Add support for VersaLink modem control on DCE ports 0 and 3

SVN-Revision: 7144

diff --git a/target/linux/at91-2.6/patches/008-fdl-serial.patch b/target/linux/at91-2.6/patches/008-fdl-serial.patch
new file mode 100644 (file)
index 0000000..2260ffb
--- /dev/null
+++ b/target/linux/at91-2.6/patches/008-fdl-serial.patch
@@ -0,0 +1,71 @@
+--- linux-2.6.19.2.old/drivers/serial/atmel_serial.c   2007-05-01 13:08:03.000000000 +0200
++++ linux-2.6.19.2/drivers/serial/atmel_serial.c       2007-05-09 10:21:45.000000000 +0200
+@@ -173,6 +173,34 @@
+                               at91_set_gpio_value(AT91_PIN_PA21, 0);
+                       else
+                               at91_set_gpio_value(AT91_PIN_PA21, 1);
++
++                      /* 
++                       * FDL VersaLink adds GPIOS to provide full modem control on
++                       * USART 0 - Drive DTR and RI pins manually
++                       */
++                      if (mctrl & TIOCM_DTR)
++                              at91_set_gpio_value(AT91_PIN_PA19, 0);
++                      else
++                              at91_set_gpio_value(AT91_PIN_PA19, 1);
++                      if (mctrl & TIOCM_RI)
++                              at91_set_gpio_value(AT91_PIN_PB7, 0);
++                      else
++                              at91_set_gpio_value(AT91_PIN_PB7, 1);
++              }
++
++              /* 
++               * FDL VersaLink adds GPIOS to provide full modem control on
++               * USART 3 - Drive DTR and RI pins manually
++               */
++              if (port->mapbase == AT91RM9200_BASE_US3) {
++                      if (mctrl & TIOCM_DTR)
++                              at91_set_gpio_value(AT91_PIN_PA24, 0);
++                      else
++                              at91_set_gpio_value(AT91_PIN_PA24, 1);
++                      if (mctrl & TIOCM_RI)
++                              at91_set_gpio_value(AT91_PIN_PB2, 0);
++                      else
++                              at91_set_gpio_value(AT91_PIN_PB2, 1);
+               }
+       }
+ #endif
+@@ -210,8 +238,14 @@
+       /*
+        * The control signals are active low.
+        */
+-      if (!(status & ATMEL_US_DCD))
+-              ret |= TIOCM_CD;
++
++      /* 
++       * Ignore DCD reister for USARTS 0 and 3 as FDL Versalink uses
++       * GPIO's for these signals
++       */
++      if (!(port->mapbase == AT91RM9200_BASE_US0 || port->mapbase == AT91RM9200_BASE_US3))
++              if (!(status & ATMEL_US_DCD))
++                      ret |= TIOCM_CD;
+       if (!(status & ATMEL_US_CTS))
+               ret |= TIOCM_CTS;
+       if (!(status & ATMEL_US_DSR))
+@@ -219,6 +253,16 @@
+       if (!(status & ATMEL_US_RI))
+               ret |= TIOCM_RI;
+ 
++      /*
++       * Read the GPIO's for the FDL VersaLink special case
++       */
++      if (port->mapbase == AT91RM9200_BASE_US0)
++              if (!(at91_get_gpio_value(AT91_PIN_PB6)))
++                      ret |= TIOCM_CD;
++      if (port->mapbase == AT91RM9200_BASE_US3)
++              if (!(at91_get_gpio_value(AT91_PIN_PB29)))
++                      ret |= TIOCM_CD;
++
+       return ret;
+ }
+