};
};
-
&usb1 {
#address-cells = <1>;
#size-cells = <0>;
};
};
-
ð0 {
status = "okay";
pll-data = <0x11110000 0x00001099 0x00991099>;
model = "Netgear WNR612 v2";
compatible = "netgear,wnr612-v2", "qca,ar7240";
};
-
model = "ON Network N150R";
compatible = "on,n150r", "qca,ar7240";
};
-
};
};
-
ð0 {
status = "okay";
regulator-max-microvolt = <5000000>;
enable-active-high;
};
-
};
&spi {
gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
-
};
&spi {
pinctrl-single,bits = <0x8 0x0 0xff000000>;
};
};
-
status = "okay";
qca,no-eeprom;
};
-
phy-mode = "rgmii";
phy-handle = <&phy0>;
-
aliases {
ag0 = ð1;
};
label = "zbt-wd323:orange:lan2";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};
-
};
};
&led_wlan {
label = "gl-ar300m-lite:green:wlan";
-};
\ No newline at end of file
+};
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
-
};
i2c {
sda-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
scl-gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
-
-
};
&pcie0 {
label = "tp-link:white:wlan5g";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
- };
+ };
qss_led: qss {
label = "tp-link:white:qss";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};
-
#address-cells = <1>;
#size-cells = <0>;
};
-
};
-
};
&cpuintc {
phy-mode = "mii";
};
-
&mdio1 {
status = "okay";
resets = <&rst 23>;
linux,default-trigger = "phy0tpt";
};
};
-
};
&spi {
linux,default-trigger = "phy0tpt";
};
};
-
};
&spi {
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
};
-
gpio_export {
compatible = "gpio-export";
reg = <0xff0000 0x010000>;
read-only;
};
-
};
};
};
label = "librerouter-v1:blue:status";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
-
};
button {
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
-
};
watchdog {
hw_margin_ms = <1000>;
always-running;
};
-
};
&pcie0 {
mtd-mac-address = <&art 0x0>;
phy-handle = <&phy0>;
-
};
ð1 {
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
-
};
-
};
&pcie1 {
gpio-export,output = <1>;
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
};
-
};
};
debounce-interval = <60>;
};
};
-
};
&pcie0 {
reg = <0xff0000 0x010000>;
read-only;
};
-
};
};
};
};
};
-
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
gpio-export,output = <1>;
gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
};
-
};
};
debounce-interval = <60>;
};
};
-
};
&pcie {
label = "ubnt:blue:dome";
gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
};
-
};
keys {
projects / openwrt / staging / stintel.git / commitdiff