Move up dependency versions in user guide

Move up the version numbers in the user guide of:

 * DS-5 (to v5.22)
 * Base FVP (to 7.0)
 * Foundation FVP (to 9.4)
 * Linaro release (to 15.10)

Note that, starting from Linaro release 15.10, the related release
instructions have migrated from http://releases.linaro.org to the
ARM Connected Community website. The URLs in the User Guide have
been updated accordingly.

The 'libssl-dev' package has been removed from the list of
prerequisite tools, as it is already referenced on the ARM Connected
Community page. Also, the 'device-tree-compiler' package has been
marked as an optional dependency, since the Trusted Firmware
repository provides the prebuilt DTB files. Hence, this tool is
needed only when the user wants to rebuild the DTS files.

Change-Id: I4a172ece60bf90437131c6b96e73a9f1e9b40117

diff --git a/docs/user-guide.md b/docs/user-guide.md
index 716ed7d877f364a0f39c7622cc83a45ef07e90b8..0d2e7065f30ff0d8ecfb8a68e04cc2dda9d1251e 100644 (file)
--- a/docs/user-guide.md
+++ b/docs/user-guide.md
@@ -25,7 +25,7 @@ possible to use other software components, configurations and platforms but that
 is outside the scope of this document.
 
 This document should be used in conjunction with the [Firmware Design] and the
-[Linaro release notes][Linaro releases].
+[Instructions for using the Linaro software deliverables][Linaro SW Instructions].
 
 
 2.  Host machine requirements
@@ -43,17 +43,14 @@ specified.
 3.  Tools
 ---------
 
-In addition to the prerequisite tools listed on the
-[Linaro release notes][Linaro releases], the following tools are needed to use
-the ARM Trusted Firmware:
+In addition to the mandatory prerequisite tools listed in the [instructions for
+using the Linaro software deliverables][Linaro SW Instructions], the following
+optional tools may be needed:
 
-*   `device-tree-compiler` package for building the Flattened Device Tree (FDT)
-    source files (`.dts` files) provided with this software.
+*   `device-tree-compiler` package if you need to rebuild the Flattened Device
+    Tree (FDT) source files (`.dts` files) provided with this software.
 
-*   `libssl-dev` package to build the certificate generation tool when support
-    for Trusted Board Boot is needed.
-
-*   (Optional) For debugging, ARM [Development Studio 5 (DS-5)][DS-5] v5.21.
+*   For debugging, ARM [Development Studio 5 (DS-5)][DS-5] v5.22.
 
 
 4.  Getting the Trusted Firmware source code
@@ -62,10 +59,8 @@ the ARM Trusted Firmware:
 The Trusted Firmware source code can be obtained as part of the standard Linaro
 releases, which provide a full software stack, including the Trusted Firmware,
 normal world firmware, Linux kernel and device tree, file system as well as any
-additional micro-controller firmware required by the platform. Please follow the
-instructions on the [Linaro release notes][Linaro releases], section 2.2
-"Downloading the software sources" and section 2.3 "Downloading the filesystem
-binaries".
+additional micro-controller firmware required by the platform. This version of
+Trusted Firmware is tested with the [Linaro 15.10 Release][Linaro Release Notes].
 
 Note: Both the LSK kernel or the latest tracking kernel can be used along the
 ARM Trusted Firmware, choose the one that best suits your needs.
@@ -841,11 +836,11 @@ which the FVP is launched. Alternatively a symbolic link may be used.
 This version of the ARM Trusted Firmware has been tested on the following ARM
 FVPs (64-bit versions only).
 
-*   `Foundation_Platform` (Version 9.1, Build 9.1.33)
-*   `FVP_Base_AEMv8A-AEMv8A` (Version 6.2, Build 0.8.6202)
-*   `FVP_Base_Cortex-A57x4-A53x4` (Version 6.2, Build 0.8.6202)
-*   `FVP_Base_Cortex-A57x1-A53x1` (Version 6.2, Build 0.8.6202)
-*   `FVP_Base_Cortex-A57x2-A53x4` (Version 6.2, Build 0.8.6202)
+*   `Foundation_Platform` (Version 9.4, Build 9.4.59)
+*   `FVP_Base_AEMv8A-AEMv8A` (Version 7.0, Build 0.8.7004)
+*   `FVP_Base_Cortex-A57x4-A53x4` (Version 7.0, Build 0.8.7004)
+*   `FVP_Base_Cortex-A57x1-A53x1` (Version 7.0, Build 0.8.7004)
+*   `FVP_Base_Cortex-A57x2-A53x4` (Version 7.0, Build 0.8.7004)
 
 NOTE: The build numbers quoted above are those reported by launching the FVP
 with the `--version` parameter.
@@ -855,13 +850,17 @@ The commands below would report an `unhandled argument` error in this case.
 
 NOTE: The Foundation FVP does not provide a debugger interface.
 
-Please refer to the FVP documentation for a detailed description of the model
-parameter options. A brief description of the important ones that affect the
-ARM Trusted Firmware and normal world software behavior is provided below.
-
 The Foundation FVP is a cut down version of the AArch64 Base FVP. It can be
 downloaded for free from [ARM's website][ARM FVP website].
 
+The Linaro release provides a script to run the software on FVP. However, it
+only supports a limited number of model parameter options. Therefore, it is
+recommended to launch the FVP manually for all use cases described below.
+
+Please refer to the FVP documentation for a detailed description of the model
+parameter options. A brief description of the important ones that affect the ARM
+Trusted Firmware and normal world software behavior is provided below.
+
 
 ### Running on the Foundation FVP with reset to BL1 entrypoint
 
@@ -1172,13 +1171,11 @@ The following command creates such a file called `mailbox.dat`:
 
 This version of the ARM Trusted Firmware has been tested on Juno r0 and Juno r1.
 
-To execute the versions of software components on Juno referred to in this
-document, the latest Juno board recovery image must be installed. If you
-have an earlier version installed or are unsure which version is installed,
-follow the recovery image update instructions in the [Juno Software Guide]
-on the [ARM Connected Community] website. The latest Juno board recovery image
-can be obtained from [Linaro releases], see section 2.7 "Using prebuilt
-binaries".
+To execute the software stack on Juno, the version of the Juno board recovery
+image indicated in the [Linaro Release Notes] must be installed. If you have an
+earlier version installed or are unsure which version is installed, please
+re-install the recovery image by following the [Instructions for using Linaro's
+deliverables on Juno][Juno Instructions].
 
 ### Preparing Trusted Firmware images
 
@@ -1193,23 +1190,24 @@ supplied using the `BL30` variable on the command line when building the
 FIP. Please refer to the section "Building the Trusted Firmware".
 
 After building Trusted Firmware, the files `bl1.bin` and `fip.bin` need copying
-to the `SOFTWARE/` directory as explained in the [Juno Software Guide].
+to the `SOFTWARE/` directory of the Juno SD card.
 
 ### Other Juno software information
 
-Please refer to the [Juno Software Guide] to:
-
-*   Install and run the Juno binaries on the board
-*   Obtain any other Juno software information
+Please visit the [ARM Platforms Portal] to get support and obtain any other Juno
+software information. Please also refer to the [Juno Getting Started Guide] to
+get more detailed information about the Juno ARM development platform and how to
+configure it.
 
 ### Testing SYSTEM SUSPEND on Juno
 
 The SYSTEM SUSPEND is a PSCI API which can be used to implement system suspend
-to RAM. For more details refer to section 5.16 of [PSCI]. The [Linaro releases]
-contains the required SCP and motherboard firmware support for this feature on
-Juno. The mainline linux kernel does not yet have support for this feature on
-Juno but it is queued to be merged in v4.4. Till that becomes available, the
-feature can be tested by using a custom kernel built from the following repo:
+to RAM. For more details refer to section 5.16 of [PSCI]. The [Linaro Release
+Notes] point to the required SCP and motherboard firmware binaries supporting
+this feature on Juno. The mainline linux kernel does not yet have support for
+this feature on Juno but it is queued to be merged in v4.4. Till that becomes
+available, the feature can be tested by using a custom kernel built from the
+following repository:
 
     git clone git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/linux.git
     cd linux
@@ -1236,9 +1234,8 @@ Build the kernel
 
     make ARCH=arm64 Image -j8
 
-Replace the kernel image in `SOFTWARE/` directory of Juno with the `Image` from
-arch/arm64/boot/ of the linux directory as explained in the
-[Juno Software Guide].
+Replace the kernel image in the `SOFTWARE/` directory of the Juno SD card with
+the `Image` from `arch/arm64/boot/` of the linux directory.
 
 Reset the board and wait for it to boot. At the shell prompt issue the
 following command:
@@ -1255,10 +1252,12 @@ _Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved._
 
 
 [Firmware Design]:             firmware-design.md
-[Linaro releases]:             http://releases.linaro.org/15.06/members/arm/platforms
 [ARM FVP website]:             http://www.arm.com/fvp
-[ARM Connected Community]:     http://community.arm.com
-[Juno Software Guide]:         http://community.arm.com/docs/DOC-8396
+[Linaro Release Notes]:        https://community.arm.com/docs/DOC-10952#jive_content_id_Linaro_Release_1510
+[ARM Platforms Portal]:        https://community.arm.com/groups/arm-development-platforms
+[Linaro SW Instructions]:      https://community.arm.com/docs/DOC-10803
+[Juno Instructions]:           https://community.arm.com/docs/DOC-10804
+[Juno Getting Started Guide]:  http://infocenter.arm.com/help/topic/com.arm.doc.dui0928e/DUI0928E_juno_arm_development_platform_gsg.pdf
 [DS-5]:                        http://www.arm.com/products/tools/software-tools/ds-5/index.php
 [mbedTLS Repository]:          https://github.com/ARMmbed/mbedtls.git
 [PSCI]:                        http://infocenter.arm.com/help/topic/com.arm.doc.den0022c/DEN0022C_Power_State_Coordination_Interface.pdf "Power State Coordination Interface PDD (ARM DEN 0022C)"