ath9k: Nuke struct ath_tx_ratectrl_state

Move its only member (u8 per) to struct ath_rate_priv.

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index a97dd7b6b706ae8fd2a7c8aebf0c9d8a193dfcda..a07efa22551e3a4e0bf956531812e151b79b3b5b 100644 (file)
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -636,7 +636,7 @@ static u8 ath_rc_get_highest_rix(struct ath_softc *sc,
                 * 10-15 and we would be worse off then staying
                 * at the current rate.
                 */
-               per_thres = ath_rc_priv->state[rate].per;
+               per_thres = ath_rc_priv->per[rate];
                if (per_thres < 12)
                        per_thres = 12;
 
@@ -881,13 +881,13 @@ static bool ath_rc_update_per(struct ath_softc *sc,
                100 * 9 / 10
        };
 
-       last_per = ath_rc_priv->state[tx_rate].per;
+       last_per = ath_rc_priv->per[tx_rate];
 
        if (xretries) {
                if (xretries == 1) {
-                       ath_rc_priv->state[tx_rate].per += 30;
-                       if (ath_rc_priv->state[tx_rate].per > 100)
-                               ath_rc_priv->state[tx_rate].per = 100;
+                       ath_rc_priv->per[tx_rate] += 30;
+                       if (ath_rc_priv->per[tx_rate] > 100)
+                               ath_rc_priv->per[tx_rate] = 100;
                } else {
                        /* xretries == 2 */
                        count = ARRAY_SIZE(nretry_to_per_lookup);
@@ -895,7 +895,7 @@ static bool ath_rc_update_per(struct ath_softc *sc,
                                retries = count - 1;
 
                        /* new_PER = 7/8*old_PER + 1/8*(currentPER) */
-                       ath_rc_priv->state[tx_rate].per =
+                       ath_rc_priv->per[tx_rate] =
                                (u8)(last_per - (last_per >> 3) + (100 >> 3));
                }
 
@@ -931,10 +931,10 @@ static bool ath_rc_update_per(struct ath_softc *sc,
                                n_frames = tx_info_priv->n_frames * (retries + 1);
                                cur_per = (100 * n_bad_frames / n_frames) >> 3;
                                new_per = (u8)(last_per - (last_per >> 3) + cur_per);
-                               ath_rc_priv->state[tx_rate].per = new_per;
+                               ath_rc_priv->per[tx_rate] = new_per;
                        }
                } else {
-                       ath_rc_priv->state[tx_rate].per =
+                       ath_rc_priv->per[tx_rate] =
                                (u8)(last_per - (last_per >> 3) +
                                     (nretry_to_per_lookup[retries] >> 3));
                }
@@ -962,8 +962,8 @@ static bool ath_rc_update_per(struct ath_softc *sc,
                                        ath_rc_priv->probe_rate;
                                probe_rate = ath_rc_priv->probe_rate;
 
-                               if (ath_rc_priv->state[probe_rate].per > 30)
-                                       ath_rc_priv->state[probe_rate].per = 20;
+                               if (ath_rc_priv->per[probe_rate] > 30)
+                                       ath_rc_priv->per[probe_rate] = 20;
 
                                ath_rc_priv->probe_rate = 0;
 
@@ -1018,7 +1018,7 @@ static void ath_rc_update_ht(struct ath_softc *sc,
        if ((tx_rate < 0) || (tx_rate > rate_table->rate_cnt))
                return;
 
-       last_per = ath_rc_priv->state[tx_rate].per;
+       last_per = ath_rc_priv->per[tx_rate];
 
        /* Update PER first */
        state_change = ath_rc_update_per(sc, rate_table, ath_rc_priv,
@@ -1029,7 +1029,7 @@ static void ath_rc_update_ht(struct ath_softc *sc,
         * If this rate looks bad (high PER) then stop using it for
         * a while (except if we are probing).
         */
-       if (ath_rc_priv->state[tx_rate].per >= 55 && tx_rate > 0 &&
+       if (ath_rc_priv->per[tx_rate] >= 55 && tx_rate > 0 &&
            rate_table->info[tx_rate].ratekbps <=
            rate_table->info[ath_rc_priv->rate_max_phy].ratekbps) {
                ath_rc_get_lower_rix(rate_table, ath_rc_priv,
@@ -1041,26 +1041,26 @@ static void ath_rc_update_ht(struct ath_softc *sc,
 
        /* Make sure the rates below this have lower PER */
        /* Monotonicity is kept only for rates below the current rate. */
-       if (ath_rc_priv->state[tx_rate].per < last_per) {
+       if (ath_rc_priv->per[tx_rate] < last_per) {
                for (rate = tx_rate - 1; rate >= 0; rate--) {
                        if (rate_table->info[rate].phy !=
                            rate_table->info[tx_rate].phy)
                                break;
 
-                       if (ath_rc_priv->state[rate].per >
-                           ath_rc_priv->state[rate+1].per) {
-                               ath_rc_priv->state[rate].per =
-                                       ath_rc_priv->state[rate+1].per;
+                       if (ath_rc_priv->per[rate] >
+                           ath_rc_priv->per[rate+1]) {
+                               ath_rc_priv->per[rate] =
+                                       ath_rc_priv->per[rate+1];
                        }
                }
        }
 
        /* Maintain monotonicity for rates above the current rate */
        for (rate = tx_rate; rate < size - 1; rate++) {
-               if (ath_rc_priv->state[rate+1].per <
-                   ath_rc_priv->state[rate].per)
-                       ath_rc_priv->state[rate+1].per =
-                               ath_rc_priv->state[rate].per;
+               if (ath_rc_priv->per[rate+1] <
+                   ath_rc_priv->per[rate])
+                       ath_rc_priv->per[rate+1] =
+                               ath_rc_priv->per[rate];
        }
 
        /* Every so often, we reduce the thresholds
@@ -1068,15 +1068,15 @@ static void ath_rc_update_ht(struct ath_softc *sc,
        if (now_msec - ath_rc_priv->per_down_time >=
            rate_table->probe_interval) {
                for (rate = 0; rate < size; rate++) {
-                       ath_rc_priv->state[rate].per =
-                               7 * ath_rc_priv->state[rate].per / 8;
+                       ath_rc_priv->per[rate] =
+                               7 * ath_rc_priv->per[rate] / 8;
                }
 
                ath_rc_priv->per_down_time = now_msec;
        }
 
        ath_debug_stat_retries(sc, tx_rate, xretries, retries,
-                              ath_rc_priv->state[tx_rate].per);
+                              ath_rc_priv->per[tx_rate]);
 
 }
 
@@ -1213,7 +1213,7 @@ static void ath_rc_init(struct ath_softc *sc,
 
        /* Initialize thresholds according to the global rate table */
        for (i = 0 ; i < ath_rc_priv->rate_table_size; i++) {
-               ath_rc_priv->state[i].per = 0;
+               ath_rc_priv->per[i] = 0;
        }
 
        /* Determine the valid rates */

diff --git a/drivers/net/wireless/ath/ath9k/rc.h b/drivers/net/wireless/ath/ath9k/rc.h
index c794d6c82ad4a478110a49e90f109403f05783bb..fa21a628ddd05d686e14eca2188fd31ca51e024f 100644 (file)
--- a/drivers/net/wireless/ath/ath9k/rc.h
+++ b/drivers/net/wireless/ath/ath9k/rc.h
@@ -122,10 +122,6 @@ struct ath_rate_table {
        u8 initial_ratemax;
 };
 
-struct ath_tx_ratectrl_state {
-       u8 per;                 /* recent estimate of packet error rate (%) */
-};
-
 struct ath_rateset {
        u8 rs_nrates;
        u8 rs_rates[ATH_RATE_MAX];
@@ -141,6 +137,7 @@ struct ath_rateset {
  * @per_down_time: msec timestamp for last PER down step
  * @valid_phy_ratecnt: valid rate count
  * @rate_max_phy: phy index for the max rate
+ * @per: PER for every valid rate in %
  * @probe_interval: interval for ratectrl to probe for other rates
  * @prev_data_rix: rate idx of last data frame
  * @ht_cap: HT capabilities
@@ -157,12 +154,12 @@ struct ath_rate_priv {
        u8 valid_phy_ratecnt[WLAN_RC_PHY_MAX];
        u8 valid_phy_rateidx[WLAN_RC_PHY_MAX][RATE_TABLE_SIZE];
        u8 rate_max_phy;
+       u8 per[RATE_TABLE_SIZE];
        u32 probe_time;
        u32 per_down_time;
        u32 probe_interval;
        u32 prev_data_rix;
        u32 tx_triglevel_max;
-       struct ath_tx_ratectrl_state state[RATE_TABLE_SIZE];
        struct ath_rateset neg_rates;
        struct ath_rateset neg_ht_rates;
        struct ath_rate_softc *asc;