_link,
++ .put_link = ovl_put_link,
++ .readlink = ovl_readlink,
++ .getattr = ovl_getattr,
++ .setxattr = ovl_setxattr,
++ .getxattr = ovl_getxattr,
++ .listxattr = ovl_listxattr,
++ .removexattr = ovl_removexattr,
++};
++
++struct inode *ovl_new_inode(struct super_block *sb, umode_t mode,
++ struct ovl_entry *oe)
++{
++ struct inode *inode;
++
++ inode = new_inode(sb);
++ if (!inode)
++ return NULL;
++
++ mode &= S_IFMT;
++
++ inode->i_ino = get_next_ino();
++ inode->i_mode = mode;
++ inode->i_flags |= S_NOATIME | S_NOCMTIME;
++
++ switch (mode) {
++ case S_IFDIR:
++ inode->i_private = oe;
++ inode->i_op = &ovl_dir_inode_operations;
++ inode->i_fop = &ovl_dir_operations;
++ break;
++
++ case S_IFLNK:
++ inode->i_op = &ovl_symlink_inode_operations;
++ break;
++
++ case S_IFREG:
++ case S_IFSOCK:
++ case S_IFBLK:
++ case S_IFCHR:
++ case S_IFIFO:
++ inode->i_op = &ovl_file_inode_operations;
++ break;
++
++ default:
++ WARN(1, "illegal file type: %i\n", mode);
++ iput(inode);
++ inode = NULL;
++ }
++
++ return inode;
++
++}
+--- /dev/null
++++ b/fs/overlayfs/Kconfig
+@@ -0,0 +1,4 @@
++config OVERLAYFS_FS
++ tristate "Overlay filesystem support"
++ help
++ Add support for overlay filesystem.
+--- /dev/null
++++ b/fs/overlayfs/Makefile
+@@ -0,0 +1,7 @@
++#
++# Makefile for the overlay filesystem.
++#
++
++obj-$(CONFIG_OVERLAYFS_FS) += overlayfs.o
++
++overlayfs-objs := super.o inode.o dir.o readdir.o copy_up.o
+--- /dev/null
++++ b/fs/overlayfs/overlayfs.h
+@@ -0,0 +1,70 @@
++/*
++ *
++ * Copyright (C) 2011 Novell Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ */
++
++struct ovl_entry;
++
++enum ovl_path_type {
++ OVL_PATH_UPPER,
++ OVL_PATH_MERGE,
++ OVL_PATH_LOWER,
++};
++
++extern const char *ovl_opaque_xattr;
++extern const char *ovl_whiteout_xattr;
++extern const struct dentry_operations ovl_dentry_operations;
++
++enum ovl_path_type ovl_path_type(struct dentry *dentry);
++u64 ovl_dentry_version_get(struct dentry *dentry);
++void ovl_dentry_version_inc(struct dentry *dentry);
++void ovl_path_upper(struct dentry *dentry, struct path *path);
++void ovl_path_lower(struct dentry *dentry, struct path *path);
++enum ovl_path_type ovl_path_real(struct dentry *dentry, struct path *path);
++struct dentry *ovl_dentry_upper(struct dentry *dentry);
++struct dentry *ovl_dentry_lower(struct dentry *dentry);
++struct dentry *ovl_dentry_real(struct dentry *dentry);
++struct dentry *ovl_entry_real(struct ovl_entry *oe, bool *is_upper);
++bool ovl_dentry_is_opaque(struct dentry *dentry);
++void ovl_dentry_set_opaque(struct dentry *dentry, bool opaque);
++bool ovl_is_whiteout(struct dentry *dentry);
++void ovl_dentry_update(struct dentry *dentry, struct dentry *upperdentry);
++struct dentry *ovl_lookup(struct inode *dir, struct dentry *dentry,
++ unsigned int flags);
++struct file *ovl_path_open(struct path *path, int flags);
++
++struct dentry *ovl_upper_create(struct dentry *upperdir, struct dentry *dentry,
++ struct kstat *stat, const char *link);
++
++/* readdir.c */
++extern const struct file_operations ovl_dir_operations;
++int ovl_check_empty_and_clear(struct dentry *dentry, enum ovl_path_type type);
++
++/* inode.c */
++int ovl_setattr(struct dentry *dentry, struct iattr *attr);
++int ovl_permission(struct inode *inode, int mask);
++int ovl_setxattr(struct dentry *dentry, const char *name,
++ const void *value, size_t size, int flags);
++ssize_t ovl_getxattr(struct dentry *dentry, const char *name,
++ void *value, size_t size);
++ssize_t ovl_listxattr(struct dentry *dentry, char *list, size_t size);
++int ovl_removexattr(struct dentry *dentry, const char *name);
++
++struct inode *ovl_new_inode(struct super_block *sb, umode_t mode,
++ struct ovl_entry *oe);
++static inline void ovl_copyattr(struct inode *from, struct inode *to)
++{
++ to->i_uid = from->i_uid;
++ to->i_gid = from->i_gid;
++}
++
++/* dir.c */
++extern const struct inode_operations ovl_dir_inode_operations;
++
++/* copy_up.c */
++int ovl_copy_up(struct dentry *dentry);
++int ovl_copy_up_truncate(struct dentry *dentry, loff_t size);
+--- /dev/null
++++ b/fs/overlayfs/readdir.c
+@@ -0,0 +1,566 @@
++/*
++ *
++ * Copyright (C) 2011 Novell Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ */
++
++#include <linux/fs.h>
++#include <linux/slab.h>
++#include <linux/namei.h>
++#include <linux/file.h>
++#include <linux/xattr.h>
++#include <linux/rbtree.h>
++#include <linux/security.h>
++#include <linux/cred.h>
++#include "overlayfs.h"
++
++struct ovl_cache_entry {
++ const char *name;
++ unsigned int len;
++ unsigned int type;
++ u64 ino;
++ bool is_whiteout;
++ struct list_head l_node;
++ struct rb_node node;
++};
++
++struct ovl_readdir_data {
++ struct rb_root *root;
++ struct list_head *list;
++ struct list_head *middle;
++ struct dentry *dir;
++ int count;
++ int err;
++};
++
++struct ovl_dir_file {
++ bool is_real;
++ bool is_cached;
++ struct list_head cursor;
++ u64 cache_version;
++ struct list_head cache;
++ struct file *realfile;
++};
++
++static struct ovl_cache_entry *ovl_cache_entry_from_node(struct rb_node *n)
++{
++ return container_of(n, struct ovl_cache_entry, node);
++}
++
++static struct ovl_cache_entry *ovl_cache_entry_find(struct rb_root *root,
++ const char *name, int len)
++{
++ struct rb_node *node = root->rb_node;
++ int cmp;
++
++ while (node) {
++ struct ovl_cache_entry *p = ovl_cache_entry_from_node(node);
++
++ cmp = strncmp(name, p->name, len);
++ if (cmp > 0)
++ node = p->node.rb_right;
++ else if (cmp < 0 || len < p->len)
++ node = p->node.rb_left;
++ else
++ return p;
++ }
++
++ return NULL;
++}
++
++static struct ovl_cache_entry *ovl_cache_entry_new(const char *name, int len,
++ u64 ino, unsigned int d_type)
++{
++ struct ovl_cache_entry *p;
++
++ p = kmalloc(sizeof(*p) + len + 1, GFP_KERNEL);
++ if (p) {
++ char *name_copy = (char *) (p + 1);
++ memcpy(name_copy, name, len);
++ name_copy[len] = '\0';
++ p->name = name_copy;
++ p->len = len;
++ p->type = d_type;
++ p->ino = ino;
++ p->is_whiteout = false;
++ }
++
++ return p;
++}
++
++static int ovl_cache_entry_add_rb(struct ovl_readdir_data *rdd,
++ const char *name, int len, u64 ino,
++ unsigned int d_type)
++{
++ struct rb_node **newp = &rdd->root->rb_node;
++ struct rb_node *parent = NULL;
++ struct ovl_cache_entry *p;
++
++ while (*newp) {
++ int cmp;
++ struct ovl_cache_entry *tmp;
++
++ parent = *newp;
++ tmp = ovl_cache_entry_from_node(*newp);
++ cmp = strncmp(name, tmp->name, len);
++ if (cmp > 0)
++ newp = &tmp->node.rb_right;
++ else if (cmp < 0 || len < tmp->len)
++ newp = &tmp->node.rb_left;
++ else
++ return 0;
++ }
++
++ p = ovl_cache_entry_new(name, len, ino, d_type);
++ if (p == NULL)
++ return -ENOMEM;
++
++ list_add_tail(&p->l_node, rdd->list);
++ rb_link_node(&p->node, parent, newp);
++ rb_insert_color(&p->node, rdd->root);
++
++ return 0;
++}
++
++static int ovl_fill_lower(void *buf, const char *name, int namelen,
++ loff_t offset, u64 ino, unsigned int d_type)
++{
++ struct ovl_readdir_data *rdd = buf;
++ struct ovl_cache_entry *p;
++
++ rdd->count++;
++ p = ovl_cache_entry_find(rdd->root, name, namelen);
++ if (p) {
++ list_move_tail(&p->l_node, rdd->middle);
++ } else {
++ p = ovl_cache_entry_new(name, namelen, ino, d_type);
++ if (p == NULL)
++ rdd->err = -ENOMEM;
++ else
++ list_add_tail(&p->l_node, rdd->middle);
++ }
++
++ return rdd->err;
++}
++
++static void ovl_cache_free(struct list_head *list)
++{
++ struct ovl_cache_entry *p;
++ struct ovl_cache_entry *n;
++
++ list_for_each_entry_safe(p, n, list, l_node)
++ kfree(p);
++
++ INIT_LIST_HEAD(list);
++}
++
++static int ovl_fill_upper(void *buf, const char *name, int namelen,
++ loff_t offset, u64 ino, unsigned int d_type)
++{
++ struct ovl_readdir_data *rdd = buf;
++
++ rdd->count++;
++ return ovl_cache_entry_add_rb(rdd, name, namelen, ino, d_type);
++}
++
++static inline int ovl_dir_read(struct path *realpath,
++ struct ovl_readdir_data *rdd, filldir_t filler)
++{
++ struct file *realfile;
++ int err;
++
++ realfile = ovl_path_open(realpath, O_RDONLY | O_DIRECTORY);
++ if (IS_ERR(realfile))
++ return PTR_ERR(realfile);
++
++ do {
++ rdd->count = 0;
++ rdd->err = 0;
++ err = vfs_readdir(realfile, filler, rdd);
++ if (err >= 0)
++ err = rdd->err;
++ } while (!err && rdd->count);
++ fput(realfile);
++
++ return 0;
++}
++
++static void ovl_dir_reset(struct file *file)
++{
++ struct ovl_dir_file *od = file->private_data;
++ enum ovl_path_type type = ovl_path_type(file->f_path.dentry);
++
++ if (ovl_dentry_version_get(file->f_path.dentry) != od->cache_version) {
++ list_del_init(&od->cursor);
++ ovl_cache_free(&od->cache);
++ od->is_cached = false;
++ }
++ WARN_ON(!od->is_real && type != OVL_PATH_MERGE);
++ if (od->is_real && type == OVL_PATH_MERGE) {
++ fput(od->realfile);
++ od->realfile = NULL;
++ od->is_real = false;
++ }
++}
++
++static int ovl_dir_mark_whiteouts(struct ovl_readdir_data *rdd)
++{
++ struct ovl_cache_entry *p;
++ struct dentry *dentry;
++ const struct cred *old_cred;
++ struct cred *override_cred;
++
++ override_cred = prepare_creds();
++ if (!override_cred) {
++ ovl_cache_free(rdd->list);
++ return -ENOMEM;
++ }
++
++ /*
++ * CAP_SYS_ADMIN for getxattr
++ * CAP_DAC_OVERRIDE for lookup
++ */
++ cap_raise(override_cred->cap_effective, CAP_SYS_ADMIN);
++ cap_raise(override_cred->cap_effective, CAP_DAC_OVERRIDE);
++ old_cred = override_creds(override_cred);
++
++ mutex_lock(&rdd->dir->d_inode->i_mutex);
++ list_for_each_entry(p, rdd->list, l_node) {
++ if (p->type != DT_LNK)
++ continue;
++
++ dentry = lookup_one_len(p->name, rdd->dir, p->len);
++ if (IS_ERR(dentry))
++ continue;
++
++ p->is_whiteout = ovl_is_whiteout(dentry);
++ dput(dentry);
++ }
++ mutex_unlock(&rdd->dir->d_inode->i_mutex);
++
++ revert_creds(old_cred);
++ put_cred(override_cred);
++
++ return 0;
++}
++
++static inline int ovl_dir_read_merged(struct path *upperpath,
++ struct path *lowerpath,
++ struct ovl_readdir_data *rdd)
++{
++ int err;
++ struct rb_root root = RB_ROOT;
++ struct list_head middle;
++
++ rdd->root = &root;
++ if (upperpath->dentry) {
++ rdd->dir = upperpath->dentry;
++ err = ovl_dir_read(upperpath, rdd, ovl_fill_upper);
++ if (err)
++ goto out;
++
++ err = ovl_dir_mark_whiteouts(rdd);
++ if (err)
++ goto out;
++ }
++ /*
++ * Insert lowerpath entries before upperpath ones, this allows
++ * offsets to be reasonably constant
++ */
++ list_add(&middle, rdd->list);
++ rdd->middle = &middle;
++ err = ovl_dir_read(lowerpath, rdd, ovl_fill_lower);
++ list_del(&middle);
++out:
++ rdd->root = NULL;
++
++ return err;
++}
++
++static void ovl_seek_cursor(struct ovl_dir_file *od, loff_t pos)
++{
++ struct list_head *l;
++ loff_t off;
++
++ l = od->cache.next;
++ for (off = 0; off < pos; off++) {
++ if (l == &od->cache)
++ break;
++ l = l->next;
++ }
++ list_move_tail(&od->cursor, l);
++}
++
++static int ovl_readdir(struct file *file, void *buf, filldir_t filler)
++{
++ struct ovl_dir_file *od = file->private_data;
++ int res;
++
++ if (!file->f_pos)
++ ovl_dir_reset(file);
++
++ if (od->is_real) {
++ res = vfs_readdir(od->realfile, filler, buf);
++ file->f_pos = od->realfile->f_pos;
++
++ return res;
++ }
++
++ if (!od->is_cached) {
++ struct path lowerpath;
++ struct path upperpath;
++ struct ovl_readdir_data rdd = { .list = &od->cache };
++
++ ovl_path_lower(file->f_path.dentry, &lowerpath);
++ ovl_path_upper(file->f_path.dentry, &upperpath);
++
++ res = ovl_dir_read_merged(&upperpath, &lowerpath, &rdd);
++ if (res) {
++ ovl_cache_free(rdd.list);
++ return res;
++ }
++
++ od->cache_version = ovl_dentry_version_get(file->f_path.dentry);
++ od->is_cached = true;
++
++ ovl_seek_cursor(od, file->f_pos);
++ }
++
++ while (od->cursor.next != &od->cache) {
++ int over;
++ loff_t off;
++ struct ovl_cache_entry *p;
++
++ p = list_entry(od->cursor.next, struct ovl_cache_entry, l_node);
++ off = file->f_pos;
++ if (!p->is_whiteout) {
++ over = filler(buf, p->name, p->len, off, p->ino,
++ p->type);
++ if (over)
++ break;
++ }
++ file->f_pos++;
++ list_move(&od->cursor, &p->l_node);
++ }
++
++ return 0;
++}
++
++static loff_t ovl_dir_llseek(struct file *file, loff_t offset, int origin)
++{
++ loff_t res;
++ struct ovl_dir_file *od = file->private_data;
++
++ mutex_lock(&file->f_dentry->d_inode->i_mutex);
++ if (!file->f_pos)
++ ovl_dir_reset(file);
++
++ if (od->is_real) {
++ res = vfs_llseek(od->realfile, offset, origin);
++ file->f_pos = od->realfile->f_pos;
++ } else {
++ res = -EINVAL;
++
++ switch (origin) {
++ case SEEK_CUR:
++ offset += file->f_pos;
++ break;
++ case SEEK_SET:
++ break;
++ default:
++ goto out_unlock;
++ }
++ if (offset < 0)
++ goto out_unlock;
++
++ if (offset != file->f_pos) {
++ file->f_pos = offset;
++ if (od->is_cached)
++ ovl_seek_cursor(od, offset);
++ }
++ res = offset;
++ }
++out_unlock:
++ mutex_unlock(&file->f_dentry->d_inode->i_mutex);
++
++ return res;
++}
++
++static int ovl_dir_fsync(struct file *file, loff_t start, loff_t end,
++ int datasync)
++{
++ struct ovl_dir_file *od = file->private_data;
++
++ /* May need to reopen directory if it got copied up */
++ if (!od->realfile) {
++ struct path upperpath;
++
++ ovl_path_upper(file->f_path.dentry, &upperpath);
++ od->realfile = ovl_path_open(&upperpath, O_RDONLY);
++ if (IS_ERR(od->realfile))
++ return PTR_ERR(od->realfile);
++ }
++
++ return vfs_fsync_range(od->realfile, start, end, datasync);
++}
++
++static int ovl_dir_release(struct inode *inode, struct file *file)
++{
++ struct ovl_dir_file *od = file->private_data;
++
++ list_del(&od->cursor);
++ ovl_cache_free(&od->cache);
++ if (od->realfile)
++ fput(od->realfile);
++ kfree(od);
++
++ return 0;
++}
++
++static int ovl_dir_open(struct inode *inode, struct file *file)
++{
++ struct path realpath;
++ struct file *realfile;
++ struct ovl_dir_file *od;
++ enum ovl_path_type type;
++
++ od = kzalloc(sizeof(struct ovl_dir_file), GFP_KERNEL);
++ if (!od)
++ return -ENOMEM;
++
++ type = ovl_path_real(file->f_path.dentry, &realpath);
++ realfile = ovl_path_open(&realpath, file->f_flags);
++ if (IS_ERR(realfile)) {
++ kfree(od);
++ return PTR_ERR(realfile);
++ }
++ INIT_LIST_HEAD(&od->cache);
++ INIT_LIST_HEAD(&od->cursor);
++ od->is_cached = false;
++ od->realfile = realfile;
++ od->is_real = (type != OVL_PATH_MERGE);
++ file->private_data = od;
++
++ return 0;
++}
++
++const struct file_operations ovl_dir_operations = {
++ .read = generic_read_dir,
++ .open = ovl_dir_open,
++ .readdir = ovl_readdir,
++ .llseek = ovl_dir_llseek,
++ .fsync = ovl_dir_fsync,
++ .release = ovl_dir_release,
++};
++
++static int ovl_check_empty_dir(struct dentry *dentry, struct list_head *list)
++{
++ int err;
++ struct path lowerpath;
++ struct path upperpath;
++ struct ovl_cache_entry *p;
++ struct ovl_readdir_data rdd = { .list = list };
++
++ ovl_path_upper(dentry, &upperpath);
++ ovl_path_lower(dentry, &lowerpath);
++
++ err = ovl_dir_read_merged(&upperpath, &lowerpath, &rdd);
++ if (err)
++ return err;
++
++ err = 0;
++
++ list_for_each_entry(p, list, l_node) {
++ if (p->is_whiteout)
++ continue;
++
++ if (p->name[0] == '.') {
++ if (p->len == 1)
++ continue;
++ if (p->len == 2 && p->name[1] == '.')
++ continue;
++ }
++ err = -ENOTEMPTY;
++ break;
++ }
++
++ return err;
++}
++
++static int ovl_remove_whiteouts(struct dentry *dir, struct list_head *list)
++{
++ struct path upperpath;
++ struct dentry *upperdir;
++ struct ovl_cache_entry *p;
++ const struct cred *old_cred;
++ struct cred *override_cred;
++ int err;
++
++ ovl_path_upper(dir, &upperpath);
++ upperdir = upperpath.dentry;
++
++ override_cred = prepare_creds();
++ if (!override_cred)
++ return -ENOMEM;
++
++ /*
++ * CAP_DAC_OVERRIDE for lookup and unlink
++ * CAP_SYS_ADMIN for setxattr of "trusted" namespace
++ * CAP_FOWNER for unlink in sticky directory
++ */
++ cap_raise(override_cred->cap_effective, CAP_DAC_OVERRIDE);
++ cap_raise(override_cred->cap_effective, CAP_SYS_ADMIN);
++ cap_raise(override_cred->cap_effective, CAP_FOWNER);
++ old_cred = override_creds(override_cred);
++
++ err = vfs_setxattr(upperdir, ovl_opaque_xattr, "y", 1, 0);
++ if (err)
++ goto out_revert_creds;
++
++ mutex_lock_nested(&upperdir->d_inode->i_mutex, I_MUTEX_PARENT);
++ list_for_each_entry(p, list, l_node) {
++ struct dentry *dentry;
++ int ret;
++
++ if (!p->is_whiteout)
++ continue;
++
++ dentry = lookup_one_len(p->name, upperdir, p->len);
++ if (IS_ERR(dentry)) {
++ printk(KERN_WARNING
++ "overlayfs: failed to lookup whiteout %.*s: %li\n",
++ p->len, p->name, PTR_ERR(dentry));
++ continue;
++ }
++ ret = vfs_unlink(upperdir->d_inode, dentry);
++ dput(dentry);
++ if (ret)
++ printk(KERN_WARNING
++ "overlayfs: failed to unlink whiteout %.*s: %i\n",
++ p->len, p->name, ret);
++ }
++ mutex_unlock(&upperdir->d_inode->i_mutex);
++
++out_revert_creds:
++ revert_creds(old_cred);
++ put_cred(override_cred);
++
++ return err;
++}
++
++int ovl_check_empty_and_clear(struct dentry *dentry, enum ovl_path_type type)
++{
++ int err;
++ LIST_HEAD(list);
++
++ err = ovl_check_empty_dir(dentry, &list);
++ if (!err && type == OVL_PATH_MERGE)
++ err = ovl_remove_whiteouts(dentry, &list);
++
++ ovl_cache_free(&list);
++
++ return err;
++}
+--- /dev/null
++++ b/fs/overlayfs/super.c
+@@ -0,0 +1,685 @@
++/*
++ *
++ * Copyright (C) 2011 Novell Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ */
++
++#include <linux/fs.h>
++#include <linux/namei.h>
++#include <linux/xattr.h>
++#include <linux/security.h>
++#include <linux/mount.h>
++#include <linux/slab.h>
++#include <linux/parser.h>
++#include <linux/module.h>
++#include <linux/cred.h>
++#include <linux/sched.h>
++#include <linux/statfs.h>
++#include <linux/seq_file.h>
++#include "overlayfs.h"
++
++MODULE_AUTHOR("Miklos Szeredi <miklos@szeredi.hu>");
++MODULE_DESCRIPTION("Overlay filesystem");
++MODULE_LICENSE("GPL");
++
++#define OVERLAYFS_SUPER_MAGIC 0x794c764f
++
++struct ovl_config {
++ char *lowerdir;
++ char *upperdir;
++};
++
++/* private information held for overlayfs's superblock */
++struct ovl_fs {
++ struct vfsmount *upper_mnt;
++ struct vfsmount *lower_mnt;
++ long lower_namelen;
++ /* pathnames of lower and upper dirs, for show_options */
++ struct ovl_config config;
++};
++
++/* private information held for every overlayfs dentry */
++struct ovl_entry {
++ /*
++ * Keep "double reference" on upper dentries, so that
++ * d_delete() doesn't think it's OK to reset d_inode to NULL.
++ */
++ struct dentry *__upperdentry;
++ struct dentry *lowerdentry;
++ union {
++ struct {
++ u64 version;
++ bool opaque;
++ };
++ struct rcu_head rcu;
++ };
++};
++
++const char *ovl_whiteout_xattr = "trusted.overlay.whiteout";
++const char *ovl_opaque_xattr = "trusted.overlay.opaque";
++
++
++enum ovl_path_type ovl_path_type(struct dentry *dentry)
++{
++ struct ovl_entry *oe = dentry->d_fsdata;
++
++ if (oe->__upperdentry) {
++ if (oe->lowerdentry && S_ISDIR(dentry->d_inode->i_mode))
++ return OVL_PATH_MERGE;
++ else
++ return OVL_PATH_UPPER;
++ } else {
++ return OVL_PATH_LOWER;
++ }
++}
++
++static struct dentry *ovl_upperdentry_dereference(struct ovl_entry *oe)
++{
++ struct dentry *upperdentry = ACCESS_ONCE(oe->__upperdentry);
++ smp_read_barrier_depends();
++ return upperdentry;
++}
++
++void ovl_path_upper(struct dentry *dentry, struct path *path)
++{
++ struct ovl_fs *ofs = dentry->d_sb->s_fs_info;
++ struct ovl_entry *oe = dentry->d_fsdata;
++
++ path->mnt = ofs->upper_mnt;
++ path->dentry = ovl_upperdentry_dereference(oe);
++}
++
++void ovl_path_lower(struct dentry *dentry, struct path *path)
++{
++ struct ovl_fs *ofs = dentry->d_sb->s_fs_info;
++ struct ovl_entry *oe = dentry->d_fsdata;
++
++ path->mnt = ofs->lower_mnt;
++ path->dentry = oe->lowerdentry;
++}
++
++enum ovl_path_type ovl_path_real(struct dentry *dentry, struct path *path)
++{
++
++ enum ovl_path_type type = ovl_path_type(dentry);
++
++ if (type == OVL_PATH_LOWER)
++ ovl_path_lower(dentry, path);
++ else
++ ovl_path_upper(dentry, path);
++
++ return type;
++}
++
++struct dentry *ovl_dentry_upper(struct dentry *dentry)
++{
++ struct ovl_entry *oe = dentry->d_fsdata;
++
++ return ovl_upperdentry_dereference(oe);
++}
++
++struct dentry *ovl_dentry_lower(struct dentry *dentry)
++{
++ struct ovl_entry *oe = dentry->d_fsdata;
++
++ return oe->lowerdentry;
++}
++
++struct dentry *ovl_dentry_real(struct dentry *dentry)
++{
++ struct ovl_entry *oe = dentry->d_fsdata;
++ struct dentry *realdentry;
++
++ realdentry = ovl_upperdentry_dereference(oe);
++ if (!realdentry)
++ realdentry = oe->lowerdentry;
++
++ return realdentry;
++}
++
++struct dentry *ovl_entry_real(struct ovl_entry *oe, bool *is_upper)
++{
++ struct dentry *realdentry;
++
++ realdentry = ovl_upperdentry_dereference(oe);
++ if (realdentry) {
++ *is_upper = true;
++ } else {
++ realdentry = oe->lowerdentry;
++ *is_upper = false;
++ }
++ return realdentry;
++}
++
++bool ovl_dentry_is_opaque(struct dentry *dentry)
++{
++ struct ovl_entry *oe = dentry->d_fsdata;
++ return oe->opaque;
++}
++
++void ovl_dentry_set_opaque(struct dentry *dentry, bool opaque)
++{
++ struct ovl_entry *oe = dentry->d_fsdata;
++ oe->opaque = opaque;
++}
++
++void ovl_dentry_update(struct dentry *dentry, struct dentry *upperdentry)
++{
++ struct ovl_entry *oe = dentry->d_fsdata;
++
++ WARN_ON(!mutex_is_locked(&upperdentry->d_parent->d_inode->i_mutex));
++ WARN_ON(oe->__upperdentry);
++ BUG_ON(!upperdentry->d_inode);
++ smp_wmb();
++ oe->__upperdentry = dget(upperdentry);
++}
++
++void ovl_dentry_version_inc(struct dentry *dentry)
++{
++ struct ovl_entry *oe = dentry->d_fsdata;
++
++ WARN_ON(!mutex_is_locked(&dentry->d_inode->i_mutex));
++ oe->version++;
++}
++
++u64 ovl_dentry_version_get(struct dentry *dentry)
++{
++ struct ovl_entry *oe = dentry->d_fsdata;
++
++ WARN_ON(!mutex_is_locked(&dentry->d_inode->i_mutex));
++ return oe->version;
++}
++
++bool ovl_is_whiteout(struct dentry *dentry)
++{
++ int res;
++ char val;
++
++ if (!dentry)
++ return false;
++ if (!dentry->d_inode)
++ return false;
++ if (!S_ISLNK(dentry->d_inode->i_mode))
++ return false;
++
++ res = vfs_getxattr(dentry, ovl_whiteout_xattr, &val, 1);
++ if (res == 1 && val == 'y')
++ return true;
++
++ return false;
++}
++
++static bool ovl_is_opaquedir(struct dentry *dentry)
++{
++ int res;
++ char val;
++
++ if (!S_ISDIR(dentry->d_inode->i_mode))
++ return false;
++
++ res = vfs_getxattr(dentry, ovl_opaque_xattr, &val, 1);
++ if (res == 1 && val == 'y')
++ return true;
++
++ return false;
++}
++
++static void ovl_entry_free(struct rcu_head *head)
++{
++ struct ovl_entry *oe = container_of(head, struct ovl_entry, rcu);
++ kfree(oe);
++}
++
++static void ovl_dentry_release(struct dentry *dentry)
++{
++ struct ovl_entry *oe = dentry->d_fsdata;
++
++ if (oe) {
++ dput(oe->__upperdentry);
++ dput(oe->__upperdentry);
++ dput(oe->lowerdentry);
++ call_rcu(&oe->rcu, ovl_entry_free);
++ }
++}
++
++const struct dentry_operations ovl_dentry_operations = {
++ .d_release = ovl_dentry_release,
++};
++
++static struct ovl_entry *ovl_alloc_entry(void)
++{
++ return kzalloc(sizeof(struct ovl_entry), GFP_KERNEL);
++}
++
++static inline struct dentry *ovl_lookup_real(struct dentry *dir,
++ struct qstr *name)
++{
++ struct dentry *dentry;
++
++ mutex_lock(&dir->d_inode->i_mutex);
++ dentry = lookup_one_len(name->name, dir, name->len);
++ mutex_unlock(&dir->d_inode->i_mutex);
++
++ if (IS_ERR(dentry)) {
++ if (PTR_ERR(dentry) == -ENOENT)
++ dentry = NULL;
++ } else if (!dentry->d_inode) {
++ dput(dentry);
++ dentry = NULL;
++ }
++ return dentry;
++}
++
++static int ovl_do_lookup(struct dentry *dentry)
++{
++ struct ovl_entry *oe;
++ struct dentry *upperdir;
++ struct dentry *lowerdir;
++ struct dentry *upperdentry = NULL;
++ struct dentry *lowerdentry = NULL;
++ struct inode *inode = NULL;
++ int err;
++
++ err = -ENOMEM;
++ oe = ovl_alloc_entry();
++ if (!oe)
++ goto out;
++
++ upperdir = ovl_dentry_upper(dentry->d_parent);
++ lowerdir = ovl_dentry_lower(dentry->d_parent);
++
++ if (upperdir) {
++ upperdentry = ovl_lookup_real(upperdir, &dentry->d_name);
++ err = PTR_ERR(upperdentry);
++ if (IS_ERR(upperdentry))
++ goto out_put_dir;
++
++ if (lowerdir && upperdentry &&
++ (S_ISLNK(upperdentry->d_inode->i_mode) ||
++ S_ISDIR(upperdentry->d_inode->i_mode))) {
++ const struct cred *old_cred;
++ struct cred *override_cred;
++
++ err = -ENOMEM;
++ override_cred = prepare_creds();
++ if (!override_cred)
++ goto out_dput_upper;
++
++ /* CAP_SYS_ADMIN needed for getxattr */
++ cap_raise(override_cred->cap_effective, CAP_SYS_ADMIN);
++ old_cred = override_creds(override_cred);
++
++ if (ovl_is_opaquedir(upperdentry)) {
++ oe->opaque = true;
++ } else if (ovl_is_whiteout(upperdentry)) {
++ dput(upperdentry);
++ upperdentry = NULL;
++ oe->opaque = true;
++ }
++ revert_creds(old_cred);
++ put_cred(override_cred);
++ }
++ }
++ if (lowerdir && !oe->opaque) {
++ lowerdentry = ovl_lookup_real(lowerdir, &dentry->d_name);
++ err = PTR_ERR(lowerdentry);
++ if (IS_ERR(lowerdentry))
++ goto out_dput_upper;
++ }
++
++ if (lowerdentry && upperdentry &&
++ (!S_ISDIR(upperdentry->d_inode->i_mode) ||
++ !S_ISDIR(lowerdentry->d_inode->i_mode))) {
++ dput(lowerdentry);
++ lowerdentry = NULL;
++ oe->opaque = true;
++ }
++
++ if (lowerdentry || upperdentry) {
++ struct dentry *realdentry;
++
++ realdentry = upperdentry ? upperdentry : lowerdentry;
++ err = -ENOMEM;
++ inode = ovl_new_inode(dentry->d_sb, realdentry->d_inode->i_mode,
++ oe);
++ if (!inode)
++ goto out_dput;
++ ovl_copyattr(realdentry->d_inode, inode);
++ }
++
++ if (upperdentry)
++ oe->__upperdentry = dget(upperdentry);
++
++ if (lowerdentry)
++ oe->lowerdentry = lowerdentry;
++
++ dentry->d_fsdata = oe;
++ dentry->d_op = &ovl_dentry_operations;
++ d_add(dentry, inode);
++
++ return 0;
++
++out_dput:
++ dput(lowerdentry);
++out_dput_upper:
++ dput(upperdentry);
++out_put_dir:
++ kfree(oe);
++out:
++ return err;
++}
++
++struct dentry *ovl_lookup(struct inode *dir, struct dentry *dentry,
++ unsigned int flags)
++{
++ int err = ovl_do_lookup(dentry);
++
++ if (err)
++ return ERR_PTR(err);
++
++ return NULL;
++}
++
++struct file *ovl_path_open(struct path *path, int flags)
++{
++ path_get(path);
++ return dentry_open(path, flags, current_cred());
++}
++
++static void ovl_put_super(struct super_block *sb)
++{
++ struct ovl_fs *ufs = sb->s_fs_info;
++
++ if (!(sb->s_flags & MS_RDONLY))
++ mnt_drop_write(ufs->upper_mnt);
++
++ mntput(ufs->upper_mnt);
++ mntput(ufs->lower_mnt);
++
++ kfree(ufs->config.lowerdir);
++ kfree(ufs->config.upperdir);
++ kfree(ufs);
++}
++
++static int ovl_remount_fs(struct super_block *sb, int *flagsp, char *data)
++{
++ int flags = *flagsp;
++ struct ovl_fs *ufs = sb->s_fs_info;
++
++ /* When remounting rw or ro, we need to adjust the write access to the
++ * upper fs.
++ */
++ if (((flags ^ sb->s_flags) & MS_RDONLY) == 0)
++ /* No change to readonly status */
++ return 0;
++
++ if (flags & MS_RDONLY) {
++ mnt_drop_write(ufs->upper_mnt);
++ return 0;
++ } else
++ return mnt_want_write(ufs->upper_mnt);
++}
++
++/**
++ * ovl_statfs
++ * @sb: The overlayfs super block
++ * @buf: The struct kstatfs to fill in with stats
++ *
++ * Get the filesystem statistics. As writes always target the upper layer
++ * filesystem pass the statfs to the same filesystem.
++ */
++static int ovl_statfs(struct dentry *dentry, struct kstatfs *buf)
++{
++ struct ovl_fs *ofs = dentry->d_sb->s_fs_info;
++ struct dentry *root_dentry = dentry->d_sb->s_root;
++ struct path path;
++ int err;
++
++ ovl_path_upper(root_dentry, &path);
++
++ err = vfs_statfs(&path, buf);
++ if (!err) {
++ buf->f_namelen = max(buf->f_namelen, ofs->lower_namelen);
++ buf->f_type = OVERLAYFS_SUPER_MAGIC;
++ }
++
++ return err;
++}
++
++/**
++ * ovl_show_options
++ *
++ * Prints the mount options for a given superblock.
++ * Returns zero; does not fail.
++ */
++static int ovl_show_options(struct seq_file *m, struct dentry *dentry)
++{
++ struct super_block *sb = dentry->d_sb;
++ struct ovl_fs *ufs = sb->s_fs_info;
++
++ seq_printf(m, ",lowerdir=%s", ufs->config.lowerdir);
++ seq_printf(m, ",upperdir=%s", ufs->config.upperdir);
++ return 0;
++}
++
++static const struct super_operations ovl_super_operations = {
++ .put_super = ovl_put_super,
++ .remount_fs = ovl_remount_fs,
++ .statfs = ovl_statfs,
++ .show_options = ovl_show_options,
++};
++
++enum {
++ Opt_lowerdir,
++ Opt_upperdir,
++ Opt_err,
++};
++
++static const match_table_t ovl_tokens = {
++ {Opt_lowerdir, "lowerdir=%s"},
++ {Opt_upperdir, "upperdir=%s"},
++ {Opt_err, NULL}
++};
++
++static int ovl_parse_opt(char *opt, struct ovl_config *config)
++{
++ char *p;
++
++ config->upperdir = NULL;
++ config->lowerdir = NULL;
++
++ while ((p = strsep(&opt, ",")) != NULL) {
++ int token;
++ substring_t args[MAX_OPT_ARGS];
++
++ if (!*p)
++ continue;
++
++ token = match_token(p, ovl_tokens, args);
++ switch (token) {
++ case Opt_upperdir:
++ kfree(config->upperdir);
++ config->upperdir = match_strdup(&args[0]);
++ if (!config->upperdir)
++ return -ENOMEM;
++ break;
++
++ case Opt_lowerdir:
++ kfree(config->lowerdir);
++ config->lowerdir = match_strdup(&args[0]);
++ if (!config->lowerdir)
++ return -ENOMEM;
++ break;
++
++ default:
++ return -EINVAL;
++ }
++ }
++ return 0;
++}
++
++static int ovl_fill_super(struct super_block *sb, void *data, int silent)
++{
++ struct path lowerpath;
++ struct path upperpath;
++ struct inode *root_inode;
++ struct dentry *root_dentry;
++ struct ovl_entry *oe;
++ struct ovl_fs *ufs;
++ struct kstatfs statfs;
++ int err;
++
++ err = -ENOMEM;
++ ufs = kmalloc(sizeof(struct ovl_fs), GFP_KERNEL);
++ if (!ufs)
++ goto out;
++
++ err = ovl_parse_opt((char *) data, &ufs->config);
++ if (err)
++ goto out_free_ufs;
++
++ err = -EINVAL;
++ if (!ufs->config.upperdir || !ufs->config.lowerdir) {
++ printk(KERN_ERR "overlayfs: missing upperdir or lowerdir\n");
++ goto out_free_config;
++ }
++
++ oe = ovl_alloc_entry();
++ if (oe == NULL)
++ goto out_free_config;
++
++ err = kern_path(ufs->config.upperdir, LOOKUP_FOLLOW, &upperpath);
++ if (err)
++ goto out_free_oe;
++
++ err = kern_path(ufs->config.lowerdir, LOOKUP_FOLLOW, &lowerpath);
++ if (err)
++ goto out_put_upperpath;
++
++ err = -ENOTDIR;
++ if (!S_ISDIR(upperpath.dentry->d_inode->i_mode) ||
++ !S_ISDIR(lowerpath.dentry->d_inode->i_mode))
++ goto out_put_lowerpath;
++
++ err = vfs_statfs(&lowerpath, &statfs);
++ if (err) {
++ printk(KERN_ERR "overlayfs: statfs failed on lowerpath\n");
++ goto out_put_lowerpath;
++ }
++ ufs->lower_namelen = statfs.f_namelen;
++
++ sb->s_stack_depth = max(upperpath.mnt->mnt_sb->s_stack_depth,
++ lowerpath.mnt->mnt_sb->s_stack_depth) + 1;
++
++ err = -EINVAL;
++ if (sb->s_stack_depth > FILESYSTEM_MAX_STACK_DEPTH) {
++ printk(KERN_ERR "overlayfs: maximum fs stacking depth exceeded\n");
++ goto out_put_lowerpath;
++ }
++
++
++ ufs->upper_mnt = clone_private_mount(&upperpath);
++ err = PTR_ERR(ufs->upper_mnt);
++ if (IS_ERR(ufs->upper_mnt)) {
++ printk(KERN_ERR "overlayfs: failed to clone upperpath\n");
++ goto out_put_lowerpath;
++ }
++
++ ufs->lower_mnt = clone_private_mount(&lowerpath);
++ err = PTR_ERR(ufs->lower_mnt);
++ if (IS_ERR(ufs->lower_mnt)) {
++ printk(KERN_ERR "overlayfs: failed to clone lowerpath\n");
++ goto out_put_upper_mnt;
++ }
++
++ /*
++ * Make lower_mnt R/O. That way fchmod/fchown on lower file
++ * will fail instead of modifying lower fs.
++ */
++ ufs->lower_mnt->mnt_flags |= MNT_READONLY;
++
++ /* If the upper fs is r/o, we mark overlayfs r/o too */
++ if (ufs->upper_mnt->mnt_sb->s_flags & MS_RDONLY)
++ sb->s_flags |= MS_RDONLY;
++
++ if (!(sb->s_flags & MS_RDONLY)) {
++ err = mnt_want_write(ufs->upper_mnt);
++ if (err)
++ goto out_put_lower_mnt;
++ }
++
++ err = -ENOMEM;
++ root_inode = ovl_new_inode(sb, S_IFDIR, oe);
++ if (!root_inode)
++ goto out_drop_write;
++
++ root_dentry = d_make_root(root_inode);
++ if (!root_dentry)
++ goto out_drop_write;
++
++ mntput(upperpath.mnt);
++ mntput(lowerpath.mnt);
++
++ oe->__upperdentry = dget(upperpath.dentry);
++ oe->lowerdentry = lowerpath.dentry;
++
++ root_dentry->d_fsdata = oe;
++ root_dentry->d_op = &ovl_dentry_operations;
++
++ sb->s_magic = OVERLAYFS_SUPER_MAGIC;
++ sb->s_op = &ovl_super_operations;
++ sb->s_root = root_dentry;
++ sb->s_fs_info = ufs;
++
++ return 0;
++
++out_drop_write:
++ if (!(sb->s_flags & MS_RDONLY))
++ mnt_drop_write(ufs->upper_mnt);
++out_put_lower_mnt:
++ mntput(ufs->lower_mnt);
++out_put_upper_mnt:
++ mntput(ufs->upper_mnt);
++out_put_lowerpath:
++ path_put(&lowerpath);
++out_put_upperpath:
++ path_put(&upperpath);
++out_free_oe:
++ kfree(oe);
++out_free_config:
++ kfree(ufs->config.lowerdir);
++ kfree(ufs->config.upperdir);
++out_free_ufs:
++ kfree(ufs);
++out:
++ return err;
++}
++
++static struct dentry *ovl_mount(struct file_system_type *fs_type, int flags,
++ const char *dev_name, void *raw_data)
++{
++ return mount_nodev(fs_type, flags, raw_data, ovl_fill_super);
++}
++
++static struct file_system_type ovl_fs_type = {
++ .owner = THIS_MODULE,
++ .name = "overlayfs",
++ .mount = ovl_mount,
++ .kill_sb = kill_anon_super,
++};
++
++static int __init ovl_init(void)
++{
++ return register_filesystem(&ovl_fs_type);
++}
++
++static void __exit ovl_exit(void)
++{
++ unregister_filesystem(&ovl_fs_type);
++}
++
++module_init(ovl_init);
++module_exit(ovl_exit);
+--- a/fs/splice.c
++++ b/fs/splice.c
+@@ -1308,6 +1308,7 @@ long do_splice_direct(struct file *in, l
+
+ return ret;
+ }
++EXPORT_SYMBOL(do_splice_direct);
+
+ static int splice_pipe_to_pipe(struct pipe_inode_info *ipipe,
+ struct pipe_inode_info *opipe,
+--- a/include/linux/fs.h
++++ b/include/linux/fs.h
+@@ -243,6 +243,12 @@ struct iattr {
+ */
+ #include <linux/quota.h>
+
++/*
++ * Maximum number of layers of fs stack. Needs to be limited to
++ * prevent kernel stack overflow
++ */
++#define FILESYSTEM_MAX_STACK_DEPTH 2
++
+ /**
+ * enum positive_aop_returns - aop return codes with specific semantics
+ *
+@@ -1321,6 +1327,11 @@ struct super_block {
+
+ /* Being remounted read-only */
+ int s_readonly_remount;
++
++ /*
++ * Indicates how deep in a filesystem stack this SB is
++ */
++ int s_stack_depth;
+ };
+
+ /* superblock cache pruning functions */
+@@ -1578,6 +1589,7 @@ struct inode_operations {
+ int (*atomic_open)(struct inode *, struct dentry *,
+ struct file *, unsigned open_flag,
+ umode_t create_mode, int *opened);
++ int (*dentry_open)(struct dentry *, struct file *, const struct cred *);
+ } ____cacheline_aligned;
+
+ struct seq_file;
+@@ -2009,6 +2021,7 @@ extern struct file *file_open_name(struc
+ extern struct file *filp_open(const char *, int, umode_t);
+ extern struct file *file_open_root(struct dentry *, struct vfsmount *,
+ const char *, int);
++extern int vfs_open(const struct path *, struct file *, const struct cred *);
+ extern struct file * dentry_open(const struct path *, int, const struct cred *);
+ extern int filp_close(struct file *, fl_owner_t id);
+
+@@ -2215,6 +2228,7 @@ extern sector_t bmap(struct inode *, sec
+ #endif
+ extern int notify_change(struct dentry *, struct iattr *);
+ extern int inode_permission(struct inode *, int);
++extern int __inode_permission(struct inode *, int);
+ extern int generic_permission(struct inode *, int);
+
+ static inline bool execute_ok(struct inode *inode)
+--- a/include/linux/mount.h
++++ b/include/linux/mount.h
+@@ -66,6 +66,9 @@ extern void mnt_pin(struct vfsmount *mnt
+ extern void mnt_unpin(struct vfsmount *mnt);
+ extern int __mnt_is_readonly(struct vfsmount *mnt);
+
++struct path;
++extern struct vfsmount *clone_private_mount(struct path *path);
++
+ struct file_system_type;
+ extern struct vfsmount *vfs_kern_mount(struct file_system_type *type,
+ int flags, const char *name,
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -5450,6 +5450,13 @@ F: drivers/scsi/osd/
+ F: include/scsi/osd_*
+ F: fs/exofs/
+
++OVERLAYFS FILESYSTEM
++M: Miklos Szeredi <miklos@szeredi.hu>
++L: linux-fsdevel@vger.kernel.org
++S: Supported
++F: fs/overlayfs/*
++F: Documentation/filesystems/overlayfs.txt
++
+ P54 WIRELESS DRIVER
+ M: Christian Lamparter <chunkeey@googlemail.com>
+ L: linux-wireless@vger.kernel.org
--- /dev/null
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -645,7 +645,7 @@ static int ehci_run (struct usb_hcd *hcd
+ "USB %x.%x started, EHCI %x.%02x%s\n",
+ ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
+ temp >> 8, temp & 0xff,
+- ignore_oc ? ", overcurrent ignored" : "");
++ (ignore_oc || ehci->ignore_oc) ? ", overcurrent ignored" : "");
+
+ ehci_writel(ehci, INTR_MASK,
+ &ehci->regs->intr_enable); /* Turn On Interrupts */
+--- a/drivers/usb/host/ehci-hub.c
++++ b/drivers/usb/host/ehci-hub.c
+@@ -585,7 +585,7 @@ ehci_hub_status_data (struct usb_hcd *hc
+ * always set, seem to clear PORT_OCC and PORT_CSC when writing to
+ * PORT_POWER; that's surprising, but maybe within-spec.
+ */
+- if (!ignore_oc)
++ if (!ignore_oc && !ehci->ignore_oc)
+ mask = PORT_CSC | PORT_PEC | PORT_OCC;
+ else
+ mask = PORT_CSC | PORT_PEC;
+@@ -804,7 +804,7 @@ static int ehci_hub_control (
+ if (temp & PORT_PEC)
+ status |= USB_PORT_STAT_C_ENABLE << 16;
+
+- if ((temp & PORT_OCC) && !ignore_oc){
++ if ((temp & PORT_OCC) && (!ignore_oc && !ehci->ignore_oc)){
+ status |= USB_PORT_STAT_C_OVERCURRENT << 16;
+
+ /*
+--- a/drivers/usb/host/ehci.h
++++ b/drivers/usb/host/ehci.h
+@@ -197,6 +197,7 @@ struct ehci_hcd { /* one per controlle
+ unsigned use_dummy_qh:1; /* AMD Frame List table quirk*/
+ unsigned has_synopsys_hc_bug:1; /* Synopsys HC */
+ unsigned frame_index_bug:1; /* MosChip (AKA NetMos) */
++ unsigned ignore_oc:1;
+
+ /* required for usb32 quirk */
+ #define OHCI_CTRL_HCFS (3 << 6)
--- /dev/null
+--- a/include/linux/mtd/physmap.h
++++ b/include/linux/mtd/physmap.h
+@@ -17,6 +17,7 @@
+
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
++#include <linux/platform_device.h>
+
+ struct map_info;
+ struct platform_device;
--- /dev/null
+--- a/scripts/setlocalversion
++++ b/scripts/setlocalversion
+@@ -167,7 +167,7 @@ else
+ # annotated or signed tagged state (as git describe only
+ # looks at signed or annotated tags - git tag -a/-s) and
+ # LOCALVERSION= is not specified
+- if test "${LOCALVERSION+set}" != "set"; then
++ if test "${CONFIG_LOCALVERSION+set}" != "set"; then
+ scm=$(scm_version --short)
+ res="$res${scm:++}"
+ fi
--- /dev/null
+--- a/Makefile
++++ b/Makefile
+@@ -570,9 +570,9 @@ endif # $(dot-config)
+ all: vmlinux
+
+ ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+-KBUILD_CFLAGS += -Os
++KBUILD_CFLAGS += -Os -fno-caller-saves
+ else
+-KBUILD_CFLAGS += -O2
++KBUILD_CFLAGS += -O2 -fno-reorder-blocks -fno-tree-ch -fno-caller-saves
+ endif
+
+ include $(srctree)/arch/$(SRCARCH)/Makefile
+@@ -645,6 +645,9 @@ endif
+ NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
+ CHECKFLAGS += $(NOSTDINC_FLAGS)
+
++# improve gcc optimization
++CFLAGS += $(call cc-option,-funit-at-a-time,)
++
+ # warn about C99 declaration after statement
+ KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
+
--- /dev/null
+--- a/Makefile
++++ b/Makefile
+@@ -379,7 +379,7 @@ KBUILD_CFLAGS_KERNEL :=
+ KBUILD_AFLAGS := -D__ASSEMBLY__
+ KBUILD_AFLAGS_MODULE := -DMODULE
+ KBUILD_CFLAGS_MODULE := -DMODULE
+-KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
++KBUILD_LDFLAGS_MODULE = -T $(srctree)/scripts/module-common.lds $(if $(CONFIG_PROFILING),,-s)
+
+ # Read KERNELRELEASE from include/config/kernel.release (if it exists)
+ KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
--- /dev/null
+--- a/scripts/kallsyms.c
++++ b/scripts/kallsyms.c
+@@ -22,6 +22,35 @@
+ #include <stdlib.h>
+ #include <string.h>
+ #include <ctype.h>
++#ifdef __APPLE__
++/* Darwin has no memmem implementation, this one is ripped of the uClibc-0.9.28 source */
++void *memmem (const void *haystack, size_t haystack_len,
++ const void *needle, size_t needle_len)
++{
++ const char *begin;
++ const char *const last_possible
++ = (const char *) haystack + haystack_len - needle_len;
++
++ if (needle_len == 0)
++ /* The first occurrence of the empty string is deemed to occur at
++ the beginning of the string. */
++ return (void *) haystack;
++
++ /* Sanity check, otherwise the loop might search through the whole
++ memory. */
++ if (__builtin_expect (haystack_len < needle_len, 0))
++ return NULL;
++
++ for (begin = (const char *) haystack; begin <= last_possible; ++begin)
++ if (begin[0] == ((const char *) needle)[0] &&
++ !memcmp ((const void *) &begin[1],
++ (const void *) ((const char *) needle + 1),
++ needle_len - 1))
++ return (void *) begin;
++
++ return NULL;
++}
++#endif
+
+ #ifndef ARRAY_SIZE
+ #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof(arr[0]))
+--- a/scripts/kconfig/Makefile
++++ b/scripts/kconfig/Makefile
+@@ -129,6 +129,9 @@ check-lxdialog := $(srctree)/$(src)/lxd
+ # we really need to do so. (Do not call gcc as part of make mrproper)
+ HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \
+ -DLOCALE
++ifeq ($(shell uname -s),Darwin)
++HOST_LOADLIBES += -lncurses
++endif
+
+ # ===========================================================================
+ # Shared Makefile for the various kconfig executables:
+--- a/scripts/mod/mk_elfconfig.c
++++ b/scripts/mod/mk_elfconfig.c
+@@ -1,7 +1,11 @@
+ #include <stdio.h>
+ #include <stdlib.h>
+ #include <string.h>
++#ifndef __APPLE__
+ #include <elf.h>
++#else
++#include "../../../../../tools/sstrip/include/elf.h"
++#endif
+
+ int
+ main(int argc, char **argv)
+--- a/scripts/mod/modpost.h
++++ b/scripts/mod/modpost.h
+@@ -7,7 +7,11 @@
+ #include <sys/mman.h>
+ #include <fcntl.h>
+ #include <unistd.h>
++#if !(defined(__APPLE__) || defined(__CYGWIN__))
+ #include <elf.h>
++#else
++#include "../../../../../tools/sstrip/include/elf.h"
++#endif
+
+ #include "elfconfig.h"
+
--- /dev/null
+--- a/tools/include/tools/be_byteshift.h
++++ b/tools/include/tools/be_byteshift.h
+@@ -1,7 +1,11 @@
+ #ifndef _TOOLS_BE_BYTESHIFT_H
+ #define _TOOLS_BE_BYTESHIFT_H
+
++#ifdef __linux__
+ #include <linux/types.h>
++#else
++#include "linux_types.h"
++#endif
+
+ static inline __u16 __get_unaligned_be16(const __u8 *p)
+ {
+--- a/tools/include/tools/le_byteshift.h
++++ b/tools/include/tools/le_byteshift.h
+@@ -1,7 +1,11 @@
+ #ifndef _TOOLS_LE_BYTESHIFT_H
+ #define _TOOLS_LE_BYTESHIFT_H
+
++#ifdef __linux__
+ #include <linux/types.h>
++#else
++#include "linux_types.h"
++#endif
+
+ static inline __u16 __get_unaligned_le16(const __u8 *p)
+ {
+--- /dev/null
++++ b/tools/include/tools/linux_types.h
+@@ -0,0 +1,22 @@
++#ifndef __LINUX_TYPES_H
++#define __LINUX_TYPES_H
++
++#include <stdint.h>
++
++typedef uint8_t __u8;
++typedef uint8_t __be8;
++typedef uint8_t __le8;
++
++typedef uint16_t __u16;
++typedef uint16_t __be16;
++typedef uint16_t __le16;
++
++typedef uint32_t __u32;
++typedef uint32_t __be32;
++typedef uint32_t __le32;
++
++typedef uint64_t __u64;
++typedef uint64_t __be64;
++typedef uint64_t __le64;
++
++#endif
--- /dev/null
+--- a/include/asm-generic/vmlinux.lds.h
++++ b/include/asm-generic/vmlinux.lds.h
+@@ -52,6 +52,27 @@
+ #define LOAD_OFFSET 0
+ #endif
+
++#ifndef SYMTAB_KEEP_STR
++#define SYMTAB_KEEP_STR *(__ksymtab_strings+*)
++#define SYMTAB_DISCARD_STR
++#else
++#define SYMTAB_DISCARD_STR *(__ksymtab_strings+*)
++#endif
++
++#ifndef SYMTAB_KEEP
++#define SYMTAB_KEEP *(SORT(___ksymtab+*))
++#define SYMTAB_DISCARD
++#else
++#define SYMTAB_DISCARD *(SORT(___ksymtab+*))
++#endif
++
++#ifndef SYMTAB_KEEP_GPL
++#define SYMTAB_KEEP_GPL *(SORT(___ksymtab_gpl+*))
++#define SYMTAB_DISCARD_GPL
++#else
++#define SYMTAB_DISCARD_GPL *(SORT(___ksymtab_gpl+*))
++#endif
++
+ #ifndef SYMBOL_PREFIX
+ #define VMLINUX_SYMBOL(sym) sym
+ #else
+@@ -276,14 +297,14 @@
+ /* Kernel symbol table: Normal symbols */ \
+ __ksymtab : AT(ADDR(__ksymtab) - LOAD_OFFSET) { \
+ VMLINUX_SYMBOL(__start___ksymtab) = .; \
+- *(SORT(___ksymtab+*)) \
++ SYMTAB_KEEP \
+ VMLINUX_SYMBOL(__stop___ksymtab) = .; \
+ } \
+ \
+ /* Kernel symbol table: GPL-only symbols */ \
+ __ksymtab_gpl : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) { \
+ VMLINUX_SYMBOL(__start___ksymtab_gpl) = .; \
+- *(SORT(___ksymtab_gpl+*)) \
++ SYMTAB_KEEP_GPL \
+ VMLINUX_SYMBOL(__stop___ksymtab_gpl) = .; \
+ } \
+ \
+@@ -345,7 +366,7 @@
+ \
+ /* Kernel symbol table: strings */ \
+ __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) { \
+- *(__ksymtab_strings) \
++ SYMTAB_KEEP_STR \
+ } \
+ \
+ /* __*init sections */ \
+@@ -679,6 +700,9 @@
+ EXIT_TEXT \
+ EXIT_DATA \
+ EXIT_CALL \
++ SYMTAB_DISCARD \
++ SYMTAB_DISCARD_GPL \
++ SYMTAB_DISCARD_STR \
+ *(.discard) \
+ *(.discard.*) \
+ }
+--- a/include/linux/export.h
++++ b/include/linux/export.h
+@@ -45,12 +45,19 @@ extern struct module __this_module;
+ #define __CRC_SYMBOL(sym, sec)
+ #endif
+
++#ifdef MODULE
++#define __EXPORT_SUFFIX(sym)
++#else
++#define __EXPORT_SUFFIX(sym) "+" #sym
++#endif
++
+ /* For every exported symbol, place a struct in the __ksymtab section */
+ #define __EXPORT_SYMBOL(sym, sec) \
+ extern typeof(sym) sym; \
+ __CRC_SYMBOL(sym, sec) \
+ static const char __kstrtab_##sym[] \
+- __attribute__((section("__ksymtab_strings"), aligned(1))) \
++ __attribute__((section("__ksymtab_strings" \
++ __EXPORT_SUFFIX(sym)), aligned(1))) \
+ = MODULE_SYMBOL_PREFIX #sym; \
+ static const struct kernel_symbol __ksymtab_##sym \
+ __used \
--- /dev/null
+--- a/scripts/Makefile.lib
++++ b/scripts/Makefile.lib
+@@ -296,7 +296,7 @@ cmd_bzip2 = (cat $(filter-out FORCE,$^)
+
+ quiet_cmd_lzma = LZMA $@
+ cmd_lzma = (cat $(filter-out FORCE,$^) | \
+- lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
++ lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ (rm -f $@ ; false)
+
+ quiet_cmd_lzo = LZO $@
+--- a/scripts/gen_initramfs_list.sh
++++ b/scripts/gen_initramfs_list.sh
+@@ -226,7 +226,7 @@ cpio_list=
+ output="/dev/stdout"
+ output_file=""
+ is_cpio_compressed=
+-compr="gzip -n -9 -f"
++compr="gzip -n -9 -f -"
+
+ arg="$1"
+ case "$arg" in
+@@ -240,9 +240,9 @@ case "$arg" in
+ output_file="$1"
+ cpio_list="$(mktemp ${TMPDIR:-/tmp}/cpiolist.XXXXXX)"
+ output=${cpio_list}
+- echo "$output_file" | grep -q "\.gz$" && compr="gzip -n -9 -f"
+- echo "$output_file" | grep -q "\.bz2$" && compr="bzip2 -9 -f"
+- echo "$output_file" | grep -q "\.lzma$" && compr="lzma -9 -f"
++ echo "$output_file" | grep -q "\.gz$" && compr="gzip -n -9 -f -"
++ echo "$output_file" | grep -q "\.bz2$" && compr="bzip2 -9 -f -"
++ echo "$output_file" | grep -q "\.lzma$" && compr="lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so"
+ echo "$output_file" | grep -q "\.xz$" && \
+ compr="xz --check=crc32 --lzma2=dict=1MiB"
+ echo "$output_file" | grep -q "\.lzo$" && compr="lzop -9 -f"
+@@ -303,7 +303,7 @@ if [ ! -z ${output_file} ]; then
+ if [ "${is_cpio_compressed}" = "compressed" ]; then
+ cat ${cpio_tfile} > ${output_file}
+ else
+- (cat ${cpio_tfile} | ${compr} - > ${output_file}) \
++ (cat ${cpio_tfile} | ${compr} > ${output_file}) \
+ || (rm -f ${output_file} ; false)
+ fi
+ [ -z ${cpio_file} ] && rm ${cpio_tfile}
+--- a/lib/decompress.c
++++ b/lib/decompress.c
+@@ -43,6 +43,7 @@ static const struct compress_format comp
+ { {037, 0236}, "gzip", gunzip },
+ { {0x42, 0x5a}, "bzip2", bunzip2 },
+ { {0x5d, 0x00}, "lzma", unlzma },
++ { {0x6d, 0x00}, "lzma-openwrt", unlzma },
+ { {0xfd, 0x37}, "xz", unxz },
+ { {0x89, 0x4c}, "lzo", unlzo },
+ { {0, 0}, NULL, NULL }
--- /dev/null
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -191,7 +191,6 @@ config NF_CONNTRACK_FTP
+
+ config NF_CONNTRACK_H323
+ tristate "H.323 protocol support"
+- depends on (IPV6 || IPV6=n)
+ depends on NETFILTER_ADVANCED
+ help
+ H.323 is a VoIP signalling protocol from ITU-T. As one of the most
+@@ -750,7 +749,6 @@ config NETFILTER_XT_TARGET_SECMARK
+
+ config NETFILTER_XT_TARGET_TCPMSS
+ tristate '"TCPMSS" target support'
+- depends on (IPV6 || IPV6=n)
+ default m if NETFILTER_ADVANCED=n
+ ---help---
+ This option adds a `TCPMSS' target, which allows you to alter the
--- /dev/null
+--- a/sound/core/Kconfig
++++ b/sound/core/Kconfig
+@@ -7,7 +7,7 @@ config SND_PCM
+ select SND_TIMER
+
+ config SND_HWDEP
+- tristate
++ tristate "Sound hardware support"
+
+ config SND_RAWMIDI
+ tristate
--- /dev/null
+--- a/drivers/crypto/Kconfig
++++ b/drivers/crypto/Kconfig
+@@ -164,6 +164,7 @@ config CRYPTO_DEV_MV_CESA
+ depends on PLAT_ORION
+ select CRYPTO_ALGAPI
+ select CRYPTO_AES
++ select CRYPTO_HASH2
+ select CRYPTO_BLKCIPHER2
+ select CRYPTO_HASH
+ help
--- /dev/null
+--- a/drivers/ssb/Kconfig
++++ b/drivers/ssb/Kconfig
+@@ -29,6 +29,7 @@ config SSB_SPROM
+ config SSB_BLOCKIO
+ bool
+ depends on SSB
++ default y
+
+ config SSB_PCIHOST_POSSIBLE
+ bool
+@@ -49,7 +50,7 @@ config SSB_PCIHOST
+ config SSB_B43_PCI_BRIDGE
+ bool
+ depends on SSB_PCIHOST
+- default n
++ default y
+
+ config SSB_PCMCIAHOST_POSSIBLE
+ bool
+--- a/drivers/bcma/Kconfig
++++ b/drivers/bcma/Kconfig
+@@ -17,6 +17,7 @@ config BCMA
+ config BCMA_BLOCKIO
+ bool
+ depends on BCMA
++ default y
+
+ config BCMA_HOST_PCI_POSSIBLE
+ bool
--- /dev/null
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -277,16 +277,16 @@ config BCH_CONST_T
+ # Textsearch support is select'ed if needed
+ #
+ config TEXTSEARCH
+- boolean
++ boolean "Textsearch support"
+
+ config TEXTSEARCH_KMP
+- tristate
++ tristate "Textsearch KMP"
+
+ config TEXTSEARCH_BM
+- tristate
++ tristate "Textsearch BM"
+
+ config TEXTSEARCH_FSM
+- tristate
++ tristate "Textsearch FSM"
+
+ config BTREE
+ boolean
--- /dev/null
+--- a/net/wireless/Kconfig
++++ b/net/wireless/Kconfig
+@@ -150,13 +150,13 @@ config LIB80211
+ you want this built into your kernel.
+
+ config LIB80211_CRYPT_WEP
+- tristate
++ tristate "LIB80211_CRYPT_WEP"
+
+ config LIB80211_CRYPT_CCMP
+- tristate
++ tristate "LIB80211_CRYPT_CCMP"
+
+ config LIB80211_CRYPT_TKIP
+- tristate
++ tristate "LIB80211_CRYPT_TKIP"
+
+ config LIB80211_DEBUG
+ bool "lib80211 debugging messages"
--- /dev/null
+--- a/crypto/Kconfig
++++ b/crypto/Kconfig
+@@ -31,7 +31,7 @@ config CRYPTO_FIPS
+ this is.
+
+ config CRYPTO_ALGAPI
+- tristate
++ tristate "ALGAPI"
+ select CRYPTO_ALGAPI2
+ help
+ This option provides the API for cryptographic algorithms.
+@@ -40,7 +40,7 @@ config CRYPTO_ALGAPI2
+ tristate
+
+ config CRYPTO_AEAD
+- tristate
++ tristate "AEAD"
+ select CRYPTO_AEAD2
+ select CRYPTO_ALGAPI
+
+@@ -49,7 +49,7 @@ config CRYPTO_AEAD2
+ select CRYPTO_ALGAPI2
+
+ config CRYPTO_BLKCIPHER
+- tristate
++ tristate "BLKCIPHER"
+ select CRYPTO_BLKCIPHER2
+ select CRYPTO_ALGAPI
+
+@@ -60,7 +60,7 @@ config CRYPTO_BLKCIPHER2
+ select CRYPTO_WORKQUEUE
+
+ config CRYPTO_HASH
+- tristate
++ tristate "HASH"
+ select CRYPTO_HASH2
+ select CRYPTO_ALGAPI
+
+@@ -69,7 +69,7 @@ config CRYPTO_HASH2
+ select CRYPTO_ALGAPI2
+
+ config CRYPTO_RNG
+- tristate
++ tristate "RNG"
+ select CRYPTO_RNG2
+ select CRYPTO_ALGAPI
+
--- /dev/null
+--- a/net/wireless/Kconfig
++++ b/net/wireless/Kconfig
+@@ -1,5 +1,5 @@
+ config WIRELESS_EXT
+- bool
++ bool "Wireless extensions"
+
+ config WEXT_CORE
+ def_bool y
+@@ -11,10 +11,10 @@ config WEXT_PROC
+ depends on WEXT_CORE
+
+ config WEXT_SPY
+- bool
++ bool "WEXT_SPY"
+
+ config WEXT_PRIV
+- bool
++ bool "WEXT_PRIV"
+
+ config CFG80211
+ tristate "cfg80211 - wireless configuration API"
--- /dev/null
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -2,7 +2,7 @@ menu "Core Netfilter Configuration"
+ depends on NET && INET && NETFILTER
+
+ config NETFILTER_NETLINK
+- tristate
++ tristate "Netfilter NFNETLINK interface"
+
+ config NETFILTER_NETLINK_ACCT
+ tristate "Netfilter NFACCT over NFNETLINK interface"
--- /dev/null
+From: Mark Miller <mark@mirell.org>
+
+This exposes the CONFIG_BOOT_RAW symbol in Kconfig. This is needed on
+certain Broadcom chipsets running CFE in order to load the kernel.
+
+Signed-off-by: Mark Miller <mark@mirell.org>
+Acked-by: Rob Landley <rob@landley.net>
+---
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -912,9 +912,6 @@ config ARC
+ config ARCH_MAY_HAVE_PC_FDC
+ bool
+
+-config BOOT_RAW
+- bool
+-
+ config CEVT_BCM1480
+ bool
+
+@@ -2387,6 +2384,18 @@ config USE_OF
+ select OF_EARLY_FLATTREE
+ select IRQ_DOMAIN
+
++config BOOT_RAW
++ bool "Enable the kernel to be executed from the load address"
++ default n
++ help
++ Allow the kernel to be executed from the load address for
++ bootloaders which cannot read the ELF format. This places
++ a jump to start_kernel at the load address.
++
++ If unsure, say N.
++
++
++
+ endmenu
+
+ config LOCKDEP_SUPPORT
--- /dev/null
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -1011,6 +1011,10 @@ config SYNC_R4K
+ config MIPS_MACHINE
+ def_bool n
+
++config IMAGE_CMDLINE_HACK
++ bool "OpenWrt specific image command line hack"
++ default n
++
+ config NO_IOPORT
+ def_bool n
+
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
+@@ -141,6 +141,12 @@ FEXPORT(__kernel_entry)
+ j kernel_entry
+ #endif
+
++#ifdef CONFIG_IMAGE_CMDLINE_HACK
++ .ascii "CMDLINE:"
++EXPORT(__image_cmdline)
++ .fill 0x400
++#endif /* CONFIG_IMAGE_CMDLINE_HACK */
++
+ __REF
+
+ NESTED(kernel_entry, 16, sp) # kernel entry point
--- /dev/null
+--- a/arch/mips/kernel/machine_kexec.c
++++ b/arch/mips/kernel/machine_kexec.c
+@@ -52,7 +52,7 @@ machine_kexec(struct kimage *image)
+ reboot_code_buffer =
+ (unsigned long)page_address(image->control_code_page);
+
+- kexec_start_address = image->start;
++ kexec_start_address = (unsigned long) phys_to_virt(image->start);
+ kexec_indirection_page =
+ (unsigned long) phys_to_virt(image->head & PAGE_MASK);
+
--- /dev/null
+MIPS: allow disabling the kernel FPU emulator
+
+This patch allows turning off the in-kernel Algorithmics
+FPU emulator support, which allows one to save a couple of
+precious blocks on an embedded system.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+--
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -996,6 +996,17 @@ config I8259
+ config MIPS_BONITO64
+ bool
+
++config MIPS_FPU_EMU
++ bool "Enable FPU emulation"
++ default y
++ help
++ This option allows building a kernel with or without the Algorithmics
++ FPU emulator enabled. Turning off this option results in a kernel which
++ does not catch floating operations exceptions. Make sure that your toolchain
++ is configured to enable software floating point emulation in that case.
++
++ If unsure say Y here.
++
+ config MIPS_MSC
+ bool
+
+--- a/arch/mips/math-emu/Makefile
++++ b/arch/mips/math-emu/Makefile
+@@ -2,11 +2,13 @@
+ # Makefile for the Linux/MIPS kernel FPU emulation.
+ #
+
+-obj-y := cp1emu.o ieee754m.o ieee754d.o ieee754dp.o ieee754sp.o ieee754.o \
++obj-y := kernel_linkage.o dsemul.o cp1emu.o
++
++obj-$(CONFIG_MIPS_FPU_EMU) += ieee754m.o ieee754d.o ieee754dp.o ieee754sp.o ieee754.o \
+ ieee754xcpt.o dp_frexp.o dp_modf.o dp_div.o dp_mul.o dp_sub.o \
+ dp_add.o dp_fsp.o dp_cmp.o dp_logb.o dp_scalb.o dp_simple.o \
+ dp_tint.o dp_fint.o dp_tlong.o dp_flong.o sp_frexp.o sp_modf.o \
+ sp_div.o sp_mul.o sp_sub.o sp_add.o sp_fdp.o sp_cmp.o sp_logb.o \
+ sp_scalb.o sp_simple.o sp_tint.o sp_fint.o sp_tlong.o sp_flong.o \
+- dp_sqrt.o sp_sqrt.o kernel_linkage.o dsemul.o
++ dp_sqrt.o sp_sqrt.o
+
+--- a/arch/mips/math-emu/cp1emu.c
++++ b/arch/mips/math-emu/cp1emu.c
+@@ -58,7 +58,11 @@
+ #define __mips 4
+
+ /* Function which emulates a floating point instruction. */
++#ifdef CONFIG_DEBUG_FS
++DEFINE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats);
++#endif
+
++#ifdef CONFIG_MIPS_FPU_EMU
+ static int fpu_emu(struct pt_regs *, struct mips_fpu_struct *,
+ mips_instruction);
+
+@@ -69,10 +73,6 @@ static int fpux_emu(struct pt_regs *,
+
+ /* Further private data for which no space exists in mips_fpu_struct */
+
+-#ifdef CONFIG_DEBUG_FS
+-DEFINE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats);
+-#endif
+-
+ /* Control registers */
+
+ #define FPCREG_RID 0 /* $0 = revision id */
+@@ -1360,7 +1360,6 @@ int fpu_emulator_cop1Handler(struct pt_r
+
+ return sig;
+ }
+-
+ #ifdef CONFIG_DEBUG_FS
+
+ static int fpuemu_stat_get(void *data, u64 *val)
+@@ -1409,4 +1408,11 @@ static int __init debugfs_fpuemu(void)
+ return 0;
+ }
+ __initcall(debugfs_fpuemu);
+-#endif
++#endif /* CONFIG_DEBUGFS */
++#else
++int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
++ int has_fpu)
++{
++ return 0;
++}
++#endif /* CONFIG_MIPS_FPU_EMU */
+--- a/arch/mips/math-emu/dsemul.c
++++ b/arch/mips/math-emu/dsemul.c
+@@ -108,6 +108,7 @@ int mips_dsemul(struct pt_regs *regs, mi
+ return SIGILL; /* force out of emulation loop */
+ }
+
++#ifdef CONFIG_MIPS_FPU_EMU
+ int do_dsemulret(struct pt_regs *xcp)
+ {
+ struct emuframe __user *fr;
+@@ -164,3 +165,9 @@ int do_dsemulret(struct pt_regs *xcp)
+
+ return 1;
+ }
++#else
++int do_dsemulret(struct pt_regs *xcp)
++{
++ return 0;
++}
++#endif /* CONFIG_MIPS_FPU_EMU */
+--- a/arch/mips/math-emu/kernel_linkage.c
++++ b/arch/mips/math-emu/kernel_linkage.c
+@@ -29,6 +29,7 @@
+
+ #define SIGNALLING_NAN 0x7ff800007ff80000LL
+
++#ifdef CONFIG_MIPS_FPU_EMU
+ void fpu_emulator_init_fpu(void)
+ {
+ static int first = 1;
+@@ -112,4 +113,36 @@ int fpu_emulator_restore_context32(struc
+
+ return err;
+ }
+-#endif
++#endif /* CONFIG_64BIT */
++#else
++
++void fpu_emulator_init_fpu(void)
++{
++ printk(KERN_INFO "FPU emulator disabled, make sure your toolchain"
++ "was compiled with software floating point support (soft-float)\n");
++ return;
++}
++
++int fpu_emulator_save_context(struct sigcontext __user *sc)
++{
++ return 0;
++}
++
++int fpu_emulator_restore_context(struct sigcontext __user *sc)
++{
++ return 0;
++}
++
++int fpu_emulator_save_context32(struct sigcontext32 __user *sc)
++{
++ return 0;
++}
++
++int fpu_emulator_restore_context32(struct sigcontext32 __user *sc)
++{
++ return 0;
++}
++
++#ifdef CONFIG_64BIT
++#endif /* CONFIG_64BIT */
++#endif /* CONFIG_MIPS_FPU_EMU */
--- /dev/null
+--- a/arch/mips/include/asm/string.h
++++ b/arch/mips/include/asm/string.h
+@@ -133,11 +133,44 @@ strncmp(__const__ char *__cs, __const__
+
+ #define __HAVE_ARCH_MEMSET
+ extern void *memset(void *__s, int __c, size_t __count);
++#define memset(__s, __c, len) \
++({ \
++ size_t __len = (len); \
++ void *__ret; \
++ if (__builtin_constant_p(len) && __len >= 64) \
++ __ret = memset((__s), (__c), __len); \
++ else \
++ __ret = __builtin_memset((__s), (__c), __len); \
++ __ret; \
++})
+
+ #define __HAVE_ARCH_MEMCPY
+ extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
++#define memcpy(dst, src, len) \
++({ \
++ size_t __len = (len); \
++ void *__ret; \
++ if (__builtin_constant_p(len) && __len >= 64) \
++ __ret = memcpy((dst), (src), __len); \
++ else \
++ __ret = __builtin_memcpy((dst), (src), __len); \
++ __ret; \
++})
+
+ #define __HAVE_ARCH_MEMMOVE
+ extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
++#define memmove(dst, src, len) \
++({ \
++ size_t __len = (len); \
++ void *__ret; \
++ if (__builtin_constant_p(len) && __len >= 64) \
++ __ret = memmove((dst), (src), __len); \
++ else \
++ __ret = __builtin_memmove((dst), (src), __len); \
++ __ret; \
++})
++
++#define __HAVE_ARCH_MEMCMP
++#define memcmp(src1, src2, len) __builtin_memcmp((src1), (src2), (len))
+
+ #endif /* _ASM_STRING_H */
+--- a/arch/mips/lib/Makefile
++++ b/arch/mips/lib/Makefile
+@@ -4,7 +4,7 @@
+
+ lib-y += bitops.o csum_partial.o delay.o memcpy.o memset.o \
+ mips-atomic.o strlen_user.o strncpy_user.o \
+- strnlen_user.o uncached.o
++ strnlen_user.o uncached.o memcmp.o
+
+ obj-y += iomap.o
+ obj-$(CONFIG_PCI) += iomap-pci.o
+--- /dev/null
++++ b/arch/mips/lib/memcmp.c
+@@ -0,0 +1,22 @@
++/*
++ * copied from linux/lib/string.c
++ *
++ * Copyright (C) 1991, 1992 Linus Torvalds
++ */
++
++#include <linux/module.h>
++#include <linux/string.h>
++
++#undef memcmp
++int memcmp(const void *cs, const void *ct, size_t count)
++{
++ const unsigned char *su1, *su2;
++ int res = 0;
++
++ for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--)
++ if ((res = *su1 - *su2) != 0)
++ break;
++ return res;
++}
++EXPORT_SYMBOL(memcmp);
++
--- /dev/null
+--- a/arch/mips/oprofile/op_model_mipsxx.c
++++ b/arch/mips/oprofile/op_model_mipsxx.c
+@@ -303,6 +303,11 @@ static irqreturn_t mipsxx_perfcount_int(
+ return mipsxx_perfcount_handler();
+ }
+
++static irqreturn_t mipsxx_perfcount_int(int irq, void *dev_id)
++{
++ return mipsxx_perfcount_handler();
++}
++
+ static int __init mipsxx_init(void)
+ {
+ int counters;
+@@ -385,6 +390,10 @@ static int __init mipsxx_init(void)
+ return request_irq(cp0_perfcount_irq, mipsxx_perfcount_int,
+ 0, "Perfcounter", save_perf_irq);
+
++ if (cp0_perfcount_irq >= 0)
++ return request_irq(cp0_perfcount_irq, mipsxx_perfcount_int,
++ IRQF_SHARED, "Perfcounter", save_perf_irq);
++
+ return 0;
+ }
+
+@@ -395,6 +404,9 @@ static void mipsxx_exit(void)
+ if ((cp0_perfcount_irq >= 0) && (cp0_compare_irq != cp0_perfcount_irq))
+ free_irq(cp0_perfcount_irq, save_perf_irq);
+
++ if (cp0_perfcount_irq >= 0)
++ free_irq(cp0_perfcount_irq, save_perf_irq);
++
+ counters = counters_per_cpu_to_total(counters);
+ on_each_cpu(reset_counters, (void *)(long)counters, 1);
+
--- /dev/null
+--- a/arch/mips/kernel/cpu-probe.c
++++ b/arch/mips/kernel/cpu-probe.c
+@@ -839,10 +839,13 @@ static inline void cpu_probe_mips(struct
+ __cpu_name[cpu] = "MIPS 20Kc";
+ break;
+ case PRID_IMP_24K:
+- case PRID_IMP_24KE:
+ c->cputype = CPU_24K;
+ __cpu_name[cpu] = "MIPS 24Kc";
+ break;
++ case PRID_IMP_24KE:
++ c->cputype = CPU_24K;
++ __cpu_name[cpu] = "MIPS 24KEc";
++ break;
+ case PRID_IMP_25KF:
+ c->cputype = CPU_25KF;
+ __cpu_name[cpu] = "MIPS 25Kc";
--- /dev/null
+--- a/arch/mips/mm/cache.c
++++ b/arch/mips/mm/cache.c
+@@ -39,6 +39,7 @@ void (*__flush_kernel_vmap_range)(unsign
+ void (*__invalidate_kernel_vmap_range)(unsigned long vaddr, int size);
+
+ EXPORT_SYMBOL_GPL(__flush_kernel_vmap_range);
++EXPORT_SYMBOL(__flush_cache_all);
+
+ /* MIPS specific cache operations */
+ void (*flush_cache_sigtramp)(unsigned long addr);
+--- a/fs/fuse/dev.c
++++ b/fs/fuse/dev.c
+@@ -19,6 +19,9 @@
+ #include <linux/pipe_fs_i.h>
+ #include <linux/swap.h>
+ #include <linux/splice.h>
++#ifdef CONFIG_MIPS
++#include <asm/cacheflush.h>
++#endif
+
+ MODULE_ALIAS_MISCDEV(FUSE_MINOR);
+ MODULE_ALIAS("devname:fuse");
+@@ -654,6 +657,9 @@ static int fuse_copy_fill(struct fuse_co
+ static int fuse_copy_do(struct fuse_copy_state *cs, void **val, unsigned *size)
+ {
+ unsigned ncpy = min(*size, cs->len);
++#ifdef CONFIG_MIPS
++ __flush_cache_all();
++#endif
+ if (val) {
+ if (cs->write)
+ memcpy(cs->buf, *val, ncpy);
--- /dev/null
+--- a/arch/arm/kernel/module.c
++++ b/arch/arm/kernel/module.c
+@@ -81,6 +81,10 @@ apply_relocate(Elf32_Shdr *sechdrs, cons
+ return -ENOEXEC;
+ }
+
++ if ((IS_ERR_VALUE(sym->st_value) || !sym->st_value) &&
++ ELF_ST_BIND(sym->st_info) == STB_WEAK)
++ continue;
++
+ loc = dstsec->sh_addr + rel->r_offset;
+
+ switch (ELF32_R_TYPE(rel->r_info)) {
--- /dev/null
+Upstream doesn't optimize the kernel and bootwrappers for ppc44x because
+they still want to support gcc 3.3 -- well, we don't.
+
+--- a/arch/powerpc/Makefile
++++ b/arch/powerpc/Makefile
+@@ -119,7 +119,8 @@ ifeq ($(CONFIG_FUNCTION_TRACER),y)
+ KBUILD_CFLAGS += -mno-sched-epilog
+ endif
+
+-cpu-as-$(CONFIG_4xx) += -Wa,-m405
++cpu-as-$(CONFIG_40x) += -Wa,-m405
++cpu-as-$(CONFIG_44x) += -Wa,-m440
+ cpu-as-$(CONFIG_ALTIVEC) += -Wa,-maltivec
+ cpu-as-$(CONFIG_E500) += -Wa,-me500
+ cpu-as-$(CONFIG_E200) += -Wa,-me200
+--- a/arch/powerpc/boot/Makefile
++++ b/arch/powerpc/boot/Makefile
+@@ -38,10 +38,10 @@ BOOTCFLAGS += -I$(obj) -I$(srctree)/$(ob
+ DTC_FLAGS ?= -p 1024
+
+ $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
+-$(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
++$(obj)/ebony.o: BOOTCFLAGS += -mcpu=440
+ $(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405
+-$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
+-$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
++$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=440
++$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440
+ $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
+ $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
+ $(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405
--- /dev/null
+--- a/arch/powerpc/Makefile
++++ b/arch/powerpc/Makefile
+@@ -86,7 +86,6 @@ CPP = $(CC) -E $(KBUILD_CFLAGS)
+
+ CHECKFLAGS += -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE)__
+
+-KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
+
+ # No AltiVec or VSX instructions when building kernel
+ KBUILD_CFLAGS += $(call cc-option,-mno-altivec)
--- /dev/null
+--- a/drivers/crypto/amcc/crypto4xx_core.c
++++ b/drivers/crypto/amcc/crypto4xx_core.c
+@@ -19,6 +19,7 @@
+ */
+
+ #include <linux/kernel.h>
++#include <linux/module.h>
+ #include <linux/interrupt.h>
+ #include <linux/spinlock_types.h>
+ #include <linux/random.h>
--- /dev/null
+From eee16330c9de9adf7880cce9f1d32e13f89706bb Mon Sep 17 00:00:00 2001
+From: Wu Zhangjin <wuzhangjin@gmail.com>
+Date: Tue, 11 Jan 2011 13:16:47 +0000
+Subject: MIPS: Add crash and kdump support
+
+From: http://patchwork.linux-mips.org/patch/1025/
+
+Hello folks,
+
+Please find here MIPS crash and kdump patches.
+This is patch set of 3 patches:
+1. generic MIPS changes (kernel);
+2. MIPS Cavium Octeon board kexec/kdump code (kernel);
+3. Kexec user space MIPS changes.
+
+Patches were tested on the latest linux-mips@ git kernel and the latest
+kexec-tools git on Cavium Octeon 50xx board.
+
+I also made the same code working on RMI XLR/XLS boards for both
+mips32 and mips64 kernels.
+
+Best regards,
+Maxim Uvarov.
+
+------
+[ Zhangjin: Several trivial building failure has been fixed.
+
+Note: the 2nd patch can not be cleanly applied, but may be a good
+reference for the other board development:
+
+ + MIPS Cavium Octeon board kexec,kdump support
+ http://patchwork.linux-mips.org/patch/1026/
+
+And the 3rd patch has already been merged into the mainline kexec-tools:
+
+ + some kexec MIPS improvements
+ http://patchwork.linux-mips.org/patch/1027/
+
+kexec-tools is available here:
+
+ + http://horms.net/projects/kexec/
+ git://git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git
+]
+Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
+---
+(limited to 'arch/mips/kernel')
+
+--- a/arch/mips/kernel/Makefile
++++ b/arch/mips/kernel/Makefile
+@@ -80,7 +80,8 @@ obj-$(CONFIG_I8253) += i8253.o
+
+ obj-$(CONFIG_GPIO_TXX9) += gpio_txx9.o
+
+-obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
++obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o crash.o
++obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+ obj-$(CONFIG_SPINLOCK_TEST) += spinlock_test.o
+ obj-$(CONFIG_MIPS_MACHINE) += mips_machine.o
+--- /dev/null
++++ b/arch/mips/kernel/crash.c
+@@ -0,0 +1,75 @@
++#include <linux/kernel.h>
++#include <linux/smp.h>
++#include <linux/reboot.h>
++#include <linux/kexec.h>
++#include <linux/bootmem.h>
++#include <linux/crash_dump.h>
++#include <linux/delay.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++#include <linux/types.h>
++#include <linux/sched.h>
++
++#ifdef CONFIG_CRASH_DUMP
++unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
++#endif
++
++/* This keeps a track of which one is crashing cpu. */
++int crashing_cpu = -1;
++static cpumask_t cpus_in_crash = CPU_MASK_NONE;
++
++#ifdef CONFIG_SMP
++void crash_shutdown_secondary(void *ignore)
++{
++ struct pt_regs *regs;
++ int cpu = smp_processor_id();
++
++ regs = task_pt_regs(current);
++
++ if (!cpu_online(cpu))
++ return;
++
++ local_irq_disable();
++ if (!cpu_isset(cpu, cpus_in_crash))
++ crash_save_cpu(regs, cpu);
++ cpu_set(cpu, cpus_in_crash);
++
++ while (!atomic_read(&kexec_ready_to_reboot))
++ cpu_relax();
++ relocated_kexec_smp_wait(NULL);
++ /* NOTREACHED */
++}
++
++static void crash_kexec_prepare_cpus(void)
++{
++ unsigned int msecs;
++
++ unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */
++
++ dump_send_ipi(crash_shutdown_secondary);
++ smp_wmb();
++
++ /*
++ * The crash CPU sends an IPI and wait for other CPUs to
++ * respond. Delay of at least 10 seconds.
++ */
++ printk(KERN_EMERG "Sending IPI to other cpus...\n");
++ msecs = 10000;
++ while ((cpus_weight(cpus_in_crash) < ncpus) && (--msecs > 0)) {
++ cpu_relax();
++ mdelay(1);
++ }
++}
++
++#else
++static void crash_kexec_prepare_cpus(void) {}
++#endif
++
++void default_machine_crash_shutdown(struct pt_regs *regs)
++{
++ local_irq_disable();
++ crashing_cpu = smp_processor_id();
++ crash_save_cpu(regs, crashing_cpu);
++ crash_kexec_prepare_cpus();
++ cpu_set(crashing_cpu, cpus_in_crash);
++}
+--- /dev/null
++++ b/arch/mips/kernel/crash_dump.c
+@@ -0,0 +1,86 @@
++#include <linux/highmem.h>
++#include <linux/bootmem.h>
++#include <linux/crash_dump.h>
++#include <asm/uaccess.h>
++
++#ifdef CONFIG_PROC_VMCORE
++static int __init parse_elfcorehdr(char *p)
++{
++ if (p)
++ elfcorehdr_addr = memparse(p, &p);
++ return 1;
++}
++__setup("elfcorehdr=", parse_elfcorehdr);
++#endif
++
++static int __init parse_savemaxmem(char *p)
++{
++ if (p)
++ saved_max_pfn = (memparse(p, &p) >> PAGE_SHIFT) - 1;
++
++ return 1;
++}
++__setup("savemaxmem=", parse_savemaxmem);
++
++
++static void *kdump_buf_page;
++
++/**
++ * copy_oldmem_page - copy one page from "oldmem"
++ * @pfn: page frame number to be copied
++ * @buf: target memory address for the copy; this can be in kernel address
++ * space or user address space (see @userbuf)
++ * @csize: number of bytes to copy
++ * @offset: offset in bytes into the page (based on pfn) to begin the copy
++ * @userbuf: if set, @buf is in user address space, use copy_to_user(),
++ * otherwise @buf is in kernel address space, use memcpy().
++ *
++ * Copy a page from "oldmem". For this page, there is no pte mapped
++ * in the current kernel.
++ *
++ * Calling copy_to_user() in atomic context is not desirable. Hence first
++ * copying the data to a pre-allocated kernel page and then copying to user
++ * space in non-atomic context.
++ */
++ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
++ size_t csize, unsigned long offset, int userbuf)
++{
++ void *vaddr;
++
++ if (!csize)
++ return 0;
++
++ vaddr = kmap_atomic_pfn(pfn, KM_PTE0);
++
++ if (!userbuf) {
++ memcpy(buf, (vaddr + offset), csize);
++ kunmap_atomic(vaddr, KM_PTE0);
++ } else {
++ if (!kdump_buf_page) {
++ printk(KERN_WARNING "Kdump: Kdump buffer page not"
++ " allocated\n");
++ return -EFAULT;
++ }
++ copy_page(kdump_buf_page, vaddr);
++ kunmap_atomic(vaddr, KM_PTE0);
++ if (copy_to_user(buf, (kdump_buf_page + offset), csize))
++ return -EFAULT;
++ }
++
++ return csize;
++}
++
++static int __init kdump_buf_page_init(void)
++{
++ int ret = 0;
++
++ kdump_buf_page = kmalloc(PAGE_SIZE, GFP_KERNEL);
++ if (!kdump_buf_page) {
++ printk(KERN_WARNING "Kdump: Failed to allocate kdump buffer"
++ " page\n");
++ ret = -ENOMEM;
++ }
++
++ return ret;
++}
++arch_initcall(kdump_buf_page_init);
+--- a/arch/mips/kernel/machine_kexec.c
++++ b/arch/mips/kernel/machine_kexec.c
+@@ -19,9 +19,19 @@ extern const size_t relocate_new_kernel_
+ extern unsigned long kexec_start_address;
+ extern unsigned long kexec_indirection_page;
+
++int (*_machine_kexec_prepare)(struct kimage *) = NULL;
++void (*_machine_kexec_shutdown)(void) = NULL;
++void (*_machine_crash_shutdown)(struct pt_regs *regs) = NULL;
++#ifdef CONFIG_SMP
++void (*relocated_kexec_smp_wait) (void *);
++atomic_t kexec_ready_to_reboot = ATOMIC_INIT(0);
++#endif
++
+ int
+ machine_kexec_prepare(struct kimage *kimage)
+ {
++ if (_machine_kexec_prepare)
++ return _machine_kexec_prepare(kimage);
+ return 0;
+ }
+
+@@ -33,11 +43,17 @@ machine_kexec_cleanup(struct kimage *kim
+ void
+ machine_shutdown(void)
+ {
++ if (_machine_kexec_shutdown)
++ _machine_kexec_shutdown();
+ }
+
+ void
+ machine_crash_shutdown(struct pt_regs *regs)
+ {
++ if (_machine_crash_shutdown)
++ _machine_crash_shutdown(regs);
++ else
++ default_machine_crash_shutdown(regs);
+ }
+
+ typedef void (*noretfun_t)(void) __attribute__((noreturn));
+@@ -52,7 +68,9 @@ machine_kexec(struct kimage *image)
+ reboot_code_buffer =
+ (unsigned long)page_address(image->control_code_page);
+
+- kexec_start_address = (unsigned long) phys_to_virt(image->start);
++ kexec_start_address =
++ (unsigned long) phys_to_virt(image->start);
++
+ kexec_indirection_page =
+ (unsigned long) phys_to_virt(image->head & PAGE_MASK);
+
+@@ -63,7 +81,7 @@ machine_kexec(struct kimage *image)
+ * The generic kexec code builds a page list with physical
+ * addresses. they are directly accessible through KSEG0 (or
+ * CKSEG0 or XPHYS if on 64bit system), hence the
+- * pys_to_virt() call.
++ * phys_to_virt() call.
+ */
+ for (ptr = &image->head; (entry = *ptr) && !(entry &IND_DONE);
+ ptr = (entry & IND_INDIRECTION) ?
+@@ -81,5 +99,13 @@ machine_kexec(struct kimage *image)
+ printk("Will call new kernel at %08lx\n", image->start);
+ printk("Bye ...\n");
+ __flush_cache_all();
++#ifdef CONFIG_SMP
++ /* All secondary cpus now may jump to kexec_wait cycle */
++ relocated_kexec_smp_wait = reboot_code_buffer +
++ (void *)(kexec_smp_wait - relocate_new_kernel);
++ smp_wmb();
++ atomic_set(&kexec_ready_to_reboot, 1);
++#endif
+ ((noretfun_t) reboot_code_buffer)();
+ }
++
+--- a/arch/mips/kernel/relocate_kernel.S
++++ b/arch/mips/kernel/relocate_kernel.S
+@@ -15,6 +15,11 @@
+ #include <asm/addrspace.h>
+
+ LEAF(relocate_new_kernel)
++ PTR_L a0, arg0
++ PTR_L a1, arg1
++ PTR_L a2, arg2
++ PTR_L a3, arg3
++
+ PTR_L s0, kexec_indirection_page
+ PTR_L s1, kexec_start_address
+
+@@ -26,7 +31,6 @@ process_entry:
+ and s3, s2, 0x1
+ beq s3, zero, 1f
+ and s4, s2, ~0x1 /* store destination addr in s4 */
+- move a0, s4
+ b process_entry
+
+ 1:
+@@ -60,23 +64,100 @@ copy_word:
+ b process_entry
+
+ done:
++#ifdef CONFIG_SMP
++ /* kexec_flag reset is signal to other CPUs what kernel
++ was moved to it's location. Note - we need relocated address
++ of kexec_flag. */
++
++ bal 1f
++ 1: move t1,ra;
++ PTR_LA t2,1b
++ PTR_LA t0,kexec_flag
++ PTR_SUB t0,t0,t2;
++ PTR_ADD t0,t1,t0;
++ LONG_S zero,(t0)
++#endif
++
++ sync
+ /* jump to kexec_start_address */
+ j s1
+ END(relocate_new_kernel)
+
+-kexec_start_address:
+- EXPORT(kexec_start_address)
++#ifdef CONFIG_SMP
++/*
++ * Other CPUs should wait until code is relocated and
++ * then start at entry (?) point.
++ */
++LEAF(kexec_smp_wait)
++ PTR_L a0, s_arg0
++ PTR_L a1, s_arg1
++ PTR_L a2, s_arg2
++ PTR_L a3, s_arg3
++ PTR_L s1, kexec_start_address
++
++ /* Non-relocated address works for args and kexec_start_address ( old
++ * kernel is not overwritten). But we need relocated address of
++ * kexec_flag.
++ */
++
++ bal 1f
++1: move t1,ra;
++ PTR_LA t2,1b
++ PTR_LA t0,kexec_flag
++ PTR_SUB t0,t0,t2;
++ PTR_ADD t0,t1,t0;
++
++1: LONG_L s0, (t0)
++ bne s0, zero,1b
++
++ sync
++ j s1
++ END(kexec_smp_wait)
++#endif
++
++#ifdef __mips64
++ /* all PTR's must be aligned to 8 byte in 64-bit mode */
++ .align 3
++#endif
++
++/* All parameters to new kernel are passed in registers a0-a3.
++ * kexec_args[0..3] are uses to prepare register values.
++ */
++
++EXPORT(kexec_args)
++arg0: PTR 0x0
++arg1: PTR 0x0
++arg2: PTR 0x0
++arg3: PTR 0x0
++ .size kexec_args,PTRSIZE*4
++
++#ifdef CONFIG_SMP
++/*
++ * Secondary CPUs may have different kernel parameters in
++ * their registers a0-a3. secondary_kexec_args[0..3] are used
++ * to prepare register values.
++ */
++EXPORT(secondary_kexec_args)
++s_arg0: PTR 0x0
++s_arg1: PTR 0x0
++s_arg2: PTR 0x0
++s_arg3: PTR 0x0
++ .size secondary_kexec_args,PTRSIZE*4
++kexec_flag:
++ LONG 0x1
++
++#endif
++
++EXPORT(kexec_start_address)
+ PTR 0x0
+ .size kexec_start_address, PTRSIZE
+
+-kexec_indirection_page:
+- EXPORT(kexec_indirection_page)
++EXPORT(kexec_indirection_page)
+ PTR 0
+ .size kexec_indirection_page, PTRSIZE
+
+ relocate_new_kernel_end:
+
+-relocate_new_kernel_size:
+- EXPORT(relocate_new_kernel_size)
++EXPORT(relocate_new_kernel_size)
+ PTR relocate_new_kernel_end - relocate_new_kernel
+ .size relocate_new_kernel_size, PTRSIZE
+--- a/arch/mips/kernel/setup.c
++++ b/arch/mips/kernel/setup.c
+@@ -22,6 +22,7 @@
+ #include <linux/console.h>
+ #include <linux/pfn.h>
+ #include <linux/debugfs.h>
++#include <linux/kexec.h>
+
+ #include <asm/addrspace.h>
+ #include <asm/bootinfo.h>
+@@ -522,12 +523,62 @@ static void __init arch_mem_init(char **
+ }
+
+ bootmem_init();
++#ifdef CONFIG_KEXEC
++ if (crashk_res.start != crashk_res.end)
++ reserve_bootmem(crashk_res.start,
++ crashk_res.end - crashk_res.start + 1,
++ BOOTMEM_DEFAULT);
++#endif
+ device_tree_init();
+ sparse_init();
+ plat_swiotlb_setup();
+ paging_init();
+ }
+
++#ifdef CONFIG_KEXEC
++static inline unsigned long long get_total_mem(void)
++{
++ unsigned long long total;
++ total = max_pfn - min_low_pfn;
++ return total << PAGE_SHIFT;
++}
++
++static void __init mips_parse_crashkernel(void)
++{
++ unsigned long long total_mem;
++ unsigned long long crash_size, crash_base;
++ int ret;
++
++ total_mem = get_total_mem();
++ ret = parse_crashkernel(boot_command_line, total_mem,
++ &crash_size, &crash_base);
++ if (ret != 0 || crash_size <= 0)
++ return;
++
++ crashk_res.start = crash_base;
++ crashk_res.end = crash_base + crash_size - 1;
++}
++static void __init request_crashkernel(struct resource *res)
++{
++ int ret;
++
++ ret = request_resource(res, &crashk_res);
++ if (!ret)
++ printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
++ "for crashkernel\n",
++ (unsigned long)((crashk_res.end -
++ crashk_res.start + 1) >> 20),
++ (unsigned long)(crashk_res.start >> 20));
++}
++#else
++static void __init mips_parse_crashkernel(void)
++{
++}
++static void __init request_crashkernel(struct resource *res)
++{
++}
++#endif
++
+ static void __init resource_init(void)
+ {
+ int i;
+@@ -543,6 +594,8 @@ static void __init resource_init(void)
+ /*
+ * Request address space for all standard RAM.
+ */
++ mips_parse_crashkernel();
++
+ for (i = 0; i < boot_mem_map.nr_map; i++) {
+ struct resource *res;
+ unsigned long start, end;
+@@ -579,6 +632,7 @@ static void __init resource_init(void)
+ */
+ request_resource(res, &code_resource);
+ request_resource(res, &data_resource);
++ request_crashkernel(res);
+ }
+ }
+
+--- a/arch/mips/kernel/smp.c
++++ b/arch/mips/kernel/smp.c
+@@ -386,3 +386,21 @@ void flush_tlb_one(unsigned long vaddr)
+
+ EXPORT_SYMBOL(flush_tlb_page);
+ EXPORT_SYMBOL(flush_tlb_one);
++
++#if defined(CONFIG_KEXEC)
++void (*dump_ipi_function_ptr)(void *) = NULL;
++void dump_send_ipi(void (*dump_ipi_callback)(void *))
++{
++ int i;
++ int cpu = smp_processor_id();
++
++ dump_ipi_function_ptr = dump_ipi_callback;
++ smp_mb();
++ for_each_online_cpu(i)
++ if (i != cpu)
++ core_send_ipi(i, SMP_DUMP);
++
++}
++EXPORT_SYMBOL(dump_send_ipi);
++#endif
++
+--- a/arch/mips/include/asm/kexec.h
++++ b/arch/mips/include/asm/kexec.h
+@@ -9,22 +9,45 @@
+ #ifndef _MIPS_KEXEC
+ # define _MIPS_KEXEC
+
++#include <asm/stacktrace.h>
++
++extern unsigned long long elfcorehdr_addr;
++
+ /* Maximum physical address we can use pages from */
+ #define KEXEC_SOURCE_MEMORY_LIMIT (0x20000000)
+ /* Maximum address we can reach in physical address mode */
+ #define KEXEC_DESTINATION_MEMORY_LIMIT (0x20000000)
+ /* Maximum address we can use for the control code buffer */
+ #define KEXEC_CONTROL_MEMORY_LIMIT (0x20000000)
+-
+-#define KEXEC_CONTROL_PAGE_SIZE 4096
++/* Reserve 3*4096 bytes for board-specific info */
++#define KEXEC_CONTROL_PAGE_SIZE (4096 + 3*4096)
+
+ /* The native architecture */
+ #define KEXEC_ARCH KEXEC_ARCH_MIPS
++#define MAX_NOTE_BYTES 1024
+
+ static inline void crash_setup_regs(struct pt_regs *newregs,
+- struct pt_regs *oldregs)
++ struct pt_regs *oldregs)
+ {
+- /* Dummy implementation for now */
++ if (oldregs)
++ memcpy(newregs, oldregs, sizeof(*newregs));
++ else
++ prepare_frametrace(newregs);
+ }
+
++#ifdef CONFIG_KEXEC
++struct kimage;
++extern unsigned long kexec_args[4];
++extern int (*_machine_kexec_prepare)(struct kimage *);
++extern void (*_machine_kexec_shutdown)(void);
++extern void (*_machine_crash_shutdown)(struct pt_regs *regs);
++extern void default_machine_crash_shutdown(struct pt_regs *regs);
++#ifdef CONFIG_SMP
++extern const unsigned char kexec_smp_wait[];
++extern unsigned long secondary_kexec_args[4];
++extern void (*relocated_kexec_smp_wait) (void *);
++extern atomic_t kexec_ready_to_reboot;
++#endif
++#endif
++
+ #endif /* !_MIPS_KEXEC */
+--- a/arch/mips/include/asm/smp.h
++++ b/arch/mips/include/asm/smp.h
+@@ -40,6 +40,8 @@ extern int __cpu_logical_map[NR_CPUS];
+ #define SMP_CALL_FUNCTION 0x2
+ /* Octeon - Tell another core to flush its icache */
+ #define SMP_ICACHE_FLUSH 0x4
++/* Used by kexec crashdump to save all cpu's state */
++#define SMP_DUMP 0x8
+
+ extern volatile cpumask_t cpu_callin_map;
+
+@@ -91,4 +93,9 @@ static inline void arch_send_call_functi
+ mp_ops->send_ipi_mask(mask, SMP_CALL_FUNCTION);
+ }
+
++extern void core_send_ipi(int cpu, unsigned int action);
++#if defined(CONFIG_KEXEC)
++extern void (*dump_ipi_function_ptr)(void *);
++void dump_send_ipi(void (*dump_ipi_callback)(void *));
++#endif
+ #endif /* __ASM_SMP_H */
--- /dev/null
+From 03cd81fbca6b91317ec1a7b3b3c09fb8d08f83a6 Mon Sep 17 00:00:00 2001
+From: Wu Zhangjin <wuzhangjin@gmail.com>
+Date: Tue, 11 Jan 2011 18:42:08 +0000
+Subject: MIPS: Kexec: Enhance the support
+
+Changes:
+ o Print more information in machine_kexec() for debugging
+ E.g. with this information, the kexec_start_address has been found
+ it was wrong with 64bit kernel / o32 kexec-tools. Which must be
+ fixed later.
+ o Link relocate_kernel.S to a section for future extension
+ This allows more functions can be added for the kexec relocation
+ part even written in C. to add code into that section, you just need
+ to mark your function or data with __kexec or
+ __attribute__((__section__(".__kexec.relocate")))
+
+TODO:
+
+1. Make 64bit kernel / o32|n32|64 kexec-tools works
+
+Fix the user-space kexec-tools, seems the tool only work for 32bit
+machine. So, we need to add 64bit support for it. The address of the
+entry point(kexec_start_address) is wrong and make the "kexec -e" fail.
+the real entry point must be read from the new kernel image by the
+user-space kexec-tools, otherwise, it will not work. The above 64bit
+support tested is 64bit kernel with o32 user-space kexec-tools. The root
+cause may be the different definition of virt_to_phys() and
+phys_to_virt() in the kexec-tools and kernel space for 64bit system /
+o32 kernel.
+
+Ref: http://www.linux-mips.org/archives/linux-mips/2009-08/msg00149.html
+
+2. Pass the arguments from kexec-tools to the new kernel image
+
+Please refer to: "MIPS: Loongson: Kexec: Pass parameters to new kernel"
+
+Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
+---
+--- a/arch/mips/include/asm/kexec.h
++++ b/arch/mips/include/asm/kexec.h
+@@ -36,6 +36,16 @@ static inline void crash_setup_regs(stru
+ }
+
+ #ifdef CONFIG_KEXEC
++
++#define __kexec __attribute__((__section__(".__kexec.relocate")))
++
++/* The linker tells us where the relocate_new_kernel part is. */
++extern const unsigned char __start___kexec_relocate;
++extern const unsigned char __end___kexec_relocate;
++
++extern unsigned long kexec_start_address;
++extern unsigned long kexec_indirection_page;
++
+ struct kimage;
+ extern unsigned long kexec_args[4];
+ extern int (*_machine_kexec_prepare)(struct kimage *);
+--- a/arch/mips/kernel/machine_kexec.c
++++ b/arch/mips/kernel/machine_kexec.c
+@@ -13,12 +13,6 @@
+ #include <asm/cacheflush.h>
+ #include <asm/page.h>
+
+-extern const unsigned char relocate_new_kernel[];
+-extern const size_t relocate_new_kernel_size;
+-
+-extern unsigned long kexec_start_address;
+-extern unsigned long kexec_indirection_page;
+-
+ int (*_machine_kexec_prepare)(struct kimage *) = NULL;
+ void (*_machine_kexec_shutdown)(void) = NULL;
+ void (*_machine_crash_shutdown)(struct pt_regs *regs) = NULL;
+@@ -61,21 +55,34 @@ typedef void (*noretfun_t)(void) __attri
+ void
+ machine_kexec(struct kimage *image)
+ {
++ unsigned long kexec_relocate_size;
+ unsigned long reboot_code_buffer;
+ unsigned long entry;
+ unsigned long *ptr;
+
++ kexec_relocate_size = (unsigned long)(&__end___kexec_relocate) -
++ (unsigned long)(&__start___kexec_relocate);
++ pr_info("kexec_relocate_size = %lu\n", kexec_relocate_size);
++
+ reboot_code_buffer =
+ (unsigned long)page_address(image->control_code_page);
++ pr_info("reboot_code_buffer = %p\n", (void *)reboot_code_buffer);
+
+ kexec_start_address =
+ (unsigned long) phys_to_virt(image->start);
++ pr_info("kexec_start_address(entry point of new kernel) = %p\n",
++ (void *)kexec_start_address);
+
+ kexec_indirection_page =
+ (unsigned long) phys_to_virt(image->head & PAGE_MASK);
++ pr_info("kexec_indirection_page = %p\n",
++ (void *)kexec_indirection_page);
+
+- memcpy((void*)reboot_code_buffer, relocate_new_kernel,
+- relocate_new_kernel_size);
++ memcpy((void *)reboot_code_buffer, &__start___kexec_relocate,
++ kexec_relocate_size);
++
++ pr_info("Copy kexec_relocate section from %p to reboot_code_buffer: %p\n",
++ &__start___kexec_relocate, (void *)reboot_code_buffer);
+
+ /*
+ * The generic kexec code builds a page list with physical
+@@ -96,8 +103,8 @@ machine_kexec(struct kimage *image)
+ */
+ local_irq_disable();
+
+- printk("Will call new kernel at %08lx\n", image->start);
+- printk("Bye ...\n");
++ pr_info("Will call new kernel at %p\n", (void *)kexec_start_address);
++ pr_info("Bye ...\n");
+ __flush_cache_all();
+ #ifdef CONFIG_SMP
+ /* All secondary cpus now may jump to kexec_wait cycle */
+@@ -108,4 +115,3 @@ machine_kexec(struct kimage *image)
+ #endif
+ ((noretfun_t) reboot_code_buffer)();
+ }
+-
+--- a/arch/mips/kernel/relocate_kernel.S
++++ b/arch/mips/kernel/relocate_kernel.S
+@@ -14,6 +14,8 @@
+ #include <asm/stackframe.h>
+ #include <asm/addrspace.h>
+
++ .section .kexec.relocate, "ax"
++
+ LEAF(relocate_new_kernel)
+ PTR_L a0, arg0
+ PTR_L a1, arg1
+@@ -155,9 +157,3 @@ EXPORT(kexec_start_address)
+ EXPORT(kexec_indirection_page)
+ PTR 0
+ .size kexec_indirection_page, PTRSIZE
+-
+-relocate_new_kernel_end:
+-
+-EXPORT(relocate_new_kernel_size)
+- PTR relocate_new_kernel_end - relocate_new_kernel
+- .size relocate_new_kernel_size, PTRSIZE
+--- a/arch/mips/kernel/vmlinux.lds.S
++++ b/arch/mips/kernel/vmlinux.lds.S
+@@ -58,6 +58,10 @@ SECTIONS
+ *(.text.*)
+ *(.fixup)
+ *(.gnu.warning)
++ __start___kexec_relocate = .;
++ KEEP(*(.kexec.relocate))
++ KEEP(*(.__kexec.relocate))
++ __end___kexec_relocate = .;
+ } :text = 0
+ _etext = .; /* End of text section */
+
--- /dev/null
+From 49d07a29653b1f2c6ae273b3d8fe93d981f43004 Mon Sep 17 00:00:00 2001
+From: Wu Zhangjin <wuzhangjin@gmail.com>
+Date: Wed, 12 Jan 2011 20:59:32 +0000
+Subject: MIPS: Kexec: Init the arguments for the new kernel image
+
+Whenever the kexec-tools pass the command lines to the new kernel image,
+init the arguments as the ones for the 1st kernel image. This fixed the
+booting failure of Kexec on YeeLoong.
+
+Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
+---
+--- a/arch/mips/kernel/machine_kexec.c
++++ b/arch/mips/kernel/machine_kexec.c
+@@ -10,6 +10,7 @@
+ #include <linux/mm.h>
+ #include <linux/delay.h>
+
++#include <asm/bootinfo.h>
+ #include <asm/cacheflush.h>
+ #include <asm/page.h>
+
+@@ -21,9 +22,30 @@ void (*relocated_kexec_smp_wait) (void *
+ atomic_t kexec_ready_to_reboot = ATOMIC_INIT(0);
+ #endif
+
++static void machine_kexec_init_args(void)
++{
++ kexec_args[0] = fw_arg0;
++ kexec_args[1] = fw_arg1;
++ kexec_args[2] = fw_arg2;
++ kexec_args[3] = fw_arg3;
++
++ pr_info("kexec_args[0] (argc): %lu\n", kexec_args[0]);
++ pr_info("kexec_args[1] (argv): %p\n", (void *)kexec_args[1]);
++ pr_info("kexec_args[2] (env ): %p\n", (void *)kexec_args[2]);
++ pr_info("kexec_args[3] (desc): %p\n", (void *)kexec_args[3]);
++}
++
+ int
+ machine_kexec_prepare(struct kimage *kimage)
+ {
++ /*
++ * Whenever arguments passed from kexec-tools, Init the arguments as
++ * the original ones to avoid booting failure.
++ *
++ * This can be overrided by _machine_kexec_prepare().
++ */
++ machine_kexec_init_args();
++
+ if (_machine_kexec_prepare)
+ return _machine_kexec_prepare(kimage);
+ return 0;
--- /dev/null
+From 240c76841b26f1b09aaced33414ee1d08b6454cf Mon Sep 17 00:00:00 2001
+From: Wu Zhangjin <wuzhangjin@gmail.com>
+Date: Sat, 15 Jan 2011 12:46:03 +0000
+Subject: MIPS: Get kernel parameters from kexec-tools
+
+Before, we simply use the command lines from the original bootloader,
+but it is not convenient. Now, we accept the kernel parameters from the
+--command-line or --append option of the kexec-tools. But If not
+--command-line or --apend option indicated, will fall back to use the
+ones from the original bootloader.
+
+Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
+---
+--- a/arch/mips/kernel/machine_kexec.c
++++ b/arch/mips/kernel/machine_kexec.c
+@@ -13,6 +13,7 @@
+ #include <asm/bootinfo.h>
+ #include <asm/cacheflush.h>
+ #include <asm/page.h>
++#include <asm/uaccess.h>
+
+ int (*_machine_kexec_prepare)(struct kimage *) = NULL;
+ void (*_machine_kexec_shutdown)(void) = NULL;
+@@ -35,6 +36,56 @@ static void machine_kexec_init_args(void
+ pr_info("kexec_args[3] (desc): %p\n", (void *)kexec_args[3]);
+ }
+
++#define ARGV_MAX_ARGS (COMMAND_LINE_SIZE / 15)
++
++int machine_kexec_pass_args(struct kimage *image)
++{
++ int i, argc = 0;
++ char *bootloader = "kexec";
++ int *kexec_argv = (int *)kexec_args[1];
++
++ for (i = 0; i < image->nr_segments; i++) {
++ if (!strncmp(bootloader, (char *)image->segment[i].buf,
++ strlen(bootloader))) {
++ /*
++ * convert command line string to array
++ * of parameters (as bootloader does).
++ */
++ /*
++ * Note: we do treat the 1st string "kexec" as an
++ * argument ;-) so, argc here is 1.
++ */
++ char *str = (char *)image->segment[i].buf;
++ char *ptr = strchr(str, ' ');
++ char *kbuf = (char *)kexec_argv[0];
++ /* Whenever --command-line or --append used, "kexec" is copied */
++ argc = 1;
++ /* Parse the offset */
++ while (ptr && (ARGV_MAX_ARGS > argc)) {
++ *ptr = '\0';
++ if (ptr[1] != ' ' && ptr[1] != '\0') {
++ int offt = (int)(ptr - str + 1);
++ kexec_argv[argc] = (int)kbuf + offt;
++ argc++;
++ }
++ ptr = strchr(ptr + 1, ' ');
++ }
++ if (argc > 1) {
++ /* Copy to kernel space */
++ copy_from_user(kbuf, (char *)image->segment[i].buf, image->segment[i].bufsz);
++ fw_arg0 = kexec_args[0] = argc;
++ }
++ break;
++ }
++ }
++
++ pr_info("argc = %lu\n", kexec_args[0]);
++ for (i = 0; i < kexec_args[0]; i++)
++ pr_info("argv[%d] = %p, %s\n", i, (char *)kexec_argv[i], (char *)kexec_argv[i]);
++
++ return 0;
++}
++
+ int
+ machine_kexec_prepare(struct kimage *kimage)
+ {
+@@ -45,6 +96,7 @@ machine_kexec_prepare(struct kimage *kim
+ * This can be overrided by _machine_kexec_prepare().
+ */
+ machine_kexec_init_args();
++ machine_kexec_pass_args(kimage);
+
+ if (_machine_kexec_prepare)
+ return _machine_kexec_prepare(kimage);
--- /dev/null
+From 4aded085fa0057a9a1e1dcec631f950307360c1f Mon Sep 17 00:00:00 2001
+From: Wu Zhangjin <wuzhangjin@gmail.com>
+Date: Tue, 11 Jan 2011 13:46:19 +0000
+Subject: MIPS: Fix compiling failure of relocate_kernel.S
+
+The following errors is fixed with the help of <asm/asm_nosec.h>. for
+this file need to put different symbols in the same section, the
+original LEAF, NESTED and EXPORT (without explicit section indication)
+must be used, <asm/asm_nosec.h> does it.
+
+arch/mips/kernel/relocate_kernel.S: Assembler messages:
+arch/mips/kernel/relocate_kernel.S:162: Error: operation combines symbols in different segments
+
+Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
+---
+(limited to 'arch/mips/kernel')
+
+--- a/arch/mips/kernel/relocate_kernel.S
++++ b/arch/mips/kernel/relocate_kernel.S
+@@ -7,6 +7,7 @@
+ */
+
+ #include <asm/asm.h>
++#include <asm/asm_nosec.h>
+ #include <asm/asmmacro.h>
+ #include <asm/regdef.h>
+ #include <asm/page.h>
+--- /dev/null
++++ b/arch/mips/include/asm/asm_nosec.h
+@@ -0,0 +1,53 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 1995, 1996, 1997, 1999, 2001 by Ralf Baechle
++ * Copyright (C) 1999 by Silicon Graphics, Inc.
++ * Copyright (C) 2001 MIPS Technologies, Inc.
++ * Copyright (C) 2002 Maciej W. Rozycki
++ * Copyright (C) 2010 Wu Zhangjin <wuzhangjin@gmail.com>
++ *
++ * Derive from <asm/asm.h>
++ *
++ * Override the macros without -ffunction-sections and -fdata-sections support.
++ * If several functions or data must be put in the same section, please include
++ * this header file after the <asm/asm.h> to override the generic definition.
++ */
++
++#ifndef __ASM_ASM_NOSEC_H
++#define __ASM_ASM_NOSEC_H
++
++#undef LEAF
++#undef NESTED
++#undef EXPORT
++
++/*
++ * LEAF - declare leaf routine
++ */
++#define LEAF(symbol) \
++ .globl symbol; \
++ .align 2; \
++ .type symbol, @function; \
++ .ent symbol, 0; \
++symbol: .frame sp, 0, ra
++
++/*
++ * NESTED - declare nested routine entry point
++ */
++#define NESTED(symbol, framesize, rpc) \
++ .globl symbol; \
++ .align 2; \
++ .type symbol, @function; \
++ .ent symbol, 0; \
++symbol: .frame sp, framesize, rpc
++
++/*
++ * EXPORT - export definition of symbol
++ */
++#define EXPORT(symbol) \
++ .globl symbol; \
++symbol:
++
++#endif /* __ASM_ASM_NOSEC_H */
--- /dev/null
+--- a/arch/mips/kernel/machine_kexec.c
++++ b/arch/mips/kernel/machine_kexec.c
+@@ -23,67 +23,104 @@ void (*relocated_kexec_smp_wait) (void *
+ atomic_t kexec_ready_to_reboot = ATOMIC_INIT(0);
+ #endif
+
+-static void machine_kexec_init_args(void)
++#define KEXEC_MIPS_ARGV_BUF_SIZE COMMAND_LINE_SIZE
++#define KEXEC_MIPS_ARGV_MAX_ARGS (COMMAND_LINE_SIZE / 15)
++
++char kexec_argv_buf[KEXEC_MIPS_ARGV_BUF_SIZE] __kexec;
++char *kexec_argv[KEXEC_MIPS_ARGV_MAX_ARGS] __kexec;
++
++static void
++machine_kexec_print_args(void)
+ {
+- kexec_args[0] = fw_arg0;
+- kexec_args[1] = fw_arg1;
+- kexec_args[2] = fw_arg2;
+- kexec_args[3] = fw_arg3;
++ int i;
+
+ pr_info("kexec_args[0] (argc): %lu\n", kexec_args[0]);
+ pr_info("kexec_args[1] (argv): %p\n", (void *)kexec_args[1]);
+ pr_info("kexec_args[2] (env ): %p\n", (void *)kexec_args[2]);
+ pr_info("kexec_args[3] (desc): %p\n", (void *)kexec_args[3]);
+-}
+
+-#define ARGV_MAX_ARGS (COMMAND_LINE_SIZE / 15)
++ for (i = 0; i < kexec_args[0]; i++)
++ pr_info("kexec_argv[%d] = %p, %s\n", i,
++ (char *)kexec_argv[i], (char *)kexec_argv[i]);
++}
+
+-int machine_kexec_pass_args(struct kimage *image)
++static void
++machine_kexec_init_argv(struct kimage *image)
+ {
+- int i, argc = 0;
+- char *bootloader = "kexec";
+- int *kexec_argv = (int *)kexec_args[1];
++ void __user *buf = NULL;
++ size_t bufsz;
++ size_t size;
++ int i;
+
++ bufsz = 0;
+ for (i = 0; i < image->nr_segments; i++) {
+- if (!strncmp(bootloader, (char *)image->segment[i].buf,
+- strlen(bootloader))) {
+- /*
+- * convert command line string to array
+- * of parameters (as bootloader does).
+- */
+- /*
+- * Note: we do treat the 1st string "kexec" as an
+- * argument ;-) so, argc here is 1.
+- */
+- char *str = (char *)image->segment[i].buf;
+- char *ptr = strchr(str, ' ');
+- char *kbuf = (char *)kexec_argv[0];
+- /* Whenever --command-line or --append used, "kexec" is copied */
+- argc = 1;
+- /* Parse the offset */
+- while (ptr && (ARGV_MAX_ARGS > argc)) {
+- *ptr = '\0';
+- if (ptr[1] != ' ' && ptr[1] != '\0') {
+- int offt = (int)(ptr - str + 1);
+- kexec_argv[argc] = (int)kbuf + offt;
+- argc++;
+- }
+- ptr = strchr(ptr + 1, ' ');
+- }
+- if (argc > 1) {
+- /* Copy to kernel space */
+- copy_from_user(kbuf, (char *)image->segment[i].buf, image->segment[i].bufsz);
+- fw_arg0 = kexec_args[0] = argc;
+- }
+- break;
++ struct kexec_segment *seg;
++
++ seg = &image->segment[i];
++ if (seg->bufsz < 6)
++ continue;
++
++ if (strncmp((char *) seg->buf, "kexec", 5))
++ continue;
++
++ /* don't copy "kexec" */
++ buf = seg->buf + 5;
++ bufsz = seg->bufsz - 5;
++ break;
++ }
++
++ if (!buf)
++ return;
++
++ size = KEXEC_MIPS_ARGV_BUF_SIZE - 1;
++ size = min(size, bufsz);
++ if (size < bufsz)
++ pr_warn("kexec command line truncated to %zd bytes\n", size);
++
++ /* Copy to kernel space */
++ copy_from_user(kexec_argv_buf, buf, size);
++}
++
++static void
++machine_kexec_parse_argv(struct kimage *image)
++{
++ char *reboot_code_buffer;
++ int reloc_delta;
++ char *ptr;
++ int argc;
++ int i;
++
++ ptr = kexec_argv_buf;
++ argc = 0;
++
++ /*
++ * convert command line string to array of parameters
++ * (as bootloader does).
++ */
++ while (ptr && *ptr && (KEXEC_MIPS_ARGV_MAX_ARGS > argc)) {
++ if (*ptr == ' ') {
++ *ptr++ = '\0';
++ continue;
+ }
++
++ kexec_argv[argc++] = ptr;
++ ptr = strchr(ptr, ' ');
+ }
+
+- pr_info("argc = %lu\n", kexec_args[0]);
+- for (i = 0; i < kexec_args[0]; i++)
+- pr_info("argv[%d] = %p, %s\n", i, (char *)kexec_argv[i], (char *)kexec_argv[i]);
++ if (!argc)
++ return;
+
+- return 0;
++ kexec_args[0] = argc;
++ kexec_args[1] = (unsigned long)kexec_argv;
++ kexec_args[2] = 0;
++ kexec_args[3] = 0;
++
++ reboot_code_buffer = page_address(image->control_code_page);
++ reloc_delta = reboot_code_buffer - (char *) &__start___kexec_relocate;
++
++ kexec_args[1] += reloc_delta;
++ for (i = 0; i < argc; i++)
++ kexec_argv[i] += reloc_delta;
+ }
+
+ int
+@@ -95,8 +132,14 @@ machine_kexec_prepare(struct kimage *kim
+ *
+ * This can be overrided by _machine_kexec_prepare().
+ */
+- machine_kexec_init_args();
+- machine_kexec_pass_args(kimage);
++
++ kexec_args[0] = fw_arg0;
++ kexec_args[1] = fw_arg1;
++ kexec_args[2] = fw_arg2;
++ kexec_args[3] = fw_arg3;
++
++ machine_kexec_init_argv(kimage);
++ machine_kexec_parse_argv(kimage);
+
+ if (_machine_kexec_prepare)
+ return _machine_kexec_prepare(kimage);
+@@ -152,11 +195,13 @@ machine_kexec(struct kimage *image)
+ pr_info("kexec_indirection_page = %p\n",
+ (void *)kexec_indirection_page);
+
++ pr_info("Copy kexec_relocate section from %p to reboot_code_buffer: %p\n",
++ &__start___kexec_relocate, (void *)reboot_code_buffer);
++
+ memcpy((void *)reboot_code_buffer, &__start___kexec_relocate,
+ kexec_relocate_size);
+
+- pr_info("Copy kexec_relocate section from %p to reboot_code_buffer: %p\n",
+- &__start___kexec_relocate, (void *)reboot_code_buffer);
++ machine_kexec_print_args();
+
+ /*
+ * The generic kexec code builds a page list with physical
--- /dev/null
+--- a/kernel/module.c
++++ b/kernel/module.c
+@@ -2378,12 +2378,15 @@ static void dynamic_debug_remove(struct
+
+ void * __weak module_alloc(unsigned long size)
+ {
+- return size == 0 ? NULL : vmalloc_exec(size);
++ return vmalloc_exec(size);
+ }
+
+ static void *module_alloc_update_bounds(unsigned long size)
+ {
+- void *ret = module_alloc(size);
++ void *ret = NULL;
++
++ if (size)
++ ret = module_alloc(size);
+
+ if (ret) {
+ mutex_lock(&module_mutex);
--- /dev/null
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -23,6 +23,14 @@ config MTD_TESTS
+ WARNING: some of the tests will ERASE entire MTD device which they
+ test. Do not use these tests unless you really know what you do.
+
++config MTD_ROOTFS_ROOT_DEV
++ bool "Automatically set 'rootfs' partition to be root filesystem"
++ default y
++
++config MTD_ROOTFS_SPLIT
++ bool "Automatically split 'rootfs' partition for squashfs"
++ default y
++
+ config MTD_REDBOOT_PARTS
+ tristate "RedBoot partition table parsing"
+ ---help---
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -29,6 +29,8 @@
+ #include <linux/kmod.h>
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
++#include <linux/root_dev.h>
++#include <linux/magic.h>
+ #include <linux/err.h>
+
+ #include "mtdcore.h"
+@@ -50,7 +52,7 @@ struct mtd_part {
+ * the pointer to that structure with this macro.
+ */
+ #define PART(x) ((struct mtd_part *)(x))
+-
++#define IS_PART(mtd) (mtd->_read == part_read)
+
+ /*
+ * MTD methods which simply translate the effective address and pass through
+@@ -613,6 +615,155 @@ int mtd_del_partition(struct mtd_info *m
+ }
+ EXPORT_SYMBOL_GPL(mtd_del_partition);
+
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++#define ROOTFS_SPLIT_NAME "rootfs_data"
++#define ROOTFS_REMOVED_NAME "<removed>"
++
++struct squashfs_super_block {
++ __le32 s_magic;
++ __le32 pad0[9];
++ __le64 bytes_used;
++};
++
++
++static int split_squashfs(struct mtd_info *master, int offset, int *split_offset)
++{
++ struct squashfs_super_block sb;
++ int len, ret;
++
++ ret = mtd_read(master, offset, sizeof(sb), &len, (void *) &sb);
++ if (ret || (len != sizeof(sb))) {
++ printk(KERN_ALERT "split_squashfs: error occured while reading "
++ "from \"%s\"\n", master->name);
++ return -EINVAL;
++ }
++
++ if (SQUASHFS_MAGIC != le32_to_cpu(sb.s_magic) ) {
++ printk(KERN_ALERT "split_squashfs: no squashfs found in \"%s\"\n",
++ master->name);
++ *split_offset = 0;
++ return 0;
++ }
++
++ if (le64_to_cpu((sb.bytes_used)) <= 0) {
++ printk(KERN_ALERT "split_squashfs: squashfs is empty in \"%s\"\n",
++ master->name);
++ *split_offset = 0;
++ return 0;
++ }
++
++ len = (u32) le64_to_cpu(sb.bytes_used);
++ len += (offset & 0x000fffff);
++ len += (master->erasesize - 1);
++ len &= ~(master->erasesize - 1);
++ len -= (offset & 0x000fffff);
++ *split_offset = offset + len;
++
++ return 0;
++}
++
++static int split_rootfs_data(struct mtd_info *master, struct mtd_info *rpart, const struct mtd_partition *part)
++{
++ struct mtd_partition *dpart;
++ struct mtd_part *slave = NULL;
++ struct mtd_part *spart;
++ int ret, split_offset = 0;
++
++ spart = PART(rpart);
++ ret = split_squashfs(master, spart->offset, &split_offset);
++ if (ret)
++ return ret;
++
++ if (split_offset <= 0)
++ return 0;
++
++ dpart = kmalloc(sizeof(*part)+sizeof(ROOTFS_SPLIT_NAME)+1, GFP_KERNEL);
++ if (dpart == NULL) {
++ printk(KERN_INFO "split_squashfs: no memory for partition \"%s\"\n",
++ ROOTFS_SPLIT_NAME);
++ return -ENOMEM;
++ }
++
++ memcpy(dpart, part, sizeof(*part));
++ dpart->name = (unsigned char *)&dpart[1];
++ strcpy(dpart->name, ROOTFS_SPLIT_NAME);
++
++ dpart->size = rpart->size - (split_offset - spart->offset);
++ dpart->offset = split_offset;
++
++ if (dpart == NULL)
++ return 1;
++
++ printk(KERN_INFO "mtd: partition \"%s\" created automatically, ofs=%llX, len=%llX \n",
++ ROOTFS_SPLIT_NAME, dpart->offset, dpart->size);
++
++ slave = allocate_partition(master, dpart, 0, split_offset);
++ if (IS_ERR(slave))
++ return PTR_ERR(slave);
++ mutex_lock(&mtd_partitions_mutex);
++ list_add(&slave->list, &mtd_partitions);
++ mutex_unlock(&mtd_partitions_mutex);
++
++ add_mtd_device(&slave->mtd);
++
++ rpart->split = &slave->mtd;
++
++ return 0;
++}
++
++static int refresh_rootfs_split(struct mtd_info *mtd)
++{
++ struct mtd_partition tpart;
++ struct mtd_part *part;
++ char *name;
++ //int index = 0;
++ int offset, size;
++ int ret;
++
++ part = PART(mtd);
++
++ /* check for the new squashfs offset first */
++ ret = split_squashfs(part->master, part->offset, &offset);
++ if (ret)
++ return ret;
++
++ if ((offset > 0) && !mtd->split) {
++ printk(KERN_INFO "%s: creating new split partition for \"%s\"\n", __func__, mtd->name);
++ /* if we don't have a rootfs split partition, create a new one */
++ tpart.name = (char *) mtd->name;
++ tpart.size = mtd->size;
++ tpart.offset = part->offset;
++
++ return split_rootfs_data(part->master, &part->mtd, &tpart);
++ } else if ((offset > 0) && mtd->split) {
++ /* update the offsets of the existing partition */
++ size = mtd->size + part->offset - offset;
++
++ part = PART(mtd->split);
++ part->offset = offset;
++ part->mtd.size = size;
++ printk(KERN_INFO "%s: %s partition \"" ROOTFS_SPLIT_NAME "\", offset: 0x%06x (0x%06x)\n",
++ __func__, (!strcmp(part->mtd.name, ROOTFS_SPLIT_NAME) ? "updating" : "creating"),
++ (u32) part->offset, (u32) part->mtd.size);
++ name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
++ strcpy(name, ROOTFS_SPLIT_NAME);
++ part->mtd.name = name;
++ } else if ((offset <= 0) && mtd->split) {
++ printk(KERN_INFO "%s: removing partition \"%s\"\n", __func__, mtd->split->name);
++
++ /* mark existing partition as removed */
++ part = PART(mtd->split);
++ name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
++ strcpy(name, ROOTFS_REMOVED_NAME);
++ part->mtd.name = name;
++ part->offset = 0;
++ part->mtd.size = 0;
++ }
++
++ return 0;
++}
++#endif /* CONFIG_MTD_ROOTFS_SPLIT */
++
+ /*
+ * This function, given a master MTD object and a partition table, creates
+ * and registers slave MTD objects which are bound to the master according to
+@@ -629,6 +780,9 @@ int add_mtd_partitions(struct mtd_info *
+ struct mtd_part *slave;
+ uint64_t cur_offset = 0;
+ int i;
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++ int ret;
++#endif
+
+ printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
+
+@@ -643,12 +797,53 @@ int add_mtd_partitions(struct mtd_info *
+
+ add_mtd_device(&slave->mtd);
+
++ if (!strcmp(parts[i].name, "rootfs")) {
++#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
++ if (ROOT_DEV == 0) {
++ printk(KERN_NOTICE "mtd: partition \"rootfs\" "
++ "set to be root filesystem\n");
++ ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, slave->mtd.index);
++ }
++#endif
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++ ret = split_rootfs_data(master, &slave->mtd, &parts[i]);
++ /* if (ret == 0)
++ * j++; */
++#endif
++ }
++
+ cur_offset = slave->offset + slave->mtd.size;
+ }
+
+ return 0;
+ }
+
++int mtd_device_refresh(struct mtd_info *mtd)
++{
++ int ret = 0;
++
++ if (IS_PART(mtd)) {
++ struct mtd_part *part;
++ struct mtd_info *master;
++
++ part = PART(mtd);
++ master = part->master;
++ if (master->refresh_device)
++ ret = master->refresh_device(master);
++ }
++
++ if (!ret && mtd->refresh_device)
++ ret = mtd->refresh_device(mtd);
++
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++ if (!ret && IS_PART(mtd) && !strcmp(mtd->name, "rootfs"))
++ refresh_rootfs_split(mtd);
++#endif
++
++ return 0;
++}
++EXPORT_SYMBOL_GPL(mtd_device_refresh);
++
+ static DEFINE_SPINLOCK(part_parser_lock);
+ static LIST_HEAD(part_parsers);
+
+--- a/drivers/mtd/mtdchar.c
++++ b/drivers/mtd/mtdchar.c
+@@ -1012,6 +1012,12 @@ static int mtdchar_ioctl(struct file *fi
+ break;
+ }
+
++ case MTDREFRESH:
++ {
++ ret = mtd_device_refresh(mtd);
++ break;
++ }
++
+ default:
+ ret = -ENOTTY;
+ }
+--- a/include/linux/mtd/mtd.h
++++ b/include/linux/mtd/mtd.h
+@@ -114,6 +114,7 @@ struct nand_ecclayout {
+
+ struct module; /* only needed for owner field in mtd_info */
+
++struct mtd_info;
+ struct mtd_info {
+ u_char type;
+ uint32_t flags;
+@@ -226,6 +227,9 @@ struct mtd_info {
+ int (*_block_markbad) (struct mtd_info *mtd, loff_t ofs);
+ int (*_suspend) (struct mtd_info *mtd);
+ void (*_resume) (struct mtd_info *mtd);
++ int (*refresh_device)(struct mtd_info *mtd);
++ struct mtd_info *split;
++
+ /*
+ * If the driver is something smart, like UBI, it may need to maintain
+ * its own reference counting. The below functions are only for driver.
+@@ -368,6 +372,7 @@ extern int mtd_device_parse_register(str
+ int defnr_parts);
+ #define mtd_device_register(master, parts, nr_parts) \
+ mtd_device_parse_register(master, NULL, NULL, parts, nr_parts)
++extern int mtd_device_refresh(struct mtd_info *master);
+ extern int mtd_device_unregister(struct mtd_info *master);
+ extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
+ extern int __get_mtd_device(struct mtd_info *mtd);
+--- a/include/linux/mtd/partitions.h
++++ b/include/linux/mtd/partitions.h
+@@ -36,12 +36,14 @@
+ * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
+ */
+
++struct mtd_partition;
+ struct mtd_partition {
+ char *name; /* identifier string */
+ uint64_t size; /* partition size */
+ uint64_t offset; /* offset within the master MTD space */
+ uint32_t mask_flags; /* master MTD flags to mask out for this partition */
+ struct nand_ecclayout *ecclayout; /* out of band layout for this partition (NAND only) */
++ int (*refresh_partition)(struct mtd_info *);
+ };
+
+ #define MTDPART_OFS_RETAIN (-3)
+--- a/include/uapi/mtd/mtd-abi.h
++++ b/include/uapi/mtd/mtd-abi.h
+@@ -202,6 +202,7 @@ struct otp_info {
+ * without OOB, e.g., NOR flash.
+ */
+ #define MEMWRITE _IOWR('M', 24, struct mtd_write_req)
++#define MTDREFRESH _IO('M', 50)
+
+ /*
+ * Obsolete legacy interface. Keep it in order not to break userspace
--- /dev/null
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -35,6 +35,8 @@
+
+ #include "mtdcore.h"
+
++#define MTD_ERASE_PARTIAL 0x8000 /* partition only covers parts of an erase block */
++
+ /* Our partition linked list */
+ static LIST_HEAD(mtd_partitions);
+ static DEFINE_MUTEX(mtd_partitions_mutex);
+@@ -230,13 +232,60 @@ static int part_erase(struct mtd_info *m
+ struct mtd_part *part = PART(mtd);
+ int ret;
+
++
++ instr->partial_start = false;
++ if (mtd->flags & MTD_ERASE_PARTIAL) {
++ size_t readlen = 0;
++ u64 mtd_ofs;
++
++ instr->erase_buf = kmalloc(part->master->erasesize, GFP_ATOMIC);
++ if (!instr->erase_buf)
++ return -ENOMEM;
++
++ mtd_ofs = part->offset + instr->addr;
++ instr->erase_buf_ofs = do_div(mtd_ofs, part->master->erasesize);
++
++ if (instr->erase_buf_ofs > 0) {
++ instr->addr -= instr->erase_buf_ofs;
++ ret = mtd_read(part->master,
++ instr->addr + part->offset,
++ part->master->erasesize,
++ &readlen, instr->erase_buf);
++
++ instr->partial_start = true;
++ } else {
++ mtd_ofs = part->offset + part->mtd.size;
++ instr->erase_buf_ofs = part->master->erasesize -
++ do_div(mtd_ofs, part->master->erasesize);
++
++ if (instr->erase_buf_ofs > 0) {
++ instr->len += instr->erase_buf_ofs;
++ ret = mtd_read(part->master,
++ part->offset + instr->addr +
++ instr->len - part->master->erasesize,
++ part->master->erasesize, &readlen,
++ instr->erase_buf);
++ } else {
++ ret = 0;
++ }
++ }
++ if (ret < 0) {
++ kfree(instr->erase_buf);
++ return ret;
++ }
++
++ }
++
+ instr->addr += part->offset;
+ ret = part->master->_erase(part->master, instr);
+ if (ret) {
+ if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
+ instr->fail_addr -= part->offset;
+ instr->addr -= part->offset;
++ if (mtd->flags & MTD_ERASE_PARTIAL)
++ kfree(instr->erase_buf);
+ }
++
+ return ret;
+ }
+
+@@ -244,7 +293,25 @@ void mtd_erase_callback(struct erase_inf
+ {
+ if (instr->mtd->_erase == part_erase) {
+ struct mtd_part *part = PART(instr->mtd);
++ size_t wrlen = 0;
+
++ if (instr->mtd->flags & MTD_ERASE_PARTIAL) {
++ if (instr->partial_start) {
++ part->master->_write(part->master,
++ instr->addr, instr->erase_buf_ofs,
++ &wrlen, instr->erase_buf);
++ instr->addr += instr->erase_buf_ofs;
++ } else {
++ instr->len -= instr->erase_buf_ofs;
++ part->master->_write(part->master,
++ instr->addr + instr->len,
++ instr->erase_buf_ofs, &wrlen,
++ instr->erase_buf +
++ part->master->erasesize -
++ instr->erase_buf_ofs);
++ }
++ kfree(instr->erase_buf);
++ }
+ if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
+ instr->fail_addr -= part->offset;
+ instr->addr -= part->offset;
+@@ -504,18 +571,24 @@ static struct mtd_part *allocate_partiti
+ if ((slave->mtd.flags & MTD_WRITEABLE) &&
+ mtd_mod_by_eb(slave->offset, &slave->mtd)) {
+ /* Doesn't start on a boundary of major erase size */
+- /* FIXME: Let it be writable if it is on a boundary of
+- * _minor_ erase size though */
+- slave->mtd.flags &= ~MTD_WRITEABLE;
+- printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
+- part->name);
++ slave->mtd.flags |= MTD_ERASE_PARTIAL;
++ if (((u32) slave->mtd.size) > master->erasesize)
++ slave->mtd.flags &= ~MTD_WRITEABLE;
++ else
++ slave->mtd.erasesize = slave->mtd.size;
+ }
+ if ((slave->mtd.flags & MTD_WRITEABLE) &&
+- mtd_mod_by_eb(slave->mtd.size, &slave->mtd)) {
+- slave->mtd.flags &= ~MTD_WRITEABLE;
+- printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
+- part->name);
++ mtd_mod_by_eb(slave->offset + slave->mtd.size, &slave->mtd)) {
++ slave->mtd.flags |= MTD_ERASE_PARTIAL;
++
++ if ((u32) slave->mtd.size > master->erasesize)
++ slave->mtd.flags &= ~MTD_WRITEABLE;
++ else
++ slave->mtd.erasesize = slave->mtd.size;
+ }
++ if ((slave->mtd.flags & (MTD_ERASE_PARTIAL|MTD_WRITEABLE)) == MTD_ERASE_PARTIAL)
++ printk(KERN_WARNING"mtd: partition \"%s\" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only\n",
++ part->name);
+
+ slave->mtd.ecclayout = master->ecclayout;
+ slave->mtd.ecc_strength = master->ecc_strength;
+--- a/include/linux/mtd/mtd.h
++++ b/include/linux/mtd/mtd.h
+@@ -58,6 +58,10 @@ struct erase_info {
+ u_long priv;
+ u_char state;
+ struct erase_info *next;
++
++ u8 *erase_buf;
++ u32 erase_buf_ofs;
++ bool partial_start;
+ };
+
+ struct mtd_erase_region_info {
--- /dev/null
+--- a/include/linux/mtd/partitions.h
++++ b/include/linux/mtd/partitions.h
+@@ -35,6 +35,7 @@
+ * Note: writeable partitions require their size and offset be
+ * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
+ */
++struct mtd_info;
+
+ struct mtd_partition;
+ struct mtd_partition {
+@@ -52,7 +53,6 @@ struct mtd_partition {
+ #define MTDPART_SIZ_FULL (0)
+
+
+-struct mtd_info;
+ struct device_node;
+
+ /**
--- /dev/null
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -265,14 +265,21 @@ static int parse_redboot_partitions(stru
+ #endif
+ names += strlen(names)+1;
+
+-#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ if(fl->next && fl->img->flash_base + fl->img->size + master->erasesize <= fl->next->img->flash_base) {
+- i++;
+- parts[i].offset = parts[i-1].size + parts[i-1].offset;
+- parts[i].size = fl->next->img->flash_base - parts[i].offset;
+- parts[i].name = nullname;
+- }
++ if (!strcmp(parts[i].name, "rootfs")) {
++ parts[i].size = fl->next->img->flash_base;
++ parts[i].size &= ~(master->erasesize - 1);
++ parts[i].size -= parts[i].offset;
++#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
++ nrparts--;
++ } else {
++ i++;
++ parts[i].offset = parts[i-1].size + parts[i-1].offset;
++ parts[i].size = fl->next->img->flash_base - parts[i].offset;
++ parts[i].name = nullname;
+ #endif
++ }
++ }
+ tmp_fl = fl;
+ fl = fl->next;
+ kfree(tmp_fl);
--- /dev/null
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -163,6 +163,22 @@ config MTD_BCM47XX_PARTS
+ This provides partitions parser for devices based on BCM47xx
+ boards.
+
++config MTD_MYLOADER_PARTS
++ tristate "MyLoader partition parsing"
++ depends on ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX || ATH79
++ ---help---
++ MyLoader is a bootloader which allows the user to define partitions
++ in flash devices, by putting a table in the second erase block
++ on the device, similar to a partition table. This table gives the
++ offsets and lengths of the user defined partitions.
++
++ If you need code which can detect and parse these tables, and
++ register MTD 'partitions' corresponding to each image detected,
++ enable this option.
++
++ You will still need the parsing functions to be called by the driver
++ for your particular device. It won't happen automatically.
++
+ comment "User Modules And Translation Layers"
+
+ config MTD_CHAR
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
+ obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
+ obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
+ obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
++obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+
+ # 'Users' - code which presents functionality to userspace.
+ obj-$(CONFIG_MTD_CHAR) += mtdchar.o
--- /dev/null
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -14,6 +14,7 @@
+ #include <linux/list.h>
+ #include <linux/init.h>
+ #include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
+ #include <linux/mutex.h>
+ #include <linux/mount.h>
+ #include <linux/slab.h>
+@@ -208,11 +209,12 @@ static void block2mtd_free_device(struct
+
+
+ /* FIXME: ensure that mtd->size % erase_size == 0 */
+-static struct block2mtd_dev *add_device(char *devname, int erase_size)
++static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname)
+ {
+ const fmode_t mode = FMODE_READ | FMODE_WRITE | FMODE_EXCL;
+ struct block_device *bdev;
+ struct block2mtd_dev *dev;
++ struct mtd_partition *part;
+ char *name;
+
+ if (!devname)
+@@ -251,13 +253,16 @@ static struct block2mtd_dev *add_device(
+
+ /* Setup the MTD structure */
+ /* make the name contain the block device in */
+- name = kasprintf(GFP_KERNEL, "block2mtd: %s", devname);
++ if (!mtdname)
++ mtdname = devname;
++ name = kmalloc(strlen(mtdname) + 1, GFP_KERNEL);
+ if (!name)
+ goto devinit_err;
+
++ strcpy(name, mtdname);
+ dev->mtd.name = name;
+
+- dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
++ dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK & ~(erase_size - 1);
+ dev->mtd.erasesize = erase_size;
+ dev->mtd.writesize = 1;
+ dev->mtd.writebufsize = PAGE_SIZE;
+@@ -270,14 +275,17 @@ static struct block2mtd_dev *add_device(
+ dev->mtd.priv = dev;
+ dev->mtd.owner = THIS_MODULE;
+
+- if (mtd_device_register(&dev->mtd, NULL, 0)) {
++ part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
++ part->name = name;
++ part->offset = 0;
++ part->size = dev->mtd.size;
++ if (mtd_device_register(&dev->mtd, part, 1)) {
+ /* Device didn't get added, so free the entry */
+ goto devinit_err;
+ }
+ list_add(&dev->list, &blkmtd_device_list);
+ INFO("mtd%d: [%s] erase_size = %dKiB [%d]", dev->mtd.index,
+- dev->mtd.name + strlen("block2mtd: "),
+- dev->mtd.erasesize >> 10, dev->mtd.erasesize);
++ mtdname, dev->mtd.erasesize >> 10, dev->mtd.erasesize);
+ return dev;
+
+ devinit_err:
+@@ -350,9 +358,9 @@ static char block2mtd_paramline[80 + 12]
+
+ static int block2mtd_setup2(const char *val)
+ {
+- char buf[80 + 12]; /* 80 for device, 12 for erase size */
++ char buf[80 + 12 + 80]; /* 80 for device, 12 for erase size, 80 for name */
+ char *str = buf;
+- char *token[2];
++ char *token[3];
+ char *name;
+ size_t erase_size = PAGE_SIZE;
+ int i, ret;
+@@ -363,7 +371,7 @@ static int block2mtd_setup2(const char *
+ strcpy(str, val);
+ kill_final_newline(str);
+
+- for (i = 0; i < 2; i++)
++ for (i = 0; i < 3; i++)
+ token[i] = strsep(&str, ",");
+
+ if (str)
+@@ -382,8 +390,10 @@ static int block2mtd_setup2(const char *
+ parse_err("illegal erase size");
+ }
+ }
++ if (token[2] && (strlen(token[2]) + 1 > 80))
++ parse_err("mtd device name too long");
+
+- add_device(name, erase_size);
++ add_device(name, erase_size, token[2]);
+
+ return 0;
+ }
+@@ -417,7 +427,7 @@ static int block2mtd_setup(const char *v
+
+
+ module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);
+-MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\"");
++MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>]]\"");
+
+ static int __init block2mtd_init(void)
+ {
+--- a/block/partition-generic.c
++++ b/block/partition-generic.c
+@@ -548,6 +548,7 @@ int invalidate_partitions(struct gendisk
+
+ return 0;
+ }
++EXPORT_SYMBOL(rescan_partitions);
+
+ unsigned char *read_dev_sector(struct block_device *bdev, sector_t n, Sector *p)
+ {
--- /dev/null
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -29,6 +29,8 @@ struct block2mtd_dev {
+ struct block_device *blkdev;
+ struct mtd_info mtd;
+ struct mutex write_mutex;
++ rwlock_t bdev_mutex;
++ char devname[0];
+ };
+
+
+@@ -79,6 +81,12 @@ static int block2mtd_erase(struct mtd_in
+ size_t len = instr->len;
+ int err;
+
++ read_lock(&dev->bdev_mutex);
++ if (!dev->blkdev) {
++ err = -EINVAL;
++ goto done;
++ }
++
+ instr->state = MTD_ERASING;
+ mutex_lock(&dev->write_mutex);
+ err = _block2mtd_erase(dev, from, len);
+@@ -90,6 +98,10 @@ static int block2mtd_erase(struct mtd_in
+ instr->state = MTD_ERASE_DONE;
+
+ mtd_erase_callback(instr);
++
++done:
++ read_unlock(&dev->bdev_mutex);
++
+ return err;
+ }
+
+@@ -101,7 +113,13 @@ static int block2mtd_read(struct mtd_inf
+ struct page *page;
+ int index = from >> PAGE_SHIFT;
+ int offset = from & (PAGE_SIZE-1);
+- int cpylen;
++ int cpylen, err = 0;
++
++ read_lock(&dev->bdev_mutex);
++ if (!dev->blkdev || (from > mtd->size)) {
++ err = -EINVAL;
++ goto done;
++ }
+
+ while (len) {
+ if ((offset + len) > PAGE_SIZE)
+@@ -111,8 +129,10 @@ static int block2mtd_read(struct mtd_inf
+ len = len - cpylen;
+
+ page = page_read(dev->blkdev->bd_inode->i_mapping, index);
+- if (IS_ERR(page))
++ if (IS_ERR(page)) {
+ return PTR_ERR(page);
++ goto done;
++ }
+
+ memcpy(buf, page_address(page) + offset, cpylen);
+ page_cache_release(page);
+@@ -123,7 +143,10 @@ static int block2mtd_read(struct mtd_inf
+ offset = 0;
+ index++;
+ }
+- return 0;
++
++done:
++ read_unlock(&dev->bdev_mutex);
++ return err;
+ }
+
+
+@@ -171,13 +194,22 @@ static int block2mtd_write(struct mtd_in
+ size_t *retlen, const u_char *buf)
+ {
+ struct block2mtd_dev *dev = mtd->priv;
+- int err;
++ int err = 0;
++
++ read_lock(&dev->bdev_mutex);
++ if (!dev->blkdev) {
++ err = -EINVAL;
++ goto done;
++ }
+
+ mutex_lock(&dev->write_mutex);
+ err = _block2mtd_write(dev, buf, to, len, retlen);
+ mutex_unlock(&dev->write_mutex);
+ if (err > 0)
+ err = 0;
++
++done:
++ read_unlock(&dev->bdev_mutex);
+ return err;
+ }
+
+@@ -186,33 +218,110 @@ static int block2mtd_write(struct mtd_in
+ static void block2mtd_sync(struct mtd_info *mtd)
+ {
+ struct block2mtd_dev *dev = mtd->priv;
++ read_lock(&dev->bdev_mutex);
++ if (dev->blkdev)
+ sync_blockdev(dev->blkdev);
++ read_unlock(&dev->bdev_mutex);
++
+ return;
+ }
+
+
++static int _open_bdev(struct block2mtd_dev *dev)
++{
++ const fmode_t mode = FMODE_READ | FMODE_WRITE | FMODE_EXCL;
++ struct block_device *bdev;
++
++ /* Get a handle on the device */
++ bdev = blkdev_get_by_path(dev->devname, mode, dev);
++#ifndef MODULE
++ if (IS_ERR(bdev)) {
++ dev_t devt;
++
++ /* We might not have rootfs mounted at this point. Try
++ to resolve the device name by other means. */
++
++ devt = name_to_dev_t(dev->devname);
++ if (devt)
++ bdev = blkdev_get_by_dev(devt, mode, dev);
++ }
++#endif
++
++ if (IS_ERR(bdev)) {
++ ERROR("error: cannot open device %s", dev->devname);
++ return 1;
++ }
++ dev->blkdev = bdev;
++
++ if (MAJOR(bdev->bd_dev) == MTD_BLOCK_MAJOR) {
++ ERROR("attempting to use an MTD device as a block device");
++ return 1;
++ }
++
++ return 0;
++}
++
++static void _close_bdev(struct block2mtd_dev *dev)
++{
++ struct block_device *bdev;
++
++ if (!dev->blkdev)
++ return;
++
++ bdev = dev->blkdev;
++ invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping, 0, -1);
++ blkdev_put(dev->blkdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL);
++ dev->blkdev = NULL;
++}
++
+ static void block2mtd_free_device(struct block2mtd_dev *dev)
+ {
+ if (!dev)
+ return;
+
+ kfree(dev->mtd.name);
+-
+- if (dev->blkdev) {
+- invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping,
+- 0, -1);
+- blkdev_put(dev->blkdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL);
+- }
+-
++ _close_bdev(dev);
+ kfree(dev);
+ }
+
+
+-/* FIXME: ensure that mtd->size % erase_size == 0 */
+-static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname)
++static int block2mtd_refresh(struct mtd_info *mtd)
+ {
+- const fmode_t mode = FMODE_READ | FMODE_WRITE | FMODE_EXCL;
++ struct block2mtd_dev *dev = mtd->priv;
+ struct block_device *bdev;
++ dev_t devt;
++ int err = 0;
++
++ /* no other mtd function can run at this point */
++ write_lock(&dev->bdev_mutex);
++
++ /* get the device number for the whole disk */
++ devt = MKDEV(MAJOR(dev->blkdev->bd_dev), 0);
++
++ /* close the old block device */
++ _close_bdev(dev);
++
++ /* open the whole disk, issue a partition rescan, then */
++ bdev = blkdev_get_by_dev(devt, FMODE_WRITE | FMODE_READ, mtd);
++ if (!bdev || !bdev->bd_disk)
++ err = -EINVAL;
++#ifndef CONFIG_MTD_BLOCK2MTD_MODULE
++ else
++ err = rescan_partitions(bdev->bd_disk, bdev);
++#endif
++ if (bdev)
++ blkdev_put(bdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL);
++
++ /* try to open the partition block device again */
++ _open_bdev(dev);
++ write_unlock(&dev->bdev_mutex);
++
++ return err;
++}
++
++/* FIXME: ensure that mtd->size % erase_size == 0 */
++static struct block2mtd_dev *add_device(char *devname, int erase_size, char *mtdname)
++{
+ struct block2mtd_dev *dev;
+ struct mtd_partition *part;
+ char *name;
+@@ -220,36 +329,17 @@ static struct block2mtd_dev *add_device(
+ if (!devname)
+ return NULL;
+
+- dev = kzalloc(sizeof(struct block2mtd_dev), GFP_KERNEL);
++ dev = kzalloc(sizeof(struct block2mtd_dev) + strlen(devname) + 1, GFP_KERNEL);
+ if (!dev)
+ return NULL;
+
+- /* Get a handle on the device */
+- bdev = blkdev_get_by_path(devname, mode, dev);
+-#ifndef MODULE
+- if (IS_ERR(bdev)) {
++ strcpy(dev->devname, devname);
+
+- /* We might not have rootfs mounted at this point. Try
+- to resolve the device name by other means. */
+-
+- dev_t devt = name_to_dev_t(devname);
+- if (devt)
+- bdev = blkdev_get_by_dev(devt, mode, dev);
+- }
+-#endif
+-
+- if (IS_ERR(bdev)) {
+- ERROR("error: cannot open device %s", devname);
+- goto devinit_err;
+- }
+- dev->blkdev = bdev;
+-
+- if (MAJOR(bdev->bd_dev) == MTD_BLOCK_MAJOR) {
+- ERROR("attempting to use an MTD device as a block device");
++ if (_open_bdev(dev))
+ goto devinit_err;
+- }
+
+ mutex_init(&dev->write_mutex);
++ rwlock_init(&dev->bdev_mutex);
+
+ /* Setup the MTD structure */
+ /* make the name contain the block device in */
+@@ -274,6 +364,7 @@ static struct block2mtd_dev *add_device(
+ dev->mtd._read = block2mtd_read;
+ dev->mtd.priv = dev;
+ dev->mtd.owner = THIS_MODULE;
++ dev->mtd.refresh_device = block2mtd_refresh;
+
+ part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
+ part->name = name;
--- /dev/null
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -241,6 +241,7 @@ static int _open_bdev(struct block2mtd_d
+ /* We might not have rootfs mounted at this point. Try
+ to resolve the device name by other means. */
+
++ wait_for_device_probe();
+ devt = name_to_dev_t(dev->devname);
+ if (devt)
+ bdev = blkdev_get_by_dev(devt, mode, dev);
--- /dev/null
+---
+ drivers/mtd/nand/plat_nand.c | 13 ++++++++++++-
+ include/linux/mtd/nand.h | 1 +
+ 2 files changed, 13 insertions(+), 1 deletion(-)
+
+--- a/include/linux/mtd/nand.h
++++ b/include/linux/mtd/nand.h
+@@ -640,6 +640,7 @@ struct platform_nand_chip {
+ unsigned int options;
+ unsigned int bbt_options;
+ const char **part_probe_types;
++ int (*chip_fixup)(struct mtd_info *mtd);
+ };
+
+ /* Keep gcc happy */
+--- a/drivers/mtd/nand/plat_nand.c
++++ b/drivers/mtd/nand/plat_nand.c
+@@ -103,7 +103,18 @@ static int __devinit plat_nand_probe(str
+ }
+
+ /* Scan to find existence of the device */
+- if (nand_scan(&data->mtd, pdata->chip.nr_chips)) {
++ if (nand_scan_ident(&data->mtd, pdata->chip.nr_chips, NULL)) {
++ err = -ENXIO;
++ goto out;
++ }
++
++ if (pdata->chip.chip_fixup) {
++ err = pdata->chip.chip_fixup(&data->mtd);
++ if (err)
++ goto out;
++ }
++
++ if (nand_scan_tail(&data->mtd)) {
+ err = -ENXIO;
+ goto out;
+ }
--- /dev/null
+--- a/drivers/mtd/nand/nand_ecc.c
++++ b/drivers/mtd/nand/nand_ecc.c
+@@ -507,8 +507,7 @@ int __nand_correct_data(unsigned char *b
+ if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1)
+ return 1; /* error in ECC data; no action needed */
+
+- printk(KERN_ERR "uncorrectable error : ");
+- return -1;
++ return -EBADMSG;
+ }
+ EXPORT_SYMBOL(__nand_correct_data);
+
--- /dev/null
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -762,7 +762,7 @@ static int get_chip(struct map_info *map
+ return 0;
+
+ case FL_ERASING:
+- if (!cfip || !(cfip->EraseSuspend & (0x1|0x2)) ||
++ if (1 /* no suspend */ || !cfip || !(cfip->EraseSuspend & (0x1|0x2)) ||
+ !(mode == FL_READY || mode == FL_POINT ||
+ (mode == FL_WRITING && (cfip->EraseSuspend & 0x2))))
+ goto sleep;
--- /dev/null
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -45,6 +45,7 @@
+ #define OPCODE_BE_4K 0x20 /* Erase 4KiB block */
+ #define OPCODE_BE_32K 0x52 /* Erase 32KiB block */
+ #define OPCODE_CHIP_ERASE 0xc7 /* Erase whole flash chip */
++#define OPCODE_BE_4K_PMC 0xd7 /* Erase 4KiB block on PMC chips*/
+ #define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */
+ #define OPCODE_RDID 0x9f /* Read JEDEC ID */
+
+@@ -594,6 +595,7 @@ struct flash_info {
+ u16 flags;
+ #define SECT_4K 0x01 /* OPCODE_BE_4K works uniformly */
+ #define M25P_NO_ERASE 0x02 /* No erase command needed */
++#define SECT_4K_PMC 0x04 /* OPCODE_BE_4K_PMC works uniformly */
+ };
+
+ #define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
+@@ -667,6 +669,10 @@ static const struct spi_device_id m25p_i
+ { "n25q128", INFO(0x20ba18, 0, 64 * 1024, 256, 0) },
+ { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K) },
+
++ /* PMC -- pm25x "blocks" are 32K, sectors are 4K */
++ { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) },
++ { "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K_PMC) },
++
+ /* Spansion -- single (large) sector size only, at least
+ * for the chips listed here (without boot sectors).
+ */
+@@ -907,6 +913,9 @@ static int __devinit m25p_probe(struct s
+ if (info->flags & SECT_4K) {
+ flash->erase_opcode = OPCODE_BE_4K;
+ flash->mtd.erasesize = 4096;
++ } else if (info->flags & SECT_4K_PMC) {
++ flash->erase_opcode = OPCODE_BE_4K_PMC;
++ flash->mtd.erasesize = 4096;
+ } else {
+ flash->erase_opcode = OPCODE_SE;
+ flash->mtd.erasesize = info->sector_size;
--- /dev/null
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -751,6 +751,7 @@ static const struct spi_device_id m25p_i
+ { "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
+ { "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
+ { "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) },
++ { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
+
+ /* Catalyst / On Semiconductor -- non-JEDEC */
+ { "cat25c11", CAT25_INFO( 16, 8, 16, 1) },
--- /dev/null
+From: George Kashperko <george@znau.edu.ua>
+
+Issue map read after Write Buffer Load command to ensure chip is ready
+to receive data.
+Signed-off-by: George Kashperko <george@znau.edu.ua>
+---
+ drivers/mtd/chips/cfi_cmdset_0002.c | 1 +
+ 1 file changed, 1 insertion(+)
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -1480,6 +1480,7 @@ static int __xipram do_write_buffer(stru
+
+ /* Write Buffer Load */
+ map_write(map, CMD(0x25), cmd_adr);
++ (void) map_read(map, cmd_adr);
+
+ chip->state = FL_WRITING_TO_BUFFER;
+
--- /dev/null
+--- a/drivers/mtd/devices/Kconfig
++++ b/drivers/mtd/devices/Kconfig
+@@ -110,6 +110,14 @@ config MTD_SPEAR_SMI
+ help
+ This enable SNOR support on SPEAR platforms using SMI controller
+
++config M25PXX_PREFER_SMALL_SECTOR_ERASE
++ bool "Prefer small sector erase"
++ depends on MTD_M25P80
++ default y
++ help
++ This option enables use of the small erase sectors if that is
++ supported by the flash chip.
++
+ config MTD_SST25L
+ tristate "Support SST25L (non JEDEC) SPI Flash chips"
+ depends on SPI_MASTER
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -84,6 +84,12 @@
+
+ #define JEDEC_MFR(_jedec_id) ((_jedec_id) >> 16)
+
++#ifdef CONFIG_M25PXX_PREFER_SMALL_SECTOR_ERASE
++#define PREFER_SMALL_SECTOR_ERASE 1
++#else
++#define PREFER_SMALL_SECTOR_ERASE 0
++#endif
++
+ /****************************************************************************/
+
+ struct m25p {
+@@ -911,7 +917,7 @@ static int __devinit m25p_probe(struct s
+ flash->mtd._write = m25p80_write;
+
+ /* prefer "small sector" erase if possible */
+- if (info->flags & SECT_4K) {
++ if (PREFER_SMALL_SECTOR_ERASE && (info->flags & SECT_4K)) {
+ flash->erase_opcode = OPCODE_BE_4K;
+ flash->mtd.erasesize = 4096;
+ } else if (info->flags & SECT_4K_PMC) {
--- /dev/null
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -330,7 +330,14 @@ static int part_lock(struct mtd_info *mt
+ static int part_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+ {
+ struct mtd_part *part = PART(mtd);
+- return part->master->_unlock(part->master, ofs + part->offset, len);
++
++ ofs += part->offset;
++ if (mtd->flags & MTD_ERASE_PARTIAL) {
++ /* round up len to next erasesize and round down offset to prev block */
++ len = (mtd_div_by_eb(len, part->master) + 1) * part->master->erasesize;
++ ofs &= ~(part->master->erasesize - 1);
++ }
++ return part->master->_unlock(part->master, ofs, len);
+ }
+
+ static int part_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
--- /dev/null
+--- a/fs/Kconfig
++++ b/fs/Kconfig
+@@ -39,6 +39,7 @@ source "fs/gfs2/Kconfig"
+ source "fs/ocfs2/Kconfig"
+ source "fs/btrfs/Kconfig"
+ source "fs/nilfs2/Kconfig"
++source "fs/yaffs2/Kconfig"
+
+ endif # BLOCK
+
+--- a/fs/Makefile
++++ b/fs/Makefile
+@@ -127,3 +127,5 @@ obj-$(CONFIG_GFS2_FS) += gfs2/
+ obj-y += exofs/ # Multiple modules
+ obj-$(CONFIG_CEPH_FS) += ceph/
+ obj-$(CONFIG_PSTORE) += pstore/
++obj-$(CONFIG_YAFFS_FS) += yaffs2/
++
--- /dev/null
+From 2505e8b0a13d3d5c5bbeaaae4eb889864f44c9df Mon Sep 17 00:00:00 2001
+From: Charles Manning <cdhmanning@gmail.com>
+Date: Thu, 3 Feb 2011 05:55:30 +1300
+Subject: [PATCH] yaffs: Fix directory unlinking in yaffs1 mode
+
+commit 964b3425a71890e6701c830e38b04d8557c04f49 upstream.
+
+Treat both yaffs2 and yaffs1 paths the same.
+
+Signed-off-by: Charles Manning <cdhmanning@gmail.com>
+---
+ yaffs_guts.c | 8 +-------
+ 1 file changed, 1 insertion(+), 7 deletions(-)
+
+--- a/fs/yaffs2/yaffs_guts.c
++++ b/fs/yaffs2/yaffs_guts.c
+@@ -1708,13 +1708,7 @@ static int yaffs_change_obj_name(yaffs_o
+ YBUG();
+ }
+
+- /* TODO: Do we need this different handling for YAFFS2 and YAFFS1?? */
+- if (obj->my_dev->param.is_yaffs2)
+- unlinkOp = (new_dir == obj->my_dev->unlinked_dir);
+- else
+- unlinkOp = (new_dir == obj->my_dev->unlinked_dir
+- && obj->variant_type == YAFFS_OBJECT_TYPE_FILE);
+-
++ unlinkOp = (new_dir == obj->my_dev->unlinked_dir);
+ deleteOp = (new_dir == obj->my_dev->del_dir);
+
+ existingTarget = yaffs_find_by_name(new_dir, new_name);
--- /dev/null
+From c0c289363e84c53b5872f7c0c5069045096dca07 Mon Sep 17 00:00:00 2001
+From: Charles Manning <cdhmanning@gmail.com>
+Date: Wed, 3 Nov 2010 16:01:12 +1300
+Subject: [PATCH] yaffs: Switch from semaphores to mutexes
+
+commit 73c54aa8c1de3f61a4c211cd47431293a6092f18 upstream.
+
+Mutex is faster and init_MUTEX has been deprecated, so we'll just switch
+to mutexes.
+
+Signed-off-by: Charles Manning <cdhmanning@gmail.com>
+---
+ yaffs_linux.h | 2 +-
+ yaffs_vfs.c | 24 ++++++++++++------------
+ yaffs_vfs_multi.c | 26 +++++++++++++-------------
+ 3 files changed, 26 insertions(+), 26 deletions(-)
+
+--- a/fs/yaffs2/yaffs_linux.h
++++ b/fs/yaffs2/yaffs_linux.h
+@@ -25,7 +25,7 @@ struct yaffs_LinuxContext {
+ struct super_block * superBlock;
+ struct task_struct *bgThread; /* Background thread for this device */
+ int bgRunning;
+- struct semaphore grossLock; /* Gross locking semaphore */
++ struct mutex grossLock; /* Gross locking mutex*/
+ __u8 *spareBuffer; /* For mtdif2 use. Don't know the size of the buffer
+ * at compile time so we have to allocate it.
+ */
+--- a/fs/yaffs2/yaffs_vfs_glue.c
++++ b/fs/yaffs2/yaffs_vfs_glue.c
+@@ -515,14 +515,14 @@ static unsigned yaffs_gc_control_callbac
+ static void yaffs_gross_lock(yaffs_dev_t *dev)
+ {
+ T(YAFFS_TRACE_LOCK, (TSTR("yaffs locking %p\n"), current));
+- down(&(yaffs_dev_to_lc(dev)->grossLock));
++ mutex_lock(&(yaffs_dev_to_lc(dev)->grossLock));
+ T(YAFFS_TRACE_LOCK, (TSTR("yaffs locked %p\n"), current));
+ }
+
+ static void yaffs_gross_unlock(yaffs_dev_t *dev)
+ {
+ T(YAFFS_TRACE_LOCK, (TSTR("yaffs unlocking %p\n"), current));
+- up(&(yaffs_dev_to_lc(dev)->grossLock));
++ mutex_unlock(&(yaffs_dev_to_lc(dev)->grossLock));
+ }
+
+ #ifdef YAFFS_COMPILE_EXPORTFS
+@@ -2542,7 +2542,7 @@ static void yaffs_read_inode(struct inod
+ #endif
+
+ static YLIST_HEAD(yaffs_context_list);
+-struct semaphore yaffs_context_lock;
++struct mutex yaffs_context_lock;
+
+ static void yaffs_put_super(struct super_block *sb)
+ {
+@@ -2568,9 +2568,9 @@ static void yaffs_put_super(struct super
+
+ yaffs_gross_unlock(dev);
+
+- down(&yaffs_context_lock);
++ mutex_lock(&yaffs_context_lock);
+ ylist_del_init(&(yaffs_dev_to_lc(dev)->contextList));
+- up(&yaffs_context_lock);
++ mutex_unlock(&yaffs_context_lock);
+
+ if (yaffs_dev_to_lc(dev)->spareBuffer) {
+ YFREE(yaffs_dev_to_lc(dev)->spareBuffer);
+@@ -3016,7 +3016,7 @@ static struct super_block *yaffs_interna
+ param->skip_checkpt_rd = options.skip_checkpoint_read;
+ param->skip_checkpt_wr = options.skip_checkpoint_write;
+
+- down(&yaffs_context_lock);
++ mutex_lock(&yaffs_context_lock);
+ /* Get a mount id */
+ found = 0;
+ for(mount_id=0; ! found; mount_id++){
+@@ -3030,13 +3030,13 @@ static struct super_block *yaffs_interna
+ context->mount_id = mount_id;
+
+ ylist_add_tail(&(yaffs_dev_to_lc(dev)->contextList), &yaffs_context_list);
+- up(&yaffs_context_lock);
++ mutex_unlock(&yaffs_context_lock);
+
+ /* Directory search handling...*/
+ YINIT_LIST_HEAD(&(yaffs_dev_to_lc(dev)->searchContexts));
+ param->remove_obj_fn = yaffs_remove_obj_callback;
+
+- init_MUTEX(&(yaffs_dev_to_lc(dev)->grossLock));
++ mutex_init(&(yaffs_dev_to_lc(dev)->grossLock));
+
+ yaffs_gross_lock(dev);
+
+@@ -3268,7 +3268,7 @@ static int yaffs_proc_read(char *page,
+ else {
+ step-=2;
+
+- down(&yaffs_context_lock);
++ mutex_lock(&yaffs_context_lock);
+
+ /* Locate and print the Nth entry. Order N-squared but N is small. */
+ ylist_for_each(item, &yaffs_context_list) {
+@@ -3287,7 +3287,7 @@ static int yaffs_proc_read(char *page,
+
+ break;
+ }
+- up(&yaffs_context_lock);
++ mutex_unlock(&yaffs_context_lock);
+ }
+
+ return buf - page < count ? buf - page : count;
+@@ -3301,7 +3301,7 @@ static int yaffs_stats_proc_read(char *p
+ char *buf = page;
+ int n = 0;
+
+- down(&yaffs_context_lock);
++ mutex_lock(&yaffs_context_lock);
+
+ /* Locate and print the Nth entry. Order N-squared but N is small. */
+ ylist_for_each(item, &yaffs_context_list) {
+@@ -3317,7 +3317,7 @@ static int yaffs_stats_proc_read(char *p
+ dev->bg_gcs, dev->oldest_dirty_gc_count,
+ dev->n_obj, dev->n_tnodes);
+ }
+- up(&yaffs_context_lock);
++ mutex_unlock(&yaffs_context_lock);
+
+
+ return buf - page < count ? buf - page : count;
+@@ -3494,7 +3494,7 @@ static int __init init_yaffs_fs(void)
+
+
+
+- init_MUTEX(&yaffs_context_lock);
++ mutex_init(&yaffs_context_lock);
+
+ /* Install the proc_fs entries */
+ my_proc_entry = create_proc_entry("yaffs",
--- /dev/null
+From cd6657c4bde20886b0805ea9f2cbac7ec25ac2e5 Mon Sep 17 00:00:00 2001
+From: Charles Manning <cdhmanning@gmail.com>
+Date: Tue, 30 Nov 2010 16:01:28 +1300
+Subject: [PATCH 1/2] yaffs: Replace yaffs_dir_llseek with Linux generic
+ llseek
+
+commit ed8188fb7659cfb65b5adbe154d143190ade0324 upstream.
+
+There was not much point in having the yaffs version as it is
+functionally equivalent to the kernel one.
+
+This also gets rid of using BKL in yaffs2.
+
+Signed-off-by: Charles Manning <cdhmanning@gmail.com>
+---
+ yaffs_vfs.c | 30 +-----------------------------
+ yaffs_vfs_multi.c | 30 +-----------------------------
+ 2 files changed, 2 insertions(+), 58 deletions(-)
+
+--- a/fs/yaffs2/yaffs_vfs_glue.c
++++ b/fs/yaffs2/yaffs_vfs_glue.c
+@@ -342,8 +342,6 @@ static int yaffs_follow_link(struct dent
+
+ static void yaffs_touch_super(yaffs_dev_t *dev);
+
+-static loff_t yaffs_dir_llseek(struct file *file, loff_t offset, int origin);
+-
+ static int yaffs_vfs_setattr(struct inode *, struct iattr *);
+
+
+@@ -460,7 +458,7 @@ static const struct file_operations yaff
+ .read = generic_read_dir,
+ .readdir = yaffs_readdir,
+ .fsync = yaffs_sync_object,
+- .llseek = yaffs_dir_llseek,
++ .llseek = generic_file_llseek,
+ };
+
+ static const struct super_operations yaffs_super_ops = {
+@@ -1534,32 +1532,6 @@ static void yaffs_release_space(struct f
+ }
+
+
+-static loff_t yaffs_dir_llseek(struct file *file, loff_t offset, int origin)
+-{
+- long long retval;
+-
+- lock_kernel();
+-
+- switch (origin){
+- case 2:
+- offset += i_size_read(file->f_path.dentry->d_inode);
+- break;
+- case 1:
+- offset += file->f_pos;
+- }
+- retval = -EINVAL;
+-
+- if (offset >= 0){
+- if (offset != file->f_pos)
+- file->f_pos = offset;
+-
+- retval = offset;
+- }
+- unlock_kernel();
+- return retval;
+-}
+-
+-
+ static int yaffs_readdir(struct file *f, void *dirent, filldir_t filldir)
+ {
+ yaffs_obj_t *obj;
--- /dev/null
+From e1537a700c2e750c5eacc5ad93f30821f1e94424 Mon Sep 17 00:00:00 2001
+From: Charles Manning <cdhmanning@gmail.com>
+Date: Mon, 15 Aug 2011 11:40:30 +1200
+Subject: [PATCH 2/2] Mods for Linux 3.0 and fix a typo
+
+commit a7b5dcf904ba6f7890e4b77ce1f56388b855d0f6 upstream.
+
+Roll in NCB's patch and some other changes for Linux 3.0.
+Also fix a dumb type retired_writes->retried_writes
+
+Signed-off-by: Charles Manning <cdhmanning@gmail.com>
+---
+ patch-ker.sh | 2 +-
+ yaffs_vfs_glue.c | 42 ++++++++++++++++++++++++++++++++++--------
+ 2 files changed, 35 insertions(+), 9 deletions(-)
+
+--- a/fs/yaffs2/yaffs_vfs_glue.c
++++ b/fs/yaffs2/yaffs_vfs_glue.c
+@@ -72,7 +72,9 @@
+ #include <linux/init.h>
+ #include <linux/fs.h>
+ #include <linux/proc_fs.h>
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 39))
+ #include <linux/smp_lock.h>
++#endif
+ #include <linux/pagemap.h>
+ #include <linux/mtd/mtd.h>
+ #include <linux/interrupt.h>
+@@ -236,7 +238,9 @@ static int yaffs_file_flush(struct file
+ static int yaffs_file_flush(struct file *file);
+ #endif
+
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 34))
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 39))
++static int yaffs_sync_object(struct file *file, loff_t start, loff_t end, int datasync);
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 34))
+ static int yaffs_sync_object(struct file *file, int datasync);
+ #else
+ static int yaffs_sync_object(struct file *file, struct dentry *dentry,
+@@ -1864,7 +1868,9 @@ static int yaffs_symlink(struct inode *d
+ return -ENOMEM;
+ }
+
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 34))
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 39))
++static int yaffs_sync_object(struct file *file, loff_t start, loff_t end, int datasync)
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 34))
+ static int yaffs_sync_object(struct file *file, int datasync)
+ #else
+ static int yaffs_sync_object(struct file *file, struct dentry *dentry,
+@@ -3067,7 +3073,13 @@ static int yaffs_internal_read_super_mtd
+ return yaffs_internal_read_super(1, sb, data, silent) ? 0 : -EINVAL;
+ }
+
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 39))
++static struct dentry *yaffs_mount(struct file_system_type *fs_type, int flags,
++ const char *dev_name, void *data)
++{
++ return mount_bdev(fs_type, flags, dev_name, data, yaffs_internal_read_super_mtd);
++}
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_read_super(struct file_system_type *fs,
+ int flags, const char *dev_name,
+ void *data, struct vfsmount *mnt)
+@@ -3090,8 +3102,12 @@ static struct super_block *yaffs_read_su
+ static struct file_system_type yaffs_fs_type = {
+ .owner = THIS_MODULE,
+ .name = "yaffs",
+- .get_sb = yaffs_read_super,
+- .kill_sb = kill_block_super,
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 39))
++ .mount = yaffs_mount,
++#else
++ .get_sb = yaffs_read_super,
++#endif
++ .kill_sb = kill_block_super,
+ .fs_flags = FS_REQUIRES_DEV,
+ };
+ #else
+@@ -3115,7 +3131,13 @@ static int yaffs2_internal_read_super_mt
+ return yaffs_internal_read_super(2, sb, data, silent) ? 0 : -EINVAL;
+ }
+
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 39))
++static struct dentry *yaffs2_mount(struct file_system_type *fs_type, int flags,
++ const char *dev_name, void *data)
++{
++ return mount_bdev(fs_type, flags, dev_name, data, yaffs2_internal_read_super_mtd);
++}
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs2_read_super(struct file_system_type *fs,
+ int flags, const char *dev_name, void *data,
+ struct vfsmount *mnt)
+@@ -3137,8 +3159,12 @@ static struct super_block *yaffs2_read_s
+ static struct file_system_type yaffs2_fs_type = {
+ .owner = THIS_MODULE,
+ .name = "yaffs2",
+- .get_sb = yaffs2_read_super,
+- .kill_sb = kill_block_super,
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 39))
++ .mount = yaffs2_mount,
++#else
++ .get_sb = yaffs2_read_super,
++#endif
++ .kill_sb = kill_block_super,
+ .fs_flags = FS_REQUIRES_DEV,
+ };
+ #else
--- /dev/null
+--- a/fs/yaffs2/yaffs_mtdif1.c
++++ b/fs/yaffs2/yaffs_mtdif1.c
+@@ -127,7 +127,7 @@ int nandmtd1_WriteChunkWithTagsToNAND(ya
+ #endif
+
+ memset(&ops, 0, sizeof(ops));
+- ops.mode = MTD_OOB_AUTO;
++ ops.mode = MTD_OPS_AUTO_OOB;
+ ops.len = (data) ? chunkBytes : 0;
+ ops.ooblen = YTAG1_SIZE;
+ ops.datbuf = (__u8 *)data;
+@@ -179,7 +179,7 @@ int nandmtd1_ReadChunkWithTagsFromNAND(y
+ int deleted;
+
+ memset(&ops, 0, sizeof(ops));
+- ops.mode = MTD_OOB_AUTO;
++ ops.mode = MTD_OPS_AUTO_OOB;
+ ops.len = (data) ? chunkBytes : 0;
+ ops.ooblen = YTAG1_SIZE;
+ ops.datbuf = data;
+--- a/fs/yaffs2/yaffs_mtdif2.c
++++ b/fs/yaffs2/yaffs_mtdif2.c
+@@ -71,7 +71,7 @@ int nandmtd2_WriteChunkWithTagsToNAND(ya
+ yaffs_PackTags2(&pt, tags, !dev->param.no_tags_ecc);
+
+ #if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+- ops.mode = MTD_OOB_AUTO;
++ ops.mode = MTD_OPS_AUTO_OOB;
+ ops.ooblen = (dev->param.inband_tags) ? 0 : packed_tags_size;
+ ops.len = dev->param.total_bytes_per_chunk;
+ ops.ooboffs = 0;
+@@ -136,7 +136,7 @@ int nandmtd2_ReadChunkWithTagsFromNAND(y
+ retval = mtd->read(mtd, addr, dev->param.total_bytes_per_chunk,
+ &dummy, data);
+ else if (tags) {
+- ops.mode = MTD_OOB_AUTO;
++ ops.mode = MTD_OPS_AUTO_OOB;
+ ops.ooblen = packed_tags_size;
+ ops.len = data ? dev->data_bytes_per_chunk : packed_tags_size;
+ ops.ooboffs = 0;
+--- a/fs/yaffs2/yaffs_mtdif.h
++++ b/fs/yaffs2/yaffs_mtdif.h
+@@ -24,4 +24,11 @@ extern struct nand_oobinfo yaffs_noeccin
+ #endif
+ int nandmtd_EraseBlockInNAND(yaffs_dev_t *dev, int blockNumber);
+ int nandmtd_InitialiseNAND(yaffs_dev_t *dev);
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 2, 0))
++#include <mtd/mtd-abi.h>
++#else
++#define MTD_OPS_AUTO_OOB MTD_OOB_AUTO
++#endif
++
+ #endif
--- /dev/null
+--- a/fs/yaffs2/yaffs_vfs_glue.c
++++ b/fs/yaffs2/yaffs_vfs_glue.c
+@@ -220,6 +220,29 @@ static struct inode *yaffs_iget(struct s
+ #define yaffs_SuperToDevice(sb) ((yaffs_dev_t *)sb->u.generic_sbp)
+ #endif
+
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(3, 2, 0))
++static inline void yaffs_set_nlink(struct inode *inode, unsigned int nlink)
++{
++ set_nlink(inode, nlink);
++}
++
++static inline void yaffs_dec_link_count(struct inode *inode)
++{
++ inode_dec_link_count(inode);
++}
++#else
++static inline void yaffs_set_nlink(struct inode *inode, unsigned int nlink)
++{
++ inode->i_nlink = nlink;
++}
++
++static inline void yaffs_dec_link_count(struct inode *inode)
++{
++ inode->i_nlink--;
++ mark_inode_dirty(inode)
++}
++#endif
++
+
+ #define update_dir_time(dir) do {\
+ (dir)->i_ctime = (dir)->i_mtime = CURRENT_TIME; \
+@@ -1362,7 +1385,7 @@ static void yaffs_fill_inode_from_obj(st
+ inode->i_size = yaffs_get_obj_length(obj);
+ inode->i_blocks = (inode->i_size + 511) >> 9;
+
+- inode->i_nlink = yaffs_get_obj_link_count(obj);
++ yaffs_set_nlink(inode, yaffs_get_obj_link_count(obj));
+
+ T(YAFFS_TRACE_OS,
+ (TSTR("yaffs_fill_inode mode %x uid %d gid %d size %d count %d\n"),
+@@ -1784,10 +1807,9 @@ static int yaffs_unlink(struct inode *di
+ retVal = yaffs_unlinker(obj, dentry->d_name.name);
+
+ if (retVal == YAFFS_OK) {
+- dentry->d_inode->i_nlink--;
++ yaffs_dec_link_count(dentry->d_inode);
+ dir->i_version++;
+ yaffs_gross_unlock(dev);
+- mark_inode_dirty(dentry->d_inode);
+ update_dir_time(dir);
+ return 0;
+ }
+@@ -1818,7 +1840,8 @@ static int yaffs_link(struct dentry *old
+ obj);
+
+ if (link) {
+- old_dentry->d_inode->i_nlink = yaffs_get_obj_link_count(obj);
++ yaffs_set_nlink(old_dentry->d_inode,
++ yaffs_get_obj_link_count(obj));
+ d_instantiate(dentry, old_dentry->d_inode);
+ atomic_inc(&old_dentry->d_inode->i_count);
+ T(YAFFS_TRACE_OS,
+@@ -1937,11 +1960,9 @@ static int yaffs_rename(struct inode *ol
+ yaffs_gross_unlock(dev);
+
+ if (retVal == YAFFS_OK) {
+- if (target) {
+- new_dentry->d_inode->i_nlink--;
+- mark_inode_dirty(new_dentry->d_inode);
+- }
+-
++ if (target)
++ yaffs_dec_link_count(new_dentry->d_inode);
++
+ update_dir_time(old_dir);
+ if(old_dir != new_dir)
+ update_dir_time(new_dir);
--- /dev/null
+--- a/fs/yaffs2/yaffs_vfs_glue.c
++++ b/fs/yaffs2/yaffs_vfs_glue.c
+@@ -273,8 +273,13 @@ static int yaffs_sync_object(struct file
+ static int yaffs_readdir(struct file *f, void *dirent, filldir_t filldir);
+
+ #if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 3, 0))
++static int yaffs_create(struct inode *dir, struct dentry *dentry, umode_t mode,
++ struct nameidata *n);
++#else
+ static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode,
+ struct nameidata *n);
++#endif
+ static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry,
+ struct nameidata *n);
+ #else
+@@ -286,9 +291,17 @@ static int yaffs_link(struct dentry *old
+ static int yaffs_unlink(struct inode *dir, struct dentry *dentry);
+ static int yaffs_symlink(struct inode *dir, struct dentry *dentry,
+ const char *symname);
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 3, 0))
++static int yaffs_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode);
++#else
+ static int yaffs_mkdir(struct inode *dir, struct dentry *dentry, int mode);
++#endif
+
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 3, 0))
++static int yaffs_mknod(struct inode *dir, struct dentry *dentry, umode_t mode,
++ dev_t dev);
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode,
+ dev_t dev);
+ #else
+@@ -1679,7 +1692,10 @@ out:
+ #define YCRED(x) (x->cred)
+ #endif
+
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 3, 0))
++static int yaffs_mknod(struct inode *dir, struct dentry *dentry, umode_t mode,
++ dev_t rdev)
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode,
+ dev_t rdev)
+ #else
+@@ -1769,7 +1785,11 @@ static int yaffs_mknod(struct inode *dir
+ return error;
+ }
+
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 3, 0))
++static int yaffs_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode)
++#else
+ static int yaffs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
++#endif
+ {
+ int retVal;
+ T(YAFFS_TRACE_OS, (TSTR("yaffs_mkdir\n")));
+@@ -1777,7 +1797,10 @@ static int yaffs_mkdir(struct inode *dir
+ return retVal;
+ }
+
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 3, 0))
++static int yaffs_create(struct inode *dir, struct dentry *dentry, umode_t mode,
++ struct nameidata *n)
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode,
+ struct nameidata *n)
+ #else
--- /dev/null
+--- a/fs/yaffs2/yaffs_mtdif1.c
++++ b/fs/yaffs2/yaffs_mtdif1.c
+@@ -133,7 +133,7 @@ int nandmtd1_WriteChunkWithTagsToNAND(ya
+ ops.datbuf = (__u8 *)data;
+ ops.oobbuf = (__u8 *)&pt1;
+
+- retval = mtd->write_oob(mtd, addr, &ops);
++ retval = mtd_write_oob(mtd, addr, &ops);
+ if (retval) {
+ T(YAFFS_TRACE_MTD,
+ (TSTR("write_oob failed, chunk %d, mtd error %d"TENDSTR),
+@@ -194,7 +194,7 @@ int nandmtd1_ReadChunkWithTagsFromNAND(y
+ /* Read page and oob using MTD.
+ * Check status and determine ECC result.
+ */
+- retval = mtd->read_oob(mtd, addr, &ops);
++ retval = mtd_read_oob(mtd, addr, &ops);
+ if (retval) {
+ T(YAFFS_TRACE_MTD,
+ (TSTR("read_oob failed, chunk %d, mtd error %d"TENDSTR),
+@@ -218,7 +218,7 @@ int nandmtd1_ReadChunkWithTagsFromNAND(y
+ /* fall into... */
+ default:
+ rettags(etags, YAFFS_ECC_RESULT_UNFIXED, 0);
+- etags->block_bad = (mtd->block_isbad)(mtd, addr);
++ etags->block_bad = mtd_block_isbad(mtd, addr);
+ return YAFFS_FAIL;
+ }
+
+@@ -286,7 +286,7 @@ int nandmtd1_MarkNANDBlockBad(struct yaf
+
+ T(YAFFS_TRACE_BAD_BLOCKS,(TSTR("marking block %d bad"TENDSTR), block_no));
+
+- retval = mtd->block_markbad(mtd, (loff_t)blocksize * block_no);
++ retval = mtd_block_markbad(mtd, (loff_t)blocksize * block_no);
+ return (retval) ? YAFFS_FAIL : YAFFS_OK;
+ }
+
+@@ -336,7 +336,7 @@ int nandmtd1_QueryNANDBlock(struct yaffs
+ return YAFFS_FAIL;
+
+ retval = nandmtd1_ReadChunkWithTagsFromNAND(dev, chunkNo, NULL, &etags);
+- etags.block_bad = (mtd->block_isbad)(mtd, addr);
++ etags.block_bad = mtd_block_isbad(mtd, addr);
+ if (etags.block_bad) {
+ T(YAFFS_TRACE_BAD_BLOCKS,
+ (TSTR("block %d is marked bad"TENDSTR), block_no));
+--- a/fs/yaffs2/yaffs_vfs_glue.c
++++ b/fs/yaffs2/yaffs_vfs_glue.c
+@@ -2607,8 +2607,8 @@ static void yaffs_MTDPutSuper(struct sup
+ {
+ struct mtd_info *mtd = yaffs_dev_to_mtd(yaffs_SuperToDevice(sb));
+
+- if (mtd->sync)
+- mtd->sync(mtd);
++ if (mtd)
++ mtd_sync(mtd);
+
+ put_mtd_device(mtd);
+ }
+--- a/fs/yaffs2/yaffs_mtdif2.c
++++ b/fs/yaffs2/yaffs_mtdif2.c
+@@ -77,7 +77,7 @@ int nandmtd2_WriteChunkWithTagsToNAND(ya
+ ops.ooboffs = 0;
+ ops.datbuf = (__u8 *)data;
+ ops.oobbuf = (dev->param.inband_tags) ? NULL : packed_tags_ptr;
+- retval = mtd->write_oob(mtd, addr, &ops);
++ retval = mtd_write_oob(mtd, addr, &ops);
+
+ #else
+ if (!dev->param.inband_tags) {
+@@ -133,7 +133,7 @@ int nandmtd2_ReadChunkWithTagsFromNAND(y
+
+ #if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ if (dev->param.inband_tags || (data && !tags))
+- retval = mtd->read(mtd, addr, dev->param.total_bytes_per_chunk,
++ retval = mtd_read(mtd, addr, dev->param.total_bytes_per_chunk,
+ &dummy, data);
+ else if (tags) {
+ ops.mode = MTD_OPS_AUTO_OOB;
+@@ -142,7 +142,7 @@ int nandmtd2_ReadChunkWithTagsFromNAND(y
+ ops.ooboffs = 0;
+ ops.datbuf = data;
+ ops.oobbuf = yaffs_dev_to_lc(dev)->spareBuffer;
+- retval = mtd->read_oob(mtd, addr, &ops);
++ retval = mtd_read_oob(mtd, addr, &ops);
+ }
+ #else
+ if (!dev->param.inband_tags && data && tags) {
+@@ -201,7 +201,7 @@ int nandmtd2_MarkNANDBlockBad(struct yaf
+ (TSTR("nandmtd2_MarkNANDBlockBad %d" TENDSTR), block_no));
+
+ retval =
+- mtd->block_markbad(mtd,
++ mtd_block_markbad(mtd,
+ block_no * dev->param.chunks_per_block *
+ dev->param.total_bytes_per_chunk);
+
+@@ -221,7 +221,7 @@ int nandmtd2_QueryNANDBlock(struct yaffs
+ T(YAFFS_TRACE_MTD,
+ (TSTR("nandmtd2_QueryNANDBlock %d" TENDSTR), block_no));
+ retval =
+- mtd->block_isbad(mtd,
++ mtd_block_isbad(mtd,
+ block_no * dev->param.chunks_per_block *
+ dev->param.total_bytes_per_chunk);
+
+--- a/fs/yaffs2/yaffs_mtdif.h
++++ b/fs/yaffs2/yaffs_mtdif.h
+@@ -31,4 +31,39 @@ int nandmtd_InitialiseNAND(yaffs_dev_t *
+ #define MTD_OPS_AUTO_OOB MTD_OOB_AUTO
+ #endif
+
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(3, 3, 0))
++static inline int mtd_erase(struct mdt_info *mtd, struct erase_info *ei)
++{
++ return mtd->erase(mtd, ei);
++}
++
++static inline int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs)
++{
++ return mtd->block_mark_bad(mtd, ofs);
++}
++
++static inline int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs)
++{
++ return mtd->block_is_bad(mtd, ofs);
++}
++
++static inline int mtd_read_oob(struct mtd_info *mtd, loff_t from,
++ struct mtd_oob_ops *ops)
++{
++ return mtd->read_oob(mtd, from, ops);
++}
++
++static inline int mtd_write_oob(struct mtd_info *mtd, loff_t to,
++ struct mtd_oob_ops *ops)
++{
++ return mtd->write_oob(mtd, to, ops);
++}
++
++static inline void mtd_sync(struct mtd_info *mtd)
++{
++ if (mtd->sync)
++ mtd->sync(mtd);
++}
++#endif
++
+ #endif
+--- a/fs/yaffs2/yaffs_mtdif.c
++++ b/fs/yaffs2/yaffs_mtdif.c
+@@ -41,7 +41,7 @@ int nandmtd_EraseBlockInNAND(yaffs_dev_t
+ ei.callback = NULL;
+ ei.priv = (u_long) dev;
+
+- retval = mtd->erase(mtd, &ei);
++ retval = mtd_erase(mtd, &ei);
+
+ if (retval == 0)
+ return YAFFS_OK;
--- /dev/null
+--- a/fs/yaffs2/yaffs_vfs_glue.c
++++ b/fs/yaffs2/yaffs_vfs_glue.c
+@@ -2793,6 +2793,15 @@ static struct super_block *yaffs_interna
+ return NULL;
+ }
+
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 4, 0)
++ T(YAFFS_TRACE_OS, (TSTR(" erase %p\n"), mtd->_erase));
++ T(YAFFS_TRACE_OS, (TSTR(" read %p\n"), mtd->_read));
++ T(YAFFS_TRACE_OS, (TSTR(" write %p\n"), mtd->_write));
++ T(YAFFS_TRACE_OS, (TSTR(" readoob %p\n"), mtd->_read_oob));
++ T(YAFFS_TRACE_OS, (TSTR(" writeoob %p\n"), mtd->_write_oob));
++ T(YAFFS_TRACE_OS, (TSTR(" block_isbad %p\n"), mtd->_block_isbad));
++ T(YAFFS_TRACE_OS, (TSTR(" block_markbad %p\n"), mtd->_block_markbad));
++#else
+ T(YAFFS_TRACE_OS, (TSTR(" erase %p\n"), mtd->erase));
+ T(YAFFS_TRACE_OS, (TSTR(" read %p\n"), mtd->read));
+ T(YAFFS_TRACE_OS, (TSTR(" write %p\n"), mtd->write));
+@@ -2800,6 +2809,7 @@ static struct super_block *yaffs_interna
+ T(YAFFS_TRACE_OS, (TSTR(" writeoob %p\n"), mtd->write_oob));
+ T(YAFFS_TRACE_OS, (TSTR(" block_isbad %p\n"), mtd->block_isbad));
+ T(YAFFS_TRACE_OS, (TSTR(" block_markbad %p\n"), mtd->block_markbad));
++#endif
+ T(YAFFS_TRACE_OS, (TSTR(" %s %d\n"), WRITE_SIZE_STR, WRITE_SIZE(mtd)));
+ T(YAFFS_TRACE_OS, (TSTR(" oobsize %d\n"), mtd->oobsize));
+ T(YAFFS_TRACE_OS, (TSTR(" erasesize %d\n"), mtd->erasesize));
+@@ -2828,6 +2838,15 @@ static struct super_block *yaffs_interna
+
+ if (yaffs_version == 2) {
+ /* Check for version 2 style functions */
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 4, 0))
++ if (!mtd->_erase ||
++ !mtd->_block_isbad ||
++ !mtd->_block_markbad ||
++ !mtd->_read ||
++ !mtd->_write ||
++ !mtd->_read_oob ||
++ !mtd->_write_oob) {
++#else
+ if (!mtd->erase ||
+ !mtd->block_isbad ||
+ !mtd->block_markbad ||
+@@ -2839,6 +2858,7 @@ static struct super_block *yaffs_interna
+ !mtd->write_ecc ||
+ !mtd->read_ecc || !mtd->read_oob || !mtd->write_oob) {
+ #endif
++#endif
+ T(YAFFS_TRACE_ALWAYS,
+ (TSTR("yaffs: MTD device does not support required "
+ "functions\n")));
+@@ -2855,6 +2875,13 @@ static struct super_block *yaffs_interna
+ }
+ } else {
+ /* Check for V1 style functions */
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 4, 0))
++ if (!mtd->_erase ||
++ !mtd->_read ||
++ !mtd->_write ||
++ !mtd->_read_oob ||
++ !mtd->_write_oob) {
++#else
+ if (!mtd->erase ||
+ !mtd->read ||
+ !mtd->write ||
+@@ -2864,6 +2891,7 @@ static struct super_block *yaffs_interna
+ !mtd->write_ecc ||
+ !mtd->read_ecc || !mtd->read_oob || !mtd->write_oob) {
+ #endif
++#endif
+ T(YAFFS_TRACE_ALWAYS,
+ (TSTR("yaffs: MTD device does not support required "
+ "functions\n")));
--- /dev/null
+--- a/fs/yaffs2/yaffs_vfs_glue.c
++++ b/fs/yaffs2/yaffs_vfs_glue.c
+@@ -3119,7 +3119,11 @@ static struct super_block *yaffs_interna
+
+ T(YAFFS_TRACE_OS, (TSTR("yaffs_read_super: got root inode\n")));
+
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 4, 0))
++ root = d_make_root(inode);
++#else
+ root = d_alloc_root(inode);
++#endif
+
+ T(YAFFS_TRACE_OS, (TSTR("yaffs_read_super: d_alloc_root done\n")));
+
--- /dev/null
+--- a/fs/yaffs2/yaffs_vfs_glue.c
++++ b/fs/yaffs2/yaffs_vfs_glue.c
+@@ -924,7 +924,11 @@ static void yaffs_evict_inode( struct in
+ if (!inode->i_nlink && !is_bad_inode(inode))
+ deleteme = 1;
+ truncate_inode_pages(&inode->i_data,0);
+- end_writeback(inode);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 5, 0)
++ clear_inode(inode);
++#else
++ end_writeback(inode);
++#endif
+
+ if(deleteme && obj){
+ dev = obj->my_dev;
--- /dev/null
+--- a/fs/yaffs2/yaffs_vfs_glue.c
++++ b/fs/yaffs2/yaffs_vfs_glue.c
+@@ -272,20 +272,29 @@ static int yaffs_sync_object(struct file
+
+ static int yaffs_readdir(struct file *f, void *dirent, filldir_t filldir);
+
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 3, 0))
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 6, 0))
++static int yaffs_create(struct inode *dir, struct dentry *dentry, umode_t mode,
++ bool excl);
++#elif (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 3, 0))
+ static int yaffs_create(struct inode *dir, struct dentry *dentry, umode_t mode,
+ struct nameidata *n);
+-#else
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode,
+ struct nameidata *n);
++#else
++static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode);
+ #endif
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 6, 0))
++static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry,
++ unsigned int flags);
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry,
+ struct nameidata *n);
+ #else
+-static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode);
+ static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry);
+ #endif
++
+ static int yaffs_link(struct dentry *old_dentry, struct inode *dir,
+ struct dentry *dentry);
+ static int yaffs_unlink(struct inode *dir, struct dentry *dentry);
+@@ -811,7 +820,10 @@ struct inode *yaffs_get_inode(struct sup
+ /*
+ * Lookup is used to find objects in the fs
+ */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 6, 0))
++static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry,
++ unsigned int flags)
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+
+ static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry,
+ struct nameidata *n)
+@@ -1801,7 +1813,10 @@ static int yaffs_mkdir(struct inode *dir
+ return retVal;
+ }
+
+-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 3, 0))
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 6, 0))
++static int yaffs_create(struct inode *dir, struct dentry *dentry, umode_t mode,
++ bool excl)
++#elif (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 3, 0))
+ static int yaffs_create(struct inode *dir, struct dentry *dentry, umode_t mode,
+ struct nameidata *n)
+ #elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
--- /dev/null
+--- a/fs/yaffs2/yaffs_vfs_glue.c
++++ b/fs/yaffs2/yaffs_vfs_glue.c
+@@ -394,6 +394,84 @@ static void yaffs_touch_super(yaffs_dev_
+ static int yaffs_vfs_setattr(struct inode *, struct iattr *);
+
+
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 6, 0))
++
++#define yaffs_super_to_dev(sb) ((struct yaffs_dev_s *)sb->s_fs_info)
++
++static inline struct yaffs_LinuxContext *
++yaffs_sb_to_ylc(struct super_block *sb)
++{
++ struct yaffs_dev_s *ydev;
++ struct yaffs_LinuxContext *ylc;
++
++ ydev = yaffs_super_to_dev(sb);
++ ylc = yaffs_dev_to_lc(ydev);
++ return ylc;
++}
++
++static inline struct super_block *yaffs_work_to_sb(struct work_struct *work)
++{
++ struct delayed_work *dwork;
++ struct yaffs_LinuxContext *ylc;
++
++ dwork = container_of(work, struct delayed_work, work);
++ ylc = container_of(dwork, struct yaffs_LinuxContext, sb_sync_dwork);
++ return ylc->superBlock;
++}
++
++static void yaffs_sb_sync_dwork_func(struct work_struct *work)
++{
++ struct super_block *sb = yaffs_work_to_sb(work);
++
++ yaffs_write_super(sb);
++}
++
++static void yaffs_init_sb_sync_dwork(struct yaffs_LinuxContext *ylc)
++{
++ INIT_DELAYED_WORK(&ylc->sb_sync_dwork, yaffs_sb_sync_dwork_func);
++}
++
++static void yaffs_cancel_sb_sync_dwork(struct super_block *sb)
++{
++ struct yaffs_LinuxContext *ylc = yaffs_sb_to_ylc(sb);
++
++ cancel_delayed_work_sync(&ylc->sb_sync_dwork);
++}
++
++static inline bool yaffs_sb_is_dirty(struct super_block *sb)
++{
++ struct yaffs_LinuxContext *ylc = yaffs_sb_to_ylc(sb);
++
++ return !!ylc->sb_dirty;
++}
++
++static inline void yaffs_sb_set_dirty(struct super_block *sb, int dirty)
++{
++ struct yaffs_LinuxContext *ylc = yaffs_sb_to_ylc(sb);
++
++ if (ylc->sb_dirty == dirty)
++ return;
++
++ ylc->sb_dirty = dirty;
++ if (dirty)
++ queue_delayed_work(system_long_wq, &ylc->sb_sync_dwork,
++ msecs_to_jiffies(5000));
++}
++#else
++static inline bool yaffs_sb_is_dirty(struct super_block *sb)
++{
++ return !!sb->s_dirt;
++}
++
++static inline void yaffs_sb_set_dirty(struct super_block *sb, int dirty)
++{
++ sb->s_dirt = dirty;
++}
++
++static inline void yaffs_init_sb_sync_dwork(struct yaffs_LinuxContext *ylc) {}
++static inline void yaffs_cancel_sb_sync_dwork(struct super_block *sb) {}
++#endif /* >= 3.6.0 */
++
+ static struct address_space_operations yaffs_file_address_operations = {
+ .readpage = yaffs_readpage,
+ .writepage = yaffs_writepage,
+@@ -527,7 +605,9 @@ static const struct super_operations yaf
+ .clear_inode = yaffs_clear_inode,
+ #endif
+ .sync_fs = yaffs_sync_fs,
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(3, 6, 0))
+ .write_super = yaffs_write_super,
++#endif
+ };
+
+
+@@ -2314,7 +2394,7 @@ static int yaffs_do_sync_fs(struct super
+ T(YAFFS_TRACE_OS | YAFFS_TRACE_SYNC | YAFFS_TRACE_BACKGROUND,
+ (TSTR("yaffs_do_sync_fs: gc-urgency %d %s %s%s\n"),
+ gc_urgent,
+- sb->s_dirt ? "dirty" : "clean",
++ yaffs_sb_is_dirty(sb) ? "dirty" : "clean",
+ request_checkpoint ? "checkpoint requested" : "no checkpoint",
+ oneshot_checkpoint ? " one-shot" : "" ));
+
+@@ -2323,9 +2403,9 @@ static int yaffs_do_sync_fs(struct super
+ oneshot_checkpoint) &&
+ !dev->is_checkpointed;
+
+- if (sb->s_dirt || do_checkpoint) {
++ if (yaffs_sb_is_dirty(sb) || do_checkpoint) {
+ yaffs_flush_super(sb, !dev->is_checkpointed && do_checkpoint);
+- sb->s_dirt = 0;
++ yaffs_sb_set_dirty(sb, 0);
+ if(oneshot_checkpoint)
+ yaffs_auto_checkpoint &= ~4;
+ }
+@@ -2601,6 +2681,8 @@ static void yaffs_put_super(struct super
+
+ yaffs_flush_super(sb,1);
+
++ yaffs_cancel_sb_sync_dwork(sb);
++
+ if (yaffs_dev_to_lc(dev)->putSuperFunc)
+ yaffs_dev_to_lc(dev)->putSuperFunc(sb);
+
+@@ -2639,7 +2721,7 @@ static void yaffs_touch_super(yaffs_dev_
+
+ T(YAFFS_TRACE_OS, (TSTR("yaffs_touch_super() sb = %p\n"), sb));
+ if (sb)
+- sb->s_dirt = 1;
++ yaffs_sb_set_dirty(sb, 1);
+ }
+
+ typedef struct {
+@@ -2965,6 +3047,8 @@ static struct super_block *yaffs_interna
+ context->dev = dev;
+ context->superBlock = sb;
+
++ yaffs_init_sb_sync_dwork(context);
++
+ dev->read_only = read_only;
+
+ #if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+@@ -3151,7 +3235,7 @@ static struct super_block *yaffs_interna
+ return NULL;
+ }
+ sb->s_root = root;
+- sb->s_dirt = !dev->is_checkpointed;
++ yaffs_sb_set_dirty(sb, !dev->is_checkpointed);
+ T(YAFFS_TRACE_ALWAYS,
+ (TSTR("yaffs_read_super: is_checkpointed %d\n"),
+ dev->is_checkpointed));
+--- a/fs/yaffs2/yaffs_linux.h
++++ b/fs/yaffs2/yaffs_linux.h
+@@ -34,6 +34,11 @@ struct yaffs_LinuxContext {
+
+ struct task_struct *readdirProcess;
+ unsigned mount_id;
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 6, 0))
++ struct delayed_work sb_sync_dwork; /* superblock write-out work */
++ int sb_dirty; /* superblock is dirty */
++#endif
+ };
+
+ #define yaffs_dev_to_lc(dev) ((struct yaffs_LinuxContext *)((dev)->os_context))
+--- a/fs/yaffs2/yportenv.h
++++ b/fs/yaffs2/yportenv.h
+@@ -49,6 +49,9 @@
+ #include <linux/slab.h>
+ #include <linux/vmalloc.h>
+ #include <linux/xattr.h>
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 6, 0))
++#include <linux/workqueue.h>
++#endif
+
+ #define YCHAR char
+ #define YUCHAR unsigned char
--- /dev/null
+From f31b7c0efa255dd17a5f584022a319387f09b0d8 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Tue, 12 Apr 2011 19:55:41 +0200
+Subject: [PATCH] squashfs: update xz compressor options struct.
+
+Update the xz compressor options struct to match the squashfs userspace
+one.
+---
+ fs/squashfs/xz_wrapper.c | 4 +++-
+ 1 files changed, 3 insertions(+), 1 deletions(-)
+
+--- a/fs/squashfs/xz_wrapper.c
++++ b/fs/squashfs/xz_wrapper.c
+@@ -39,8 +39,10 @@ struct squashfs_xz {
+ };
+
+ struct comp_opts {
+- __le32 dictionary_size;
+ __le32 flags;
++ __le16 bit_opts;
++ __le16 fb;
++ __le32 dictionary_size;
+ };
+
+ static void *squashfs_xz_init(struct squashfs_sb_info *msblk, void *buff,
--- /dev/null
+--- a/fs/jffs2/Kconfig
++++ b/fs/jffs2/Kconfig
+@@ -139,6 +139,15 @@ config JFFS2_LZO
+ This feature was added in July, 2007. Say 'N' if you need
+ compatibility with older bootloaders or kernels.
+
++config JFFS2_LZMA
++ bool "JFFS2 LZMA compression support" if JFFS2_COMPRESSION_OPTIONS
++ select LZMA_COMPRESS
++ select LZMA_DECOMPRESS
++ depends on JFFS2_FS
++ default n
++ help
++ JFFS2 wrapper to the LZMA C SDK
++
+ config JFFS2_RTIME
+ bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
+ depends on JFFS2_FS
+--- a/fs/jffs2/Makefile
++++ b/fs/jffs2/Makefile
+@@ -18,4 +18,7 @@ jffs2-$(CONFIG_JFFS2_RUBIN) += compr_rub
+ jffs2-$(CONFIG_JFFS2_RTIME) += compr_rtime.o
+ jffs2-$(CONFIG_JFFS2_ZLIB) += compr_zlib.o
+ jffs2-$(CONFIG_JFFS2_LZO) += compr_lzo.o
++jffs2-$(CONFIG_JFFS2_LZMA) += compr_lzma.o
+ jffs2-$(CONFIG_JFFS2_SUMMARY) += summary.o
++
++CFLAGS_compr_lzma.o += -Iinclude/linux -Ilib/lzma
+--- a/fs/jffs2/compr.c
++++ b/fs/jffs2/compr.c
+@@ -378,6 +378,9 @@ int __init jffs2_compressors_init(void)
+ #ifdef CONFIG_JFFS2_LZO
+ jffs2_lzo_init();
+ #endif
++#ifdef CONFIG_JFFS2_LZMA
++ jffs2_lzma_init();
++#endif
+ /* Setting default compression mode */
+ #ifdef CONFIG_JFFS2_CMODE_NONE
+ jffs2_compression_mode = JFFS2_COMPR_MODE_NONE;
+@@ -401,6 +404,9 @@ int __init jffs2_compressors_init(void)
+ int jffs2_compressors_exit(void)
+ {
+ /* Unregistering compressors */
++#ifdef CONFIG_JFFS2_LZMA
++ jffs2_lzma_exit();
++#endif
+ #ifdef CONFIG_JFFS2_LZO
+ jffs2_lzo_exit();
+ #endif
+--- a/fs/jffs2/compr.h
++++ b/fs/jffs2/compr.h
+@@ -29,9 +29,9 @@
+ #define JFFS2_DYNRUBIN_PRIORITY 20
+ #define JFFS2_LZARI_PRIORITY 30
+ #define JFFS2_RTIME_PRIORITY 50
+-#define JFFS2_ZLIB_PRIORITY 60
+-#define JFFS2_LZO_PRIORITY 80
+-
++#define JFFS2_LZMA_PRIORITY 70
++#define JFFS2_ZLIB_PRIORITY 80
++#define JFFS2_LZO_PRIORITY 90
+
+ #define JFFS2_RUBINMIPS_DISABLED /* RUBINs will be used only */
+ #define JFFS2_DYNRUBIN_DISABLED /* for decompression */
+@@ -101,5 +101,9 @@ void jffs2_zlib_exit(void);
+ int jffs2_lzo_init(void);
+ void jffs2_lzo_exit(void);
+ #endif
++#ifdef CONFIG_JFFS2_LZMA
++int jffs2_lzma_init(void);
++void jffs2_lzma_exit(void);
++#endif
+
+ #endif /* __JFFS2_COMPR_H__ */
+--- /dev/null
++++ b/fs/jffs2/compr_lzma.c
+@@ -0,0 +1,128 @@
++/*
++ * JFFS2 -- Journalling Flash File System, Version 2.
++ *
++ * For licensing information, see the file 'LICENCE' in this directory.
++ *
++ * JFFS2 wrapper to the LZMA C SDK
++ *
++ */
++
++#include <linux/lzma.h>
++#include "compr.h"
++
++#ifdef __KERNEL__
++ static DEFINE_MUTEX(deflate_mutex);
++#endif
++
++CLzmaEncHandle *p;
++Byte propsEncoded[LZMA_PROPS_SIZE];
++SizeT propsSize = sizeof(propsEncoded);
++
++STATIC void lzma_free_workspace(void)
++{
++ LzmaEnc_Destroy(p, &lzma_alloc, &lzma_alloc);
++}
++
++STATIC int INIT lzma_alloc_workspace(CLzmaEncProps *props)
++{
++ if ((p = (CLzmaEncHandle *)LzmaEnc_Create(&lzma_alloc)) == NULL)
++ {
++ PRINT_ERROR("Failed to allocate lzma deflate workspace\n");
++ return -ENOMEM;
++ }
++
++ if (LzmaEnc_SetProps(p, props) != SZ_OK)
++ {
++ lzma_free_workspace();
++ return -1;
++ }
++
++ if (LzmaEnc_WriteProperties(p, propsEncoded, &propsSize) != SZ_OK)
++ {
++ lzma_free_workspace();
++ return -1;
++ }
++
++ return 0;
++}
++
++STATIC int jffs2_lzma_compress(unsigned char *data_in, unsigned char *cpage_out,
++ uint32_t *sourcelen, uint32_t *dstlen)
++{
++ SizeT compress_size = (SizeT)(*dstlen);
++ int ret;
++
++ #ifdef __KERNEL__
++ mutex_lock(&deflate_mutex);
++ #endif
++
++ ret = LzmaEnc_MemEncode(p, cpage_out, &compress_size, data_in, *sourcelen,
++ 0, NULL, &lzma_alloc, &lzma_alloc);
++
++ #ifdef __KERNEL__
++ mutex_unlock(&deflate_mutex);
++ #endif
++
++ if (ret != SZ_OK)
++ return -1;
++
++ *dstlen = (uint32_t)compress_size;
++
++ return 0;
++}
++
++STATIC int jffs2_lzma_decompress(unsigned char *data_in, unsigned char *cpage_out,
++ uint32_t srclen, uint32_t destlen)
++{
++ int ret;
++ SizeT dl = (SizeT)destlen;
++ SizeT sl = (SizeT)srclen;
++ ELzmaStatus status;
++
++ ret = LzmaDecode(cpage_out, &dl, data_in, &sl, propsEncoded,
++ propsSize, LZMA_FINISH_ANY, &status, &lzma_alloc);
++
++ if (ret != SZ_OK || status == LZMA_STATUS_NOT_FINISHED || dl != (SizeT)destlen)
++ return -1;
++
++ return 0;
++}
++
++static struct jffs2_compressor jffs2_lzma_comp = {
++ .priority = JFFS2_LZMA_PRIORITY,
++ .name = "lzma",
++ .compr = JFFS2_COMPR_LZMA,
++ .compress = &jffs2_lzma_compress,
++ .decompress = &jffs2_lzma_decompress,
++ .disabled = 0,
++};
++
++int INIT jffs2_lzma_init(void)
++{
++ int ret;
++ CLzmaEncProps props;
++ LzmaEncProps_Init(&props);
++
++ props.dictSize = LZMA_BEST_DICT(0x2000);
++ props.level = LZMA_BEST_LEVEL;
++ props.lc = LZMA_BEST_LC;
++ props.lp = LZMA_BEST_LP;
++ props.pb = LZMA_BEST_PB;
++ props.fb = LZMA_BEST_FB;
++
++ ret = lzma_alloc_workspace(&props);
++ if (ret < 0)
++ return ret;
++
++ ret = jffs2_register_compressor(&jffs2_lzma_comp);
++ if (ret)
++ lzma_free_workspace();
++
++ return ret;
++}
++
++void jffs2_lzma_exit(void)
++{
++ jffs2_unregister_compressor(&jffs2_lzma_comp);
++ lzma_free_workspace();
++}
+--- a/fs/jffs2/super.c
++++ b/fs/jffs2/super.c
+@@ -373,14 +373,41 @@ static int __init init_jffs2_fs(void)
+ BUILD_BUG_ON(sizeof(struct jffs2_raw_inode) != 68);
+ BUILD_BUG_ON(sizeof(struct jffs2_raw_summary) != 32);
+
+- pr_info("version 2.2."
++ pr_info("version 2.2"
+ #ifdef CONFIG_JFFS2_FS_WRITEBUFFER
+ " (NAND)"
+ #endif
+ #ifdef CONFIG_JFFS2_SUMMARY
+- " (SUMMARY) "
++ " (SUMMARY)"
+ #endif
+- " © 2001-2006 Red Hat, Inc.\n");
++#ifdef CONFIG_JFFS2_ZLIB
++ " (ZLIB)"
++#endif
++#ifdef CONFIG_JFFS2_LZO
++ " (LZO)"
++#endif
++#ifdef CONFIG_JFFS2_LZMA
++ " (LZMA)"
++#endif
++#ifdef CONFIG_JFFS2_RTIME
++ " (RTIME)"
++#endif
++#ifdef CONFIG_JFFS2_RUBIN
++ " (RUBIN)"
++#endif
++#ifdef CONFIG_JFFS2_CMODE_NONE
++ " (CMODE_NONE)"
++#endif
++#ifdef CONFIG_JFFS2_CMODE_PRIORITY
++ " (CMODE_PRIORITY)"
++#endif
++#ifdef CONFIG_JFFS2_CMODE_SIZE
++ " (CMODE_SIZE)"
++#endif
++#ifdef CONFIG_JFFS2_CMODE_FAVOURLZO
++ " (CMODE_FAVOURLZO)"
++#endif
++ " (c) 2001-2006 Red Hat, Inc.\n");
+
+ jffs2_inode_cachep = kmem_cache_create("jffs2_i",
+ sizeof(struct jffs2_inode_info),
+--- a/include/uapi/linux/jffs2.h
++++ b/include/uapi/linux/jffs2.h
+@@ -46,6 +46,7 @@
+ #define JFFS2_COMPR_DYNRUBIN 0x05
+ #define JFFS2_COMPR_ZLIB 0x06
+ #define JFFS2_COMPR_LZO 0x07
++#define JFFS2_COMPR_LZMA 0x08
+ /* Compatibility flags. */
+ #define JFFS2_COMPAT_MASK 0xc000 /* What do to if an unknown nodetype is found */
+ #define JFFS2_NODE_ACCURATE 0x2000
+--- /dev/null
++++ b/include/linux/lzma.h
+@@ -0,0 +1,62 @@
++#ifndef __LZMA_H__
++#define __LZMA_H__
++
++#ifdef __KERNEL__
++ #include <linux/kernel.h>
++ #include <linux/sched.h>
++ #include <linux/slab.h>
++ #include <linux/vmalloc.h>
++ #include <linux/init.h>
++ #define LZMA_MALLOC vmalloc
++ #define LZMA_FREE vfree
++ #define PRINT_ERROR(msg) printk(KERN_WARNING #msg)
++ #define INIT __init
++ #define STATIC static
++#else
++ #include <stdint.h>
++ #include <stdlib.h>
++ #include <stdio.h>
++ #include <unistd.h>
++ #include <string.h>
++ #include <asm/types.h>
++ #include <errno.h>
++ #include <linux/jffs2.h>
++ #ifndef PAGE_SIZE
++ extern int page_size;
++ #define PAGE_SIZE page_size
++ #endif
++ #define LZMA_MALLOC malloc
++ #define LZMA_FREE free
++ #define PRINT_ERROR(msg) fprintf(stderr, msg)
++ #define INIT
++ #define STATIC
++#endif
++
++#include "lzma/LzmaDec.h"
++#include "lzma/LzmaEnc.h"
++
++#define LZMA_BEST_LEVEL (9)
++#define LZMA_BEST_LC (0)
++#define LZMA_BEST_LP (0)
++#define LZMA_BEST_PB (0)
++#define LZMA_BEST_FB (273)
++
++#define LZMA_BEST_DICT(n) (((int)((n) / 2)) * 2)
++
++static void *p_lzma_malloc(void *p, size_t size)
++{
++ if (size == 0)
++ return NULL;
++
++ return LZMA_MALLOC(size);
++}
++
++static void p_lzma_free(void *p, void *address)
++{
++ if (address != NULL)
++ LZMA_FREE(address);
++}
++
++static ISzAlloc lzma_alloc = {p_lzma_malloc, p_lzma_free};
++
++#endif
+--- /dev/null
++++ b/include/linux/lzma/LzFind.h
+@@ -0,0 +1,115 @@
++/* LzFind.h -- Match finder for LZ algorithms
++2009-04-22 : Igor Pavlov : Public domain */
++
++#ifndef __LZ_FIND_H
++#define __LZ_FIND_H
++
++#include "Types.h"
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++typedef UInt32 CLzRef;
++
++typedef struct _CMatchFinder
++{
++ Byte *buffer;
++ UInt32 pos;
++ UInt32 posLimit;
++ UInt32 streamPos;
++ UInt32 lenLimit;
++
++ UInt32 cyclicBufferPos;
++ UInt32 cyclicBufferSize; /* it must be = (historySize + 1) */
++
++ UInt32 matchMaxLen;
++ CLzRef *hash;
++ CLzRef *son;
++ UInt32 hashMask;
++ UInt32 cutValue;
++
++ Byte *bufferBase;
++ ISeqInStream *stream;
++ int streamEndWasReached;
++
++ UInt32 blockSize;
++ UInt32 keepSizeBefore;
++ UInt32 keepSizeAfter;
++
++ UInt32 numHashBytes;
++ int directInput;
++ size_t directInputRem;
++ int btMode;
++ int bigHash;
++ UInt32 historySize;
++ UInt32 fixedHashSize;
++ UInt32 hashSizeSum;
++ UInt32 numSons;
++ SRes result;
++ UInt32 crc[256];
++} CMatchFinder;
++
++#define Inline_MatchFinder_GetPointerToCurrentPos(p) ((p)->buffer)
++#define Inline_MatchFinder_GetIndexByte(p, index) ((p)->buffer[(Int32)(index)])
++
++#define Inline_MatchFinder_GetNumAvailableBytes(p) ((p)->streamPos - (p)->pos)
++
++int MatchFinder_NeedMove(CMatchFinder *p);
++Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p);
++void MatchFinder_MoveBlock(CMatchFinder *p);
++void MatchFinder_ReadIfRequired(CMatchFinder *p);
++
++void MatchFinder_Construct(CMatchFinder *p);
++
++/* Conditions:
++ historySize <= 3 GB
++ keepAddBufferBefore + matchMaxLen + keepAddBufferAfter < 511MB
++*/
++int MatchFinder_Create(CMatchFinder *p, UInt32 historySize,
++ UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
++ ISzAlloc *alloc);
++void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc);
++void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems);
++void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue);
++
++UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *buffer, CLzRef *son,
++ UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 _cutValue,
++ UInt32 *distances, UInt32 maxLen);
++
++/*
++Conditions:
++ Mf_GetNumAvailableBytes_Func must be called before each Mf_GetMatchLen_Func.
++ Mf_GetPointerToCurrentPos_Func's result must be used only before any other function
++*/
++
++typedef void (*Mf_Init_Func)(void *object);
++typedef Byte (*Mf_GetIndexByte_Func)(void *object, Int32 index);
++typedef UInt32 (*Mf_GetNumAvailableBytes_Func)(void *object);
++typedef const Byte * (*Mf_GetPointerToCurrentPos_Func)(void *object);
++typedef UInt32 (*Mf_GetMatches_Func)(void *object, UInt32 *distances);
++typedef void (*Mf_Skip_Func)(void *object, UInt32);
++
++typedef struct _IMatchFinder
++{
++ Mf_Init_Func Init;
++ Mf_GetIndexByte_Func GetIndexByte;
++ Mf_GetNumAvailableBytes_Func GetNumAvailableBytes;
++ Mf_GetPointerToCurrentPos_Func GetPointerToCurrentPos;
++ Mf_GetMatches_Func GetMatches;
++ Mf_Skip_Func Skip;
++} IMatchFinder;
++
++void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable);
++
++void MatchFinder_Init(CMatchFinder *p);
++UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
++UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
++void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
++void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+--- /dev/null
++++ b/include/linux/lzma/LzHash.h
+@@ -0,0 +1,54 @@
++/* LzHash.h -- HASH functions for LZ algorithms
++2009-02-07 : Igor Pavlov : Public domain */
++
++#ifndef __LZ_HASH_H
++#define __LZ_HASH_H
++
++#define kHash2Size (1 << 10)
++#define kHash3Size (1 << 16)
++#define kHash4Size (1 << 20)
++
++#define kFix3HashSize (kHash2Size)
++#define kFix4HashSize (kHash2Size + kHash3Size)
++#define kFix5HashSize (kHash2Size + kHash3Size + kHash4Size)
++
++#define HASH2_CALC hashValue = cur[0] | ((UInt32)cur[1] << 8);
++
++#define HASH3_CALC { \
++ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
++ hash2Value = temp & (kHash2Size - 1); \
++ hashValue = (temp ^ ((UInt32)cur[2] << 8)) & p->hashMask; }
++
++#define HASH4_CALC { \
++ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
++ hash2Value = temp & (kHash2Size - 1); \
++ hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
++ hashValue = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & p->hashMask; }
++
++#define HASH5_CALC { \
++ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
++ hash2Value = temp & (kHash2Size - 1); \
++ hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
++ hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)); \
++ hashValue = (hash4Value ^ (p->crc[cur[4]] << 3)) & p->hashMask; \
++ hash4Value &= (kHash4Size - 1); }
++
++/* #define HASH_ZIP_CALC hashValue = ((cur[0] | ((UInt32)cur[1] << 8)) ^ p->crc[cur[2]]) & 0xFFFF; */
++#define HASH_ZIP_CALC hashValue = ((cur[2] | ((UInt32)cur[0] << 8)) ^ p->crc[cur[1]]) & 0xFFFF;
++
++
++#define MT_HASH2_CALC \
++ hash2Value = (p->crc[cur[0]] ^ cur[1]) & (kHash2Size - 1);
++
++#define MT_HASH3_CALC { \
++ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
++ hash2Value = temp & (kHash2Size - 1); \
++ hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); }
++
++#define MT_HASH4_CALC { \
++ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
++ hash2Value = temp & (kHash2Size - 1); \
++ hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
++ hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & (kHash4Size - 1); }
++
++#endif
+--- /dev/null
++++ b/include/linux/lzma/LzmaDec.h
+@@ -0,0 +1,231 @@
++/* LzmaDec.h -- LZMA Decoder
++2009-02-07 : Igor Pavlov : Public domain */
++
++#ifndef __LZMA_DEC_H
++#define __LZMA_DEC_H
++
++#include "Types.h"
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/* #define _LZMA_PROB32 */
++/* _LZMA_PROB32 can increase the speed on some CPUs,
++ but memory usage for CLzmaDec::probs will be doubled in that case */
++
++#ifdef _LZMA_PROB32
++#define CLzmaProb UInt32
++#else
++#define CLzmaProb UInt16
++#endif
++
++
++/* ---------- LZMA Properties ---------- */
++
++#define LZMA_PROPS_SIZE 5
++
++typedef struct _CLzmaProps
++{
++ unsigned lc, lp, pb;
++ UInt32 dicSize;
++} CLzmaProps;
++
++/* LzmaProps_Decode - decodes properties
++Returns:
++ SZ_OK
++ SZ_ERROR_UNSUPPORTED - Unsupported properties
++*/
++
++SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size);
++
++
++/* ---------- LZMA Decoder state ---------- */
++
++/* LZMA_REQUIRED_INPUT_MAX = number of required input bytes for worst case.
++ Num bits = log2((2^11 / 31) ^ 22) + 26 < 134 + 26 = 160; */
++
++#define LZMA_REQUIRED_INPUT_MAX 20
++
++typedef struct
++{
++ CLzmaProps prop;
++ CLzmaProb *probs;
++ Byte *dic;
++ const Byte *buf;
++ UInt32 range, code;
++ SizeT dicPos;
++ SizeT dicBufSize;
++ UInt32 processedPos;
++ UInt32 checkDicSize;
++ unsigned state;
++ UInt32 reps[4];
++ unsigned remainLen;
++ int needFlush;
++ int needInitState;
++ UInt32 numProbs;
++ unsigned tempBufSize;
++ Byte tempBuf[LZMA_REQUIRED_INPUT_MAX];
++} CLzmaDec;
++
++#define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; }
++
++void LzmaDec_Init(CLzmaDec *p);
++
++/* There are two types of LZMA streams:
++ 0) Stream with end mark. That end mark adds about 6 bytes to compressed size.
++ 1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */
++
++typedef enum
++{
++ LZMA_FINISH_ANY, /* finish at any point */
++ LZMA_FINISH_END /* block must be finished at the end */
++} ELzmaFinishMode;
++
++/* ELzmaFinishMode has meaning only if the decoding reaches output limit !!!
++
++ You must use LZMA_FINISH_END, when you know that current output buffer
++ covers last bytes of block. In other cases you must use LZMA_FINISH_ANY.
++
++ If LZMA decoder sees end marker before reaching output limit, it returns SZ_OK,
++ and output value of destLen will be less than output buffer size limit.
++ You can check status result also.
++
++ You can use multiple checks to test data integrity after full decompression:
++ 1) Check Result and "status" variable.
++ 2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize.
++ 3) Check that output(srcLen) = compressedSize, if you know real compressedSize.
++ You must use correct finish mode in that case. */
++
++typedef enum
++{
++ LZMA_STATUS_NOT_SPECIFIED, /* use main error code instead */
++ LZMA_STATUS_FINISHED_WITH_MARK, /* stream was finished with end mark. */
++ LZMA_STATUS_NOT_FINISHED, /* stream was not finished */
++ LZMA_STATUS_NEEDS_MORE_INPUT, /* you must provide more input bytes */
++ LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK /* there is probability that stream was finished without end mark */
++} ELzmaStatus;
++
++/* ELzmaStatus is used only as output value for function call */
++
++
++/* ---------- Interfaces ---------- */
++
++/* There are 3 levels of interfaces:
++ 1) Dictionary Interface
++ 2) Buffer Interface
++ 3) One Call Interface
++ You can select any of these interfaces, but don't mix functions from different
++ groups for same object. */
++
++
++/* There are two variants to allocate state for Dictionary Interface:
++ 1) LzmaDec_Allocate / LzmaDec_Free
++ 2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs
++ You can use variant 2, if you set dictionary buffer manually.
++ For Buffer Interface you must always use variant 1.
++
++LzmaDec_Allocate* can return:
++ SZ_OK
++ SZ_ERROR_MEM - Memory allocation error
++ SZ_ERROR_UNSUPPORTED - Unsupported properties
++*/
++
++SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc);
++void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc);
++
++SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc);
++void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc);
++
++/* ---------- Dictionary Interface ---------- */
++
++/* You can use it, if you want to eliminate the overhead for data copying from
++ dictionary to some other external buffer.
++ You must work with CLzmaDec variables directly in this interface.
++
++ STEPS:
++ LzmaDec_Constr()
++ LzmaDec_Allocate()
++ for (each new stream)
++ {
++ LzmaDec_Init()
++ while (it needs more decompression)
++ {
++ LzmaDec_DecodeToDic()
++ use data from CLzmaDec::dic and update CLzmaDec::dicPos
++ }
++ }
++ LzmaDec_Free()
++*/
++
++/* LzmaDec_DecodeToDic
++
++ The decoding to internal dictionary buffer (CLzmaDec::dic).
++ You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!!
++
++finishMode:
++ It has meaning only if the decoding reaches output limit (dicLimit).
++ LZMA_FINISH_ANY - Decode just dicLimit bytes.
++ LZMA_FINISH_END - Stream must be finished after dicLimit.
++
++Returns:
++ SZ_OK
++ status:
++ LZMA_STATUS_FINISHED_WITH_MARK
++ LZMA_STATUS_NOT_FINISHED
++ LZMA_STATUS_NEEDS_MORE_INPUT
++ LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
++ SZ_ERROR_DATA - Data error
++*/
++
++SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit,
++ const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
++
++
++/* ---------- Buffer Interface ---------- */
++
++/* It's zlib-like interface.
++ See LzmaDec_DecodeToDic description for information about STEPS and return results,
++ but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need
++ to work with CLzmaDec variables manually.
++
++finishMode:
++ It has meaning only if the decoding reaches output limit (*destLen).
++ LZMA_FINISH_ANY - Decode just destLen bytes.
++ LZMA_FINISH_END - Stream must be finished after (*destLen).
++*/
++
++SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
++ const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
++
++
++/* ---------- One Call Interface ---------- */
++
++/* LzmaDecode
++
++finishMode:
++ It has meaning only if the decoding reaches output limit (*destLen).
++ LZMA_FINISH_ANY - Decode just destLen bytes.
++ LZMA_FINISH_END - Stream must be finished after (*destLen).
++
++Returns:
++ SZ_OK
++ status:
++ LZMA_STATUS_FINISHED_WITH_MARK
++ LZMA_STATUS_NOT_FINISHED
++ LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
++ SZ_ERROR_DATA - Data error
++ SZ_ERROR_MEM - Memory allocation error
++ SZ_ERROR_UNSUPPORTED - Unsupported properties
++ SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src).
++*/
++
++SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
++ const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
++ ELzmaStatus *status, ISzAlloc *alloc);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+--- /dev/null
++++ b/include/linux/lzma/LzmaEnc.h
+@@ -0,0 +1,80 @@
++/* LzmaEnc.h -- LZMA Encoder
++2009-02-07 : Igor Pavlov : Public domain */
++
++#ifndef __LZMA_ENC_H
++#define __LZMA_ENC_H
++
++#include "Types.h"
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#define LZMA_PROPS_SIZE 5
++
++typedef struct _CLzmaEncProps
++{
++ int level; /* 0 <= level <= 9 */
++ UInt32 dictSize; /* (1 << 12) <= dictSize <= (1 << 27) for 32-bit version
++ (1 << 12) <= dictSize <= (1 << 30) for 64-bit version
++ default = (1 << 24) */
++ int lc; /* 0 <= lc <= 8, default = 3 */
++ int lp; /* 0 <= lp <= 4, default = 0 */
++ int pb; /* 0 <= pb <= 4, default = 2 */
++ int algo; /* 0 - fast, 1 - normal, default = 1 */
++ int fb; /* 5 <= fb <= 273, default = 32 */
++ int btMode; /* 0 - hashChain Mode, 1 - binTree mode - normal, default = 1 */
++ int numHashBytes; /* 2, 3 or 4, default = 4 */
++ UInt32 mc; /* 1 <= mc <= (1 << 30), default = 32 */
++ unsigned writeEndMark; /* 0 - do not write EOPM, 1 - write EOPM, default = 0 */
++ int numThreads; /* 1 or 2, default = 2 */
++} CLzmaEncProps;
++
++void LzmaEncProps_Init(CLzmaEncProps *p);
++void LzmaEncProps_Normalize(CLzmaEncProps *p);
++UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2);
++
++
++/* ---------- CLzmaEncHandle Interface ---------- */
++
++/* LzmaEnc_* functions can return the following exit codes:
++Returns:
++ SZ_OK - OK
++ SZ_ERROR_MEM - Memory allocation error
++ SZ_ERROR_PARAM - Incorrect paramater in props
++ SZ_ERROR_WRITE - Write callback error.
++ SZ_ERROR_PROGRESS - some break from progress callback
++ SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version)
++*/
++
++typedef void * CLzmaEncHandle;
++
++CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc);
++void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig);
++SRes LzmaEnc_SetProps(CLzmaEncHandle p, const CLzmaEncProps *props);
++SRes LzmaEnc_WriteProperties(CLzmaEncHandle p, Byte *properties, SizeT *size);
++SRes LzmaEnc_Encode(CLzmaEncHandle p, ISeqOutStream *outStream, ISeqInStream *inStream,
++ ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
++SRes LzmaEnc_MemEncode(CLzmaEncHandle p, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
++ int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
++
++/* ---------- One Call Interface ---------- */
++
++/* LzmaEncode
++Return code:
++ SZ_OK - OK
++ SZ_ERROR_MEM - Memory allocation error
++ SZ_ERROR_PARAM - Incorrect paramater
++ SZ_ERROR_OUTPUT_EOF - output buffer overflow
++ SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version)
++*/
++
++SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
++ const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
++ ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+--- /dev/null
++++ b/include/linux/lzma/Types.h
+@@ -0,0 +1,226 @@
++/* Types.h -- Basic types
++2009-11-23 : Igor Pavlov : Public domain */
++
++#ifndef __7Z_TYPES_H
++#define __7Z_TYPES_H
++
++#include <stddef.h>
++
++#ifdef _WIN32
++#include <windows.h>
++#endif
++
++#ifndef EXTERN_C_BEGIN
++#ifdef __cplusplus
++#define EXTERN_C_BEGIN extern "C" {
++#define EXTERN_C_END }
++#else
++#define EXTERN_C_BEGIN
++#define EXTERN_C_END
++#endif
++#endif
++
++EXTERN_C_BEGIN
++
++#define SZ_OK 0
++
++#define SZ_ERROR_DATA 1
++#define SZ_ERROR_MEM 2
++#define SZ_ERROR_CRC 3
++#define SZ_ERROR_UNSUPPORTED 4
++#define SZ_ERROR_PARAM 5
++#define SZ_ERROR_INPUT_EOF 6
++#define SZ_ERROR_OUTPUT_EOF 7
++#define SZ_ERROR_READ 8
++#define SZ_ERROR_WRITE 9
++#define SZ_ERROR_PROGRESS 10
++#define SZ_ERROR_FAIL 11
++#define SZ_ERROR_THREAD 12
++
++#define SZ_ERROR_ARCHIVE 16
++#define SZ_ERROR_NO_ARCHIVE 17
++
++typedef int SRes;
++
++#ifdef _WIN32
++typedef DWORD WRes;
++#else
++typedef int WRes;
++#endif
++
++#ifndef RINOK
++#define RINOK(x) { int __result__ = (x); if (__result__ != 0) return __result__; }
++#endif
++
++typedef unsigned char Byte;
++typedef short Int16;
++typedef unsigned short UInt16;
++
++#ifdef _LZMA_UINT32_IS_ULONG
++typedef long Int32;
++typedef unsigned long UInt32;
++#else
++typedef int Int32;
++typedef unsigned int UInt32;
++#endif
++
++#ifdef _SZ_NO_INT_64
++
++/* define _SZ_NO_INT_64, if your compiler doesn't support 64-bit integers.
++ NOTES: Some code will work incorrectly in that case! */
++
++typedef long Int64;
++typedef unsigned long UInt64;
++
++#else
++
++#if defined(_MSC_VER) || defined(__BORLANDC__)
++typedef __int64 Int64;
++typedef unsigned __int64 UInt64;
++#else
++typedef long long int Int64;
++typedef unsigned long long int UInt64;
++#endif
++
++#endif
++
++#ifdef _LZMA_NO_SYSTEM_SIZE_T
++typedef UInt32 SizeT;
++#else
++typedef size_t SizeT;
++#endif
++
++typedef int Bool;
++#define True 1
++#define False 0
++
++
++#ifdef _WIN32
++#define MY_STD_CALL __stdcall
++#else
++#define MY_STD_CALL
++#endif
++
++#ifdef _MSC_VER
++
++#if _MSC_VER >= 1300
++#define MY_NO_INLINE __declspec(noinline)
++#else
++#define MY_NO_INLINE
++#endif
++
++#define MY_CDECL __cdecl
++#define MY_FAST_CALL __fastcall
++
++#else
++
++#define MY_CDECL
++#define MY_FAST_CALL
++
++#endif
++
++
++/* The following interfaces use first parameter as pointer to structure */
++
++typedef struct
++{
++ SRes (*Read)(void *p, void *buf, size_t *size);
++ /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
++ (output(*size) < input(*size)) is allowed */
++} ISeqInStream;
++
++/* it can return SZ_ERROR_INPUT_EOF */
++SRes SeqInStream_Read(ISeqInStream *stream, void *buf, size_t size);
++SRes SeqInStream_Read2(ISeqInStream *stream, void *buf, size_t size, SRes errorType);
++SRes SeqInStream_ReadByte(ISeqInStream *stream, Byte *buf);
++
++typedef struct
++{
++ size_t (*Write)(void *p, const void *buf, size_t size);
++ /* Returns: result - the number of actually written bytes.
++ (result < size) means error */
++} ISeqOutStream;
++
++typedef enum
++{
++ SZ_SEEK_SET = 0,
++ SZ_SEEK_CUR = 1,
++ SZ_SEEK_END = 2
++} ESzSeek;
++
++typedef struct
++{
++ SRes (*Read)(void *p, void *buf, size_t *size); /* same as ISeqInStream::Read */
++ SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
++} ISeekInStream;
++
++typedef struct
++{
++ SRes (*Look)(void *p, void **buf, size_t *size);
++ /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
++ (output(*size) > input(*size)) is not allowed
++ (output(*size) < input(*size)) is allowed */
++ SRes (*Skip)(void *p, size_t offset);
++ /* offset must be <= output(*size) of Look */
++
++ SRes (*Read)(void *p, void *buf, size_t *size);
++ /* reads directly (without buffer). It's same as ISeqInStream::Read */
++ SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
++} ILookInStream;
++
++SRes LookInStream_LookRead(ILookInStream *stream, void *buf, size_t *size);
++SRes LookInStream_SeekTo(ILookInStream *stream, UInt64 offset);
++
++/* reads via ILookInStream::Read */
++SRes LookInStream_Read2(ILookInStream *stream, void *buf, size_t size, SRes errorType);
++SRes LookInStream_Read(ILookInStream *stream, void *buf, size_t size);
++
++#define LookToRead_BUF_SIZE (1 << 14)
++
++typedef struct
++{
++ ILookInStream s;
++ ISeekInStream *realStream;
++ size_t pos;
++ size_t size;
++ Byte buf[LookToRead_BUF_SIZE];
++} CLookToRead;
++
++void LookToRead_CreateVTable(CLookToRead *p, int lookahead);
++void LookToRead_Init(CLookToRead *p);
++
++typedef struct
++{
++ ISeqInStream s;
++ ILookInStream *realStream;
++} CSecToLook;
++
++void SecToLook_CreateVTable(CSecToLook *p);
++
++typedef struct
++{
++ ISeqInStream s;
++ ILookInStream *realStream;
++} CSecToRead;
++
++void SecToRead_CreateVTable(CSecToRead *p);
++
++typedef struct
++{
++ SRes (*Progress)(void *p, UInt64 inSize, UInt64 outSize);
++ /* Returns: result. (result != SZ_OK) means break.
++ Value (UInt64)(Int64)-1 for size means unknown value. */
++} ICompressProgress;
++
++typedef struct
++{
++ void *(*Alloc)(void *p, size_t size);
++ void (*Free)(void *p, void *address); /* address can be 0 */
++} ISzAlloc;
++
++#define IAlloc_Alloc(p, size) (p)->Alloc((p), size)
++#define IAlloc_Free(p, a) (p)->Free((p), a)
++
++EXTERN_C_END
++
++#endif
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -188,6 +188,12 @@ config LZO_DECOMPRESS
+
+ source "lib/xz/Kconfig"
+
++config LZMA_COMPRESS
++ tristate
++
++config LZMA_DECOMPRESS
++ tristate
++
+ #
+ # These all provide a common interface (hence the apparent duplication with
+ # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
+--- a/lib/Makefile
++++ b/lib/Makefile
+@@ -2,6 +2,16 @@
+ # Makefile for some libs needed in the kernel.
+ #
+
++ifdef CONFIG_JFFS2_ZLIB
++ CONFIG_ZLIB_INFLATE:=y
++ CONFIG_ZLIB_DEFLATE:=y
++endif
++
++ifdef CONFIG_JFFS2_LZMA
++ CONFIG_LZMA_DECOMPRESS:=y
++ CONFIG_LZMA_COMPRESS:=y
++endif
++
+ ifdef CONFIG_FUNCTION_TRACER
+ ORIG_CFLAGS := $(KBUILD_CFLAGS)
+ KBUILD_CFLAGS = $(subst -pg,,$(ORIG_CFLAGS))
+@@ -73,6 +83,8 @@ obj-$(CONFIG_LZO_COMPRESS) += lzo/
+ obj-$(CONFIG_LZO_DECOMPRESS) += lzo/
+ obj-$(CONFIG_XZ_DEC) += xz/
+ obj-$(CONFIG_RAID6_PQ) += raid6/
++obj-$(CONFIG_LZMA_COMPRESS) += lzma/
++obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/
+
+ lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
+ lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
+--- /dev/null
++++ b/lib/lzma/LzFind.c
+@@ -0,0 +1,761 @@
++/* LzFind.c -- Match finder for LZ algorithms
++2009-04-22 : Igor Pavlov : Public domain */
++
++#include <string.h>
++
++#include "LzFind.h"
++#include "LzHash.h"
++
++#define kEmptyHashValue 0
++#define kMaxValForNormalize ((UInt32)0xFFFFFFFF)
++#define kNormalizeStepMin (1 << 10) /* it must be power of 2 */
++#define kNormalizeMask (~(kNormalizeStepMin - 1))
++#define kMaxHistorySize ((UInt32)3 << 30)
++
++#define kStartMaxLen 3
++
++static void LzInWindow_Free(CMatchFinder *p, ISzAlloc *alloc)
++{
++ if (!p->directInput)
++ {
++ alloc->Free(alloc, p->bufferBase);
++ p->bufferBase = 0;
++ }
++}
++
++/* keepSizeBefore + keepSizeAfter + keepSizeReserv must be < 4G) */
++
++static int LzInWindow_Create(CMatchFinder *p, UInt32 keepSizeReserv, ISzAlloc *alloc)
++{
++ UInt32 blockSize = p->keepSizeBefore + p->keepSizeAfter + keepSizeReserv;
++ if (p->directInput)
++ {
++ p->blockSize = blockSize;
++ return 1;
++ }
++ if (p->bufferBase == 0 || p->blockSize != blockSize)
++ {
++ LzInWindow_Free(p, alloc);
++ p->blockSize = blockSize;
++ p->bufferBase = (Byte *)alloc->Alloc(alloc, (size_t)blockSize);
++ }
++ return (p->bufferBase != 0);
++}
++
++Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
++Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
++
++UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
++
++void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
++{
++ p->posLimit -= subValue;
++ p->pos -= subValue;
++ p->streamPos -= subValue;
++}
++
++static void MatchFinder_ReadBlock(CMatchFinder *p)
++{
++ if (p->streamEndWasReached || p->result != SZ_OK)
++ return;
++ if (p->directInput)
++ {
++ UInt32 curSize = 0xFFFFFFFF - p->streamPos;
++ if (curSize > p->directInputRem)
++ curSize = (UInt32)p->directInputRem;
++ p->directInputRem -= curSize;
++ p->streamPos += curSize;
++ if (p->directInputRem == 0)
++ p->streamEndWasReached = 1;
++ return;
++ }
++ for (;;)
++ {
++ Byte *dest = p->buffer + (p->streamPos - p->pos);
++ size_t size = (p->bufferBase + p->blockSize - dest);
++ if (size == 0)
++ return;
++ p->result = p->stream->Read(p->stream, dest, &size);
++ if (p->result != SZ_OK)
++ return;
++ if (size == 0)
++ {
++ p->streamEndWasReached = 1;
++ return;
++ }
++ p->streamPos += (UInt32)size;
++ if (p->streamPos - p->pos > p->keepSizeAfter)
++ return;
++ }
++}
++
++void MatchFinder_MoveBlock(CMatchFinder *p)
++{
++ memmove(p->bufferBase,
++ p->buffer - p->keepSizeBefore,
++ (size_t)(p->streamPos - p->pos + p->keepSizeBefore));
++ p->buffer = p->bufferBase + p->keepSizeBefore;
++}
++
++int MatchFinder_NeedMove(CMatchFinder *p)
++{
++ if (p->directInput)
++ return 0;
++ /* if (p->streamEndWasReached) return 0; */
++ return ((size_t)(p->bufferBase + p->blockSize - p->buffer) <= p->keepSizeAfter);
++}
++
++void MatchFinder_ReadIfRequired(CMatchFinder *p)
++{
++ if (p->streamEndWasReached)
++ return;
++ if (p->keepSizeAfter >= p->streamPos - p->pos)
++ MatchFinder_ReadBlock(p);
++}
++
++static void MatchFinder_CheckAndMoveAndRead(CMatchFinder *p)
++{
++ if (MatchFinder_NeedMove(p))
++ MatchFinder_MoveBlock(p);
++ MatchFinder_ReadBlock(p);
++}
++
++static void MatchFinder_SetDefaultSettings(CMatchFinder *p)
++{
++ p->cutValue = 32;
++ p->btMode = 1;
++ p->numHashBytes = 4;
++ p->bigHash = 0;
++}
++
++#define kCrcPoly 0xEDB88320
++
++void MatchFinder_Construct(CMatchFinder *p)
++{
++ UInt32 i;
++ p->bufferBase = 0;
++ p->directInput = 0;
++ p->hash = 0;
++ MatchFinder_SetDefaultSettings(p);
++
++ for (i = 0; i < 256; i++)
++ {
++ UInt32 r = i;
++ int j;
++ for (j = 0; j < 8; j++)
++ r = (r >> 1) ^ (kCrcPoly & ~((r & 1) - 1));
++ p->crc[i] = r;
++ }
++}
++
++static void MatchFinder_FreeThisClassMemory(CMatchFinder *p, ISzAlloc *alloc)
++{
++ alloc->Free(alloc, p->hash);
++ p->hash = 0;
++}
++
++void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc)
++{
++ MatchFinder_FreeThisClassMemory(p, alloc);
++ LzInWindow_Free(p, alloc);
++}
++
++static CLzRef* AllocRefs(UInt32 num, ISzAlloc *alloc)
++{
++ size_t sizeInBytes = (size_t)num * sizeof(CLzRef);
++ if (sizeInBytes / sizeof(CLzRef) != num)
++ return 0;
++ return (CLzRef *)alloc->Alloc(alloc, sizeInBytes);
++}
++
++int MatchFinder_Create(CMatchFinder *p, UInt32 historySize,
++ UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
++ ISzAlloc *alloc)
++{
++ UInt32 sizeReserv;
++ if (historySize > kMaxHistorySize)
++ {
++ MatchFinder_Free(p, alloc);
++ return 0;
++ }
++ sizeReserv = historySize >> 1;
++ if (historySize > ((UInt32)2 << 30))
++ sizeReserv = historySize >> 2;
++ sizeReserv += (keepAddBufferBefore + matchMaxLen + keepAddBufferAfter) / 2 + (1 << 19);
++
++ p->keepSizeBefore = historySize + keepAddBufferBefore + 1;
++ p->keepSizeAfter = matchMaxLen + keepAddBufferAfter;
++ /* we need one additional byte, since we use MoveBlock after pos++ and before dictionary using */
++ if (LzInWindow_Create(p, sizeReserv, alloc))
++ {
++ UInt32 newCyclicBufferSize = historySize + 1;
++ UInt32 hs;
++ p->matchMaxLen = matchMaxLen;
++ {
++ p->fixedHashSize = 0;
++ if (p->numHashBytes == 2)
++ hs = (1 << 16) - 1;
++ else
++ {
++ hs = historySize - 1;
++ hs |= (hs >> 1);
++ hs |= (hs >> 2);
++ hs |= (hs >> 4);
++ hs |= (hs >> 8);
++ hs >>= 1;
++ hs |= 0xFFFF; /* don't change it! It's required for Deflate */
++ if (hs > (1 << 24))
++ {
++ if (p->numHashBytes == 3)
++ hs = (1 << 24) - 1;
++ else
++ hs >>= 1;
++ }
++ }
++ p->hashMask = hs;
++ hs++;
++ if (p->numHashBytes > 2) p->fixedHashSize += kHash2Size;
++ if (p->numHashBytes > 3) p->fixedHashSize += kHash3Size;
++ if (p->numHashBytes > 4) p->fixedHashSize += kHash4Size;
++ hs += p->fixedHashSize;
++ }
++
++ {
++ UInt32 prevSize = p->hashSizeSum + p->numSons;
++ UInt32 newSize;
++ p->historySize = historySize;
++ p->hashSizeSum = hs;
++ p->cyclicBufferSize = newCyclicBufferSize;
++ p->numSons = (p->btMode ? newCyclicBufferSize * 2 : newCyclicBufferSize);
++ newSize = p->hashSizeSum + p->numSons;
++ if (p->hash != 0 && prevSize == newSize)
++ return 1;
++ MatchFinder_FreeThisClassMemory(p, alloc);
++ p->hash = AllocRefs(newSize, alloc);
++ if (p->hash != 0)
++ {
++ p->son = p->hash + p->hashSizeSum;
++ return 1;
++ }
++ }
++ }
++ MatchFinder_Free(p, alloc);
++ return 0;
++}
++
++static void MatchFinder_SetLimits(CMatchFinder *p)
++{
++ UInt32 limit = kMaxValForNormalize - p->pos;
++ UInt32 limit2 = p->cyclicBufferSize - p->cyclicBufferPos;
++ if (limit2 < limit)
++ limit = limit2;
++ limit2 = p->streamPos - p->pos;
++ if (limit2 <= p->keepSizeAfter)
++ {
++ if (limit2 > 0)
++ limit2 = 1;
++ }
++ else
++ limit2 -= p->keepSizeAfter;
++ if (limit2 < limit)
++ limit = limit2;
++ {
++ UInt32 lenLimit = p->streamPos - p->pos;
++ if (lenLimit > p->matchMaxLen)
++ lenLimit = p->matchMaxLen;
++ p->lenLimit = lenLimit;
++ }
++ p->posLimit = p->pos + limit;
++}
++
++void MatchFinder_Init(CMatchFinder *p)
++{
++ UInt32 i;
++ for (i = 0; i < p->hashSizeSum; i++)
++ p->hash[i] = kEmptyHashValue;
++ p->cyclicBufferPos = 0;
++ p->buffer = p->bufferBase;
++ p->pos = p->streamPos = p->cyclicBufferSize;
++ p->result = SZ_OK;
++ p->streamEndWasReached = 0;
++ MatchFinder_ReadBlock(p);
++ MatchFinder_SetLimits(p);
++}
++
++static UInt32 MatchFinder_GetSubValue(CMatchFinder *p)
++{
++ return (p->pos - p->historySize - 1) & kNormalizeMask;
++}
++
++void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
++{
++ UInt32 i;
++ for (i = 0; i < numItems; i++)
++ {
++ UInt32 value = items[i];
++ if (value <= subValue)
++ value = kEmptyHashValue;
++ else
++ value -= subValue;
++ items[i] = value;
++ }
++}
++
++static void MatchFinder_Normalize(CMatchFinder *p)
++{
++ UInt32 subValue = MatchFinder_GetSubValue(p);
++ MatchFinder_Normalize3(subValue, p->hash, p->hashSizeSum + p->numSons);
++ MatchFinder_ReduceOffsets(p, subValue);
++}
++
++static void MatchFinder_CheckLimits(CMatchFinder *p)
++{
++ if (p->pos == kMaxValForNormalize)
++ MatchFinder_Normalize(p);
++ if (!p->streamEndWasReached && p->keepSizeAfter == p->streamPos - p->pos)
++ MatchFinder_CheckAndMoveAndRead(p);
++ if (p->cyclicBufferPos == p->cyclicBufferSize)
++ p->cyclicBufferPos = 0;
++ MatchFinder_SetLimits(p);
++}
++
++static UInt32 * Hc_GetMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
++ UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
++ UInt32 *distances, UInt32 maxLen)
++{
++ son[_cyclicBufferPos] = curMatch;
++ for (;;)
++ {
++ UInt32 delta = pos - curMatch;
++ if (cutValue-- == 0 || delta >= _cyclicBufferSize)
++ return distances;
++ {
++ const Byte *pb = cur - delta;
++ curMatch = son[_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)];
++ if (pb[maxLen] == cur[maxLen] && *pb == *cur)
++ {
++ UInt32 len = 0;
++ while (++len != lenLimit)
++ if (pb[len] != cur[len])
++ break;
++ if (maxLen < len)
++ {
++ *distances++ = maxLen = len;
++ *distances++ = delta - 1;
++ if (len == lenLimit)
++ return distances;
++ }
++ }
++ }
++ }
++}
++
++UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
++ UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
++ UInt32 *distances, UInt32 maxLen)
++{
++ CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1;
++ CLzRef *ptr1 = son + (_cyclicBufferPos << 1);
++ UInt32 len0 = 0, len1 = 0;
++ for (;;)
++ {
++ UInt32 delta = pos - curMatch;
++ if (cutValue-- == 0 || delta >= _cyclicBufferSize)
++ {
++ *ptr0 = *ptr1 = kEmptyHashValue;
++ return distances;
++ }
++ {
++ CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1);
++ const Byte *pb = cur - delta;
++ UInt32 len = (len0 < len1 ? len0 : len1);
++ if (pb[len] == cur[len])
++ {
++ if (++len != lenLimit && pb[len] == cur[len])
++ while (++len != lenLimit)
++ if (pb[len] != cur[len])
++ break;
++ if (maxLen < len)
++ {
++ *distances++ = maxLen = len;
++ *distances++ = delta - 1;
++ if (len == lenLimit)
++ {
++ *ptr1 = pair[0];
++ *ptr0 = pair[1];
++ return distances;
++ }
++ }
++ }
++ if (pb[len] < cur[len])
++ {
++ *ptr1 = curMatch;
++ ptr1 = pair + 1;
++ curMatch = *ptr1;
++ len1 = len;
++ }
++ else
++ {
++ *ptr0 = curMatch;
++ ptr0 = pair;
++ curMatch = *ptr0;
++ len0 = len;
++ }
++ }
++ }
++}
++
++static void SkipMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
++ UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue)
++{
++ CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1;
++ CLzRef *ptr1 = son + (_cyclicBufferPos << 1);
++ UInt32 len0 = 0, len1 = 0;
++ for (;;)
++ {
++ UInt32 delta = pos - curMatch;
++ if (cutValue-- == 0 || delta >= _cyclicBufferSize)
++ {
++ *ptr0 = *ptr1 = kEmptyHashValue;
++ return;
++ }
++ {
++ CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1);
++ const Byte *pb = cur - delta;
++ UInt32 len = (len0 < len1 ? len0 : len1);
++ if (pb[len] == cur[len])
++ {
++ while (++len != lenLimit)
++ if (pb[len] != cur[len])
++ break;
++ {
++ if (len == lenLimit)
++ {
++ *ptr1 = pair[0];
++ *ptr0 = pair[1];
++ return;
++ }
++ }
++ }
++ if (pb[len] < cur[len])
++ {
++ *ptr1 = curMatch;
++ ptr1 = pair + 1;
++ curMatch = *ptr1;
++ len1 = len;
++ }
++ else
++ {
++ *ptr0 = curMatch;
++ ptr0 = pair;
++ curMatch = *ptr0;
++ len0 = len;
++ }
++ }
++ }
++}
++
++#define MOVE_POS \
++ ++p->cyclicBufferPos; \
++ p->buffer++; \
++ if (++p->pos == p->posLimit) MatchFinder_CheckLimits(p);
++
++#define MOVE_POS_RET MOVE_POS return offset;
++
++static void MatchFinder_MovePos(CMatchFinder *p) { MOVE_POS; }
++
++#define GET_MATCHES_HEADER2(minLen, ret_op) \
++ UInt32 lenLimit; UInt32 hashValue; const Byte *cur; UInt32 curMatch; \
++ lenLimit = p->lenLimit; { if (lenLimit < minLen) { MatchFinder_MovePos(p); ret_op; }} \
++ cur = p->buffer;
++
++#define GET_MATCHES_HEADER(minLen) GET_MATCHES_HEADER2(minLen, return 0)
++#define SKIP_HEADER(minLen) GET_MATCHES_HEADER2(minLen, continue)
++
++#define MF_PARAMS(p) p->pos, p->buffer, p->son, p->cyclicBufferPos, p->cyclicBufferSize, p->cutValue
++
++#define GET_MATCHES_FOOTER(offset, maxLen) \
++ offset = (UInt32)(GetMatchesSpec1(lenLimit, curMatch, MF_PARAMS(p), \
++ distances + offset, maxLen) - distances); MOVE_POS_RET;
++
++#define SKIP_FOOTER \
++ SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MOVE_POS;
++
++static UInt32 Bt2_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++ UInt32 offset;
++ GET_MATCHES_HEADER(2)
++ HASH2_CALC;
++ curMatch = p->hash[hashValue];
++ p->hash[hashValue] = p->pos;
++ offset = 0;
++ GET_MATCHES_FOOTER(offset, 1)
++}
++
++UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++ UInt32 offset;
++ GET_MATCHES_HEADER(3)
++ HASH_ZIP_CALC;
++ curMatch = p->hash[hashValue];
++ p->hash[hashValue] = p->pos;
++ offset = 0;
++ GET_MATCHES_FOOTER(offset, 2)
++}
++
++static UInt32 Bt3_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++ UInt32 hash2Value, delta2, maxLen, offset;
++ GET_MATCHES_HEADER(3)
++
++ HASH3_CALC;
++
++ delta2 = p->pos - p->hash[hash2Value];
++ curMatch = p->hash[kFix3HashSize + hashValue];
++
++ p->hash[hash2Value] =
++ p->hash[kFix3HashSize + hashValue] = p->pos;
++
++
++ maxLen = 2;
++ offset = 0;
++ if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
++ {
++ for (; maxLen != lenLimit; maxLen++)
++ if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
++ break;
++ distances[0] = maxLen;
++ distances[1] = delta2 - 1;
++ offset = 2;
++ if (maxLen == lenLimit)
++ {
++ SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
++ MOVE_POS_RET;
++ }
++ }
++ GET_MATCHES_FOOTER(offset, maxLen)
++}
++
++static UInt32 Bt4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++ UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
++ GET_MATCHES_HEADER(4)
++
++ HASH4_CALC;
++
++ delta2 = p->pos - p->hash[ hash2Value];
++ delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
++ curMatch = p->hash[kFix4HashSize + hashValue];
++
++ p->hash[ hash2Value] =
++ p->hash[kFix3HashSize + hash3Value] =
++ p->hash[kFix4HashSize + hashValue] = p->pos;
++
++ maxLen = 1;
++ offset = 0;
++ if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
++ {
++ distances[0] = maxLen = 2;
++ distances[1] = delta2 - 1;
++ offset = 2;
++ }
++ if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
++ {
++ maxLen = 3;
++ distances[offset + 1] = delta3 - 1;
++ offset += 2;
++ delta2 = delta3;
++ }
++ if (offset != 0)
++ {
++ for (; maxLen != lenLimit; maxLen++)
++ if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
++ break;
++ distances[offset - 2] = maxLen;
++ if (maxLen == lenLimit)
++ {
++ SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
++ MOVE_POS_RET;
++ }
++ }
++ if (maxLen < 3)
++ maxLen = 3;
++ GET_MATCHES_FOOTER(offset, maxLen)
++}
++
++static UInt32 Hc4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++ UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
++ GET_MATCHES_HEADER(4)
++
++ HASH4_CALC;
++
++ delta2 = p->pos - p->hash[ hash2Value];
++ delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
++ curMatch = p->hash[kFix4HashSize + hashValue];
++
++ p->hash[ hash2Value] =
++ p->hash[kFix3HashSize + hash3Value] =
++ p->hash[kFix4HashSize + hashValue] = p->pos;
++
++ maxLen = 1;
++ offset = 0;
++ if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
++ {
++ distances[0] = maxLen = 2;
++ distances[1] = delta2 - 1;
++ offset = 2;
++ }
++ if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
++ {
++ maxLen = 3;
++ distances[offset + 1] = delta3 - 1;
++ offset += 2;
++ delta2 = delta3;
++ }
++ if (offset != 0)
++ {
++ for (; maxLen != lenLimit; maxLen++)
++ if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
++ break;
++ distances[offset - 2] = maxLen;
++ if (maxLen == lenLimit)
++ {
++ p->son[p->cyclicBufferPos] = curMatch;
++ MOVE_POS_RET;
++ }
++ }
++ if (maxLen < 3)
++ maxLen = 3;
++ offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
++ distances + offset, maxLen) - (distances));
++ MOVE_POS_RET
++}
++
++UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++ UInt32 offset;
++ GET_MATCHES_HEADER(3)
++ HASH_ZIP_CALC;
++ curMatch = p->hash[hashValue];
++ p->hash[hashValue] = p->pos;
++ offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
++ distances, 2) - (distances));
++ MOVE_POS_RET
++}
++
++static void Bt2_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++ do
++ {
++ SKIP_HEADER(2)
++ HASH2_CALC;
++ curMatch = p->hash[hashValue];
++ p->hash[hashValue] = p->pos;
++ SKIP_FOOTER
++ }
++ while (--num != 0);
++}
++
++void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++ do
++ {
++ SKIP_HEADER(3)
++ HASH_ZIP_CALC;
++ curMatch = p->hash[hashValue];
++ p->hash[hashValue] = p->pos;
++ SKIP_FOOTER
++ }
++ while (--num != 0);
++}
++
++static void Bt3_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++ do
++ {
++ UInt32 hash2Value;
++ SKIP_HEADER(3)
++ HASH3_CALC;
++ curMatch = p->hash[kFix3HashSize + hashValue];
++ p->hash[hash2Value] =
++ p->hash[kFix3HashSize + hashValue] = p->pos;
++ SKIP_FOOTER
++ }
++ while (--num != 0);
++}
++
++static void Bt4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++ do
++ {
++ UInt32 hash2Value, hash3Value;
++ SKIP_HEADER(4)
++ HASH4_CALC;
++ curMatch = p->hash[kFix4HashSize + hashValue];
++ p->hash[ hash2Value] =
++ p->hash[kFix3HashSize + hash3Value] = p->pos;
++ p->hash[kFix4HashSize + hashValue] = p->pos;
++ SKIP_FOOTER
++ }
++ while (--num != 0);
++}
++
++static void Hc4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++ do
++ {
++ UInt32 hash2Value, hash3Value;
++ SKIP_HEADER(4)
++ HASH4_CALC;
++ curMatch = p->hash[kFix4HashSize + hashValue];
++ p->hash[ hash2Value] =
++ p->hash[kFix3HashSize + hash3Value] =
++ p->hash[kFix4HashSize + hashValue] = p->pos;
++ p->son[p->cyclicBufferPos] = curMatch;
++ MOVE_POS
++ }
++ while (--num != 0);
++}
++
++void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++ do
++ {
++ SKIP_HEADER(3)
++ HASH_ZIP_CALC;
++ curMatch = p->hash[hashValue];
++ p->hash[hashValue] = p->pos;
++ p->son[p->cyclicBufferPos] = curMatch;
++ MOVE_POS
++ }
++ while (--num != 0);
++}
++
++void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable)
++{
++ vTable->Init = (Mf_Init_Func)MatchFinder_Init;
++ vTable->GetIndexByte = (Mf_GetIndexByte_Func)MatchFinder_GetIndexByte;
++ vTable->GetNumAvailableBytes = (Mf_GetNumAvailableBytes_Func)MatchFinder_GetNumAvailableBytes;
++ vTable->GetPointerToCurrentPos = (Mf_GetPointerToCurrentPos_Func)MatchFinder_GetPointerToCurrentPos;
++ if (!p->btMode)
++ {
++ vTable->GetMatches = (Mf_GetMatches_Func)Hc4_MatchFinder_GetMatches;
++ vTable->Skip = (Mf_Skip_Func)Hc4_MatchFinder_Skip;
++ }
++ else if (p->numHashBytes == 2)
++ {
++ vTable->GetMatches = (Mf_GetMatches_Func)Bt2_MatchFinder_GetMatches;
++ vTable->Skip = (Mf_Skip_Func)Bt2_MatchFinder_Skip;
++ }
++ else if (p->numHashBytes == 3)
++ {
++ vTable->GetMatches = (Mf_GetMatches_Func)Bt3_MatchFinder_GetMatches;
++ vTable->Skip = (Mf_Skip_Func)Bt3_MatchFinder_Skip;
++ }
++ else
++ {
++ vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches;
++ vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip;
++ }
++}
+--- /dev/null
++++ b/lib/lzma/LzmaDec.c
+@@ -0,0 +1,999 @@
++/* LzmaDec.c -- LZMA Decoder
++2009-09-20 : Igor Pavlov : Public domain */
++
++#include "LzmaDec.h"
++
++#include <string.h>
++
++#define kNumTopBits 24
++#define kTopValue ((UInt32)1 << kNumTopBits)
++
++#define kNumBitModelTotalBits 11
++#define kBitModelTotal (1 << kNumBitModelTotalBits)
++#define kNumMoveBits 5
++
++#define RC_INIT_SIZE 5
++
++#define NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | (*buf++); }
++
++#define IF_BIT_0(p) ttt = *(p); NORMALIZE; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
++#define UPDATE_0(p) range = bound; *(p) = (CLzmaProb)(ttt + ((kBitModelTotal - ttt) >> kNumMoveBits));
++#define UPDATE_1(p) range -= bound; code -= bound; *(p) = (CLzmaProb)(ttt - (ttt >> kNumMoveBits));
++#define GET_BIT2(p, i, A0, A1) IF_BIT_0(p) \
++ { UPDATE_0(p); i = (i + i); A0; } else \
++ { UPDATE_1(p); i = (i + i) + 1; A1; }
++#define GET_BIT(p, i) GET_BIT2(p, i, ; , ;)
++
++#define TREE_GET_BIT(probs, i) { GET_BIT((probs + i), i); }
++#define TREE_DECODE(probs, limit, i) \
++ { i = 1; do { TREE_GET_BIT(probs, i); } while (i < limit); i -= limit; }
++
++/* #define _LZMA_SIZE_OPT */
++
++#ifdef _LZMA_SIZE_OPT
++#define TREE_6_DECODE(probs, i) TREE_DECODE(probs, (1 << 6), i)
++#else
++#define TREE_6_DECODE(probs, i) \
++ { i = 1; \
++ TREE_GET_BIT(probs, i); \
++ TREE_GET_BIT(probs, i); \
++ TREE_GET_BIT(probs, i); \
++ TREE_GET_BIT(probs, i); \
++ TREE_GET_BIT(probs, i); \
++ TREE_GET_BIT(probs, i); \
++ i -= 0x40; }
++#endif
++
++#define NORMALIZE_CHECK if (range < kTopValue) { if (buf >= bufLimit) return DUMMY_ERROR; range <<= 8; code = (code << 8) | (*buf++); }
++
++#define IF_BIT_0_CHECK(p) ttt = *(p); NORMALIZE_CHECK; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
++#define UPDATE_0_CHECK range = bound;
++#define UPDATE_1_CHECK range -= bound; code -= bound;
++#define GET_BIT2_CHECK(p, i, A0, A1) IF_BIT_0_CHECK(p) \
++ { UPDATE_0_CHECK; i = (i + i); A0; } else \
++ { UPDATE_1_CHECK; i = (i + i) + 1; A1; }
++#define GET_BIT_CHECK(p, i) GET_BIT2_CHECK(p, i, ; , ;)
++#define TREE_DECODE_CHECK(probs, limit, i) \
++ { i = 1; do { GET_BIT_CHECK(probs + i, i) } while (i < limit); i -= limit; }
++
++
++#define kNumPosBitsMax 4
++#define kNumPosStatesMax (1 << kNumPosBitsMax)
++
++#define kLenNumLowBits 3
++#define kLenNumLowSymbols (1 << kLenNumLowBits)
++#define kLenNumMidBits 3
++#define kLenNumMidSymbols (1 << kLenNumMidBits)
++#define kLenNumHighBits 8
++#define kLenNumHighSymbols (1 << kLenNumHighBits)
++
++#define LenChoice 0
++#define LenChoice2 (LenChoice + 1)
++#define LenLow (LenChoice2 + 1)
++#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
++#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
++#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
++
++
++#define kNumStates 12
++#define kNumLitStates 7
++
++#define kStartPosModelIndex 4
++#define kEndPosModelIndex 14
++#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
++
++#define kNumPosSlotBits 6
++#define kNumLenToPosStates 4
++
++#define kNumAlignBits 4
++#define kAlignTableSize (1 << kNumAlignBits)
++
++#define kMatchMinLen 2
++#define kMatchSpecLenStart (kMatchMinLen + kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
++
++#define IsMatch 0
++#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
++#define IsRepG0 (IsRep + kNumStates)
++#define IsRepG1 (IsRepG0 + kNumStates)
++#define IsRepG2 (IsRepG1 + kNumStates)
++#define IsRep0Long (IsRepG2 + kNumStates)
++#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
++#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
++#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
++#define LenCoder (Align + kAlignTableSize)
++#define RepLenCoder (LenCoder + kNumLenProbs)
++#define Literal (RepLenCoder + kNumLenProbs)
++
++#define LZMA_BASE_SIZE 1846
++#define LZMA_LIT_SIZE 768
++
++#define LzmaProps_GetNumProbs(p) ((UInt32)LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((p)->lc + (p)->lp)))
++
++#if Literal != LZMA_BASE_SIZE
++StopCompilingDueBUG
++#endif
++
++#define LZMA_DIC_MIN (1 << 12)
++
++/* First LZMA-symbol is always decoded.
++And it decodes new LZMA-symbols while (buf < bufLimit), but "buf" is without last normalization
++Out:
++ Result:
++ SZ_OK - OK
++ SZ_ERROR_DATA - Error
++ p->remainLen:
++ < kMatchSpecLenStart : normal remain
++ = kMatchSpecLenStart : finished
++ = kMatchSpecLenStart + 1 : Flush marker
++ = kMatchSpecLenStart + 2 : State Init Marker
++*/
++
++static int MY_FAST_CALL LzmaDec_DecodeReal(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
++{
++ CLzmaProb *probs = p->probs;
++
++ unsigned state = p->state;
++ UInt32 rep0 = p->reps[0], rep1 = p->reps[1], rep2 = p->reps[2], rep3 = p->reps[3];
++ unsigned pbMask = ((unsigned)1 << (p->prop.pb)) - 1;
++ unsigned lpMask = ((unsigned)1 << (p->prop.lp)) - 1;
++ unsigned lc = p->prop.lc;
++
++ Byte *dic = p->dic;
++ SizeT dicBufSize = p->dicBufSize;
++ SizeT dicPos = p->dicPos;
++
++ UInt32 processedPos = p->processedPos;
++ UInt32 checkDicSize = p->checkDicSize;
++ unsigned len = 0;
++
++ const Byte *buf = p->buf;
++ UInt32 range = p->range;
++ UInt32 code = p->code;
++
++ do
++ {
++ CLzmaProb *prob;
++ UInt32 bound;
++ unsigned ttt;
++ unsigned posState = processedPos & pbMask;
++
++ prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
++ IF_BIT_0(prob)
++ {
++ unsigned symbol;
++ UPDATE_0(prob);
++ prob = probs + Literal;
++ if (checkDicSize != 0 || processedPos != 0)
++ prob += (LZMA_LIT_SIZE * (((processedPos & lpMask) << lc) +
++ (dic[(dicPos == 0 ? dicBufSize : dicPos) - 1] >> (8 - lc))));
++
++ if (state < kNumLitStates)
++ {
++ state -= (state < 4) ? state : 3;
++ symbol = 1;
++ do { GET_BIT(prob + symbol, symbol) } while (symbol < 0x100);
++ }
++ else
++ {
++ unsigned matchByte = p->dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
++ unsigned offs = 0x100;
++ state -= (state < 10) ? 3 : 6;
++ symbol = 1;
++ do
++ {
++ unsigned bit;
++ CLzmaProb *probLit;
++ matchByte <<= 1;
++ bit = (matchByte & offs);
++ probLit = prob + offs + bit + symbol;
++ GET_BIT2(probLit, symbol, offs &= ~bit, offs &= bit)
++ }
++ while (symbol < 0x100);
++ }
++ dic[dicPos++] = (Byte)symbol;
++ processedPos++;
++ continue;
++ }
++ else
++ {
++ UPDATE_1(prob);
++ prob = probs + IsRep + state;
++ IF_BIT_0(prob)
++ {
++ UPDATE_0(prob);
++ state += kNumStates;
++ prob = probs + LenCoder;
++ }
++ else
++ {
++ UPDATE_1(prob);
++ if (checkDicSize == 0 && processedPos == 0)
++ return SZ_ERROR_DATA;
++ prob = probs + IsRepG0 + state;
++ IF_BIT_0(prob)
++ {
++ UPDATE_0(prob);
++ prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
++ IF_BIT_0(prob)
++ {
++ UPDATE_0(prob);
++ dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
++ dicPos++;
++ processedPos++;
++ state = state < kNumLitStates ? 9 : 11;
++ continue;
++ }
++ UPDATE_1(prob);
++ }
++ else
++ {
++ UInt32 distance;
++ UPDATE_1(prob);
++ prob = probs + IsRepG1 + state;
++ IF_BIT_0(prob)
++ {
++ UPDATE_0(prob);
++ distance = rep1;
++ }
++ else
++ {
++ UPDATE_1(prob);
++ prob = probs + IsRepG2 + state;
++ IF_BIT_0(prob)
++ {
++ UPDATE_0(prob);
++ distance = rep2;
++ }
++ else
++ {
++ UPDATE_1(prob);
++ distance = rep3;
++ rep3 = rep2;
++ }
++ rep2 = rep1;
++ }
++ rep1 = rep0;
++ rep0 = distance;
++ }
++ state = state < kNumLitStates ? 8 : 11;
++ prob = probs + RepLenCoder;
++ }
++ {
++ unsigned limit, offset;
++ CLzmaProb *probLen = prob + LenChoice;
++ IF_BIT_0(probLen)
++ {
++ UPDATE_0(probLen);
++ probLen = prob + LenLow + (posState << kLenNumLowBits);
++ offset = 0;
++ limit = (1 << kLenNumLowBits);
++ }
++ else
++ {
++ UPDATE_1(probLen);
++ probLen = prob + LenChoice2;
++ IF_BIT_0(probLen)
++ {
++ UPDATE_0(probLen);
++ probLen = prob + LenMid + (posState << kLenNumMidBits);
++ offset = kLenNumLowSymbols;
++ limit = (1 << kLenNumMidBits);
++ }
++ else
++ {
++ UPDATE_1(probLen);
++ probLen = prob + LenHigh;
++ offset = kLenNumLowSymbols + kLenNumMidSymbols;
++ limit = (1 << kLenNumHighBits);
++ }
++ }
++ TREE_DECODE(probLen, limit, len);
++ len += offset;
++ }
++
++ if (state >= kNumStates)
++ {
++ UInt32 distance;
++ prob = probs + PosSlot +
++ ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << kNumPosSlotBits);
++ TREE_6_DECODE(prob, distance);
++ if (distance >= kStartPosModelIndex)
++ {
++ unsigned posSlot = (unsigned)distance;
++ int numDirectBits = (int)(((distance >> 1) - 1));
++ distance = (2 | (distance & 1));
++ if (posSlot < kEndPosModelIndex)
++ {
++ distance <<= numDirectBits;
++ prob = probs + SpecPos + distance - posSlot - 1;
++ {
++ UInt32 mask = 1;
++ unsigned i = 1;
++ do
++ {
++ GET_BIT2(prob + i, i, ; , distance |= mask);
++ mask <<= 1;
++ }
++ while (--numDirectBits != 0);
++ }
++ }
++ else
++ {
++ numDirectBits -= kNumAlignBits;
++ do
++ {
++ NORMALIZE
++ range >>= 1;
++
++ {
++ UInt32 t;
++ code -= range;
++ t = (0 - ((UInt32)code >> 31)); /* (UInt32)((Int32)code >> 31) */
++ distance = (distance << 1) + (t + 1);
++ code += range & t;
++ }
++ /*
++ distance <<= 1;
++ if (code >= range)
++ {
++ code -= range;
++ distance |= 1;
++ }
++ */
++ }
++ while (--numDirectBits != 0);
++ prob = probs + Align;
++ distance <<= kNumAlignBits;
++ {
++ unsigned i = 1;
++ GET_BIT2(prob + i, i, ; , distance |= 1);
++ GET_BIT2(prob + i, i, ; , distance |= 2);
++ GET_BIT2(prob + i, i, ; , distance |= 4);
++ GET_BIT2(prob + i, i, ; , distance |= 8);
++ }
++ if (distance == (UInt32)0xFFFFFFFF)
++ {
++ len += kMatchSpecLenStart;
++ state -= kNumStates;
++ break;
++ }
++ }
++ }
++ rep3 = rep2;
++ rep2 = rep1;
++ rep1 = rep0;
++ rep0 = distance + 1;
++ if (checkDicSize == 0)
++ {
++ if (distance >= processedPos)
++ return SZ_ERROR_DATA;
++ }
++ else if (distance >= checkDicSize)
++ return SZ_ERROR_DATA;
++ state = (state < kNumStates + kNumLitStates) ? kNumLitStates : kNumLitStates + 3;
++ }
++
++ len += kMatchMinLen;
++
++ if (limit == dicPos)
++ return SZ_ERROR_DATA;
++ {
++ SizeT rem = limit - dicPos;
++ unsigned curLen = ((rem < len) ? (unsigned)rem : len);
++ SizeT pos = (dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0);
++
++ processedPos += curLen;
++
++ len -= curLen;
++ if (pos + curLen <= dicBufSize)
++ {
++ Byte *dest = dic + dicPos;
++ ptrdiff_t src = (ptrdiff_t)pos - (ptrdiff_t)dicPos;
++ const Byte *lim = dest + curLen;
++ dicPos += curLen;
++ do
++ *(dest) = (Byte)*(dest + src);
++ while (++dest != lim);
++ }
++ else
++ {
++ do
++ {
++ dic[dicPos++] = dic[pos];
++ if (++pos == dicBufSize)
++ pos = 0;
++ }
++ while (--curLen != 0);
++ }
++ }
++ }
++ }
++ while (dicPos < limit && buf < bufLimit);
++ NORMALIZE;
++ p->buf = buf;
++ p->range = range;
++ p->code = code;
++ p->remainLen = len;
++ p->dicPos = dicPos;
++ p->processedPos = processedPos;
++ p->reps[0] = rep0;
++ p->reps[1] = rep1;
++ p->reps[2] = rep2;
++ p->reps[3] = rep3;
++ p->state = state;
++
++ return SZ_OK;
++}
++
++static void MY_FAST_CALL LzmaDec_WriteRem(CLzmaDec *p, SizeT limit)
++{
++ if (p->remainLen != 0 && p->remainLen < kMatchSpecLenStart)
++ {
++ Byte *dic = p->dic;
++ SizeT dicPos = p->dicPos;
++ SizeT dicBufSize = p->dicBufSize;
++ unsigned len = p->remainLen;
++ UInt32 rep0 = p->reps[0];
++ if (limit - dicPos < len)
++ len = (unsigned)(limit - dicPos);
++
++ if (p->checkDicSize == 0 && p->prop.dicSize - p->processedPos <= len)
++ p->checkDicSize = p->prop.dicSize;
++
++ p->processedPos += len;
++ p->remainLen -= len;
++ while (len-- != 0)
++ {
++ dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
++ dicPos++;
++ }
++ p->dicPos = dicPos;
++ }
++}
++
++static int MY_FAST_CALL LzmaDec_DecodeReal2(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
++{
++ do
++ {
++ SizeT limit2 = limit;
++ if (p->checkDicSize == 0)
++ {
++ UInt32 rem = p->prop.dicSize - p->processedPos;
++ if (limit - p->dicPos > rem)
++ limit2 = p->dicPos + rem;
++ }
++ RINOK(LzmaDec_DecodeReal(p, limit2, bufLimit));
++ if (p->processedPos >= p->prop.dicSize)
++ p->checkDicSize = p->prop.dicSize;
++ LzmaDec_WriteRem(p, limit);
++ }
++ while (p->dicPos < limit && p->buf < bufLimit && p->remainLen < kMatchSpecLenStart);
++
++ if (p->remainLen > kMatchSpecLenStart)
++ {
++ p->remainLen = kMatchSpecLenStart;
++ }
++ return 0;
++}
++
++typedef enum
++{
++ DUMMY_ERROR, /* unexpected end of input stream */
++ DUMMY_LIT,
++ DUMMY_MATCH,
++ DUMMY_REP
++} ELzmaDummy;
++
++static ELzmaDummy LzmaDec_TryDummy(const CLzmaDec *p, const Byte *buf, SizeT inSize)
++{
++ UInt32 range = p->range;
++ UInt32 code = p->code;
++ const Byte *bufLimit = buf + inSize;
++ CLzmaProb *probs = p->probs;
++ unsigned state = p->state;
++ ELzmaDummy res;
++
++ {
++ CLzmaProb *prob;
++ UInt32 bound;
++ unsigned ttt;
++ unsigned posState = (p->processedPos) & ((1 << p->prop.pb) - 1);
++
++ prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
++ IF_BIT_0_CHECK(prob)
++ {
++ UPDATE_0_CHECK
++
++ /* if (bufLimit - buf >= 7) return DUMMY_LIT; */
++
++ prob = probs + Literal;
++ if (p->checkDicSize != 0 || p->processedPos != 0)
++ prob += (LZMA_LIT_SIZE *
++ ((((p->processedPos) & ((1 << (p->prop.lp)) - 1)) << p->prop.lc) +
++ (p->dic[(p->dicPos == 0 ? p->dicBufSize : p->dicPos) - 1] >> (8 - p->prop.lc))));
++
++ if (state < kNumLitStates)
++ {
++ unsigned symbol = 1;
++ do { GET_BIT_CHECK(prob + symbol, symbol) } while (symbol < 0x100);
++ }
++ else
++ {
++ unsigned matchByte = p->dic[p->dicPos - p->reps[0] +
++ ((p->dicPos < p->reps[0]) ? p->dicBufSize : 0)];
++ unsigned offs = 0x100;
++ unsigned symbol = 1;
++ do
++ {
++ unsigned bit;
++ CLzmaProb *probLit;
++ matchByte <<= 1;
++ bit = (matchByte & offs);
++ probLit = prob + offs + bit + symbol;
++ GET_BIT2_CHECK(probLit, symbol, offs &= ~bit, offs &= bit)
++ }
++ while (symbol < 0x100);
++ }
++ res = DUMMY_LIT;
++ }
++ else
++ {
++ unsigned len;
++ UPDATE_1_CHECK;
++
++ prob = probs + IsRep + state;
++ IF_BIT_0_CHECK(prob)
++ {
++ UPDATE_0_CHECK;
++ state = 0;
++ prob = probs + LenCoder;
++ res = DUMMY_MATCH;
++ }
++ else
++ {
++ UPDATE_1_CHECK;
++ res = DUMMY_REP;
++ prob = probs + IsRepG0 + state;
++ IF_BIT_0_CHECK(prob)
++ {
++ UPDATE_0_CHECK;
++ prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
++ IF_BIT_0_CHECK(prob)
++ {
++ UPDATE_0_CHECK;
++ NORMALIZE_CHECK;
++ return DUMMY_REP;
++ }
++ else
++ {
++ UPDATE_1_CHECK;
++ }
++ }
++ else
++ {
++ UPDATE_1_CHECK;
++ prob = probs + IsRepG1 + state;
++ IF_BIT_0_CHECK(prob)
++ {
++ UPDATE_0_CHECK;
++ }
++ else
++ {
++ UPDATE_1_CHECK;
++ prob = probs + IsRepG2 + state;
++ IF_BIT_0_CHECK(prob)
++ {
++ UPDATE_0_CHECK;
++ }
++ else
++ {
++ UPDATE_1_CHECK;
++ }
++ }
++ }
++ state = kNumStates;
++ prob = probs + RepLenCoder;
++ }
++ {
++ unsigned limit, offset;
++ CLzmaProb *probLen = prob + LenChoice;
++ IF_BIT_0_CHECK(probLen)
++ {
++ UPDATE_0_CHECK;
++ probLen = prob + LenLow + (posState << kLenNumLowBits);
++ offset = 0;
++ limit = 1 << kLenNumLowBits;
++ }
++ else
++ {
++ UPDATE_1_CHECK;
++ probLen = prob + LenChoice2;
++ IF_BIT_0_CHECK(probLen)
++ {
++ UPDATE_0_CHECK;
++ probLen = prob + LenMid + (posState << kLenNumMidBits);
++ offset = kLenNumLowSymbols;
++ limit = 1 << kLenNumMidBits;
++ }
++ else
++ {
++ UPDATE_1_CHECK;
++ probLen = prob + LenHigh;
++ offset = kLenNumLowSymbols + kLenNumMidSymbols;
++ limit = 1 << kLenNumHighBits;
++ }
++ }
++ TREE_DECODE_CHECK(probLen, limit, len);
++ len += offset;
++ }
++
++ if (state < 4)
++ {
++ unsigned posSlot;
++ prob = probs + PosSlot +
++ ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
++ kNumPosSlotBits);
++ TREE_DECODE_CHECK(prob, 1 << kNumPosSlotBits, posSlot);
++ if (posSlot >= kStartPosModelIndex)
++ {
++ int numDirectBits = ((posSlot >> 1) - 1);
++
++ /* if (bufLimit - buf >= 8) return DUMMY_MATCH; */
++
++ if (posSlot < kEndPosModelIndex)
++ {
++ prob = probs + SpecPos + ((2 | (posSlot & 1)) << numDirectBits) - posSlot - 1;
++ }
++ else
++ {
++ numDirectBits -= kNumAlignBits;
++ do
++ {
++ NORMALIZE_CHECK
++ range >>= 1;
++ code -= range & (((code - range) >> 31) - 1);
++ /* if (code >= range) code -= range; */
++ }
++ while (--numDirectBits != 0);
++ prob = probs + Align;
++ numDirectBits = kNumAlignBits;
++ }
++ {
++ unsigned i = 1;
++ do
++ {
++ GET_BIT_CHECK(prob + i, i);
++ }
++ while (--numDirectBits != 0);
++ }
++ }
++ }
++ }
++ }
++ NORMALIZE_CHECK;
++ return res;
++}
++
++
++static void LzmaDec_InitRc(CLzmaDec *p, const Byte *data)
++{
++ p->code = ((UInt32)data[1] << 24) | ((UInt32)data[2] << 16) | ((UInt32)data[3] << 8) | ((UInt32)data[4]);
++ p->range = 0xFFFFFFFF;
++ p->needFlush = 0;
++}
++
++void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
++{
++ p->needFlush = 1;
++ p->remainLen = 0;
++ p->tempBufSize = 0;
++
++ if (initDic)
++ {
++ p->processedPos = 0;
++ p->checkDicSize = 0;
++ p->needInitState = 1;
++ }
++ if (initState)
++ p->needInitState = 1;
++}
++
++void LzmaDec_Init(CLzmaDec *p)
++{
++ p->dicPos = 0;
++ LzmaDec_InitDicAndState(p, True, True);
++}
++
++static void LzmaDec_InitStateReal(CLzmaDec *p)
++{
++ UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (p->prop.lc + p->prop.lp));
++ UInt32 i;
++ CLzmaProb *probs = p->probs;
++ for (i = 0; i < numProbs; i++)
++ probs[i] = kBitModelTotal >> 1;
++ p->reps[0] = p->reps[1] = p->reps[2] = p->reps[3] = 1;
++ p->state = 0;
++ p->needInitState = 0;
++}
++
++SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
++ ELzmaFinishMode finishMode, ELzmaStatus *status)
++{
++ SizeT inSize = *srcLen;
++ (*srcLen) = 0;
++ LzmaDec_WriteRem(p, dicLimit);
++
++ *status = LZMA_STATUS_NOT_SPECIFIED;
++
++ while (p->remainLen != kMatchSpecLenStart)
++ {
++ int checkEndMarkNow;
++
++ if (p->needFlush != 0)
++ {
++ for (; inSize > 0 && p->tempBufSize < RC_INIT_SIZE; (*srcLen)++, inSize--)
++ p->tempBuf[p->tempBufSize++] = *src++;
++ if (p->tempBufSize < RC_INIT_SIZE)
++ {
++ *status = LZMA_STATUS_NEEDS_MORE_INPUT;
++ return SZ_OK;
++ }
++ if (p->tempBuf[0] != 0)
++ return SZ_ERROR_DATA;
++
++ LzmaDec_InitRc(p, p->tempBuf);
++ p->tempBufSize = 0;
++ }
++
++ checkEndMarkNow = 0;
++ if (p->dicPos >= dicLimit)
++ {
++ if (p->remainLen == 0 && p->code == 0)
++ {
++ *status = LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK;
++ return SZ_OK;
++ }
++ if (finishMode == LZMA_FINISH_ANY)
++ {
++ *status = LZMA_STATUS_NOT_FINISHED;
++ return SZ_OK;
++ }
++ if (p->remainLen != 0)
++ {
++ *status = LZMA_STATUS_NOT_FINISHED;
++ return SZ_ERROR_DATA;
++ }
++ checkEndMarkNow = 1;
++ }
++
++ if (p->needInitState)
++ LzmaDec_InitStateReal(p);
++
++ if (p->tempBufSize == 0)
++ {
++ SizeT processed;
++ const Byte *bufLimit;
++ if (inSize < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
++ {
++ int dummyRes = LzmaDec_TryDummy(p, src, inSize);
++ if (dummyRes == DUMMY_ERROR)
++ {
++ memcpy(p->tempBuf, src, inSize);
++ p->tempBufSize = (unsigned)inSize;
++ (*srcLen) += inSize;
++ *status = LZMA_STATUS_NEEDS_MORE_INPUT;
++ return SZ_OK;
++ }
++ if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
++ {
++ *status = LZMA_STATUS_NOT_FINISHED;
++ return SZ_ERROR_DATA;
++ }
++ bufLimit = src;
++ }
++ else
++ bufLimit = src + inSize - LZMA_REQUIRED_INPUT_MAX;
++ p->buf = src;
++ if (LzmaDec_DecodeReal2(p, dicLimit, bufLimit) != 0)
++ return SZ_ERROR_DATA;
++ processed = (SizeT)(p->buf - src);
++ (*srcLen) += processed;
++ src += processed;
++ inSize -= processed;
++ }
++ else
++ {
++ unsigned rem = p->tempBufSize, lookAhead = 0;
++ while (rem < LZMA_REQUIRED_INPUT_MAX && lookAhead < inSize)
++ p->tempBuf[rem++] = src[lookAhead++];
++ p->tempBufSize = rem;
++ if (rem < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
++ {
++ int dummyRes = LzmaDec_TryDummy(p, p->tempBuf, rem);
++ if (dummyRes == DUMMY_ERROR)
++ {
++ (*srcLen) += lookAhead;
++ *status = LZMA_STATUS_NEEDS_MORE_INPUT;
++ return SZ_OK;
++ }
++ if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
++ {
++ *status = LZMA_STATUS_NOT_FINISHED;
++ return SZ_ERROR_DATA;
++ }
++ }
++ p->buf = p->tempBuf;
++ if (LzmaDec_DecodeReal2(p, dicLimit, p->buf) != 0)
++ return SZ_ERROR_DATA;
++ lookAhead -= (rem - (unsigned)(p->buf - p->tempBuf));
++ (*srcLen) += lookAhead;
++ src += lookAhead;
++ inSize -= lookAhead;
++ p->tempBufSize = 0;
++ }
++ }
++ if (p->code == 0)
++ *status = LZMA_STATUS_FINISHED_WITH_MARK;
++ return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA;
++}
++
++SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status)
++{
++ SizeT outSize = *destLen;
++ SizeT inSize = *srcLen;
++ *srcLen = *destLen = 0;
++ for (;;)
++ {
++ SizeT inSizeCur = inSize, outSizeCur, dicPos;
++ ELzmaFinishMode curFinishMode;
++ SRes res;
++ if (p->dicPos == p->dicBufSize)
++ p->dicPos = 0;
++ dicPos = p->dicPos;
++ if (outSize > p->dicBufSize - dicPos)
++ {
++ outSizeCur = p->dicBufSize;
++ curFinishMode = LZMA_FINISH_ANY;
++ }
++ else
++ {
++ outSizeCur = dicPos + outSize;
++ curFinishMode = finishMode;
++ }
++
++ res = LzmaDec_DecodeToDic(p, outSizeCur, src, &inSizeCur, curFinishMode, status);
++ src += inSizeCur;
++ inSize -= inSizeCur;
++ *srcLen += inSizeCur;
++ outSizeCur = p->dicPos - dicPos;
++ memcpy(dest, p->dic + dicPos, outSizeCur);
++ dest += outSizeCur;
++ outSize -= outSizeCur;
++ *destLen += outSizeCur;
++ if (res != 0)
++ return res;
++ if (outSizeCur == 0 || outSize == 0)
++ return SZ_OK;
++ }
++}
++
++void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
++{
++ alloc->Free(alloc, p->probs);
++ p->probs = 0;
++}
++
++static void LzmaDec_FreeDict(CLzmaDec *p, ISzAlloc *alloc)
++{
++ alloc->Free(alloc, p->dic);
++ p->dic = 0;
++}
++
++void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc)
++{
++ LzmaDec_FreeProbs(p, alloc);
++ LzmaDec_FreeDict(p, alloc);
++}
++
++SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
++{
++ UInt32 dicSize;
++ Byte d;
++
++ if (size < LZMA_PROPS_SIZE)
++ return SZ_ERROR_UNSUPPORTED;
++ else
++ dicSize = data[1] | ((UInt32)data[2] << 8) | ((UInt32)data[3] << 16) | ((UInt32)data[4] << 24);
++
++ if (dicSize < LZMA_DIC_MIN)
++ dicSize = LZMA_DIC_MIN;
++ p->dicSize = dicSize;
++
++ d = data[0];
++ if (d >= (9 * 5 * 5))
++ return SZ_ERROR_UNSUPPORTED;
++
++ p->lc = d % 9;
++ d /= 9;
++ p->pb = d / 5;
++ p->lp = d % 5;
++
++ return SZ_OK;
++}
++
++static SRes LzmaDec_AllocateProbs2(CLzmaDec *p, const CLzmaProps *propNew, ISzAlloc *alloc)
++{
++ UInt32 numProbs = LzmaProps_GetNumProbs(propNew);
++ if (p->probs == 0 || numProbs != p->numProbs)
++ {
++ LzmaDec_FreeProbs(p, alloc);
++ p->probs = (CLzmaProb *)alloc->Alloc(alloc, numProbs * sizeof(CLzmaProb));
++ p->numProbs = numProbs;
++ if (p->probs == 0)
++ return SZ_ERROR_MEM;
++ }
++ return SZ_OK;
++}
++
++SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
++{
++ CLzmaProps propNew;
++ RINOK(LzmaProps_Decode(&propNew, props, propsSize));
++ RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
++ p->prop = propNew;
++ return SZ_OK;
++}
++
++SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
++{
++ CLzmaProps propNew;
++ SizeT dicBufSize;
++ RINOK(LzmaProps_Decode(&propNew, props, propsSize));
++ RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
++ dicBufSize = propNew.dicSize;
++ if (p->dic == 0 || dicBufSize != p->dicBufSize)
++ {
++ LzmaDec_FreeDict(p, alloc);
++ p->dic = (Byte *)alloc->Alloc(alloc, dicBufSize);
++ if (p->dic == 0)
++ {
++ LzmaDec_FreeProbs(p, alloc);
++ return SZ_ERROR_MEM;
++ }
++ }
++ p->dicBufSize = dicBufSize;
++ p->prop = propNew;
++ return SZ_OK;
++}
++
++SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
++ const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
++ ELzmaStatus *status, ISzAlloc *alloc)
++{
++ CLzmaDec p;
++ SRes res;
++ SizeT inSize = *srcLen;
++ SizeT outSize = *destLen;
++ *srcLen = *destLen = 0;
++ if (inSize < RC_INIT_SIZE)
++ return SZ_ERROR_INPUT_EOF;
++
++ LzmaDec_Construct(&p);
++ res = LzmaDec_AllocateProbs(&p, propData, propSize, alloc);
++ if (res != 0)
++ return res;
++ p.dic = dest;
++ p.dicBufSize = outSize;
++
++ LzmaDec_Init(&p);
++
++ *srcLen = inSize;
++ res = LzmaDec_DecodeToDic(&p, outSize, src, srcLen, finishMode, status);
++
++ if (res == SZ_OK && *status == LZMA_STATUS_NEEDS_MORE_INPUT)
++ res = SZ_ERROR_INPUT_EOF;
++
++ (*destLen) = p.dicPos;
++ LzmaDec_FreeProbs(&p, alloc);
++ return res;
++}
+--- /dev/null
++++ b/lib/lzma/LzmaEnc.c
+@@ -0,0 +1,2271 @@
++/* LzmaEnc.c -- LZMA Encoder
++2009-11-24 : Igor Pavlov : Public domain */
++
++#include <string.h>
++
++/* #define SHOW_STAT */
++/* #define SHOW_STAT2 */
++
++#if defined(SHOW_STAT) || defined(SHOW_STAT2)
++#include <stdio.h>
++#endif
++
++#include "LzmaEnc.h"
++
++/* disable MT */
++#define _7ZIP_ST
++
++#include "LzFind.h"
++#ifndef _7ZIP_ST
++#include "LzFindMt.h"
++#endif
++
++#ifdef SHOW_STAT
++static int ttt = 0;
++#endif
++
++#define kBlockSizeMax ((1 << LZMA_NUM_BLOCK_SIZE_BITS) - 1)
++
++#define kBlockSize (9 << 10)
++#define kUnpackBlockSize (1 << 18)
++#define kMatchArraySize (1 << 21)
++#define kMatchRecordMaxSize ((LZMA_MATCH_LEN_MAX * 2 + 3) * LZMA_MATCH_LEN_MAX)
++
++#define kNumMaxDirectBits (31)
++
++#define kNumTopBits 24
++#define kTopValue ((UInt32)1 << kNumTopBits)
++
++#define kNumBitModelTotalBits 11
++#define kBitModelTotal (1 << kNumBitModelTotalBits)
++#define kNumMoveBits 5
++#define kProbInitValue (kBitModelTotal >> 1)
++
++#define kNumMoveReducingBits 4
++#define kNumBitPriceShiftBits 4
++#define kBitPrice (1 << kNumBitPriceShiftBits)
++
++void LzmaEncProps_Init(CLzmaEncProps *p)
++{
++ p->level = 5;
++ p->dictSize = p->mc = 0;
++ p->lc = p->lp = p->pb = p->algo = p->fb = p->btMode = p->numHashBytes = p->numThreads = -1;
++ p->writeEndMark = 0;
++}
++
++void LzmaEncProps_Normalize(CLzmaEncProps *p)
++{
++ int level = p->level;
++ if (level < 0) level = 5;
++ p->level = level;
++ if (p->dictSize == 0) p->dictSize = (level <= 5 ? (1 << (level * 2 + 14)) : (level == 6 ? (1 << 25) : (1 << 26)));
++ if (p->lc < 0) p->lc = 3;
++ if (p->lp < 0) p->lp = 0;
++ if (p->pb < 0) p->pb = 2;
++ if (p->algo < 0) p->algo = (level < 5 ? 0 : 1);
++ if (p->fb < 0) p->fb = (level < 7 ? 32 : 64);
++ if (p->btMode < 0) p->btMode = (p->algo == 0 ? 0 : 1);
++ if (p->numHashBytes < 0) p->numHashBytes = 4;
++ if (p->mc == 0) p->mc = (16 + (p->fb >> 1)) >> (p->btMode ? 0 : 1);
++ if (p->numThreads < 0)
++ p->numThreads =
++ #ifndef _7ZIP_ST
++ ((p->btMode && p->algo) ? 2 : 1);
++ #else
++ 1;
++ #endif
++}
++
++UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
++{
++ CLzmaEncProps props = *props2;
++ LzmaEncProps_Normalize(&props);
++ return props.dictSize;
++}
++
++/* #define LZMA_LOG_BSR */
++/* Define it for Intel's CPU */
++
++
++#ifdef LZMA_LOG_BSR
++
++#define kDicLogSizeMaxCompress 30
++
++#define BSR2_RET(pos, res) { unsigned long i; _BitScanReverse(&i, (pos)); res = (i + i) + ((pos >> (i - 1)) & 1); }
++
++UInt32 GetPosSlot1(UInt32 pos)
++{
++ UInt32 res;
++ BSR2_RET(pos, res);
++ return res;
++}
++#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); }
++#define GetPosSlot(pos, res) { if (pos < 2) res = pos; else BSR2_RET(pos, res); }
++
++#else
++
++#define kNumLogBits (9 + (int)sizeof(size_t) / 2)
++#define kDicLogSizeMaxCompress ((kNumLogBits - 1) * 2 + 7)
++
++void LzmaEnc_FastPosInit(Byte *g_FastPos)
++{
++ int c = 2, slotFast;
++ g_FastPos[0] = 0;
++ g_FastPos[1] = 1;
++
++ for (slotFast = 2; slotFast < kNumLogBits * 2; slotFast++)
++ {
++ UInt32 k = (1 << ((slotFast >> 1) - 1));
++ UInt32 j;
++ for (j = 0; j < k; j++, c++)
++ g_FastPos[c] = (Byte)slotFast;
++ }
++}
++
++#define BSR2_RET(pos, res) { UInt32 i = 6 + ((kNumLogBits - 1) & \
++ (0 - (((((UInt32)1 << (kNumLogBits + 6)) - 1) - pos) >> 31))); \
++ res = p->g_FastPos[pos >> i] + (i * 2); }
++/*
++#define BSR2_RET(pos, res) { res = (pos < (1 << (kNumLogBits + 6))) ? \
++ p->g_FastPos[pos >> 6] + 12 : \
++ p->g_FastPos[pos >> (6 + kNumLogBits - 1)] + (6 + (kNumLogBits - 1)) * 2; }
++*/
++
++#define GetPosSlot1(pos) p->g_FastPos[pos]
++#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); }
++#define GetPosSlot(pos, res) { if (pos < kNumFullDistances) res = p->g_FastPos[pos]; else BSR2_RET(pos, res); }
++
++#endif
++
++
++#define LZMA_NUM_REPS 4
++
++typedef unsigned CState;
++
++typedef struct
++{
++ UInt32 price;
++
++ CState state;
++ int prev1IsChar;
++ int prev2;
++
++ UInt32 posPrev2;
++ UInt32 backPrev2;
++
++ UInt32 posPrev;
++ UInt32 backPrev;
++ UInt32 backs[LZMA_NUM_REPS];
++} COptimal;
++
++#define kNumOpts (1 << 12)
++
++#define kNumLenToPosStates 4
++#define kNumPosSlotBits 6
++#define kDicLogSizeMin 0
++#define kDicLogSizeMax 32
++#define kDistTableSizeMax (kDicLogSizeMax * 2)
++
++
++#define kNumAlignBits 4
++#define kAlignTableSize (1 << kNumAlignBits)
++#define kAlignMask (kAlignTableSize - 1)
++
++#define kStartPosModelIndex 4
++#define kEndPosModelIndex 14
++#define kNumPosModels (kEndPosModelIndex - kStartPosModelIndex)
++
++#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
++
++#ifdef _LZMA_PROB32
++#define CLzmaProb UInt32
++#else
++#define CLzmaProb UInt16
++#endif
++
++#define LZMA_PB_MAX 4
++#define LZMA_LC_MAX 8
++#define LZMA_LP_MAX 4
++
++#define LZMA_NUM_PB_STATES_MAX (1 << LZMA_PB_MAX)
++
++
++#define kLenNumLowBits 3
++#define kLenNumLowSymbols (1 << kLenNumLowBits)
++#define kLenNumMidBits 3
++#define kLenNumMidSymbols (1 << kLenNumMidBits)
++#define kLenNumHighBits 8
++#define kLenNumHighSymbols (1 << kLenNumHighBits)
++
++#define kLenNumSymbolsTotal (kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
++
++#define LZMA_MATCH_LEN_MIN 2
++#define LZMA_MATCH_LEN_MAX (LZMA_MATCH_LEN_MIN + kLenNumSymbolsTotal - 1)
++
++#define kNumStates 12
++
++typedef struct
++{
++ CLzmaProb choice;
++ CLzmaProb choice2;
++ CLzmaProb low[LZMA_NUM_PB_STATES_MAX << kLenNumLowBits];
++ CLzmaProb mid[LZMA_NUM_PB_STATES_MAX << kLenNumMidBits];
++ CLzmaProb high[kLenNumHighSymbols];
++} CLenEnc;
++
++typedef struct
++{
++ CLenEnc p;
++ UInt32 prices[LZMA_NUM_PB_STATES_MAX][kLenNumSymbolsTotal];
++ UInt32 tableSize;
++ UInt32 counters[LZMA_NUM_PB_STATES_MAX];
++} CLenPriceEnc;
++
++typedef struct
++{
++ UInt32 range;
++ Byte cache;
++ UInt64 low;
++ UInt64 cacheSize;
++ Byte *buf;
++ Byte *bufLim;
++ Byte *bufBase;
++ ISeqOutStream *outStream;
++ UInt64 processed;
++ SRes res;
++} CRangeEnc;
++
++typedef struct
++{
++ CLzmaProb *litProbs;
++
++ CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX];
++ CLzmaProb isRep[kNumStates];
++ CLzmaProb isRepG0[kNumStates];
++ CLzmaProb isRepG1[kNumStates];
++ CLzmaProb isRepG2[kNumStates];
++ CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX];
++
++ CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits];
++ CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex];
++ CLzmaProb posAlignEncoder[1 << kNumAlignBits];
++
++ CLenPriceEnc lenEnc;
++ CLenPriceEnc repLenEnc;
++
++ UInt32 reps[LZMA_NUM_REPS];
++ UInt32 state;
++} CSaveState;
++
++typedef struct
++{
++ IMatchFinder matchFinder;
++ void *matchFinderObj;
++
++ #ifndef _7ZIP_ST
++ Bool mtMode;
++ CMatchFinderMt matchFinderMt;
++ #endif
++
++ CMatchFinder matchFinderBase;
++
++ #ifndef _7ZIP_ST
++ Byte pad[128];
++ #endif
++
++ UInt32 optimumEndIndex;
++ UInt32 optimumCurrentIndex;
++
++ UInt32 longestMatchLength;
++ UInt32 numPairs;
++ UInt32 numAvail;
++ COptimal opt[kNumOpts];
++
++ #ifndef LZMA_LOG_BSR
++ Byte g_FastPos[1 << kNumLogBits];
++ #endif
++
++ UInt32 ProbPrices[kBitModelTotal >> kNumMoveReducingBits];
++ UInt32 matches[LZMA_MATCH_LEN_MAX * 2 + 2 + 1];
++ UInt32 numFastBytes;
++ UInt32 additionalOffset;
++ UInt32 reps[LZMA_NUM_REPS];
++ UInt32 state;
++
++ UInt32 posSlotPrices[kNumLenToPosStates][kDistTableSizeMax];
++ UInt32 distancesPrices[kNumLenToPosStates][kNumFullDistances];
++ UInt32 alignPrices[kAlignTableSize];
++ UInt32 alignPriceCount;
++
++ UInt32 distTableSize;
++
++ unsigned lc, lp, pb;
++ unsigned lpMask, pbMask;
++
++ CLzmaProb *litProbs;
++
++ CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX];
++ CLzmaProb isRep[kNumStates];
++ CLzmaProb isRepG0[kNumStates];
++ CLzmaProb isRepG1[kNumStates];
++ CLzmaProb isRepG2[kNumStates];
++ CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX];
++
++ CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits];
++ CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex];
++ CLzmaProb posAlignEncoder[1 << kNumAlignBits];
++
++ CLenPriceEnc lenEnc;
++ CLenPriceEnc repLenEnc;
++
++ unsigned lclp;
++
++ Bool fastMode;
++
++ CRangeEnc rc;
++
++ Bool writeEndMark;
++ UInt64 nowPos64;
++ UInt32 matchPriceCount;
++ Bool finished;
++ Bool multiThread;
++
++ SRes result;
++ UInt32 dictSize;
++ UInt32 matchFinderCycles;
++
++ int needInit;
++
++ CSaveState saveState;
++} CLzmaEnc;
++
++void LzmaEnc_SaveState(CLzmaEncHandle pp)
++{
++ CLzmaEnc *p = (CLzmaEnc *)pp;
++ CSaveState *dest = &p->saveState;
++ int i;
++ dest->lenEnc = p->lenEnc;
++ dest->repLenEnc = p->repLenEnc;
++ dest->state = p->state;
++
++ for (i = 0; i < kNumStates; i++)
++ {
++ memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
++ memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
++ }
++ for (i = 0; i < kNumLenToPosStates; i++)
++ memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
++ memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
++ memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
++ memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
++ memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
++ memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
++ memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
++ memcpy(dest->reps, p->reps, sizeof(p->reps));
++ memcpy(dest->litProbs, p->litProbs, (0x300 << p->lclp) * sizeof(CLzmaProb));
++}
++
++void LzmaEnc_RestoreState(CLzmaEncHandle pp)
++{
++ CLzmaEnc *dest = (CLzmaEnc *)pp;
++ const CSaveState *p = &dest->saveState;
++ int i;
++ dest->lenEnc = p->lenEnc;
++ dest->repLenEnc = p->repLenEnc;
++ dest->state = p->state;
++
++ for (i = 0; i < kNumStates; i++)
++ {
++ memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
++ memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
++ }
++ for (i = 0; i < kNumLenToPosStates; i++)
++ memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
++ memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
++ memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
++ memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
++ memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
++ memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
++ memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
++ memcpy(dest->reps, p->reps, sizeof(p->reps));
++ memcpy(dest->litProbs, p->litProbs, (0x300 << dest->lclp) * sizeof(CLzmaProb));
++}
++
++SRes LzmaEnc_SetProps(CLzmaEncHandle pp, const CLzmaEncProps *props2)
++{
++ CLzmaEnc *p = (CLzmaEnc *)pp;
++ CLzmaEncProps props = *props2;
++ LzmaEncProps_Normalize(&props);
++
++ if (props.lc > LZMA_LC_MAX || props.lp > LZMA_LP_MAX || props.pb > LZMA_PB_MAX ||
++ props.dictSize > (1 << kDicLogSizeMaxCompress) || props.dictSize > (1 << 30))
++ return SZ_ERROR_PARAM;
++ p->dictSize = props.dictSize;
++ p->matchFinderCycles = props.mc;
++ {
++ unsigned fb = props.fb;
++ if (fb < 5)
++ fb = 5;
++ if (fb > LZMA_MATCH_LEN_MAX)
++ fb = LZMA_MATCH_LEN_MAX;
++ p->numFastBytes = fb;
++ }
++ p->lc = props.lc;
++ p->lp = props.lp;
++ p->pb = props.pb;
++ p->fastMode = (props.algo == 0);
++ p->matchFinderBase.btMode = props.btMode;
++ {
++ UInt32 numHashBytes = 4;
++ if (props.btMode)
++ {
++ if (props.numHashBytes < 2)
++ numHashBytes = 2;
++ else if (props.numHashBytes < 4)
++ numHashBytes = props.numHashBytes;
++ }
++ p->matchFinderBase.numHashBytes = numHashBytes;
++ }
++
++ p->matchFinderBase.cutValue = props.mc;
++
++ p->writeEndMark = props.writeEndMark;
++
++ #ifndef _7ZIP_ST
++ /*
++ if (newMultiThread != _multiThread)
++ {
++ ReleaseMatchFinder();
++ _multiThread = newMultiThread;
++ }
++ */
++ p->multiThread = (props.numThreads > 1);
++ #endif
++
++ return SZ_OK;
++}
++
++static const int kLiteralNextStates[kNumStates] = {0, 0, 0, 0, 1, 2, 3, 4, 5, 6, 4, 5};
++static const int kMatchNextStates[kNumStates] = {7, 7, 7, 7, 7, 7, 7, 10, 10, 10, 10, 10};
++static const int kRepNextStates[kNumStates] = {8, 8, 8, 8, 8, 8, 8, 11, 11, 11, 11, 11};
++static const int kShortRepNextStates[kNumStates]= {9, 9, 9, 9, 9, 9, 9, 11, 11, 11, 11, 11};
++
++#define IsCharState(s) ((s) < 7)
++
++#define GetLenToPosState(len) (((len) < kNumLenToPosStates + 1) ? (len) - 2 : kNumLenToPosStates - 1)
++
++#define kInfinityPrice (1 << 30)
++
++static void RangeEnc_Construct(CRangeEnc *p)
++{
++ p->outStream = 0;
++ p->bufBase = 0;
++}
++
++#define RangeEnc_GetProcessed(p) ((p)->processed + ((p)->buf - (p)->bufBase) + (p)->cacheSize)
++
++#define RC_BUF_SIZE (1 << 16)
++static int RangeEnc_Alloc(CRangeEnc *p, ISzAlloc *alloc)
++{
++ if (p->bufBase == 0)
++ {
++ p->bufBase = (Byte *)alloc->Alloc(alloc, RC_BUF_SIZE);
++ if (p->bufBase == 0)
++ return 0;
++ p->bufLim = p->bufBase + RC_BUF_SIZE;
++ }
++ return 1;
++}
++
++static void RangeEnc_Free(CRangeEnc *p, ISzAlloc *alloc)
++{
++ alloc->Free(alloc, p->bufBase);
++ p->bufBase = 0;
++}
++
++static void RangeEnc_Init(CRangeEnc *p)
++{
++ /* Stream.Init(); */
++ p->low = 0;
++ p->range = 0xFFFFFFFF;
++ p->cacheSize = 1;
++ p->cache = 0;
++
++ p->buf = p->bufBase;
++
++ p->processed = 0;
++ p->res = SZ_OK;
++}
++
++static void RangeEnc_FlushStream(CRangeEnc *p)
++{
++ size_t num;
++ if (p->res != SZ_OK)
++ return;
++ num = p->buf - p->bufBase;
++ if (num != p->outStream->Write(p->outStream, p->bufBase, num))
++ p->res = SZ_ERROR_WRITE;
++ p->processed += num;
++ p->buf = p->bufBase;
++}
++
++static void MY_FAST_CALL RangeEnc_ShiftLow(CRangeEnc *p)
++{
++ if ((UInt32)p->low < (UInt32)0xFF000000 || (int)(p->low >> 32) != 0)
++ {
++ Byte temp = p->cache;
++ do
++ {
++ Byte *buf = p->buf;
++ *buf++ = (Byte)(temp + (Byte)(p->low >> 32));
++ p->buf = buf;
++ if (buf == p->bufLim)
++ RangeEnc_FlushStream(p);
++ temp = 0xFF;
++ }
++ while (--p->cacheSize != 0);
++ p->cache = (Byte)((UInt32)p->low >> 24);
++ }
++ p->cacheSize++;
++ p->low = (UInt32)p->low << 8;
++}
++
++static void RangeEnc_FlushData(CRangeEnc *p)
++{
++ int i;
++ for (i = 0; i < 5; i++)
++ RangeEnc_ShiftLow(p);
++}
++
++static void RangeEnc_EncodeDirectBits(CRangeEnc *p, UInt32 value, int numBits)
++{
++ do
++ {
++ p->range >>= 1;
++ p->low += p->range & (0 - ((value >> --numBits) & 1));
++ if (p->range < kTopValue)
++ {
++ p->range <<= 8;
++ RangeEnc_ShiftLow(p);
++ }
++ }
++ while (numBits != 0);
++}
++
++static void RangeEnc_EncodeBit(CRangeEnc *p, CLzmaProb *prob, UInt32 symbol)
++{
++ UInt32 ttt = *prob;
++ UInt32 newBound = (p->range >> kNumBitModelTotalBits) * ttt;
++ if (symbol == 0)
++ {
++ p->range = newBound;
++ ttt += (kBitModelTotal - ttt) >> kNumMoveBits;
++ }
++ else
++ {
++ p->low += newBound;
++ p->range -= newBound;
++ ttt -= ttt >> kNumMoveBits;
++ }
++ *prob = (CLzmaProb)ttt;
++ if (p->range < kTopValue)
++ {
++ p->range <<= 8;
++ RangeEnc_ShiftLow(p);
++ }
++}
++
++static void LitEnc_Encode(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol)
++{
++ symbol |= 0x100;
++ do
++ {
++ RangeEnc_EncodeBit(p, probs + (symbol >> 8), (symbol >> 7) & 1);
++ symbol <<= 1;
++ }
++ while (symbol < 0x10000);
++}
++
++static void LitEnc_EncodeMatched(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol, UInt32 matchByte)
++{
++ UInt32 offs = 0x100;
++ symbol |= 0x100;
++ do
++ {
++ matchByte <<= 1;
++ RangeEnc_EncodeBit(p, probs + (offs + (matchByte & offs) + (symbol >> 8)), (symbol >> 7) & 1);
++ symbol <<= 1;
++ offs &= ~(matchByte ^ symbol);
++ }
++ while (symbol < 0x10000);
++}
++
++void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
++{
++ UInt32 i;
++ for (i = (1 << kNumMoveReducingBits) / 2; i < kBitModelTotal; i += (1 << kNumMoveReducingBits))
++ {
++ const int kCyclesBits = kNumBitPriceShiftBits;
++ UInt32 w = i;
++ UInt32 bitCount = 0;
++ int j;
++ for (j = 0; j < kCyclesBits; j++)
++ {
++ w = w * w;
++ bitCount <<= 1;
++ while (w >= ((UInt32)1 << 16))
++ {
++ w >>= 1;
++ bitCount++;
++ }
++ }
++ ProbPrices[i >> kNumMoveReducingBits] = ((kNumBitModelTotalBits << kCyclesBits) - 15 - bitCount);
++ }
++}
++
++
++#define GET_PRICE(prob, symbol) \
++ p->ProbPrices[((prob) ^ (((-(int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits];
++
++#define GET_PRICEa(prob, symbol) \
++ ProbPrices[((prob) ^ ((-((int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits];
++
++#define GET_PRICE_0(prob) p->ProbPrices[(prob) >> kNumMoveReducingBits]
++#define GET_PRICE_1(prob) p->ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits]
++
++#define GET_PRICE_0a(prob) ProbPrices[(prob) >> kNumMoveReducingBits]
++#define GET_PRICE_1a(prob) ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits]
++
++static UInt32 LitEnc_GetPrice(const CLzmaProb *probs, UInt32 symbol, UInt32 *ProbPrices)
++{
++ UInt32 price = 0;
++ symbol |= 0x100;
++ do
++ {
++ price += GET_PRICEa(probs[symbol >> 8], (symbol >> 7) & 1);
++ symbol <<= 1;
++ }
++ while (symbol < 0x10000);
++ return price;
++}
++
++static UInt32 LitEnc_GetPriceMatched(const CLzmaProb *probs, UInt32 symbol, UInt32 matchByte, UInt32 *ProbPrices)
++{
++ UInt32 price = 0;
++ UInt32 offs = 0x100;
++ symbol |= 0x100;
++ do
++ {
++ matchByte <<= 1;
++ price += GET_PRICEa(probs[offs + (matchByte & offs) + (symbol >> 8)], (symbol >> 7) & 1);
++ symbol <<= 1;
++ offs &= ~(matchByte ^ symbol);
++ }
++ while (symbol < 0x10000);
++ return price;
++}
++
++
++static void RcTree_Encode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol)
++{
++ UInt32 m = 1;
++ int i;
++ for (i = numBitLevels; i != 0;)
++ {
++ UInt32 bit;
++ i--;
++ bit = (symbol >> i) & 1;
++ RangeEnc_EncodeBit(rc, probs + m, bit);
++ m = (m << 1) | bit;
++ }
++}
++
++static void RcTree_ReverseEncode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol)
++{
++ UInt32 m = 1;
++ int i;
++ for (i = 0; i < numBitLevels; i++)
++ {
++ UInt32 bit = symbol & 1;
++ RangeEnc_EncodeBit(rc, probs + m, bit);
++ m = (m << 1) | bit;
++ symbol >>= 1;
++ }
++}
++
++static UInt32 RcTree_GetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices)
++{
++ UInt32 price = 0;
++ symbol |= (1 << numBitLevels);
++ while (symbol != 1)
++ {
++ price += GET_PRICEa(probs[symbol >> 1], symbol & 1);
++ symbol >>= 1;
++ }
++ return price;
++}
++
++static UInt32 RcTree_ReverseGetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices)
++{
++ UInt32 price = 0;
++ UInt32 m = 1;
++ int i;
++ for (i = numBitLevels; i != 0; i--)
++ {
++ UInt32 bit = symbol & 1;
++ symbol >>= 1;
++ price += GET_PRICEa(probs[m], bit);
++ m = (m << 1) | bit;
++ }
++ return price;
++}
++
++
++static void LenEnc_Init(CLenEnc *p)
++{
++ unsigned i;
++ p->choice = p->choice2 = kProbInitValue;
++ for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumLowBits); i++)
++ p->low[i] = kProbInitValue;
++ for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumMidBits); i++)
++ p->mid[i] = kProbInitValue;
++ for (i = 0; i < kLenNumHighSymbols; i++)
++ p->high[i] = kProbInitValue;
++}
++
++static void LenEnc_Encode(CLenEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState)
++{
++ if (symbol < kLenNumLowSymbols)
++ {
++ RangeEnc_EncodeBit(rc, &p->choice, 0);
++ RcTree_Encode(rc, p->low + (posState << kLenNumLowBits), kLenNumLowBits, symbol);
++ }
++ else
++ {
++ RangeEnc_EncodeBit(rc, &p->choice, 1);
++ if (symbol < kLenNumLowSymbols + kLenNumMidSymbols)
++ {
++ RangeEnc_EncodeBit(rc, &p->choice2, 0);
++ RcTree_Encode(rc, p->mid + (posState << kLenNumMidBits), kLenNumMidBits, symbol - kLenNumLowSymbols);
++ }
++ else
++ {
++ RangeEnc_EncodeBit(rc, &p->choice2, 1);
++ RcTree_Encode(rc, p->high, kLenNumHighBits, symbol - kLenNumLowSymbols - kLenNumMidSymbols);
++ }
++ }
++}
++
++static void LenEnc_SetPrices(CLenEnc *p, UInt32 posState, UInt32 numSymbols, UInt32 *prices, UInt32 *ProbPrices)
++{
++ UInt32 a0 = GET_PRICE_0a(p->choice);
++ UInt32 a1 = GET_PRICE_1a(p->choice);
++ UInt32 b0 = a1 + GET_PRICE_0a(p->choice2);
++ UInt32 b1 = a1 + GET_PRICE_1a(p->choice2);
++ UInt32 i = 0;
++ for (i = 0; i < kLenNumLowSymbols; i++)
++ {
++ if (i >= numSymbols)
++ return;
++ prices[i] = a0 + RcTree_GetPrice(p->low + (posState << kLenNumLowBits), kLenNumLowBits, i, ProbPrices);
++ }
++ for (; i < kLenNumLowSymbols + kLenNumMidSymbols; i++)
++ {
++ if (i >= numSymbols)
++ return;
++ prices[i] = b0 + RcTree_GetPrice(p->mid + (posState << kLenNumMidBits), kLenNumMidBits, i - kLenNumLowSymbols, ProbPrices);
++ }
++ for (; i < numSymbols; i++)
++ prices[i] = b1 + RcTree_GetPrice(p->high, kLenNumHighBits, i - kLenNumLowSymbols - kLenNumMidSymbols, ProbPrices);
++}
++
++static void MY_FAST_CALL LenPriceEnc_UpdateTable(CLenPriceEnc *p, UInt32 posState, UInt32 *ProbPrices)
++{
++ LenEnc_SetPrices(&p->p, posState, p->tableSize, p->prices[posState], ProbPrices);
++ p->counters[posState] = p->tableSize;
++}
++
++static void LenPriceEnc_UpdateTables(CLenPriceEnc *p, UInt32 numPosStates, UInt32 *ProbPrices)
++{
++ UInt32 posState;
++ for (posState = 0; posState < numPosStates; posState++)
++ LenPriceEnc_UpdateTable(p, posState, ProbPrices);
++}
++
++static void LenEnc_Encode2(CLenPriceEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState, Bool updatePrice, UInt32 *ProbPrices)
++{
++ LenEnc_Encode(&p->p, rc, symbol, posState);
++ if (updatePrice)
++ if (--p->counters[posState] == 0)
++ LenPriceEnc_UpdateTable(p, posState, ProbPrices);
++}
++
++
++
++
++static void MovePos(CLzmaEnc *p, UInt32 num)
++{
++ #ifdef SHOW_STAT
++ ttt += num;
++ printf("\n MovePos %d", num);
++ #endif
++ if (num != 0)
++ {
++ p->additionalOffset += num;
++ p->matchFinder.Skip(p->matchFinderObj, num);
++ }
++}
++
++static UInt32 ReadMatchDistances(CLzmaEnc *p, UInt32 *numDistancePairsRes)
++{
++ UInt32 lenRes = 0, numPairs;
++ p->numAvail = p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
++ numPairs = p->matchFinder.GetMatches(p->matchFinderObj, p->matches);
++ #ifdef SHOW_STAT
++ printf("\n i = %d numPairs = %d ", ttt, numPairs / 2);
++ ttt++;
++ {
++ UInt32 i;
++ for (i = 0; i < numPairs; i += 2)
++ printf("%2d %6d | ", p->matches[i], p->matches[i + 1]);
++ }
++ #endif
++ if (numPairs > 0)
++ {
++ lenRes = p->matches[numPairs - 2];
++ if (lenRes == p->numFastBytes)
++ {
++ const Byte *pby = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
++ UInt32 distance = p->matches[numPairs - 1] + 1;
++ UInt32 numAvail = p->numAvail;
++ if (numAvail > LZMA_MATCH_LEN_MAX)
++ numAvail = LZMA_MATCH_LEN_MAX;
++ {
++ const Byte *pby2 = pby - distance;
++ for (; lenRes < numAvail && pby[lenRes] == pby2[lenRes]; lenRes++);
++ }
++ }
++ }
++ p->additionalOffset++;
++ *numDistancePairsRes = numPairs;
++ return lenRes;
++}
++
++
++#define MakeAsChar(p) (p)->backPrev = (UInt32)(-1); (p)->prev1IsChar = False;
++#define MakeAsShortRep(p) (p)->backPrev = 0; (p)->prev1IsChar = False;
++#define IsShortRep(p) ((p)->backPrev == 0)
++
++static UInt32 GetRepLen1Price(CLzmaEnc *p, UInt32 state, UInt32 posState)
++{
++ return
++ GET_PRICE_0(p->isRepG0[state]) +
++ GET_PRICE_0(p->isRep0Long[state][posState]);
++}
++
++static UInt32 GetPureRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 state, UInt32 posState)
++{
++ UInt32 price;
++ if (repIndex == 0)
++ {
++ price = GET_PRICE_0(p->isRepG0[state]);
++ price += GET_PRICE_1(p->isRep0Long[state][posState]);
++ }
++ else
++ {
++ price = GET_PRICE_1(p->isRepG0[state]);
++ if (repIndex == 1)
++ price += GET_PRICE_0(p->isRepG1[state]);
++ else
++ {
++ price += GET_PRICE_1(p->isRepG1[state]);
++ price += GET_PRICE(p->isRepG2[state], repIndex - 2);
++ }
++ }
++ return price;
++}
++
++static UInt32 GetRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 len, UInt32 state, UInt32 posState)
++{
++ return p->repLenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN] +
++ GetPureRepPrice(p, repIndex, state, posState);
++}
++
++static UInt32 Backward(CLzmaEnc *p, UInt32 *backRes, UInt32 cur)
++{
++ UInt32 posMem = p->opt[cur].posPrev;
++ UInt32 backMem = p->opt[cur].backPrev;
++ p->optimumEndIndex = cur;
++ do
++ {
++ if (p->opt[cur].prev1IsChar)
++ {
++ MakeAsChar(&p->opt[posMem])
++ p->opt[posMem].posPrev = posMem - 1;
++ if (p->opt[cur].prev2)
++ {
++ p->opt[posMem - 1].prev1IsChar = False;
++ p->opt[posMem - 1].posPrev = p->opt[cur].posPrev2;
++ p->opt[posMem - 1].backPrev = p->opt[cur].backPrev2;
++ }
++ }
++ {
++ UInt32 posPrev = posMem;
++ UInt32 backCur = backMem;
++
++ backMem = p->opt[posPrev].backPrev;
++ posMem = p->opt[posPrev].posPrev;
++
++ p->opt[posPrev].backPrev = backCur;
++ p->opt[posPrev].posPrev = cur;
++ cur = posPrev;
++ }
++ }
++ while (cur != 0);
++ *backRes = p->opt[0].backPrev;
++ p->optimumCurrentIndex = p->opt[0].posPrev;
++ return p->optimumCurrentIndex;
++}
++
++#define LIT_PROBS(pos, prevByte) (p->litProbs + ((((pos) & p->lpMask) << p->lc) + ((prevByte) >> (8 - p->lc))) * 0x300)
++
++static UInt32 GetOptimum(CLzmaEnc *p, UInt32 position, UInt32 *backRes)
++{
++ UInt32 numAvail, mainLen, numPairs, repMaxIndex, i, posState, lenEnd, len, cur;
++ UInt32 matchPrice, repMatchPrice, normalMatchPrice;
++ UInt32 reps[LZMA_NUM_REPS], repLens[LZMA_NUM_REPS];
++ UInt32 *matches;
++ const Byte *data;
++ Byte curByte, matchByte;
++ if (p->optimumEndIndex != p->optimumCurrentIndex)
++ {
++ const COptimal *opt = &p->opt[p->optimumCurrentIndex];
++ UInt32 lenRes = opt->posPrev - p->optimumCurrentIndex;
++ *backRes = opt->backPrev;
++ p->optimumCurrentIndex = opt->posPrev;
++ return lenRes;
++ }
++ p->optimumCurrentIndex = p->optimumEndIndex = 0;
++
++ if (p->additionalOffset == 0)
++ mainLen = ReadMatchDistances(p, &numPairs);
++ else
++ {
++ mainLen = p->longestMatchLength;
++ numPairs = p->numPairs;
++ }
++
++ numAvail = p->numAvail;
++ if (numAvail < 2)
++ {
++ *backRes = (UInt32)(-1);
++ return 1;
++ }
++ if (numAvail > LZMA_MATCH_LEN_MAX)
++ numAvail = LZMA_MATCH_LEN_MAX;
++
++ data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
++ repMaxIndex = 0;
++ for (i = 0; i < LZMA_NUM_REPS; i++)
++ {
++ UInt32 lenTest;
++ const Byte *data2;
++ reps[i] = p->reps[i];
++ data2 = data - (reps[i] + 1);
++ if (data[0] != data2[0] || data[1] != data2[1])
++ {
++ repLens[i] = 0;
++ continue;
++ }
++ for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++);
++ repLens[i] = lenTest;
++ if (lenTest > repLens[repMaxIndex])
++ repMaxIndex = i;
++ }
++ if (repLens[repMaxIndex] >= p->numFastBytes)
++ {
++ UInt32 lenRes;
++ *backRes = repMaxIndex;
++ lenRes = repLens[repMaxIndex];
++ MovePos(p, lenRes - 1);
++ return lenRes;
++ }
++
++ matches = p->matches;
++ if (mainLen >= p->numFastBytes)
++ {
++ *backRes = matches[numPairs - 1] + LZMA_NUM_REPS;
++ MovePos(p, mainLen - 1);
++ return mainLen;
++ }
++ curByte = *data;
++ matchByte = *(data - (reps[0] + 1));
++
++ if (mainLen < 2 && curByte != matchByte && repLens[repMaxIndex] < 2)
++ {
++ *backRes = (UInt32)-1;
++ return 1;
++ }
++
++ p->opt[0].state = (CState)p->state;
++
++ posState = (position & p->pbMask);
++
++ {
++ const CLzmaProb *probs = LIT_PROBS(position, *(data - 1));
++ p->opt[1].price = GET_PRICE_0(p->isMatch[p->state][posState]) +
++ (!IsCharState(p->state) ?
++ LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) :
++ LitEnc_GetPrice(probs, curByte, p->ProbPrices));
++ }
++
++ MakeAsChar(&p->opt[1]);
++
++ matchPrice = GET_PRICE_1(p->isMatch[p->state][posState]);
++ repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[p->state]);
++
++ if (matchByte == curByte)
++ {
++ UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, p->state, posState);
++ if (shortRepPrice < p->opt[1].price)
++ {
++ p->opt[1].price = shortRepPrice;
++ MakeAsShortRep(&p->opt[1]);
++ }
++ }
++ lenEnd = ((mainLen >= repLens[repMaxIndex]) ? mainLen : repLens[repMaxIndex]);
++
++ if (lenEnd < 2)
++ {
++ *backRes = p->opt[1].backPrev;
++ return 1;
++ }
++
++ p->opt[1].posPrev = 0;
++ for (i = 0; i < LZMA_NUM_REPS; i++)
++ p->opt[0].backs[i] = reps[i];
++
++ len = lenEnd;
++ do
++ p->opt[len--].price = kInfinityPrice;
++ while (len >= 2);
++
++ for (i = 0; i < LZMA_NUM_REPS; i++)
++ {
++ UInt32 repLen = repLens[i];
++ UInt32 price;
++ if (repLen < 2)
++ continue;
++ price = repMatchPrice + GetPureRepPrice(p, i, p->state, posState);
++ do
++ {
++ UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][repLen - 2];
++ COptimal *opt = &p->opt[repLen];
++ if (curAndLenPrice < opt->price)
++ {
++ opt->price = curAndLenPrice;
++ opt->posPrev = 0;
++ opt->backPrev = i;
++ opt->prev1IsChar = False;
++ }
++ }
++ while (--repLen >= 2);
++ }
++
++ normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[p->state]);
++
++ len = ((repLens[0] >= 2) ? repLens[0] + 1 : 2);
++ if (len <= mainLen)
++ {
++ UInt32 offs = 0;
++ while (len > matches[offs])
++ offs += 2;
++ for (; ; len++)
++ {
++ COptimal *opt;
++ UInt32 distance = matches[offs + 1];
++
++ UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN];
++ UInt32 lenToPosState = GetLenToPosState(len);
++ if (distance < kNumFullDistances)
++ curAndLenPrice += p->distancesPrices[lenToPosState][distance];
++ else
++ {
++ UInt32 slot;
++ GetPosSlot2(distance, slot);
++ curAndLenPrice += p->alignPrices[distance & kAlignMask] + p->posSlotPrices[lenToPosState][slot];
++ }
++ opt = &p->opt[len];
++ if (curAndLenPrice < opt->price)
++ {
++ opt->price = curAndLenPrice;
++ opt->posPrev = 0;
++ opt->backPrev = distance + LZMA_NUM_REPS;
++ opt->prev1IsChar = False;
++ }
++ if (len == matches[offs])
++ {
++ offs += 2;
++ if (offs == numPairs)
++ break;
++ }
++ }
++ }
++
++ cur = 0;
++
++ #ifdef SHOW_STAT2
++ if (position >= 0)
++ {
++ unsigned i;
++ printf("\n pos = %4X", position);
++ for (i = cur; i <= lenEnd; i++)
++ printf("\nprice[%4X] = %d", position - cur + i, p->opt[i].price);
++ }
++ #endif
++
++ for (;;)
++ {
++ UInt32 numAvailFull, newLen, numPairs, posPrev, state, posState, startLen;
++ UInt32 curPrice, curAnd1Price, matchPrice, repMatchPrice;
++ Bool nextIsChar;
++ Byte curByte, matchByte;
++ const Byte *data;
++ COptimal *curOpt;
++ COptimal *nextOpt;
++
++ cur++;
++ if (cur == lenEnd)
++ return Backward(p, backRes, cur);
++
++ newLen = ReadMatchDistances(p, &numPairs);
++ if (newLen >= p->numFastBytes)
++ {
++ p->numPairs = numPairs;
++ p->longestMatchLength = newLen;
++ return Backward(p, backRes, cur);
++ }
++ position++;
++ curOpt = &p->opt[cur];
++ posPrev = curOpt->posPrev;
++ if (curOpt->prev1IsChar)
++ {
++ posPrev--;
++ if (curOpt->prev2)
++ {
++ state = p->opt[curOpt->posPrev2].state;
++ if (curOpt->backPrev2 < LZMA_NUM_REPS)
++ state = kRepNextStates[state];
++ else
++ state = kMatchNextStates[state];
++ }
++ else
++ state = p->opt[posPrev].state;
++ state = kLiteralNextStates[state];
++ }
++ else
++ state = p->opt[posPrev].state;
++ if (posPrev == cur - 1)
++ {
++ if (IsShortRep(curOpt))
++ state = kShortRepNextStates[state];
++ else
++ state = kLiteralNextStates[state];
++ }
++ else
++ {
++ UInt32 pos;
++ const COptimal *prevOpt;
++ if (curOpt->prev1IsChar && curOpt->prev2)
++ {
++ posPrev = curOpt->posPrev2;
++ pos = curOpt->backPrev2;
++ state = kRepNextStates[state];
++ }
++ else
++ {
++ pos = curOpt->backPrev;
++ if (pos < LZMA_NUM_REPS)
++ state = kRepNextStates[state];
++ else
++ state = kMatchNextStates[state];
++ }
++ prevOpt = &p->opt[posPrev];
++ if (pos < LZMA_NUM_REPS)
++ {
++ UInt32 i;
++ reps[0] = prevOpt->backs[pos];
++ for (i = 1; i <= pos; i++)
++ reps[i] = prevOpt->backs[i - 1];
++ for (; i < LZMA_NUM_REPS; i++)
++ reps[i] = prevOpt->backs[i];
++ }
++ else
++ {
++ UInt32 i;
++ reps[0] = (pos - LZMA_NUM_REPS);
++ for (i = 1; i < LZMA_NUM_REPS; i++)
++ reps[i] = prevOpt->backs[i - 1];
++ }
++ }
++ curOpt->state = (CState)state;
++
++ curOpt->backs[0] = reps[0];
++ curOpt->backs[1] = reps[1];
++ curOpt->backs[2] = reps[2];
++ curOpt->backs[3] = reps[3];
++
++ curPrice = curOpt->price;
++ nextIsChar = False;
++ data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
++ curByte = *data;
++ matchByte = *(data - (reps[0] + 1));
++
++ posState = (position & p->pbMask);
++
++ curAnd1Price = curPrice + GET_PRICE_0(p->isMatch[state][posState]);
++ {
++ const CLzmaProb *probs = LIT_PROBS(position, *(data - 1));
++ curAnd1Price +=
++ (!IsCharState(state) ?
++ LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) :
++ LitEnc_GetPrice(probs, curByte, p->ProbPrices));
++ }
++
++ nextOpt = &p->opt[cur + 1];
++
++ if (curAnd1Price < nextOpt->price)
++ {
++ nextOpt->price = curAnd1Price;
++ nextOpt->posPrev = cur;
++ MakeAsChar(nextOpt);
++ nextIsChar = True;
++ }
++
++ matchPrice = curPrice + GET_PRICE_1(p->isMatch[state][posState]);
++ repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[state]);
++
++ if (matchByte == curByte && !(nextOpt->posPrev < cur && nextOpt->backPrev == 0))
++ {
++ UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, state, posState);
++ if (shortRepPrice <= nextOpt->price)
++ {
++ nextOpt->price = shortRepPrice;
++ nextOpt->posPrev = cur;
++ MakeAsShortRep(nextOpt);
++ nextIsChar = True;
++ }
++ }
++ numAvailFull = p->numAvail;
++ {
++ UInt32 temp = kNumOpts - 1 - cur;
++ if (temp < numAvailFull)
++ numAvailFull = temp;
++ }
++
++ if (numAvailFull < 2)
++ continue;
++ numAvail = (numAvailFull <= p->numFastBytes ? numAvailFull : p->numFastBytes);
++
++ if (!nextIsChar && matchByte != curByte) /* speed optimization */
++ {
++ /* try Literal + rep0 */
++ UInt32 temp;
++ UInt32 lenTest2;
++ const Byte *data2 = data - (reps[0] + 1);
++ UInt32 limit = p->numFastBytes + 1;
++ if (limit > numAvailFull)
++ limit = numAvailFull;
++
++ for (temp = 1; temp < limit && data[temp] == data2[temp]; temp++);
++ lenTest2 = temp - 1;
++ if (lenTest2 >= 2)
++ {
++ UInt32 state2 = kLiteralNextStates[state];
++ UInt32 posStateNext = (position + 1) & p->pbMask;
++ UInt32 nextRepMatchPrice = curAnd1Price +
++ GET_PRICE_1(p->isMatch[state2][posStateNext]) +
++ GET_PRICE_1(p->isRep[state2]);
++ /* for (; lenTest2 >= 2; lenTest2--) */
++ {
++ UInt32 curAndLenPrice;
++ COptimal *opt;
++ UInt32 offset = cur + 1 + lenTest2;
++ while (lenEnd < offset)
++ p->opt[++lenEnd].price = kInfinityPrice;
++ curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
++ opt = &p->opt[offset];
++ if (curAndLenPrice < opt->price)
++ {
++ opt->price = curAndLenPrice;
++ opt->posPrev = cur + 1;
++ opt->backPrev = 0;
++ opt->prev1IsChar = True;
++ opt->prev2 = False;
++ }
++ }
++ }
++ }
++
++ startLen = 2; /* speed optimization */
++ {
++ UInt32 repIndex;
++ for (repIndex = 0; repIndex < LZMA_NUM_REPS; repIndex++)
++ {
++ UInt32 lenTest;
++ UInt32 lenTestTemp;
++ UInt32 price;
++ const Byte *data2 = data - (reps[repIndex] + 1);
++ if (data[0] != data2[0] || data[1] != data2[1])
++ continue;
++ for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++);
++ while (lenEnd < cur + lenTest)
++ p->opt[++lenEnd].price = kInfinityPrice;
++ lenTestTemp = lenTest;
++ price = repMatchPrice + GetPureRepPrice(p, repIndex, state, posState);
++ do
++ {
++ UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][lenTest - 2];
++ COptimal *opt = &p->opt[cur + lenTest];
++ if (curAndLenPrice < opt->price)
++ {
++ opt->price = curAndLenPrice;
++ opt->posPrev = cur;
++ opt->backPrev = repIndex;
++ opt->prev1IsChar = False;
++ }
++ }
++ while (--lenTest >= 2);
++ lenTest = lenTestTemp;
++
++ if (repIndex == 0)
++ startLen = lenTest + 1;
++
++ /* if (_maxMode) */
++ {
++ UInt32 lenTest2 = lenTest + 1;
++ UInt32 limit = lenTest2 + p->numFastBytes;
++ UInt32 nextRepMatchPrice;
++ if (limit > numAvailFull)
++ limit = numAvailFull;
++ for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++);
++ lenTest2 -= lenTest + 1;
++ if (lenTest2 >= 2)
++ {
++ UInt32 state2 = kRepNextStates[state];
++ UInt32 posStateNext = (position + lenTest) & p->pbMask;
++ UInt32 curAndLenCharPrice =
++ price + p->repLenEnc.prices[posState][lenTest - 2] +
++ GET_PRICE_0(p->isMatch[state2][posStateNext]) +
++ LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]),
++ data[lenTest], data2[lenTest], p->ProbPrices);
++ state2 = kLiteralNextStates[state2];
++ posStateNext = (position + lenTest + 1) & p->pbMask;
++ nextRepMatchPrice = curAndLenCharPrice +
++ GET_PRICE_1(p->isMatch[state2][posStateNext]) +
++ GET_PRICE_1(p->isRep[state2]);
++
++ /* for (; lenTest2 >= 2; lenTest2--) */
++ {
++ UInt32 curAndLenPrice;
++ COptimal *opt;
++ UInt32 offset = cur + lenTest + 1 + lenTest2;
++ while (lenEnd < offset)
++ p->opt[++lenEnd].price = kInfinityPrice;
++ curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
++ opt = &p->opt[offset];
++ if (curAndLenPrice < opt->price)
++ {
++ opt->price = curAndLenPrice;
++ opt->posPrev = cur + lenTest + 1;
++ opt->backPrev = 0;
++ opt->prev1IsChar = True;
++ opt->prev2 = True;
++ opt->posPrev2 = cur;
++ opt->backPrev2 = repIndex;
++ }
++ }
++ }
++ }
++ }
++ }
++ /* for (UInt32 lenTest = 2; lenTest <= newLen; lenTest++) */
++ if (newLen > numAvail)
++ {
++ newLen = numAvail;
++ for (numPairs = 0; newLen > matches[numPairs]; numPairs += 2);
++ matches[numPairs] = newLen;
++ numPairs += 2;
++ }
++ if (newLen >= startLen)
++ {
++ UInt32 normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[state]);
++ UInt32 offs, curBack, posSlot;
++ UInt32 lenTest;
++ while (lenEnd < cur + newLen)
++ p->opt[++lenEnd].price = kInfinityPrice;
++
++ offs = 0;
++ while (startLen > matches[offs])
++ offs += 2;
++ curBack = matches[offs + 1];
++ GetPosSlot2(curBack, posSlot);
++ for (lenTest = /*2*/ startLen; ; lenTest++)
++ {
++ UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][lenTest - LZMA_MATCH_LEN_MIN];
++ UInt32 lenToPosState = GetLenToPosState(lenTest);
++ COptimal *opt;
++ if (curBack < kNumFullDistances)
++ curAndLenPrice += p->distancesPrices[lenToPosState][curBack];
++ else
++ curAndLenPrice += p->posSlotPrices[lenToPosState][posSlot] + p->alignPrices[curBack & kAlignMask];
++
++ opt = &p->opt[cur + lenTest];
++ if (curAndLenPrice < opt->price)
++ {
++ opt->price = curAndLenPrice;
++ opt->posPrev = cur;
++ opt->backPrev = curBack + LZMA_NUM_REPS;
++ opt->prev1IsChar = False;
++ }
++
++ if (/*_maxMode && */lenTest == matches[offs])
++ {
++ /* Try Match + Literal + Rep0 */
++ const Byte *data2 = data - (curBack + 1);
++ UInt32 lenTest2 = lenTest + 1;
++ UInt32 limit = lenTest2 + p->numFastBytes;
++ UInt32 nextRepMatchPrice;
++ if (limit > numAvailFull)
++ limit = numAvailFull;
++ for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++);
++ lenTest2 -= lenTest + 1;
++ if (lenTest2 >= 2)
++ {
++ UInt32 state2 = kMatchNextStates[state];
++ UInt32 posStateNext = (position + lenTest) & p->pbMask;
++ UInt32 curAndLenCharPrice = curAndLenPrice +
++ GET_PRICE_0(p->isMatch[state2][posStateNext]) +
++ LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]),
++ data[lenTest], data2[lenTest], p->ProbPrices);
++ state2 = kLiteralNextStates[state2];
++ posStateNext = (posStateNext + 1) & p->pbMask;
++ nextRepMatchPrice = curAndLenCharPrice +
++ GET_PRICE_1(p->isMatch[state2][posStateNext]) +
++ GET_PRICE_1(p->isRep[state2]);
++
++ /* for (; lenTest2 >= 2; lenTest2--) */
++ {
++ UInt32 offset = cur + lenTest + 1 + lenTest2;
++ UInt32 curAndLenPrice;
++ COptimal *opt;
++ while (lenEnd < offset)
++ p->opt[++lenEnd].price = kInfinityPrice;
++ curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
++ opt = &p->opt[offset];
++ if (curAndLenPrice < opt->price)
++ {
++ opt->price = curAndLenPrice;
++ opt->posPrev = cur + lenTest + 1;
++ opt->backPrev = 0;
++ opt->prev1IsChar = True;
++ opt->prev2 = True;
++ opt->posPrev2 = cur;
++ opt->backPrev2 = curBack + LZMA_NUM_REPS;
++ }
++ }
++ }
++ offs += 2;
++ if (offs == numPairs)
++ break;
++ curBack = matches[offs + 1];
++ if (curBack >= kNumFullDistances)
++ GetPosSlot2(curBack, posSlot);
++ }
++ }
++ }
++ }
++}
++
++#define ChangePair(smallDist, bigDist) (((bigDist) >> 7) > (smallDist))
++
++static UInt32 GetOptimumFast(CLzmaEnc *p, UInt32 *backRes)
++{
++ UInt32 numAvail, mainLen, mainDist, numPairs, repIndex, repLen, i;
++ const Byte *data;
++ const UInt32 *matches;
++
++ if (p->additionalOffset == 0)
++ mainLen = ReadMatchDistances(p, &numPairs);
++ else
++ {
++ mainLen = p->longestMatchLength;
++ numPairs = p->numPairs;
++ }
++
++ numAvail = p->numAvail;
++ *backRes = (UInt32)-1;
++ if (numAvail < 2)
++ return 1;
++ if (numAvail > LZMA_MATCH_LEN_MAX)
++ numAvail = LZMA_MATCH_LEN_MAX;
++ data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
++
++ repLen = repIndex = 0;
++ for (i = 0; i < LZMA_NUM_REPS; i++)
++ {
++ UInt32 len;
++ const Byte *data2 = data - (p->reps[i] + 1);
++ if (data[0] != data2[0] || data[1] != data2[1])
++ continue;
++ for (len = 2; len < numAvail && data[len] == data2[len]; len++);
++ if (len >= p->numFastBytes)
++ {
++ *backRes = i;
++ MovePos(p, len - 1);
++ return len;
++ }
++ if (len > repLen)
++ {
++ repIndex = i;
++ repLen = len;
++ }
++ }
++
++ matches = p->matches;
++ if (mainLen >= p->numFastBytes)
++ {
++ *backRes = matches[numPairs - 1] + LZMA_NUM_REPS;
++ MovePos(p, mainLen - 1);
++ return mainLen;
++ }
++
++ mainDist = 0; /* for GCC */
++ if (mainLen >= 2)
++ {
++ mainDist = matches[numPairs - 1];
++ while (numPairs > 2 && mainLen == matches[numPairs - 4] + 1)
++ {
++ if (!ChangePair(matches[numPairs - 3], mainDist))
++ break;
++ numPairs -= 2;
++ mainLen = matches[numPairs - 2];
++ mainDist = matches[numPairs - 1];
++ }
++ if (mainLen == 2 && mainDist >= 0x80)
++ mainLen = 1;
++ }
++
++ if (repLen >= 2 && (
++ (repLen + 1 >= mainLen) ||
++ (repLen + 2 >= mainLen && mainDist >= (1 << 9)) ||
++ (repLen + 3 >= mainLen && mainDist >= (1 << 15))))
++ {
++ *backRes = repIndex;
++ MovePos(p, repLen - 1);
++ return repLen;
++ }
++
++ if (mainLen < 2 || numAvail <= 2)
++ return 1;
++
++ p->longestMatchLength = ReadMatchDistances(p, &p->numPairs);
++ if (p->longestMatchLength >= 2)
++ {
++ UInt32 newDistance = matches[p->numPairs - 1];
++ if ((p->longestMatchLength >= mainLen && newDistance < mainDist) ||
++ (p->longestMatchLength == mainLen + 1 && !ChangePair(mainDist, newDistance)) ||
++ (p->longestMatchLength > mainLen + 1) ||
++ (p->longestMatchLength + 1 >= mainLen && mainLen >= 3 && ChangePair(newDistance, mainDist)))
++ return 1;
++ }
++
++ data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
++ for (i = 0; i < LZMA_NUM_REPS; i++)
++ {
++ UInt32 len, limit;
++ const Byte *data2 = data - (p->reps[i] + 1);
++ if (data[0] != data2[0] || data[1] != data2[1])
++ continue;
++ limit = mainLen - 1;
++ for (len = 2; len < limit && data[len] == data2[len]; len++);
++ if (len >= limit)
++ return 1;
++ }
++ *backRes = mainDist + LZMA_NUM_REPS;
++ MovePos(p, mainLen - 2);
++ return mainLen;
++}
++
++static void WriteEndMarker(CLzmaEnc *p, UInt32 posState)
++{
++ UInt32 len;
++ RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1);
++ RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0);
++ p->state = kMatchNextStates[p->state];
++ len = LZMA_MATCH_LEN_MIN;
++ LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
++ RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, (1 << kNumPosSlotBits) - 1);
++ RangeEnc_EncodeDirectBits(&p->rc, (((UInt32)1 << 30) - 1) >> kNumAlignBits, 30 - kNumAlignBits);
++ RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, kAlignMask);
++}
++
++static SRes CheckErrors(CLzmaEnc *p)
++{
++ if (p->result != SZ_OK)
++ return p->result;
++ if (p->rc.res != SZ_OK)
++ p->result = SZ_ERROR_WRITE;
++ if (p->matchFinderBase.result != SZ_OK)
++ p->result = SZ_ERROR_READ;
++ if (p->result != SZ_OK)
++ p->finished = True;
++ return p->result;
++}
++
++static SRes Flush(CLzmaEnc *p, UInt32 nowPos)
++{
++ /* ReleaseMFStream(); */
++ p->finished = True;
++ if (p->writeEndMark)
++ WriteEndMarker(p, nowPos & p->pbMask);
++ RangeEnc_FlushData(&p->rc);
++ RangeEnc_FlushStream(&p->rc);
++ return CheckErrors(p);
++}
++
++static void FillAlignPrices(CLzmaEnc *p)
++{
++ UInt32 i;
++ for (i = 0; i < kAlignTableSize; i++)
++ p->alignPrices[i] = RcTree_ReverseGetPrice(p->posAlignEncoder, kNumAlignBits, i, p->ProbPrices);
++ p->alignPriceCount = 0;
++}
++
++static void FillDistancesPrices(CLzmaEnc *p)
++{
++ UInt32 tempPrices[kNumFullDistances];
++ UInt32 i, lenToPosState;
++ for (i = kStartPosModelIndex; i < kNumFullDistances; i++)
++ {
++ UInt32 posSlot = GetPosSlot1(i);
++ UInt32 footerBits = ((posSlot >> 1) - 1);
++ UInt32 base = ((2 | (posSlot & 1)) << footerBits);
++ tempPrices[i] = RcTree_ReverseGetPrice(p->posEncoders + base - posSlot - 1, footerBits, i - base, p->ProbPrices);
++ }
++
++ for (lenToPosState = 0; lenToPosState < kNumLenToPosStates; lenToPosState++)
++ {
++ UInt32 posSlot;
++ const CLzmaProb *encoder = p->posSlotEncoder[lenToPosState];
++ UInt32 *posSlotPrices = p->posSlotPrices[lenToPosState];
++ for (posSlot = 0; posSlot < p->distTableSize; posSlot++)
++ posSlotPrices[posSlot] = RcTree_GetPrice(encoder, kNumPosSlotBits, posSlot, p->ProbPrices);
++ for (posSlot = kEndPosModelIndex; posSlot < p->distTableSize; posSlot++)
++ posSlotPrices[posSlot] += ((((posSlot >> 1) - 1) - kNumAlignBits) << kNumBitPriceShiftBits);
++
++ {
++ UInt32 *distancesPrices = p->distancesPrices[lenToPosState];
++ UInt32 i;
++ for (i = 0; i < kStartPosModelIndex; i++)
++ distancesPrices[i] = posSlotPrices[i];
++ for (; i < kNumFullDistances; i++)
++ distancesPrices[i] = posSlotPrices[GetPosSlot1(i)] + tempPrices[i];
++ }
++ }
++ p->matchPriceCount = 0;
++}
++
++void LzmaEnc_Construct(CLzmaEnc *p)
++{
++ RangeEnc_Construct(&p->rc);
++ MatchFinder_Construct(&p->matchFinderBase);
++ #ifndef _7ZIP_ST
++ MatchFinderMt_Construct(&p->matchFinderMt);
++ p->matchFinderMt.MatchFinder = &p->matchFinderBase;
++ #endif
++
++ {
++ CLzmaEncProps props;
++ LzmaEncProps_Init(&props);
++ LzmaEnc_SetProps(p, &props);
++ }
++
++ #ifndef LZMA_LOG_BSR
++ LzmaEnc_FastPosInit(p->g_FastPos);
++ #endif
++
++ LzmaEnc_InitPriceTables(p->ProbPrices);
++ p->litProbs = 0;
++ p->saveState.litProbs = 0;
++}
++
++CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc)
++{
++ void *p;
++ p = alloc->Alloc(alloc, sizeof(CLzmaEnc));
++ if (p != 0)
++ LzmaEnc_Construct((CLzmaEnc *)p);
++ return p;
++}
++
++void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
++{
++ alloc->Free(alloc, p->litProbs);
++ alloc->Free(alloc, p->saveState.litProbs);
++ p->litProbs = 0;
++ p->saveState.litProbs = 0;
++}
++
++void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++ #ifndef _7ZIP_ST
++ MatchFinderMt_Destruct(&p->matchFinderMt, allocBig);
++ #endif
++ MatchFinder_Free(&p->matchFinderBase, allocBig);
++ LzmaEnc_FreeLits(p, alloc);
++ RangeEnc_Free(&p->rc, alloc);
++}
++
++void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++ LzmaEnc_Destruct((CLzmaEnc *)p, alloc, allocBig);
++ alloc->Free(alloc, p);
++}
++
++static SRes LzmaEnc_CodeOneBlock(CLzmaEnc *p, Bool useLimits, UInt32 maxPackSize, UInt32 maxUnpackSize)
++{
++ UInt32 nowPos32, startPos32;
++ if (p->needInit)
++ {
++ p->matchFinder.Init(p->matchFinderObj);
++ p->needInit = 0;
++ }
++
++ if (p->finished)
++ return p->result;
++ RINOK(CheckErrors(p));
++
++ nowPos32 = (UInt32)p->nowPos64;
++ startPos32 = nowPos32;
++
++ if (p->nowPos64 == 0)
++ {
++ UInt32 numPairs;
++ Byte curByte;
++ if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0)
++ return Flush(p, nowPos32);
++ ReadMatchDistances(p, &numPairs);
++ RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][0], 0);
++ p->state = kLiteralNextStates[p->state];
++ curByte = p->matchFinder.GetIndexByte(p->matchFinderObj, 0 - p->additionalOffset);
++ LitEnc_Encode(&p->rc, p->litProbs, curByte);
++ p->additionalOffset--;
++ nowPos32++;
++ }
++
++ if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) != 0)
++ for (;;)
++ {
++ UInt32 pos, len, posState;
++
++ if (p->fastMode)
++ len = GetOptimumFast(p, &pos);
++ else
++ len = GetOptimum(p, nowPos32, &pos);
++
++ #ifdef SHOW_STAT2
++ printf("\n pos = %4X, len = %d pos = %d", nowPos32, len, pos);
++ #endif
++
++ posState = nowPos32 & p->pbMask;
++ if (len == 1 && pos == (UInt32)-1)
++ {
++ Byte curByte;
++ CLzmaProb *probs;
++ const Byte *data;
++
++ RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 0);
++ data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
++ curByte = *data;
++ probs = LIT_PROBS(nowPos32, *(data - 1));
++ if (IsCharState(p->state))
++ LitEnc_Encode(&p->rc, probs, curByte);
++ else
++ LitEnc_EncodeMatched(&p->rc, probs, curByte, *(data - p->reps[0] - 1));
++ p->state = kLiteralNextStates[p->state];
++ }
++ else
++ {
++ RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1);
++ if (pos < LZMA_NUM_REPS)
++ {
++ RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 1);
++ if (pos == 0)
++ {
++ RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 0);
++ RangeEnc_EncodeBit(&p->rc, &p->isRep0Long[p->state][posState], ((len == 1) ? 0 : 1));
++ }
++ else
++ {
++ UInt32 distance = p->reps[pos];
++ RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 1);
++ if (pos == 1)
++ RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 0);
++ else
++ {
++ RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 1);
++ RangeEnc_EncodeBit(&p->rc, &p->isRepG2[p->state], pos - 2);
++ if (pos == 3)
++ p->reps[3] = p->reps[2];
++ p->reps[2] = p->reps[1];
++ }
++ p->reps[1] = p->reps[0];
++ p->reps[0] = distance;
++ }
++ if (len == 1)
++ p->state = kShortRepNextStates[p->state];
++ else
++ {
++ LenEnc_Encode2(&p->repLenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
++ p->state = kRepNextStates[p->state];
++ }
++ }
++ else
++ {
++ UInt32 posSlot;
++ RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0);
++ p->state = kMatchNextStates[p->state];
++ LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
++ pos -= LZMA_NUM_REPS;
++ GetPosSlot(pos, posSlot);
++ RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, posSlot);
++
++ if (posSlot >= kStartPosModelIndex)
++ {
++ UInt32 footerBits = ((posSlot >> 1) - 1);
++ UInt32 base = ((2 | (posSlot & 1)) << footerBits);
++ UInt32 posReduced = pos - base;
++
++ if (posSlot < kEndPosModelIndex)
++ RcTree_ReverseEncode(&p->rc, p->posEncoders + base - posSlot - 1, footerBits, posReduced);
++ else
++ {
++ RangeEnc_EncodeDirectBits(&p->rc, posReduced >> kNumAlignBits, footerBits - kNumAlignBits);
++ RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, posReduced & kAlignMask);
++ p->alignPriceCount++;
++ }
++ }
++ p->reps[3] = p->reps[2];
++ p->reps[2] = p->reps[1];
++ p->reps[1] = p->reps[0];
++ p->reps[0] = pos;
++ p->matchPriceCount++;
++ }
++ }
++ p->additionalOffset -= len;
++ nowPos32 += len;
++ if (p->additionalOffset == 0)
++ {
++ UInt32 processed;
++ if (!p->fastMode)
++ {
++ if (p->matchPriceCount >= (1 << 7))
++ FillDistancesPrices(p);
++ if (p->alignPriceCount >= kAlignTableSize)
++ FillAlignPrices(p);
++ }
++ if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0)
++ break;
++ processed = nowPos32 - startPos32;
++ if (useLimits)
++ {
++ if (processed + kNumOpts + 300 >= maxUnpackSize ||
++ RangeEnc_GetProcessed(&p->rc) + kNumOpts * 2 >= maxPackSize)
++ break;
++ }
++ else if (processed >= (1 << 15))
++ {
++ p->nowPos64 += nowPos32 - startPos32;
++ return CheckErrors(p);
++ }
++ }
++ }
++ p->nowPos64 += nowPos32 - startPos32;
++ return Flush(p, nowPos32);
++}
++
++#define kBigHashDicLimit ((UInt32)1 << 24)
++
++static SRes LzmaEnc_Alloc(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++ UInt32 beforeSize = kNumOpts;
++ Bool btMode;
++ if (!RangeEnc_Alloc(&p->rc, alloc))
++ return SZ_ERROR_MEM;
++ btMode = (p->matchFinderBase.btMode != 0);
++ #ifndef _7ZIP_ST
++ p->mtMode = (p->multiThread && !p->fastMode && btMode);
++ #endif
++
++ {
++ unsigned lclp = p->lc + p->lp;
++ if (p->litProbs == 0 || p->saveState.litProbs == 0 || p->lclp != lclp)
++ {
++ LzmaEnc_FreeLits(p, alloc);
++ p->litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb));
++ p->saveState.litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb));
++ if (p->litProbs == 0 || p->saveState.litProbs == 0)
++ {
++ LzmaEnc_FreeLits(p, alloc);
++ return SZ_ERROR_MEM;
++ }
++ p->lclp = lclp;
++ }
++ }
++
++ p->matchFinderBase.bigHash = (p->dictSize > kBigHashDicLimit);
++
++ if (beforeSize + p->dictSize < keepWindowSize)
++ beforeSize = keepWindowSize - p->dictSize;
++
++ #ifndef _7ZIP_ST
++ if (p->mtMode)
++ {
++ RINOK(MatchFinderMt_Create(&p->matchFinderMt, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig));
++ p->matchFinderObj = &p->matchFinderMt;
++ MatchFinderMt_CreateVTable(&p->matchFinderMt, &p->matchFinder);
++ }
++ else
++ #endif
++ {
++ if (!MatchFinder_Create(&p->matchFinderBase, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig))
++ return SZ_ERROR_MEM;
++ p->matchFinderObj = &p->matchFinderBase;
++ MatchFinder_CreateVTable(&p->matchFinderBase, &p->matchFinder);
++ }
++ return SZ_OK;
++}
++
++void LzmaEnc_Init(CLzmaEnc *p)
++{
++ UInt32 i;
++ p->state = 0;
++ for (i = 0 ; i < LZMA_NUM_REPS; i++)
++ p->reps[i] = 0;
++
++ RangeEnc_Init(&p->rc);
++
++
++ for (i = 0; i < kNumStates; i++)
++ {
++ UInt32 j;
++ for (j = 0; j < LZMA_NUM_PB_STATES_MAX; j++)
++ {
++ p->isMatch[i][j] = kProbInitValue;
++ p->isRep0Long[i][j] = kProbInitValue;
++ }
++ p->isRep[i] = kProbInitValue;
++ p->isRepG0[i] = kProbInitValue;
++ p->isRepG1[i] = kProbInitValue;
++ p->isRepG2[i] = kProbInitValue;
++ }
++
++ {
++ UInt32 num = 0x300 << (p->lp + p->lc);
++ for (i = 0; i < num; i++)
++ p->litProbs[i] = kProbInitValue;
++ }
++
++ {
++ for (i = 0; i < kNumLenToPosStates; i++)
++ {
++ CLzmaProb *probs = p->posSlotEncoder[i];
++ UInt32 j;
++ for (j = 0; j < (1 << kNumPosSlotBits); j++)
++ probs[j] = kProbInitValue;
++ }
++ }
++ {
++ for (i = 0; i < kNumFullDistances - kEndPosModelIndex; i++)
++ p->posEncoders[i] = kProbInitValue;
++ }
++
++ LenEnc_Init(&p->lenEnc.p);
++ LenEnc_Init(&p->repLenEnc.p);
++
++ for (i = 0; i < (1 << kNumAlignBits); i++)
++ p->posAlignEncoder[i] = kProbInitValue;
++
++ p->optimumEndIndex = 0;
++ p->optimumCurrentIndex = 0;
++ p->additionalOffset = 0;
++
++ p->pbMask = (1 << p->pb) - 1;
++ p->lpMask = (1 << p->lp) - 1;
++}
++
++void LzmaEnc_InitPrices(CLzmaEnc *p)
++{
++ if (!p->fastMode)
++ {
++ FillDistancesPrices(p);
++ FillAlignPrices(p);
++ }
++
++ p->lenEnc.tableSize =
++ p->repLenEnc.tableSize =
++ p->numFastBytes + 1 - LZMA_MATCH_LEN_MIN;
++ LenPriceEnc_UpdateTables(&p->lenEnc, 1 << p->pb, p->ProbPrices);
++ LenPriceEnc_UpdateTables(&p->repLenEnc, 1 << p->pb, p->ProbPrices);
++}
++
++static SRes LzmaEnc_AllocAndInit(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++ UInt32 i;
++ for (i = 0; i < (UInt32)kDicLogSizeMaxCompress; i++)
++ if (p->dictSize <= ((UInt32)1 << i))
++ break;
++ p->distTableSize = i * 2;
++
++ p->finished = False;
++ p->result = SZ_OK;
++ RINOK(LzmaEnc_Alloc(p, keepWindowSize, alloc, allocBig));
++ LzmaEnc_Init(p);
++ LzmaEnc_InitPrices(p);
++ p->nowPos64 = 0;
++ return SZ_OK;
++}
++
++static SRes LzmaEnc_Prepare(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream,
++ ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++ CLzmaEnc *p = (CLzmaEnc *)pp;
++ p->matchFinderBase.stream = inStream;
++ p->needInit = 1;
++ p->rc.outStream = outStream;
++ return LzmaEnc_AllocAndInit(p, 0, alloc, allocBig);
++}
++
++SRes LzmaEnc_PrepareForLzma2(CLzmaEncHandle pp,
++ ISeqInStream *inStream, UInt32 keepWindowSize,
++ ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++ CLzmaEnc *p = (CLzmaEnc *)pp;
++ p->matchFinderBase.stream = inStream;
++ p->needInit = 1;
++ return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
++}
++
++static void LzmaEnc_SetInputBuf(CLzmaEnc *p, const Byte *src, SizeT srcLen)
++{
++ p->matchFinderBase.directInput = 1;
++ p->matchFinderBase.bufferBase = (Byte *)src;
++ p->matchFinderBase.directInputRem = srcLen;
++}
++
++SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen,
++ UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++ CLzmaEnc *p = (CLzmaEnc *)pp;
++ LzmaEnc_SetInputBuf(p, src, srcLen);
++ p->needInit = 1;
++
++ return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
++}
++
++void LzmaEnc_Finish(CLzmaEncHandle pp)
++{
++ #ifndef _7ZIP_ST
++ CLzmaEnc *p = (CLzmaEnc *)pp;
++ if (p->mtMode)
++ MatchFinderMt_ReleaseStream(&p->matchFinderMt);
++ #else
++ pp = pp;
++ #endif
++}
++
++typedef struct
++{
++ ISeqOutStream funcTable;
++ Byte *data;
++ SizeT rem;
++ Bool overflow;
++} CSeqOutStreamBuf;
++
++static size_t MyWrite(void *pp, const void *data, size_t size)
++{
++ CSeqOutStreamBuf *p = (CSeqOutStreamBuf *)pp;
++ if (p->rem < size)
++ {
++ size = p->rem;
++ p->overflow = True;
++ }
++ memcpy(p->data, data, size);
++ p->rem -= size;
++ p->data += size;
++ return size;
++}
++
++
++UInt32 LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp)
++{
++ const CLzmaEnc *p = (CLzmaEnc *)pp;
++ return p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
++}
++
++const Byte *LzmaEnc_GetCurBuf(CLzmaEncHandle pp)
++{
++ const CLzmaEnc *p = (CLzmaEnc *)pp;
++ return p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
++}
++
++SRes LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit,
++ Byte *dest, size_t *destLen, UInt32 desiredPackSize, UInt32 *unpackSize)
++{
++ CLzmaEnc *p = (CLzmaEnc *)pp;
++ UInt64 nowPos64;
++ SRes res;
++ CSeqOutStreamBuf outStream;
++
++ outStream.funcTable.Write = MyWrite;
++ outStream.data = dest;
++ outStream.rem = *destLen;
++ outStream.overflow = False;
++
++ p->writeEndMark = False;
++ p->finished = False;
++ p->result = SZ_OK;
++
++ if (reInit)
++ LzmaEnc_Init(p);
++ LzmaEnc_InitPrices(p);
++ nowPos64 = p->nowPos64;
++ RangeEnc_Init(&p->rc);
++ p->rc.outStream = &outStream.funcTable;
++
++ res = LzmaEnc_CodeOneBlock(p, True, desiredPackSize, *unpackSize);
++
++ *unpackSize = (UInt32)(p->nowPos64 - nowPos64);
++ *destLen -= outStream.rem;
++ if (outStream.overflow)
++ return SZ_ERROR_OUTPUT_EOF;
++
++ return res;
++}
++
++static SRes LzmaEnc_Encode2(CLzmaEnc *p, ICompressProgress *progress)
++{
++ SRes res = SZ_OK;
++
++ #ifndef _7ZIP_ST
++ Byte allocaDummy[0x300];
++ int i = 0;
++ for (i = 0; i < 16; i++)
++ allocaDummy[i] = (Byte)i;
++ #endif
++
++ for (;;)
++ {
++ res = LzmaEnc_CodeOneBlock(p, False, 0, 0);
++ if (res != SZ_OK || p->finished != 0)
++ break;
++ if (progress != 0)
++ {
++ res = progress->Progress(progress, p->nowPos64, RangeEnc_GetProcessed(&p->rc));
++ if (res != SZ_OK)
++ {
++ res = SZ_ERROR_PROGRESS;
++ break;
++ }
++ }
++ }
++ LzmaEnc_Finish(p);
++ return res;
++}
++
++SRes LzmaEnc_Encode(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream, ICompressProgress *progress,
++ ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++ RINOK(LzmaEnc_Prepare(pp, outStream, inStream, alloc, allocBig));
++ return LzmaEnc_Encode2((CLzmaEnc *)pp, progress);
++}
++
++SRes LzmaEnc_WriteProperties(CLzmaEncHandle pp, Byte *props, SizeT *size)
++{
++ CLzmaEnc *p = (CLzmaEnc *)pp;
++ int i;
++ UInt32 dictSize = p->dictSize;
++ if (*size < LZMA_PROPS_SIZE)
++ return SZ_ERROR_PARAM;
++ *size = LZMA_PROPS_SIZE;
++ props[0] = (Byte)((p->pb * 5 + p->lp) * 9 + p->lc);
++
++ for (i = 11; i <= 30; i++)
++ {
++ if (dictSize <= ((UInt32)2 << i))
++ {
++ dictSize = (2 << i);
++ break;
++ }
++ if (dictSize <= ((UInt32)3 << i))
++ {
++ dictSize = (3 << i);
++ break;
++ }
++ }
++
++ for (i = 0; i < 4; i++)
++ props[1 + i] = (Byte)(dictSize >> (8 * i));
++ return SZ_OK;
++}
++
++SRes LzmaEnc_MemEncode(CLzmaEncHandle pp, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
++ int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++ SRes res;
++ CLzmaEnc *p = (CLzmaEnc *)pp;
++
++ CSeqOutStreamBuf outStream;
++
++ LzmaEnc_SetInputBuf(p, src, srcLen);
++
++ outStream.funcTable.Write = MyWrite;
++ outStream.data = dest;
++ outStream.rem = *destLen;
++ outStream.overflow = False;
++
++ p->writeEndMark = writeEndMark;
++
++ p->rc.outStream = &outStream.funcTable;
++ res = LzmaEnc_MemPrepare(pp, src, srcLen, 0, alloc, allocBig);
++ if (res == SZ_OK)
++ res = LzmaEnc_Encode2(p, progress);
++
++ *destLen -= outStream.rem;
++ if (outStream.overflow)
++ return SZ_ERROR_OUTPUT_EOF;
++ return res;
++}
++
++SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
++ const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
++ ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++ CLzmaEnc *p = (CLzmaEnc *)LzmaEnc_Create(alloc);
++ SRes res;
++ if (p == 0)
++ return SZ_ERROR_MEM;
++
++ res = LzmaEnc_SetProps(p, props);
++ if (res == SZ_OK)
++ {
++ res = LzmaEnc_WriteProperties(p, propsEncoded, propsSize);
++ if (res == SZ_OK)
++ res = LzmaEnc_MemEncode(p, dest, destLen, src, srcLen,
++ writeEndMark, progress, alloc, allocBig);
++ }
++
++ LzmaEnc_Destroy(p, alloc, allocBig);
++ return res;
++}
+--- /dev/null
++++ b/lib/lzma/Makefile
+@@ -0,0 +1,7 @@
++lzma_compress-objs := LzFind.o LzmaEnc.o
++lzma_decompress-objs := LzmaDec.o
++
++obj-$(CONFIG_LZMA_COMPRESS) += lzma_compress.o
++obj-$(CONFIG_LZMA_DECOMPRESS) += lzma_decompress.o
++
++EXTRA_CFLAGS += -Iinclude/linux -Iinclude/linux/lzma -include types.h
--- /dev/null
+--- a/include/linux/lzma/LzmaDec.h
++++ b/include/linux/lzma/LzmaDec.h
+@@ -31,14 +31,6 @@ typedef struct _CLzmaProps
+ UInt32 dicSize;
+ } CLzmaProps;
+
+-/* LzmaProps_Decode - decodes properties
+-Returns:
+- SZ_OK
+- SZ_ERROR_UNSUPPORTED - Unsupported properties
+-*/
+-
+-SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size);
+-
+
+ /* ---------- LZMA Decoder state ---------- */
+
+@@ -70,8 +62,6 @@ typedef struct
+
+ #define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; }
+
+-void LzmaDec_Init(CLzmaDec *p);
+-
+ /* There are two types of LZMA streams:
+ 0) Stream with end mark. That end mark adds about 6 bytes to compressed size.
+ 1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */
+@@ -108,97 +98,6 @@ typedef enum
+
+ /* ELzmaStatus is used only as output value for function call */
+
+-
+-/* ---------- Interfaces ---------- */
+-
+-/* There are 3 levels of interfaces:
+- 1) Dictionary Interface
+- 2) Buffer Interface
+- 3) One Call Interface
+- You can select any of these interfaces, but don't mix functions from different
+- groups for same object. */
+-
+-
+-/* There are two variants to allocate state for Dictionary Interface:
+- 1) LzmaDec_Allocate / LzmaDec_Free
+- 2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs
+- You can use variant 2, if you set dictionary buffer manually.
+- For Buffer Interface you must always use variant 1.
+-
+-LzmaDec_Allocate* can return:
+- SZ_OK
+- SZ_ERROR_MEM - Memory allocation error
+- SZ_ERROR_UNSUPPORTED - Unsupported properties
+-*/
+-
+-SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc);
+-void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc);
+-
+-SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc);
+-void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc);
+-
+-/* ---------- Dictionary Interface ---------- */
+-
+-/* You can use it, if you want to eliminate the overhead for data copying from
+- dictionary to some other external buffer.
+- You must work with CLzmaDec variables directly in this interface.
+-
+- STEPS:
+- LzmaDec_Constr()
+- LzmaDec_Allocate()
+- for (each new stream)
+- {
+- LzmaDec_Init()
+- while (it needs more decompression)
+- {
+- LzmaDec_DecodeToDic()
+- use data from CLzmaDec::dic and update CLzmaDec::dicPos
+- }
+- }
+- LzmaDec_Free()
+-*/
+-
+-/* LzmaDec_DecodeToDic
+-
+- The decoding to internal dictionary buffer (CLzmaDec::dic).
+- You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!!
+-
+-finishMode:
+- It has meaning only if the decoding reaches output limit (dicLimit).
+- LZMA_FINISH_ANY - Decode just dicLimit bytes.
+- LZMA_FINISH_END - Stream must be finished after dicLimit.
+-
+-Returns:
+- SZ_OK
+- status:
+- LZMA_STATUS_FINISHED_WITH_MARK
+- LZMA_STATUS_NOT_FINISHED
+- LZMA_STATUS_NEEDS_MORE_INPUT
+- LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
+- SZ_ERROR_DATA - Data error
+-*/
+-
+-SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit,
+- const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
+-
+-
+-/* ---------- Buffer Interface ---------- */
+-
+-/* It's zlib-like interface.
+- See LzmaDec_DecodeToDic description for information about STEPS and return results,
+- but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need
+- to work with CLzmaDec variables manually.
+-
+-finishMode:
+- It has meaning only if the decoding reaches output limit (*destLen).
+- LZMA_FINISH_ANY - Decode just destLen bytes.
+- LZMA_FINISH_END - Stream must be finished after (*destLen).
+-*/
+-
+-SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
+- const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
+-
+-
+ /* ---------- One Call Interface ---------- */
+
+ /* LzmaDecode
+--- a/lib/lzma/LzmaDec.c
++++ b/lib/lzma/LzmaDec.c
+@@ -682,7 +682,7 @@ static void LzmaDec_InitRc(CLzmaDec *p,
+ p->needFlush = 0;
+ }
+
+-void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
++static void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
+ {
+ p->needFlush = 1;
+ p->remainLen = 0;
+@@ -698,7 +698,7 @@ void LzmaDec_InitDicAndState(CLzmaDec *p
+ p->needInitState = 1;
+ }
+
+-void LzmaDec_Init(CLzmaDec *p)
++static void LzmaDec_Init(CLzmaDec *p)
+ {
+ p->dicPos = 0;
+ LzmaDec_InitDicAndState(p, True, True);
+@@ -716,7 +716,7 @@ static void LzmaDec_InitStateReal(CLzmaD
+ p->needInitState = 0;
+ }
+
+-SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
++static SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
+ ELzmaFinishMode finishMode, ELzmaStatus *status)
+ {
+ SizeT inSize = *srcLen;
+@@ -837,7 +837,7 @@ SRes LzmaDec_DecodeToDic(CLzmaDec *p, Si
+ return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA;
+ }
+
+-SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status)
++static __maybe_unused SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status)
+ {
+ SizeT outSize = *destLen;
+ SizeT inSize = *srcLen;
+@@ -877,7 +877,7 @@ SRes LzmaDec_DecodeToBuf(CLzmaDec *p, By
+ }
+ }
+
+-void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
++static void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
+ {
+ alloc->Free(alloc, p->probs);
+ p->probs = 0;
+@@ -889,13 +889,13 @@ static void LzmaDec_FreeDict(CLzmaDec *p
+ p->dic = 0;
+ }
+
+-void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc)
++static void __maybe_unused LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc)
+ {
+ LzmaDec_FreeProbs(p, alloc);
+ LzmaDec_FreeDict(p, alloc);
+ }
+
+-SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
++static SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
+ {
+ UInt32 dicSize;
+ Byte d;
+@@ -935,7 +935,7 @@ static SRes LzmaDec_AllocateProbs2(CLzma
+ return SZ_OK;
+ }
+
+-SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
++static SRes __maybe_unused LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
+ {
+ CLzmaProps propNew;
+ RINOK(LzmaProps_Decode(&propNew, props, propsSize));
+@@ -944,7 +944,7 @@ SRes LzmaDec_AllocateProbs(CLzmaDec *p,
+ return SZ_OK;
+ }
+
+-SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
++static SRes __maybe_unused LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
+ {
+ CLzmaProps propNew;
+ SizeT dicBufSize;
+--- a/include/linux/lzma/LzmaEnc.h
++++ b/include/linux/lzma/LzmaEnc.h
+@@ -31,9 +31,6 @@ typedef struct _CLzmaEncProps
+ } CLzmaEncProps;
+
+ void LzmaEncProps_Init(CLzmaEncProps *p);
+-void LzmaEncProps_Normalize(CLzmaEncProps *p);
+-UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2);
+-
+
+ /* ---------- CLzmaEncHandle Interface ---------- */
+
+@@ -53,26 +50,9 @@ CLzmaEncHandle LzmaEnc_Create(ISzAlloc *
+ void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig);
+ SRes LzmaEnc_SetProps(CLzmaEncHandle p, const CLzmaEncProps *props);
+ SRes LzmaEnc_WriteProperties(CLzmaEncHandle p, Byte *properties, SizeT *size);
+-SRes LzmaEnc_Encode(CLzmaEncHandle p, ISeqOutStream *outStream, ISeqInStream *inStream,
+- ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
+ SRes LzmaEnc_MemEncode(CLzmaEncHandle p, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
+ int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
+
+-/* ---------- One Call Interface ---------- */
+-
+-/* LzmaEncode
+-Return code:
+- SZ_OK - OK
+- SZ_ERROR_MEM - Memory allocation error
+- SZ_ERROR_PARAM - Incorrect paramater
+- SZ_ERROR_OUTPUT_EOF - output buffer overflow
+- SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version)
+-*/
+-
+-SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
+- const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
+- ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
+-
+ #ifdef __cplusplus
+ }
+ #endif
+--- a/lib/lzma/LzmaEnc.c
++++ b/lib/lzma/LzmaEnc.c
+@@ -53,7 +53,7 @@ void LzmaEncProps_Init(CLzmaEncProps *p)
+ p->writeEndMark = 0;
+ }
+
+-void LzmaEncProps_Normalize(CLzmaEncProps *p)
++static void LzmaEncProps_Normalize(CLzmaEncProps *p)
+ {
+ int level = p->level;
+ if (level < 0) level = 5;
+@@ -76,7 +76,7 @@ void LzmaEncProps_Normalize(CLzmaEncProp
+ #endif
+ }
+
+-UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
++static UInt32 __maybe_unused LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
+ {
+ CLzmaEncProps props = *props2;
+ LzmaEncProps_Normalize(&props);
+@@ -93,7 +93,7 @@ UInt32 LzmaEncProps_GetDictSize(const CL
+
+ #define BSR2_RET(pos, res) { unsigned long i; _BitScanReverse(&i, (pos)); res = (i + i) + ((pos >> (i - 1)) & 1); }
+
+-UInt32 GetPosSlot1(UInt32 pos)
++static UInt32 GetPosSlot1(UInt32 pos)
+ {
+ UInt32 res;
+ BSR2_RET(pos, res);
+@@ -107,7 +107,7 @@ UInt32 GetPosSlot1(UInt32 pos)
+ #define kNumLogBits (9 + (int)sizeof(size_t) / 2)
+ #define kDicLogSizeMaxCompress ((kNumLogBits - 1) * 2 + 7)
+
+-void LzmaEnc_FastPosInit(Byte *g_FastPos)
++static void LzmaEnc_FastPosInit(Byte *g_FastPos)
+ {
+ int c = 2, slotFast;
+ g_FastPos[0] = 0;
+@@ -339,7 +339,7 @@ typedef struct
+ CSaveState saveState;
+ } CLzmaEnc;
+
+-void LzmaEnc_SaveState(CLzmaEncHandle pp)
++static void __maybe_unused LzmaEnc_SaveState(CLzmaEncHandle pp)
+ {
+ CLzmaEnc *p = (CLzmaEnc *)pp;
+ CSaveState *dest = &p->saveState;
+@@ -365,7 +365,7 @@ void LzmaEnc_SaveState(CLzmaEncHandle pp
+ memcpy(dest->litProbs, p->litProbs, (0x300 << p->lclp) * sizeof(CLzmaProb));
+ }
+
+-void LzmaEnc_RestoreState(CLzmaEncHandle pp)
++static void __maybe_unused LzmaEnc_RestoreState(CLzmaEncHandle pp)
+ {
+ CLzmaEnc *dest = (CLzmaEnc *)pp;
+ const CSaveState *p = &dest->saveState;
+@@ -600,7 +600,7 @@ static void LitEnc_EncodeMatched(CRangeE
+ while (symbol < 0x10000);
+ }
+
+-void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
++static void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
+ {
+ UInt32 i;
+ for (i = (1 << kNumMoveReducingBits) / 2; i < kBitModelTotal; i += (1 << kNumMoveReducingBits))
+@@ -1676,7 +1676,7 @@ static void FillDistancesPrices(CLzmaEnc
+ p->matchPriceCount = 0;
+ }
+
+-void LzmaEnc_Construct(CLzmaEnc *p)
++static void LzmaEnc_Construct(CLzmaEnc *p)
+ {
+ RangeEnc_Construct(&p->rc);
+ MatchFinder_Construct(&p->matchFinderBase);
+@@ -1709,7 +1709,7 @@ CLzmaEncHandle LzmaEnc_Create(ISzAlloc *
+ return p;
+ }
+
+-void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
++static void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
+ {
+ alloc->Free(alloc, p->litProbs);
+ alloc->Free(alloc, p->saveState.litProbs);
+@@ -2074,7 +2074,7 @@ SRes LzmaEnc_MemPrepare(CLzmaEncHandle p
+ return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
+ }
+
+-void LzmaEnc_Finish(CLzmaEncHandle pp)
++static void LzmaEnc_Finish(CLzmaEncHandle pp)
+ {
+ #ifndef _7ZIP_ST
+ CLzmaEnc *p = (CLzmaEnc *)pp;
+@@ -2108,7 +2108,7 @@ static size_t MyWrite(void *pp, const vo
+ }
+
+
+-UInt32 LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp)
++static UInt32 __maybe_unused LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp)
+ {
+ const CLzmaEnc *p = (CLzmaEnc *)pp;
+ return p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
+@@ -2120,7 +2120,7 @@ const Byte *LzmaEnc_GetCurBuf(CLzmaEncHa
+ return p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
+ }
+
+-SRes LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit,
++static SRes __maybe_unused LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit,
+ Byte *dest, size_t *destLen, UInt32 desiredPackSize, UInt32 *unpackSize)
+ {
+ CLzmaEnc *p = (CLzmaEnc *)pp;
+@@ -2248,7 +2248,7 @@ SRes LzmaEnc_MemEncode(CLzmaEncHandle pp
+ return res;
+ }
+
+-SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
++static __maybe_unused SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
+ const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
+ ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
+ {
+--- a/include/linux/lzma/LzFind.h
++++ b/include/linux/lzma/LzFind.h
+@@ -55,11 +55,6 @@ typedef struct _CMatchFinder
+
+ #define Inline_MatchFinder_GetNumAvailableBytes(p) ((p)->streamPos - (p)->pos)
+
+-int MatchFinder_NeedMove(CMatchFinder *p);
+-Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p);
+-void MatchFinder_MoveBlock(CMatchFinder *p);
+-void MatchFinder_ReadIfRequired(CMatchFinder *p);
+-
+ void MatchFinder_Construct(CMatchFinder *p);
+
+ /* Conditions:
+@@ -70,12 +65,6 @@ int MatchFinder_Create(CMatchFinder *p,
+ UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
+ ISzAlloc *alloc);
+ void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc);
+-void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems);
+-void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue);
+-
+-UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *buffer, CLzRef *son,
+- UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 _cutValue,
+- UInt32 *distances, UInt32 maxLen);
+
+ /*
+ Conditions:
+@@ -102,12 +91,6 @@ typedef struct _IMatchFinder
+
+ void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable);
+
+-void MatchFinder_Init(CMatchFinder *p);
+-UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
+-UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
+-void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
+-void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
+-
+ #ifdef __cplusplus
+ }
+ #endif
+--- a/lib/lzma/LzFind.c
++++ b/lib/lzma/LzFind.c
+@@ -42,12 +42,12 @@ static int LzInWindow_Create(CMatchFinde
+ return (p->bufferBase != 0);
+ }
+
+-Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
+-Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
++static Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
++static Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
+
+-UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
++static UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
+
+-void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
++static void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
+ {
+ p->posLimit -= subValue;
+ p->pos -= subValue;
+@@ -268,7 +268,7 @@ static void MatchFinder_SetLimits(CMatch
+ p->posLimit = p->pos + limit;
+ }
+
+-void MatchFinder_Init(CMatchFinder *p)
++static void MatchFinder_Init(CMatchFinder *p)
+ {
+ UInt32 i;
+ for (i = 0; i < p->hashSizeSum; i++)
+@@ -287,7 +287,7 @@ static UInt32 MatchFinder_GetSubValue(CM
+ return (p->pos - p->historySize - 1) & kNormalizeMask;
+ }
+
+-void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
++static void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
+ {
+ UInt32 i;
+ for (i = 0; i < numItems; i++)
+@@ -350,7 +350,7 @@ static UInt32 * Hc_GetMatchesSpec(UInt32
+ }
+ }
+
+-UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
++static UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
+ UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
+ UInt32 *distances, UInt32 maxLen)
+ {
+@@ -492,7 +492,7 @@ static UInt32 Bt2_MatchFinder_GetMatches
+ GET_MATCHES_FOOTER(offset, 1)
+ }
+
+-UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++static __maybe_unused UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
+ {
+ UInt32 offset;
+ GET_MATCHES_HEADER(3)
+@@ -632,7 +632,7 @@ static UInt32 Hc4_MatchFinder_GetMatches
+ MOVE_POS_RET
+ }
+
+-UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++static __maybe_unused UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
+ {
+ UInt32 offset;
+ GET_MATCHES_HEADER(3)
+@@ -657,7 +657,7 @@ static void Bt2_MatchFinder_Skip(CMatchF
+ while (--num != 0);
+ }
+
+-void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++static __maybe_unused void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
+ {
+ do
+ {
+@@ -718,7 +718,7 @@ static void Hc4_MatchFinder_Skip(CMatchF
+ while (--num != 0);
+ }
+
+-void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++static __maybe_unused void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
+ {
+ do
+ {
--- /dev/null
+--- a/fs/jffs2/build.c
++++ b/fs/jffs2/build.c
+@@ -114,6 +114,16 @@ static int jffs2_build_filesystem(struct
+ dbg_fsbuild("scanned flash completely\n");
+ jffs2_dbg_dump_block_lists_nolock(c);
+
++ if (c->flags & (1 << 7)) {
++ printk("%s(): unlocking the mtd device... ", __func__);
++ mtd_unlock(c->mtd, 0, c->mtd->size);
++ printk("done.\n");
++
++ printk("%s(): erasing all blocks after the end marker... ", __func__);
++ jffs2_erase_pending_blocks(c, -1);
++ printk("done.\n");
++ }
++
+ dbg_fsbuild("pass 1 starting\n");
+ c->flags |= JFFS2_SB_FLAG_BUILDING;
+ /* Now scan the directory tree, increasing nlink according to every dirent found. */
+--- a/fs/jffs2/scan.c
++++ b/fs/jffs2/scan.c
+@@ -148,8 +148,11 @@ int jffs2_scan_medium(struct jffs2_sb_in
+ /* reset summary info for next eraseblock scan */
+ jffs2_sum_reset_collected(s);
+
+- ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
+- buf_size, s);
++ if (c->flags & (1 << 7))
++ ret = BLK_STATE_ALLFF;
++ else
++ ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
++ buf_size, s);
+
+ if (ret < 0)
+ goto out;
+@@ -556,6 +559,17 @@ static int jffs2_scan_eraseblock (struct
+ return err;
+ }
+
++ if ((buf[0] == 0xde) &&
++ (buf[1] == 0xad) &&
++ (buf[2] == 0xc0) &&
++ (buf[3] == 0xde)) {
++ /* end of filesystem. erase everything after this point */
++ printk("%s(): End of filesystem marker found at 0x%x\n", __func__, jeb->offset);
++ c->flags |= (1 << 7);
++
++ return BLK_STATE_ALLFF;
++ }
++
+ /* We temporarily use 'ofs' as a pointer into the buffer/jeb */
+ ofs = 0;
+ max_ofs = EMPTY_SCAN_SIZE(c->sector_size);
--- /dev/null
+--- a/crypto/Kconfig
++++ b/crypto/Kconfig
+@@ -1181,6 +1181,13 @@ config CRYPTO_842
+ help
+ This is the 842 algorithm.
+
++config CRYPTO_XZ
++ tristate "XZ compression algorithm"
++ select CRYPTO_ALGAPI
++ select XZ_DEC
++ help
++ This is the XZ algorithm. Only decompression is supported for now.
++
+ comment "Random Number Generation"
+
+ config CRYPTO_ANSI_CPRNG
+--- a/crypto/Makefile
++++ b/crypto/Makefile
+@@ -82,6 +82,7 @@ obj-$(CONFIG_CRYPTO_MICHAEL_MIC) += mich
+ obj-$(CONFIG_CRYPTO_CRC32C) += crc32c.o
+ obj-$(CONFIG_CRYPTO_AUTHENC) += authenc.o authencesn.o
+ obj-$(CONFIG_CRYPTO_LZO) += lzo.o
++obj-$(CONFIG_CRYPTO_XZ) += xz.o
+ obj-$(CONFIG_CRYPTO_842) += 842.o
+ obj-$(CONFIG_CRYPTO_RNG2) += rng.o
+ obj-$(CONFIG_CRYPTO_RNG2) += krng.o
+--- /dev/null
++++ b/crypto/xz.c
+@@ -0,0 +1,117 @@
++/*
++ * Cryptographic API.
++ *
++ * XZ decompression support.
++ *
++ * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ */
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/crypto.h>
++#include <linux/xz.h>
++#include <linux/interrupt.h>
++#include <linux/mm.h>
++#include <linux/net.h>
++
++struct xz_comp_ctx {
++ struct xz_dec *decomp_state;
++ struct xz_buf decomp_buf;
++};
++
++static int crypto_xz_decomp_init(struct xz_comp_ctx *ctx)
++{
++ ctx->decomp_state = xz_dec_init(XZ_SINGLE, 0);
++ if (!ctx->decomp_state)
++ return -ENOMEM;
++
++ return 0;
++}
++
++static void crypto_xz_decomp_exit(struct xz_comp_ctx *ctx)
++{
++ xz_dec_end(ctx->decomp_state);
++}
++
++static int crypto_xz_init(struct crypto_tfm *tfm)
++{
++ struct xz_comp_ctx *ctx = crypto_tfm_ctx(tfm);
++
++ return crypto_xz_decomp_init(ctx);
++}
++
++static void crypto_xz_exit(struct crypto_tfm *tfm)
++{
++ struct xz_comp_ctx *ctx = crypto_tfm_ctx(tfm);
++
++ crypto_xz_decomp_exit(ctx);
++}
++
++static int crypto_xz_compress(struct crypto_tfm *tfm, const u8 *src,
++ unsigned int slen, u8 *dst, unsigned int *dlen)
++{
++ return -EOPNOTSUPP;
++}
++
++static int crypto_xz_decompress(struct crypto_tfm *tfm, const u8 *src,
++ unsigned int slen, u8 *dst, unsigned int *dlen)
++{
++ struct xz_comp_ctx *dctx = crypto_tfm_ctx(tfm);
++ struct xz_buf *xz_buf = &dctx->decomp_buf;
++ int ret;
++
++ memset(xz_buf, '\0', sizeof(struct xz_buf));
++
++ xz_buf->in = (u8 *) src;
++ xz_buf->in_pos = 0;
++ xz_buf->in_size = slen;
++ xz_buf->out = (u8 *) dst;
++ xz_buf->out_pos = 0;
++ xz_buf->out_size = *dlen;
++
++ ret = xz_dec_run(dctx->decomp_state, xz_buf);
++ if (ret != XZ_STREAM_END) {
++ ret = -EINVAL;
++ goto out;
++ }
++
++ *dlen = xz_buf->out_pos;
++ ret = 0;
++
++out:
++ return ret;
++}
++
++static struct crypto_alg crypto_xz_alg = {
++ .cra_name = "xz",
++ .cra_flags = CRYPTO_ALG_TYPE_COMPRESS,
++ .cra_ctxsize = sizeof(struct xz_comp_ctx),
++ .cra_module = THIS_MODULE,
++ .cra_list = LIST_HEAD_INIT(crypto_xz_alg.cra_list),
++ .cra_init = crypto_xz_init,
++ .cra_exit = crypto_xz_exit,
++ .cra_u = { .compress = {
++ .coa_compress = crypto_xz_compress,
++ .coa_decompress = crypto_xz_decompress } }
++};
++
++static int __init crypto_xz_mod_init(void)
++{
++ return crypto_register_alg(&crypto_xz_alg);
++}
++
++static void __exit crypto_xz_mod_exit(void)
++{
++ crypto_unregister_alg(&crypto_xz_alg);
++}
++
++module_init(crypto_xz_mod_init);
++module_exit(crypto_xz_mod_exit);
++
++MODULE_LICENSE("GPL v2");
++MODULE_DESCRIPTION("Crypto XZ decompression support");
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
--- /dev/null
+--- a/fs/ubifs/Kconfig
++++ b/fs/ubifs/Kconfig
+@@ -5,8 +5,10 @@ config UBIFS_FS
+ select CRYPTO if UBIFS_FS_ADVANCED_COMPR
+ select CRYPTO if UBIFS_FS_LZO
+ select CRYPTO if UBIFS_FS_ZLIB
++ select CRYPTO if UBIFS_FS_XZ
+ select CRYPTO_LZO if UBIFS_FS_LZO
+ select CRYPTO_DEFLATE if UBIFS_FS_ZLIB
++ select CRYPTO_XZ if UBIFS_FS_XZ
+ depends on MTD_UBI
+ help
+ UBIFS is a file system for flash devices which works on top of UBI.
+@@ -35,3 +37,12 @@ config UBIFS_FS_ZLIB
+ default y
+ help
+ Zlib compresses better than LZO but it is slower. Say 'Y' if unsure.
++
++config UBIFS_FS_XZ
++ bool "XZ decompression support" if UBIFS_FS_ADVANCED_COMPR
++ depends on UBIFS_FS
++ default y
++ help
++ XZ compresses better the ZLIB but it is slower..
++ Say 'Y' if unsure.
++
+--- a/fs/ubifs/compress.c
++++ b/fs/ubifs/compress.c
+@@ -71,6 +71,24 @@ static struct ubifs_compressor zlib_comp
+ };
+ #endif
+
++#ifdef CONFIG_UBIFS_FS_XZ
++static DEFINE_MUTEX(xz_enc_mutex);
++static DEFINE_MUTEX(xz_dec_mutex);
++
++static struct ubifs_compressor xz_compr = {
++ .compr_type = UBIFS_COMPR_XZ,
++ .comp_mutex = &xz_enc_mutex,
++ .decomp_mutex = &xz_dec_mutex,
++ .name = "xz",
++ .capi_name = "xz",
++};
++#else
++static struct ubifs_compressor zlib_compr = {
++ .compr_type = UBIFS_COMPR_XZ,
++ .name = "xz",
++};
++#endif
++
+ /* All UBIFS compressors */
+ struct ubifs_compressor *ubifs_compressors[UBIFS_COMPR_TYPES_CNT];
+
+@@ -232,9 +250,15 @@ int __init ubifs_compressors_init(void)
+ if (err)
+ goto out_lzo;
+
++ err = compr_init(&xz_compr);
++ if (err)
++ goto out_zlib;
++
+ ubifs_compressors[UBIFS_COMPR_NONE] = &none_compr;
+ return 0;
+
++out_zlib:
++ compr_exit(&zlib_compr);
+ out_lzo:
+ compr_exit(&lzo_compr);
+ return err;
+@@ -247,4 +271,5 @@ void ubifs_compressors_exit(void)
+ {
+ compr_exit(&lzo_compr);
+ compr_exit(&zlib_compr);
++ compr_exit(&xz_compr);
+ }
+--- a/fs/ubifs/ubifs-media.h
++++ b/fs/ubifs/ubifs-media.h
+@@ -332,12 +332,14 @@ enum {
+ * UBIFS_COMPR_NONE: no compression
+ * UBIFS_COMPR_LZO: LZO compression
+ * UBIFS_COMPR_ZLIB: ZLIB compression
++ * UBIFS_COMPR_XZ: XZ compression
+ * UBIFS_COMPR_TYPES_CNT: count of supported compression types
+ */
+ enum {
+ UBIFS_COMPR_NONE,
+ UBIFS_COMPR_LZO,
+ UBIFS_COMPR_ZLIB,
++ UBIFS_COMPR_XZ,
+ UBIFS_COMPR_TYPES_CNT,
+ };
+
--- /dev/null
+--- a/fs/ubifs/file.c
++++ b/fs/ubifs/file.c
+@@ -1574,6 +1574,12 @@ const struct inode_operations ubifs_syml
+ .follow_link = ubifs_follow_link,
+ .setattr = ubifs_setattr,
+ .getattr = ubifs_getattr,
++#ifdef CONFIG_UBIFS_FS_XATTR
++ .setxattr = ubifs_setxattr,
++ .getxattr = ubifs_getxattr,
++ .listxattr = ubifs_listxattr,
++ .removexattr = ubifs_removexattr,
++#endif
+ };
+
+ const struct file_operations ubifs_file_operations = {
+--- a/fs/ubifs/journal.c
++++ b/fs/ubifs/journal.c
+@@ -553,7 +553,8 @@ int ubifs_jnl_update(struct ubifs_info *
+
+ dbg_jnl("ino %lu, dent '%.*s', data len %d in dir ino %lu",
+ inode->i_ino, nm->len, nm->name, ui->data_len, dir->i_ino);
+- ubifs_assert(dir_ui->data_len == 0);
++ if (!xent)
++ ubifs_assert(dir_ui->data_len == 0);
+ ubifs_assert(mutex_is_locked(&dir_ui->ui_mutex));
+
+ dlen = UBIFS_DENT_NODE_SZ + nm->len + 1;
+@@ -573,6 +574,13 @@ int ubifs_jnl_update(struct ubifs_info *
+ aligned_dlen = ALIGN(dlen, 8);
+ aligned_ilen = ALIGN(ilen, 8);
+ len = aligned_dlen + aligned_ilen + UBIFS_INO_NODE_SZ;
++ if (xent) {
++ /*
++ * Make sure to account for dir_ui->data_len in
++ * length calculation in case there is extended attribute.
++ */
++ len += dir_ui->data_len;
++ }
+ dent = kmalloc(len, GFP_NOFS);
+ if (!dent)
+ return -ENOMEM;
+@@ -649,7 +657,8 @@ int ubifs_jnl_update(struct ubifs_info *
+
+ ino_key_init(c, &ino_key, dir->i_ino);
+ ino_offs += aligned_ilen;
+- err = ubifs_tnc_add(c, &ino_key, lnum, ino_offs, UBIFS_INO_NODE_SZ);
++ err = ubifs_tnc_add(c, &ino_key, lnum, ino_offs,
++ UBIFS_INO_NODE_SZ + dir_ui->data_len);
+ if (err)
+ goto out_ro;
+
+--- a/fs/ubifs/xattr.c
++++ b/fs/ubifs/xattr.c
+@@ -209,12 +209,12 @@ static int change_xattr(struct ubifs_inf
+ goto out_free;
+ }
+ inode->i_size = ui->ui_size = size;
+- ui->data_len = size;
+
+ mutex_lock(&host_ui->ui_mutex);
+ host->i_ctime = ubifs_current_time(host);
+ host_ui->xattr_size -= CALC_XATTR_BYTES(ui->data_len);
+ host_ui->xattr_size += CALC_XATTR_BYTES(size);
++ ui->data_len = size;
+
+ /*
+ * It is important to write the host inode after the xattr inode
--- /dev/null
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -1176,6 +1176,27 @@ config NETFILTER_XT_MATCH_STATE
+
+ To compile it as a module, choose M here. If unsure, say N.
+
++config NETFILTER_XT_MATCH_LAYER7
++ tristate '"layer7" match support'
++ depends on NETFILTER_XTABLES
++ depends on EXPERIMENTAL && (IP_NF_CONNTRACK || NF_CONNTRACK)
++ depends on NETFILTER_ADVANCED
++ help
++ Say Y if you want to be able to classify connections (and their
++ packets) based on regular expression matching of their application
++ layer data. This is one way to classify applications such as
++ peer-to-peer filesharing systems that do not always use the same
++ port.
++
++ To compile it as a module, choose M here. If unsure, say N.
++
++config NETFILTER_XT_MATCH_LAYER7_DEBUG
++ bool 'Layer 7 debugging output'
++ depends on NETFILTER_XT_MATCH_LAYER7
++ help
++ Say Y to get lots of debugging output.
++
++
+ config NETFILTER_XT_MATCH_STATISTIC
+ tristate '"statistic" match support'
+ depends on NETFILTER_ADVANCED
+--- a/net/netfilter/Makefile
++++ b/net/netfilter/Makefile
+@@ -131,6 +131,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_RECENT)
+ obj-$(CONFIG_NETFILTER_XT_MATCH_SCTP) += xt_sctp.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_SOCKET) += xt_socket.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STATE) += xt_state.o
++obj-$(CONFIG_NETFILTER_XT_MATCH_LAYER7) += xt_layer7.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STATISTIC) += xt_statistic.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STRING) += xt_string.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_TCPMSS) += xt_tcpmss.o
+--- /dev/null
++++ b/net/netfilter/xt_layer7.c
+@@ -0,0 +1,666 @@
++/*
++ Kernel module to match application layer (OSI layer 7) data in connections.
++
++ http://l7-filter.sf.net
++
++ (C) 2003-2009 Matthew Strait and Ethan Sommer.
++
++ This program is free software; you can redistribute it and/or
++ modify it under the terms of the GNU General Public License
++ as published by the Free Software Foundation; either version
++ 2 of the License, or (at your option) any later version.
++ http://www.gnu.org/licenses/gpl.txt
++
++ Based on ipt_string.c (C) 2000 Emmanuel Roger <winfield@freegates.be>,
++ xt_helper.c (C) 2002 Harald Welte and cls_layer7.c (C) 2003 Matthew Strait,
++ Ethan Sommer, Justin Levandoski.
++*/
++
++#include <linux/spinlock.h>
++#include <linux/version.h>
++#include <net/ip.h>
++#include <net/tcp.h>
++#include <linux/module.h>
++#include <linux/skbuff.h>
++#include <linux/netfilter.h>
++#include <net/netfilter/nf_conntrack.h>
++#include <net/netfilter/nf_conntrack_core.h>
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)
++#include <net/netfilter/nf_conntrack_extend.h>
++#include <net/netfilter/nf_conntrack_acct.h>
++#endif
++#include <linux/netfilter/x_tables.h>
++#include <linux/netfilter/xt_layer7.h>
++#include <linux/ctype.h>
++#include <linux/proc_fs.h>
++
++#include "regexp/regexp.c"
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Matthew Strait <quadong@users.sf.net>, Ethan Sommer <sommere@users.sf.net>");
++MODULE_DESCRIPTION("iptables application layer match module");
++MODULE_ALIAS("ipt_layer7");
++MODULE_VERSION("2.21");
++
++static int maxdatalen = 2048; // this is the default
++module_param(maxdatalen, int, 0444);
++MODULE_PARM_DESC(maxdatalen, "maximum bytes of data looked at by l7-filter");
++#ifdef CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG
++ #define DPRINTK(format,args...) printk(format,##args)
++#else
++ #define DPRINTK(format,args...)
++#endif
++
++/* Number of packets whose data we look at.
++This can be modified through /proc/net/layer7_numpackets */
++static int num_packets = 10;
++
++static struct pattern_cache {
++ char * regex_string;
++ regexp * pattern;
++ struct pattern_cache * next;
++} * first_pattern_cache = NULL;
++
++DEFINE_SPINLOCK(l7_lock);
++
++static int total_acct_packets(struct nf_conn *ct)
++{
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 26)
++ BUG_ON(ct == NULL);
++ return (ct->counters[IP_CT_DIR_ORIGINAL].packets + ct->counters[IP_CT_DIR_REPLY].packets);
++#else
++ struct nf_conn_counter *acct;
++
++ BUG_ON(ct == NULL);
++ acct = nf_conn_acct_find(ct);
++ if (!acct)
++ return 0;
++ return (atomic64_read(&acct[IP_CT_DIR_ORIGINAL].packets) + atomic64_read(&acct[IP_CT_DIR_REPLY].packets));
++#endif
++}
++
++#ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG
++/* Converts an unfriendly string into a friendly one by
++replacing unprintables with periods and all whitespace with " ". */
++static char * friendly_print(unsigned char * s)
++{
++ char * f = kmalloc(strlen(s) + 1, GFP_ATOMIC);
++ int i;
++
++ if(!f) {
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in "
++ "friendly_print, bailing.\n");
++ return NULL;
++ }
++
++ for(i = 0; i < strlen(s); i++){
++ if(isprint(s[i]) && s[i] < 128) f[i] = s[i];
++ else if(isspace(s[i])) f[i] = ' ';
++ else f[i] = '.';
++ }
++ f[i] = '\0';
++ return f;
++}
++
++static char dec2hex(int i)
++{
++ switch (i) {
++ case 0 ... 9:
++ return (i + '0');
++ break;
++ case 10 ... 15:
++ return (i - 10 + 'a');
++ break;
++ default:
++ if (net_ratelimit())
++ printk("layer7: Problem in dec2hex\n");
++ return '\0';
++ }
++}
++
++static char * hex_print(unsigned char * s)
++{
++ char * g = kmalloc(strlen(s)*3 + 1, GFP_ATOMIC);
++ int i;
++
++ if(!g) {
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in hex_print, "
++ "bailing.\n");
++ return NULL;
++ }
++
++ for(i = 0; i < strlen(s); i++) {
++ g[i*3 ] = dec2hex(s[i]/16);
++ g[i*3 + 1] = dec2hex(s[i]%16);
++ g[i*3 + 2] = ' ';
++ }
++ g[i*3] = '\0';
++
++ return g;
++}
++#endif // DEBUG
++
++/* Use instead of regcomp. As we expect to be seeing the same regexps over and
++over again, it make sense to cache the results. */
++static regexp * compile_and_cache(const char * regex_string,
++ const char * protocol)
++{
++ struct pattern_cache * node = first_pattern_cache;
++ struct pattern_cache * last_pattern_cache = first_pattern_cache;
++ struct pattern_cache * tmp;
++ unsigned int len;
++
++ while (node != NULL) {
++ if (!strcmp(node->regex_string, regex_string))
++ return node->pattern;
++
++ last_pattern_cache = node;/* points at the last non-NULL node */
++ node = node->next;
++ }
++
++ /* If we reach the end of the list, then we have not yet cached
++ the pattern for this regex. Let's do that now.
++ Be paranoid about running out of memory to avoid list corruption. */
++ tmp = kmalloc(sizeof(struct pattern_cache), GFP_ATOMIC);
++
++ if(!tmp) {
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in "
++ "compile_and_cache, bailing.\n");
++ return NULL;
++ }
++
++ tmp->regex_string = kmalloc(strlen(regex_string) + 1, GFP_ATOMIC);
++ tmp->pattern = kmalloc(sizeof(struct regexp), GFP_ATOMIC);
++ tmp->next = NULL;
++
++ if(!tmp->regex_string || !tmp->pattern) {
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in "
++ "compile_and_cache, bailing.\n");
++ kfree(tmp->regex_string);
++ kfree(tmp->pattern);
++ kfree(tmp);
++ return NULL;
++ }
++
++ /* Ok. The new node is all ready now. */
++ node = tmp;
++
++ if(first_pattern_cache == NULL) /* list is empty */
++ first_pattern_cache = node; /* make node the beginning */
++ else
++ last_pattern_cache->next = node; /* attach node to the end */
++
++ /* copy the string and compile the regex */
++ len = strlen(regex_string);
++ DPRINTK("About to compile this: \"%s\"\n", regex_string);
++ node->pattern = regcomp((char *)regex_string, &len);
++ if ( !node->pattern ) {
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: Error compiling regexp "
++ "\"%s\" (%s)\n",
++ regex_string, protocol);
++ /* pattern is now cached as NULL, so we won't try again. */
++ }
++
++ strcpy(node->regex_string, regex_string);
++ return node->pattern;
++}
++
++static int can_handle(const struct sk_buff *skb)
++{
++ if(!ip_hdr(skb)) /* not IP */
++ return 0;
++ if(ip_hdr(skb)->protocol != IPPROTO_TCP &&
++ ip_hdr(skb)->protocol != IPPROTO_UDP &&
++ ip_hdr(skb)->protocol != IPPROTO_ICMP)
++ return 0;
++ return 1;
++}
++
++/* Returns offset the into the skb->data that the application data starts */
++static int app_data_offset(const struct sk_buff *skb)
++{
++ /* In case we are ported somewhere (ebtables?) where ip_hdr(skb)
++ isn't set, this can be gotten from 4*(skb->data[0] & 0x0f) as well. */
++ int ip_hl = 4*ip_hdr(skb)->ihl;
++
++ if( ip_hdr(skb)->protocol == IPPROTO_TCP ) {
++ /* 12 == offset into TCP header for the header length field.
++ Can't get this with skb->h.th->doff because the tcphdr
++ struct doesn't get set when routing (this is confirmed to be
++ true in Netfilter as well as QoS.) */
++ int tcp_hl = 4*(skb->data[ip_hl + 12] >> 4);
++
++ return ip_hl + tcp_hl;
++ } else if( ip_hdr(skb)->protocol == IPPROTO_UDP ) {
++ return ip_hl + 8; /* UDP header is always 8 bytes */
++ } else if( ip_hdr(skb)->protocol == IPPROTO_ICMP ) {
++ return ip_hl + 8; /* ICMP header is 8 bytes */
++ } else {
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: tried to handle unknown "
++ "protocol!\n");
++ return ip_hl + 8; /* something reasonable */
++ }
++}
++
++/* handles whether there's a match when we aren't appending data anymore */
++static int match_no_append(struct nf_conn * conntrack,
++ struct nf_conn * master_conntrack,
++ enum ip_conntrack_info ctinfo,
++ enum ip_conntrack_info master_ctinfo,
++ const struct xt_layer7_info * info)
++{
++ /* If we're in here, throw the app data away */
++ if(master_conntrack->layer7.app_data != NULL) {
++
++ #ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG
++ if(!master_conntrack->layer7.app_proto) {
++ char * f =
++ friendly_print(master_conntrack->layer7.app_data);
++ char * g =
++ hex_print(master_conntrack->layer7.app_data);
++ DPRINTK("\nl7-filter gave up after %d bytes "
++ "(%d packets):\n%s\n",
++ strlen(f), total_acct_packets(master_conntrack), f);
++ kfree(f);
++ DPRINTK("In hex: %s\n", g);
++ kfree(g);
++ }
++ #endif
++
++ kfree(master_conntrack->layer7.app_data);
++ master_conntrack->layer7.app_data = NULL; /* don't free again */
++ }
++
++ if(master_conntrack->layer7.app_proto){
++ /* Here child connections set their .app_proto (for /proc) */
++ if(!conntrack->layer7.app_proto) {
++ conntrack->layer7.app_proto =
++ kmalloc(strlen(master_conntrack->layer7.app_proto)+1,
++ GFP_ATOMIC);
++ if(!conntrack->layer7.app_proto){
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory "
++ "in match_no_append, "
++ "bailing.\n");
++ return 1;
++ }
++ strcpy(conntrack->layer7.app_proto,
++ master_conntrack->layer7.app_proto);
++ }
++
++ return (!strcmp(master_conntrack->layer7.app_proto,
++ info->protocol));
++ }
++ else {
++ /* If not classified, set to "unknown" to distinguish from
++ connections that are still being tested. */
++ master_conntrack->layer7.app_proto =
++ kmalloc(strlen("unknown")+1, GFP_ATOMIC);
++ if(!master_conntrack->layer7.app_proto){
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in "
++ "match_no_append, bailing.\n");
++ return 1;
++ }
++ strcpy(master_conntrack->layer7.app_proto, "unknown");
++ return 0;
++ }
++}
++
++/* add the new app data to the conntrack. Return number of bytes added. */
++static int add_data(struct nf_conn * master_conntrack,
++ char * app_data, int appdatalen)
++{
++ int length = 0, i;
++ int oldlength = master_conntrack->layer7.app_data_len;
++
++ /* This is a fix for a race condition by Deti Fliegl. However, I'm not
++ clear on whether the race condition exists or whether this really
++ fixes it. I might just be being dense... Anyway, if it's not really
++ a fix, all it does is waste a very small amount of time. */
++ if(!master_conntrack->layer7.app_data) return 0;
++
++ /* Strip nulls. Make everything lower case (our regex lib doesn't
++ do case insensitivity). Add it to the end of the current data. */
++ for(i = 0; i < maxdatalen-oldlength-1 &&
++ i < appdatalen; i++) {
++ if(app_data[i] != '\0') {
++ /* the kernel version of tolower mungs 'upper ascii' */
++ master_conntrack->layer7.app_data[length+oldlength] =
++ isascii(app_data[i])?
++ tolower(app_data[i]) : app_data[i];
++ length++;
++ }
++ }
++
++ master_conntrack->layer7.app_data[length+oldlength] = '\0';
++ master_conntrack->layer7.app_data_len = length + oldlength;
++
++ return length;
++}
++
++/* taken from drivers/video/modedb.c */
++static int my_atoi(const char *s)
++{
++ int val = 0;
++
++ for (;; s++) {
++ switch (*s) {
++ case '0'...'9':
++ val = 10*val+(*s-'0');
++ break;
++ default:
++ return val;
++ }
++ }
++}
++
++/* write out num_packets to userland. */
++static int layer7_read_proc(char* page, char ** start, off_t off, int count,
++ int* eof, void * data)
++{
++ if(num_packets > 99 && net_ratelimit())
++ printk(KERN_ERR "layer7: NOT REACHED. num_packets too big\n");
++
++ page[0] = num_packets/10 + '0';
++ page[1] = num_packets%10 + '0';
++ page[2] = '\n';
++ page[3] = '\0';
++
++ *eof=1;
++
++ return 3;
++}
++
++/* Read in num_packets from userland */
++static int layer7_write_proc(struct file* file, const char* buffer,
++ unsigned long count, void *data)
++{
++ char * foo = kmalloc(count, GFP_ATOMIC);
++
++ if(!foo){
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory, bailing. "
++ "num_packets unchanged.\n");
++ return count;
++ }
++
++ if(copy_from_user(foo, buffer, count)) {
++ return -EFAULT;
++ }
++
++
++ num_packets = my_atoi(foo);
++ kfree (foo);
++
++ /* This has an arbitrary limit to make the math easier. I'm lazy.
++ But anyway, 99 is a LOT! If you want more, you're doing it wrong! */
++ if(num_packets > 99) {
++ printk(KERN_WARNING "layer7: num_packets can't be > 99.\n");
++ num_packets = 99;
++ } else if(num_packets < 1) {
++ printk(KERN_WARNING "layer7: num_packets can't be < 1.\n");
++ num_packets = 1;
++ }
++
++ return count;
++}
++
++static bool
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++match(const struct sk_buff *skbin, const struct xt_match_param *par)
++#else
++match(const struct sk_buff *skbin,
++ const struct net_device *in,
++ const struct net_device *out,
++ const struct xt_match *match,
++ const void *matchinfo,
++ int offset,
++ unsigned int protoff,
++ bool *hotdrop)
++#endif
++{
++ /* sidestep const without getting a compiler warning... */
++ struct sk_buff * skb = (struct sk_buff *)skbin;
++
++ const struct xt_layer7_info * info =
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++ par->matchinfo;
++ #else
++ matchinfo;
++ #endif
++
++ enum ip_conntrack_info master_ctinfo, ctinfo;
++ struct nf_conn *master_conntrack, *conntrack;
++ unsigned char * app_data;
++ unsigned int pattern_result, appdatalen;
++ regexp * comppattern;
++
++ /* Be paranoid/incompetent - lock the entire match function. */
++ spin_lock_bh(&l7_lock);
++
++ if(!can_handle(skb)){
++ DPRINTK("layer7: This is some protocol I can't handle.\n");
++ spin_unlock_bh(&l7_lock);
++ return info->invert;
++ }
++
++ /* Treat parent & all its children together as one connection, except
++ for the purpose of setting conntrack->layer7.app_proto in the actual
++ connection. This makes /proc/net/ip_conntrack more satisfying. */
++ if(!(conntrack = nf_ct_get(skb, &ctinfo)) ||
++ !(master_conntrack=nf_ct_get(skb,&master_ctinfo))){
++ DPRINTK("layer7: couldn't get conntrack.\n");
++ spin_unlock_bh(&l7_lock);
++ return info->invert;
++ }
++
++ /* Try to get a master conntrack (and its master etc) for FTP, etc. */
++ while (master_ct(master_conntrack) != NULL)
++ master_conntrack = master_ct(master_conntrack);
++
++ /* if we've classified it or seen too many packets */
++ if(total_acct_packets(master_conntrack) > num_packets ||
++ master_conntrack->layer7.app_proto) {
++
++ pattern_result = match_no_append(conntrack, master_conntrack,
++ ctinfo, master_ctinfo, info);
++
++ /* skb->cb[0] == seen. Don't do things twice if there are
++ multiple l7 rules. I'm not sure that using cb for this purpose
++ is correct, even though it says "put your private variables
++ there". But it doesn't look like it is being used for anything
++ else in the skbs that make it here. */
++ skb->cb[0] = 1; /* marking it seen here's probably irrelevant */
++
++ spin_unlock_bh(&l7_lock);
++ return (pattern_result ^ info->invert);
++ }
++
++ if(skb_is_nonlinear(skb)){
++ if(skb_linearize(skb) != 0){
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: failed to linearize "
++ "packet, bailing.\n");
++ spin_unlock_bh(&l7_lock);
++ return info->invert;
++ }
++ }
++
++ /* now that the skb is linearized, it's safe to set these. */
++ app_data = skb->data + app_data_offset(skb);
++ appdatalen = skb_tail_pointer(skb) - app_data;
++
++ /* the return value gets checked later, when we're ready to use it */
++ comppattern = compile_and_cache(info->pattern, info->protocol);
++
++ /* On the first packet of a connection, allocate space for app data */
++ if(total_acct_packets(master_conntrack) == 1 && !skb->cb[0] &&
++ !master_conntrack->layer7.app_data){
++ master_conntrack->layer7.app_data =
++ kmalloc(maxdatalen, GFP_ATOMIC);
++ if(!master_conntrack->layer7.app_data){
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in "
++ "match, bailing.\n");
++ spin_unlock_bh(&l7_lock);
++ return info->invert;
++ }
++
++ master_conntrack->layer7.app_data[0] = '\0';
++ }
++
++ /* Can be here, but unallocated, if numpackets is increased near
++ the beginning of a connection */
++ if(master_conntrack->layer7.app_data == NULL){
++ spin_unlock_bh(&l7_lock);
++ return info->invert; /* unmatched */
++ }
++
++ if(!skb->cb[0]){
++ int newbytes;
++ newbytes = add_data(master_conntrack, app_data, appdatalen);
++
++ if(newbytes == 0) { /* didn't add any data */
++ skb->cb[0] = 1;
++ /* Didn't match before, not going to match now */
++ spin_unlock_bh(&l7_lock);
++ return info->invert;
++ }
++ }
++
++ /* If looking for "unknown", then never match. "Unknown" means that
++ we've given up; we're still trying with these packets. */
++ if(!strcmp(info->protocol, "unknown")) {
++ pattern_result = 0;
++ /* If looking for "unset", then always match. "Unset" means that we
++ haven't yet classified the connection. */
++ } else if(!strcmp(info->protocol, "unset")) {
++ pattern_result = 2;
++ DPRINTK("layer7: matched unset: not yet classified "
++ "(%d/%d packets)\n",
++ total_acct_packets(master_conntrack), num_packets);
++ /* If the regexp failed to compile, don't bother running it */
++ } else if(comppattern &&
++ regexec(comppattern, master_conntrack->layer7.app_data)){
++ DPRINTK("layer7: matched %s\n", info->protocol);
++ pattern_result = 1;
++ } else pattern_result = 0;
++
++ if(pattern_result == 1) {
++ master_conntrack->layer7.app_proto =
++ kmalloc(strlen(info->protocol)+1, GFP_ATOMIC);
++ if(!master_conntrack->layer7.app_proto){
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in "
++ "match, bailing.\n");
++ spin_unlock_bh(&l7_lock);
++ return (pattern_result ^ info->invert);
++ }
++ strcpy(master_conntrack->layer7.app_proto, info->protocol);
++ } else if(pattern_result > 1) { /* cleanup from "unset" */
++ pattern_result = 1;
++ }
++
++ /* mark the packet seen */
++ skb->cb[0] = 1;
++
++ spin_unlock_bh(&l7_lock);
++ return (pattern_result ^ info->invert);
++}
++
++// load nf_conntrack_ipv4
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++static bool check(const struct xt_mtchk_param *par)
++{
++ if (nf_ct_l3proto_try_module_get(par->match->family) < 0) {
++ printk(KERN_WARNING "can't load conntrack support for "
++ "proto=%d\n", par->match->family);
++#else
++static bool check(const char *tablename, const void *inf,
++ const struct xt_match *match, void *matchinfo,
++ unsigned int hook_mask)
++{
++ if (nf_ct_l3proto_try_module_get(match->family) < 0) {
++ printk(KERN_WARNING "can't load conntrack support for "
++ "proto=%d\n", match->family);
++#endif
++ return 0;
++ }
++ return 1;
++}
++
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++ static void destroy(const struct xt_mtdtor_param *par)
++ {
++ nf_ct_l3proto_module_put(par->match->family);
++ }
++#else
++ static void destroy(const struct xt_match *match, void *matchinfo)
++ {
++ nf_ct_l3proto_module_put(match->family);
++ }
++#endif
++
++static struct xt_match xt_layer7_match[] __read_mostly = {
++{
++ .name = "layer7",
++ .family = AF_INET,
++ .checkentry = check,
++ .match = match,
++ .destroy = destroy,
++ .matchsize = sizeof(struct xt_layer7_info),
++ .me = THIS_MODULE
++}
++};
++
++static void layer7_cleanup_proc(void)
++{
++ remove_proc_entry("layer7_numpackets", init_net.proc_net);
++}
++
++/* register the proc file */
++static void layer7_init_proc(void)
++{
++ struct proc_dir_entry* entry;
++ entry = create_proc_entry("layer7_numpackets", 0644, init_net.proc_net);
++ entry->read_proc = layer7_read_proc;
++ entry->write_proc = layer7_write_proc;
++}
++
++static int __init xt_layer7_init(void)
++{
++ need_conntrack();
++
++ layer7_init_proc();
++ if(maxdatalen < 1) {
++ printk(KERN_WARNING "layer7: maxdatalen can't be < 1, "
++ "using 1\n");
++ maxdatalen = 1;
++ }
++ /* This is not a hard limit. It's just here to prevent people from
++ bringing their slow machines to a grinding halt. */
++ else if(maxdatalen > 65536) {
++ printk(KERN_WARNING "layer7: maxdatalen can't be > 65536, "
++ "using 65536\n");
++ maxdatalen = 65536;
++ }
++ return xt_register_matches(xt_layer7_match,
++ ARRAY_SIZE(xt_layer7_match));
++}
++
++static void __exit xt_layer7_fini(void)
++{
++ layer7_cleanup_proc();
++ xt_unregister_matches(xt_layer7_match, ARRAY_SIZE(xt_layer7_match));
++}
++
++module_init(xt_layer7_init);
++module_exit(xt_layer7_fini);
+--- /dev/null
++++ b/net/netfilter/regexp/regexp.c
+@@ -0,0 +1,1197 @@
++/*
++ * regcomp and regexec -- regsub and regerror are elsewhere
++ * @(#)regexp.c 1.3 of 18 April 87
++ *
++ * Copyright (c) 1986 by University of Toronto.
++ * Written by Henry Spencer. Not derived from licensed software.
++ *
++ * Permission is granted to anyone to use this software for any
++ * purpose on any computer system, and to redistribute it freely,
++ * subject to the following restrictions:
++ *
++ * 1. The author is not responsible for the consequences of use of
++ * this software, no matter how awful, even if they arise
++ * from defects in it.
++ *
++ * 2. The origin of this software must not be misrepresented, either
++ * by explicit claim or by omission.
++ *
++ * 3. Altered versions must be plainly marked as such, and must not
++ * be misrepresented as being the original software.
++ *
++ * Beware that some of this code is subtly aware of the way operator
++ * precedence is structured in regular expressions. Serious changes in
++ * regular-expression syntax might require a total rethink.
++ *
++ * This code was modified by Ethan Sommer to work within the kernel
++ * (it now uses kmalloc etc..)
++ *
++ * Modified slightly by Matthew Strait to use more modern C.
++ */
++
++#include "regexp.h"
++#include "regmagic.h"
++
++/* added by ethan and matt. Lets it work in both kernel and user space.
++(So iptables can use it, for instance.) Yea, it goes both ways... */
++#if __KERNEL__
++ #define malloc(foo) kmalloc(foo,GFP_ATOMIC)
++#else
++ #define printk(format,args...) printf(format,##args)
++#endif
++
++void regerror(char * s)
++{
++ printk("<3>Regexp: %s\n", s);
++ /* NOTREACHED */
++}
++
++/*
++ * The "internal use only" fields in regexp.h are present to pass info from
++ * compile to execute that permits the execute phase to run lots faster on
++ * simple cases. They are:
++ *
++ * regstart char that must begin a match; '\0' if none obvious
++ * reganch is the match anchored (at beginning-of-line only)?
++ * regmust string (pointer into program) that match must include, or NULL
++ * regmlen length of regmust string
++ *
++ * Regstart and reganch permit very fast decisions on suitable starting points
++ * for a match, cutting down the work a lot. Regmust permits fast rejection
++ * of lines that cannot possibly match. The regmust tests are costly enough
++ * that regcomp() supplies a regmust only if the r.e. contains something
++ * potentially expensive (at present, the only such thing detected is * or +
++ * at the start of the r.e., which can involve a lot of backup). Regmlen is
++ * supplied because the test in regexec() needs it and regcomp() is computing
++ * it anyway.
++ */
++
++/*
++ * Structure for regexp "program". This is essentially a linear encoding
++ * of a nondeterministic finite-state machine (aka syntax charts or
++ * "railroad normal form" in parsing technology). Each node is an opcode
++ * plus a "next" pointer, possibly plus an operand. "Next" pointers of
++ * all nodes except BRANCH implement concatenation; a "next" pointer with
++ * a BRANCH on both ends of it is connecting two alternatives. (Here we
++ * have one of the subtle syntax dependencies: an individual BRANCH (as
++ * opposed to a collection of them) is never concatenated with anything
++ * because of operator precedence.) The operand of some types of node is
++ * a literal string; for others, it is a node leading into a sub-FSM. In
++ * particular, the operand of a BRANCH node is the first node of the branch.
++ * (NB this is *not* a tree structure: the tail of the branch connects
++ * to the thing following the set of BRANCHes.) The opcodes are:
++ */
++
++/* definition number opnd? meaning */
++#define END 0 /* no End of program. */
++#define BOL 1 /* no Match "" at beginning of line. */
++#define EOL 2 /* no Match "" at end of line. */
++#define ANY 3 /* no Match any one character. */
++#define ANYOF 4 /* str Match any character in this string. */
++#define ANYBUT 5 /* str Match any character not in this string. */
++#define BRANCH 6 /* node Match this alternative, or the next... */
++#define BACK 7 /* no Match "", "next" ptr points backward. */
++#define EXACTLY 8 /* str Match this string. */
++#define NOTHING 9 /* no Match empty string. */
++#define STAR 10 /* node Match this (simple) thing 0 or more times. */
++#define PLUS 11 /* node Match this (simple) thing 1 or more times. */
++#define OPEN 20 /* no Mark this point in input as start of #n. */
++ /* OPEN+1 is number 1, etc. */
++#define CLOSE 30 /* no Analogous to OPEN. */
++
++/*
++ * Opcode notes:
++ *
++ * BRANCH The set of branches constituting a single choice are hooked
++ * together with their "next" pointers, since precedence prevents
++ * anything being concatenated to any individual branch. The
++ * "next" pointer of the last BRANCH in a choice points to the
++ * thing following the whole choice. This is also where the
++ * final "next" pointer of each individual branch points; each
++ * branch starts with the operand node of a BRANCH node.
++ *
++ * BACK Normal "next" pointers all implicitly point forward; BACK
++ * exists to make loop structures possible.
++ *
++ * STAR,PLUS '?', and complex '*' and '+', are implemented as circular
++ * BRANCH structures using BACK. Simple cases (one character
++ * per match) are implemented with STAR and PLUS for speed
++ * and to minimize recursive plunges.
++ *
++ * OPEN,CLOSE ...are numbered at compile time.
++ */
++
++/*
++ * A node is one char of opcode followed by two chars of "next" pointer.
++ * "Next" pointers are stored as two 8-bit pieces, high order first. The
++ * value is a positive offset from the opcode of the node containing it.
++ * An operand, if any, simply follows the node. (Note that much of the
++ * code generation knows about this implicit relationship.)
++ *
++ * Using two bytes for the "next" pointer is vast overkill for most things,
++ * but allows patterns to get big without disasters.
++ */
++#define OP(p) (*(p))
++#define NEXT(p) (((*((p)+1)&0377)<<8) + (*((p)+2)&0377))
++#define OPERAND(p) ((p) + 3)
++
++/*
++ * See regmagic.h for one further detail of program structure.
++ */
++
++
++/*
++ * Utility definitions.
++ */
++#ifndef CHARBITS
++#define UCHARAT(p) ((int)*(unsigned char *)(p))
++#else
++#define UCHARAT(p) ((int)*(p)&CHARBITS)
++#endif
++
++#define FAIL(m) { regerror(m); return(NULL); }
++#define ISMULT(c) ((c) == '*' || (c) == '+' || (c) == '?')
++#define META "^$.[()|?+*\\"
++
++/*
++ * Flags to be passed up and down.
++ */
++#define HASWIDTH 01 /* Known never to match null string. */
++#define SIMPLE 02 /* Simple enough to be STAR/PLUS operand. */
++#define SPSTART 04 /* Starts with * or +. */
++#define WORST 0 /* Worst case. */
++
++/*
++ * Global work variables for regcomp().
++ */
++struct match_globals {
++char *reginput; /* String-input pointer. */
++char *regbol; /* Beginning of input, for ^ check. */
++char **regstartp; /* Pointer to startp array. */
++char **regendp; /* Ditto for endp. */
++char *regparse; /* Input-scan pointer. */
++int regnpar; /* () count. */
++char regdummy;
++char *regcode; /* Code-emit pointer; ®dummy = don't. */
++long regsize; /* Code size. */
++};
++
++/*
++ * Forward declarations for regcomp()'s friends.
++ */
++#ifndef STATIC
++#define STATIC static
++#endif
++STATIC char *reg(struct match_globals *g, int paren,int *flagp);
++STATIC char *regbranch(struct match_globals *g, int *flagp);
++STATIC char *regpiece(struct match_globals *g, int *flagp);
++STATIC char *regatom(struct match_globals *g, int *flagp);
++STATIC char *regnode(struct match_globals *g, char op);
++STATIC char *regnext(struct match_globals *g, char *p);
++STATIC void regc(struct match_globals *g, char b);
++STATIC void reginsert(struct match_globals *g, char op, char *opnd);
++STATIC void regtail(struct match_globals *g, char *p, char *val);
++STATIC void regoptail(struct match_globals *g, char *p, char *val);
++
++
++__kernel_size_t my_strcspn(const char *s1,const char *s2)
++{
++ char *scan1;
++ char *scan2;
++ int count;
++
++ count = 0;
++ for (scan1 = (char *)s1; *scan1 != '\0'; scan1++) {
++ for (scan2 = (char *)s2; *scan2 != '\0';) /* ++ moved down. */
++ if (*scan1 == *scan2++)
++ return(count);
++ count++;
++ }
++ return(count);
++}
++
++/*
++ - regcomp - compile a regular expression into internal code
++ *
++ * We can't allocate space until we know how big the compiled form will be,
++ * but we can't compile it (and thus know how big it is) until we've got a
++ * place to put the code. So we cheat: we compile it twice, once with code
++ * generation turned off and size counting turned on, and once "for real".
++ * This also means that we don't allocate space until we are sure that the
++ * thing really will compile successfully, and we never have to move the
++ * code and thus invalidate pointers into it. (Note that it has to be in
++ * one piece because free() must be able to free it all.)
++ *
++ * Beware that the optimization-preparation code in here knows about some
++ * of the structure of the compiled regexp.
++ */
++regexp *
++regcomp(char *exp,int *patternsize)
++{
++ register regexp *r;
++ register char *scan;
++ register char *longest;
++ register int len;
++ int flags;
++ struct match_globals g;
++
++ /* commented out by ethan
++ extern char *malloc();
++ */
++
++ if (exp == NULL)
++ FAIL("NULL argument");
++
++ /* First pass: determine size, legality. */
++ g.regparse = exp;
++ g.regnpar = 1;
++ g.regsize = 0L;
++ g.regcode = &g.regdummy;
++ regc(&g, MAGIC);
++ if (reg(&g, 0, &flags) == NULL)
++ return(NULL);
++
++ /* Small enough for pointer-storage convention? */
++ if (g.regsize >= 32767L) /* Probably could be 65535L. */
++ FAIL("regexp too big");
++
++ /* Allocate space. */
++ *patternsize=sizeof(regexp) + (unsigned)g.regsize;
++ r = (regexp *)malloc(sizeof(regexp) + (unsigned)g.regsize);
++ if (r == NULL)
++ FAIL("out of space");
++
++ /* Second pass: emit code. */
++ g.regparse = exp;
++ g.regnpar = 1;
++ g.regcode = r->program;
++ regc(&g, MAGIC);
++ if (reg(&g, 0, &flags) == NULL)
++ return(NULL);
++
++ /* Dig out information for optimizations. */
++ r->regstart = '\0'; /* Worst-case defaults. */
++ r->reganch = 0;
++ r->regmust = NULL;
++ r->regmlen = 0;
++ scan = r->program+1; /* First BRANCH. */
++ if (OP(regnext(&g, scan)) == END) { /* Only one top-level choice. */
++ scan = OPERAND(scan);
++
++ /* Starting-point info. */
++ if (OP(scan) == EXACTLY)
++ r->regstart = *OPERAND(scan);
++ else if (OP(scan) == BOL)
++ r->reganch++;
++
++ /*
++ * If there's something expensive in the r.e., find the
++ * longest literal string that must appear and make it the
++ * regmust. Resolve ties in favor of later strings, since
++ * the regstart check works with the beginning of the r.e.
++ * and avoiding duplication strengthens checking. Not a
++ * strong reason, but sufficient in the absence of others.
++ */
++ if (flags&SPSTART) {
++ longest = NULL;
++ len = 0;
++ for (; scan != NULL; scan = regnext(&g, scan))
++ if (OP(scan) == EXACTLY && strlen(OPERAND(scan)) >= len) {
++ longest = OPERAND(scan);
++ len = strlen(OPERAND(scan));
++ }
++ r->regmust = longest;
++ r->regmlen = len;
++ }
++ }
++
++ return(r);
++}
++
++/*
++ - reg - regular expression, i.e. main body or parenthesized thing
++ *
++ * Caller must absorb opening parenthesis.
++ *
++ * Combining parenthesis handling with the base level of regular expression
++ * is a trifle forced, but the need to tie the tails of the branches to what
++ * follows makes it hard to avoid.
++ */
++static char *
++reg(struct match_globals *g, int paren, int *flagp /* Parenthesized? */ )
++{
++ register char *ret;
++ register char *br;
++ register char *ender;
++ register int parno = 0; /* 0 makes gcc happy */
++ int flags;
++
++ *flagp = HASWIDTH; /* Tentatively. */
++
++ /* Make an OPEN node, if parenthesized. */
++ if (paren) {
++ if (g->regnpar >= NSUBEXP)
++ FAIL("too many ()");
++ parno = g->regnpar;
++ g->regnpar++;
++ ret = regnode(g, OPEN+parno);
++ } else
++ ret = NULL;
++
++ /* Pick up the branches, linking them together. */
++ br = regbranch(g, &flags);
++ if (br == NULL)
++ return(NULL);
++ if (ret != NULL)
++ regtail(g, ret, br); /* OPEN -> first. */
++ else
++ ret = br;
++ if (!(flags&HASWIDTH))
++ *flagp &= ~HASWIDTH;
++ *flagp |= flags&SPSTART;
++ while (*g->regparse == '|') {
++ g->regparse++;
++ br = regbranch(g, &flags);
++ if (br == NULL)
++ return(NULL);
++ regtail(g, ret, br); /* BRANCH -> BRANCH. */
++ if (!(flags&HASWIDTH))
++ *flagp &= ~HASWIDTH;
++ *flagp |= flags&SPSTART;
++ }
++
++ /* Make a closing node, and hook it on the end. */
++ ender = regnode(g, (paren) ? CLOSE+parno : END);
++ regtail(g, ret, ender);
++
++ /* Hook the tails of the branches to the closing node. */
++ for (br = ret; br != NULL; br = regnext(g, br))
++ regoptail(g, br, ender);
++
++ /* Check for proper termination. */
++ if (paren && *g->regparse++ != ')') {
++ FAIL("unmatched ()");
++ } else if (!paren && *g->regparse != '\0') {
++ if (*g->regparse == ')') {
++ FAIL("unmatched ()");
++ } else
++ FAIL("junk on end"); /* "Can't happen". */
++ /* NOTREACHED */
++ }
++
++ return(ret);
++}
++
++/*
++ - regbranch - one alternative of an | operator
++ *
++ * Implements the concatenation operator.
++ */
++static char *
++regbranch(struct match_globals *g, int *flagp)
++{
++ register char *ret;
++ register char *chain;
++ register char *latest;
++ int flags;
++
++ *flagp = WORST; /* Tentatively. */
++
++ ret = regnode(g, BRANCH);
++ chain = NULL;
++ while (*g->regparse != '\0' && *g->regparse != '|' && *g->regparse != ')') {
++ latest = regpiece(g, &flags);
++ if (latest == NULL)
++ return(NULL);
++ *flagp |= flags&HASWIDTH;
++ if (chain == NULL) /* First piece. */
++ *flagp |= flags&SPSTART;
++ else
++ regtail(g, chain, latest);
++ chain = latest;
++ }
++ if (chain == NULL) /* Loop ran zero times. */
++ (void) regnode(g, NOTHING);
++
++ return(ret);
++}
++
++/*
++ - regpiece - something followed by possible [*+?]
++ *
++ * Note that the branching code sequences used for ? and the general cases
++ * of * and + are somewhat optimized: they use the same NOTHING node as
++ * both the endmarker for their branch list and the body of the last branch.
++ * It might seem that this node could be dispensed with entirely, but the
++ * endmarker role is not redundant.
++ */
++static char *
++regpiece(struct match_globals *g, int *flagp)
++{
++ register char *ret;
++ register char op;
++ register char *next;
++ int flags;
++
++ ret = regatom(g, &flags);
++ if (ret == NULL)
++ return(NULL);
++
++ op = *g->regparse;
++ if (!ISMULT(op)) {
++ *flagp = flags;
++ return(ret);
++ }
++
++ if (!(flags&HASWIDTH) && op != '?')
++ FAIL("*+ operand could be empty");
++ *flagp = (op != '+') ? (WORST|SPSTART) : (WORST|HASWIDTH);
++
++ if (op == '*' && (flags&SIMPLE))
++ reginsert(g, STAR, ret);
++ else if (op == '*') {
++ /* Emit x* as (x&|), where & means "self". */
++ reginsert(g, BRANCH, ret); /* Either x */
++ regoptail(g, ret, regnode(g, BACK)); /* and loop */
++ regoptail(g, ret, ret); /* back */
++ regtail(g, ret, regnode(g, BRANCH)); /* or */
++ regtail(g, ret, regnode(g, NOTHING)); /* null. */
++ } else if (op == '+' && (flags&SIMPLE))
++ reginsert(g, PLUS, ret);
++ else if (op == '+') {
++ /* Emit x+ as x(&|), where & means "self". */
++ next = regnode(g, BRANCH); /* Either */
++ regtail(g, ret, next);
++ regtail(g, regnode(g, BACK), ret); /* loop back */
++ regtail(g, next, regnode(g, BRANCH)); /* or */
++ regtail(g, ret, regnode(g, NOTHING)); /* null. */
++ } else if (op == '?') {
++ /* Emit x? as (x|) */
++ reginsert(g, BRANCH, ret); /* Either x */
++ regtail(g, ret, regnode(g, BRANCH)); /* or */
++ next = regnode(g, NOTHING); /* null. */
++ regtail(g, ret, next);
++ regoptail(g, ret, next);
++ }
++ g->regparse++;
++ if (ISMULT(*g->regparse))
++ FAIL("nested *?+");
++
++ return(ret);
++}
++
++/*
++ - regatom - the lowest level
++ *
++ * Optimization: gobbles an entire sequence of ordinary characters so that
++ * it can turn them into a single node, which is smaller to store and
++ * faster to run. Backslashed characters are exceptions, each becoming a
++ * separate node; the code is simpler that way and it's not worth fixing.
++ */
++static char *
++regatom(struct match_globals *g, int *flagp)
++{
++ register char *ret;
++ int flags;
++
++ *flagp = WORST; /* Tentatively. */
++
++ switch (*g->regparse++) {
++ case '^':
++ ret = regnode(g, BOL);
++ break;
++ case '$':
++ ret = regnode(g, EOL);
++ break;
++ case '.':
++ ret = regnode(g, ANY);
++ *flagp |= HASWIDTH|SIMPLE;
++ break;
++ case '[': {
++ register int class;
++ register int classend;
++
++ if (*g->regparse == '^') { /* Complement of range. */
++ ret = regnode(g, ANYBUT);
++ g->regparse++;
++ } else
++ ret = regnode(g, ANYOF);
++ if (*g->regparse == ']' || *g->regparse == '-')
++ regc(g, *g->regparse++);
++ while (*g->regparse != '\0' && *g->regparse != ']') {
++ if (*g->regparse == '-') {
++ g->regparse++;
++ if (*g->regparse == ']' || *g->regparse == '\0')
++ regc(g, '-');
++ else {
++ class = UCHARAT(g->regparse-2)+1;
++ classend = UCHARAT(g->regparse);
++ if (class > classend+1)
++ FAIL("invalid [] range");
++ for (; class <= classend; class++)
++ regc(g, class);
++ g->regparse++;
++ }
++ } else
++ regc(g, *g->regparse++);
++ }
++ regc(g, '\0');
++ if (*g->regparse != ']')
++ FAIL("unmatched []");
++ g->regparse++;
++ *flagp |= HASWIDTH|SIMPLE;
++ }
++ break;
++ case '(':
++ ret = reg(g, 1, &flags);
++ if (ret == NULL)
++ return(NULL);
++ *flagp |= flags&(HASWIDTH|SPSTART);
++ break;
++ case '\0':
++ case '|':
++ case ')':
++ FAIL("internal urp"); /* Supposed to be caught earlier. */
++ break;
++ case '?':
++ case '+':
++ case '*':
++ FAIL("?+* follows nothing");
++ break;
++ case '\\':
++ if (*g->regparse == '\0')
++ FAIL("trailing \\");
++ ret = regnode(g, EXACTLY);
++ regc(g, *g->regparse++);
++ regc(g, '\0');
++ *flagp |= HASWIDTH|SIMPLE;
++ break;
++ default: {
++ register int len;
++ register char ender;
++
++ g->regparse--;
++ len = my_strcspn((const char *)g->regparse, (const char *)META);
++ if (len <= 0)
++ FAIL("internal disaster");
++ ender = *(g->regparse+len);
++ if (len > 1 && ISMULT(ender))
++ len--; /* Back off clear of ?+* operand. */
++ *flagp |= HASWIDTH;
++ if (len == 1)
++ *flagp |= SIMPLE;
++ ret = regnode(g, EXACTLY);
++ while (len > 0) {
++ regc(g, *g->regparse++);
++ len--;
++ }
++ regc(g, '\0');
++ }
++ break;
++ }
++
++ return(ret);
++}
++
++/*
++ - regnode - emit a node
++ */
++static char * /* Location. */
++regnode(struct match_globals *g, char op)
++{
++ register char *ret;
++ register char *ptr;
++
++ ret = g->regcode;
++ if (ret == &g->regdummy) {
++ g->regsize += 3;
++ return(ret);
++ }
++
++ ptr = ret;
++ *ptr++ = op;
++ *ptr++ = '\0'; /* Null "next" pointer. */
++ *ptr++ = '\0';
++ g->regcode = ptr;
++
++ return(ret);
++}
++
++/*
++ - regc - emit (if appropriate) a byte of code
++ */
++static void
++regc(struct match_globals *g, char b)
++{
++ if (g->regcode != &g->regdummy)
++ *g->regcode++ = b;
++ else
++ g->regsize++;
++}
++
++/*
++ - reginsert - insert an operator in front of already-emitted operand
++ *
++ * Means relocating the operand.
++ */
++static void
++reginsert(struct match_globals *g, char op, char* opnd)
++{
++ register char *src;
++ register char *dst;
++ register char *place;
++
++ if (g->regcode == &g->regdummy) {
++ g->regsize += 3;
++ return;
++ }
++
++ src = g->regcode;
++ g->regcode += 3;
++ dst = g->regcode;
++ while (src > opnd)
++ *--dst = *--src;
++
++ place = opnd; /* Op node, where operand used to be. */
++ *place++ = op;
++ *place++ = '\0';
++ *place++ = '\0';
++}
++
++/*
++ - regtail - set the next-pointer at the end of a node chain
++ */
++static void
++regtail(struct match_globals *g, char *p, char *val)
++{
++ register char *scan;
++ register char *temp;
++ register int offset;
++
++ if (p == &g->regdummy)
++ return;
++
++ /* Find last node. */
++ scan = p;
++ for (;;) {
++ temp = regnext(g, scan);
++ if (temp == NULL)
++ break;
++ scan = temp;
++ }
++
++ if (OP(scan) == BACK)
++ offset = scan - val;
++ else
++ offset = val - scan;
++ *(scan+1) = (offset>>8)&0377;
++ *(scan+2) = offset&0377;
++}
++
++/*
++ - regoptail - regtail on operand of first argument; nop if operandless
++ */
++static void
++regoptail(struct match_globals *g, char *p, char *val)
++{
++ /* "Operandless" and "op != BRANCH" are synonymous in practice. */
++ if (p == NULL || p == &g->regdummy || OP(p) != BRANCH)
++ return;
++ regtail(g, OPERAND(p), val);
++}
++
++/*
++ * regexec and friends
++ */
++
++
++/*
++ * Forwards.
++ */
++STATIC int regtry(struct match_globals *g, regexp *prog, char *string);
++STATIC int regmatch(struct match_globals *g, char *prog);
++STATIC int regrepeat(struct match_globals *g, char *p);
++
++#ifdef DEBUG
++int regnarrate = 0;
++void regdump();
++STATIC char *regprop(char *op);
++#endif
++
++/*
++ - regexec - match a regexp against a string
++ */
++int
++regexec(regexp *prog, char *string)
++{
++ register char *s;
++ struct match_globals g;
++
++ /* Be paranoid... */
++ if (prog == NULL || string == NULL) {
++ printk("<3>Regexp: NULL parameter\n");
++ return(0);
++ }
++
++ /* Check validity of program. */
++ if (UCHARAT(prog->program) != MAGIC) {
++ printk("<3>Regexp: corrupted program\n");
++ return(0);
++ }
++
++ /* If there is a "must appear" string, look for it. */
++ if (prog->regmust != NULL) {
++ s = string;
++ while ((s = strchr(s, prog->regmust[0])) != NULL) {
++ if (strncmp(s, prog->regmust, prog->regmlen) == 0)
++ break; /* Found it. */
++ s++;
++ }
++ if (s == NULL) /* Not present. */
++ return(0);
++ }
++
++ /* Mark beginning of line for ^ . */
++ g.regbol = string;
++
++ /* Simplest case: anchored match need be tried only once. */
++ if (prog->reganch)
++ return(regtry(&g, prog, string));
++
++ /* Messy cases: unanchored match. */
++ s = string;
++ if (prog->regstart != '\0')
++ /* We know what char it must start with. */
++ while ((s = strchr(s, prog->regstart)) != NULL) {
++ if (regtry(&g, prog, s))
++ return(1);
++ s++;
++ }
++ else
++ /* We don't -- general case. */
++ do {
++ if (regtry(&g, prog, s))
++ return(1);
++ } while (*s++ != '\0');
++
++ /* Failure. */
++ return(0);
++}
++
++/*
++ - regtry - try match at specific point
++ */
++static int /* 0 failure, 1 success */
++regtry(struct match_globals *g, regexp *prog, char *string)
++{
++ register int i;
++ register char **sp;
++ register char **ep;
++
++ g->reginput = string;
++ g->regstartp = prog->startp;
++ g->regendp = prog->endp;
++
++ sp = prog->startp;
++ ep = prog->endp;
++ for (i = NSUBEXP; i > 0; i--) {
++ *sp++ = NULL;
++ *ep++ = NULL;
++ }
++ if (regmatch(g, prog->program + 1)) {
++ prog->startp[0] = string;
++ prog->endp[0] = g->reginput;
++ return(1);
++ } else
++ return(0);
++}
++
++/*
++ - regmatch - main matching routine
++ *
++ * Conceptually the strategy is simple: check to see whether the current
++ * node matches, call self recursively to see whether the rest matches,
++ * and then act accordingly. In practice we make some effort to avoid
++ * recursion, in particular by going through "ordinary" nodes (that don't
++ * need to know whether the rest of the match failed) by a loop instead of
++ * by recursion.
++ */
++static int /* 0 failure, 1 success */
++regmatch(struct match_globals *g, char *prog)
++{
++ register char *scan = prog; /* Current node. */
++ char *next; /* Next node. */
++
++#ifdef DEBUG
++ if (scan != NULL && regnarrate)
++ fprintf(stderr, "%s(\n", regprop(scan));
++#endif
++ while (scan != NULL) {
++#ifdef DEBUG
++ if (regnarrate)
++ fprintf(stderr, "%s...\n", regprop(scan));
++#endif
++ next = regnext(g, scan);
++
++ switch (OP(scan)) {
++ case BOL:
++ if (g->reginput != g->regbol)
++ return(0);
++ break;
++ case EOL:
++ if (*g->reginput != '\0')
++ return(0);
++ break;
++ case ANY:
++ if (*g->reginput == '\0')
++ return(0);
++ g->reginput++;
++ break;
++ case EXACTLY: {
++ register int len;
++ register char *opnd;
++
++ opnd = OPERAND(scan);
++ /* Inline the first character, for speed. */
++ if (*opnd != *g->reginput)
++ return(0);
++ len = strlen(opnd);
++ if (len > 1 && strncmp(opnd, g->reginput, len) != 0)
++ return(0);
++ g->reginput += len;
++ }
++ break;
++ case ANYOF:
++ if (*g->reginput == '\0' || strchr(OPERAND(scan), *g->reginput) == NULL)
++ return(0);
++ g->reginput++;
++ break;
++ case ANYBUT:
++ if (*g->reginput == '\0' || strchr(OPERAND(scan), *g->reginput) != NULL)
++ return(0);
++ g->reginput++;
++ break;
++ case NOTHING:
++ case BACK:
++ break;
++ case OPEN+1:
++ case OPEN+2:
++ case OPEN+3:
++ case OPEN+4:
++ case OPEN+5:
++ case OPEN+6:
++ case OPEN+7:
++ case OPEN+8:
++ case OPEN+9: {
++ register int no;
++ register char *save;
++
++ no = OP(scan) - OPEN;
++ save = g->reginput;
++
++ if (regmatch(g, next)) {
++ /*
++ * Don't set startp if some later
++ * invocation of the same parentheses
++ * already has.
++ */
++ if (g->regstartp[no] == NULL)
++ g->regstartp[no] = save;
++ return(1);
++ } else
++ return(0);
++ }
++ break;
++ case CLOSE+1:
++ case CLOSE+2:
++ case CLOSE+3:
++ case CLOSE+4:
++ case CLOSE+5:
++ case CLOSE+6:
++ case CLOSE+7:
++ case CLOSE+8:
++ case CLOSE+9:
++ {
++ register int no;
++ register char *save;
++
++ no = OP(scan) - CLOSE;
++ save = g->reginput;
++
++ if (regmatch(g, next)) {
++ /*
++ * Don't set endp if some later
++ * invocation of the same parentheses
++ * already has.
++ */
++ if (g->regendp[no] == NULL)
++ g->regendp[no] = save;
++ return(1);
++ } else
++ return(0);
++ }
++ break;
++ case BRANCH: {
++ register char *save;
++
++ if (OP(next) != BRANCH) /* No choice. */
++ next = OPERAND(scan); /* Avoid recursion. */
++ else {
++ do {
++ save = g->reginput;
++ if (regmatch(g, OPERAND(scan)))
++ return(1);
++ g->reginput = save;
++ scan = regnext(g, scan);
++ } while (scan != NULL && OP(scan) == BRANCH);
++ return(0);
++ /* NOTREACHED */
++ }
++ }
++ break;
++ case STAR:
++ case PLUS: {
++ register char nextch;
++ register int no;
++ register char *save;
++ register int min;
++
++ /*
++ * Lookahead to avoid useless match attempts
++ * when we know what character comes next.
++ */
++ nextch = '\0';
++ if (OP(next) == EXACTLY)
++ nextch = *OPERAND(next);
++ min = (OP(scan) == STAR) ? 0 : 1;
++ save = g->reginput;
++ no = regrepeat(g, OPERAND(scan));
++ while (no >= min) {
++ /* If it could work, try it. */
++ if (nextch == '\0' || *g->reginput == nextch)
++ if (regmatch(g, next))
++ return(1);
++ /* Couldn't or didn't -- back up. */
++ no--;
++ g->reginput = save + no;
++ }
++ return(0);
++ }
++ break;
++ case END:
++ return(1); /* Success! */
++ break;
++ default:
++ printk("<3>Regexp: memory corruption\n");
++ return(0);
++ break;
++ }
++
++ scan = next;
++ }
++
++ /*
++ * We get here only if there's trouble -- normally "case END" is
++ * the terminating point.
++ */
++ printk("<3>Regexp: corrupted pointers\n");
++ return(0);
++}
++
++/*
++ - regrepeat - repeatedly match something simple, report how many
++ */
++static int
++regrepeat(struct match_globals *g, char *p)
++{
++ register int count = 0;
++ register char *scan;
++ register char *opnd;
++
++ scan = g->reginput;
++ opnd = OPERAND(p);
++ switch (OP(p)) {
++ case ANY:
++ count = strlen(scan);
++ scan += count;
++ break;
++ case EXACTLY:
++ while (*opnd == *scan) {
++ count++;
++ scan++;
++ }
++ break;
++ case ANYOF:
++ while (*scan != '\0' && strchr(opnd, *scan) != NULL) {
++ count++;
++ scan++;
++ }
++ break;
++ case ANYBUT:
++ while (*scan != '\0' && strchr(opnd, *scan) == NULL) {
++ count++;
++ scan++;
++ }
++ break;
++ default: /* Oh dear. Called inappropriately. */
++ printk("<3>Regexp: internal foulup\n");
++ count = 0; /* Best compromise. */
++ break;
++ }
++ g->reginput = scan;
++
++ return(count);
++}
++
++/*
++ - regnext - dig the "next" pointer out of a node
++ */
++static char*
++regnext(struct match_globals *g, char *p)
++{
++ register int offset;
++
++ if (p == &g->regdummy)
++ return(NULL);
++
++ offset = NEXT(p);
++ if (offset == 0)
++ return(NULL);
++
++ if (OP(p) == BACK)
++ return(p-offset);
++ else
++ return(p+offset);
++}
++
++#ifdef DEBUG
++
++STATIC char *regprop();
++
++/*
++ - regdump - dump a regexp onto stdout in vaguely comprehensible form
++ */
++void
++regdump(regexp *r)
++{
++ register char *s;
++ register char op = EXACTLY; /* Arbitrary non-END op. */
++ register char *next;
++ /* extern char *strchr(); */
++
++
++ s = r->program + 1;
++ while (op != END) { /* While that wasn't END last time... */
++ op = OP(s);
++ printf("%2d%s", s-r->program, regprop(s)); /* Where, what. */
++ next = regnext(s);
++ if (next == NULL) /* Next ptr. */
++ printf("(0)");
++ else
++ printf("(%d)", (s-r->program)+(next-s));
++ s += 3;
++ if (op == ANYOF || op == ANYBUT || op == EXACTLY) {
++ /* Literal string, where present. */
++ while (*s != '\0') {
++ putchar(*s);
++ s++;
++ }
++ s++;
++ }
++ putchar('\n');
++ }
++
++ /* Header fields of interest. */
++ if (r->regstart != '\0')
++ printf("start `%c' ", r->regstart);
++ if (r->reganch)
++ printf("anchored ");
++ if (r->regmust != NULL)
++ printf("must have \"%s\"", r->regmust);
++ printf("\n");
++}
++
++/*
++ - regprop - printable representation of opcode
++ */
++static char *
++regprop(char *op)
++{
++#define BUFLEN 50
++ register char *p;
++ static char buf[BUFLEN];
++
++ strcpy(buf, ":");
++
++ switch (OP(op)) {
++ case BOL:
++ p = "BOL";
++ break;
++ case EOL:
++ p = "EOL";
++ break;
++ case ANY:
++ p = "ANY";
++ break;
++ case ANYOF:
++ p = "ANYOF";
++ break;
++ case ANYBUT:
++ p = "ANYBUT";
++ break;
++ case BRANCH:
++ p = "BRANCH";
++ break;
++ case EXACTLY:
++ p = "EXACTLY";
++ break;
++ case NOTHING:
++ p = "NOTHING";
++ break;
++ case BACK:
++ p = "BACK";
++ break;
++ case END:
++ p = "END";
++ break;
++ case OPEN+1:
++ case OPEN+2:
++ case OPEN+3:
++ case OPEN+4:
++ case OPEN+5:
++ case OPEN+6:
++ case OPEN+7:
++ case OPEN+8:
++ case OPEN+9:
++ snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "OPEN%d", OP(op)-OPEN);
++ p = NULL;
++ break;
++ case CLOSE+1:
++ case CLOSE+2:
++ case CLOSE+3:
++ case CLOSE+4:
++ case CLOSE+5:
++ case CLOSE+6:
++ case CLOSE+7:
++ case CLOSE+8:
++ case CLOSE+9:
++ snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "CLOSE%d", OP(op)-CLOSE);
++ p = NULL;
++ break;
++ case STAR:
++ p = "STAR";
++ break;
++ case PLUS:
++ p = "PLUS";
++ break;
++ default:
++ printk("<3>Regexp: corrupted opcode\n");
++ break;
++ }
++ if (p != NULL)
++ strncat(buf, p, BUFLEN-strlen(buf));
++ return(buf);
++}
++#endif
++
++
+--- /dev/null
++++ b/net/netfilter/regexp/regexp.h
+@@ -0,0 +1,41 @@
++/*
++ * Definitions etc. for regexp(3) routines.
++ *
++ * Caveat: this is V8 regexp(3) [actually, a reimplementation thereof],
++ * not the System V one.
++ */
++
++#ifndef REGEXP_H
++#define REGEXP_H
++
++
++/*
++http://www.opensource.apple.com/darwinsource/10.3/expect-1/expect/expect.h ,
++which contains a version of this library, says:
++
++ *
++ * NSUBEXP must be at least 10, and no greater than 117 or the parser
++ * will not work properly.
++ *
++
++However, it looks rather like this library is limited to 10. If you think
++otherwise, let us know.
++*/
++
++#define NSUBEXP 10
++typedef struct regexp {
++ char *startp[NSUBEXP];
++ char *endp[NSUBEXP];
++ char regstart; /* Internal use only. */
++ char reganch; /* Internal use only. */
++ char *regmust; /* Internal use only. */
++ int regmlen; /* Internal use only. */
++ char program[1]; /* Unwarranted chumminess with compiler. */
++} regexp;
++
++regexp * regcomp(char *exp, int *patternsize);
++int regexec(regexp *prog, char *string);
++void regsub(regexp *prog, char *source, char *dest);
++void regerror(char *s);
++
++#endif
+--- /dev/null
++++ b/net/netfilter/regexp/regmagic.h
+@@ -0,0 +1,5 @@
++/*
++ * The first byte of the regexp internal "program" is actually this magic
++ * number; the start node begins in the second byte.
++ */
++#define MAGIC 0234
+--- /dev/null
++++ b/net/netfilter/regexp/regsub.c
+@@ -0,0 +1,95 @@
++/*
++ * regsub
++ * @(#)regsub.c 1.3 of 2 April 86
++ *
++ * Copyright (c) 1986 by University of Toronto.
++ * Written by Henry Spencer. Not derived from licensed software.
++ *
++ * Permission is granted to anyone to use this software for any
++ * purpose on any computer system, and to redistribute it freely,
++ * subject to the following restrictions:
++ *
++ * 1. The author is not responsible for the consequences of use of
++ * this software, no matter how awful, even if they arise
++ * from defects in it.
++ *
++ * 2. The origin of this software must not be misrepresented, either
++ * by explicit claim or by omission.
++ *
++ * 3. Altered versions must be plainly marked as such, and must not
++ * be misrepresented as being the original software.
++ *
++ *
++ * This code was modified by Ethan Sommer to work within the kernel
++ * (it now uses kmalloc etc..)
++ *
++ */
++#include "regexp.h"
++#include "regmagic.h"
++#include <linux/string.h>
++
++
++#ifndef CHARBITS
++#define UCHARAT(p) ((int)*(unsigned char *)(p))
++#else
++#define UCHARAT(p) ((int)*(p)&CHARBITS)
++#endif
++
++#if 0
++//void regerror(char * s)
++//{
++// printk("regexp(3): %s", s);
++// /* NOTREACHED */
++//}
++#endif
++
++/*
++ - regsub - perform substitutions after a regexp match
++ */
++void
++regsub(regexp * prog, char * source, char * dest)
++{
++ register char *src;
++ register char *dst;
++ register char c;
++ register int no;
++ register int len;
++
++ /* Not necessary and gcc doesn't like it -MLS */
++ /*extern char *strncpy();*/
++
++ if (prog == NULL || source == NULL || dest == NULL) {
++ regerror("NULL parm to regsub");
++ return;
++ }
++ if (UCHARAT(prog->program) != MAGIC) {
++ regerror("damaged regexp fed to regsub");
++ return;
++ }
++
++ src = source;
++ dst = dest;
++ while ((c = *src++) != '\0') {
++ if (c == '&')
++ no = 0;
++ else if (c == '\\' && '0' <= *src && *src <= '9')
++ no = *src++ - '0';
++ else
++ no = -1;
++
++ if (no < 0) { /* Ordinary character. */
++ if (c == '\\' && (*src == '\\' || *src == '&'))
++ c = *src++;
++ *dst++ = c;
++ } else if (prog->startp[no] != NULL && prog->endp[no] != NULL) {
++ len = prog->endp[no] - prog->startp[no];
++ (void) strncpy(dst, prog->startp[no], len);
++ dst += len;
++ if (len != 0 && *(dst-1) == '\0') { /* strncpy hit NUL. */
++ regerror("damaged match string");
++ return;
++ }
++ }
++ }
++ *dst++ = '\0';
++}
+--- a/net/netfilter/nf_conntrack_core.c
++++ b/net/netfilter/nf_conntrack_core.c
+@@ -221,6 +221,14 @@ destroy_conntrack(struct nf_conntrack *n
+ * too. */
+ nf_ct_remove_expectations(ct);
+
++ #if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++ if(ct->layer7.app_proto)
++ kfree(ct->layer7.app_proto);
++ if(ct->layer7.app_data)
++ kfree(ct->layer7.app_data);
++ #endif
++
++
+ /* We overload first tuple to link into unconfirmed list. */
+ if (!nf_ct_is_confirmed(ct)) {
+ BUG_ON(hlist_nulls_unhashed(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode));
+--- a/net/netfilter/nf_conntrack_standalone.c
++++ b/net/netfilter/nf_conntrack_standalone.c
+@@ -239,6 +239,12 @@ static int ct_seq_show(struct seq_file *
+ if (ct_show_delta_time(s, ct))
+ goto release;
+
++#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++ if(ct->layer7.app_proto &&
++ seq_printf(s, "l7proto=%s ", ct->layer7.app_proto))
++ return -ENOSPC;
++#endif
++
+ if (seq_printf(s, "use=%u\n", atomic_read(&ct->ct_general.use)))
+ goto release;
+
+--- a/include/net/netfilter/nf_conntrack.h
++++ b/include/net/netfilter/nf_conntrack.h
+@@ -105,6 +105,22 @@ struct nf_conn {
+ struct net *ct_net;
+ #endif
+
++#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || \
++ defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++ struct {
++ /*
++ * e.g. "http". NULL before decision. "unknown" after decision
++ * if no match.
++ */
++ char *app_proto;
++ /*
++ * application layer data so far. NULL after match decision.
++ */
++ char *app_data;
++ unsigned int app_data_len;
++ } layer7;
++#endif
++
+ /* Storage reserved for other modules, must be the last member */
+ union nf_conntrack_proto proto;
+ };
+--- /dev/null
++++ b/include/linux/netfilter/xt_layer7.h
+@@ -0,0 +1,13 @@
++#ifndef _XT_LAYER7_H
++#define _XT_LAYER7_H
++
++#define MAX_PATTERN_LEN 8192
++#define MAX_PROTOCOL_LEN 256
++
++struct xt_layer7_info {
++ char protocol[MAX_PROTOCOL_LEN];
++ char pattern[MAX_PATTERN_LEN];
++ u_int8_t invert;
++};
++
++#endif /* _XT_LAYER7_H */
+--- a/include/uapi/linux/netfilter/Kbuild
++++ b/include/uapi/linux/netfilter/Kbuild
+@@ -51,6 +51,7 @@ header-y += xt_hashlimit.h
+ header-y += xt_helper.h
+ header-y += xt_iprange.h
+ header-y += xt_ipvs.h
++header-y += xt_layer7.h
+ header-y += xt_length.h
+ header-y += xt_limit.h
+ header-y += xt_mac.h
--- /dev/null
+--- a/include/linux/netfilter/xt_layer7.h
++++ b/include/linux/netfilter/xt_layer7.h
+@@ -8,6 +8,7 @@ struct xt_layer7_info {
+ char protocol[MAX_PROTOCOL_LEN];
+ char pattern[MAX_PATTERN_LEN];
+ u_int8_t invert;
++ u_int8_t pkt;
+ };
+
+ #endif /* _XT_LAYER7_H */
+--- a/net/netfilter/xt_layer7.c
++++ b/net/netfilter/xt_layer7.c
+@@ -314,33 +314,35 @@ static int match_no_append(struct nf_con
+ }
+
+ /* add the new app data to the conntrack. Return number of bytes added. */
+-static int add_data(struct nf_conn * master_conntrack,
+- char * app_data, int appdatalen)
++static int add_datastr(char *target, int offset, char *app_data, int len)
+ {
+ int length = 0, i;
+- int oldlength = master_conntrack->layer7.app_data_len;
+-
+- /* This is a fix for a race condition by Deti Fliegl. However, I'm not
+- clear on whether the race condition exists or whether this really
+- fixes it. I might just be being dense... Anyway, if it's not really
+- a fix, all it does is waste a very small amount of time. */
+- if(!master_conntrack->layer7.app_data) return 0;
++ if (!target) return 0;
+
+ /* Strip nulls. Make everything lower case (our regex lib doesn't
+ do case insensitivity). Add it to the end of the current data. */
+- for(i = 0; i < maxdatalen-oldlength-1 &&
+- i < appdatalen; i++) {
++ for(i = 0; i < maxdatalen-offset-1 && i < len; i++) {
+ if(app_data[i] != '\0') {
+ /* the kernel version of tolower mungs 'upper ascii' */
+- master_conntrack->layer7.app_data[length+oldlength] =
++ target[length+offset] =
+ isascii(app_data[i])?
+ tolower(app_data[i]) : app_data[i];
+ length++;
+ }
+ }
++ target[length+offset] = '\0';
++
++ return length;
++}
++
++/* add the new app data to the conntrack. Return number of bytes added. */
++static int add_data(struct nf_conn * master_conntrack,
++ char * app_data, int appdatalen)
++{
++ int length;
+
+- master_conntrack->layer7.app_data[length+oldlength] = '\0';
+- master_conntrack->layer7.app_data_len = length + oldlength;
++ length = add_datastr(master_conntrack->layer7.app_data, master_conntrack->layer7.app_data_len, app_data, appdatalen);
++ master_conntrack->layer7.app_data_len += length;
+
+ return length;
+ }
+@@ -438,7 +440,7 @@ match(const struct sk_buff *skbin,
+
+ enum ip_conntrack_info master_ctinfo, ctinfo;
+ struct nf_conn *master_conntrack, *conntrack;
+- unsigned char * app_data;
++ unsigned char *app_data, *tmp_data;
+ unsigned int pattern_result, appdatalen;
+ regexp * comppattern;
+
+@@ -466,8 +468,8 @@ match(const struct sk_buff *skbin,
+ master_conntrack = master_ct(master_conntrack);
+
+ /* if we've classified it or seen too many packets */
+- if(total_acct_packets(master_conntrack) > num_packets ||
+- master_conntrack->layer7.app_proto) {
++ if(!info->pkt && (total_acct_packets(master_conntrack) > num_packets ||
++ master_conntrack->layer7.app_proto)) {
+
+ pattern_result = match_no_append(conntrack, master_conntrack,
+ ctinfo, master_ctinfo, info);
+@@ -500,6 +502,25 @@ match(const struct sk_buff *skbin,
+ /* the return value gets checked later, when we're ready to use it */
+ comppattern = compile_and_cache(info->pattern, info->protocol);
+
++ if (info->pkt) {
++ tmp_data = kmalloc(maxdatalen, GFP_ATOMIC);
++ if(!tmp_data){
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in match, bailing.\n");
++ return info->invert;
++ }
++
++ tmp_data[0] = '\0';
++ add_datastr(tmp_data, 0, app_data, appdatalen);
++ pattern_result = ((comppattern && regexec(comppattern, tmp_data)) ? 1 : 0);
++
++ kfree(tmp_data);
++ tmp_data = NULL;
++ spin_unlock_bh(&l7_lock);
++
++ return (pattern_result ^ info->invert);
++ }
++
+ /* On the first packet of a connection, allocate space for app data */
+ if(total_acct_packets(master_conntrack) == 1 && !skb->cb[0] &&
+ !master_conntrack->layer7.app_data){
--- /dev/null
+--- a/net/netfilter/xt_layer7.c
++++ b/net/netfilter/xt_layer7.c
+@@ -415,7 +415,9 @@ static int layer7_write_proc(struct file
+ }
+
+ static bool
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35)
++match(const struct sk_buff *skbin, struct xt_action_param *par)
++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
+ match(const struct sk_buff *skbin, const struct xt_match_param *par)
+ #else
+ match(const struct sk_buff *skbin,
+@@ -597,14 +599,19 @@ match(const struct sk_buff *skbin,
+ }
+
+ // load nf_conntrack_ipv4
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35)
++static int
++#else
++static bool
++#endif
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
+-static bool check(const struct xt_mtchk_param *par)
++check(const struct xt_mtchk_param *par)
+ {
+ if (nf_ct_l3proto_try_module_get(par->match->family) < 0) {
+ printk(KERN_WARNING "can't load conntrack support for "
+ "proto=%d\n", par->match->family);
+ #else
+-static bool check(const char *tablename, const void *inf,
++check(const char *tablename, const void *inf,
+ const struct xt_match *match, void *matchinfo,
+ unsigned int hook_mask)
+ {
+@@ -612,9 +619,15 @@ static bool check(const char *tablename,
+ printk(KERN_WARNING "can't load conntrack support for "
+ "proto=%d\n", match->family);
+ #endif
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35)
++ return -EINVAL;
++ }
++ return 0;
++#else
+ return 0;
+ }
+ return 1;
++#endif
+ }
+
+
--- /dev/null
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -980,6 +980,27 @@ config NETFILTER_XT_MATCH_IPVS
+
+ If unsure, say N.
+
++config NETFILTER_XT_MATCH_LAYER7
++ tristate '"layer7" match support'
++ depends on EXPERIMENTAL
++ depends on NETFILTER_XTABLES
++ depends on NETFILTER_ADVANCED
++ depends on NF_CONNTRACK
++ help
++ Say Y if you want to be able to classify connections (and their
++ packets) based on regular expression matching of their application
++ layer data. This is one way to classify applications such as
++ peer-to-peer filesharing systems that do not always use the same
++ port.
++
++ To compile it as a module, choose M here. If unsure, say N.
++
++config NETFILTER_XT_MATCH_LAYER7_DEBUG
++ bool 'Layer 7 debugging output'
++ depends on NETFILTER_XT_MATCH_LAYER7
++ help
++ Say Y to get lots of debugging output.
++
+ config NETFILTER_XT_MATCH_LENGTH
+ tristate '"length" match support'
+ depends on NETFILTER_ADVANCED
+@@ -1176,26 +1197,11 @@ config NETFILTER_XT_MATCH_STATE
+
+ To compile it as a module, choose M here. If unsure, say N.
+
+-config NETFILTER_XT_MATCH_LAYER7
+- tristate '"layer7" match support'
+- depends on NETFILTER_XTABLES
+- depends on EXPERIMENTAL && (IP_NF_CONNTRACK || NF_CONNTRACK)
+- depends on NETFILTER_ADVANCED
+- help
+- Say Y if you want to be able to classify connections (and their
+- packets) based on regular expression matching of their application
+- layer data. This is one way to classify applications such as
+- peer-to-peer filesharing systems that do not always use the same
+- port.
+-
+- To compile it as a module, choose M here. If unsure, say N.
+-
+ config NETFILTER_XT_MATCH_LAYER7_DEBUG
+- bool 'Layer 7 debugging output'
+- depends on NETFILTER_XT_MATCH_LAYER7
+- help
+- Say Y to get lots of debugging output.
+-
++ bool 'Layer 7 debugging output'
++ depends on NETFILTER_XT_MATCH_LAYER7
++ help
++ Say Y to get lots of debugging output.
+
+ config NETFILTER_XT_MATCH_STATISTIC
+ tristate '"statistic" match support'
--- /dev/null
+--- a/include/linux/netfilter/nf_conntrack_sip.h
++++ b/include/linux/netfilter/nf_conntrack_sip.h
+@@ -4,12 +4,15 @@
+
+ #include <net/netfilter/nf_conntrack_expect.h>
+
++#include <linux/types.h>
++
+ #define SIP_PORT 5060
+ #define SIP_TIMEOUT 3600
+
+ struct nf_ct_sip_master {
+ unsigned int register_cseq;
+ unsigned int invite_cseq;
++ __be16 forced_dport;
+ };
+
+ enum sip_expectation_classes {
+--- a/net/netfilter/nf_nat_sip.c
++++ b/net/netfilter/nf_nat_sip.c
+@@ -95,11 +95,14 @@ static int map_addr(struct sk_buff *skb,
+ enum ip_conntrack_info ctinfo;
+ struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
+ enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
++ struct nf_ct_sip_master *ct_sip_info;
+ char buffer[INET6_ADDRSTRLEN + sizeof("[]:nnnnn")];
+ unsigned int buflen;
+ union nf_inet_addr newaddr;
+ __be16 newport;
+
++ ct_sip_info = nfct_help_data(ct->master);
++
+ if (nf_inet_addr_cmp(&ct->tuplehash[dir].tuple.src.u3, addr) &&
+ ct->tuplehash[dir].tuple.src.u.udp.port == port) {
+ newaddr = ct->tuplehash[!dir].tuple.dst.u3;
+@@ -107,7 +110,8 @@ static int map_addr(struct sk_buff *skb,
+ } else if (nf_inet_addr_cmp(&ct->tuplehash[dir].tuple.dst.u3, addr) &&
+ ct->tuplehash[dir].tuple.dst.u.udp.port == port) {
+ newaddr = ct->tuplehash[!dir].tuple.src.u3;
+- newport = ct->tuplehash[!dir].tuple.src.u.udp.port;
++ newport = ct_sip_info->forced_dport ? :
++ ct->tuplehash[!dir].tuple.src.u.udp.port;
+ } else
+ return 1;
+
+@@ -144,6 +148,7 @@ static unsigned int nf_nat_sip(struct sk
+ enum ip_conntrack_info ctinfo;
+ struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
+ enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
++ struct nf_conn_help *help = nfct_help(ct);
+ unsigned int coff, matchoff, matchlen;
+ enum sip_header_types hdr;
+ union nf_inet_addr addr;
+@@ -258,6 +263,22 @@ next:
+ !map_sip_addr(skb, protoff, dataoff, dptr, datalen, SIP_HDR_TO))
+ return NF_DROP;
+
++ struct nf_ct_sip_master *ct_sip_info = nfct_help_data(ct->master);
++
++ /* Mangle destination port for Cisco phones, then fix up checksums */
++ if (dir == IP_CT_DIR_REPLY && ct_sip_info->forced_dport) {
++ struct udphdr *uh;
++
++ if (!skb_make_writable(skb, skb->len))
++ return NF_DROP;
++
++ uh = (struct udphdr *)(skb->data + ip_hdrlen(skb));
++ uh->dest = ct_sip_info->forced_dport;
++
++ if (!nf_nat_mangle_udp_packet(skb, ct, ctinfo, 0, 0, NULL, 0))
++ return NF_DROP;
++ }
++
+ return NF_ACCEPT;
+ }
+
+@@ -311,10 +332,13 @@ static unsigned int nf_nat_sip_expect(st
+ enum ip_conntrack_info ctinfo;
+ struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
+ enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
++ struct nf_conn_help *help = nfct_help(ct);
+ union nf_inet_addr newaddr;
+ u_int16_t port;
++ __be16 srcport;
+ char buffer[INET6_ADDRSTRLEN + sizeof("[]:nnnnn")];
+ unsigned int buflen;
++ struct nf_ct_sip_master *ct_sip_info = nfct_help_data(ct->master);
+
+ /* Connection will come from reply */
+ if (nf_inet_addr_cmp(&ct->tuplehash[dir].tuple.src.u3,
+@@ -326,8 +350,9 @@ static unsigned int nf_nat_sip_expect(st
+ /* If the signalling port matches the connection's source port in the
+ * original direction, try to use the destination port in the opposite
+ * direction. */
+- if (exp->tuple.dst.u.udp.port ==
+- ct->tuplehash[dir].tuple.src.u.udp.port)
++ srcport = ct_sip_info->forced_dport ? :
++ ct->tuplehash[dir].tuple.src.u.udp.port;
++ if (exp->tuple.dst.u.udp.port == srcport)
+ port = ntohs(ct->tuplehash[!dir].tuple.dst.u.udp.port);
+ else
+ port = ntohs(exp->tuple.dst.u.udp.port);
+--- a/net/netfilter/nf_conntrack_sip.c
++++ b/net/netfilter/nf_conntrack_sip.c
+@@ -1440,8 +1440,26 @@ static int process_sip_request(struct sk
+ {
+ enum ip_conntrack_info ctinfo;
+ struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
++ struct nf_conn_help *help = nfct_help(ct);
++ enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
+ unsigned int matchoff, matchlen;
+ unsigned int cseq, i;
++ union nf_inet_addr addr;
++ __be16 port;
++ struct nf_ct_sip_master *ct_sip_info = nfct_help_data(ct->master);
++
++ /* Many Cisco IP phones use a high source port for SIP requests, but
++ * listen for the response on port 5060. If we are the local
++ * router for one of these phones, save the port number from the
++ * Via: header so that nf_nat_sip can redirect the responses to
++ * the correct port.
++ */
++ if (ct_sip_parse_header_uri(ct, *dptr, NULL, *datalen,
++ SIP_HDR_VIA_UDP, NULL, &matchoff,
++ &matchlen, &addr, &port) > 0 &&
++ port != ct->tuplehash[dir].tuple.src.u.udp.port &&
++ nf_inet_addr_cmp(&addr, &ct->tuplehash[dir].tuple.src.u3))
++ ct_sip_info->forced_dport = port;
+
+ for (i = 0; i < ARRAY_SIZE(sip_handlers); i++) {
+ const struct sip_handler *handler;
--- /dev/null
+--- a/include/uapi/linux/netfilter_ipv4/ip_tables.h
++++ b/include/uapi/linux/netfilter_ipv4/ip_tables.h
+@@ -87,6 +87,7 @@ struct ipt_ip {
+ #define IPT_F_FRAG 0x01 /* Set if rule is a fragment rule */
+ #define IPT_F_GOTO 0x02 /* Set if jump is a goto */
+ #define IPT_F_MASK 0x03 /* All possible flag bits mask. */
++#define IPT_F_NO_DEF_MATCH 0x80 /* Internal: no default match rules present */
+
+ /* Values for "inv" field in struct ipt_ip. */
+ #define IPT_INV_VIA_IN 0x01 /* Invert the sense of IN IFACE. */
+--- a/net/ipv4/netfilter/ip_tables.c
++++ b/net/ipv4/netfilter/ip_tables.c
+@@ -81,6 +81,9 @@ ip_packet_match(const struct iphdr *ip,
+
+ #define FWINV(bool, invflg) ((bool) ^ !!(ipinfo->invflags & (invflg)))
+
++ if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
++ return true;
++
+ if (FWINV((ip->saddr&ipinfo->smsk.s_addr) != ipinfo->src.s_addr,
+ IPT_INV_SRCIP) ||
+ FWINV((ip->daddr&ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr,
+@@ -134,6 +137,29 @@ ip_packet_match(const struct iphdr *ip,
+ return true;
+ }
+
++static void
++ip_checkdefault(struct ipt_ip *ip)
++{
++ static const char iface_mask[IFNAMSIZ] = {};
++
++ if (ip->invflags || ip->flags & IPT_F_FRAG)
++ return;
++
++ if (memcmp(ip->iniface_mask, iface_mask, IFNAMSIZ) != 0)
++ return;
++
++ if (memcmp(ip->outiface_mask, iface_mask, IFNAMSIZ) != 0)
++ return;
++
++ if (ip->smsk.s_addr || ip->dmsk.s_addr)
++ return;
++
++ if (ip->proto)
++ return;
++
++ ip->flags |= IPT_F_NO_DEF_MATCH;
++}
++
+ static bool
+ ip_checkentry(const struct ipt_ip *ip)
+ {
+@@ -560,7 +586,7 @@ static void cleanup_match(struct xt_entr
+ }
+
+ static int
+-check_entry(const struct ipt_entry *e, const char *name)
++check_entry(struct ipt_entry *e, const char *name)
+ {
+ const struct xt_entry_target *t;
+
+@@ -569,6 +595,8 @@ check_entry(const struct ipt_entry *e, c
+ return -EINVAL;
+ }
+
++ ip_checkdefault(&e->ip);
++
+ if (e->target_offset + sizeof(struct xt_entry_target) >
+ e->next_offset)
+ return -EINVAL;
+@@ -930,6 +958,7 @@ copy_entries_to_user(unsigned int total_
+ const struct xt_table_info *private = table->private;
+ int ret = 0;
+ const void *loc_cpu_entry;
++ u8 flags;
+
+ counters = alloc_counters(table);
+ if (IS_ERR(counters))
+@@ -960,6 +989,14 @@ copy_entries_to_user(unsigned int total_
+ ret = -EFAULT;
+ goto free_counters;
+ }
++
++ flags = e->ip.flags & IPT_F_MASK;
++ if (copy_to_user(userptr + off
++ + offsetof(struct ipt_entry, ip.flags),
++ &flags, sizeof(flags)) != 0) {
++ ret = -EFAULT;
++ goto free_counters;
++ }
+
+ for (i = sizeof(struct ipt_entry);
+ i < e->target_offset;
--- /dev/null
+--- a/net/ipv4/netfilter/ip_tables.c
++++ b/net/ipv4/netfilter/ip_tables.c
+@@ -309,6 +309,33 @@ struct ipt_entry *ipt_next_entry(const s
+ return (void *)entry + entry->next_offset;
+ }
+
++static bool
++ipt_handle_default_rule(struct ipt_entry *e, unsigned int *verdict)
++{
++ struct xt_entry_target *t;
++ struct xt_standard_target *st;
++
++ if (e->target_offset != sizeof(struct ipt_entry))
++ return false;
++
++ if (!(e->ip.flags & IPT_F_NO_DEF_MATCH))
++ return false;
++
++ t = ipt_get_target(e);
++ if (t->u.kernel.target->target)
++ return false;
++
++ st = (struct xt_standard_target *) t;
++ if (st->verdict == XT_RETURN)
++ return false;
++
++ if (st->verdict >= 0)
++ return false;
++
++ *verdict = (unsigned)(-st->verdict) - 1;
++ return true;
++}
++
+ /* Returns one of the generic firewall policies, like NF_ACCEPT. */
+ unsigned int
+ ipt_do_table(struct sk_buff *skb,
+@@ -333,6 +360,25 @@ ipt_do_table(struct sk_buff *skb,
+ ip = ip_hdr(skb);
+ indev = in ? in->name : nulldevname;
+ outdev = out ? out->name : nulldevname;
++
++ IP_NF_ASSERT(table->valid_hooks & (1 << hook));
++ local_bh_disable();
++ addend = xt_write_recseq_begin();
++ private = table->private;
++ cpu = smp_processor_id();
++ table_base = private->entries[cpu];
++ jumpstack = (struct ipt_entry **)private->jumpstack[cpu];
++ stackptr = per_cpu_ptr(private->stackptr, cpu);
++ origptr = *stackptr;
++
++ e = get_entry(table_base, private->hook_entry[hook]);
++ if (ipt_handle_default_rule(e, &verdict)) {
++ ADD_COUNTER(e->counters, skb->len, 1);
++ xt_write_recseq_end(addend);
++ local_bh_enable();
++ return verdict;
++ }
++
+ /* We handle fragments by dealing with the first fragment as
+ * if it was a normal packet. All other fragments are treated
+ * normally, except that they will NEVER match rules that ask
+@@ -347,18 +393,6 @@ ipt_do_table(struct sk_buff *skb,
+ acpar.family = NFPROTO_IPV4;
+ acpar.hooknum = hook;
+
+- IP_NF_ASSERT(table->valid_hooks & (1 << hook));
+- local_bh_disable();
+- addend = xt_write_recseq_begin();
+- private = table->private;
+- cpu = smp_processor_id();
+- table_base = private->entries[cpu];
+- jumpstack = (struct ipt_entry **)private->jumpstack[cpu];
+- stackptr = per_cpu_ptr(private->stackptr, cpu);
+- origptr = *stackptr;
+-
+- e = get_entry(table_base, private->hook_entry[hook]);
+-
+ pr_debug("Entering %s(hook %u); sp at %u (UF %p)\n",
+ table->name, hook, origptr,
+ get_entry(table_base, private->underflow[hook]));
--- /dev/null
+--- a/net/ipv4/netfilter/ip_tables.c
++++ b/net/ipv4/netfilter/ip_tables.c
+@@ -84,9 +84,11 @@ ip_packet_match(const struct iphdr *ip,
+ if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
+ return true;
+
+- if (FWINV((ip->saddr&ipinfo->smsk.s_addr) != ipinfo->src.s_addr,
++ if (FWINV(ipinfo->smsk.s_addr &&
++ (ip->saddr&ipinfo->smsk.s_addr) != ipinfo->src.s_addr,
+ IPT_INV_SRCIP) ||
+- FWINV((ip->daddr&ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr,
++ FWINV(ipinfo->dmsk.s_addr &&
++ (ip->daddr&ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr,
+ IPT_INV_DSTIP)) {
+ dprintf("Source or dest mismatch.\n");
+
--- /dev/null
+--- a/net/netfilter/nf_conntrack_proto_tcp.c
++++ b/net/netfilter/nf_conntrack_proto_tcp.c
+@@ -29,6 +29,9 @@
+ #include <net/netfilter/ipv4/nf_conntrack_ipv4.h>
+ #include <net/netfilter/ipv6/nf_conntrack_ipv6.h>
+
++/* Do not check the TCP window for incoming packets */
++static int nf_ct_tcp_no_window_check __read_mostly = 1;
++
+ /* "Be conservative in what you do,
+ be liberal in what you accept from others."
+ If it's non-zero, we mark only out of window RST segments as INVALID. */
+@@ -526,6 +529,9 @@ static bool tcp_in_window(const struct n
+ s16 receiver_offset;
+ bool res;
+
++ if (nf_ct_tcp_no_window_check)
++ return true;
++
+ /*
+ * Get the required data from the packet.
+ */
+@@ -1436,6 +1442,13 @@ static struct ctl_table tcp_sysctl_table
+ .mode = 0644,
+ .proc_handler = proc_dointvec,
+ },
++ {
++ .procname = "nf_conntrack_tcp_no_window_check",
++ .data = &nf_ct_tcp_no_window_check,
++ .maxlen = sizeof(unsigned int),
++ .mode = 0644,
++ .proc_handler = proc_dointvec,
++ },
+ { }
+ };
+
--- /dev/null
+--- a/include/uapi/linux/pkt_sched.h
++++ b/include/uapi/linux/pkt_sched.h
+@@ -214,6 +214,33 @@ struct tc_sfq_xstats {
+ __s32 allot;
+ };
+
++/* ESFQ section */
++
++enum
++{
++ /* traditional */
++ TCA_SFQ_HASH_CLASSIC,
++ TCA_SFQ_HASH_DST,
++ TCA_SFQ_HASH_SRC,
++ TCA_SFQ_HASH_FWMARK,
++ /* conntrack */
++ TCA_SFQ_HASH_CTORIGDST,
++ TCA_SFQ_HASH_CTORIGSRC,
++ TCA_SFQ_HASH_CTREPLDST,
++ TCA_SFQ_HASH_CTREPLSRC,
++ TCA_SFQ_HASH_CTNATCHG,
++};
++
++struct tc_esfq_qopt
++{
++ unsigned quantum; /* Bytes per round allocated to flow */
++ int perturb_period; /* Period of hash perturbation */
++ __u32 limit; /* Maximal packets in queue */
++ unsigned divisor; /* Hash divisor */
++ unsigned flows; /* Maximal number of flows */
++ unsigned hash_kind; /* Hash function to use for flow identification */
++};
++
+ /* RED section */
+
+ enum {
+--- a/net/sched/Kconfig
++++ b/net/sched/Kconfig
+@@ -148,6 +148,37 @@ config NET_SCH_SFQ
+ To compile this code as a module, choose M here: the
+ module will be called sch_sfq.
+
++config NET_SCH_ESFQ
++ tristate "Enhanced Stochastic Fairness Queueing (ESFQ)"
++ ---help---
++ Say Y here if you want to use the Enhanced Stochastic Fairness
++ Queueing (ESFQ) packet scheduling algorithm for some of your network
++ devices or as a leaf discipline for a classful qdisc such as HTB or
++ CBQ (see the top of <file:net/sched/sch_esfq.c> for details and
++ references to the SFQ algorithm).
++
++ This is an enchanced SFQ version which allows you to control some
++ hardcoded values in the SFQ scheduler.
++
++ ESFQ also adds control of the hash function used to identify packet
++ flows. The original SFQ discipline hashes by connection; ESFQ add
++ several other hashing methods, such as by src IP or by dst IP, which
++ can be more fair to users in some networking situations.
++
++ To compile this code as a module, choose M here: the
++ module will be called sch_esfq.
++
++config NET_SCH_ESFQ_NFCT
++ bool "Connection Tracking Hash Types"
++ depends on NET_SCH_ESFQ && NF_CONNTRACK
++ ---help---
++ Say Y here to enable support for hashing based on netfilter connection
++ tracking information. This is useful for a router that is also using
++ NAT to connect privately-addressed hosts to the Internet. If you want
++ to provide fair distribution of upstream bandwidth, ESFQ must use
++ connection tracking information, since all outgoing packets will share
++ the same source address.
++
+ config NET_SCH_TEQL
+ tristate "True Link Equalizer (TEQL)"
+ ---help---
+--- a/net/sched/Makefile
++++ b/net/sched/Makefile
+@@ -26,6 +26,7 @@ obj-$(CONFIG_NET_SCH_INGRESS) += sch_ing
+ obj-$(CONFIG_NET_SCH_DSMARK) += sch_dsmark.o
+ obj-$(CONFIG_NET_SCH_SFB) += sch_sfb.o
+ obj-$(CONFIG_NET_SCH_SFQ) += sch_sfq.o
++obj-$(CONFIG_NET_SCH_ESFQ) += sch_esfq.o
+ obj-$(CONFIG_NET_SCH_TBF) += sch_tbf.o
+ obj-$(CONFIG_NET_SCH_TEQL) += sch_teql.o
+ obj-$(CONFIG_NET_SCH_PRIO) += sch_prio.o
+--- /dev/null
++++ b/net/sched/sch_esfq.c
+@@ -0,0 +1,702 @@
++/*
++ * net/sched/sch_esfq.c Extended Stochastic Fairness Queueing discipline.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ *
++ * Authors: Alexey Kuznetsov, <kuznet@ms2.inr.ac.ru>
++ *
++ * Changes: Alexander Atanasov, <alex@ssi.bg>
++ * Added dynamic depth,limit,divisor,hash_kind options.
++ * Added dst and src hashes.
++ *
++ * Alexander Clouter, <alex@digriz.org.uk>
++ * Ported ESFQ to Linux 2.6.
++ *
++ * Corey Hickey, <bugfood-c@fatooh.org>
++ * Maintenance of the Linux 2.6 port.
++ * Added fwmark hash (thanks to Robert Kurjata).
++ * Added usage of jhash.
++ * Added conntrack support.
++ * Added ctnatchg hash (thanks to Ben Pfountz).
++ */
++
++#include <linux/module.h>
++#include <asm/uaccess.h>
++#include <linux/bitops.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/jiffies.h>
++#include <linux/string.h>
++#include <linux/mm.h>
++#include <linux/socket.h>
++#include <linux/sockios.h>
++#include <linux/in.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/if_ether.h>
++#include <linux/inet.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/notifier.h>
++#include <linux/init.h>
++#include <net/ip.h>
++#include <net/netlink.h>
++#include <linux/ipv6.h>
++#include <net/route.h>
++#include <linux/skbuff.h>
++#include <net/sock.h>
++#include <net/pkt_sched.h>
++#include <linux/jhash.h>
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++#include <net/netfilter/nf_conntrack.h>
++#endif
++
++/* Stochastic Fairness Queuing algorithm.
++ For more comments look at sch_sfq.c.
++ The difference is that you can change limit, depth,
++ hash table size and choose alternate hash types.
++
++ classic: same as in sch_sfq.c
++ dst: destination IP address
++ src: source IP address
++ fwmark: netfilter mark value
++ ctorigdst: original destination IP address
++ ctorigsrc: original source IP address
++ ctrepldst: reply destination IP address
++ ctreplsrc: reply source IP
++
++*/
++
++#define ESFQ_HEAD 0
++#define ESFQ_TAIL 1
++
++/* This type should contain at least SFQ_DEPTH*2 values */
++typedef unsigned int esfq_index;
++
++struct esfq_head
++{
++ esfq_index next;
++ esfq_index prev;
++};
++
++struct esfq_sched_data
++{
++/* Parameters */
++ int perturb_period;
++ unsigned quantum; /* Allotment per round: MUST BE >= MTU */
++ int limit;
++ unsigned depth;
++ unsigned hash_divisor;
++ unsigned hash_kind;
++/* Variables */
++ struct timer_list perturb_timer;
++ int perturbation;
++ esfq_index tail; /* Index of current slot in round */
++ esfq_index max_depth; /* Maximal depth */
++
++ esfq_index *ht; /* Hash table */
++ esfq_index *next; /* Active slots link */
++ short *allot; /* Current allotment per slot */
++ unsigned short *hash; /* Hash value indexed by slots */
++ struct sk_buff_head *qs; /* Slot queue */
++ struct esfq_head *dep; /* Linked list of slots, indexed by depth */
++};
++
++/* This contains the info we will hash. */
++struct esfq_packet_info
++{
++ u32 proto; /* protocol or port */
++ u32 src; /* source from packet header */
++ u32 dst; /* destination from packet header */
++ u32 ctorigsrc; /* original source from conntrack */
++ u32 ctorigdst; /* original destination from conntrack */
++ u32 ctreplsrc; /* reply source from conntrack */
++ u32 ctrepldst; /* reply destination from conntrack */
++ u32 mark; /* netfilter mark (fwmark) */
++};
++
++static __inline__ unsigned esfq_jhash_1word(struct esfq_sched_data *q,u32 a)
++{
++ return jhash_1word(a, q->perturbation) & (q->hash_divisor-1);
++}
++
++static __inline__ unsigned esfq_jhash_2words(struct esfq_sched_data *q, u32 a, u32 b)
++{
++ return jhash_2words(a, b, q->perturbation) & (q->hash_divisor-1);
++}
++
++static __inline__ unsigned esfq_jhash_3words(struct esfq_sched_data *q, u32 a, u32 b, u32 c)
++{
++ return jhash_3words(a, b, c, q->perturbation) & (q->hash_divisor-1);
++}
++
++static unsigned esfq_hash(struct esfq_sched_data *q, struct sk_buff *skb)
++{
++ struct esfq_packet_info info;
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++ enum ip_conntrack_info ctinfo;
++ struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
++#endif
++
++ switch (skb->protocol) {
++ case __constant_htons(ETH_P_IP):
++ {
++ struct iphdr *iph = ip_hdr(skb);
++ info.dst = iph->daddr;
++ info.src = iph->saddr;
++ if (!(iph->frag_off&htons(IP_MF|IP_OFFSET)) &&
++ (iph->protocol == IPPROTO_TCP ||
++ iph->protocol == IPPROTO_UDP ||
++ iph->protocol == IPPROTO_SCTP ||
++ iph->protocol == IPPROTO_DCCP ||
++ iph->protocol == IPPROTO_ESP))
++ info.proto = *(((u32*)iph) + iph->ihl);
++ else
++ info.proto = iph->protocol;
++ break;
++ }
++ case __constant_htons(ETH_P_IPV6):
++ {
++ struct ipv6hdr *iph = ipv6_hdr(skb);
++ /* Hash ipv6 addresses into a u32. This isn't ideal,
++ * but the code is simple. */
++ info.dst = jhash2(iph->daddr.s6_addr32, 4, q->perturbation);
++ info.src = jhash2(iph->saddr.s6_addr32, 4, q->perturbation);
++ if (iph->nexthdr == IPPROTO_TCP ||
++ iph->nexthdr == IPPROTO_UDP ||
++ iph->nexthdr == IPPROTO_SCTP ||
++ iph->nexthdr == IPPROTO_DCCP ||
++ iph->nexthdr == IPPROTO_ESP)
++ info.proto = *(u32*)&iph[1];
++ else
++ info.proto = iph->nexthdr;
++ break;
++ }
++ default:
++ info.dst = (u32)(unsigned long)skb_dst(skb);
++ info.src = (u32)(unsigned long)skb->sk;
++ info.proto = skb->protocol;
++ }
++
++ info.mark = skb->mark;
++
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++ /* defaults if there is no conntrack info */
++ info.ctorigsrc = info.src;
++ info.ctorigdst = info.dst;
++ info.ctreplsrc = info.dst;
++ info.ctrepldst = info.src;
++ /* collect conntrack info */
++ if (ct && ct != &nf_conntrack_untracked) {
++ if (skb->protocol == __constant_htons(ETH_P_IP)) {
++ info.ctorigsrc = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
++ info.ctorigdst = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3.ip;
++ info.ctreplsrc = ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3.ip;
++ info.ctrepldst = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip;
++ }
++ else if (skb->protocol == __constant_htons(ETH_P_IPV6)) {
++ /* Again, hash ipv6 addresses into a single u32. */
++ info.ctorigsrc = jhash2(ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip6, 4, q->perturbation);
++ info.ctorigdst = jhash2(ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3.ip6, 4, q->perturbation);
++ info.ctreplsrc = jhash2(ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3.ip6, 4, q->perturbation);
++ info.ctrepldst = jhash2(ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip6, 4, q->perturbation);
++ }
++
++ }
++#endif
++
++ switch(q->hash_kind) {
++ case TCA_SFQ_HASH_CLASSIC:
++ return esfq_jhash_3words(q, info.dst, info.src, info.proto);
++ case TCA_SFQ_HASH_DST:
++ return esfq_jhash_1word(q, info.dst);
++ case TCA_SFQ_HASH_SRC:
++ return esfq_jhash_1word(q, info.src);
++ case TCA_SFQ_HASH_FWMARK:
++ return esfq_jhash_1word(q, info.mark);
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++ case TCA_SFQ_HASH_CTORIGDST:
++ return esfq_jhash_1word(q, info.ctorigdst);
++ case TCA_SFQ_HASH_CTORIGSRC:
++ return esfq_jhash_1word(q, info.ctorigsrc);
++ case TCA_SFQ_HASH_CTREPLDST:
++ return esfq_jhash_1word(q, info.ctrepldst);
++ case TCA_SFQ_HASH_CTREPLSRC:
++ return esfq_jhash_1word(q, info.ctreplsrc);
++ case TCA_SFQ_HASH_CTNATCHG:
++ {
++ if (info.ctorigdst == info.ctreplsrc)
++ return esfq_jhash_1word(q, info.ctorigsrc);
++ return esfq_jhash_1word(q, info.ctreplsrc);
++ }
++#endif
++ default:
++ if (net_ratelimit())
++ printk(KERN_WARNING "ESFQ: Unknown hash method. Falling back to classic.\n");
++ }
++ return esfq_jhash_3words(q, info.dst, info.src, info.proto);
++}
++
++static inline void esfq_link(struct esfq_sched_data *q, esfq_index x)
++{
++ esfq_index p, n;
++ int d = q->qs[x].qlen + q->depth;
++
++ p = d;
++ n = q->dep[d].next;
++ q->dep[x].next = n;
++ q->dep[x].prev = p;
++ q->dep[p].next = q->dep[n].prev = x;
++}
++
++static inline void esfq_dec(struct esfq_sched_data *q, esfq_index x)
++{
++ esfq_index p, n;
++
++ n = q->dep[x].next;
++ p = q->dep[x].prev;
++ q->dep[p].next = n;
++ q->dep[n].prev = p;
++
++ if (n == p && q->max_depth == q->qs[x].qlen + 1)
++ q->max_depth--;
++
++ esfq_link(q, x);
++}
++
++static inline void esfq_inc(struct esfq_sched_data *q, esfq_index x)
++{
++ esfq_index p, n;
++ int d;
++
++ n = q->dep[x].next;
++ p = q->dep[x].prev;
++ q->dep[p].next = n;
++ q->dep[n].prev = p;
++ d = q->qs[x].qlen;
++ if (q->max_depth < d)
++ q->max_depth = d;
++
++ esfq_link(q, x);
++}
++
++static unsigned int esfq_drop(struct Qdisc *sch)
++{
++ struct esfq_sched_data *q = qdisc_priv(sch);
++ esfq_index d = q->max_depth;
++ struct sk_buff *skb;
++ unsigned int len;
++
++ /* Queue is full! Find the longest slot and
++ drop a packet from it */
++
++ if (d > 1) {
++ esfq_index x = q->dep[d+q->depth].next;
++ skb = q->qs[x].prev;
++ len = skb->len;
++ __skb_unlink(skb, &q->qs[x]);
++ kfree_skb(skb);
++ esfq_dec(q, x);
++ sch->q.qlen--;
++ sch->qstats.drops++;
++ sch->qstats.backlog -= len;
++ return len;
++ }
++
++ if (d == 1) {
++ /* It is difficult to believe, but ALL THE SLOTS HAVE LENGTH 1. */
++ d = q->next[q->tail];
++ q->next[q->tail] = q->next[d];
++ q->allot[q->next[d]] += q->quantum;
++ skb = q->qs[d].prev;
++ len = skb->len;
++ __skb_unlink(skb, &q->qs[d]);
++ kfree_skb(skb);
++ esfq_dec(q, d);
++ sch->q.qlen--;
++ q->ht[q->hash[d]] = q->depth;
++ sch->qstats.drops++;
++ sch->qstats.backlog -= len;
++ return len;
++ }
++
++ return 0;
++}
++
++static void esfq_q_enqueue(struct sk_buff *skb, struct esfq_sched_data *q, unsigned int end)
++{
++ unsigned hash = esfq_hash(q, skb);
++ unsigned depth = q->depth;
++ esfq_index x;
++
++ x = q->ht[hash];
++ if (x == depth) {
++ q->ht[hash] = x = q->dep[depth].next;
++ q->hash[x] = hash;
++ }
++
++ if (end == ESFQ_TAIL)
++ __skb_queue_tail(&q->qs[x], skb);
++ else
++ __skb_queue_head(&q->qs[x], skb);
++
++ esfq_inc(q, x);
++ if (q->qs[x].qlen == 1) { /* The flow is new */
++ if (q->tail == depth) { /* It is the first flow */
++ q->tail = x;
++ q->next[x] = x;
++ q->allot[x] = q->quantum;
++ } else {
++ q->next[x] = q->next[q->tail];
++ q->next[q->tail] = x;
++ q->tail = x;
++ }
++ }
++}
++
++static int esfq_enqueue(struct sk_buff *skb, struct Qdisc* sch)
++{
++ struct esfq_sched_data *q = qdisc_priv(sch);
++ esfq_q_enqueue(skb, q, ESFQ_TAIL);
++ sch->qstats.backlog += skb->len;
++ if (++sch->q.qlen < q->limit-1) {
++ sch->bstats.bytes += skb->len;
++ sch->bstats.packets++;
++ return 0;
++ }
++
++ sch->qstats.drops++;
++ esfq_drop(sch);
++ return NET_XMIT_CN;
++}
++
++static struct sk_buff *esfq_peek(struct Qdisc* sch)
++{
++ struct esfq_sched_data *q = qdisc_priv(sch);
++ esfq_index a;
++
++ /* No active slots */
++ if (q->tail == q->depth)
++ return NULL;
++
++ a = q->next[q->tail];
++ return skb_peek(&q->qs[a]);
++}
++
++static struct sk_buff *esfq_q_dequeue(struct esfq_sched_data *q)
++{
++ struct sk_buff *skb;
++ unsigned depth = q->depth;
++ esfq_index a, old_a;
++
++ /* No active slots */
++ if (q->tail == depth)
++ return NULL;
++
++ a = old_a = q->next[q->tail];
++
++ /* Grab packet */
++ skb = __skb_dequeue(&q->qs[a]);
++ esfq_dec(q, a);
++
++ /* Is the slot empty? */
++ if (q->qs[a].qlen == 0) {
++ q->ht[q->hash[a]] = depth;
++ a = q->next[a];
++ if (a == old_a) {
++ q->tail = depth;
++ return skb;
++ }
++ q->next[q->tail] = a;
++ q->allot[a] += q->quantum;
++ } else if ((q->allot[a] -= skb->len) <= 0) {
++ q->tail = a;
++ a = q->next[a];
++ q->allot[a] += q->quantum;
++ }
++
++ return skb;
++}
++
++static struct sk_buff *esfq_dequeue(struct Qdisc* sch)
++{
++ struct esfq_sched_data *q = qdisc_priv(sch);
++ struct sk_buff *skb;
++
++ skb = esfq_q_dequeue(q);
++ if (skb == NULL)
++ return NULL;
++ sch->q.qlen--;
++ sch->qstats.backlog -= skb->len;
++ return skb;
++}
++
++static void esfq_q_destroy(struct esfq_sched_data *q)
++{
++ del_timer(&q->perturb_timer);
++ if(q->ht)
++ kfree(q->ht);
++ if(q->dep)
++ kfree(q->dep);
++ if(q->next)
++ kfree(q->next);
++ if(q->allot)
++ kfree(q->allot);
++ if(q->hash)
++ kfree(q->hash);
++ if(q->qs)
++ kfree(q->qs);
++}
++
++static void esfq_destroy(struct Qdisc *sch)
++{
++ struct esfq_sched_data *q = qdisc_priv(sch);
++ esfq_q_destroy(q);
++}
++
++
++static void esfq_reset(struct Qdisc* sch)
++{
++ struct sk_buff *skb;
++
++ while ((skb = esfq_dequeue(sch)) != NULL)
++ kfree_skb(skb);
++}
++
++static void esfq_perturbation(unsigned long arg)
++{
++ struct Qdisc *sch = (struct Qdisc*)arg;
++ struct esfq_sched_data *q = qdisc_priv(sch);
++
++ q->perturbation = net_random()&0x1F;
++
++ if (q->perturb_period) {
++ q->perturb_timer.expires = jiffies + q->perturb_period;
++ add_timer(&q->perturb_timer);
++ }
++}
++
++static unsigned int esfq_check_hash(unsigned int kind)
++{
++ switch (kind) {
++ case TCA_SFQ_HASH_CTORIGDST:
++ case TCA_SFQ_HASH_CTORIGSRC:
++ case TCA_SFQ_HASH_CTREPLDST:
++ case TCA_SFQ_HASH_CTREPLSRC:
++ case TCA_SFQ_HASH_CTNATCHG:
++#ifndef CONFIG_NET_SCH_ESFQ_NFCT
++ {
++ if (net_ratelimit())
++ printk(KERN_WARNING "ESFQ: Conntrack hash types disabled in kernel config. Falling back to classic.\n");
++ return TCA_SFQ_HASH_CLASSIC;
++ }
++#endif
++ case TCA_SFQ_HASH_CLASSIC:
++ case TCA_SFQ_HASH_DST:
++ case TCA_SFQ_HASH_SRC:
++ case TCA_SFQ_HASH_FWMARK:
++ return kind;
++ default:
++ {
++ if (net_ratelimit())
++ printk(KERN_WARNING "ESFQ: Unknown hash type. Falling back to classic.\n");
++ return TCA_SFQ_HASH_CLASSIC;
++ }
++ }
++}
++
++static int esfq_q_init(struct esfq_sched_data *q, struct nlattr *opt)
++{
++ struct tc_esfq_qopt *ctl = nla_data(opt);
++ esfq_index p = ~0U/2;
++ int i;
++
++ if (opt && opt->nla_len < nla_attr_size(sizeof(*ctl)))
++ return -EINVAL;
++
++ q->perturbation = 0;
++ q->hash_kind = TCA_SFQ_HASH_CLASSIC;
++ q->max_depth = 0;
++ if (opt == NULL) {
++ q->perturb_period = 0;
++ q->hash_divisor = 1024;
++ q->tail = q->limit = q->depth = 128;
++
++ } else {
++ struct tc_esfq_qopt *ctl = nla_data(opt);
++ if (ctl->quantum)
++ q->quantum = ctl->quantum;
++ q->perturb_period = ctl->perturb_period*HZ;
++ q->hash_divisor = ctl->divisor ? : 1024;
++ q->tail = q->limit = q->depth = ctl->flows ? : 128;
++
++ if ( q->depth > p - 1 )
++ return -EINVAL;
++
++ if (ctl->limit)
++ q->limit = min_t(u32, ctl->limit, q->depth);
++
++ if (ctl->hash_kind) {
++ q->hash_kind = esfq_check_hash(ctl->hash_kind);
++ }
++ }
++
++ q->ht = kmalloc(q->hash_divisor*sizeof(esfq_index), GFP_KERNEL);
++ if (!q->ht)
++ goto err_case;
++ q->dep = kmalloc((1+q->depth*2)*sizeof(struct esfq_head), GFP_KERNEL);
++ if (!q->dep)
++ goto err_case;
++ q->next = kmalloc(q->depth*sizeof(esfq_index), GFP_KERNEL);
++ if (!q->next)
++ goto err_case;
++ q->allot = kmalloc(q->depth*sizeof(short), GFP_KERNEL);
++ if (!q->allot)
++ goto err_case;
++ q->hash = kmalloc(q->depth*sizeof(unsigned short), GFP_KERNEL);
++ if (!q->hash)
++ goto err_case;
++ q->qs = kmalloc(q->depth*sizeof(struct sk_buff_head), GFP_KERNEL);
++ if (!q->qs)
++ goto err_case;
++
++ for (i=0; i< q->hash_divisor; i++)
++ q->ht[i] = q->depth;
++ for (i=0; i<q->depth; i++) {
++ skb_queue_head_init(&q->qs[i]);
++ q->dep[i+q->depth].next = i+q->depth;
++ q->dep[i+q->depth].prev = i+q->depth;
++ }
++
++ for (i=0; i<q->depth; i++)
++ esfq_link(q, i);
++ return 0;
++err_case:
++ esfq_q_destroy(q);
++ return -ENOBUFS;
++}
++
++static int esfq_init(struct Qdisc *sch, struct nlattr *opt)
++{
++ struct esfq_sched_data *q = qdisc_priv(sch);
++ int err;
++
++ q->quantum = psched_mtu(qdisc_dev(sch)); /* default */
++ if ((err = esfq_q_init(q, opt)))
++ return err;
++
++ init_timer(&q->perturb_timer);
++ q->perturb_timer.data = (unsigned long)sch;
++ q->perturb_timer.function = esfq_perturbation;
++ if (q->perturb_period) {
++ q->perturb_timer.expires = jiffies + q->perturb_period;
++ add_timer(&q->perturb_timer);
++ }
++
++ return 0;
++}
++
++static int esfq_change(struct Qdisc *sch, struct nlattr *opt)
++{
++ struct esfq_sched_data *q = qdisc_priv(sch);
++ struct esfq_sched_data new;
++ struct sk_buff *skb;
++ int err;
++
++ /* set up new queue */
++ memset(&new, 0, sizeof(struct esfq_sched_data));
++ new.quantum = psched_mtu(qdisc_dev(sch)); /* default */
++ if ((err = esfq_q_init(&new, opt)))
++ return err;
++
++ /* copy all packets from the old queue to the new queue */
++ sch_tree_lock(sch);
++ while ((skb = esfq_q_dequeue(q)) != NULL)
++ esfq_q_enqueue(skb, &new, ESFQ_TAIL);
++
++ /* clean up the old queue */
++ esfq_q_destroy(q);
++
++ /* copy elements of the new queue into the old queue */
++ q->perturb_period = new.perturb_period;
++ q->quantum = new.quantum;
++ q->limit = new.limit;
++ q->depth = new.depth;
++ q->hash_divisor = new.hash_divisor;
++ q->hash_kind = new.hash_kind;
++ q->tail = new.tail;
++ q->max_depth = new.max_depth;
++ q->ht = new.ht;
++ q->dep = new.dep;
++ q->next = new.next;
++ q->allot = new.allot;
++ q->hash = new.hash;
++ q->qs = new.qs;
++
++ /* finish up */
++ if (q->perturb_period) {
++ q->perturb_timer.expires = jiffies + q->perturb_period;
++ add_timer(&q->perturb_timer);
++ } else {
++ q->perturbation = 0;
++ }
++ sch_tree_unlock(sch);
++ return 0;
++}
++
++static int esfq_dump(struct Qdisc *sch, struct sk_buff *skb)
++{
++ struct esfq_sched_data *q = qdisc_priv(sch);
++ unsigned char *b = skb_tail_pointer(skb);
++ struct tc_esfq_qopt opt;
++
++ opt.quantum = q->quantum;
++ opt.perturb_period = q->perturb_period/HZ;
++
++ opt.limit = q->limit;
++ opt.divisor = q->hash_divisor;
++ opt.flows = q->depth;
++ opt.hash_kind = q->hash_kind;
++
++ if (nla_put(skb, TCA_OPTIONS, sizeof(opt), &opt))
++ goto nla_put_failure;
++
++ return skb->len;
++
++nla_put_failure:
++ nlmsg_trim(skb, b);
++ return -1;
++}
++
++static struct Qdisc_ops esfq_qdisc_ops =
++{
++ .next = NULL,
++ .cl_ops = NULL,
++ .id = "esfq",
++ .priv_size = sizeof(struct esfq_sched_data),
++ .enqueue = esfq_enqueue,
++ .dequeue = esfq_dequeue,
++ .peek = esfq_peek,
++ .drop = esfq_drop,
++ .init = esfq_init,
++ .reset = esfq_reset,
++ .destroy = esfq_destroy,
++ .change = esfq_change,
++ .dump = esfq_dump,
++ .owner = THIS_MODULE,
++};
++
++static int __init esfq_module_init(void)
++{
++ return register_qdisc(&esfq_qdisc_ops);
++}
++static void __exit esfq_module_exit(void)
++{
++ unregister_qdisc(&esfq_qdisc_ops);
++}
++module_init(esfq_module_init)
++module_exit(esfq_module_exit)
++MODULE_LICENSE("GPL");
--- /dev/null
+--- /dev/null
++++ b/net/sched/act_connmark.c
+@@ -0,0 +1,137 @@
++/*
++ * Copyright (c) 2011 Felix Fietkau <nbd@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms and conditions of the GNU General Public License,
++ * version 2, as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
++ * Place - Suite 330, Boston, MA 02111-1307 USA.
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/skbuff.h>
++#include <linux/rtnetlink.h>
++#include <linux/pkt_cls.h>
++#include <linux/ip.h>
++#include <linux/ipv6.h>
++#include <net/netlink.h>
++#include <net/pkt_sched.h>
++#include <net/act_api.h>
++
++#include <net/netfilter/nf_conntrack.h>
++#include <net/netfilter/nf_conntrack_core.h>
++
++#define TCA_ACT_CONNMARK 20
++
++#define CONNMARK_TAB_MASK 3
++static struct tcf_common *tcf_connmark_ht[CONNMARK_TAB_MASK + 1];
++static u32 connmark_idx_gen;
++static DEFINE_RWLOCK(connmark_lock);
++
++static struct tcf_hashinfo connmark_hash_info = {
++ .htab = tcf_connmark_ht,
++ .hmask = CONNMARK_TAB_MASK,
++ .lock = &connmark_lock,
++};
++
++static int tcf_connmark(struct sk_buff *skb, const struct tc_action *a,
++ struct tcf_result *res)
++{
++ struct nf_conn *c;
++ enum ip_conntrack_info ctinfo;
++ int proto;
++ int r;
++
++ if (skb->protocol == htons(ETH_P_IP)) {
++ if (skb->len < sizeof(struct iphdr))
++ goto out;
++ proto = PF_INET;
++ } else if (skb->protocol == htons(ETH_P_IPV6)) {
++ if (skb->len < sizeof(struct ipv6hdr))
++ goto out;
++ proto = PF_INET6;
++ } else
++ goto out;
++
++ r = nf_conntrack_in(dev_net(skb->dev), proto, NF_INET_PRE_ROUTING, skb);
++ if (r != NF_ACCEPT)
++ goto out;
++
++ c = nf_ct_get(skb, &ctinfo);
++ if (!c)
++ goto out;
++
++ skb->mark = c->mark;
++ nf_conntrack_put(skb->nfct);
++ skb->nfct = NULL;
++
++out:
++ return TC_ACT_PIPE;
++}
++
++static int tcf_connmark_init(struct nlattr *nla, struct nlattr *est,
++ struct tc_action *a, int ovr, int bind)
++{
++ struct tcf_common *pc;
++
++ pc = tcf_hash_create(0, est, a, sizeof(*pc), bind,
++ &connmark_idx_gen, &connmark_hash_info);
++ if (IS_ERR(pc))
++ return PTR_ERR(pc);
++
++ tcf_hash_insert(pc, &connmark_hash_info);
++
++ return ACT_P_CREATED;
++}
++
++static inline int tcf_connmark_cleanup(struct tc_action *a, int bind)
++{
++ if (a->priv)
++ return tcf_hash_release(a->priv, bind, &connmark_hash_info);
++ return 0;
++}
++
++static inline int tcf_connmark_dump(struct sk_buff *skb, struct tc_action *a,
++ int bind, int ref)
++{
++ return skb->len;
++}
++
++static struct tc_action_ops act_connmark_ops = {
++ .kind = "connmark",
++ .hinfo = &connmark_hash_info,
++ .type = TCA_ACT_CONNMARK,
++ .capab = TCA_CAP_NONE,
++ .owner = THIS_MODULE,
++ .act = tcf_connmark,
++ .dump = tcf_connmark_dump,
++ .cleanup = tcf_connmark_cleanup,
++ .init = tcf_connmark_init,
++ .walk = tcf_generic_walker,
++};
++
++MODULE_AUTHOR("Felix Fietkau <nbd@openwrt.org>");
++MODULE_DESCRIPTION("Connection tracking mark restoring");
++MODULE_LICENSE("GPL");
++
++static int __init connmark_init_module(void)
++{
++ return tcf_register_action(&act_connmark_ops);
++}
++
++static void __exit connmark_cleanup_module(void)
++{
++ tcf_unregister_action(&act_connmark_ops);
++}
++
++module_init(connmark_init_module);
++module_exit(connmark_cleanup_module);
+--- a/net/sched/Kconfig
++++ b/net/sched/Kconfig
+@@ -670,6 +670,19 @@ config NET_ACT_CSUM
+ To compile this code as a module, choose M here: the
+ module will be called act_csum.
+
++config NET_ACT_CONNMARK
++ tristate "Connection Tracking Marking"
++ depends on NET_CLS_ACT
++ depends on NF_CONNTRACK
++ depends on NF_CONNTRACK_MARK
++ ---help---
++ Say Y here to restore the connmark from a scheduler action
++
++ If unsure, say N.
++
++ To compile this code as a module, choose M here: the
++ module will be called act_connmark.
++
+ config NET_CLS_IND
+ bool "Incoming device classification"
+ depends on NET_CLS_U32 || NET_CLS_FW
+--- a/net/sched/Makefile
++++ b/net/sched/Makefile
+@@ -16,6 +16,7 @@ obj-$(CONFIG_NET_ACT_PEDIT) += act_pedit
+ obj-$(CONFIG_NET_ACT_SIMP) += act_simple.o
+ obj-$(CONFIG_NET_ACT_SKBEDIT) += act_skbedit.o
+ obj-$(CONFIG_NET_ACT_CSUM) += act_csum.o
++obj-$(CONFIG_NET_ACT_CONNMARK) += act_connmark.o
+ obj-$(CONFIG_NET_SCH_FIFO) += sch_fifo.o
+ obj-$(CONFIG_NET_SCH_CBQ) += sch_cbq.o
+ obj-$(CONFIG_NET_SCH_HTB) += sch_htb.o
--- /dev/null
+This patch allows the user to specify desired packet types (outgoing,
+broadcast, unicast, etc.) on packet sockets via setsockopt.
+This can reduce the load in situations where only a limited number
+of packet types are necessary
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+
+--- a/include/uapi/linux/if_packet.h
++++ b/include/uapi/linux/if_packet.h
+@@ -29,6 +29,8 @@ struct sockaddr_ll {
+ /* These ones are invisible by user level */
+ #define PACKET_LOOPBACK 5 /* MC/BRD frame looped back */
+ #define PACKET_FASTROUTE 6 /* Fastrouted frame */
++#define PACKET_MASK_ANY 0xffffffff /* mask for packet type bits */
++
+
+ /* Packet socket options */
+
+@@ -50,6 +52,7 @@ struct sockaddr_ll {
+ #define PACKET_TX_TIMESTAMP 16
+ #define PACKET_TIMESTAMP 17
+ #define PACKET_FANOUT 18
++#define PACKET_RECV_TYPE 19
+
+ #define PACKET_FANOUT_HASH 0
+ #define PACKET_FANOUT_LB 1
+--- a/net/packet/af_packet.c
++++ b/net/packet/af_packet.c
+@@ -1273,6 +1273,7 @@ static int packet_rcv_spkt(struct sk_buf
+ {
+ struct sock *sk;
+ struct sockaddr_pkt *spkt;
++ struct packet_sock *po;
+
+ /*
+ * When we registered the protocol we saved the socket in the data
+@@ -1280,6 +1281,7 @@ static int packet_rcv_spkt(struct sk_buf
+ */
+
+ sk = pt->af_packet_priv;
++ po = pkt_sk(sk);
+
+ /*
+ * Yank back the headers [hope the device set this
+@@ -1292,7 +1294,7 @@ static int packet_rcv_spkt(struct sk_buf
+ * so that this procedure is noop.
+ */
+
+- if (skb->pkt_type == PACKET_LOOPBACK)
++ if (!(po->pkt_type & (1 << skb->pkt_type)))
+ goto out;
+
+ if (!net_eq(dev_net(dev), sock_net(sk)))
+@@ -1498,12 +1500,12 @@ static int packet_rcv(struct sk_buff *sk
+ int skb_len = skb->len;
+ unsigned int snaplen, res;
+
+- if (skb->pkt_type == PACKET_LOOPBACK)
+- goto drop;
+-
+ sk = pt->af_packet_priv;
+ po = pkt_sk(sk);
+
++ if (!(po->pkt_type & (1 << skb->pkt_type)))
++ goto drop;
++
+ if (!net_eq(dev_net(dev), sock_net(sk)))
+ goto drop;
+
+@@ -1622,12 +1624,12 @@ static int tpacket_rcv(struct sk_buff *s
+ struct timespec ts;
+ struct skb_shared_hwtstamps *shhwtstamps = skb_hwtstamps(skb);
+
+- if (skb->pkt_type == PACKET_LOOPBACK)
+- goto drop;
+-
+ sk = pt->af_packet_priv;
+ po = pkt_sk(sk);
+
++ if (!(po->pkt_type & (1 << skb->pkt_type)))
++ goto drop;
++
+ if (!net_eq(dev_net(dev), sock_net(sk)))
+ goto drop;
+
+@@ -2511,6 +2513,7 @@ static int packet_create(struct net *net
+ spin_lock_init(&po->bind_lock);
+ mutex_init(&po->pg_vec_lock);
+ po->prot_hook.func = packet_rcv;
++ po->pkt_type = PACKET_MASK_ANY & ~(1 << PACKET_LOOPBACK);
+
+ if (sock->type == SOCK_PACKET)
+ po->prot_hook.func = packet_rcv_spkt;
+@@ -3111,6 +3114,16 @@ packet_setsockopt(struct socket *sock, i
+
+ return fanout_add(sk, val & 0xffff, val >> 16);
+ }
++ case PACKET_RECV_TYPE:
++ {
++ unsigned int val;
++ if (optlen != sizeof(val))
++ return -EINVAL;
++ if (copy_from_user(&val, optval, sizeof(val)))
++ return -EFAULT;
++ po->pkt_type = val & ~PACKET_LOOPBACK;
++ return 0;
++ }
+ default:
+ return -ENOPROTOOPT;
+ }
+@@ -3165,6 +3178,13 @@ static int packet_getsockopt(struct sock
+ case PACKET_VNET_HDR:
+ val = po->has_vnet_hdr;
+ break;
++ case PACKET_RECV_TYPE:
++ if (len > sizeof(unsigned int))
++ len = sizeof(unsigned int);
++ val = po->pkt_type;
++
++ data = &val;
++ break;
+ case PACKET_VERSION:
+ val = po->tp_version;
+ break;
+--- a/net/packet/internal.h
++++ b/net/packet/internal.h
+@@ -111,6 +111,7 @@ struct packet_sock {
+ unsigned int tp_loss:1;
+ unsigned int tp_tstamp;
+ struct packet_type prot_hook ____cacheline_aligned_in_smp;
++ unsigned int pkt_type;
+ };
+
+ static struct packet_sock *pkt_sk(struct sock *sk)
--- /dev/null
+--- a/net/bridge/br_input.c
++++ b/net/bridge/br_input.c
+@@ -78,7 +78,11 @@ int br_handle_frame_finish(struct sk_buf
+
+ dst = NULL;
+
+- if (is_broadcast_ether_addr(dest))
++ if (skb->protocol == htons(ETH_P_PAE)) {
++ skb2 = skb;
++ /* Do not forward 802.1x/EAP frames */
++ skb = NULL;
++ } else if (is_broadcast_ether_addr(dest))
+ skb2 = skb;
+ else if (is_multicast_ether_addr(dest)) {
+ mdst = br_mdb_get(br, skb);
--- /dev/null
+--- a/net/bridge/br_input.c
++++ b/net/bridge/br_input.c
+@@ -65,7 +65,7 @@ int br_handle_frame_finish(struct sk_buf
+ br_multicast_rcv(br, p, skb))
+ goto drop;
+
+- if (p->state == BR_STATE_LEARNING)
++ if ((p->state == BR_STATE_LEARNING) && skb->protocol != htons(ETH_P_PAE))
+ goto drop;
+
+ BR_INPUT_SKB_CB(skb)->brdev = br->dev;
--- /dev/null
+--- a/net/bridge/br_private.h
++++ b/net/bridge/br_private.h
+@@ -135,6 +135,7 @@ struct net_bridge_port
+
+ unsigned long flags;
+ #define BR_HAIRPIN_MODE 0x00000001
++#define BR_ISOLATE_MODE 0x00000002
+
+ #ifdef CONFIG_BRIDGE_IGMP_SNOOPING
+ u32 multicast_startup_queries_sent;
+--- a/net/bridge/br_sysfs_if.c
++++ b/net/bridge/br_sysfs_if.c
+@@ -149,6 +149,22 @@ static int store_hairpin_mode(struct net
+ static BRPORT_ATTR(hairpin_mode, S_IRUGO | S_IWUSR,
+ show_hairpin_mode, store_hairpin_mode);
+
++static ssize_t show_isolate_mode(struct net_bridge_port *p, char *buf)
++{
++ int isolate_mode = (p->flags & BR_ISOLATE_MODE) ? 1 : 0;
++ return sprintf(buf, "%d\n", isolate_mode);
++}
++static ssize_t store_isolate_mode(struct net_bridge_port *p, unsigned long v)
++{
++ if (v)
++ p->flags |= BR_ISOLATE_MODE;
++ else
++ p->flags &= ~BR_ISOLATE_MODE;
++ return 0;
++}
++static BRPORT_ATTR(isolate_mode, S_IRUGO | S_IWUSR,
++ show_isolate_mode, store_isolate_mode);
++
+ #ifdef CONFIG_BRIDGE_IGMP_SNOOPING
+ static ssize_t show_multicast_router(struct net_bridge_port *p, char *buf)
+ {
+@@ -181,6 +197,7 @@ static const struct brport_attribute *br
+ &brport_attr_hold_timer,
+ &brport_attr_flush,
+ &brport_attr_hairpin_mode,
++ &brport_attr_isolate_mode,
+ #ifdef CONFIG_BRIDGE_IGMP_SNOOPING
+ &brport_attr_multicast_router,
+ #endif
+--- a/net/bridge/br_input.c
++++ b/net/bridge/br_input.c
+@@ -98,7 +98,8 @@ int br_handle_frame_finish(struct sk_buf
+ skb2 = skb;
+
+ br->dev->stats.multicast++;
+- } else if ((dst = __br_fdb_get(br, dest)) && dst->is_local) {
++ } else if ((p->flags & BR_ISOLATE_MODE) ||
++ ((dst = __br_fdb_get(br, dest)) && dst->is_local)) {
+ skb2 = skb;
+ /* Do not forward the packet since it's local. */
+ skb = NULL;
+--- a/net/bridge/br_forward.c
++++ b/net/bridge/br_forward.c
+@@ -110,7 +110,7 @@ void br_deliver(const struct net_bridge_
+ /* called with rcu_read_lock */
+ void br_forward(const struct net_bridge_port *to, struct sk_buff *skb, struct sk_buff *skb0)
+ {
+- if (should_deliver(to, skb)) {
++ if (should_deliver(to, skb) && !(to->flags & BR_ISOLATE_MODE)) {
+ if (skb0)
+ deliver_clone(to, skb, __br_forward);
+ else
+@@ -165,7 +165,8 @@ out:
+ static void br_flood(struct net_bridge *br, struct sk_buff *skb,
+ struct sk_buff *skb0,
+ void (*__packet_hook)(const struct net_bridge_port *p,
+- struct sk_buff *skb))
++ struct sk_buff *skb),
++ bool forward)
+ {
+ struct net_bridge_port *p;
+ struct net_bridge_port *prev;
+@@ -173,6 +174,9 @@ static void br_flood(struct net_bridge *
+ prev = NULL;
+
+ list_for_each_entry_rcu(p, &br->port_list, list) {
++ if (forward && (p->flags & BR_ISOLATE_MODE))
++ continue;
++
+ prev = maybe_deliver(prev, p, skb, __packet_hook);
+ if (IS_ERR(prev))
+ goto out;
+@@ -196,14 +200,14 @@ out:
+ /* called with rcu_read_lock */
+ void br_flood_deliver(struct net_bridge *br, struct sk_buff *skb)
+ {
+- br_flood(br, skb, NULL, __br_deliver);
++ br_flood(br, skb, NULL, __br_deliver, false);
+ }
+
+ /* called under bridge lock */
+ void br_flood_forward(struct net_bridge *br, struct sk_buff *skb,
+ struct sk_buff *skb2)
+ {
+- br_flood(br, skb, skb2, __br_forward);
++ br_flood(br, skb, skb2, __br_forward, true);
+ }
+
+ #ifdef CONFIG_BRIDGE_IGMP_SNOOPING
--- /dev/null
+--- a/include/net/addrconf.h
++++ b/include/net/addrconf.h
+@@ -92,6 +92,12 @@ extern void addrconf_join_solict(struc
+ extern void addrconf_leave_solict(struct inet6_dev *idev,
+ const struct in6_addr *addr);
+
++extern int (*ipv6_dev_get_saddr_hook)(struct net *net,
++ struct net_device *dev,
++ const struct in6_addr *daddr,
++ unsigned int srcprefs,
++ struct in6_addr *saddr);
++
+ static inline unsigned long addrconf_timeout_fixup(u32 timeout,
+ unsigned int unit)
+ {
+--- a/net/bridge/Kconfig
++++ b/net/bridge/Kconfig
+@@ -6,7 +6,6 @@ config BRIDGE
+ tristate "802.1d Ethernet Bridging"
+ select LLC
+ select STP
+- depends on IPV6 || IPV6=n
+ ---help---
+ If you say Y here, then your Linux box will be able to act as an
+ Ethernet bridge, which means that the different Ethernet segments it
+--- a/net/ipv6/Makefile
++++ b/net/ipv6/Makefile
+@@ -41,3 +41,4 @@ obj-$(CONFIG_IPV6_GRE) += ip6_gre.o
+ obj-y += addrconf_core.o exthdrs_core.o
+
+ obj-$(subst m,y,$(CONFIG_IPV6)) += inet6_hashtables.o
++obj-$(subst m,y,$(CONFIG_IPV6)) += inet6_stubs.o
+--- a/net/ipv6/addrconf.c
++++ b/net/ipv6/addrconf.c
+@@ -1092,7 +1092,7 @@ out:
+ return ret;
+ }
+
+-int ipv6_dev_get_saddr(struct net *net, const struct net_device *dst_dev,
++static int __ipv6_dev_get_saddr(struct net *net, const struct net_device *dst_dev,
+ const struct in6_addr *daddr, unsigned int prefs,
+ struct in6_addr *saddr)
+ {
+@@ -1217,7 +1217,6 @@ try_nextdev:
+ in6_ifa_put(hiscore->ifa);
+ return 0;
+ }
+-EXPORT_SYMBOL(ipv6_dev_get_saddr);
+
+ int ipv6_get_lladdr(struct net_device *dev, struct in6_addr *addr,
+ unsigned char banned_flags)
+@@ -4787,6 +4786,9 @@ int __init addrconf_init(void)
+
+ ipv6_addr_label_rtnl_register();
+
++ BUG_ON(ipv6_dev_get_saddr_hook != NULL);
++ rcu_assign_pointer(ipv6_dev_get_saddr_hook, __ipv6_dev_get_saddr);
++
+ return 0;
+ errout:
+ rtnl_af_unregister(&inet6_ops);
+@@ -4805,6 +4807,9 @@ void addrconf_cleanup(void)
+ struct net_device *dev;
+ int i;
+
++ rcu_assign_pointer(ipv6_dev_get_saddr_hook, NULL);
++ synchronize_rcu();
++
+ unregister_netdevice_notifier(&ipv6_dev_notf);
+ unregister_pernet_subsys(&addrconf_ops);
+ ipv6_addr_label_cleanup();
+--- /dev/null
++++ b/net/ipv6/inet6_stubs.c
+@@ -0,0 +1,33 @@
++/*
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++#include <linux/export.h>
++#include <net/ipv6.h>
++
++int (*ipv6_dev_get_saddr_hook)(struct net *net, struct net_device *dev,
++ const struct in6_addr *daddr, unsigned int srcprefs,
++ struct in6_addr *saddr);
++
++EXPORT_SYMBOL(ipv6_dev_get_saddr_hook);
++
++int ipv6_dev_get_saddr(struct net *net, struct net_device *dst_dev,
++ const struct in6_addr *daddr, unsigned int prefs,
++ struct in6_addr *saddr)
++{
++ int ret = -EADDRNOTAVAIL;
++ typeof(ipv6_dev_get_saddr_hook) dev_get_saddr;
++
++ rcu_read_lock();
++ dev_get_saddr = rcu_dereference(ipv6_dev_get_saddr_hook);
++
++ if (dev_get_saddr)
++ ret = dev_get_saddr(net, dst_dev, daddr, prefs, saddr);
++
++ rcu_read_unlock();
++ return ret;
++}
++EXPORT_SYMBOL(ipv6_dev_get_saddr);
++
--- /dev/null
+--- a/net/bridge/br_forward.c
++++ b/net/bridge/br_forward.c
+@@ -56,7 +56,7 @@ int br_dev_queue_push_xmit(struct sk_buf
+
+ int br_forward_finish(struct sk_buff *skb)
+ {
+- return NF_HOOK(NFPROTO_BRIDGE, NF_BR_POST_ROUTING, skb, NULL, skb->dev,
++ return BR_HOOK(NFPROTO_BRIDGE, NF_BR_POST_ROUTING, skb, NULL, skb->dev,
+ br_dev_queue_push_xmit);
+
+ }
+@@ -75,7 +75,7 @@ static void __br_deliver(const struct ne
+ return;
+ }
+
+- NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev,
++ BR_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev,
+ br_forward_finish);
+ }
+
+@@ -92,7 +92,7 @@ static void __br_forward(const struct ne
+ skb->dev = to->dev;
+ skb_forward_csum(skb);
+
+- NF_HOOK(NFPROTO_BRIDGE, NF_BR_FORWARD, skb, indev, skb->dev,
++ BR_HOOK(NFPROTO_BRIDGE, NF_BR_FORWARD, skb, indev, skb->dev,
+ br_forward_finish);
+ }
+
+--- a/net/bridge/br_input.c
++++ b/net/bridge/br_input.c
+@@ -40,7 +40,7 @@ static int br_pass_frame_up(struct sk_bu
+ indev = skb->dev;
+ skb->dev = brdev;
+
+- return NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_IN, skb, indev, NULL,
++ return BR_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_IN, skb, indev, NULL,
+ netif_receive_skb);
+ }
+
+@@ -199,7 +199,7 @@ rx_handler_result_t br_handle_frame(stru
+ }
+
+ /* Deliver packet to local host only */
+- if (NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_IN, skb, skb->dev,
++ if (BR_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_IN, skb, skb->dev,
+ NULL, br_handle_local_finish)) {
+ return RX_HANDLER_CONSUMED; /* consumed by filter */
+ } else {
+@@ -224,7 +224,7 @@ forward:
+ if (ether_addr_equal(p->br->dev->dev_addr, dest))
+ skb->pkt_type = PACKET_HOST;
+
+- NF_HOOK(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING, skb, skb->dev, NULL,
++ BR_HOOK(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING, skb, skb->dev, NULL,
+ br_handle_frame_finish);
+ break;
+ default:
+--- a/net/bridge/br_multicast.c
++++ b/net/bridge/br_multicast.c
+@@ -770,7 +770,7 @@ static void __br_multicast_send_query(st
+ if (port) {
+ __skb_push(skb, sizeof(struct ethhdr));
+ skb->dev = port->dev;
+- NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev,
++ BR_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev,
+ dev_queue_xmit);
+ } else
+ netif_rx(skb);
+--- a/net/bridge/br_netfilter.c
++++ b/net/bridge/br_netfilter.c
+@@ -73,6 +73,15 @@ static int brnf_pass_vlan_indev __read_m
+ #define IS_ARP(skb) \
+ (!vlan_tx_tag_present(skb) && skb->protocol == htons(ETH_P_ARP))
+
++int brnf_call_ebtables __read_mostly = 0;
++EXPORT_SYMBOL_GPL(brnf_call_ebtables);
++
++bool br_netfilter_run_hooks(void)
++{
++ return brnf_call_iptables | brnf_call_ip6tables | brnf_call_arptables |
++ brnf_call_ebtables;
++}
++
+ static inline __be16 vlan_proto(const struct sk_buff *skb)
+ {
+ if (vlan_tx_tag_present(skb))
+--- a/net/bridge/br_private.h
++++ b/net/bridge/br_private.h
+@@ -497,15 +497,29 @@ static inline bool br_multicast_is_route
+
+ /* br_netfilter.c */
+ #ifdef CONFIG_BRIDGE_NETFILTER
++extern int brnf_call_ebtables;
+ extern int br_netfilter_init(void);
+ extern void br_netfilter_fini(void);
+ extern void br_netfilter_rtable_init(struct net_bridge *);
++extern bool br_netfilter_run_hooks(void);
+ #else
+ #define br_netfilter_init() (0)
+ #define br_netfilter_fini() do { } while(0)
+ #define br_netfilter_rtable_init(x)
++#define br_netfilter_run_hooks() false
+ #endif
+
++static inline int
++BR_HOOK(uint8_t pf, unsigned int hook, struct sk_buff *skb,
++ struct net_device *in, struct net_device *out,
++ int (*okfn)(struct sk_buff *))
++{
++ if (!br_netfilter_run_hooks())
++ return okfn(skb);
++
++ return NF_HOOK(pf, hook, skb, in, out, okfn);
++}
++
+ /* br_stp.c */
+ extern void br_log_state(const struct net_bridge_port *p);
+ extern struct net_bridge_port *br_get_port(struct net_bridge *br,
+--- a/net/bridge/br_stp_bpdu.c
++++ b/net/bridge/br_stp_bpdu.c
+@@ -52,7 +52,7 @@ static void br_send_bpdu(struct net_brid
+
+ skb_reset_mac_header(skb);
+
+- NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev,
++ BR_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev,
+ dev_queue_xmit);
+ }
+
+--- a/net/bridge/netfilter/ebtables.c
++++ b/net/bridge/netfilter/ebtables.c
+@@ -2403,11 +2403,13 @@ static int __init ebtables_init(void)
+ }
+
+ printk(KERN_INFO "Ebtables v2.0 registered\n");
++ brnf_call_ebtables = 1;
+ return 0;
+ }
+
+ static void __exit ebtables_fini(void)
+ {
++ brnf_call_ebtables = 0;
+ nf_unregister_sockopt(&ebt_sockopts);
+ xt_unregister_target(&ebt_standard_target);
+ printk(KERN_INFO "Ebtables v2.0 unregistered\n");
--- /dev/null
+--- a/drivers/net/ppp/pppoe.c
++++ b/drivers/net/ppp/pppoe.c
+@@ -850,7 +850,7 @@ static int pppoe_sendmsg(struct kiocb *i
+ goto end;
+
+
+- skb = sock_wmalloc(sk, total_len + dev->hard_header_len + 32,
++ skb = sock_wmalloc(sk, total_len + dev->hard_header_len + 32 + NET_SKB_PAD,
+ 0, GFP_KERNEL);
+ if (!skb) {
+ error = -ENOMEM;
+@@ -858,7 +858,7 @@ static int pppoe_sendmsg(struct kiocb *i
+ }
+
+ /* Reserve space for headers. */
+- skb_reserve(skb, dev->hard_header_len);
++ skb_reserve(skb, dev->hard_header_len + NET_SKB_PAD);
+ skb_reset_network_header(skb);
+
+ skb->dev = dev;
--- /dev/null
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -134,7 +134,7 @@ static inline bool dev_xmit_complete(int
+ */
+
+ #if defined(CONFIG_WLAN) || IS_ENABLED(CONFIG_AX25)
+-# if defined(CONFIG_MAC80211_MESH)
++# if 1 || defined(CONFIG_MAC80211_MESH)
+ # define LL_MAX_HEADER 128
+ # else
+ # define LL_MAX_HEADER 96
--- /dev/null
+--- a/include/uapi/linux/atm.h
++++ b/include/uapi/linux/atm.h
+@@ -139,6 +139,9 @@ struct atm_trafprm {
+ int min_pcr; /* minimum PCR in cells per second */
+ int max_cdv; /* maximum CDV in microseconds */
+ int max_sdu; /* maximum SDU in bytes */
++ int scr; /* sustained rate in cells per second */
++ int mbs; /* maximum burst size (MBS) in cells */
++ int cdv; /* Cell delay varition */
+ /* extra params for ABR */
+ unsigned int icr; /* Initial Cell Rate (24-bit) */
+ unsigned int tbe; /* Transient Buffer Exposure (24-bit) */
--- /dev/null
+--- a/net/netlink/af_netlink.c
++++ b/net/netlink/af_netlink.c
+@@ -895,25 +895,7 @@ void netlink_detachskb(struct sock *sk,
+
+ static struct sk_buff *netlink_trim(struct sk_buff *skb, gfp_t allocation)
+ {
+- int delta;
+-
+ skb_orphan(skb);
+-
+- delta = skb->end - skb->tail;
+- if (delta * 2 < skb->truesize)
+- return skb;
+-
+- if (skb_shared(skb)) {
+- struct sk_buff *nskb = skb_clone(skb, allocation);
+- if (!nskb)
+- return skb;
+- consume_skb(skb);
+- skb = nskb;
+- }
+-
+- if (!pskb_expand_head(skb, 0, -delta, allocation))
+- skb->truesize -= delta;
+-
+ return skb;
+ }
+
--- /dev/null
+--- a/include/linux/skbuff.h
++++ b/include/linux/skbuff.h
+@@ -1626,7 +1626,7 @@ static inline int pskb_network_may_pull(
+ * NET_IP_ALIGN(2) + ethernet_header(14) + IP_header(20/40) + ports(8)
+ */
+ #ifndef NET_SKB_PAD
+-#define NET_SKB_PAD max(32, L1_CACHE_BYTES)
++#define NET_SKB_PAD max(48, L1_CACHE_BYTES)
+ #endif
+
+ extern int ___pskb_trim(struct sk_buff *skb, unsigned int len);
--- /dev/null
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -13,6 +13,16 @@ menuconfig PHYLIB
+
+ if PHYLIB
+
++config SWCONFIG
++ tristate "Switch configuration API"
++ ---help---
++ Switch configuration API using netlink. This allows
++ you to configure the VLAN features of certain switches.
++
++config SWCONFIG_LEDS
++ bool "Switch LED trigger support"
++ depends on (SWCONFIG && LEDS_TRIGGERS)
++
+ comment "MII PHY device drivers"
+
+ config AT803X_PHY
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -3,6 +3,7 @@
+ libphy-objs := phy.o phy_device.o mdio_bus.o
+
+ obj-$(CONFIG_PHYLIB) += libphy.o
++obj-$(CONFIG_SWCONFIG) += swconfig.o
+ obj-$(CONFIG_MARVELL_PHY) += marvell.o
+ obj-$(CONFIG_DAVICOM_PHY) += davicom.o
+ obj-$(CONFIG_CICADA_PHY) += cicada.o
--- /dev/null
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -301,6 +301,50 @@ int phy_ethtool_gset(struct phy_device *
+ }
+ EXPORT_SYMBOL(phy_ethtool_gset);
+
++int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr)
++{
++ u32 cmd;
++ int tmp;
++ struct ethtool_cmd ecmd = { ETHTOOL_GSET };
++ struct ethtool_value edata = { ETHTOOL_GLINK };
++
++ if (get_user(cmd, (u32 *) useraddr))
++ return -EFAULT;
++
++ switch (cmd) {
++ case ETHTOOL_GSET:
++ phy_ethtool_gset(phydev, &ecmd);
++ if (copy_to_user(useraddr, &ecmd, sizeof(ecmd)))
++ return -EFAULT;
++ return 0;
++
++ case ETHTOOL_SSET:
++ if (copy_from_user(&ecmd, useraddr, sizeof(ecmd)))
++ return -EFAULT;
++ return phy_ethtool_sset(phydev, &ecmd);
++
++ case ETHTOOL_NWAY_RST:
++ /* if autoneg is off, it's an error */
++ tmp = phy_read(phydev, MII_BMCR);
++ if (tmp & BMCR_ANENABLE) {
++ tmp |= (BMCR_ANRESTART);
++ phy_write(phydev, MII_BMCR, tmp);
++ return 0;
++ }
++ return -EINVAL;
++
++ case ETHTOOL_GLINK:
++ edata.data = (phy_read(phydev,
++ MII_BMSR) & BMSR_LSTATUS) ? 1 : 0;
++ if (copy_to_user(useraddr, &edata, sizeof(edata)))
++ return -EFAULT;
++ return 0;
++ }
++
++ return -EOPNOTSUPP;
++}
++EXPORT_SYMBOL(phy_ethtool_ioctl);
++
+ /**
+ * phy_mii_ioctl - generic PHY MII ioctl interface
+ * @phydev: the phy_device struct
+@@ -476,7 +520,7 @@ static void phy_force_reduction(struct p
+ int idx;
+
+ idx = phy_find_setting(phydev->speed, phydev->duplex);
+-
++
+ idx++;
+
+ idx = phy_find_valid(idx, phydev->supported);
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -542,6 +542,7 @@ void phy_start_machine(struct phy_device
+ void phy_stop_machine(struct phy_device *phydev);
+ int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
+ int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
++int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr);
+ int phy_mii_ioctl(struct phy_device *phydev,
+ struct ifreq *ifr, int cmd);
+ int phy_start_interrupts(struct phy_device *phydev);
--- /dev/null
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -408,9 +408,18 @@ struct phy_driver {
+ */
+ int (*config_aneg)(struct phy_device *phydev);
+
++ /* Determine if autonegotiation is done */
++ int (*aneg_done)(struct phy_device *phydev);
++
+ /* Determines the negotiated speed and duplex */
+ int (*read_status)(struct phy_device *phydev);
+
++ /*
++ * Update the value in phydev->link to reflect the
++ * current link value
++ */
++ int (*update_link)(struct phy_device *phydev);
++
+ /* Clears any pending interrupts */
+ int (*ack_interrupt)(struct phy_device *phydev);
+
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -796,6 +796,9 @@ int genphy_update_link(struct phy_device
+ {
+ int status;
+
++ if (phydev->drv->update_link)
++ return phydev->drv->update_link(phydev);
++
+ /* Do a fake read */
+ status = phy_read(phydev, MII_BMSR);
+
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -108,6 +108,9 @@ static inline int phy_aneg_done(struct p
+ {
+ int retval;
+
++ if (phydev->drv->aneg_done)
++ return phydev->drv->aneg_done(phydev);
++
+ retval = phy_read(phydev, MII_BMSR);
+
+ return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE);
--- /dev/null
+--- a/drivers/net/phy/mdio_bus.c
++++ b/drivers/net/phy/mdio_bus.c
+@@ -41,6 +41,8 @@
+ #include <asm/irq.h>
+ #include <asm/uaccess.h>
+
++#include "mdio-boardinfo.h"
++
+ /**
+ * mdiobus_alloc_size - allocate a mii_bus structure
+ * @size: extra amount of memory to allocate for private storage.
+@@ -229,15 +231,33 @@ void mdiobus_free(struct mii_bus *bus)
+ }
+ EXPORT_SYMBOL(mdiobus_free);
+
++static void mdiobus_setup_phydev_from_boardinfo(struct mii_bus *bus,
++ struct phy_device *phydev,
++ struct mdio_board_info *bi)
++{
++ if (strcmp(bus->id, bi->bus_id) ||
++ bi->phy_addr != phydev->addr)
++ return;
++
++ phydev->dev.platform_data = (void *) bi->platform_data;
++}
++
+ struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr)
+ {
+ struct phy_device *phydev;
++ struct mdio_board_entry *be;
+ int err;
+
+ phydev = get_phy_device(bus, addr, false);
+ if (IS_ERR(phydev) || phydev == NULL)
+ return phydev;
+
++ mutex_lock(&__mdio_board_lock);
++ list_for_each_entry(be, &__mdio_board_list, list)
++ mdiobus_setup_phydev_from_boardinfo(bus, phydev,
++ &be->board_info);
++ mutex_unlock(&__mdio_board_lock);
++
+ err = phy_device_register(phydev);
+ if (err) {
+ phy_device_free(phydev);
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -575,4 +575,22 @@ int __init mdio_bus_init(void);
+ void mdio_bus_exit(void);
+
+ extern struct bus_type mdio_bus_type;
++
++struct mdio_board_info {
++ const char *bus_id;
++ int phy_addr;
++
++ const void *platform_data;
++};
++
++#ifdef CONFIG_MDIO_BOARDINFO
++int mdiobus_register_board_info(const struct mdio_board_info *info, unsigned n);
++#else
++static inline int
++mdiobus_register_board_info(const struct mdio_board_info *info, unsigned n)
++{
++ return 0;
++}
++#endif
++
+ #endif /* __PHY_H */
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -13,6 +13,10 @@ menuconfig PHYLIB
+
+ if PHYLIB
+
++config MDIO_BOARDINFO
++ bool
++ default y
++
+ config SWCONFIG
+ tristate "Switch configuration API"
+ ---help---
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -2,6 +2,8 @@
+
+ libphy-objs := phy.o phy_device.o mdio_bus.o
+
++obj-$(CONFIG_MDIO_BOARDINFO) += mdio-boardinfo.o
++
+ obj-$(CONFIG_PHYLIB) += libphy.o
+ obj-$(CONFIG_SWCONFIG) += swconfig.o
+ obj-$(CONFIG_MARVELL_PHY) += marvell.o
+--- /dev/null
++++ b/drivers/net/phy/mdio-boardinfo.c
+@@ -0,0 +1,58 @@
++/*
++ * mdio-boardinfo.c - collect pre-declarations of PHY devices
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/phy.h>
++#include <linux/slab.h>
++#include <linux/export.h>
++#include <linux/mutex.h>
++#include <linux/phy.h>
++
++#include "mdio-boardinfo.h"
++
++/*
++ * These symbols are exported ONLY FOR the mdio_bus component.
++ * No other users will be supported.
++ */
++
++LIST_HEAD(__mdio_board_list);
++EXPORT_SYMBOL_GPL(__mdio_board_list);
++
++DEFINE_MUTEX(__mdio_board_lock);
++EXPORT_SYMBOL_GPL(__mdio_board_lock);
++
++/**
++ * mdio_register_board_info - register PHY devices for a given board
++ * @info: array of chip descriptors
++ * @n: how many descriptors are provided
++ * Context: can sleep
++ *
++ * The board info passed can safely be __initdata ... but be careful of
++ * any embedded pointers (platform_data, etc), they're copied as-is.
++ */
++int __init
++mdiobus_register_board_info(struct mdio_board_info const *info, unsigned n)
++{
++ struct mdio_board_entry *be;
++ int i;
++
++ be = kzalloc(n * sizeof(*be), GFP_KERNEL);
++ if (!be)
++ return -ENOMEM;
++
++ for (i = 0; i < n; i++, be++, info++) {
++ memcpy(&be->board_info, info, sizeof(*info));
++ mutex_lock(&__mdio_board_lock);
++ list_add_tail(&be->list, &__mdio_board_list);
++ mutex_unlock(&__mdio_board_lock);
++ }
++
++ return 0;
++}
+--- /dev/null
++++ b/drivers/net/phy/mdio-boardinfo.h
+@@ -0,0 +1,22 @@
++/*
++ * mdio-boardinfo.h - boardinfo interface internal to the mdio_bus component
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ */
++
++#include <linux/mutex.h>
++
++struct mdio_board_entry {
++ struct list_head list;
++ struct mdio_board_info board_info;
++};
++
++/* __mdio_board_lock protects __mdio_board_list
++ * only mdio_bus components are allowed to use these symbols.
++ */
++extern struct mutex __mdio_board_lock;
++extern struct list_head __mdio_board_list;
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -15,7 +15,7 @@ obj-$(CONFIG_MII) += mii.o
+ obj-$(CONFIG_MDIO) += mdio.o
+ obj-$(CONFIG_NET) += Space.o loopback.o
+ obj-$(CONFIG_NETCONSOLE) += netconsole.o
+-obj-$(CONFIG_PHYLIB) += phy/
++obj-y += phy/
+ obj-$(CONFIG_RIONET) += rionet.o
+ obj-$(CONFIG_NET_TEAM) += team/
+ obj-$(CONFIG_TUN) += tun.o
--- /dev/null
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -121,6 +121,13 @@ config MICREL_PHY
+ ---help---
+ Supports the KSZ9021, VSC8201, KS8001 PHYs.
+
++config ADM6996_PHY
++ tristate "Driver for ADM6996 switches"
++ select SWCONFIG
++ ---help---
++ Currently supports the ADM6996FC and ADM6996M switches.
++ Support for FC is very limited.
++
+ config FIXED_PHY
+ bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -17,6 +17,7 @@ obj-$(CONFIG_BROADCOM_PHY) += broadcom.o
+ obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o
+ obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o
+ obj-$(CONFIG_ICPLUS_PHY) += icplus.o
++obj-$(CONFIG_ADM6996_PHY) += adm6996.o
+ obj-$(CONFIG_REALTEK_PHY) += realtek.o
+ obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
+ obj-$(CONFIG_FIXED_PHY) += fixed.o
--- /dev/null
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -1074,6 +1074,11 @@ struct net_device {
+ const struct net_device_ops *netdev_ops;
+ const struct ethtool_ops *ethtool_ops;
+
++#ifdef CONFIG_ETHERNET_PACKET_MANGLE
++ void (*eth_mangle_rx)(struct net_device *dev, struct sk_buff *skb);
++ struct sk_buff *(*eth_mangle_tx)(struct net_device *dev, struct sk_buff *skb);
++#endif
++
+ /* Hardware header description */
+ const struct header_ops *header_ops;
+
+@@ -1130,6 +1135,9 @@ struct net_device {
+ void *ax25_ptr; /* AX.25 specific data */
+ struct wireless_dev *ieee80211_ptr; /* IEEE 802.11 specific data,
+ assign before registering */
++#ifdef CONFIG_ETHERNET_PACKET_MANGLE
++ void *phy_ptr; /* PHY device specific data */
++#endif
+
+ /*
+ * Cache lines mostly used on receive path (including eth_type_trans())
+--- a/include/uapi/linux/if.h
++++ b/include/uapi/linux/if.h
+@@ -83,6 +83,7 @@
+ #define IFF_SUPP_NOFCS 0x80000 /* device supports sending custom FCS */
+ #define IFF_LIVE_ADDR_CHANGE 0x100000 /* device supports hardware address
+ * change when it's running */
++#define IFF_NO_IP_ALIGN 0x200000 /* do not ip-align allocated rx pkts */
+
+
+ #define IF_GET_IFACE 0x0001 /* for querying only */
+--- a/include/linux/skbuff.h
++++ b/include/linux/skbuff.h
+@@ -1656,6 +1656,10 @@ static inline int pskb_trim(struct sk_bu
+ return (len < skb->len) ? __pskb_trim(skb, len) : 0;
+ }
+
++extern struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
++ unsigned int length, gfp_t gfp);
++
++
+ /**
+ * pskb_trim_unique - remove end from a paged unique (not cloned) buffer
+ * @skb: buffer to alter
+@@ -1758,16 +1762,6 @@ static inline struct sk_buff *dev_alloc_
+ }
+
+
+-static inline struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
+- unsigned int length, gfp_t gfp)
+-{
+- struct sk_buff *skb = __netdev_alloc_skb(dev, length + NET_IP_ALIGN, gfp);
+-
+- if (NET_IP_ALIGN && skb)
+- skb_reserve(skb, NET_IP_ALIGN);
+- return skb;
+-}
+-
+ static inline struct sk_buff *netdev_alloc_skb_ip_align(struct net_device *dev,
+ unsigned int length)
+ {
+--- a/net/Kconfig
++++ b/net/Kconfig
+@@ -23,6 +23,12 @@ menuconfig NET
+
+ if NET
+
++config ETHERNET_PACKET_MANGLE
++ bool
++ help
++ This option can be selected by phy drivers that need to mangle
++ packets going in or out of an ethernet device.
++
+ config WANT_COMPAT_NETLINK_MESSAGES
+ bool
+ help
+--- a/net/core/dev.c
++++ b/net/core/dev.c
+@@ -2263,9 +2263,19 @@ int dev_hard_start_xmit(struct sk_buff *
+ if (!list_empty(&ptype_all))
+ dev_queue_xmit_nit(skb, dev);
+
+- skb_len = skb->len;
+- rc = ops->ndo_start_xmit(skb, dev);
+- trace_net_dev_xmit(skb, rc, dev, skb_len);
++#ifdef CONFIG_ETHERNET_PACKET_MANGLE
++ if (!dev->eth_mangle_tx ||
++ (skb = dev->eth_mangle_tx(dev, skb)) != NULL)
++#else
++ if (1)
++#endif
++ {
++ skb_len = skb->len;
++ rc = ops->ndo_start_xmit(skb, dev);
++ trace_net_dev_xmit(skb, rc, dev, skb_len);
++ } else {
++ rc = NETDEV_TX_OK;
++ }
+ if (rc == NETDEV_TX_OK)
+ txq_trans_update(txq);
+ return rc;
+@@ -2288,9 +2298,19 @@ gso:
+ if (!list_empty(&ptype_all))
+ dev_queue_xmit_nit(nskb, dev);
+
+- skb_len = nskb->len;
+- rc = ops->ndo_start_xmit(nskb, dev);
+- trace_net_dev_xmit(nskb, rc, dev, skb_len);
++#ifdef CONFIG_ETHERNET_PACKET_MANGLE
++ if (!dev->eth_mangle_tx ||
++ (nskb = dev->eth_mangle_tx(dev, nskb)) != NULL)
++#else
++ if (1)
++#endif
++ {
++ skb_len = nskb->len;
++ rc = ops->ndo_start_xmit(nskb, dev);
++ trace_net_dev_xmit(nskb, rc, dev, skb_len);
++ } else {
++ rc = NETDEV_TX_OK;
++ }
+ if (unlikely(rc != NETDEV_TX_OK)) {
+ if (rc & ~NETDEV_TX_MASK)
+ goto out_kfree_gso_skb;
+--- a/net/core/skbuff.c
++++ b/net/core/skbuff.c
+@@ -60,6 +60,7 @@
+ #include <linux/scatterlist.h>
+ #include <linux/errqueue.h>
+ #include <linux/prefetch.h>
++#include <linux/if.h>
+
+ #include <net/protocol.h>
+ #include <net/dst.h>
+@@ -455,6 +456,22 @@ struct sk_buff *__netdev_alloc_skb(struc
+ }
+ EXPORT_SYMBOL(__netdev_alloc_skb);
+
++struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
++ unsigned int length, gfp_t gfp)
++{
++ struct sk_buff *skb = __netdev_alloc_skb(dev, length + NET_IP_ALIGN, gfp);
++
++#ifdef CONFIG_ETHERNET_PACKET_MANGLE
++ if (dev->priv_flags & IFF_NO_IP_ALIGN)
++ return skb;
++#endif
++
++ if (NET_IP_ALIGN && skb)
++ skb_reserve(skb, NET_IP_ALIGN);
++ return skb;
++}
++EXPORT_SYMBOL(__netdev_alloc_skb_ip_align);
++
+ void skb_add_rx_frag(struct sk_buff *skb, int i, struct page *page, int off,
+ int size, unsigned int truesize)
+ {
+--- a/net/ethernet/eth.c
++++ b/net/ethernet/eth.c
+@@ -159,6 +159,12 @@ __be16 eth_type_trans(struct sk_buff *sk
+ struct ethhdr *eth;
+
+ skb->dev = dev;
++
++#ifdef CONFIG_ETHERNET_PACKET_MANGLE
++ if (dev->eth_mangle_rx)
++ dev->eth_mangle_rx(dev, skb);
++#endif
++
+ skb_reset_mac_header(skb);
+ skb_pull_inline(skb, ETH_HLEN);
+ eth = eth_hdr(skb);
--- /dev/null
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -128,6 +128,10 @@ config ADM6996_PHY
+ Currently supports the ADM6996FC and ADM6996M switches.
+ Support for FC is very limited.
+
++config MVSWITCH_PHY
++ tristate "Driver for Marvell 88E6060 switches"
++ select ETHERNET_PACKET_MANGLE
++
+ config FIXED_PHY
+ bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -18,6 +18,7 @@ obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o
+ obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o
+ obj-$(CONFIG_ICPLUS_PHY) += icplus.o
+ obj-$(CONFIG_ADM6996_PHY) += adm6996.o
++obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
+ obj-$(CONFIG_REALTEK_PHY) += realtek.o
+ obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
+ obj-$(CONFIG_FIXED_PHY) += fixed.o
--- /dev/null
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -132,6 +132,10 @@ config MVSWITCH_PHY
+ tristate "Driver for Marvell 88E6060 switches"
+ select ETHERNET_PACKET_MANGLE
+
++config IP17XX_PHY
++ tristate "Driver for IC+ IP17xx switches"
++ select SWCONFIG
++
+ config FIXED_PHY
+ bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -19,6 +19,7 @@ obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o
+ obj-$(CONFIG_ICPLUS_PHY) += icplus.o
+ obj-$(CONFIG_ADM6996_PHY) += adm6996.o
+ obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
++obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
+ obj-$(CONFIG_REALTEK_PHY) += realtek.o
+ obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
+ obj-$(CONFIG_FIXED_PHY) += fixed.o
--- /dev/null
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -136,6 +136,11 @@ config IP17XX_PHY
+ tristate "Driver for IC+ IP17xx switches"
+ select SWCONFIG
+
++config AR8216_PHY
++ tristate "Driver for Atheros AR8216 switches"
++ select ETHERNET_PACKET_MANGLE
++ select SWCONFIG
++
+ config FIXED_PHY
+ bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -21,6 +21,7 @@ obj-$(CONFIG_ADM6996_PHY) += adm6996.o
+ obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
+ obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
+ obj-$(CONFIG_REALTEK_PHY) += realtek.o
++obj-$(CONFIG_AR8216_PHY) += ar8216.o
+ obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
+ obj-$(CONFIG_FIXED_PHY) += fixed.o
+ obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
--- /dev/null
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -141,6 +141,10 @@ config AR8216_PHY
+ select ETHERNET_PACKET_MANGLE
+ select SWCONFIG
+
++config RTL8306_PHY
++ tristate "Driver for Realtek RTL8306S switches"
++ select SWCONFIG
++
+ config FIXED_PHY
+ bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -22,6 +22,7 @@ obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
+ obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
+ obj-$(CONFIG_REALTEK_PHY) += realtek.o
+ obj-$(CONFIG_AR8216_PHY) += ar8216.o
++obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
+ obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
+ obj-$(CONFIG_FIXED_PHY) += fixed.o
+ obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
--- /dev/null
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -215,6 +215,30 @@ config MDIO_BUS_MUX_MMIOREG
+
+ Currently, only 8-bit registers are supported.
+
++config RTL8366_SMI
++ tristate "Driver for the RTL8366 SMI interface"
++ depends on GENERIC_GPIO
++ ---help---
++ This module implements the SMI interface protocol which is used
++ by some RTL8366 ethernet switch devices via the generic GPIO API.
++
++if RTL8366_SMI
++
++config RTL8366_SMI_DEBUG_FS
++ bool "RTL8366 SMI interface debugfs support"
++ depends on DEBUG_FS
++ default n
++
++config RTL8366S_PHY
++ tristate "Driver for the Realtek RTL8366S switch"
++ select SWCONFIG
++
++config RTL8366RB_PHY
++ tristate "Driver for the Realtek RTL8366RB switch"
++ select SWCONFIG
++
++endif # RTL8366_SMI
++
+ endif # PHYLIB
+
+ config MICREL_KS8995MA
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -23,6 +23,9 @@ obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
+ obj-$(CONFIG_REALTEK_PHY) += realtek.o
+ obj-$(CONFIG_AR8216_PHY) += ar8216.o
+ obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
++obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o
++obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o
++obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o
+ obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
+ obj-$(CONFIG_FIXED_PHY) += fixed.o
+ obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
--- /dev/null
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -237,6 +237,10 @@ config RTL8366RB_PHY
+ tristate "Driver for the Realtek RTL8366RB switch"
+ select SWCONFIG
+
++config RTL8367_PHY
++ tristate "Driver for the Realtek RTL8367R/M switches"
++ select SWCONFIG
++
+ endif # RTL8366_SMI
+
+ endif # PHYLIB
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -26,6 +26,7 @@ obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
+ obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o
+ obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o
+ obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o
++obj-$(CONFIG_RTL8367_PHY) += rtl8367.o
+ obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
+ obj-$(CONFIG_FIXED_PHY) += fixed.o
+ obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
--- /dev/null
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -145,6 +145,11 @@ config RTL8306_PHY
+ tristate "Driver for Realtek RTL8306S switches"
+ select SWCONFIG
+
++config MICREL_PHY
++ tristate "Drivers for Micrel/Kendin PHYs"
++ ---help---
++ Currently has a driver for the KSZ8041
++
+ config FIXED_PHY
+ bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -28,6 +28,7 @@ obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o
+ obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o
+ obj-$(CONFIG_RTL8367_PHY) += rtl8367.o
+ obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
++obj-$(CONFIG_MICREL_PHY) += micrel.o
+ obj-$(CONFIG_FIXED_PHY) += fixed.o
+ obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
+ obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
--- /dev/null
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -246,6 +246,10 @@ config RTL8367_PHY
+ tristate "Driver for the Realtek RTL8367R/M switches"
+ select SWCONFIG
+
++config RTL8367B_PHY
++ tristate "Driver fot the Realtek RTL8367R-VB switch"
++ select SWCONFIG
++
+ endif # RTL8366_SMI
+
+ endif # PHYLIB
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -27,6 +27,7 @@ obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi
+ obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o
+ obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o
+ obj-$(CONFIG_RTL8367_PHY) += rtl8367.o
++obj-$(CONFIG_RTL8367B_PHY) += rtl8367b.o
+ obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
+ obj-$(CONFIG_MICREL_PHY) += micrel.o
+ obj-$(CONFIG_FIXED_PHY) += fixed.o
--- /dev/null
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -257,3 +257,8 @@ endif # PHYLIB
+ config MICREL_KS8995MA
+ tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
+ depends on SPI
++
++config PSB6970_PHY
++ tristate "Lantiq XWAY Tantos (PSB6970) Ethernet switch"
++ select SWCONFIG
++ select ETHERNET_PACKET_MANGLE
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -30,6 +30,7 @@ obj-$(CONFIG_RTL8367_PHY) += rtl8367.o
+ obj-$(CONFIG_RTL8367B_PHY) += rtl8367b.o
+ obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
+ obj-$(CONFIG_MICREL_PHY) += micrel.o
++obj-$(CONFIG_PSB6970_PHY) += psb6970.o
+ obj-$(CONFIG_FIXED_PHY) += fixed.o
+ obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
+ obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
--- /dev/null
+--- a/drivers/net/wireless/hostap/hostap_ap.c
++++ b/drivers/net/wireless/hostap/hostap_ap.c
+@@ -2340,13 +2340,13 @@ int prism2_ap_get_sta_qual(local_info_t
+ addr[count].sa_family = ARPHRD_ETHER;
+ memcpy(addr[count].sa_data, sta->addr, ETH_ALEN);
+ if (sta->last_rx_silence == 0)
+- qual[count].qual = sta->last_rx_signal < 27 ?
+- 0 : (sta->last_rx_signal - 27) * 92 / 127;
++ qual[count].qual = (sta->last_rx_signal - 156) == 0 ?
++ 0 : (sta->last_rx_signal - 156) * 92 / 64;
+ else
+- qual[count].qual = sta->last_rx_signal -
+- sta->last_rx_silence - 35;
+- qual[count].level = HFA384X_LEVEL_TO_dBm(sta->last_rx_signal);
+- qual[count].noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence);
++ qual[count].qual = (sta->last_rx_signal -
++ sta->last_rx_silence) * 92 / 64;
++ qual[count].level = sta->last_rx_signal;
++ qual[count].noise = sta->last_rx_silence;
+ qual[count].updated = sta->last_rx_updated;
+
+ sta->last_rx_updated = IW_QUAL_DBM;
+@@ -2412,13 +2412,13 @@ int prism2_ap_translate_scan(struct net_
+ memset(&iwe, 0, sizeof(iwe));
+ iwe.cmd = IWEVQUAL;
+ if (sta->last_rx_silence == 0)
+- iwe.u.qual.qual = sta->last_rx_signal < 27 ?
+- 0 : (sta->last_rx_signal - 27) * 92 / 127;
++ iwe.u.qual.qual = (sta->last_rx_signal -156) == 0 ?
++ 0 : (sta->last_rx_signal - 156) * 92 / 64;
+ else
+- iwe.u.qual.qual = sta->last_rx_signal -
+- sta->last_rx_silence - 35;
+- iwe.u.qual.level = HFA384X_LEVEL_TO_dBm(sta->last_rx_signal);
+- iwe.u.qual.noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence);
++ iwe.u.qual.qual = (sta->last_rx_signal -
++ sta->last_rx_silence) * 92 / 64;
++ iwe.u.qual.level = sta->last_rx_signal;
++ iwe.u.qual.noise = sta->last_rx_silence;
+ iwe.u.qual.updated = sta->last_rx_updated;
+ iwe.len = IW_EV_QUAL_LEN;
+ current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+--- a/drivers/net/wireless/hostap/hostap_config.h
++++ b/drivers/net/wireless/hostap/hostap_config.h
+@@ -45,4 +45,9 @@
+ */
+ /* #define PRISM2_NO_STATION_MODES */
+
++/* Enable TX power Setting functions
++ * (min att = -128 , max att = 127)
++ */
++#define RAW_TXPOWER_SETTING
++
+ #endif /* HOSTAP_CONFIG_H */
+--- a/drivers/net/wireless/hostap/hostap.h
++++ b/drivers/net/wireless/hostap/hostap.h
+@@ -90,6 +90,7 @@ extern const struct iw_handler_def hosta
+ extern const struct ethtool_ops prism2_ethtool_ops;
+
+ int hostap_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
++int hostap_restore_power(struct net_device *dev);
+
+
+ #endif /* HOSTAP_H */
+--- a/drivers/net/wireless/hostap/hostap_hw.c
++++ b/drivers/net/wireless/hostap/hostap_hw.c
+@@ -928,6 +928,7 @@ static int hfa384x_set_rid(struct net_de
+ prism2_hw_reset(dev);
+ }
+
++ hostap_restore_power(dev);
+ return res;
+ }
+
+--- a/drivers/net/wireless/hostap/hostap_info.c
++++ b/drivers/net/wireless/hostap/hostap_info.c
+@@ -435,6 +435,11 @@ static void handle_info_queue_linkstatus
+ }
+
+ /* Get BSSID if we have a valid AP address */
++
++ if ( val == HFA384X_LINKSTATUS_CONNECTED ||
++ val == HFA384X_LINKSTATUS_DISCONNECTED )
++ hostap_restore_power(local->dev);
++
+ if (connected) {
+ netif_carrier_on(local->dev);
+ netif_carrier_on(local->ddev);
+--- a/drivers/net/wireless/hostap/hostap_ioctl.c
++++ b/drivers/net/wireless/hostap/hostap_ioctl.c
+@@ -1479,23 +1479,20 @@ static int prism2_txpower_hfa386x_to_dBm
+ val = 255;
+
+ tmp = val;
+- tmp >>= 2;
+
+- return -12 - tmp;
++ return tmp;
+ }
+
+ static u16 prism2_txpower_dBm_to_hfa386x(int val)
+ {
+ signed char tmp;
+
+- if (val > 20)
+- return 128;
+- else if (val < -43)
++ if (val > 127)
+ return 127;
++ else if (val < -128)
++ return 128;
+
+ tmp = val;
+- tmp = -12 - tmp;
+- tmp <<= 2;
+
+ return (unsigned char) tmp;
+ }
+@@ -4052,3 +4049,35 @@ int hostap_ioctl(struct net_device *dev,
+
+ return ret;
+ }
++
++/* BUG FIX: Restore power setting value when lost due to F/W bug */
++
++int hostap_restore_power(struct net_device *dev)
++{
++ struct hostap_interface *iface = netdev_priv(dev);
++ local_info_t *local = iface->local;
++
++ u16 val;
++ int ret = 0;
++
++ if (local->txpower_type == PRISM2_TXPOWER_OFF) {
++ val = 0xff; /* use all standby and sleep modes */
++ ret = local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF,
++ HFA386X_CR_A_D_TEST_MODES2,
++ &val, NULL);
++ }
++
++#ifdef RAW_TXPOWER_SETTING
++ if (local->txpower_type == PRISM2_TXPOWER_FIXED) {
++ val = HFA384X_TEST_CFG_BIT_ALC;
++ local->func->cmd(dev, HFA384X_CMDCODE_TEST |
++ (HFA384X_TEST_CFG_BITS << 8), 0, &val, NULL);
++ val = prism2_txpower_dBm_to_hfa386x(local->txpower);
++ ret = (local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF,
++ HFA386X_CR_MANUAL_TX_POWER, &val, NULL));
++ }
++#endif /* RAW_TXPOWER_SETTING */
++ return (ret ? -EOPNOTSUPP : 0);
++}
++
++EXPORT_SYMBOL(hostap_restore_power);
--- /dev/null
+--- a/drivers/pci/Kconfig
++++ b/drivers/pci/Kconfig
+@@ -63,6 +63,12 @@ config XEN_PCIDEV_FRONTEND
+ The PCI device frontend driver allows the kernel to import arbitrary
+ PCI devices from a PCI backend to support PCI driver domains.
+
++config PCI_DISABLE_COMMON_QUIRKS
++ bool "PCI disable common quirks"
++ depends on PCI
++ help
++ If you don't know what to do here, say N.
++
+ config HT_IRQ
+ bool "Interrupts on hypertransport devices"
+ default y
+--- a/drivers/pci/quirks.c
++++ b/drivers/pci/quirks.c
+@@ -44,6 +44,7 @@ static void __devinit quirk_mmio_always_
+ DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on);
+
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
+ /* The Mellanox Tavor device gives false positive parity errors
+ * Mark this device with a broken_parity_status, to allow
+ * PCI scanning code to "skip" this now blacklisted device.
+@@ -1933,7 +1934,9 @@ static void __devinit fixup_rev1_53c810(
+ }
+ }
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
++#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
+
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
+ /* Enable 1k I/O space granularity on the Intel P64H2 */
+ static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
+ {
+@@ -2605,6 +2608,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AT
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1083,
+ quirk_msi_intx_disable_bug);
+ #endif /* CONFIG_PCI_MSI */
++#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
+
+ /* Allow manual resource allocation for PCI hotplug bridges
+ * via pci=hpmemsize=nnM and pci=hpiosize=nnM parameters. For
--- /dev/null
+
+--- a/drivers/usb/host/pci-quirks.c
++++ b/drivers/usb/host/pci-quirks.c
+@@ -434,6 +434,8 @@ reset_needed:
+ }
+ EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
+
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
++
+ static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
+ {
+ u16 cmd;
+@@ -971,3 +973,4 @@ static void __devinit quirk_usb_early_ha
+ }
+ DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_SERIAL_USB, 8, quirk_usb_early_handoff);
++#endif
--- /dev/null
+--- a/drivers/usb/core/usb.c
++++ b/drivers/usb/core/usb.c
+@@ -653,6 +653,71 @@ int __usb_get_extra_descriptor(char *buf
+ }
+ EXPORT_SYMBOL_GPL(__usb_get_extra_descriptor);
+
++static struct usb_device *match_device_name(struct usb_device *dev,
++ const char *name)
++{
++ struct usb_device *ret_dev = NULL;
++ int child;
++
++ dev_dbg(&dev->dev, "check for name %s ...\n", name);
++
++ /* see if this device matches */
++ if (strcmp(dev_name(&dev->dev), name) == 0 ) {
++ dev_dbg(&dev->dev, "matched this device!\n");
++ ret_dev = usb_get_dev(dev);
++ goto exit;
++ }
++
++ /* look through all of the children of this device */
++ for (child = 0; child < dev->maxchild; ++child) {
++ if (dev->children[child]) {
++ usb_lock_device(dev->children[child]);
++ ret_dev = match_device_name(dev->children[child], name);
++ usb_unlock_device(dev->children[child]);
++ if (ret_dev)
++ goto exit;
++ }
++ }
++exit:
++ return ret_dev;
++}
++
++/**
++ * usb_find_device_by_name - find a specific usb device in the system
++ * @name: the name of the device to find
++ *
++ * Returns a pointer to a struct usb_device if such a specified usb
++ * device is present in the system currently. The usage count of the
++ * device will be incremented if a device is found. Make sure to call
++ * usb_put_dev() when the caller is finished with the device.
++ *
++ * If a device with the specified bus id is not found, NULL is returned.
++ */
++struct usb_device *usb_find_device_by_name(const char *name)
++{
++ struct list_head *buslist;
++ struct usb_bus *bus;
++ struct usb_device *dev = NULL;
++
++ mutex_lock(&usb_bus_list_lock);
++ for (buslist = usb_bus_list.next;
++ buslist != &usb_bus_list;
++ buslist = buslist->next) {
++ bus = container_of(buslist, struct usb_bus, bus_list);
++ if (!bus->root_hub)
++ continue;
++ usb_lock_device(bus->root_hub);
++ dev = match_device_name(bus->root_hub, name);
++ usb_unlock_device(bus->root_hub);
++ if (dev)
++ goto exit;
++ }
++exit:
++ mutex_unlock(&usb_bus_list_lock);
++ return dev;
++}
++EXPORT_SYMBOL_GPL(usb_find_device_by_name);
++
+ /**
+ * usb_alloc_coherent - allocate dma-consistent buffer for URB_NO_xxx_DMA_MAP
+ * @dev: device the buffer will be used with
+--- a/include/linux/usb.h
++++ b/include/linux/usb.h
+@@ -672,6 +672,7 @@ static inline bool usb_device_supports_l
+ return udev->bos->ss_cap->bmAttributes & USB_LTM_SUPPORT;
+ }
+
++extern struct usb_device *usb_find_device_by_name(const char *name);
+
+ /*-------------------------------------------------------------------------*/
+
--- /dev/null
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -559,4 +559,8 @@ config LEDS_TRIGGER_TRANSIENT
+ GPIO/PWM based hardware.
+ If unsure, say Y.
+
++config LEDS_TRIGGER_MORSE
++ tristate "LED Morse Trigger"
++ depends on LEDS_TRIGGERS
++
+ endif # NEW_LEDS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -65,3 +65,4 @@ obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledt
+ obj-$(CONFIG_LEDS_TRIGGER_CPU) += ledtrig-cpu.o
+ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
+ obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT) += ledtrig-transient.o
++obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o
+--- a/drivers/leds/ledtrig-morse.c
++++ b/drivers/leds/ledtrig-morse.c
+@@ -26,7 +26,6 @@
+ #include <linux/list.h>
+ #include <linux/spinlock.h>
+ #include <linux/device.h>
+-#include <linux/sysdev.h>
+ #include <linux/timer.h>
+ #include <linux/ctype.h>
+ #include <linux/leds.h>
--- /dev/null
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -563,4 +563,11 @@ config LEDS_TRIGGER_MORSE
+ tristate "LED Morse Trigger"
+ depends on LEDS_TRIGGERS
+
++config LEDS_TRIGGER_NETDEV
++ tristate "LED Netdev Trigger"
++ depends on NET && LEDS_TRIGGERS
++ help
++ This allows LEDs to be controlled by network device activity.
++ If unsure, say Y.
++
+ endif # NEW_LEDS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -66,3 +66,4 @@ obj-$(CONFIG_LEDS_TRIGGER_CPU) += ledtr
+ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
+ obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT) += ledtrig-transient.o
+ obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o
++obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o
+--- a/drivers/leds/ledtrig-netdev.c
++++ b/drivers/leds/ledtrig-netdev.c
+@@ -22,7 +22,6 @@
+ #include <linux/list.h>
+ #include <linux/spinlock.h>
+ #include <linux/device.h>
+-#include <linux/sysdev.h>
+ #include <linux/netdevice.h>
+ #include <linux/timer.h>
+ #include <linux/ctype.h>
+@@ -307,8 +306,9 @@ done:
+ static void netdev_trig_timer(unsigned long arg)
+ {
+ struct led_netdev_data *trigger_data = (struct led_netdev_data *)arg;
+- const struct net_device_stats *dev_stats;
++ struct rtnl_link_stats64 *dev_stats;
+ unsigned new_activity;
++ struct rtnl_link_stats64 temp;
+
+ write_lock(&trigger_data->lock);
+
+@@ -318,7 +318,7 @@ static void netdev_trig_timer(unsigned l
+ goto no_restart;
+ }
+
+- dev_stats = dev_get_stats(trigger_data->net_dev);
++ dev_stats = dev_get_stats(trigger_data->net_dev, &temp);
+ new_activity =
+ ((trigger_data->mode & MODE_TX) ? dev_stats->tx_packets : 0) +
+ ((trigger_data->mode & MODE_RX) ? dev_stats->rx_packets : 0);
--- /dev/null
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -570,4 +570,11 @@ config LEDS_TRIGGER_NETDEV
+ This allows LEDs to be controlled by network device activity.
+ If unsure, say Y.
+
++config LEDS_TRIGGER_USBDEV
++ tristate "LED USB device Trigger"
++ depends on USB && LEDS_TRIGGERS
++ help
++ This allows LEDs to be controlled by the presence/activity of
++ an USB device. If unsure, say N.
++
+ endif # NEW_LEDS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -67,3 +67,4 @@ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) +=
+ obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT) += ledtrig-transient.o
+ obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o
+ obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o
++obj-$(CONFIG_LEDS_TRIGGER_USBDEV) += ledtrig-usbdev.o
+--- a/drivers/leds/ledtrig-usbdev.c
++++ b/drivers/leds/ledtrig-usbdev.c
+@@ -24,7 +24,6 @@
+ #include <linux/list.h>
+ #include <linux/spinlock.h>
+ #include <linux/device.h>
+-#include <linux/sysdev.h>
+ #include <linux/timer.h>
+ #include <linux/ctype.h>
+ #include <linux/slab.h>
--- /dev/null
+--- a/drivers/rtc/Kconfig
++++ b/drivers/rtc/Kconfig
+@@ -754,6 +754,15 @@ config RTC_DRV_NUC900
+ If you say yes here you get support for the RTC subsystem of the
+ NUC910/NUC920 used in embedded systems.
+
++config RTC_DRV_RTC7301
++ tristate "Epson RTC-7301 SF/DG"
++ help
++ If you say Y here you will get support for the
++ Epson RTC-7301 SF/DG RTC chips.
++
++ This driver can also be built as a module. If so, the module
++ will be called rtc-7301.
++
+ comment "on-CPU RTC drivers"
+
+ config RTC_DRV_DAVINCI
+--- a/drivers/rtc/Makefile
++++ b/drivers/rtc/Makefile
+@@ -92,6 +92,7 @@ obj-$(CONFIG_RTC_DRV_RP5C01) += rtc-rp5c
+ obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o
+ obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o
+ obj-$(CONFIG_RTC_DRV_RS5C372) += rtc-rs5c372.o
++obj-$(CONFIG_RTC_DRV_RTC7301) += rtc-rtc7301.o
+ obj-$(CONFIG_RTC_DRV_RV3029C2) += rtc-rv3029c2.o
+ obj-$(CONFIG_RTC_DRV_RX8025) += rtc-rx8025.o
+ obj-$(CONFIG_RTC_DRV_RX8581) += rtc-rx8581.o
+--- /dev/null
++++ b/drivers/rtc/rtc-rtc7301.c
+@@ -0,0 +1,219 @@
++/*
++ * Driver for Epson RTC-7301SF/DG
++ *
++ * Copyright (C) 2009 Jose Vasconcellos
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/rtc.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/delay.h>
++#include <linux/bcd.h>
++
++#define RTC_NAME "rtc7301"
++#define RTC_VERSION "0.1"
++
++/* Epson RTC-7301 register addresses */
++#define RTC7301_SEC 0x00
++#define RTC7301_SEC10 0x01
++#define RTC7301_MIN 0x02
++#define RTC7301_MIN10 0x03
++#define RTC7301_HOUR 0x04
++#define RTC7301_HOUR10 0x05
++#define RTC7301_WEEKDAY 0x06
++#define RTC7301_DAY 0x07
++#define RTC7301_DAY10 0x08
++#define RTC7301_MON 0x09
++#define RTC7301_MON10 0x0A
++#define RTC7301_YEAR 0x0B
++#define RTC7301_YEAR10 0x0C
++#define RTC7301_YEAR100 0x0D
++#define RTC7301_YEAR1000 0x0E
++#define RTC7301_CTRLREG 0x0F
++
++static uint8_t __iomem *rtc7301_base;
++
++#define read_reg(offset) (readb(rtc7301_base + offset) & 0xf)
++#define write_reg(offset, data) writeb(data, rtc7301_base + (offset))
++
++#define rtc7301_isbusy() (read_reg(RTC7301_CTRLREG) & 1)
++
++static void rtc7301_init_settings(void)
++{
++ int i;
++
++ write_reg(RTC7301_CTRLREG, 2);
++ write_reg(RTC7301_YEAR1000, 2);
++ udelay(122);
++
++ /* bank 1 */
++ write_reg(RTC7301_CTRLREG, 6);
++ for (i=0; i<15; i++)
++ write_reg(i, 0);
++
++ /* bank 2 */
++ write_reg(RTC7301_CTRLREG, 14);
++ for (i=0; i<15; i++)
++ write_reg(i, 0);
++ write_reg(RTC7301_CTRLREG, 0);
++}
++
++static int rtc7301_get_datetime(struct device *dev, struct rtc_time *dt)
++{
++ int cnt;
++ uint8_t buf[16];
++
++ cnt = 0;
++ while (rtc7301_isbusy()) {
++ udelay(244);
++ if (cnt++ > 100) {
++ dev_err(dev, "%s: timeout error %x\n", __func__, rtc7301_base[RTC7301_CTRLREG]);
++ return -EIO;
++ }
++ }
++
++ for (cnt=0; cnt<16; cnt++)
++ buf[cnt] = read_reg(cnt);
++
++ if (buf[RTC7301_SEC10] & 8) {
++ dev_err(dev, "%s: RTC not set\n", __func__);
++ return -EINVAL;
++ }
++
++ memset(dt, 0, sizeof(*dt));
++
++ dt->tm_sec = buf[RTC7301_SEC] + buf[RTC7301_SEC10]*10;
++ dt->tm_min = buf[RTC7301_MIN] + buf[RTC7301_MIN10]*10;
++ dt->tm_hour = buf[RTC7301_HOUR] + buf[RTC7301_HOUR10]*10;
++
++ dt->tm_mday = buf[RTC7301_DAY] + buf[RTC7301_DAY10]*10;
++ dt->tm_mon = buf[RTC7301_MON] + buf[RTC7301_MON10]*10 - 1;
++ dt->tm_year = buf[RTC7301_YEAR] + buf[RTC7301_YEAR10]*10 +
++ buf[RTC7301_YEAR100]*100 +
++ ((buf[RTC7301_YEAR1000] & 3)*1000) - 1900;
++
++ /* the rtc device may contain illegal values on power up
++ * according to the data sheet. make sure they are valid.
++ */
++
++ return rtc_valid_tm(dt);
++}
++
++static int rtc7301_set_datetime(struct device *dev, struct rtc_time *dt)
++{
++ int data;
++
++ data = dt->tm_year + 1900;
++ if (data >= 2100 || data < 1900)
++ return -EINVAL;
++
++ write_reg(RTC7301_CTRLREG, 2);
++ udelay(122);
++
++ data = bin2bcd(dt->tm_sec);
++ write_reg(RTC7301_SEC, data);
++ write_reg(RTC7301_SEC10, (data >> 4));
++
++ data = bin2bcd(dt->tm_min);
++ write_reg(RTC7301_MIN, data );
++ write_reg(RTC7301_MIN10, (data >> 4));
++
++ data = bin2bcd(dt->tm_hour);
++ write_reg(RTC7301_HOUR, data);
++ write_reg(RTC7301_HOUR10, (data >> 4));
++
++ data = bin2bcd(dt->tm_mday);
++ write_reg(RTC7301_DAY, data);
++ write_reg(RTC7301_DAY10, (data>> 4));
++
++ data = bin2bcd(dt->tm_mon + 1);
++ write_reg(RTC7301_MON, data);
++ write_reg(RTC7301_MON10, (data >> 4));
++
++ data = bin2bcd(dt->tm_year % 100);
++ write_reg(RTC7301_YEAR, data);
++ write_reg(RTC7301_YEAR10, (data >> 4));
++ data = bin2bcd((1900 + dt->tm_year) / 100);
++ write_reg(RTC7301_YEAR100, data);
++
++ data = bin2bcd(dt->tm_wday);
++ write_reg(RTC7301_WEEKDAY, data);
++
++ write_reg(RTC7301_CTRLREG, 0);
++
++ return 0;
++}
++
++static const struct rtc_class_ops rtc7301_rtc_ops = {
++ .read_time = rtc7301_get_datetime,
++ .set_time = rtc7301_set_datetime,
++};
++
++static int __devinit rtc7301_probe(struct platform_device *pdev)
++{
++ struct rtc_device *rtc;
++ struct resource *res;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res)
++ return -ENOENT;
++
++ rtc7301_base = ioremap_nocache(res->start, 0x1000 /*res->end - res->start + 1*/);
++ if (!rtc7301_base)
++ return -EINVAL;
++
++ rtc = rtc_device_register(RTC_NAME, &pdev->dev,
++ &rtc7301_rtc_ops, THIS_MODULE);
++ if (IS_ERR(rtc)) {
++ iounmap(rtc7301_base);
++ return PTR_ERR(rtc);
++ }
++
++ platform_set_drvdata(pdev, rtc);
++
++ rtc7301_init_settings();
++ return 0;
++}
++
++static int __devexit rtc7301_remove(struct platform_device *pdev)
++{
++ struct rtc_device *rtc = platform_get_drvdata(pdev);
++
++ if (rtc)
++ rtc_device_unregister(rtc);
++ if (rtc7301_base)
++ iounmap(rtc7301_base);
++ return 0;
++}
++
++static struct platform_driver rtc7301_driver = {
++ .driver = {
++ .name = RTC_NAME,
++ .owner = THIS_MODULE,
++ },
++ .probe = rtc7301_probe,
++ .remove = __devexit_p(rtc7301_remove),
++};
++
++static __init int rtc7301_init(void)
++{
++ return platform_driver_register(&rtc7301_driver);
++}
++module_init(rtc7301_init);
++
++static __exit void rtc7301_exit(void)
++{
++ platform_driver_unregister(&rtc7301_driver);
++}
++module_exit(rtc7301_exit);
++
++MODULE_DESCRIPTION("Epson 7301 RTC driver");
++MODULE_AUTHOR("Jose Vasconcellos <jvasco@verizon.net>");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:" RTC_NAME);
++MODULE_VERSION(RTC_VERSION);
--- /dev/null
+--- a/drivers/rtc/Kconfig
++++ b/drivers/rtc/Kconfig
+@@ -419,6 +419,15 @@ config RTC_DRV_RV3029C2
+ This driver can also be built as a module. If so, the module
+ will be called rtc-rv3029c2.
+
++config RTC_DRV_PT7C4338
++ tristate "Pericom Technology Inc. PT7C4338 RTC"
++ help
++ If you say yes here you get support for the Pericom Technology
++ Inc. PT7C4338 RTC chip.
++
++ This driver can also be built as a module. If so, the module
++ will be called rtc-pt7c4338.
++
+ endif # I2C
+
+ comment "SPI RTC drivers"
+--- a/drivers/rtc/Makefile
++++ b/drivers/rtc/Makefile
+@@ -84,6 +84,7 @@ obj-$(CONFIG_RTC_DRV_PL030) += rtc-pl030
+ obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o
+ obj-$(CONFIG_RTC_DRV_PM8XXX) += rtc-pm8xxx.o
+ obj-$(CONFIG_RTC_DRV_PS3) += rtc-ps3.o
++obj-$(CONFIG_RTC_DRV_PT7C4338) += rtc-pt7c4338.o
+ obj-$(CONFIG_RTC_DRV_PUV3) += rtc-puv3.o
+ obj-$(CONFIG_RTC_DRV_PXA) += rtc-pxa.o
+ obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o
+--- /dev/null
++++ b/drivers/rtc/rtc-pt7c4338.c
+@@ -0,0 +1,216 @@
++/*
++ * Copyright 2010 Freescale Semiconductor, Inc.
++ *
++ * Author: Priyanka Jain <Priyanka.Jain@freescale.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++/*
++ * This file provides Date & Time support (no alarms) for PT7C4338 chip.
++ *
++ * This file is based on drivers/rtc/rtc-ds1307.c
++ *
++ * PT7C4338 chip is manufactured by Pericom Technology Inc.
++ * It is a serial real-time clock which provides
++ * 1)Low-power clock/calendar.
++ * 2)Programmable square-wave output.
++ * It has 56 bytes of nonvolatile RAM.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/i2c.h>
++#include <linux/rtc.h>
++#include <linux/bcd.h>
++
++/* RTC register addresses */
++#define PT7C4338_REG_SECONDS 0x00
++#define PT7C4338_REG_MINUTES 0x01
++#define PT7C4338_REG_HOURS 0x02
++#define PT7C4338_REG_AMPM 0x02
++#define PT7C4338_REG_DAY 0x03
++#define PT7C4338_REG_DATE 0x04
++#define PT7C4338_REG_MONTH 0x05
++#define PT7C4338_REG_YEAR 0x06
++#define PT7C4338_REG_CTRL_STAT 0x07
++
++/* RTC second register address bit */
++#define PT7C4338_SEC_BIT_CH 0x80 /*Clock Halt (in Register 0)*/
++
++/* RTC control and status register bits */
++#define PT7C4338_CTRL_STAT_BIT_RS0 0x1 /*Rate select 0*/
++#define PT7C4338_CTRL_STAT_BIT_RS1 0x2 /*Rate select 1*/
++#define PT7C4338_CTRL_STAT_BIT_SQWE 0x10 /*Square Wave Enable*/
++#define PT7C4338_CTRL_STAT_BIT_OSF 0x20 /*Oscillator Stop Flag*/
++#define PT7C4338_CTRL_STAT_BIT_OUT 0x80 /*Output Level Control*/
++
++static const struct i2c_device_id pt7c4338_id[] = {
++ { "pt7c4338", 0 },
++ { }
++};
++MODULE_DEVICE_TABLE(i2c, pt7c4338_id);
++
++struct pt7c4338{
++ struct i2c_client *client;
++ struct rtc_device *rtc;
++};
++
++static int pt7c4338_read_time(struct device *dev, struct rtc_time *time)
++{
++ struct i2c_client *client = to_i2c_client(dev);
++ int ret;
++ u8 buf[7];
++ u8 year, month, day, hour, minute, second;
++ u8 week, twelve_hr, am_pm;
++
++ ret = i2c_smbus_read_i2c_block_data(client,
++ PT7C4338_REG_SECONDS, 7, buf);
++ if (ret < 0)
++ return ret;
++ if (ret < 7)
++ return -EIO;
++
++ second = buf[0];
++ minute = buf[1];
++ hour = buf[2];
++ week = buf[3];
++ day = buf[4];
++ month = buf[5];
++ year = buf[6];
++
++ /* Extract additional information for AM/PM */
++ twelve_hr = hour & 0x40;
++ am_pm = hour & 0x20;
++
++ /* Write to rtc_time structure */
++ time->tm_sec = bcd2bin(second & 0x7f);
++ time->tm_min = bcd2bin(minute & 0x7f);
++ if (twelve_hr) {
++ /* Convert to 24 hr */
++ if (am_pm)
++ time->tm_hour = bcd2bin(hour & 0x10) + 12;
++ else
++ time->tm_hour = bcd2bin(hour & 0xBF);
++ } else {
++ time->tm_hour = bcd2bin(hour);
++ }
++
++ time->tm_wday = bcd2bin(week & 0x07) - 1;
++ time->tm_mday = bcd2bin(day & 0x3f);
++ time->tm_mon = bcd2bin(month & 0x1F) - 1;
++ /* assume 20YY not 19YY */
++ time->tm_year = bcd2bin(year) + 100;
++
++ return 0;
++}
++
++static int pt7c4338_set_time(struct device *dev, struct rtc_time *time)
++{
++ struct i2c_client *client = to_i2c_client(dev);
++ u8 buf[7];
++
++ /* Extract time from rtc_time and load into pt7c4338*/
++ buf[0] = bin2bcd(time->tm_sec);
++ buf[1] = bin2bcd(time->tm_min);
++ buf[2] = bin2bcd(time->tm_hour);
++ buf[3] = bin2bcd(time->tm_wday + 1); /* Day of the week */
++ buf[4] = bin2bcd(time->tm_mday); /* Date */
++ buf[5] = bin2bcd(time->tm_mon + 1);
++
++ /* assume 20YY not 19YY */
++ if (time->tm_year >= 100)
++ buf[6] = bin2bcd(time->tm_year - 100);
++ else
++ buf[6] = bin2bcd(time->tm_year);
++
++ return i2c_smbus_write_i2c_block_data(client,
++ PT7C4338_REG_SECONDS, 7, buf);
++}
++
++static const struct rtc_class_ops pt7c4338_rtc_ops = {
++ .read_time = pt7c4338_read_time,
++ .set_time = pt7c4338_set_time,
++};
++
++static int pt7c4338_probe(struct i2c_client *client,
++ const struct i2c_device_id *id)
++{
++ struct pt7c4338 *pt7c4338;
++ struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
++ int ret;
++
++ pt7c4338 = kzalloc(sizeof(struct pt7c4338), GFP_KERNEL);
++ if (!pt7c4338)
++ return -ENOMEM;
++
++ pt7c4338->client = client;
++ i2c_set_clientdata(client, pt7c4338);
++ pt7c4338->rtc = rtc_device_register(client->name, &client->dev,
++ &pt7c4338_rtc_ops, THIS_MODULE);
++ if (IS_ERR(pt7c4338->rtc)) {
++ ret = PTR_ERR(pt7c4338->rtc);
++ dev_err(&client->dev, "unable to register the class device\n");
++ goto out_free;
++ }
++
++ return 0;
++out_free:
++ i2c_set_clientdata(client, NULL);
++ kfree(pt7c4338);
++ return ret;
++}
++
++static int __devexit pt7c4338_remove(struct i2c_client *client)
++{
++ struct pt7c4338 *pt7c4338 = i2c_get_clientdata(client);
++
++ rtc_device_unregister(pt7c4338->rtc);
++ i2c_set_clientdata(client, NULL);
++ kfree(pt7c4338);
++ return 0;
++}
++
++static struct i2c_driver pt7c4338_driver = {
++ .driver = {
++ .name = "rtc-pt7c4338",
++ .owner = THIS_MODULE,
++ },
++ .probe = pt7c4338_probe,
++ .remove = __devexit_p(pt7c4338_remove),
++ .id_table = pt7c4338_id,
++};
++
++static int __init pt7c4338_init(void)
++{
++ return i2c_add_driver(&pt7c4338_driver);
++}
++
++static void __exit pt7c4338_exit(void)
++{
++ i2c_del_driver(&pt7c4338_driver);
++}
++
++module_init(pt7c4338_init);
++module_exit(pt7c4338_exit);
++
++MODULE_AUTHOR("Priyanka Jain <Priyanka.Jain@freescale.com>");
++MODULE_DESCRIPTION("pericom Technology Inc. PT7C4338 RTC Driver");
++MODULE_LICENSE("GPL");
--- /dev/null
+--- a/include/uapi/linux/fb.h
++++ b/include/uapi/linux/fb.h
+@@ -122,6 +122,7 @@
+ #define FB_ACCEL_TRIDENT_BLADE3D 52 /* Trident Blade3D */
+ #define FB_ACCEL_TRIDENT_BLADEXP 53 /* Trident BladeXP */
+ #define FB_ACCEL_CIRRUS_ALPINE 53 /* Cirrus Logic 543x/544x/5480 */
++#define FB_ACCEL_GLAMO 50 /* SMedia Glamo */
+ #define FB_ACCEL_NEOMAGIC_NM2070 90 /* NeoMagic NM2070 */
+ #define FB_ACCEL_NEOMAGIC_NM2090 91 /* NeoMagic NM2090 */
+ #define FB_ACCEL_NEOMAGIC_NM2093 92 /* NeoMagic NM2093 */
+--- a/include/uapi/linux/Kbuild
++++ b/include/uapi/linux/Kbuild
+@@ -130,6 +130,8 @@ header-y += gen_stats.h
+ header-y += genetlink.h
+ header-y += gfs2_ondisk.h
+ header-y += gigaset_dev.h
++header-y += glamofb.h
++header-y += glamo-engine.h
+ header-y += hdlc.h
+ header-y += hdlcdrv.h
+ header-y += hdreg.h
--- /dev/null
+Implement the SPI-GPIO delay function for busses that need speed limitation.
+
+--mb
+
+
+
+--- a/drivers/spi/spi-gpio.c
++++ b/drivers/spi/spi-gpio.c
+@@ -22,6 +22,7 @@
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
+ #include <linux/gpio.h>
++#include <linux/delay.h>
+ #include <linux/of_device.h>
+ #include <linux/of_gpio.h>
+
+@@ -73,6 +74,7 @@ struct spi_gpio {
+ * #define SPI_MOSI_GPIO 120
+ * #define SPI_SCK_GPIO 121
+ * #define SPI_N_CHIPSEL 4
++ * #undef NEED_SPIDELAY
+ * #include "spi-gpio.c"
+ */
+
+@@ -80,6 +82,7 @@ struct spi_gpio {
+ #define DRIVER_NAME "spi_gpio"
+
+ #define GENERIC_BITBANG /* vs tight inlines */
++#define NEED_SPIDELAY 1
+
+ /* all functions referencing these symbols must define pdata */
+ #define SPI_MISO_GPIO ((pdata)->miso)
+@@ -130,12 +133,20 @@ static inline int getmiso(const struct s
+ #undef pdata
+
+ /*
+- * NOTE: this clocks "as fast as we can". It "should" be a function of the
+- * requested device clock. Software overhead means we usually have trouble
+- * reaching even one Mbit/sec (except when we can inline bitops), so for now
+- * we'll just assume we never need additional per-bit slowdowns.
++ * NOTE: to clock "as fast as we can", set spi_device.max_speed_hz
++ * and spi_transfer.speed_hz to 0.
++ * Otherwise this is a function of the requested device clock.
++ * Software overhead means we usually have trouble
++ * reaching even one Mbit/sec (except when we can inline bitops). So on small
++ * embedded devices with fast SPI slaves you usually don't need a delay.
+ */
+-#define spidelay(nsecs) do {} while (0)
++static inline void spidelay(unsigned nsecs)
++{
++#ifdef NEED_SPIDELAY
++ if (unlikely(nsecs))
++ ndelay(nsecs);
++#endif /* NEED_SPIDELAY */
++}
+
+ #include "spi-bitbang-txrx.h"
+
--- /dev/null
+THIS CODE IS DEPRECATED.
+
+Please use the new mainline SPI-GPIO driver, as of 2.6.29.
+
+--mb
+
+
+
+---
+ drivers/spi/Kconfig | 9 +
+ drivers/spi/Makefile | 1
+ drivers/spi/spi_gpio_old.c | 251 +++++++++++++++++++++++++++++++++++++++
+ include/linux/spi/spi_gpio_old.h | 73 +++++++++++
+ 4 files changed, 334 insertions(+)
+
+--- /dev/null
++++ b/include/linux/spi/spi_gpio_old.h
+@@ -0,0 +1,73 @@
++/*
++ * spi_gpio interface to platform code
++ *
++ * Copyright (c) 2008 Piotr Skamruk
++ * Copyright (c) 2008 Michael Buesch
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef _LINUX_SPI_SPI_GPIO
++#define _LINUX_SPI_SPI_GPIO
++
++#include <linux/types.h>
++#include <linux/spi/spi.h>
++
++
++/**
++ * struct spi_gpio_platform_data - Data definitions for a SPI-GPIO device.
++ *
++ * This structure holds information about a GPIO-based SPI device.
++ *
++ * @pin_clk: The GPIO pin number of the CLOCK pin.
++ *
++ * @pin_miso: The GPIO pin number of the MISO pin.
++ *
++ * @pin_mosi: The GPIO pin number of the MOSI pin.
++ *
++ * @pin_cs: The GPIO pin number of the CHIPSELECT pin.
++ *
++ * @cs_activelow: If true, the chip is selected when the CS line is low.
++ *
++ * @no_spi_delay: If true, no delay is done in the lowlevel bitbanging.
++ * Note that doing no delay is not standards compliant,
++ * but it might be needed to speed up transfers on some
++ * slow embedded machines.
++ *
++ * @boardinfo_setup: This callback is called after the
++ * SPI master device was registered, but before the
++ * device is registered.
++ * @boardinfo_setup_data: Data argument passed to boardinfo_setup().
++ */
++struct spi_gpio_platform_data {
++ unsigned int pin_clk;
++ unsigned int pin_miso;
++ unsigned int pin_mosi;
++ unsigned int pin_cs;
++ bool cs_activelow;
++ bool no_spi_delay;
++ int (*boardinfo_setup)(struct spi_board_info *bi,
++ struct spi_master *master,
++ void *data);
++ void *boardinfo_setup_data;
++};
++
++/**
++ * SPI_GPIO_PLATDEV_NAME - The platform device name string.
++ *
++ * The name string that has to be used for platform_device_alloc
++ * when allocating a spi-gpio device.
++ */
++#define SPI_GPIO_PLATDEV_NAME "spi-gpio"
++
++/**
++ * spi_gpio_next_id - Get another platform device ID number.
++ *
++ * This returns the next platform device ID number that has to be used
++ * for platform_device_alloc. The ID is opaque and should not be used for
++ * anything else.
++ */
++int spi_gpio_next_id(void);
++
++#endif /* _LINUX_SPI_SPI_GPIO */
+--- /dev/null
++++ b/drivers/spi/spi_gpio_old.c
+@@ -0,0 +1,251 @@
++/*
++ * Bitbanging SPI bus driver using GPIO API
++ *
++ * Copyright (c) 2008 Piotr Skamruk
++ * Copyright (c) 2008 Michael Buesch
++ *
++ * based on spi_s3c2410_gpio.c
++ * Copyright (c) 2006 Ben Dooks
++ * Copyright (c) 2006 Simtec Electronics
++ * and on i2c-gpio.c
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/spinlock.h>
++#include <linux/workqueue.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
++#include <linux/spi/spi_gpio_old.h>
++#include <linux/gpio.h>
++#include <asm/atomic.h>
++
++
++struct spi_gpio {
++ struct spi_bitbang bitbang;
++ struct spi_gpio_platform_data *info;
++ struct platform_device *pdev;
++ struct spi_board_info bi;
++};
++
++
++static inline struct spi_gpio *spidev_to_sg(struct spi_device *dev)
++{
++ return dev->controller_data;
++}
++
++static inline void setsck(struct spi_device *dev, int val)
++{
++ struct spi_gpio *sp = spidev_to_sg(dev);
++ gpio_set_value(sp->info->pin_clk, val ? 1 : 0);
++}
++
++static inline void setmosi(struct spi_device *dev, int val)
++{
++ struct spi_gpio *sp = spidev_to_sg(dev);
++ gpio_set_value(sp->info->pin_mosi, val ? 1 : 0);
++}
++
++static inline u32 getmiso(struct spi_device *dev)
++{
++ struct spi_gpio *sp = spidev_to_sg(dev);
++ return gpio_get_value(sp->info->pin_miso) ? 1 : 0;
++}
++
++static inline void do_spidelay(struct spi_device *dev, unsigned nsecs)
++{
++ struct spi_gpio *sp = spidev_to_sg(dev);
++
++ if (!sp->info->no_spi_delay)
++ ndelay(nsecs);
++}
++
++#define spidelay(nsecs) do { \
++ /* Steal the spi_device pointer from our caller. \
++ * The bitbang-API should probably get fixed here... */ \
++ do_spidelay(spi, nsecs); \
++ } while (0)
++
++#define EXPAND_BITBANG_TXRX
++#include "spi-bitbang-txrx.h"
++
++static u32 spi_gpio_txrx_mode0(struct spi_device *spi,
++ unsigned nsecs, u32 word, u8 bits)
++{
++ return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits);
++}
++
++static u32 spi_gpio_txrx_mode1(struct spi_device *spi,
++ unsigned nsecs, u32 word, u8 bits)
++{
++ return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits);
++}
++
++static u32 spi_gpio_txrx_mode2(struct spi_device *spi,
++ unsigned nsecs, u32 word, u8 bits)
++{
++ return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits);
++}
++
++static u32 spi_gpio_txrx_mode3(struct spi_device *spi,
++ unsigned nsecs, u32 word, u8 bits)
++{
++ return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits);
++}
++
++static void spi_gpio_chipselect(struct spi_device *dev, int on)
++{
++ struct spi_gpio *sp = spidev_to_sg(dev);
++
++ if (sp->info->cs_activelow)
++ on = !on;
++ gpio_set_value(sp->info->pin_cs, on ? 1 : 0);
++}
++
++static int spi_gpio_probe(struct platform_device *pdev)
++{
++ struct spi_master *master;
++ struct spi_gpio_platform_data *pdata;
++ struct spi_gpio *sp;
++ struct spi_device *spidev;
++ int err;
++
++ pdata = pdev->dev.platform_data;
++ if (!pdata)
++ return -ENXIO;
++
++ err = -ENOMEM;
++ master = spi_alloc_master(&pdev->dev, sizeof(struct spi_gpio));
++ if (!master)
++ goto err_alloc_master;
++
++ sp = spi_master_get_devdata(master);
++ platform_set_drvdata(pdev, sp);
++ sp->info = pdata;
++
++ err = gpio_request(pdata->pin_clk, "spi_clock");
++ if (err)
++ goto err_request_clk;
++ err = gpio_request(pdata->pin_mosi, "spi_mosi");
++ if (err)
++ goto err_request_mosi;
++ err = gpio_request(pdata->pin_miso, "spi_miso");
++ if (err)
++ goto err_request_miso;
++ err = gpio_request(pdata->pin_cs, "spi_cs");
++ if (err)
++ goto err_request_cs;
++
++ sp->bitbang.master = spi_master_get(master);
++ sp->bitbang.master->bus_num = -1;
++ sp->bitbang.master->num_chipselect = 1;
++ sp->bitbang.chipselect = spi_gpio_chipselect;
++ sp->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_mode0;
++ sp->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_mode1;
++ sp->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_mode2;
++ sp->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_mode3;
++
++ gpio_direction_output(pdata->pin_clk, 0);
++ gpio_direction_output(pdata->pin_mosi, 0);
++ gpio_direction_output(pdata->pin_cs,
++ pdata->cs_activelow ? 1 : 0);
++ gpio_direction_input(pdata->pin_miso);
++
++ err = spi_bitbang_start(&sp->bitbang);
++ if (err)
++ goto err_no_bitbang;
++ err = pdata->boardinfo_setup(&sp->bi, master,
++ pdata->boardinfo_setup_data);
++ if (err)
++ goto err_bi_setup;
++ sp->bi.controller_data = sp;
++ spidev = spi_new_device(master, &sp->bi);
++ if (!spidev)
++ goto err_new_dev;
++
++ return 0;
++
++err_new_dev:
++err_bi_setup:
++ spi_bitbang_stop(&sp->bitbang);
++err_no_bitbang:
++ spi_master_put(sp->bitbang.master);
++ gpio_free(pdata->pin_cs);
++err_request_cs:
++ gpio_free(pdata->pin_miso);
++err_request_miso:
++ gpio_free(pdata->pin_mosi);
++err_request_mosi:
++ gpio_free(pdata->pin_clk);
++err_request_clk:
++ kfree(master);
++
++err_alloc_master:
++ return err;
++}
++
++static int __devexit spi_gpio_remove(struct platform_device *pdev)
++{
++ struct spi_gpio *sp;
++ struct spi_gpio_platform_data *pdata;
++
++ pdata = pdev->dev.platform_data;
++ sp = platform_get_drvdata(pdev);
++
++ gpio_free(pdata->pin_clk);
++ gpio_free(pdata->pin_mosi);
++ gpio_free(pdata->pin_miso);
++ gpio_free(pdata->pin_cs);
++ spi_bitbang_stop(&sp->bitbang);
++ spi_master_put(sp->bitbang.master);
++
++ return 0;
++}
++
++static struct platform_driver spi_gpio_driver = {
++ .driver = {
++ .name = SPI_GPIO_PLATDEV_NAME,
++ .owner = THIS_MODULE,
++ },
++ .probe = spi_gpio_probe,
++ .remove = __devexit_p(spi_gpio_remove),
++};
++
++int spi_gpio_next_id(void)
++{
++ static atomic_t counter = ATOMIC_INIT(-1);
++
++ return atomic_inc_return(&counter);
++}
++EXPORT_SYMBOL(spi_gpio_next_id);
++
++static int __init spi_gpio_init(void)
++{
++ int err;
++
++ err = platform_driver_register(&spi_gpio_driver);
++ if (err)
++ printk(KERN_ERR "spi-gpio: register failed: %d\n", err);
++
++ return err;
++}
++module_init(spi_gpio_init);
++
++static void __exit spi_gpio_exit(void)
++{
++ platform_driver_unregister(&spi_gpio_driver);
++}
++module_exit(spi_gpio_exit);
++
++MODULE_AUTHOR("Piot Skamruk <piotr.skamruk at gmail.com>");
++MODULE_AUTHOR("Michael Buesch");
++MODULE_DESCRIPTION("Platform independent GPIO bitbanging SPI driver");
++MODULE_LICENSE("GPL v2");
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -170,6 +170,15 @@ config SPI_GPIO
+ GPIO operations, you should be able to leverage that for better
+ speed with a custom version of this driver; see the source code.
+
++config SPI_GPIO_OLD
++ tristate "Old GPIO API based bitbanging SPI controller (DEPRECATED)"
++ depends on SPI_MASTER && GENERIC_GPIO
++ select SPI_BITBANG
++ help
++ This code is deprecated. Please use the new mainline SPI-GPIO driver.
++
++ If unsure, say N.
++
+ config SPI_IMX
+ tristate "Freescale i.MX SPI controllers"
+ depends on ARCH_MXC
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -31,6 +31,7 @@ obj-$(CONFIG_SPI_FSL_LIB) += spi-fsl-li
+ obj-$(CONFIG_SPI_FSL_ESPI) += spi-fsl-espi.o
+ obj-$(CONFIG_SPI_FSL_SPI) += spi-fsl-spi.o
+ obj-$(CONFIG_SPI_GPIO) += spi-gpio.o
++obj-$(CONFIG_SPI_GPIO_OLD) += spi_gpio_old.o
+ obj-$(CONFIG_SPI_IMX) += spi-imx.o
+ obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o
+ obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mpc512x-psc.o
--- /dev/null
+--- /dev/null
++++ b/drivers/mmc/host/gpiommc.c
+@@ -0,0 +1,609 @@
++/*
++ * Driver an MMC/SD card on a bitbanging GPIO SPI bus.
++ * This module hooks up the mmc_spi and spi_gpio modules and also
++ * provides a configfs interface.
++ *
++ * Copyright 2008 Michael Buesch <mb@bu3sch.de>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include <linux/module.h>
++#include <linux/mmc/gpiommc.h>
++#include <linux/platform_device.h>
++#include <linux/list.h>
++#include <linux/mutex.h>
++#include <linux/spi/spi_gpio_old.h>
++#include <linux/configfs.h>
++#include <linux/gpio.h>
++#include <asm/atomic.h>
++
++
++#define PFX "gpio-mmc: "
++
++
++struct gpiommc_device {
++ struct platform_device *pdev;
++ struct platform_device *spi_pdev;
++ struct spi_board_info boardinfo;
++};
++
++
++MODULE_DESCRIPTION("GPIO based MMC driver");
++MODULE_AUTHOR("Michael Buesch");
++MODULE_LICENSE("GPL");
++
++
++static int gpiommc_boardinfo_setup(struct spi_board_info *bi,
++ struct spi_master *master,
++ void *data)
++{
++ struct gpiommc_device *d = data;
++ struct gpiommc_platform_data *pdata = d->pdev->dev.platform_data;
++
++ /* Bind the SPI master to the MMC-SPI host driver. */
++ strlcpy(bi->modalias, "mmc_spi", sizeof(bi->modalias));
++
++ bi->max_speed_hz = pdata->max_bus_speed;
++ bi->bus_num = master->bus_num;
++ bi->mode = pdata->mode;
++
++ return 0;
++}
++
++static int gpiommc_probe(struct platform_device *pdev)
++{
++ struct gpiommc_platform_data *mmc_pdata = pdev->dev.platform_data;
++ struct spi_gpio_platform_data spi_pdata;
++ struct gpiommc_device *d;
++ int err;
++
++ err = -ENXIO;
++ if (!mmc_pdata)
++ goto error;
++
++#ifdef CONFIG_MMC_SPI_MODULE
++ err = request_module("mmc_spi");
++ if (err) {
++ printk(KERN_WARNING PFX
++ "Failed to request mmc_spi module.\n");
++ }
++#endif /* CONFIG_MMC_SPI_MODULE */
++
++ /* Allocate the GPIO-MMC device */
++ err = -ENOMEM;
++ d = kzalloc(sizeof(*d), GFP_KERNEL);
++ if (!d)
++ goto error;
++ d->pdev = pdev;
++
++ /* Create the SPI-GPIO device */
++ d->spi_pdev = platform_device_alloc(SPI_GPIO_PLATDEV_NAME,
++ spi_gpio_next_id());
++ if (!d->spi_pdev)
++ goto err_free_d;
++
++ memset(&spi_pdata, 0, sizeof(spi_pdata));
++ spi_pdata.pin_clk = mmc_pdata->pins.gpio_clk;
++ spi_pdata.pin_miso = mmc_pdata->pins.gpio_do;
++ spi_pdata.pin_mosi = mmc_pdata->pins.gpio_di;
++ spi_pdata.pin_cs = mmc_pdata->pins.gpio_cs;
++ spi_pdata.cs_activelow = mmc_pdata->pins.cs_activelow;
++ spi_pdata.no_spi_delay = mmc_pdata->no_spi_delay;
++ spi_pdata.boardinfo_setup = gpiommc_boardinfo_setup;
++ spi_pdata.boardinfo_setup_data = d;
++
++ err = platform_device_add_data(d->spi_pdev, &spi_pdata,
++ sizeof(spi_pdata));
++ if (err)
++ goto err_free_pdev;
++ err = platform_device_add(d->spi_pdev);
++ if (err)
++ goto err_free_pdata;
++ platform_set_drvdata(pdev, d);
++
++ printk(KERN_INFO PFX "MMC-Card \"%s\" "
++ "attached to GPIO pins di=%u, do=%u, clk=%u, cs=%u\n",
++ mmc_pdata->name, mmc_pdata->pins.gpio_di,
++ mmc_pdata->pins.gpio_do,
++ mmc_pdata->pins.gpio_clk,
++ mmc_pdata->pins.gpio_cs);
++
++ return 0;
++
++err_free_pdata:
++ kfree(d->spi_pdev->dev.platform_data);
++ d->spi_pdev->dev.platform_data = NULL;
++err_free_pdev:
++ platform_device_put(d->spi_pdev);
++err_free_d:
++ kfree(d);
++error:
++ return err;
++}
++
++static int gpiommc_remove(struct platform_device *pdev)
++{
++ struct gpiommc_device *d = platform_get_drvdata(pdev);
++ struct gpiommc_platform_data *pdata = d->pdev->dev.platform_data;
++
++ platform_device_unregister(d->spi_pdev);
++ printk(KERN_INFO PFX "GPIO based MMC-Card \"%s\" removed\n",
++ pdata->name);
++ platform_device_put(d->spi_pdev);
++
++ return 0;
++}
++
++#ifdef CONFIG_GPIOMMC_CONFIGFS
++
++/* A device that was created through configfs */
++struct gpiommc_configfs_device {
++ struct config_item item;
++ /* The platform device, after registration. */
++ struct platform_device *pdev;
++ /* The configuration */
++ struct gpiommc_platform_data pdata;
++};
++
++#define GPIO_INVALID -1
++
++static inline bool gpiommc_is_registered(struct gpiommc_configfs_device *dev)
++{
++ return (dev->pdev != NULL);
++}
++
++static inline struct gpiommc_configfs_device *ci_to_gpiommc(struct config_item *item)
++{
++ return item ? container_of(item, struct gpiommc_configfs_device, item) : NULL;
++}
++
++static struct configfs_attribute gpiommc_attr_DI = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "gpio_data_in",
++ .ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_DO = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "gpio_data_out",
++ .ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_CLK = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "gpio_clock",
++ .ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_CS = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "gpio_chipselect",
++ .ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_CS_activelow = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "gpio_chipselect_activelow",
++ .ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_spimode = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "spi_mode",
++ .ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_spidelay = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "spi_delay",
++ .ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_max_bus_speed = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "max_bus_speed",
++ .ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_register = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "register",
++ .ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute *gpiommc_config_attrs[] = {
++ &gpiommc_attr_DI,
++ &gpiommc_attr_DO,
++ &gpiommc_attr_CLK,
++ &gpiommc_attr_CS,
++ &gpiommc_attr_CS_activelow,
++ &gpiommc_attr_spimode,
++ &gpiommc_attr_spidelay,
++ &gpiommc_attr_max_bus_speed,
++ &gpiommc_attr_register,
++ NULL,
++};
++
++static ssize_t gpiommc_config_attr_show(struct config_item *item,
++ struct configfs_attribute *attr,
++ char *page)
++{
++ struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++ ssize_t count = 0;
++ unsigned int gpio;
++ int err = 0;
++
++ if (attr == &gpiommc_attr_DI) {
++ gpio = dev->pdata.pins.gpio_di;
++ if (gpio == GPIO_INVALID)
++ count = snprintf(page, PAGE_SIZE, "not configured\n");
++ else
++ count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++ goto out;
++ }
++ if (attr == &gpiommc_attr_DO) {
++ gpio = dev->pdata.pins.gpio_do;
++ if (gpio == GPIO_INVALID)
++ count = snprintf(page, PAGE_SIZE, "not configured\n");
++ else
++ count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++ goto out;
++ }
++ if (attr == &gpiommc_attr_CLK) {
++ gpio = dev->pdata.pins.gpio_clk;
++ if (gpio == GPIO_INVALID)
++ count = snprintf(page, PAGE_SIZE, "not configured\n");
++ else
++ count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++ goto out;
++ }
++ if (attr == &gpiommc_attr_CS) {
++ gpio = dev->pdata.pins.gpio_cs;
++ if (gpio == GPIO_INVALID)
++ count = snprintf(page, PAGE_SIZE, "not configured\n");
++ else
++ count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++ goto out;
++ }
++ if (attr == &gpiommc_attr_CS_activelow) {
++ count = snprintf(page, PAGE_SIZE, "%u\n",
++ dev->pdata.pins.cs_activelow);
++ goto out;
++ }
++ if (attr == &gpiommc_attr_spimode) {
++ count = snprintf(page, PAGE_SIZE, "%u\n",
++ dev->pdata.mode);
++ goto out;
++ }
++ if (attr == &gpiommc_attr_spidelay) {
++ count = snprintf(page, PAGE_SIZE, "%u\n",
++ !dev->pdata.no_spi_delay);
++ goto out;
++ }
++ if (attr == &gpiommc_attr_max_bus_speed) {
++ count = snprintf(page, PAGE_SIZE, "%u\n",
++ dev->pdata.max_bus_speed);
++ goto out;
++ }
++ if (attr == &gpiommc_attr_register) {
++ count = snprintf(page, PAGE_SIZE, "%u\n",
++ gpiommc_is_registered(dev));
++ goto out;
++ }
++ WARN_ON(1);
++ err = -ENOSYS;
++out:
++ return err ? err : count;
++}
++
++static int gpiommc_do_register(struct gpiommc_configfs_device *dev,
++ const char *name)
++{
++ int err;
++
++ if (gpiommc_is_registered(dev))
++ return 0;
++
++ if (!gpio_is_valid(dev->pdata.pins.gpio_di) ||
++ !gpio_is_valid(dev->pdata.pins.gpio_do) ||
++ !gpio_is_valid(dev->pdata.pins.gpio_clk) ||
++ !gpio_is_valid(dev->pdata.pins.gpio_cs)) {
++ printk(KERN_ERR PFX
++ "configfs: Invalid GPIO pin number(s)\n");
++ return -EINVAL;
++ }
++
++ strlcpy(dev->pdata.name, name,
++ sizeof(dev->pdata.name));
++
++ dev->pdev = platform_device_alloc(GPIOMMC_PLATDEV_NAME,
++ gpiommc_next_id());
++ if (!dev->pdev)
++ return -ENOMEM;
++ err = platform_device_add_data(dev->pdev, &dev->pdata,
++ sizeof(dev->pdata));
++ if (err) {
++ platform_device_put(dev->pdev);
++ return err;
++ }
++ err = platform_device_add(dev->pdev);
++ if (err) {
++ platform_device_put(dev->pdev);
++ return err;
++ }
++
++ return 0;
++}
++
++static void gpiommc_do_unregister(struct gpiommc_configfs_device *dev)
++{
++ if (!gpiommc_is_registered(dev))
++ return;
++
++ platform_device_unregister(dev->pdev);
++ dev->pdev = NULL;
++}
++
++static ssize_t gpiommc_config_attr_store(struct config_item *item,
++ struct configfs_attribute *attr,
++ const char *page, size_t count)
++{
++ struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++ int err = -EINVAL;
++ unsigned long data;
++
++ if (attr == &gpiommc_attr_register) {
++ err = strict_strtoul(page, 10, &data);
++ if (err)
++ goto out;
++ err = -EINVAL;
++ if (data == 1)
++ err = gpiommc_do_register(dev, item->ci_name);
++ if (data == 0) {
++ gpiommc_do_unregister(dev);
++ err = 0;
++ }
++ goto out;
++ }
++
++ if (gpiommc_is_registered(dev)) {
++ /* The rest of the config parameters can only be set
++ * as long as the device is not registered, yet. */
++ err = -EBUSY;
++ goto out;
++ }
++
++ if (attr == &gpiommc_attr_DI) {
++ err = strict_strtoul(page, 10, &data);
++ if (err)
++ goto out;
++ err = -EINVAL;
++ if (!gpio_is_valid(data))
++ goto out;
++ dev->pdata.pins.gpio_di = data;
++ err = 0;
++ goto out;
++ }
++ if (attr == &gpiommc_attr_DO) {
++ err = strict_strtoul(page, 10, &data);
++ if (err)
++ goto out;
++ err = -EINVAL;
++ if (!gpio_is_valid(data))
++ goto out;
++ dev->pdata.pins.gpio_do = data;
++ err = 0;
++ goto out;
++ }
++ if (attr == &gpiommc_attr_CLK) {
++ err = strict_strtoul(page, 10, &data);
++ if (err)
++ goto out;
++ err = -EINVAL;
++ if (!gpio_is_valid(data))
++ goto out;
++ dev->pdata.pins.gpio_clk = data;
++ err = 0;
++ goto out;
++ }
++ if (attr == &gpiommc_attr_CS) {
++ err = strict_strtoul(page, 10, &data);
++ if (err)
++ goto out;
++ err = -EINVAL;
++ if (!gpio_is_valid(data))
++ goto out;
++ dev->pdata.pins.gpio_cs = data;
++ err = 0;
++ goto out;
++ }
++ if (attr == &gpiommc_attr_CS_activelow) {
++ err = strict_strtoul(page, 10, &data);
++ if (err)
++ goto out;
++ err = -EINVAL;
++ if (data != 0 && data != 1)
++ goto out;
++ dev->pdata.pins.cs_activelow = data;
++ err = 0;
++ goto out;
++ }
++ if (attr == &gpiommc_attr_spimode) {
++ err = strict_strtoul(page, 10, &data);
++ if (err)
++ goto out;
++ err = -EINVAL;
++ switch (data) {
++ case 0:
++ dev->pdata.mode = SPI_MODE_0;
++ break;
++ case 1:
++ dev->pdata.mode = SPI_MODE_1;
++ break;
++ case 2:
++ dev->pdata.mode = SPI_MODE_2;
++ break;
++ case 3:
++ dev->pdata.mode = SPI_MODE_3;
++ break;
++ default:
++ goto out;
++ }
++ err = 0;
++ goto out;
++ }
++ if (attr == &gpiommc_attr_spidelay) {
++ err = strict_strtoul(page, 10, &data);
++ if (err)
++ goto out;
++ err = -EINVAL;
++ if (data != 0 && data != 1)
++ goto out;
++ dev->pdata.no_spi_delay = !data;
++ err = 0;
++ goto out;
++ }
++ if (attr == &gpiommc_attr_max_bus_speed) {
++ err = strict_strtoul(page, 10, &data);
++ if (err)
++ goto out;
++ err = -EINVAL;
++ if (data > UINT_MAX)
++ goto out;
++ dev->pdata.max_bus_speed = data;
++ err = 0;
++ goto out;
++ }
++ WARN_ON(1);
++ err = -ENOSYS;
++out:
++ return err ? err : count;
++}
++
++static void gpiommc_config_item_release(struct config_item *item)
++{
++ struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++
++ kfree(dev);
++}
++
++static struct configfs_item_operations gpiommc_config_item_ops = {
++ .release = gpiommc_config_item_release,
++ .show_attribute = gpiommc_config_attr_show,
++ .store_attribute = gpiommc_config_attr_store,
++};
++
++static struct config_item_type gpiommc_dev_ci_type = {
++ .ct_item_ops = &gpiommc_config_item_ops,
++ .ct_attrs = gpiommc_config_attrs,
++ .ct_owner = THIS_MODULE,
++};
++
++static struct config_item *gpiommc_make_item(struct config_group *group,
++ const char *name)
++{
++ struct gpiommc_configfs_device *dev;
++
++ if (strlen(name) > GPIOMMC_MAX_NAMELEN) {
++ printk(KERN_ERR PFX "configfs: device name too long\n");
++ return NULL;
++ }
++
++ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
++ if (!dev)
++ return NULL;
++
++ config_item_init_type_name(&dev->item, name,
++ &gpiommc_dev_ci_type);
++
++ /* Assign default configuration */
++ dev->pdata.pins.gpio_di = GPIO_INVALID;
++ dev->pdata.pins.gpio_do = GPIO_INVALID;
++ dev->pdata.pins.gpio_clk = GPIO_INVALID;
++ dev->pdata.pins.gpio_cs = GPIO_INVALID;
++ dev->pdata.pins.cs_activelow = 1;
++ dev->pdata.mode = SPI_MODE_0;
++ dev->pdata.no_spi_delay = 0;
++ dev->pdata.max_bus_speed = 5000000; /* 5 MHz */
++
++ return &(dev->item);
++}
++
++static void gpiommc_drop_item(struct config_group *group,
++ struct config_item *item)
++{
++ struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++
++ gpiommc_do_unregister(dev);
++ kfree(dev);
++}
++
++static struct configfs_group_operations gpiommc_ct_group_ops = {
++ .make_item = gpiommc_make_item,
++ .drop_item = gpiommc_drop_item,
++};
++
++static struct config_item_type gpiommc_ci_type = {
++ .ct_group_ops = &gpiommc_ct_group_ops,
++ .ct_owner = THIS_MODULE,
++};
++
++static struct configfs_subsystem gpiommc_subsys = {
++ .su_group = {
++ .cg_item = {
++ .ci_namebuf = GPIOMMC_PLATDEV_NAME,
++ .ci_type = &gpiommc_ci_type,
++ },
++ },
++ .su_mutex = __MUTEX_INITIALIZER(gpiommc_subsys.su_mutex),
++};
++
++#endif /* CONFIG_GPIOMMC_CONFIGFS */
++
++static struct platform_driver gpiommc_plat_driver = {
++ .probe = gpiommc_probe,
++ .remove = gpiommc_remove,
++ .driver = {
++ .name = GPIOMMC_PLATDEV_NAME,
++ .owner = THIS_MODULE,
++ },
++};
++
++int gpiommc_next_id(void)
++{
++ static atomic_t counter = ATOMIC_INIT(-1);
++
++ return atomic_inc_return(&counter);
++}
++EXPORT_SYMBOL(gpiommc_next_id);
++
++static int __init gpiommc_modinit(void)
++{
++ int err;
++
++ err = platform_driver_register(&gpiommc_plat_driver);
++ if (err)
++ return err;
++
++#ifdef CONFIG_GPIOMMC_CONFIGFS
++ config_group_init(&gpiommc_subsys.su_group);
++ err = configfs_register_subsystem(&gpiommc_subsys);
++ if (err) {
++ platform_driver_unregister(&gpiommc_plat_driver);
++ return err;
++ }
++#endif /* CONFIG_GPIOMMC_CONFIGFS */
++
++ return 0;
++}
++module_init(gpiommc_modinit);
++
++static void __exit gpiommc_modexit(void)
++{
++#ifdef CONFIG_GPIOMMC_CONFIGFS
++ configfs_unregister_subsystem(&gpiommc_subsys);
++#endif
++ platform_driver_unregister(&gpiommc_plat_driver);
++}
++module_exit(gpiommc_modexit);
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -467,6 +467,31 @@ config MMC_SDHI
+ This provides support for the SDHI SD/SDIO controller found in
+ SuperH and ARM SH-Mobile SoCs
+
++config GPIOMMC
++ tristate "MMC/SD over GPIO-based SPI"
++ depends on MMC && MMC_SPI && SPI_GPIO_OLD
++ help
++ This driver hooks up the mmc_spi and spi_gpio modules so that
++ MMC/SD cards can be used on a GPIO based bus by bitbanging
++ the SPI protocol in software.
++
++ This driver provides a configfs interface to dynamically create
++ and destroy GPIO-based MMC/SD card devices. It also provides
++ a platform device interface API.
++ See Documentation/gpiommc.txt for details.
++
++ The module will be called gpiommc.
++
++ If unsure, say N.
++
++config GPIOMMC_CONFIGFS
++ bool
++ depends on GPIOMMC && CONFIGFS_FS
++ default y
++ help
++ This option automatically enables configfs support for gpiommc
++ if configfs is available.
++
+ config MMC_CB710
+ tristate "ENE CB710 MMC/SD Interface support"
+ depends on PCI
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -36,6 +36,7 @@ tmio_mmc_core-$(subst m,y,$(CONFIG_MMC_S
+ obj-$(CONFIG_MMC_SDHI) += sh_mobile_sdhi.o
+ obj-$(CONFIG_MMC_CB710) += cb710-mmc.o
+ obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o
++obj-$(CONFIG_GPIOMMC) += gpiommc.o
+ obj-$(CONFIG_SDH_BFIN) += bfin_sdh.o
+ obj-$(CONFIG_MMC_DW) += dw_mmc.o
+ obj-$(CONFIG_MMC_DW_PLTFM) += dw_mmc-pltfm.o
+--- /dev/null
++++ b/include/linux/mmc/gpiommc.h
+@@ -0,0 +1,71 @@
++/*
++ * Device driver for MMC/SD cards driven over a GPIO bus.
++ *
++ * Copyright (c) 2008 Michael Buesch
++ *
++ * Licensed under the GNU/GPL version 2.
++ */
++#ifndef LINUX_GPIOMMC_H_
++#define LINUX_GPIOMMC_H_
++
++#include <linux/types.h>
++
++
++#define GPIOMMC_MAX_NAMELEN 15
++#define GPIOMMC_MAX_NAMELEN_STR __stringify(GPIOMMC_MAX_NAMELEN)
++
++/**
++ * struct gpiommc_pins - Hardware pin assignments
++ *
++ * @gpio_di: The GPIO number of the DATA IN pin
++ * @gpio_do: The GPIO number of the DATA OUT pin
++ * @gpio_clk: The GPIO number of the CLOCK pin
++ * @gpio_cs: The GPIO number of the CHIPSELECT pin
++ * @cs_activelow: If true, the chip is considered selected if @gpio_cs is low.
++ */
++struct gpiommc_pins {
++ unsigned int gpio_di;
++ unsigned int gpio_do;
++ unsigned int gpio_clk;
++ unsigned int gpio_cs;
++ bool cs_activelow;
++};
++
++/**
++ * struct gpiommc_platform_data - Platform data for a MMC-over-SPI-GPIO device.
++ *
++ * @name: The unique name string of the device.
++ * @pins: The hardware pin assignments.
++ * @mode: The hardware mode. This is either SPI_MODE_0,
++ * SPI_MODE_1, SPI_MODE_2 or SPI_MODE_3. See the SPI documentation.
++ * @no_spi_delay: Do not use delays in the lowlevel SPI bitbanging code.
++ * This is not standards compliant, but may be required for some
++ * embedded machines to gain reasonable speed.
++ * @max_bus_speed: The maximum speed of the SPI bus, in Hertz.
++ */
++struct gpiommc_platform_data {
++ char name[GPIOMMC_MAX_NAMELEN + 1];
++ struct gpiommc_pins pins;
++ u8 mode;
++ bool no_spi_delay;
++ unsigned int max_bus_speed;
++};
++
++/**
++ * GPIOMMC_PLATDEV_NAME - The platform device name string.
++ *
++ * The name string that has to be used for platform_device_alloc
++ * when allocating a gpiommc device.
++ */
++#define GPIOMMC_PLATDEV_NAME "gpiommc"
++
++/**
++ * gpiommc_next_id - Get another platform device ID number.
++ *
++ * This returns the next platform device ID number that has to be used
++ * for platform_device_alloc. The ID is opaque and should not be used for
++ * anything else.
++ */
++int gpiommc_next_id(void);
++
++#endif /* LINUX_GPIOMMC_H_ */
+--- /dev/null
++++ b/Documentation/gpiommc.txt
+@@ -0,0 +1,97 @@
++GPIOMMC - Driver for an MMC/SD card on a bitbanging GPIO SPI bus
++================================================================
++
++The gpiommc module hooks up the mmc_spi and spi_gpio modules for running an
++MMC or SD card on GPIO pins.
++
++Two interfaces for registering a new MMC/SD card device are provided:
++A static platform-device based mechanism and a dynamic configfs based interface.
++
++
++Registering devices via platform-device
++=======================================
++
++The platform-device interface is used for registering MMC/SD devices that are
++part of the hardware platform. This is most useful only for embedded machines
++with MMC/SD devices statically connected to the platform GPIO bus.
++
++The data structures are declared in <linux/mmc/gpiommc.h>.
++
++To register a new device, define an instance of struct gpiommc_platform_data.
++This structure holds any information about how the device is hooked up to the
++GPIO pins and what hardware modes the device supports. See the docbook-style
++documentation in the header file for more information on the struct fields.
++
++Then allocate a new instance of a platform device by doing:
++
++ pdev = platform_device_alloc(GPIOMMC_PLATDEV_NAME, gpiommc_next_id());
++
++This will allocate the platform device data structures and hook it up to the
++gpiommc driver.
++Then add the gpiommc_platform_data to the platform device.
++
++ err = platform_device_add_data(pdev, pdata, sizeof(struct gpiommc_platform_data));
++
++You may free the local instance of struct gpiommc_platform_data now. (So the
++struct may be allocated on the stack, too).
++Now simply register the platform device.
++
++ err = platform_device_add(pdev);
++
++Done. The gpiommc probe routine will be invoked now and you should see a kernel
++log message for the added device.
++
++
++Registering devices via configfs
++================================
++
++MMC/SD cards connected via GPIO often are a pretty dynamic thing, as for example
++selfmade hacks for soldering an MMC/SD card to standard GPIO pins on embedded
++hardware are a common situation.
++So we provide a dynamic interface to conveniently handle adding and removing
++devices from userspace, without the need to recompile the kernel.
++
++The "gpiommc" subdirectory at the configfs mountpoint is used for handling
++the dynamic configuration.
++
++To create a new device, it must first be allocated with mkdir.
++The following command will allocate a device named "my_mmc":
++ mkdir /config/gpiommc/my_mmc
++
++There are several configuration files available in the new
++/config/gpiommc/my_mmc/ directory:
++
++gpio_data_in = The SPI data-IN GPIO pin number.
++gpio_data_out = The SPI data-OUT GPIO pin number.
++gpio_clock = The SPI Clock GPIO pin number.
++gpio_chipselect = The SPI Chipselect GPIO pin number.
++gpio_chipselect_activelow = Boolean. If 0, Chipselect is active-HIGH.
++ If 1, Chipselect is active-LOW.
++spi_mode = The SPI data mode. Can be 0-3.
++spi_delay = Enable all delays in the lowlevel bitbanging.
++max_bus_speed = The maximum SPI bus speed. In Hertz.
++
++register = Not a configuration parameter.
++ Used to register the configured card
++ with the kernel.
++
++The device must first get configured and then registered by writing "1" to
++the "register" file.
++The configuration parameters "gpio_data_in", "gpio_data_out", "gpio_clock"
++and "gpio_chipselect" are essential and _must_ be configured before writing
++"1" to the "register" file. The registration will fail, otherwise.
++
++The default values for the other parameters are:
++gpio_chipselect_activelow = 1 (CS active-LOW)
++spi_mode = 0 (SPI_MODE_0)
++spi_delay = 1 (enabled)
++max_bus_speed = 5000000 (5 Mhz)
++
++Configuration values can not be changed after registration. To unregister
++the device, write a "0" to the "register" file. The configuration can be
++changed again after unregistering.
++
++To completely remove the device, simply rmdir the directory
++(/config/gpiommc/my_mmc in this example).
++There's no need to first unregister the device before removing it. That will
++be done automatically.
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -3401,6 +3401,11 @@ L: linuxppc-dev@lists.ozlabs.org
+ S: Odd Fixes
+ F: drivers/tty/hvc/
+
++GPIOMMC DRIVER
++P: Michael Buesch
++M: mb@bu3sch.de
++S: Maintained
++
+ HARDWARE MONITORING
+ M: Jean Delvare <khali@linux-fr.org>
+ M: Guenter Roeck <linux@roeck-us.net>
--- /dev/null
+The gpiommc configfs context structure needs locking, as configfs
+does not lock access between files.
+
+--- a/drivers/mmc/host/gpiommc.c
++++ b/drivers/mmc/host/gpiommc.c
+@@ -144,6 +144,8 @@ struct gpiommc_configfs_device {
+ struct platform_device *pdev;
+ /* The configuration */
+ struct gpiommc_platform_data pdata;
++ /* Mutex to protect this structure */
++ struct mutex mutex;
+ };
+
+ #define GPIO_INVALID -1
+@@ -234,6 +236,8 @@ static ssize_t gpiommc_config_attr_show(
+ unsigned int gpio;
+ int err = 0;
+
++ mutex_lock(&dev->mutex);
++
+ if (attr == &gpiommc_attr_DI) {
+ gpio = dev->pdata.pins.gpio_di;
+ if (gpio == GPIO_INVALID)
+@@ -294,6 +298,8 @@ static ssize_t gpiommc_config_attr_show(
+ WARN_ON(1);
+ err = -ENOSYS;
+ out:
++ mutex_unlock(&dev->mutex);
++
+ return err ? err : count;
+ }
+
+@@ -353,6 +359,8 @@ static ssize_t gpiommc_config_attr_store
+ int err = -EINVAL;
+ unsigned long data;
+
++ mutex_lock(&dev->mutex);
++
+ if (attr == &gpiommc_attr_register) {
+ err = strict_strtoul(page, 10, &data);
+ if (err)
+@@ -478,6 +486,8 @@ static ssize_t gpiommc_config_attr_store
+ WARN_ON(1);
+ err = -ENOSYS;
+ out:
++ mutex_unlock(&dev->mutex);
++
+ return err ? err : count;
+ }
+
+@@ -514,6 +524,7 @@ static struct config_item *gpiommc_make_
+ if (!dev)
+ return NULL;
+
++ mutex_init(&dev->mutex);
+ config_item_init_type_name(&dev->item, name,
+ &gpiommc_dev_ci_type);
+
--- /dev/null
+--- a/drivers/Kconfig
++++ b/drivers/Kconfig
+@@ -62,6 +62,8 @@ source "drivers/pinctrl/Kconfig"
+
+ source "drivers/gpio/Kconfig"
+
++source "drivers/pwm/Kconfig"
++
+ source "drivers/w1/Kconfig"
+
+ source "drivers/power/Kconfig"
+--- a/drivers/Makefile
++++ b/drivers/Makefile
+@@ -13,6 +13,7 @@ obj-y += pinctrl/
+ obj-y += gpio/
+ obj-y += pwm/
+ obj-$(CONFIG_PCI) += pci/
++obj-$(CONFIG_GENERIC_PWM) += pwm/
+ obj-$(CONFIG_PARISC) += parisc/
+ obj-$(CONFIG_RAPIDIO) += rapidio/
+ obj-y += video/
--- /dev/null
+--- a/drivers/crypto/hifn_795x.c
++++ b/drivers/crypto/hifn_795x.c
+@@ -682,12 +682,12 @@ static inline u32 hifn_read_1(struct hif
+
+ static inline void hifn_write_0(struct hifn_device *dev, u32 reg, u32 val)
+ {
+- writel((__force u32)cpu_to_le32(val), dev->bar[0] + reg);
++ writel(val, dev->bar[0] + reg);
+ }
+
+ static inline void hifn_write_1(struct hifn_device *dev, u32 reg, u32 val)
+ {
+- writel((__force u32)cpu_to_le32(val), dev->bar[1] + reg);
++ writel(val, dev->bar[1] + reg);
+ }
+
+ static void hifn_wait_puc(struct hifn_device *dev)
--- /dev/null
+--- a/drivers/hwmon/Kconfig
++++ b/drivers/hwmon/Kconfig
+@@ -434,6 +434,15 @@ config SENSORS_GL520SM
+ This driver can also be built as a module. If so, the module
+ will be called gl520sm.
+
++config SENSORS_GSC
++ tristate "Gateworks System Controller"
++ depends on I2C && (ARCH_DAVINCI || ARCH_CNS3XXX || ARCH_IXP4XX)
++ help
++ If you say yes here you get support for the Gateworks System Controller.
++
++ This driver can also be built as a module. If so, the module
++ will be called gsc.
++
+ config SENSORS_GPIO_FAN
+ tristate "GPIO fan"
+ depends on GPIOLIB
+--- a/drivers/hwmon/Makefile
++++ b/drivers/hwmon/Makefile
+@@ -130,6 +130,7 @@ obj-$(CONFIG_SENSORS_W83L785TS) += w83l7
+ obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o
+ obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o
+ obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o
++obj-$(CONFIG_SENSORS_GSC) += gsc.o
+
+ obj-$(CONFIG_PMBUS) += pmbus/
+
+--- /dev/null
++++ b/drivers/hwmon/gsc.c
+@@ -0,0 +1,308 @@
++/*
++ * A hwmon driver for the Gateworks System Controller
++ * Copyright (C) 2009 Gateworks Corporation
++ *
++ * Author: Chris Lang <clang@gateworks.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License,
++ * as published by the Free Software Foundation - version 2.
++ */
++
++#include <linux/module.h>
++#include <linux/i2c.h>
++#include <linux/hwmon.h>
++#include <linux/hwmon-sysfs.h>
++#include <linux/err.h>
++#include <linux/slab.h>
++
++#define DRV_VERSION "0.2"
++
++enum chips { gsp };
++
++/* AD7418 registers */
++#define GSP_REG_TEMP_IN 0x00
++#define GSP_REG_VIN 0x02
++#define GSP_REG_3P3 0x05
++#define GSP_REG_BAT 0x08
++#define GSP_REG_5P0 0x0b
++#define GSP_REG_CORE 0x0e
++#define GSP_REG_CPU1 0x11
++#define GSP_REG_CPU2 0x14
++#define GSP_REG_DRAM 0x17
++#define GSP_REG_EXT_BAT 0x1a
++#define GSP_REG_IO1 0x1d
++#define GSP_REG_IO2 0x20
++#define GSP_REG_PCIE 0x23
++#define GSP_REG_CURRENT 0x26
++#define GSP_FAN_0 0x2C
++#define GSP_FAN_1 0x2E
++#define GSP_FAN_2 0x30
++#define GSP_FAN_3 0x32
++#define GSP_FAN_4 0x34
++#define GSP_FAN_5 0x36
++
++struct gsp_sensor_info {
++ const char* name;
++ int reg;
++};
++
++static const struct gsp_sensor_info gsp_sensors[] = {
++ {"temp", GSP_REG_TEMP_IN},
++ {"vin", GSP_REG_VIN},
++ {"3p3", GSP_REG_3P3},
++ {"bat", GSP_REG_BAT},
++ {"5p0", GSP_REG_5P0},
++ {"core", GSP_REG_CORE},
++ {"cpu1", GSP_REG_CPU1},
++ {"cpu2", GSP_REG_CPU2},
++ {"dram", GSP_REG_DRAM},
++ {"ext_bat", GSP_REG_EXT_BAT},
++ {"io1", GSP_REG_IO1},
++ {"io2", GSP_REG_IO2},
++ {"pci2", GSP_REG_PCIE},
++ {"current", GSP_REG_CURRENT},
++ {"fan_point0", GSP_FAN_0},
++ {"fan_point1", GSP_FAN_1},
++ {"fan_point2", GSP_FAN_2},
++ {"fan_point3", GSP_FAN_3},
++ {"fan_point4", GSP_FAN_4},
++ {"fan_point5", GSP_FAN_5},
++};
++
++struct gsp_data {
++ struct device *hwmon_dev;
++ struct attribute_group attrs;
++ enum chips type;
++};
++
++static int gsp_probe(struct i2c_client *client,
++ const struct i2c_device_id *id);
++static int gsp_remove(struct i2c_client *client);
++
++static const struct i2c_device_id gsp_id[] = {
++ { "gsp", 0 },
++ { }
++};
++MODULE_DEVICE_TABLE(i2c, gsp_id);
++
++static struct i2c_driver gsp_driver = {
++ .driver = {
++ .name = "gsp",
++ },
++ .probe = gsp_probe,
++ .remove = gsp_remove,
++ .id_table = gsp_id,
++};
++
++/* All registers are word-sized, except for the configuration registers.
++ * AD7418 uses a high-byte first convention. Do NOT use those functions to
++ * access the configuration registers CONF and CONF2, as they are byte-sized.
++ */
++static inline int gsp_read(struct i2c_client *client, u8 reg)
++{
++ unsigned int adc = 0;
++ if (reg == GSP_REG_TEMP_IN || reg > GSP_REG_CURRENT)
++ {
++ adc |= i2c_smbus_read_byte_data(client, reg);
++ adc |= i2c_smbus_read_byte_data(client, reg + 1) << 8;
++ return adc;
++ }
++ else
++ {
++ adc |= i2c_smbus_read_byte_data(client, reg);
++ adc |= i2c_smbus_read_byte_data(client, reg + 1) << 8;
++ adc |= i2c_smbus_read_byte_data(client, reg + 2) << 16;
++ return adc;
++ }
++}
++
++static inline int gsp_write(struct i2c_client *client, u8 reg, u16 value)
++{
++ i2c_smbus_write_byte_data(client, reg, value & 0xff);
++ i2c_smbus_write_byte_data(client, reg + 1, ((value >> 8) & 0xff));
++ return 1;
++}
++
++static ssize_t show_adc(struct device *dev, struct device_attribute *devattr,
++ char *buf)
++{
++ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
++ struct i2c_client *client = to_i2c_client(dev);
++ return sprintf(buf, "%d\n", gsp_read(client, gsp_sensors[attr->index].reg));
++}
++
++static ssize_t show_label(struct device *dev,
++ struct device_attribute *devattr, char *buf)
++{
++ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
++
++ return sprintf(buf, "%s\n", gsp_sensors[attr->index].name);
++}
++
++static ssize_t store_fan(struct device *dev,
++ struct device_attribute *devattr, const char *buf, size_t count)
++{
++ u16 val;
++ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
++ struct i2c_client *client = to_i2c_client(dev);
++ val = simple_strtoul(buf, NULL, 10);
++ gsp_write(client, gsp_sensors[attr->index].reg, val);
++ return count;
++}
++
++static SENSOR_DEVICE_ATTR(temp0_input, S_IRUGO, show_adc, NULL, 0);
++static SENSOR_DEVICE_ATTR(temp0_label, S_IRUGO, show_label, NULL, 0);
++
++static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_adc, NULL, 1);
++static SENSOR_DEVICE_ATTR(in0_label, S_IRUGO, show_label, NULL, 1);
++static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_adc, NULL, 2);
++static SENSOR_DEVICE_ATTR(in1_label, S_IRUGO, show_label, NULL, 2);
++static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_adc, NULL, 3);
++static SENSOR_DEVICE_ATTR(in2_label, S_IRUGO, show_label, NULL, 3);
++static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_adc, NULL, 4);
++static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_label, NULL, 4);
++static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_adc, NULL, 5);
++static SENSOR_DEVICE_ATTR(in4_label, S_IRUGO, show_label, NULL, 5);
++static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_adc, NULL, 6);
++static SENSOR_DEVICE_ATTR(in5_label, S_IRUGO, show_label, NULL, 6);
++static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_adc, NULL, 7);
++static SENSOR_DEVICE_ATTR(in6_label, S_IRUGO, show_label, NULL, 7);
++static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_adc, NULL, 8);
++static SENSOR_DEVICE_ATTR(in7_label, S_IRUGO, show_label, NULL, 8);
++static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_adc, NULL, 9);
++static SENSOR_DEVICE_ATTR(in8_label, S_IRUGO, show_label, NULL, 9);
++static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, show_adc, NULL, 10);
++static SENSOR_DEVICE_ATTR(in9_label, S_IRUGO, show_label, NULL, 10);
++static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, show_adc, NULL, 11);
++static SENSOR_DEVICE_ATTR(in10_label, S_IRUGO, show_label, NULL, 11);
++static SENSOR_DEVICE_ATTR(in11_input, S_IRUGO, show_adc, NULL, 12);
++static SENSOR_DEVICE_ATTR(in11_label, S_IRUGO, show_label, NULL, 12);
++static SENSOR_DEVICE_ATTR(in12_input, S_IRUGO, show_adc, NULL, 13);
++static SENSOR_DEVICE_ATTR(in12_label, S_IRUGO, show_label, NULL, 13);
++
++static SENSOR_DEVICE_ATTR(fan0_point0, S_IRUGO | S_IWUSR, show_adc, store_fan, 14);
++static SENSOR_DEVICE_ATTR(fan0_point1, S_IRUGO | S_IWUSR, show_adc, store_fan, 15);
++static SENSOR_DEVICE_ATTR(fan0_point2, S_IRUGO | S_IWUSR, show_adc, store_fan, 16);
++static SENSOR_DEVICE_ATTR(fan0_point3, S_IRUGO | S_IWUSR, show_adc, store_fan, 17);
++static SENSOR_DEVICE_ATTR(fan0_point4, S_IRUGO | S_IWUSR, show_adc, store_fan, 18);
++static SENSOR_DEVICE_ATTR(fan0_point5, S_IRUGO | S_IWUSR, show_adc, store_fan, 19);
++
++static struct attribute *gsp_attributes[] = {
++ &sensor_dev_attr_temp0_input.dev_attr.attr,
++ &sensor_dev_attr_in0_input.dev_attr.attr,
++ &sensor_dev_attr_in1_input.dev_attr.attr,
++ &sensor_dev_attr_in2_input.dev_attr.attr,
++ &sensor_dev_attr_in3_input.dev_attr.attr,
++ &sensor_dev_attr_in4_input.dev_attr.attr,
++ &sensor_dev_attr_in5_input.dev_attr.attr,
++ &sensor_dev_attr_in6_input.dev_attr.attr,
++ &sensor_dev_attr_in7_input.dev_attr.attr,
++ &sensor_dev_attr_in8_input.dev_attr.attr,
++ &sensor_dev_attr_in9_input.dev_attr.attr,
++ &sensor_dev_attr_in10_input.dev_attr.attr,
++ &sensor_dev_attr_in11_input.dev_attr.attr,
++ &sensor_dev_attr_in12_input.dev_attr.attr,
++
++ &sensor_dev_attr_temp0_label.dev_attr.attr,
++ &sensor_dev_attr_in0_label.dev_attr.attr,
++ &sensor_dev_attr_in1_label.dev_attr.attr,
++ &sensor_dev_attr_in2_label.dev_attr.attr,
++ &sensor_dev_attr_in3_label.dev_attr.attr,
++ &sensor_dev_attr_in4_label.dev_attr.attr,
++ &sensor_dev_attr_in5_label.dev_attr.attr,
++ &sensor_dev_attr_in6_label.dev_attr.attr,
++ &sensor_dev_attr_in7_label.dev_attr.attr,
++ &sensor_dev_attr_in8_label.dev_attr.attr,
++ &sensor_dev_attr_in9_label.dev_attr.attr,
++ &sensor_dev_attr_in10_label.dev_attr.attr,
++ &sensor_dev_attr_in11_label.dev_attr.attr,
++ &sensor_dev_attr_in12_label.dev_attr.attr,
++
++ &sensor_dev_attr_fan0_point0.dev_attr.attr,
++ &sensor_dev_attr_fan0_point1.dev_attr.attr,
++ &sensor_dev_attr_fan0_point2.dev_attr.attr,
++ &sensor_dev_attr_fan0_point3.dev_attr.attr,
++ &sensor_dev_attr_fan0_point4.dev_attr.attr,
++ &sensor_dev_attr_fan0_point5.dev_attr.attr,
++ NULL
++};
++
++
++static int gsp_probe(struct i2c_client *client,
++ const struct i2c_device_id *id)
++{
++ struct i2c_adapter *adapter = client->adapter;
++ struct gsp_data *data;
++ int err;
++
++ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
++ I2C_FUNC_SMBUS_WORD_DATA)) {
++ err = -EOPNOTSUPP;
++ goto exit;
++ }
++
++ if (!(data = kzalloc(sizeof(struct gsp_data), GFP_KERNEL))) {
++ err = -ENOMEM;
++ goto exit;
++ }
++
++ i2c_set_clientdata(client, data);
++
++ data->type = id->driver_data;
++
++ switch (data->type) {
++ case 0:
++ data->attrs.attrs = gsp_attributes;
++ break;
++ }
++
++ dev_info(&client->dev, "%s chip found\n", client->name);
++
++ /* Register sysfs hooks */
++ if ((err = sysfs_create_group(&client->dev.kobj, &data->attrs)))
++ goto exit_free;
++
++ data->hwmon_dev = hwmon_device_register(&client->dev);
++ if (IS_ERR(data->hwmon_dev)) {
++ err = PTR_ERR(data->hwmon_dev);
++ goto exit_remove;
++ }
++
++ return 0;
++
++exit_remove:
++ sysfs_remove_group(&client->dev.kobj, &data->attrs);
++exit_free:
++ kfree(data);
++exit:
++ return err;
++}
++
++static int gsp_remove(struct i2c_client *client)
++{
++ struct gsp_data *data = i2c_get_clientdata(client);
++ hwmon_device_unregister(data->hwmon_dev);
++ sysfs_remove_group(&client->dev.kobj, &data->attrs);
++ kfree(data);
++ return 0;
++}
++
++static int __init gsp_init(void)
++{
++ return i2c_add_driver(&gsp_driver);
++}
++
++static void __exit gsp_exit(void)
++{
++ i2c_del_driver(&gsp_driver);
++}
++
++module_init(gsp_init);
++module_exit(gsp_exit);
++
++MODULE_AUTHOR("Chris Lang <clang@gateworks.com>");
++MODULE_DESCRIPTION("GSC HWMON driver");
++MODULE_LICENSE("GPL");
++MODULE_VERSION(DRV_VERSION);
++
--- /dev/null
+--- a/include/linux/slab.h
++++ b/include/linux/slab.h
+@@ -151,8 +151,8 @@ unsigned int kmem_cache_size(struct kmem
+ * to do various tricks to work around compiler limitations in order to
+ * ensure proper constant folding.
+ */
+-#define KMALLOC_SHIFT_HIGH ((MAX_ORDER + PAGE_SHIFT - 1) <= 25 ? \
+- (MAX_ORDER + PAGE_SHIFT - 1) : 25)
++#define KMALLOC_SHIFT_HIGH ((MAX_ORDER + PAGE_SHIFT - 1) <= 17 ? \
++ (MAX_ORDER + PAGE_SHIFT - 1) : 17)
+
+ #define KMALLOC_MAX_SIZE (1UL << KMALLOC_SHIFT_HIGH)
+ #define KMALLOC_MAX_ORDER (KMALLOC_SHIFT_HIGH - PAGE_SHIFT)
--- /dev/null
+--- a/lib/kobject_uevent.c
++++ b/lib/kobject_uevent.c
+@@ -51,6 +51,18 @@ static const char *kobject_actions[] = {
+ [KOBJ_OFFLINE] = "offline",
+ };
+
++u64 uevent_next_seqnum(void)
++{
++ u64 seq;
++
++ mutex_lock(&uevent_sock_mutex);
++ seq = ++uevent_seqnum;
++ mutex_unlock(&uevent_sock_mutex);
++
++ return seq;
++}
++EXPORT_SYMBOL_GPL(uevent_next_seqnum);
++
+ /**
+ * kobject_action_type - translate action string to numeric type
+ *
--- /dev/null
+--- a/include/linux/kobject.h
++++ b/include/linux/kobject.h
+@@ -31,6 +31,8 @@
+ #define UEVENT_NUM_ENVP 32 /* number of env pointers */
+ #define UEVENT_BUFFER_SIZE 2048 /* buffer for the variables */
+
++struct sk_buff;
++
+ /* path to the userspace helper executed on an event */
+ extern char uevent_helper[];
+
+@@ -213,6 +215,10 @@ int add_uevent_var(struct kobj_uevent_en
+
+ int kobject_action_type(const char *buf, size_t count,
+ enum kobject_action *type);
++
++int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group,
++ gfp_t allocation);
++
+ #else
+ static inline int kobject_uevent(struct kobject *kobj,
+ enum kobject_action action)
+@@ -229,6 +235,16 @@ int add_uevent_var(struct kobj_uevent_en
+ static inline int kobject_action_type(const char *buf, size_t count,
+ enum kobject_action *type)
+ { return -EINVAL; }
++
++void kfree_skb(struct sk_buff *);
++
++static inline int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group,
++ gfp_t allocation)
++{
++ kfree_skb(skb);
++ return 0;
++}
++
+ #endif
+
+ #endif /* _KOBJECT_H_ */
+--- a/lib/kobject_uevent.c
++++ b/lib/kobject_uevent.c
+@@ -382,6 +382,43 @@ int add_uevent_var(struct kobj_uevent_en
+ EXPORT_SYMBOL_GPL(add_uevent_var);
+
+ #if defined(CONFIG_NET)
++int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group,
++ gfp_t allocation)
++{
++ struct uevent_sock *ue_sk;
++ int err = 0;
++
++ /* send netlink message */
++ mutex_lock(&uevent_sock_mutex);
++ list_for_each_entry(ue_sk, &uevent_sock_list, list) {
++ struct sock *uevent_sock = ue_sk->sk;
++ struct sk_buff *skb2;
++
++ skb2 = skb_clone(skb, allocation);
++ if (!skb2)
++ break;
++
++ err = netlink_broadcast(uevent_sock, skb2, pid, group,
++ allocation);
++ if (err)
++ break;
++ }
++ mutex_unlock(&uevent_sock_mutex);
++
++ kfree_skb(skb);
++ return err;
++}
++#else
++int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group,
++ gfp_t allocation)
++{
++ kfree_skb(skb);
++ return 0;
++}
++#endif
++EXPORT_SYMBOL_GPL(broadcast_uevent);
++
++#if defined(CONFIG_NET)
+ static int uevent_net_init(struct net *net)
+ {
+ struct uevent_sock *ue_sk;
--- /dev/null
+--- a/init/main.c
++++ b/init/main.c
+@@ -877,7 +877,7 @@ static void __init kernel_init_freeable(
+
+ /* Open the /dev/console on the rootfs, this should never fail */
+ if (sys_open((const char __user *) "/dev/console", O_RDWR, 0) < 0)
+- printk(KERN_WARNING "Warning: unable to open an initial console.\n");
++ printk(KERN_WARNING "Please be patient, while OpenWrt loads ...\n");
+
+ (void) sys_dup(0);
+ (void) sys_dup(0);
--- /dev/null
+--- a/init/main.c
++++ b/init/main.c
+@@ -834,10 +834,7 @@ static int __ref kernel_init(void *unuse
+ printk(KERN_WARNING "Failed to execute %s. Attempting "
+ "defaults...\n", execute_command);
+ }
+- if (!run_init_process("/sbin/init") ||
+- !run_init_process("/etc/init") ||
+- !run_init_process("/bin/init") ||
+- !run_init_process("/bin/sh"))
++ if (!run_init_process("/etc/preinit"))
+ return 0;
+
+ panic("No init found. Try passing init= option to kernel. "
--- /dev/null
+--- /dev/null
++++ b/include/linux/crashlog.h
+@@ -0,0 +1,17 @@
++#ifndef __CRASHLOG_H
++#define __CRASHLOG_H
++
++#ifdef CONFIG_CRASHLOG
++void crashlog_init_bootmem(struct bootmem_data *bdata);
++void crashlog_init_memblock(phys_addr_t addr, phys_addr_t size);
++#else
++static inline void crashlog_init_bootmem(struct bootmem_data *bdata)
++{
++}
++
++static inline void crashlog_init_memblock(phys_addr_t addr, phys_addr_t size)
++{
++}
++#endif
++
++#endif
+--- a/init/Kconfig
++++ b/init/Kconfig
+@@ -1091,6 +1091,10 @@ config RELAY
+
+ If unsure, say N.
+
++config CRASHLOG
++ bool "Crash logging"
++ depends on (!NO_BOOTMEM || HAVE_MEMBLOCK) && !(ARM || SPARC)
++
+ config BLK_DEV_INITRD
+ bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
+ depends on BROKEN || !FRV
+--- a/kernel/Makefile
++++ b/kernel/Makefile
+@@ -110,6 +110,7 @@ obj-$(CONFIG_USER_RETURN_NOTIFIER) += us
+ obj-$(CONFIG_PADATA) += padata.o
+ obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
+ obj-$(CONFIG_JUMP_LABEL) += jump_label.o
++obj-$(CONFIG_CRASHLOG) += crashlog.o
+
+ $(obj)/configs.o: $(obj)/config_data.h
+
+--- /dev/null
++++ b/kernel/crashlog.c
+@@ -0,0 +1,181 @@
++/*
++ * Crash information logger
++ * Copyright (C) 2010 Felix Fietkau <nbd@openwrt.org>
++ *
++ * Based on ramoops.c
++ * Copyright (C) 2010 Marco Stornelli <marco.stornelli@gmail.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
++ * 02110-1301 USA
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/bootmem.h>
++#include <linux/memblock.h>
++#include <linux/debugfs.h>
++#include <linux/crashlog.h>
++#include <linux/kmsg_dump.h>
++#include <linux/module.h>
++#include <linux/pfn.h>
++#include <asm/io.h>
++
++#define CRASHLOG_PAGES 4
++#define CRASHLOG_SIZE (CRASHLOG_PAGES * PAGE_SIZE)
++#define CRASHLOG_MAGIC 0xa1eedead
++
++/*
++ * Start the log at 1M before the end of RAM, as some boot loaders like
++ * to use the end of the RAM for stack usage and other things
++ * If this fails, fall back to using the last part.
++ */
++#define CRASHLOG_OFFSET (1024 * 1024)
++
++struct crashlog_data {
++ u32 magic;
++ u32 len;
++ u8 data[];
++};
++
++static struct debugfs_blob_wrapper crashlog_blob;
++static unsigned long crashlog_addr = 0;
++static struct crashlog_data *crashlog_buf;
++static struct kmsg_dumper dump;
++static bool first = true;
++
++extern struct list_head *crashlog_modules;
++
++#ifndef CONFIG_NO_BOOTMEM
++void __init crashlog_init_bootmem(bootmem_data_t *bdata)
++{
++ unsigned long addr;
++
++ if (crashlog_addr)
++ return;
++
++ addr = PFN_PHYS(bdata->node_low_pfn) - CRASHLOG_OFFSET;
++ if (reserve_bootmem(addr, CRASHLOG_SIZE, BOOTMEM_EXCLUSIVE) < 0) {
++ printk("Crashlog failed to allocate RAM at address 0x%lx\n", addr);
++ bdata->node_low_pfn -= CRASHLOG_PAGES;
++ addr = PFN_PHYS(bdata->node_low_pfn);
++ }
++ crashlog_addr = addr;
++}
++#endif
++
++#ifdef CONFIG_HAVE_MEMBLOCK
++void __meminit crashlog_init_memblock(phys_addr_t addr, phys_addr_t size)
++{
++ if (crashlog_addr)
++ return;
++
++ addr += size - CRASHLOG_OFFSET;
++ if (memblock_reserve(addr, CRASHLOG_SIZE)) {
++ printk("Crashlog failed to allocate RAM at address 0x%lx\n", (unsigned long) addr);
++ return;
++ }
++
++ crashlog_addr = addr;
++}
++#endif
++
++static void __init crashlog_copy(void)
++{
++ if (crashlog_buf->magic != CRASHLOG_MAGIC)
++ return;
++
++ if (!crashlog_buf->len || crashlog_buf->len >
++ CRASHLOG_SIZE - sizeof(*crashlog_buf))
++ return;
++
++ crashlog_blob.size = crashlog_buf->len;
++ crashlog_blob.data = kmemdup(crashlog_buf->data,
++ crashlog_buf->len, GFP_KERNEL);
++
++ debugfs_create_blob("crashlog", 0700, NULL, &crashlog_blob);
++}
++
++static int get_maxlen(void)
++{
++ return CRASHLOG_SIZE - sizeof(*crashlog_buf) - crashlog_buf->len;
++}
++
++static void crashlog_printf(const char *fmt, ...)
++{
++ va_list args;
++ int len = get_maxlen();
++
++ if (!len)
++ return;
++
++ va_start(args, fmt);
++ crashlog_buf->len += vsnprintf(
++ &crashlog_buf->data[crashlog_buf->len],
++ len, fmt, args);
++ va_end(args);
++}
++
++static void crashlog_do_dump(struct kmsg_dumper *dumper,
++ enum kmsg_dump_reason reason)
++{
++ struct timeval tv;
++ struct module *m;
++ char *buf;
++ size_t len;
++
++ if (!first)
++ crashlog_printf("\n===================================\n");
++
++ do_gettimeofday(&tv);
++ crashlog_printf("Time: %lu.%lu\n",
++ (long)tv.tv_sec, (long)tv.tv_usec);
++
++ if (first) {
++ crashlog_printf("Modules:");
++ list_for_each_entry(m, crashlog_modules, list) {
++ crashlog_printf("\t%s@%p+%x", m->name,
++ m->module_core, m->core_size,
++ m->module_init, m->init_size);
++ }
++ crashlog_printf("\n");
++ first = false;
++ }
++
++ buf = (char *)&crashlog_buf->data[crashlog_buf->len];
++
++ kmsg_dump_get_buffer(dumper, true, buf, get_maxlen(), &len);
++
++ crashlog_buf->len += len;
++}
++
++
++int __init crashlog_init_fs(void)
++{
++ if (!crashlog_addr)
++ return -ENOMEM;
++
++ crashlog_buf = ioremap(crashlog_addr, CRASHLOG_SIZE);
++
++ crashlog_copy();
++
++ crashlog_buf->magic = CRASHLOG_MAGIC;
++ crashlog_buf->len = 0;
++
++ dump.max_reason = KMSG_DUMP_OOPS;
++ dump.dump = crashlog_do_dump;
++ kmsg_dump_register(&dump);
++
++ return 0;
++}
++module_init(crashlog_init_fs);
+--- a/mm/bootmem.c
++++ b/mm/bootmem.c
+@@ -15,6 +15,7 @@
+ #include <linux/export.h>
+ #include <linux/kmemleak.h>
+ #include <linux/range.h>
++#include <linux/crashlog.h>
+ #include <linux/memblock.h>
+
+ #include <asm/bug.h>
+@@ -177,6 +178,7 @@ static unsigned long __init free_all_boo
+ if (!bdata->node_bootmem_map)
+ return 0;
+
++ crashlog_init_bootmem(bdata);
+ start = bdata->node_min_pfn;
+ end = bdata->node_low_pfn;
+
+--- a/kernel/module.c
++++ b/kernel/module.c
+@@ -103,6 +103,9 @@ static LIST_HEAD(modules);
+ #ifdef CONFIG_KGDB_KDB
+ struct list_head *kdb_modules = &modules; /* kdb needs the list of modules */
+ #endif /* CONFIG_KGDB_KDB */
++#ifdef CONFIG_CRASHLOG
++struct list_head *crashlog_modules = &modules;
++#endif
+
+ #ifdef CONFIG_MODULE_SIG
+ #ifdef CONFIG_MODULE_SIG_FORCE
+--- a/mm/memblock.c
++++ b/mm/memblock.c
+@@ -19,6 +19,7 @@
+ #include <linux/debugfs.h>
+ #include <linux/seq_file.h>
+ #include <linux/memblock.h>
++#include <linux/crashlog.h>
+
+ static struct memblock_region memblock_memory_init_regions[INIT_MEMBLOCK_REGIONS] __initdata_memblock;
+ static struct memblock_region memblock_reserved_init_regions[INIT_MEMBLOCK_REGIONS] __initdata_memblock;
+@@ -342,6 +343,8 @@ static void __init_memblock memblock_ins
+ memblock_set_region_node(rgn, nid);
+ type->cnt++;
+ type->total_size += size;
++ if (type == &memblock.memory && idx == 0)
++ crashlog_init_memblock(base, size);
+ }
+
+ /**
--- /dev/null
+--- a/crypto/Kconfig
++++ b/crypto/Kconfig
+@@ -1226,3 +1226,6 @@ source "drivers/crypto/Kconfig"
+ source crypto/asymmetric_keys/Kconfig
+
+ endif # if CRYPTO
++
++source "crypto/ocf/Kconfig"
++
+--- a/crypto/Makefile
++++ b/crypto/Makefile
+@@ -93,6 +93,8 @@ obj-$(CONFIG_CRYPTO_USER_API) += af_alg.
+ obj-$(CONFIG_CRYPTO_USER_API_HASH) += algif_hash.o
+ obj-$(CONFIG_CRYPTO_USER_API_SKCIPHER) += algif_skcipher.o
+
++obj-$(CONFIG_OCF_OCF) += ocf/
++
+ #
+ # generic algorithms and the async_tx api
+ #
--- /dev/null
+--- a/drivers/char/random.c
++++ b/drivers/char/random.c
+@@ -139,6 +139,9 @@
+ * that might otherwise be identical and have very little entropy
+ * available to them (particularly common in the embedded world).
+ *
++ * void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
++ * int random_input_wait(void);
++ *
+ * add_input_randomness() uses the input layer interrupt timing, as well as
+ * the event type information from the hardware.
+ *
+@@ -152,6 +155,13 @@
+ * seek times do not make for good sources of entropy, as their seek
+ * times are usually fairly consistent.
+ *
++ * random_input_words() just provides a raw block of entropy to the input
++ * pool, such as from a hardware entropy generator.
++ *
++ * random_input_wait() suspends the caller until such time as the
++ * entropy pool falls below the write threshold, and returns a count of how
++ * much entropy (in bits) is needed to sustain the pool.
++ *
+ * All of these routines try to estimate how many bits of randomness a
+ * particular randomness source. They do this by keeping track of the
+ * first and second order deltas of the event timings.
+@@ -799,6 +809,63 @@ void add_disk_randomness(struct gendisk
+ }
+ #endif
+
++/*
++ * random_input_words - add bulk entropy to pool
++ *
++ * @buf: buffer to add
++ * @wordcount: number of __u32 words to add
++ * @ent_count: total amount of entropy (in bits) to credit
++ *
++ * this provides bulk input of entropy to the input pool
++ *
++ */
++void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
++{
++ mix_pool_bytes(&input_pool, buf, wordcount*4, NULL);
++
++ credit_entropy_bits(&input_pool, ent_count);
++
++ DEBUG_ENT("crediting %d bits => %d\n",
++ ent_count, input_pool.entropy_count);
++ /*
++ * Wake up waiting processes if we have enough
++ * entropy.
++ */
++ if (input_pool.entropy_count >= random_read_wakeup_thresh)
++ wake_up_interruptible(&random_read_wait);
++}
++EXPORT_SYMBOL(random_input_words);
++
++/*
++ * random_input_wait - wait until random needs entropy
++ *
++ * this function sleeps until the /dev/random subsystem actually
++ * needs more entropy, and then return the amount of entropy
++ * that it would be nice to have added to the system.
++ */
++int random_input_wait(void)
++{
++ int count;
++
++ wait_event_interruptible(random_write_wait,
++ input_pool.entropy_count < random_write_wakeup_thresh);
++
++ count = random_write_wakeup_thresh - input_pool.entropy_count;
++
++ /* likely we got woken up due to a signal */
++ if (count <= 0) count = random_read_wakeup_thresh;
++
++ DEBUG_ENT("requesting %d bits from input_wait()er %d<%d\n",
++ count,
++ input_pool.entropy_count, random_write_wakeup_thresh);
++
++ return count;
++}
++EXPORT_SYMBOL(random_input_wait);
++
++
++#define EXTRACT_SIZE 10
++
+ /*********************************************************************
+ *
+ * Entropy extraction routines
+--- a/fs/fcntl.c
++++ b/fs/fcntl.c
+@@ -146,6 +146,7 @@ pid_t f_getown(struct file *filp)
+ read_unlock(&filp->f_owner.lock);
+ return pid;
+ }
++EXPORT_SYMBOL(sys_dup);
+
+ static int f_setown_ex(struct file *filp, unsigned long arg)
+ {
+--- a/include/linux/miscdevice.h
++++ b/include/linux/miscdevice.h
+@@ -19,6 +19,7 @@
+ #define APOLLO_MOUSE_MINOR 7
+ #define PC110PAD_MINOR 9
+ /*#define ADB_MOUSE_MINOR 10 FIXME OBSOLETE */
++#define CRYPTODEV_MINOR 70 /* /dev/crypto */
+ #define WATCHDOG_MINOR 130 /* Watchdog timer */
+ #define TEMP_MINOR 131 /* Temperature Sensor */
+ #define RTC_MINOR 135
+--- a/include/uapi/linux/random.h
++++ b/include/uapi/linux/random.h
+@@ -34,6 +34,30 @@
+ /* Clear the entropy pool and associated counters. (Superuser only.) */
+ #define RNDCLEARPOOL _IO( 'R', 0x06 )
+
++#ifdef CONFIG_FIPS_RNG
++
++/* Size of seed value - equal to AES blocksize */
++#define AES_BLOCK_SIZE_BYTES 16
++#define SEED_SIZE_BYTES AES_BLOCK_SIZE_BYTES
++/* Size of AES key */
++#define KEY_SIZE_BYTES 16
++
++/* ioctl() structure used by FIPS 140-2 Tests */
++struct rand_fips_test {
++ unsigned char key[KEY_SIZE_BYTES]; /* Input */
++ unsigned char datetime[SEED_SIZE_BYTES]; /* Input */
++ unsigned char seed[SEED_SIZE_BYTES]; /* Input */
++ unsigned char result[SEED_SIZE_BYTES]; /* Output */
++};
++
++/* FIPS 140-2 RNG Variable Seed Test. (Superuser only.) */
++#define RNDFIPSVST _IOWR('R', 0x10, struct rand_fips_test)
++
++/* FIPS 140-2 RNG Monte Carlo Test. (Superuser only.) */
++#define RNDFIPSMCT _IOWR('R', 0x11, struct rand_fips_test)
++
++#endif /* #ifdef CONFIG_FIPS_RNG */
++
+ struct rand_pool_info {
+ int entropy_count;
+ int buf_size;
+--- a/include/linux/random.h
++++ b/include/linux/random.h
+@@ -14,6 +14,10 @@ extern void add_input_randomness(unsigne
+ unsigned int value);
+ extern void add_interrupt_randomness(int irq, int irq_flags);
+
++extern void random_input_words(__u32 *buf, size_t wordcount, int ent_count);
++extern int random_input_wait(void);
++#define HAS_RANDOM_INPUT_WAIT 1
++
+ extern void get_random_bytes(void *buf, int nbytes);
+ extern void get_random_bytes_arch(void *buf, int nbytes);
+ void generate_random_uuid(unsigned char uuid_out[16]);
+--- a/kernel/pid.c
++++ b/kernel/pid.c
+@@ -430,6 +430,7 @@ struct task_struct *find_task_by_vpid(pi
+ {
+ return find_task_by_pid_ns(vnr, current->nsproxy->pid_ns);
+ }
++EXPORT_SYMBOL(find_task_by_vpid);
+
+ struct pid *get_task_pid(struct task_struct *task, enum pid_type type)
+ {
--- /dev/null
+--- a/mm/shmem.c
++++ b/mm/shmem.c
+@@ -2769,6 +2769,15 @@ EXPORT_SYMBOL_GPL(shmem_truncate_range);
+
+ /* common code */
+
++void shmem_set_file(struct vm_area_struct *vma, struct file *file)
++{
++ if (vma->vm_file)
++ fput(vma->vm_file);
++ vma->vm_file = file;
++ vma->vm_ops = &shmem_vm_ops;
++}
++EXPORT_SYMBOL_GPL(shmem_set_file);
++
+ /**
+ * shmem_file_setup - get an unlinked file living in tmpfs
+ * @name: name for dentry (to be seen in /proc/<pid>/maps
+@@ -2845,11 +2854,8 @@ int shmem_zero_setup(struct vm_area_stru
+ file = shmem_file_setup("dev/zero", size, vma->vm_flags);
+ if (IS_ERR(file))
+ return PTR_ERR(file);
++ shmem_set_file(vma, file);
+
+- if (vma->vm_file)
+- fput(vma->vm_file);
+- vma->vm_file = file;
+- vma->vm_ops = &shmem_vm_ops;
+ return 0;
+ }
+
+--- a/fs/file.c
++++ b/fs/file.c
+@@ -270,6 +270,7 @@ static inline void __set_open_fd(int fd,
+ {
+ __set_bit(fd, fdt->open_fds);
+ }
++EXPORT_SYMBOL_GPL(expand_files);
+
+ static inline void __clear_open_fd(int fd, struct fdtable *fdt)
+ {
+--- a/kernel/exit.c
++++ b/kernel/exit.c
+@@ -461,6 +461,7 @@ void daemonize(const char *name, ...)
+
+ reparent_to_kthreadd();
+ }
++EXPORT_SYMBOL_GPL(get_files_struct);
+
+ EXPORT_SYMBOL(daemonize);
+
+@@ -603,6 +604,7 @@ static void exit_mm(struct task_struct *
+ mm_update_next_owner(mm);
+ mmput(mm);
+ }
++EXPORT_SYMBOL_GPL(put_files_struct);
+
+ /*
+ * When we die, we re-parent all our children, and try to:
+--- a/kernel/sched/core.c
++++ b/kernel/sched/core.c
+@@ -3565,6 +3565,7 @@ int can_nice(const struct task_struct *p
+ return (nice_rlim <= task_rlimit(p, RLIMIT_NICE) ||
+ capable(CAP_SYS_NICE));
+ }
++EXPORT_SYMBOL_GPL(can_nice);
+
+ #ifdef __ARCH_WANT_SYS_NICE
+
+--- a/mm/memory.c
++++ b/mm/memory.c
+@@ -1415,6 +1415,7 @@ void zap_page_range(struct vm_area_struc
+ mmu_notifier_invalidate_range_end(mm, start, end);
+ tlb_finish_mmu(&tlb, start, end);
+ }
++EXPORT_SYMBOL_GPL(zap_page_range);
+
+ /**
+ * zap_page_range_single - remove user pages in a given range
+--- a/mm/vmalloc.c
++++ b/mm/vmalloc.c
+@@ -1266,6 +1266,7 @@ void unmap_kernel_range(unsigned long ad
+ vunmap_page_range(addr, end);
+ flush_tlb_kernel_range(addr, end);
+ }
++EXPORT_SYMBOL_GPL(unmap_kernel_range);
+
+ int map_vm_area(struct vm_struct *area, pgprot_t prot, struct page ***pages)
+ {
+@@ -1403,6 +1404,7 @@ struct vm_struct *get_vm_area(unsigned l
+ return __get_vm_area_node(size, 1, flags, VMALLOC_START, VMALLOC_END,
+ -1, GFP_KERNEL, __builtin_return_address(0));
+ }
++EXPORT_SYMBOL_GPL(get_vm_area);
+
+ struct vm_struct *get_vm_area_caller(unsigned long size, unsigned long flags,
+ const void *caller)
+--- a/include/linux/shmem_fs.h
++++ b/include/linux/shmem_fs.h
+@@ -47,6 +47,8 @@ extern int shmem_init(void);
+ extern int shmem_fill_super(struct super_block *sb, void *data, int silent);
+ extern struct file *shmem_file_setup(const char *name,
+ loff_t size, unsigned long flags);
++
++extern void shmem_set_file(struct vm_area_struct *vma, struct file *file);
+ extern int shmem_zero_setup(struct vm_area_struct *);
+ extern int shmem_lock(struct file *file, int lock, struct user_struct *user);
+ extern void shmem_unlock_mapping(struct address_space *mapping);
--- /dev/null
+--- /dev/null
++++ b/include/linux/decompress/unlzo_mm.h
+@@ -0,0 +1,10 @@
++#ifndef UNLZO_MM_H
++#define UNLZO_MM_H
++
++#ifdef STATIC
++#define INIT
++#else
++#define INIT __init
++#endif
++
++#endif
+--- a/lib/decompress_unlzo.c
++++ b/lib/decompress_unlzo.c
+@@ -38,6 +38,7 @@
+
+ #include <linux/types.h>
+ #include <linux/lzo.h>
++#include <linux/decompress/unlzo_mm.h>
+ #include <linux/decompress/mm.h>
+
+ #include <linux/compiler.h>
--- /dev/null
+--- a/usr/Makefile
++++ b/usr/Makefile
+@@ -50,20 +50,22 @@ ifneq ($(wildcard $(obj)/.initramfs_data
+ include $(obj)/.initramfs_data.cpio.d
+ endif
+
++deps_initramfs_sane := $(foreach v,$(deps_initramfs),$(if $(findstring :,$(v)),,$(v)))
++
+ quiet_cmd_initfs = GEN $@
+ cmd_initfs = $(initramfs) -o $@ $(ramfs-args) $(ramfs-input)
+
+ targets := initramfs_data.cpio.gz initramfs_data.cpio.bz2 initramfs_data.cpio.lzma initramfs_data.cpio.xz initramfs_data.cpio.lzo initramfs_data.cpio
+ # do not try to update files included in initramfs
+-$(deps_initramfs): ;
++$(deps_initramfs_sane): ;
+
+-$(deps_initramfs): klibcdirs
++$(deps_initramfs_sane): klibcdirs
+ # We rebuild initramfs_data.cpio if:
+ # 1) Any included file is newer then initramfs_data.cpio
+ # 2) There are changes in which files are included (added or deleted)
+ # 3) If gen_init_cpio are newer than initramfs_data.cpio
+ # 4) arguments to gen_initramfs.sh changes
+-$(obj)/initramfs_data.cpio$(suffix_y): $(obj)/gen_init_cpio $(deps_initramfs) klibcdirs
++$(obj)/initramfs_data.cpio$(suffix_y): $(obj)/gen_init_cpio $(deps_initramfs_sane) klibcdirs
+ $(Q)$(initramfs) -l $(ramfs-input) > $(obj)/.initramfs_data.cpio.d
+ $(call if_changed,initfs)
+
--- /dev/null
+--- a/arch/arm/tools/mach-types
++++ b/arch/arm/tools/mach-types
+@@ -1204,3 +1204,31 @@ baileys MACH_BAILEYS BAILEYS 4169
+ familybox MACH_FAMILYBOX FAMILYBOX 4170
+ ensemble_mx35 MACH_ENSEMBLE_MX35 ENSEMBLE_MX35 4171
+ sc_sps_1 MACH_SC_SPS_1 SC_SPS_1 4172
++#
++# Additional mach-types supported by OpenWrt
++#
++wg302v1 MACH_WG302V1 WG302V1 889
++pronghorn MACH_PRONGHORN PRONGHORN 928
++pronghorn_metro MACH_PRONGHORNMETRO PRONGHORNMETRO 1040
++sidewinder MACH_SIDEWINDER SIDEWINDER 1041
++wrt300nv2 MACH_WRT300NV2 WRT300NV2 1077
++compex42x MACH_COMPEXWP18 COMPEXWP18 1273
++goldfish MACH_GOLDFISH GOLDFISH 1441
++cambria MACH_CAMBRIA CAMBRIA 1468
++dt2 MACH_DT2 DT2 1514
++ap1000 MACH_AP1000 AP1000 1543
++tw2662 MACH_TW2662 TW2662 1658
++tw5334 MACH_TW5334 TW5334 1664
++usr8200 MACH_USR8200 USR8200 1762
++mi424wr MACH_MI424WR MI424WR 1778
++gw2388 MACH_GW2388 GW2388 2635
++iconnect MACH_ICONNECT ICONNECT 2870
++nsb3ast MACH_NSB3AST NSB3AST 2917
++goflexnet MACH_GOFLEXNET GOFLEXNET 3089
++nas6210 MACH_NAS6210 NAS6210 3104
++ns_k330 MACH_NS_K330 NS_K330 3108
++bcm2708 MACH_BCM2708 BCM2708 3138
++wn802t MACH_WN802T WN802T 3306
++nsa310 MACH_NSA310 NSA310 4022
++wnr3500 MACH_WNR3500 WNR3500 4407
++ap42x MACH_AP42X AP42X 4418
--- /dev/null
+Although the commit "98af057092f8f0dabe63c5df08adc2bbfbddb1d2
+ ARM: 6126/1: ARM mpcore_wdt: fix build failure and other fixes"
+resolved long standing mpcore_wdt driver build problems, it
+introduced an error in the relationship between the MPcore watchdog
+timer clock rate and mpcore_margin, "MPcore timer margin in seconds",
+such that watchdog timeouts are now arbitrary rather than the number
+of seconds specified by mpcore_margin.
+
+This change restores mpcore_wdt_keepalive() to its equivalent
+implementation prior to commit 98af057 such that watchdog timeouts now
+occur as specified by mpcore_margin.
+
+The variable 'mpcore_timer_rate' which caused that build failure was
+replaced by 'twd_timer_rate'. Adding exported function to obtain
+'twd_timer_rate' value in mpcore_wdt driver.
+
+MPCORE_WATCHDOG needed to build 'mpcore_wdt' already depends on
+HAVE_ARM_TWD needed to build 'smp_twd', so from the point of view of
+'mpcore_wdt' driver the exported function will always exist.
+
+Signed-off-by: Valentine Barshak <vbarshak@mvista.com>
+Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
+---
+
+ arch/arm/include/asm/smp_twd.h | 1 +
+ arch/arm/kernel/smp_twd.c | 7 +++++++
+ drivers/watchdog/mpcore_wdt.c | 4 +---
+ 3 files changed, 9 insertions(+), 3 deletions(-)
+
+--- a/arch/arm/include/asm/smp_twd.h
++++ b/arch/arm/include/asm/smp_twd.h
+@@ -33,6 +33,7 @@ struct twd_local_timer name __initdata =
+ };
+
+ int twd_local_timer_register(struct twd_local_timer *);
++unsigned long twd_timer_get_rate(void);
+
+ #ifdef CONFIG_HAVE_ARM_TWD
+ void twd_local_timer_of_register(void);
+--- a/arch/arm/kernel/smp_twd.c
++++ b/arch/arm/kernel/smp_twd.c
+@@ -352,6 +352,13 @@ int __init twd_local_timer_register(stru
+ return twd_local_timer_common_register();
+ }
+
++/* Needed by mpcore_wdt */
++unsigned long twd_timer_get_rate(void)
++{
++ return twd_timer_rate;
++}
++EXPORT_SYMBOL_GPL(twd_timer_get_rate);
++
+ #ifdef CONFIG_OF
+ const static struct of_device_id twd_of_match[] __initconst = {
+ { .compatible = "arm,cortex-a9-twd-timer", },
+--- a/drivers/watchdog/mpcore_wdt.c
++++ b/drivers/watchdog/mpcore_wdt.c
+@@ -102,9 +102,7 @@ static void mpcore_wdt_keepalive(struct
+
+ spin_lock(&wdt_lock);
+ /* Assume prescale is set to 256 */
+- count = __raw_readl(wdt->base + TWD_WDOG_COUNTER);
+- count = (0xFFFFFFFFU - count) * (HZ / 5);
+- count = (count / 256) * mpcore_margin;
++ count = (twd_timer_get_rate() / 256) * mpcore_margin;
+
+ /* Reload the counter */
+ writel(count + wdt->perturb, wdt->base + TWD_WDOG_LOAD);
--- /dev/null
+According to the include/linux/watchdog.h WDIOC_SETOPTIONS is
+classified as 'read from device' ioctl call:
+ #define WDIOC_SETOPTIONS _IOR(WATCHDOG_IOCTL_BASE, 4, int)
+
+However, the driver 'mpcore_wdt' performs 'copy_from_user' only if
+_IOC_WRITE is set, thus the local variable 'uarg' which is used in
+WDIOC_SETOPTIONS handling remains uninitialized.
+
+The proper way to fix this is to bind WDIOC_SETOPTIONS to _IOW,
+but this will break compatibility.
+So adding additional condition for performing 'copy_from_user'.
+
+Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
+---
+ drivers/watchdog/mpcore_wdt.c | 3 ++-
+ 1 files changed, 2 insertions(+), 1 deletions(-)
+
+--- a/drivers/watchdog/mpcore_wdt.c
++++ b/drivers/watchdog/mpcore_wdt.c
+@@ -236,7 +236,8 @@ static long mpcore_wdt_ioctl(struct file
+ if (_IOC_DIR(cmd) && _IOC_SIZE(cmd) > sizeof(uarg))
+ return -ENOTTY;
+
+- if (_IOC_DIR(cmd) & _IOC_WRITE) {
++ if ((_IOC_DIR(cmd) & _IOC_WRITE)
++ || cmd == WDIOC_SETOPTIONS) {
+ ret = copy_from_user(&uarg, (void __user *)arg, _IOC_SIZE(cmd));
+ if (ret)
+ return -EFAULT;
--- /dev/null
+Allow watchdog to set its iterrupt as pending when it is configured
+for timer mode (in other words, allow emitting interrupt).
+Also add macros for all Watchdog Control Register flags.
+
+Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
+---
+ arch/arm/include/asm/smp_twd.h | 6 ++++++
+ drivers/watchdog/mpcore_wdt.c | 15 +++++++++++----
+ 2 files changed, 17 insertions(+), 4 deletions(-)
+
+--- a/arch/arm/include/asm/smp_twd.h
++++ b/arch/arm/include/asm/smp_twd.h
+@@ -18,6 +18,12 @@
+ #define TWD_TIMER_CONTROL_PERIODIC (1 << 1)
+ #define TWD_TIMER_CONTROL_IT_ENABLE (1 << 2)
+
++#define TWD_WDOG_CONTROL_ENABLE (1 << 0)
++#define TWD_WDOG_CONTROL_PERIODIC (1 << 1)
++#define TWD_WDOG_CONTROL_IT_ENABLE (1 << 2)
++#define TWD_WDOG_CONTROL_TIMER_MODE (0 << 3)
++#define TWD_WDOG_CONTROL_WATCHDOG_MODE (1 << 3)
++
+ #include <linux/ioport.h>
+
+ struct twd_local_timer {
+--- a/drivers/watchdog/mpcore_wdt.c
++++ b/drivers/watchdog/mpcore_wdt.c
+@@ -121,18 +121,25 @@ static void mpcore_wdt_stop(struct mpcor
+
+ static void mpcore_wdt_start(struct mpcore_wdt *wdt)
+ {
++ u32 mode;
++
+ dev_printk(KERN_INFO, wdt->dev, "enabling watchdog.\n");
+
+ /* This loads the count register but does NOT start the count yet */
+ mpcore_wdt_keepalive(wdt);
+
++ /* Setup watchdog - prescale=256, enable=1 */
++ mode = (255 << 8) | TWD_WDOG_CONTROL_ENABLE;
++
+ if (mpcore_noboot) {
+- /* Enable watchdog - prescale=256, watchdog mode=0, enable=1 */
+- writel(0x0000FF01, wdt->base + TWD_WDOG_CONTROL);
++ /* timer mode, send interrupt */
++ mode |= TWD_WDOG_CONTROL_TIMER_MODE |
++ TWD_WDOG_CONTROL_IT_ENABLE;
+ } else {
+- /* Enable watchdog - prescale=256, watchdog mode=1, enable=1 */
+- writel(0x0000FF09, wdt->base + TWD_WDOG_CONTROL);
++ /* watchdog mode */
++ mode |= TWD_WDOG_CONTROL_WATCHDOG_MODE;
+ }
++ writel(mode, wdt->base + TWD_WDOG_CONTROL);
+ }
+
+ static int mpcore_wdt_set_heartbeat(int t)
--- /dev/null
+From 6a76edddaa62ff06f178143b582167734cb55c18 Mon Sep 17 00:00:00 2001
+From: Chris Packham <chris.packham@alliedtelesis.co.nz>
+Date: Mon, 01 Oct 2012 05:12:54 +0000
+Subject: libc/sysdeps: add __kernel_long and __kernel_ulong
+
+Linux 3.4 added __kernel_long_t and __kernel_ulong_t and various
+exported header files were updated to use these new types. Add the
+definitions for __kernel_long_t and __kernel_ulong_t to the relevant
+kernel_types.h headers.
+
+This change was automated with the following scriptlet
+
+ git grep --name-only 'typedef.*__kernel_old_dev_t' \
+ | xargs sed -i '/typedef.*__kernel_old_dev_t/ a\
+ typedef long\t\t__kernel_long_t;\
+ typedef unsigned long\t__kernel_ulong_t;'
+
+Whitespace in arm, avr32, hppa, sparc was then manually fixed up.
+
+Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
+--
+Here's a cleaned up patch which should get the whitespace right. I'm a
+bit iffy about the sparc changes they make sense to me but it's not a
+platform I have access to.
+
+I can break this up per arch or per maintainer if requested.
+
+ libc/sysdeps/linux/alpha/bits/kernel_types.h | 2 ++
+ libc/sysdeps/linux/arm/bits/kernel_types.h | 2 ++
+ libc/sysdeps/linux/avr32/bits/kernel_types.h | 2 ++
+ libc/sysdeps/linux/bfin/bits/kernel_types.h | 2 ++
+ libc/sysdeps/linux/c6x/bits/kernel_types.h | 2 ++
+ libc/sysdeps/linux/cris/bits/kernel_types.h | 2 ++
+ libc/sysdeps/linux/e1/bits/kernel_types.h | 2 ++
+ libc/sysdeps/linux/h8300/bits/kernel_types.h | 2 ++
+ libc/sysdeps/linux/hppa/bits/kernel_types.h | 2 ++
+ libc/sysdeps/linux/i386/bits/kernel_types.h | 2 ++
+ libc/sysdeps/linux/ia64/bits/kernel_types.h | 2 ++
+ libc/sysdeps/linux/m68k/bits/kernel_types.h | 2 ++
+ libc/sysdeps/linux/microblaze/bits/kernel_types.h | 2 ++
+ libc/sysdeps/linux/mips/bits/kernel_types.h | 4 ++++
+ libc/sysdeps/linux/nios2/bits/kernel_types.h | 2 ++
+ libc/sysdeps/linux/powerpc/bits/kernel_types.h | 4 ++++
+ libc/sysdeps/linux/sh/bits/kernel_types.h | 2 ++
+ libc/sysdeps/linux/sh64/bits/kernel_types.h | 2 ++
+ libc/sysdeps/linux/sparc/bits/kernel_types.h | 4 ++++
+ libc/sysdeps/linux/v850/bits/kernel_types.h | 2 ++
+ libc/sysdeps/linux/x86_64/bits/kernel_types.h | 2 ++
+ libc/sysdeps/linux/xtensa/bits/kernel_types.h | 2 ++
+ 22 files changed, 50 insertions(+)
+Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
+---
+diff --git a/libc/sysdeps/linux/alpha/bits/kernel_types.h b/libc/sysdeps/linux/alpha/bits/kernel_types.h
+index d5574c9..cd59b9d 100644
+--- a/libc/sysdeps/linux/alpha/bits/kernel_types.h
++++ b/libc/sysdeps/linux/alpha/bits/kernel_types.h
+@@ -33,6 +33,8 @@ typedef __kernel_gid_t __kernel_old_gid_t;
+ typedef __kernel_uid_t __kernel_uid32_t;
+ typedef __kernel_gid_t __kernel_gid32_t;
+ typedef __kernel_dev_t __kernel_old_dev_t;
++typedef long __kernel_long_t;
++typedef unsigned long __kernel_ulong_t;
+
+ typedef struct {
+ int val[2];
+diff --git a/libc/sysdeps/linux/arm/bits/kernel_types.h b/libc/sysdeps/linux/arm/bits/kernel_types.h
+index 766a306..6b36f32 100644
+--- a/libc/sysdeps/linux/arm/bits/kernel_types.h
++++ b/libc/sysdeps/linux/arm/bits/kernel_types.h
+@@ -32,6 +32,8 @@ typedef unsigned short __kernel_old_uid_t;
+ typedef unsigned short __kernel_old_gid_t;
+ typedef long long __kernel_loff_t;
+ typedef __kernel_dev_t __kernel_old_dev_t;
++typedef long __kernel_long_t;
++typedef unsigned long __kernel_ulong_t;
+
+ typedef struct {
+ #ifdef __USE_ALL
+diff --git a/libc/sysdeps/linux/avr32/bits/kernel_types.h b/libc/sysdeps/linux/avr32/bits/kernel_types.h
+index f7d8b52..c551d57 100644
+--- a/libc/sysdeps/linux/avr32/bits/kernel_types.h
++++ b/libc/sysdeps/linux/avr32/bits/kernel_types.h
+@@ -39,6 +39,8 @@ typedef unsigned int __kernel_gid32_t;
+ typedef unsigned short __kernel_old_uid_t;
+ typedef unsigned short __kernel_old_gid_t;
+ typedef unsigned short __kernel_old_dev_t;
++typedef long __kernel_long_t;
++typedef unsigned long __kernel_ulong_t;
+
+ #ifdef __GNUC__
+ typedef long long __kernel_loff_t;
+diff --git a/libc/sysdeps/linux/bfin/bits/kernel_types.h b/libc/sysdeps/linux/bfin/bits/kernel_types.h
+index d69a875..9fec595 100644
+--- a/libc/sysdeps/linux/bfin/bits/kernel_types.h
++++ b/libc/sysdeps/linux/bfin/bits/kernel_types.h
+@@ -32,6 +32,8 @@ typedef unsigned short __kernel_old_uid_t;
+ typedef unsigned short __kernel_old_gid_t;
+ typedef long long __kernel_loff_t;
+ typedef __kernel_dev_t __kernel_old_dev_t;
++typedef long __kernel_long_t;
++typedef unsigned long __kernel_ulong_t;
+
+ typedef struct {
+ #ifdef __USE_ALL
+diff --git a/libc/sysdeps/linux/c6x/bits/kernel_types.h b/libc/sysdeps/linux/c6x/bits/kernel_types.h
+index 7557309..2c363a8 100644
+--- a/libc/sysdeps/linux/c6x/bits/kernel_types.h
++++ b/libc/sysdeps/linux/c6x/bits/kernel_types.h
+@@ -22,6 +22,8 @@ typedef unsigned int __kernel_gid32_t;
+ typedef unsigned int __kernel_old_uid_t;
+ typedef unsigned int __kernel_old_gid_t;
+ typedef unsigned int __kernel_old_dev_t;
++typedef long __kernel_long_t;
++typedef unsigned long __kernel_ulong_t;
+ typedef unsigned int __kernel_size_t;
+ typedef int __kernel_ssize_t;
+ typedef int __kernel_ptrdiff_t;
+diff --git a/libc/sysdeps/linux/cris/bits/kernel_types.h b/libc/sysdeps/linux/cris/bits/kernel_types.h
+index f122c7f..5d31f7b 100644
+--- a/libc/sysdeps/linux/cris/bits/kernel_types.h
++++ b/libc/sysdeps/linux/cris/bits/kernel_types.h
+@@ -28,6 +28,8 @@ typedef unsigned int __kernel_gid32_t;
+ typedef unsigned short __kernel_old_uid_t;
+ typedef unsigned short __kernel_old_gid_t;
+ typedef __kernel_dev_t __kernel_old_dev_t;
++typedef long __kernel_long_t;
++typedef unsigned long __kernel_ulong_t;
+
+ #ifdef __GNUC__
+ typedef long long __kernel_loff_t;
+diff --git a/libc/sysdeps/linux/e1/bits/kernel_types.h b/libc/sysdeps/linux/e1/bits/kernel_types.h
+index 8017d85..f55a129 100644
+--- a/libc/sysdeps/linux/e1/bits/kernel_types.h
++++ b/libc/sysdeps/linux/e1/bits/kernel_types.h
+@@ -31,6 +31,8 @@ typedef unsigned int __kernel_gid32_t;
+ typedef unsigned short __kernel_old_uid_t;
+ typedef unsigned short __kernel_old_gid_t;
+ typedef __kernel_dev_t __kernel_old_dev_t;
++typedef long __kernel_long_t;
++typedef unsigned long __kernel_ulong_t;
+ typedef long long __kernel_loff_t;
+
+ /*
+diff --git a/libc/sysdeps/linux/h8300/bits/kernel_types.h b/libc/sysdeps/linux/h8300/bits/kernel_types.h
+index 0570675..4cfd1bf 100644
+--- a/libc/sysdeps/linux/h8300/bits/kernel_types.h
++++ b/libc/sysdeps/linux/h8300/bits/kernel_types.h
+@@ -32,6 +32,8 @@ typedef unsigned short __kernel_old_uid_t;
+ typedef unsigned short __kernel_old_gid_t;
+ typedef long long __kernel_loff_t;
+ typedef __kernel_dev_t __kernel_old_dev_t;
++typedef long __kernel_long_t;
++typedef unsigned long __kernel_ulong_t;
+
+ typedef struct {
+ #ifdef __USE_ALL
+diff --git a/libc/sysdeps/linux/hppa/bits/kernel_types.h b/libc/sysdeps/linux/hppa/bits/kernel_types.h
+index 4441f9b..6b2e794 100644
+--- a/libc/sysdeps/linux/hppa/bits/kernel_types.h
++++ b/libc/sysdeps/linux/hppa/bits/kernel_types.h
+@@ -45,6 +45,8 @@ typedef long long __kernel_off64_t;
+ typedef unsigned long long __kernel_ino64_t;
+
+ typedef unsigned int __kernel_old_dev_t;
++typedef long __kernel_long_t;
++typedef unsigned long __kernel_ulong_t;
+
+ typedef struct {
+ #ifdef __USE_ALL
+diff --git a/libc/sysdeps/linux/i386/bits/kernel_types.h b/libc/sysdeps/linux/i386/bits/kernel_types.h
+index 9c07c72..59044b8 100644
+--- a/libc/sysdeps/linux/i386/bits/kernel_types.h
++++ b/libc/sysdeps/linux/i386/bits/kernel_types.h
+@@ -40,6 +40,8 @@ typedef unsigned int __kernel_gid32_t;
+ typedef unsigned short __kernel_old_uid_t;
+ typedef unsigned short __kernel_old_gid_t;
+ typedef __kernel_dev_t __kernel_old_dev_t;
++typedef long __kernel_long_t;
++typedef unsigned long __kernel_ulong_t;
+ typedef long long __kernel_loff_t;
+
+ typedef struct {
+diff --git a/libc/sysdeps/linux/ia64/bits/kernel_types.h b/libc/sysdeps/linux/ia64/bits/kernel_types.h
+index c8ef86d..e31dc65 100644
+--- a/libc/sysdeps/linux/ia64/bits/kernel_types.h
++++ b/libc/sysdeps/linux/ia64/bits/kernel_types.h
+@@ -52,5 +52,7 @@ typedef __kernel_gid_t __kernel_gid32_t;
+
+ typedef unsigned int __kernel_dev_t;
+ typedef unsigned int __kernel_old_dev_t;
++typedef long __kernel_long_t;
++typedef unsigned long __kernel_ulong_t;
+
+ #endif /* _ASM_IA64_POSIX_TYPES_H */
+diff --git a/libc/sysdeps/linux/m68k/bits/kernel_types.h b/libc/sysdeps/linux/m68k/bits/kernel_types.h
+index 0a77a8f..176b968 100644
+--- a/libc/sysdeps/linux/m68k/bits/kernel_types.h
++++ b/libc/sysdeps/linux/m68k/bits/kernel_types.h
+@@ -32,6 +32,8 @@ typedef unsigned short __kernel_old_uid_t;
+ typedef unsigned short __kernel_old_gid_t;
+ typedef long long __kernel_loff_t;
+ typedef __kernel_dev_t __kernel_old_dev_t;
++typedef long __kernel_long_t;
++typedef unsigned long __kernel_ulong_t;
+
+ typedef struct {
+ #ifdef __USE_ALL
+diff --git a/libc/sysdeps/linux/microblaze/bits/kernel_types.h b/libc/sysdeps/linux/microblaze/bits/kernel_types.h
+index 2a70575..a9f736b 100644
+--- a/libc/sysdeps/linux/microblaze/bits/kernel_types.h
++++ b/libc/sysdeps/linux/microblaze/bits/kernel_types.h
+@@ -44,6 +44,8 @@ typedef unsigned int __kernel_gid32_t;
+ typedef unsigned int __kernel_old_uid_t;
+ typedef unsigned int __kernel_old_gid_t;
+ typedef unsigned int __kernel_old_dev_t;
++typedef long __kernel_long_t;
++typedef unsigned long __kernel_ulong_t;
+
+ #ifdef __GNUC__
+ typedef long long __kernel_loff_t;
+diff --git a/libc/sysdeps/linux/mips/bits/kernel_types.h b/libc/sysdeps/linux/mips/bits/kernel_types.h
+index 9fc3b96..97faeac 100644
+--- a/libc/sysdeps/linux/mips/bits/kernel_types.h
++++ b/libc/sysdeps/linux/mips/bits/kernel_types.h
+@@ -32,6 +32,8 @@ typedef int __kernel_gid32_t;
+ typedef __kernel_uid_t __kernel_old_uid_t;
+ typedef __kernel_gid_t __kernel_old_gid_t;
+ typedef __kernel_dev_t __kernel_old_dev_t;
++typedef long __kernel_long_t;
++typedef unsigned long __kernel_ulong_t;
+ typedef long long __kernel_loff_t;
+ #else
+ typedef unsigned int __kernel_dev_t;
+@@ -68,6 +70,8 @@ typedef int __kernel_gid32_t;
+ typedef __kernel_uid_t __kernel_old_uid_t;
+ typedef __kernel_gid_t __kernel_old_gid_t;
+ typedef __kernel_dev_t __kernel_old_dev_t;
++typedef long __kernel_long_t;
++typedef unsigned long __kernel_ulong_t;
+ typedef long long __kernel_loff_t;
+ #endif
+
+diff --git a/libc/sysdeps/linux/nios2/bits/kernel_types.h b/libc/sysdeps/linux/nios2/bits/kernel_types.h
+index 8b86d79..3c030e7 100644
+--- a/libc/sysdeps/linux/nios2/bits/kernel_types.h
++++ b/libc/sysdeps/linux/nios2/bits/kernel_types.h
+@@ -31,6 +31,8 @@ typedef unsigned int __kernel_gid32_t;
+ typedef unsigned short __kernel_old_uid_t;
+ typedef unsigned short __kernel_old_gid_t;
+ typedef unsigned short __kernel_old_dev_t;
++typedef long __kernel_long_t;
++typedef unsigned long __kernel_ulong_t;
+ typedef long long __kernel_loff_t;
+
+ typedef struct {
+diff --git a/libc/sysdeps/linux/powerpc/bits/kernel_types.h b/libc/sysdeps/linux/powerpc/bits/kernel_types.h
+index 3f3b933..1167de2 100644
+--- a/libc/sysdeps/linux/powerpc/bits/kernel_types.h
++++ b/libc/sysdeps/linux/powerpc/bits/kernel_types.h
+@@ -36,6 +36,8 @@ typedef unsigned int __kernel_gid32_t;
+ typedef unsigned int __kernel_old_uid_t;
+ typedef unsigned int __kernel_old_gid_t;
+ typedef __kernel_dev_t __kernel_old_dev_t;
++typedef long __kernel_long_t;
++typedef unsigned long __kernel_ulong_t;
+ #else
+ typedef unsigned int __kernel_dev_t;
+ typedef unsigned int __kernel_ino_t;
+@@ -61,6 +63,8 @@ typedef unsigned int __kernel_gid32_t;
+ typedef unsigned int __kernel_old_uid_t;
+ typedef unsigned int __kernel_old_gid_t;
+ typedef __kernel_dev_t __kernel_old_dev_t;
++typedef long __kernel_long_t;
++typedef unsigned long __kernel_ulong_t;
+ typedef long long __kernel_loff_t;
+ #endif
+
+diff --git a/libc/sysdeps/linux/sh/bits/kernel_types.h b/libc/sysdeps/linux/sh/bits/kernel_types.h
+index f96e9fa..ac97261 100644
+--- a/libc/sysdeps/linux/sh/bits/kernel_types.h
++++ b/libc/sysdeps/linux/sh/bits/kernel_types.h
+@@ -32,6 +32,8 @@ typedef unsigned int __kernel_gid32_t;
+ typedef unsigned short __kernel_old_uid_t;
+ typedef unsigned short __kernel_old_gid_t;
+ typedef __kernel_dev_t __kernel_old_dev_t;
++typedef long __kernel_long_t;
++typedef unsigned long __kernel_ulong_t;
+ typedef long long __kernel_loff_t;
+
+ typedef struct {
+diff --git a/libc/sysdeps/linux/sh64/bits/kernel_types.h b/libc/sysdeps/linux/sh64/bits/kernel_types.h
+index 671cc83..8cc6c61 100644
+--- a/libc/sysdeps/linux/sh64/bits/kernel_types.h
++++ b/libc/sysdeps/linux/sh64/bits/kernel_types.h
+@@ -43,6 +43,8 @@ typedef unsigned int __kernel_gid32_t;
+ typedef unsigned short __kernel_old_uid_t;
+ typedef unsigned short __kernel_old_gid_t;
+ typedef __kernel_dev_t __kernel_old_dev_t;
++typedef long __kernel_long_t;
++typedef unsigned long __kernel_ulong_t;
+ typedef long long __kernel_loff_t;
+
+ typedef struct {
+diff --git a/libc/sysdeps/linux/sparc/bits/kernel_types.h b/libc/sysdeps/linux/sparc/bits/kernel_types.h
+index 0cc4bc2..a10e075 100644
+--- a/libc/sysdeps/linux/sparc/bits/kernel_types.h
++++ b/libc/sysdeps/linux/sparc/bits/kernel_types.h
+@@ -32,6 +32,8 @@ typedef unsigned short __kernel_gid16_t;
+ typedef __kernel_uid_t __kernel_old_uid_t;
+ typedef __kernel_gid_t __kernel_old_gid_t;
+ typedef __kernel_dev_t __kernel_old_dev_t;
++typedef long __kernel_long_t;
++typedef unsigned long __kernel_ulong_t;
+ typedef __kernel_uid_t __kernel_uid32_t;
+ typedef __kernel_gid_t __kernel_gid32_t;
+ typedef int __kernel_suseconds_t;
+@@ -62,6 +64,8 @@ typedef unsigned int __kernel_gid32_t;
+ typedef unsigned short __kernel_old_uid_t;
+ typedef unsigned short __kernel_old_gid_t;
+ typedef __kernel_dev_t __kernel_old_dev_t;
++typedef long __kernel_long_t;
++typedef unsigned long __kernel_ulong_t;
+ typedef long long __kernel_loff_t;
+ #endif
+
+diff --git a/libc/sysdeps/linux/v850/bits/kernel_types.h b/libc/sysdeps/linux/v850/bits/kernel_types.h
+index 3e851ab..780aa8a 100644
+--- a/libc/sysdeps/linux/v850/bits/kernel_types.h
++++ b/libc/sysdeps/linux/v850/bits/kernel_types.h
+@@ -41,6 +41,8 @@ typedef unsigned int __kernel_gid32_t;
+ typedef unsigned short __kernel_old_uid_t;
+ typedef unsigned short __kernel_old_gid_t;
+ typedef __kernel_dev_t __kernel_old_dev_t;
++typedef long __kernel_long_t;
++typedef unsigned long __kernel_ulong_t;
+
+ typedef struct {
+ #ifdef __USE_ALL
+diff --git a/libc/sysdeps/linux/x86_64/bits/kernel_types.h b/libc/sysdeps/linux/x86_64/bits/kernel_types.h
+index de800d7..0cae08c 100644
+--- a/libc/sysdeps/linux/x86_64/bits/kernel_types.h
++++ b/libc/sysdeps/linux/x86_64/bits/kernel_types.h
+@@ -40,6 +40,8 @@ typedef unsigned int __kernel_gid32_t;
+ typedef unsigned short __kernel_old_uid_t;
+ typedef unsigned short __kernel_old_gid_t;
+ typedef __kernel_dev_t __kernel_old_dev_t;
++typedef long __kernel_long_t;
++typedef unsigned long __kernel_ulong_t;
+ typedef long long __kernel_loff_t;
+
+ typedef struct {
+diff --git a/libc/sysdeps/linux/xtensa/bits/kernel_types.h b/libc/sysdeps/linux/xtensa/bits/kernel_types.h
+index 44f1075..ed38f2e 100644
+--- a/libc/sysdeps/linux/xtensa/bits/kernel_types.h
++++ b/libc/sysdeps/linux/xtensa/bits/kernel_types.h
+@@ -33,6 +33,8 @@ typedef unsigned int __kernel_gid32_t;
+ typedef unsigned short __kernel_old_uid_t;
+ typedef unsigned short __kernel_old_gid_t;
+ typedef unsigned short __kernel_old_dev_t;
++typedef long __kernel_long_t;
++typedef unsigned long __kernel_ulong_t;
+ typedef long long __kernel_loff_t;
+
+ /* Beginning in 2.6 kernels, which is the first version that includes the
+--
+cgit v0.9.0.1-2-gef13