ARM: dts: stout: Initial r8a7790 Stout board support

Stout base board support making use of 1 GiB of memory,
the Renesas H2 r8a7790 SoC with the SCIFA0 serial port
and CA15 with ARM architected timer.

Furthermore, this device tree contains entries for:
  - 4x LEDs
  - SDHI SD/MMC controller
  - Display unit with HDMI output
  - SH fast ethernet controller
  - QSPI controller with S25FL512S attached to it
  - I2C controller with DA9210 and DA 9063 PMICs

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index ade7a38543dc95a3b58a8b5955337fd3da76dd93..2b6dfeea1dba9c1f418a35fc55bcad7e746f371d 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -784,6 +784,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \
        r8a7778-bockw.dtb \
        r8a7779-marzen.dtb \
        r8a7790-lager.dtb \
+       r8a7790-stout.dtb \
        r8a7791-koelsch.dtb \
        r8a7791-porter.dtb \
        r8a7792-blanche.dtb \

diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts
new file mode 100644 (file)
index 0000000..a13a92c
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7790-stout.dts
@@ -0,0 +1,363 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Stout board
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+/dts-v1/;
+#include "r8a7790.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Stout";
+       compatible = "renesas,stout", "renesas,r8a7790";
+
+       aliases {
+               serial0 = &scifa0;
+       };
+
+       chosen {
+               bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+               stdout-path = "serial0:115200n8";
+       };
+
+       memory@40000000 {
+               device_type = "memory";
+               reg = <0 0x40000000 0 0x40000000>;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               led1 {
+                       gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+               };
+               led2 {
+                       gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
+               };
+               led3 {
+                       gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+               };
+               led5 {
+                       gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       fixedregulator3v3: regulator-3v3 {
+               compatible = "regulator-fixed";
+               regulator-name = "fixed-3.3V";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-boot-on;
+               regulator-always-on;
+       };
+
+       vcc_sdhi0: regulator-vcc-sdhi0 {
+               compatible = "regulator-fixed";
+
+               regulator-name = "SDHI0 Vcc";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+
+               gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+
+       hdmi-out {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con_out: endpoint {
+                               remote-endpoint = <&adv7511_out>;
+                       };
+               };
+       };
+
+       osc1_clk: osc1-clock {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <148500000>;
+       };
+
+       osc4_clk: osc4-clock {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <12000000>;
+       };
+};
+
+&du {
+       pinctrl-0 = <&du_pins>;
+       pinctrl-names = "default";
+       status = "okay";
+
+       clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>,
+                <&cpg CPG_MOD 726>, <&cpg CPG_MOD 725>,
+                <&osc1_clk>;
+       clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1", "dclkin.0";
+
+       ports {
+               port@0 {
+                       endpoint {
+                               remote-endpoint = <&adv7511_in>;
+                       };
+               };
+               port@1 {
+                       lvds_connector0: endpoint {
+                       };
+               };
+               port@2 {
+                       lvds_connector1: endpoint {
+                       };
+               };
+       };
+};
+
+&extal_clk {
+       clock-frequency = <20000000>;
+};
+
+&pfc {
+
+       pinctrl-0 = <&scif_clk_pins>;
+       pinctrl-names = "default";
+
+       du_pins: du {
+               groups = "du_rgb888", "du_sync_1", "du_clk_out_0";
+               function = "du";
+       };
+
+       scifa0_pins: scifa0 {
+               groups = "scifa0_data_b";
+               function = "scifa0";
+       };
+
+       scif_clk_pins: scif_clk {
+               groups = "scif_clk";
+               function = "scif_clk";
+       };
+
+       ether_pins: ether {
+               groups = "eth_link", "eth_mdio", "eth_rmii";
+               function = "eth";
+       };
+
+       phy1_pins: phy1 {
+               groups = "intc_irq1";
+               function = "intc";
+       };
+
+       sdhi0_pins: sd0 {
+               groups = "sdhi0_data4", "sdhi0_ctrl";
+               function = "sdhi0";
+               power-source = <3300>;
+       };
+
+       qspi_pins: qspi {
+               groups = "qspi_ctrl", "qspi_data4";
+               function = "qspi";
+       };
+
+       iic2_pins: iic2 {
+               groups = "iic2_b";
+               function = "iic2";
+       };
+
+       iic3_pins: iic3 {
+               groups = "iic3";
+               function = "iic3";
+       };
+
+       usb0_pins: usb0 {
+               groups = "usb0";
+               function = "usb0";
+       };
+};
+
+&ether {
+       pinctrl-0 = <&ether_pins &phy1_pins>;
+       pinctrl-names = "default";
+
+       phy-handle = <&phy1>;
+       renesas,ether-link-active-low;
+       status = "okay";
+
+       phy1: ethernet-phy@1 {
+               reg = <1>;
+               interrupt-parent = <&irqc0>;
+               interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+               micrel,led-mode = <1>;
+       };
+};
+
+&cmt0 {
+       status = "okay";
+};
+
+&qspi {
+       pinctrl-0 = <&qspi_pins>;
+       pinctrl-names = "default";
+
+       status = "okay";
+
+       flash: flash@0 {
+               compatible = "spansion,s25fl512s", "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <30000000>;
+               spi-tx-bus-width = <4>;
+               spi-rx-bus-width = <4>;
+               spi-cpha;
+               spi-cpol;
+               m25p,fast-read;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "loader";
+                               reg = <0x00000000 0x00080000>;
+                               read-only;
+                       };
+                       partition@80000 {
+                               label = "uboot";
+                               reg = <0x00080000 0x00040000>;
+                               read-only;
+                       };
+                       partition@c0000 {
+                               label = "uboot-env";
+                               reg = <0x000c0000 0x00040000>;
+                               read-only;
+                       };
+                       partition@100000 {
+                               label = "flash";
+                               reg = <0x00100000 0x03f00000>;
+                       };
+               };
+       };
+};
+
+&scifa0 {
+       pinctrl-0 = <&scifa0_pins>;
+       pinctrl-names = "default";
+
+       status = "okay";
+};
+
+&scif_clk {
+       clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+       pinctrl-0 = <&sdhi0_pins>;
+       pinctrl-names = "default";
+
+       vmmc-supply = <&vcc_sdhi0>;
+       cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+       status = "okay";
+};
+
+&cpu0 {
+       cpu0-supply = <&vdd_dvfs>;
+};
+
+&iic2  {
+       status = "okay";
+       pinctrl-0 = <&iic2_pins>;
+       pinctrl-names = "default";
+
+       clock-frequency = <100000>;
+
+       hdmi@39 {
+               compatible = "adi,adv7511w";
+               reg = <0x39>;
+               interrupt-parent = <&gpio1>;
+               interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+               clocks = <&osc4_clk>;
+               clock-names = "cec";
+
+               adi,input-depth = <8>;
+               adi,input-colorspace = "rgb";
+               adi,input-clock = "1x";
+               adi,input-style = <1>;
+               adi,input-justification = "evenly";
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+                               adv7511_in: endpoint {
+                                       remote-endpoint = <&du_out_rgb>;
+                               };
+                       };
+
+                       port@1 {
+                               reg = <1>;
+                               adv7511_out: endpoint {
+                                       remote-endpoint = <&hdmi_con_out>;
+                               };
+                       };
+               };
+       };
+};
+
+&iic3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&iic3_pins>;
+       status = "okay";
+
+       pmic@58 {
+               compatible = "dlg,da9063";
+               reg = <0x58>;
+               interrupt-parent = <&irqc0>;
+               interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+               interrupt-controller;
+
+               rtc {
+                       compatible = "dlg,da9063-rtc";
+               };
+
+               wdt {
+                       compatible = "dlg,da9063-watchdog";
+               };
+       };
+
+       vdd_dvfs: regulator@68 {
+               compatible = "dlg,da9210";
+               reg = <0x68>;
+               interrupt-parent = <&irqc0>;
+               interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+               regulator-min-microvolt = <1000000>;
+               regulator-max-microvolt = <1000000>;
+               regulator-boot-on;
+               regulator-always-on;
+       };
+
+       vdd: regulator@70 {
+               compatible = "dlg,da9210";
+               reg = <0x70>;
+               interrupt-parent = <&irqc0>;
+               interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+               regulator-min-microvolt = <1000000>;
+               regulator-max-microvolt = <1000000>;
+               regulator-boot-on;
+               regulator-always-on;
+       };
+};
+
+&pci0 {
+       status = "okay";
+       pinctrl-0 = <&usb0_pins>;
+       pinctrl-names = "default";
+};
+
+&usbphy {
+       status = "okay";
+};