#define DRV_VERSION "0.3"
/* Addresses to scan: none. This chip cannot be detected. */
-static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
/* Insmod parameters */
I2C_CLIENT_INSMOD;
/* i2c configuration */
#define ISL1208_I2C_ADDR 0xde
-static unsigned short normal_i2c[] = {
+static const unsigned short normal_i2c[] = {
ISL1208_I2C_ADDR>>1, I2C_CLIENT_END
};
I2C_CLIENT_INSMOD; /* defines addr_data */
#define MAX6900_I2C_ADDR 0xa0
-static unsigned short normal_i2c[] = {
+static const unsigned short normal_i2c[] = {
MAX6900_I2C_ADDR >> 1,
I2C_CLIENT_END
};
* located at 0x51 will pass the validation routine due to
* the way the registers are implemented.
*/
-static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
/* Module parameters */
I2C_CLIENT_INSMOD;
#define CTRL_ALARM 0x02
#define CTRL_TIMER 0x01
-static unsigned short normal_i2c[] = { 0x50, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x50, I2C_CLIENT_END };
/* Module parameters */
I2C_CLIENT_INSMOD;
* unknown chips, the user must explicitly set the probe parameter.
*/
-static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
/* Insmod parameters */
I2C_CLIENT_INSMOD;