* Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
* Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
* Copyright 2008 Colin McCabe <colin@cozybit.com>
- * Copyright 2015 Intel Deutschland GmbH
+ * Copyright 2015-2017 Intel Deutschland GmbH
+ * Copyright (C) 2018-2021 Intel Corporation
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
#define NL80211_MULTICAST_GROUP_REG "regulatory"
#define NL80211_MULTICAST_GROUP_MLME "mlme"
#define NL80211_MULTICAST_GROUP_VENDOR "vendor"
+#define NL80211_MULTICAST_GROUP_NAN "nan"
#define NL80211_MULTICAST_GROUP_TESTMODE "testmode"
+#define NL80211_EDMG_BW_CONFIG_MIN 4
+#define NL80211_EDMG_BW_CONFIG_MAX 15
+#define NL80211_EDMG_CHANNELS_MIN 1
+#define NL80211_EDMG_CHANNELS_MAX 0x3c /* 0b00111100 */
+
/**
* DOC: Station handling
*
* Multiple such rules can be created.
*/
+/**
+ * DOC: WPA/WPA2 EAPOL handshake offload
+ *
+ * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK flag drivers
+ * can indicate they support offloading EAPOL handshakes for WPA/WPA2
+ * preshared key authentication in station mode. In %NL80211_CMD_CONNECT
+ * the preshared key should be specified using %NL80211_ATTR_PMK. Drivers
+ * supporting this offload may reject the %NL80211_CMD_CONNECT when no
+ * preshared key material is provided, for example when that driver does
+ * not support setting the temporal keys through %NL80211_CMD_NEW_KEY.
+ *
+ * Similarly @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X flag can be
+ * set by drivers indicating offload support of the PTK/GTK EAPOL
+ * handshakes during 802.1X authentication in station mode. In order to
+ * use the offload the %NL80211_CMD_CONNECT should have
+ * %NL80211_ATTR_WANT_1X_4WAY_HS attribute flag. Drivers supporting this
+ * offload may reject the %NL80211_CMD_CONNECT when the attribute flag is
+ * not present.
+ *
+ * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK flag drivers
+ * can indicate they support offloading EAPOL handshakes for WPA/WPA2
+ * preshared key authentication in AP mode. In %NL80211_CMD_START_AP
+ * the preshared key should be specified using %NL80211_ATTR_PMK. Drivers
+ * supporting this offload may reject the %NL80211_CMD_START_AP when no
+ * preshared key material is provided, for example when that driver does
+ * not support setting the temporal keys through %NL80211_CMD_NEW_KEY.
+ *
+ * For 802.1X the PMK or PMK-R0 are set by providing %NL80211_ATTR_PMK
+ * using %NL80211_CMD_SET_PMK. For offloaded FT support also
+ * %NL80211_ATTR_PMKR0_NAME must be provided.
+ */
+
+/**
+ * DOC: FILS shared key authentication offload
+ *
+ * FILS shared key authentication offload can be advertized by drivers by
+ * setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support
+ * FILS shared key authentication offload should be able to construct the
+ * authentication and association frames for FILS shared key authentication and
+ * eventually do a key derivation as per IEEE 802.11ai. The below additional
+ * parameters should be given to driver in %NL80211_CMD_CONNECT and/or in
+ * %NL80211_CMD_UPDATE_CONNECT_PARAMS.
+ * %NL80211_ATTR_FILS_ERP_USERNAME - used to construct keyname_nai
+ * %NL80211_ATTR_FILS_ERP_REALM - used to construct keyname_nai
+ * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used to construct erp message
+ * %NL80211_ATTR_FILS_ERP_RRK - used to generate the rIK and rMSK
+ * rIK should be used to generate an authentication tag on the ERP message and
+ * rMSK should be used to derive a PMKSA.
+ * rIK, rMSK should be generated and keyname_nai, sequence number should be used
+ * as specified in IETF RFC 6696.
+ *
+ * When FILS shared key authentication is completed, driver needs to provide the
+ * below additional parameters to userspace, which can be either after setting
+ * up a connection or after roaming.
+ * %NL80211_ATTR_FILS_KEK - used for key renewal
+ * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used in further EAP-RP exchanges
+ * %NL80211_ATTR_PMKID - used to identify the PMKSA used/generated
+ * %Nl80211_ATTR_PMK - used to update PMKSA cache in userspace
+ * The PMKSA can be maintained in userspace persistently so that it can be used
+ * later after reboots or wifi turn off/on also.
+ *
+ * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertized by a FILS
+ * capable AP supporting PMK caching. It specifies the scope within which the
+ * PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and
+ * %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based
+ * on FILS cache identifier. Additionally %NL80211_ATTR_PMK is used with
+ * %NL80211_SET_PMKSA to specify the PMK corresponding to a PMKSA for driver to
+ * use in a FILS shared key connection with PMKSA caching.
+ */
+
+/**
+ * DOC: SAE authentication offload
+ *
+ * By setting @NL80211_EXT_FEATURE_SAE_OFFLOAD flag drivers can indicate they
+ * support offloading SAE authentication for WPA3-Personal networks in station
+ * mode. Similarly @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP flag can be set by
+ * drivers indicating the offload support in AP mode.
+ *
+ * The password for SAE should be specified using %NL80211_ATTR_SAE_PASSWORD in
+ * %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP for station and AP mode
+ * respectively.
+ */
+
+/**
+ * DOC: VLAN offload support for setting group keys and binding STAs to VLANs
+ *
+ * By setting @NL80211_EXT_FEATURE_VLAN_OFFLOAD flag drivers can indicate they
+ * support offloading VLAN functionality in a manner where the driver exposes a
+ * single netdev that uses VLAN tagged frames and separate VLAN-specific netdevs
+ * can then be added using RTM_NEWLINK/IFLA_VLAN_ID similarly to the Ethernet
+ * case. Frames received from stations that are not assigned to any VLAN are
+ * delivered on the main netdev and frames to such stations can be sent through
+ * that main netdev.
+ *
+ * %NL80211_CMD_NEW_KEY (for group keys), %NL80211_CMD_NEW_STATION, and
+ * %NL80211_CMD_SET_STATION will optionally specify vlan_id using
+ * %NL80211_ATTR_VLAN_ID.
+ */
+
+/**
+ * DOC: TID configuration
+ *
+ * TID config support can be checked in the %NL80211_ATTR_TID_CONFIG
+ * attribute given in wiphy capabilities.
+ *
+ * The necessary configuration parameters are mentioned in
+ * &enum nl80211_tid_config_attr and it will be passed to the
+ * %NL80211_CMD_SET_TID_CONFIG command in %NL80211_ATTR_TID_CONFIG.
+ *
+ * If the configuration needs to be applied for specific peer then the MAC
+ * address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the
+ * configuration will be applied for all the connected peers in the vif except
+ * any peers that have peer specific configuration for the TID by default; if
+ * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer specific values
+ * will be overwritten.
+ *
+ * All this configuration is valid only for STA's current connection
+ * i.e. the configuration will be reset to default when the STA connects back
+ * after disconnection/roaming, and this configuration will be cleared when
+ * the interface goes down.
+ */
+
/**
* enum nl80211_commands - supported nl80211 commands
*
* to get a list of all present wiphys.
* @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
* %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
- * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ (and the
- * attributes determining the channel width; this is used for setting
- * monitor mode channel), %NL80211_ATTR_WIPHY_RETRY_SHORT,
- * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
- * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD.
- * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL
- * instead, the support here is for backward compatibility only.
+ * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ,
+ * %NL80211_ATTR_WIPHY_FREQ_OFFSET (and the attributes determining the
+ * channel width; this is used for setting monitor mode channel),
+ * %NL80211_ATTR_WIPHY_RETRY_SHORT, %NL80211_ATTR_WIPHY_RETRY_LONG,
+ * %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, and/or
+ * %NL80211_ATTR_WIPHY_RTS_THRESHOLD. However, for setting the channel,
+ * see %NL80211_CMD_SET_CHANNEL instead, the support here is for backward
+ * compatibility only.
* @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
* or rename notification. Has attributes %NL80211_ATTR_WIPHY and
* %NL80211_ATTR_WIPHY_NAME.
* %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT,
* %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS.
* The channel to use can be set on the interface or be given using the
- * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width.
+ * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_FREQ_OFFSET, and the
+ * attributes determining channel width.
* @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP
* @NL80211_CMD_STOP_AP: Stop AP operation on the given interface
* @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP
* @NL80211_CMD_SET_STATION: Set station attributes for station identified by
* %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
* @NL80211_CMD_NEW_STATION: Add a station with given attributes to the
- * the interface identified by %NL80211_ATTR_IFINDEX.
+ * interface identified by %NL80211_ATTR_IFINDEX.
* @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC
* or, if no MAC address given, all stations, on the interface identified
* by %NL80211_ATTR_IFINDEX. %NL80211_ATTR_MGMT_SUBTYPE and
* @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
* %NL80211_ATTR_MAC.
* @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
- * the interface identified by %NL80211_ATTR_IFINDEX.
+ * interface identified by %NL80211_ATTR_IFINDEX.
* @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
* or, if no MAC address given, all mesh paths, on the interface identified
* by %NL80211_ATTR_IFINDEX.
* @NL80211_CMD_GET_SCAN: get scan results
* @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
* %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
- * probe requests at CCK rate or not.
+ * probe requests at CCK rate or not. %NL80211_ATTR_BSSID can be used to
+ * specify a BSSID to scan for; if not included, the wildcard BSSID will
+ * be used.
* @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
* NL80211_CMD_GET_SCAN and on the "scan" multicast group)
* @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
* are used. Extra IEs can also be passed from the userspace by
* using the %NL80211_ATTR_IE attribute. The first cycle of the
* scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY
- * is supplied.
+ * is supplied. If the device supports multiple concurrent scheduled
+ * scans, it will allow such when the caller provides the flag attribute
+ * %NL80211_ATTR_SCHED_SCAN_MULTI to indicate user-space support for it.
* @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
* scheduled scan is not running. The caller may assume that as soon
* as the call returns, it is safe to start a new scheduled scan again.
* @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
* NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
*
- * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry, using %NL80211_ATTR_MAC
- * (for the BSSID) and %NL80211_ATTR_PMKID.
+ * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry using %NL80211_ATTR_MAC
+ * (for the BSSID), %NL80211_ATTR_PMKID, and optionally %NL80211_ATTR_PMK
+ * (PMK is used for PTKSA derivation in case of FILS shared key offload) or
+ * using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID,
+ * %NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS
+ * authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier
+ * advertized by a FILS capable AP identifying the scope of PMKSA in an
+ * ESS.
* @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC
- * (for the BSSID) and %NL80211_ATTR_PMKID.
+ * (for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID,
+ * %NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS
+ * authentication.
* @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.
*
* @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
* interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and
* BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
* the SSID (mainly for association, but is included in authentication
- * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used
- * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE
- * is used to specify the authentication type. %NL80211_ATTR_IE is used to
- * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs)
- * to be added to the frame.
+ * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ +
+ * %NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the
+ * channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the
+ * authentication type. %NL80211_ATTR_IE is used to define IEs
+ * (VendorSpecificInfo, but also including RSN IE and FT IEs) to be added
+ * to the frame.
* When used as an event, this reports reception of an Authentication
* frame in station and IBSS modes when the local MLME processed the
* frame, i.e., it was for the local STA and was received in correct
* @NL80211_CMD_ASSOCIATE: association request and notification; like
* NL80211_CMD_AUTHENTICATE but for Association and Reassociation
* (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request,
- * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives).
+ * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). The
+ * %NL80211_ATTR_PREV_BSSID attribute is used to specify whether the
+ * request is for the initial association to an ESS (that attribute not
+ * included) or for reassociation within the ESS (that attribute is
+ * included).
* @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like
* NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to
* MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication
* requests to connect to a specified network but without separating
* auth and assoc steps. For this, you need to specify the SSID in a
* %NL80211_ATTR_SSID attribute, and can optionally specify the association
- * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP,
- * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
+ * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE,
+ * %NL80211_ATTR_USE_MFP, %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ,
+ * %NL80211_ATTR_WIPHY_FREQ_OFFSET, %NL80211_ATTR_CONTROL_PORT,
* %NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
- * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, %NL80211_ATTR_MAC_HINT, and
+ * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
+ * %NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and
* %NL80211_ATTR_WIPHY_FREQ_HINT.
* If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are
* restrictions on BSS selection, i.e., they effectively prevent roaming
* set of BSSID,frequency parameters is used (i.e., either the enforcing
* %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict
* %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT).
+ * Driver shall not modify the IEs specified through %NL80211_ATTR_IE if
+ * %NL80211_ATTR_MAC is included. However, if %NL80211_ATTR_MAC_HINT is
+ * included, these IEs through %NL80211_ATTR_IE are specified by the user
+ * space based on the best possible BSS selected. Thus, if the driver ends
+ * up selecting a different BSS, it can modify these IEs accordingly (e.g.
+ * userspace asks the driver to perform PMKSA caching with BSS1 and the
+ * driver ends up selecting BSS2 with different PMKSA cache entry; RSNIE
+ * has to get updated with the apt PMKID).
+ * %NL80211_ATTR_PREV_BSSID can be used to request a reassociation within
+ * the ESS in case the device is already associated and an association with
+ * a different BSS is desired.
* Background scan period can optionally be
* specified in %NL80211_ATTR_BG_SCAN_PERIOD,
* if not specified default background scan configuration
* This attribute is ignored if driver does not support roam scan.
* It is also sent as an event, with the BSSID and response IEs when the
* connection is established or failed to be established. This can be
- * determined by the STATUS_CODE attribute.
- * @NL80211_CMD_ROAM: request that the card roam (currently not implemented),
- * sent as an event when the card/driver roamed by itself.
+ * determined by the %NL80211_ATTR_STATUS_CODE attribute (0 = success,
+ * non-zero = failure). If %NL80211_ATTR_TIMED_OUT is included in the
+ * event, the connection attempt failed due to not being able to initiate
+ * authentication/association or not receiving a response from the AP.
+ * Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as
+ * well to remain backwards compatible.
+ * @NL80211_CMD_ROAM: Notification indicating the card/driver roamed by itself.
+ * When a security association was established on an 802.1X network using
+ * fast transition, this event should be followed by an
+ * %NL80211_CMD_PORT_AUTHORIZED event.
+ * Following a %NL80211_CMD_ROAM event userspace can issue
+ * %NL80211_CMD_GET_SCAN in order to obtain the scan information for the
+ * new BSS the card/driver roamed to.
* @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
* userspace that a connection was dropped by the AP or due to other
* reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
* four bytes for vendor frames including the OUI. The registration
* cannot be dropped, but is removed automatically when the netlink
* socket is closed. Multiple registrations can be made.
+ * The %NL80211_ATTR_RECEIVE_MULTICAST flag attribute can be given if
+ * %NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS is available, in which
+ * case the registration can also be modified to include/exclude the
+ * flag, rather than requiring unregistration to change it.
* @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for
* backward compatibility
* @NL80211_CMD_FRAME: Management frame TX request and RX notification. This
* is used during CSA period.
* @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this
* command may be used with the corresponding cookie to cancel the wait
- * time if it is known that it is no longer necessary.
+ * time if it is known that it is no longer necessary. This command is
+ * also sent as an event whenever the driver has completed the off-channel
+ * wait time.
* @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility.
* @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame
* transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies
* of any other interfaces, and other interfaces will again take
* precedence when they are used.
*
- * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
+ * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface
+ * (no longer supported).
+ *
+ * @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform
+ * multicast to unicast conversion. When enabled, all multicast packets
+ * with ethertype ARP, IPv4 or IPv6 (possibly within an 802.1Q header)
+ * will be sent out to each station once with the destination (multicast)
+ * MAC address replaced by the station's MAC address. Note that this may
+ * break certain expectations of the receiver, e.g. the ability to drop
+ * unicast IP packets encapsulated in multicast L2 frames, or the ability
+ * to not send destination unreachable messages in such cases.
+ * This can only be toggled per BSS. Configure this on an interface of
+ * type %NL80211_IFTYPE_AP. It applies to all its VLAN interfaces
+ * (%NL80211_IFTYPE_AP_VLAN), except for those in 4addr (WDS) mode.
+ * If %NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED is not present with this
+ * command, the feature is disabled.
*
* @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial
* mesh config parameters may be given.
* various triggers. These triggers can be configured through this
* command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
* more background information, see
- * http://wireless.kernel.org/en/users/Documentation/WoWLAN.
+ * https://wireless.wiki.kernel.org/en/users/Documentation/WoWLAN.
* The @NL80211_CMD_SET_WOWLAN command can also be used as a notification
* from the driver reporting the wakeup reason. In this case, the
* @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason
* @NL80211_CMD_SET_COALESCE: Configure coalesce rules or clear existing rules.
*
* @NL80211_CMD_CHANNEL_SWITCH: Perform a channel switch by announcing the
- * the new channel information (Channel Switch Announcement - CSA)
+ * new channel information (Channel Switch Announcement - CSA)
* in the beacon for some time (as defined in the
* %NL80211_ATTR_CH_SWITCH_COUNT parameter) and then change to the
* new channel. Userspace provides the new channel information (using
* not running. The driver indicates the status of the scan through
* cfg80211_scan_done().
*
+ * @NL80211_CMD_START_NAN: Start NAN operation, identified by its
+ * %NL80211_ATTR_WDEV interface. This interface must have been
+ * previously created with %NL80211_CMD_NEW_INTERFACE. After it
+ * has been started, the NAN interface will create or join a
+ * cluster. This command must have a valid
+ * %NL80211_ATTR_NAN_MASTER_PREF attribute and optional
+ * %NL80211_ATTR_BANDS attributes. If %NL80211_ATTR_BANDS is
+ * omitted or set to 0, it means don't-care and the device will
+ * decide what to use. After this command NAN functions can be
+ * added.
+ * @NL80211_CMD_STOP_NAN: Stop the NAN operation, identified by
+ * its %NL80211_ATTR_WDEV interface.
+ * @NL80211_CMD_ADD_NAN_FUNCTION: Add a NAN function. The function is defined
+ * with %NL80211_ATTR_NAN_FUNC nested attribute. When called, this
+ * operation returns the strictly positive and unique instance id
+ * (%NL80211_ATTR_NAN_FUNC_INST_ID) and a cookie (%NL80211_ATTR_COOKIE)
+ * of the function upon success.
+ * Since instance ID's can be re-used, this cookie is the right
+ * way to identify the function. This will avoid races when a termination
+ * event is handled by the user space after it has already added a new
+ * function that got the same instance id from the kernel as the one
+ * which just terminated.
+ * This cookie may be used in NAN events even before the command
+ * returns, so userspace shouldn't process NAN events until it processes
+ * the response to this command.
+ * Look at %NL80211_ATTR_SOCKET_OWNER as well.
+ * @NL80211_CMD_DEL_NAN_FUNCTION: Delete a NAN function by cookie.
+ * This command is also used as a notification sent when a NAN function is
+ * terminated. This will contain a %NL80211_ATTR_NAN_FUNC_INST_ID
+ * and %NL80211_ATTR_COOKIE attributes.
+ * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN
+ * configuration. NAN must be operational (%NL80211_CMD_START_NAN
+ * was executed). It must contain at least one of the following
+ * attributes: %NL80211_ATTR_NAN_MASTER_PREF,
+ * %NL80211_ATTR_BANDS. If %NL80211_ATTR_BANDS is omitted, the
+ * current configuration is not changed. If it is present but
+ * set to zero, the configuration is changed to don't-care
+ * (i.e. the device can decide what to do).
+ * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported.
+ * This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and
+ * %NL80211_ATTR_COOKIE.
+ *
+ * @NL80211_CMD_UPDATE_CONNECT_PARAMS: Update one or more connect parameters
+ * for subsequent roaming cases if the driver or firmware uses internal
+ * BSS selection. This command can be issued only while connected and it
+ * does not result in a change for the current association. Currently,
+ * only the %NL80211_ATTR_IE data is used and updated with this command.
+ *
+ * @NL80211_CMD_SET_PMK: For offloaded 4-Way handshake, set the PMK or PMK-R0
+ * for the given authenticator address (specified with %NL80211_ATTR_MAC).
+ * When %NL80211_ATTR_PMKR0_NAME is set, %NL80211_ATTR_PMK specifies the
+ * PMK-R0, otherwise it specifies the PMK.
+ * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously
+ * configured PMK for the authenticator address identified by
+ * %NL80211_ATTR_MAC.
+ * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates an 802.1X FT roam was
+ * completed successfully. Drivers that support 4 way handshake offload
+ * should send this event after indicating 802.1X FT assocation with
+ * %NL80211_CMD_ROAM. If the 4 way handshake failed %NL80211_CMD_DISCONNECT
+ * should be indicated instead.
+ * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request
+ * and RX notification. This command is used both as a request to transmit
+ * a control port frame and as a notification that a control port frame
+ * has been received. %NL80211_ATTR_FRAME is used to specify the
+ * frame contents. The frame is the raw EAPoL data, without ethernet or
+ * 802.11 headers.
+ * When used as an event indication %NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
+ * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT and %NL80211_ATTR_MAC are added
+ * indicating the protocol type of the received frame; whether the frame
+ * was received unencrypted and the MAC address of the peer respectively.
+ *
+ * @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded.
+ *
+ * @NL80211_CMD_EXTERNAL_AUTH: This interface is exclusively defined for host
+ * drivers that do not define separate commands for authentication and
+ * association, but rely on user space for the authentication to happen.
+ * This interface acts both as the event request (driver to user space)
+ * to trigger the authentication and command response (userspace to
+ * driver) to indicate the authentication status.
+ *
+ * User space uses the %NL80211_CMD_CONNECT command to the host driver to
+ * trigger a connection. The host driver selects a BSS and further uses
+ * this interface to offload only the authentication part to the user
+ * space. Authentication frames are passed between the driver and user
+ * space through the %NL80211_CMD_FRAME interface. Host driver proceeds
+ * further with the association after getting successful authentication
+ * status. User space indicates the authentication status through
+ * %NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH
+ * command interface.
+ *
+ * Host driver reports this status on an authentication failure to the
+ * user space through the connect result as the user space would have
+ * initiated the connection through the connect request.
+ *
+ * @NL80211_CMD_STA_OPMODE_CHANGED: An event that notify station's
+ * ht opmode or vht opmode changes using any of %NL80211_ATTR_SMPS_MODE,
+ * %NL80211_ATTR_CHANNEL_WIDTH,%NL80211_ATTR_NSS attributes with its
+ * address(specified in %NL80211_ATTR_MAC).
+ *
+ * @NL80211_CMD_GET_FTM_RESPONDER_STATS: Retrieve FTM responder statistics, in
+ * the %NL80211_ATTR_FTM_RESPONDER_STATS attribute.
+ *
+ * @NL80211_CMD_PEER_MEASUREMENT_START: start a (set of) peer measurement(s)
+ * with the given parameters, which are encapsulated in the nested
+ * %NL80211_ATTR_PEER_MEASUREMENTS attribute. Optionally, MAC address
+ * randomization may be enabled and configured by specifying the
+ * %NL80211_ATTR_MAC and %NL80211_ATTR_MAC_MASK attributes.
+ * If a timeout is requested, use the %NL80211_ATTR_TIMEOUT attribute.
+ * A u64 cookie for further %NL80211_ATTR_COOKIE use is returned in
+ * the netlink extended ack message.
+ *
+ * To cancel a measurement, close the socket that requested it.
+ *
+ * Measurement results are reported to the socket that requested the
+ * measurement using @NL80211_CMD_PEER_MEASUREMENT_RESULT when they
+ * become available, so applications must ensure a large enough socket
+ * buffer size.
+ *
+ * Depending on driver support it may or may not be possible to start
+ * multiple concurrent measurements.
+ * @NL80211_CMD_PEER_MEASUREMENT_RESULT: This command number is used for the
+ * result notification from the driver to the requesting socket.
+ * @NL80211_CMD_PEER_MEASUREMENT_COMPLETE: Notification only, indicating that
+ * the measurement completed, using the measurement cookie
+ * (%NL80211_ATTR_COOKIE).
+ *
+ * @NL80211_CMD_NOTIFY_RADAR: Notify the kernel that a radar signal was
+ * detected and reported by a neighboring device on the channel
+ * indicated by %NL80211_ATTR_WIPHY_FREQ and other attributes
+ * determining the width and type.
+ *
+ * @NL80211_CMD_UPDATE_OWE_INFO: This interface allows the host driver to
+ * offload OWE processing to user space. This intends to support
+ * OWE AKM by the host drivers that implement SME but rely
+ * on the user space for the cryptographic/DH IE processing in AP mode.
+ *
+ * @NL80211_CMD_PROBE_MESH_LINK: The requirement for mesh link metric
+ * refreshing, is that from one mesh point we be able to send some data
+ * frames to other mesh points which are not currently selected as a
+ * primary traffic path, but which are only 1 hop away. The absence of
+ * the primary path to the chosen node makes it necessary to apply some
+ * form of marking on a chosen packet stream so that the packets can be
+ * properly steered to the selected node for testing, and not by the
+ * regular mesh path lookup. Further, the packets must be of type data
+ * so that the rate control (often embedded in firmware) is used for
+ * rate selection.
+ *
+ * Here attribute %NL80211_ATTR_MAC is used to specify connected mesh
+ * peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame
+ * content. The frame is ethernet data.
+ *
+ * @NL80211_CMD_SET_TID_CONFIG: Data frame TID specific configuration
+ * is passed using %NL80211_ATTR_TID_CONFIG attribute.
+ *
+ * @NL80211_CMD_UNPROT_BEACON: Unprotected or incorrectly protected Beacon
+ * frame. This event is used to indicate that a received Beacon frame was
+ * dropped because it did not include a valid MME MIC while beacon
+ * protection was enabled (BIGTK configured in station mode).
+ *
+ * @NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS: Report TX status of a control
+ * port frame transmitted with %NL80211_CMD_CONTROL_PORT_FRAME.
+ * %NL80211_ATTR_COOKIE identifies the TX command and %NL80211_ATTR_FRAME
+ * includes the contents of the frame. %NL80211_ATTR_ACK flag is included
+ * if the recipient acknowledged the frame.
+ *
+ * @NL80211_CMD_SET_SAR_SPECS: SAR power limitation configuration is
+ * passed using %NL80211_ATTR_SAR_SPEC. %NL80211_ATTR_WIPHY is used to
+ * specify the wiphy index to be applied to.
+ *
+ * @NL80211_CMD_OBSS_COLOR_COLLISION: This notification is sent out whenever
+ * mac80211/drv detects a bss color collision.
+ *
+ * @NL80211_CMD_COLOR_CHANGE_REQUEST: This command is used to indicate that
+ * userspace wants to change the BSS color.
+ *
+ * @NL80211_CMD_COLOR_CHANGE_STARTED: Notify userland, that a color change has
+ * started
+ *
+ * @NL80211_CMD_COLOR_CHANGE_ABORTED: Notify userland, that the color change has
+ * been aborted
+ *
+ * @NL80211_CMD_COLOR_CHANGE_COMPLETED: Notify userland that the color change
+ * has completed
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
NL80211_CMD_ABORT_SCAN,
+ NL80211_CMD_START_NAN,
+ NL80211_CMD_STOP_NAN,
+ NL80211_CMD_ADD_NAN_FUNCTION,
+ NL80211_CMD_DEL_NAN_FUNCTION,
+ NL80211_CMD_CHANGE_NAN_CONFIG,
+ NL80211_CMD_NAN_MATCH,
+
+ NL80211_CMD_SET_MULTICAST_TO_UNICAST,
+
+ NL80211_CMD_UPDATE_CONNECT_PARAMS,
+
+ NL80211_CMD_SET_PMK,
+ NL80211_CMD_DEL_PMK,
+
+ NL80211_CMD_PORT_AUTHORIZED,
+
+ NL80211_CMD_RELOAD_REGDB,
+
+ NL80211_CMD_EXTERNAL_AUTH,
+
+ NL80211_CMD_STA_OPMODE_CHANGED,
+
+ NL80211_CMD_CONTROL_PORT_FRAME,
+
+ NL80211_CMD_GET_FTM_RESPONDER_STATS,
+
+ NL80211_CMD_PEER_MEASUREMENT_START,
+ NL80211_CMD_PEER_MEASUREMENT_RESULT,
+ NL80211_CMD_PEER_MEASUREMENT_COMPLETE,
+
+ NL80211_CMD_NOTIFY_RADAR,
+
+ NL80211_CMD_UPDATE_OWE_INFO,
+
+ NL80211_CMD_PROBE_MESH_LINK,
+
+ NL80211_CMD_SET_TID_CONFIG,
+
+ NL80211_CMD_UNPROT_BEACON,
+
+ NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS,
+
+ NL80211_CMD_SET_SAR_SPECS,
+
+ NL80211_CMD_OBSS_COLOR_COLLISION,
+
+ NL80211_CMD_COLOR_CHANGE_REQUEST,
+
+ NL80211_CMD_COLOR_CHANGE_STARTED,
+ NL80211_CMD_COLOR_CHANGE_ABORTED,
+ NL80211_CMD_COLOR_CHANGE_COMPLETED,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
* of &enum nl80211_chan_width, describing the channel width. See the
* documentation of the enum for more information.
* @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the
- * channel, used for anything but 20 MHz bandwidth
+ * channel, used for anything but 20 MHz bandwidth. In S1G this is the
+ * operating channel center frequency.
* @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the
* channel, used only for 80+80 MHz bandwidth
* @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
* rates as defined by IEEE 802.11 7.3.2.2 but without the length
* restriction (at most %NL80211_MAX_SUPP_RATES).
* @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station
- * to, or the AP interface the station was originally added to to.
+ * to, or the AP interface the station was originally added to.
* @NL80211_ATTR_STA_INFO: information about a station, part of station info
* given for %NL80211_CMD_GET_STATION, nested attribute containing
* info as possible, see &enum nl80211_sta_info.
*
* @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is
* used for the association (&enum nl80211_mfp, represented as a u32);
- * this attribute can be used
- * with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests
+ * this attribute can be used with %NL80211_CMD_ASSOCIATE and
+ * %NL80211_CMD_CONNECT requests. %NL80211_MFP_OPTIONAL is not allowed for
+ * %NL80211_CMD_ASSOCIATE since user space SME is expected and hence, it
+ * must have decided whether to use management frame protection or not.
+ * Setting %NL80211_MFP_OPTIONAL with a %NL80211_CMD_CONNECT request will
+ * let the driver (or the firmware) decide whether to use MFP or not.
*
* @NL80211_ATTR_STA_FLAGS2: Attribute containing a
* &struct nl80211_sta_flag_update.
* @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with
* %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom
* ethertype frames used for key negotiation must not be encrypted.
+ * @NL80211_ATTR_CONTROL_PORT_OVER_NL80211: A flag indicating whether control
+ * port frames (e.g. of type given in %NL80211_ATTR_CONTROL_PORT_ETHERTYPE)
+ * will be sent directly to the network interface or sent via the NL80211
+ * socket. If this attribute is missing, then legacy behavior of sending
+ * control port frames directly to the network interface is used. If the
+ * flag is included, then control port frames are sent over NL80211 instead
+ * using %CMD_CONTROL_PORT_FRAME. If control port routing over NL80211 is
+ * to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER
+ * flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth
+ * frames are not forwared over the control port.
*
* @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
* We recommend using nested, driver-specific attributes within this.
* (a u32 with flags from &enum nl80211_wpa_versions).
* @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
* indicate which key management algorithm(s) to use (an array of u32).
+ * This attribute is also sent in response to @NL80211_CMD_GET_WIPHY,
+ * indicating the supported AKM suites, intended for specific drivers which
+ * implement SME and have constraints on which AKMs are supported and also
+ * the cases where an AKM support is offloaded to the driver/firmware.
+ * If there is no such notification from the driver, user space should
+ * assume the driver supports all the AKM suites.
*
* @NL80211_ATTR_REQ_IE: (Re)association request information elements as
* sent out by the card, for ROAM and successful CONNECT events.
* @NL80211_ATTR_RESP_IE: (Re)association response information elements as
* sent by peer, for ROAM and successful CONNECT events.
*
- * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE
- * commands to specify using a reassociate frame
+ * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used in ASSOCIATE and CONNECT
+ * commands to specify a request to reassociate within an ESS, i.e., to use
+ * Reassociate Request frame (with the value of this attribute in the
+ * Current AP address field) instead of Association Request frame which is
+ * used for the initial association to an ESS.
*
* @NL80211_ATTR_KEY: key information in a nested attribute with
* %NL80211_KEY_* sub-attributes
* enum nl80211_band value is used as the index (nla_type() of the nested
* data. If a band is not included, it will be configured to allow all
* rates based on negotiated supported rates information. This attribute
- * is used with %NL80211_CMD_SET_TX_BITRATE_MASK.
+ * is used with %NL80211_CMD_SET_TX_BITRATE_MASK and with starting AP,
+ * and joining mesh networks (not IBSS yet). In the later case, it must
+ * specify just a single bitrate, which is to be used for the beacon.
+ * The driver must also specify support for this with the extended
+ * features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
+ * NL80211_EXT_FEATURE_BEACON_RATE_HT,
+ * NL80211_EXT_FEATURE_BEACON_RATE_VHT and
+ * NL80211_EXT_FEATURE_BEACON_RATE_HE.
*
* @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
* at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
* the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID
* is included in the probe request, but the match attributes
* will never let it go through), -EINVAL may be returned.
- * If ommited, no filtering is done.
+ * If omitted, no filtering is done.
*
* @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
* interface combinations. In each nested item, it contains attributes
* @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire
* probe-response frame. The DA field in the 802.11 header is zero-ed out,
* to be filled by the FW.
- * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable
- * this feature. Currently, only supported in mac80211 drivers.
+ * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable
+ * this feature during association. This is a flag attribute.
+ * Currently only supported in mac80211 drivers.
+ * @NL80211_ATTR_DISABLE_VHT: Force VHT capable interfaces to disable
+ * this feature during association. This is a flag attribute.
+ * Currently only supported in mac80211 drivers.
+ * @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable
+ * this feature during association. This is a flag attribute.
+ * Currently only supported in mac80211 drivers.
* @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
* ATTR_HT_CAPABILITY to which attention should be paid.
* Currently, only mac80211 NICs support this feature.
*
* @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be
* used by the drivers which has MLME in firmware and does not have support
- * to report per station tx/rx activity to free up the staion entry from
+ * to report per station tx/rx activity to free up the station entry from
* the list. This needs to be used when the driver advertises the
* capability to timeout the stations.
*
* the connection request from a station. nl80211_connect_failed_reason
* enum has different reasons of connection failure.
*
- * @NL80211_ATTR_SAE_DATA: SAE elements in Authentication frames. This starts
- * with the Authentication transaction sequence number field.
+ * @NL80211_ATTR_AUTH_DATA: Fields and elements in Authentication frames.
+ * This contains the authentication frame body (non-IE and IE data),
+ * excluding the Authentication algorithm number, i.e., starting at the
+ * Authentication transaction sequence number field. It is used with
+ * authentication algorithms that need special fields to be added into
+ * the frames (SAE and FILS). Currently, only the SAE cases use the
+ * initial two fields (Authentication transaction sequence number and
+ * Status code). However, those fields are included in the attribute data
+ * for all authentication algorithms to keep the attribute definition
+ * consistent.
*
* @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from
* association request when used with NL80211_CMD_NEW_STATION)
* until the channel switch event.
* @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission
* must be blocked on the current channel (before the channel switch
- * operation).
+ * operation). Also included in the channel switch started event if quiet
+ * was requested by the AP.
* @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information
* for the time while performing a channel switch.
- * @NL80211_ATTR_CSA_C_OFF_BEACON: An array of offsets (u16) to the channel
- * switch counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL).
- * @NL80211_ATTR_CSA_C_OFF_PRESP: An array of offsets (u16) to the channel
- * switch counters in the probe response (%NL80211_ATTR_PROBE_RESP).
+ * @NL80211_ATTR_CNTDWN_OFFS_BEACON: An array of offsets (u16) to the channel
+ * switch or color change counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL).
+ * @NL80211_ATTR_CNTDWN_OFFS_PRESP: An array of offsets (u16) to the channel
+ * switch or color change counters in the probe response (%NL80211_ATTR_PROBE_RESP).
*
* @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32.
* As specified in the &enum nl80211_rxmgmt_flags.
* @NL80211_ATTR_STA_SUPPORTED_CHANNELS: array of supported channels.
*
* @NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES: array of supported
- * supported operating classes.
+ * operating classes.
*
* @NL80211_ATTR_HANDLE_DFS: A flag indicating whether user space
* controls DFS operation in IBSS mode. If the flag is included in
*
* @NL80211_ATTR_OPMODE_NOTIF: Operating mode field from Operating Mode
* Notification Element based on association request when used with
- * %NL80211_CMD_NEW_STATION; u8 attribute.
+ * %NL80211_CMD_NEW_STATION or %NL80211_CMD_SET_STATION (only when
+ * %NL80211_FEATURE_FULL_AP_CLIENT_STATE is supported, or with TDLS);
+ * u8 attribute.
*
* @NL80211_ATTR_VENDOR_ID: The vendor ID, either a 24-bit OUI or, if
* %NL80211_VENDOR_ID_IS_LINUX is set, a special Linux ID (not used yet)
* regulatory indoor configuration would be owned by the netlink socket
* that configured the indoor setting, and the indoor operation would be
* cleared when the socket is closed.
+ * If set during NAN interface creation, the interface will be destroyed
+ * if the socket is closed just like any other interface. Moreover, NAN
+ * notifications will be sent in unicast to that socket. Without this
+ * attribute, the notifications will be sent to the %NL80211_MCGRP_NAN
+ * multicast group.
+ * If set during %NL80211_CMD_ASSOCIATE or %NL80211_CMD_CONNECT the
+ * station will deauthenticate when the socket is closed.
+ * If set during %NL80211_CMD_JOIN_IBSS the IBSS will be automatically
+ * torn down when the socket is closed.
+ * If set during %NL80211_CMD_JOIN_MESH the mesh setup will be
+ * automatically torn down when the socket is closed.
+ * If set during %NL80211_CMD_START_AP the AP will be automatically
+ * disabled when the socket is closed.
*
* @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
* the TDLS link initiator.
* underlying device supports these minimal RRM features:
* %NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES,
* %NL80211_FEATURE_QUIET,
+ * Or, if global RRM is supported, see:
+ * %NL80211_EXT_FEATURE_RRM
* If this flag is used, driver must add the Power Capabilities IE to the
* association request. In addition, it must also set the RRM capability
* flag in the association request's Capability Info field.
* thus it must not specify the number of iterations, only the interval
* between scans. The scan plans are executed sequentially.
* Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan.
+ * @NL80211_ATTR_PBSS: flag attribute. If set it means operate
+ * in a PBSS. Specified in %NL80211_CMD_CONNECT to request
+ * connecting to a PCP, and in %NL80211_CMD_START_AP to start
+ * a PCP instead of AP. Relevant for DMG networks only.
+ * @NL80211_ATTR_BSS_SELECT: nested attribute for driver supporting the
+ * BSS selection feature. When used with %NL80211_CMD_GET_WIPHY it contains
+ * attributes according &enum nl80211_bss_select_attr to indicate what
+ * BSS selection behaviours are supported. When used with %NL80211_CMD_CONNECT
+ * it contains the behaviour-specific attribute containing the parameters for
+ * BSS selection to be done by driver and/or firmware.
+ *
+ * @NL80211_ATTR_STA_SUPPORT_P2P_PS: whether P2P PS mechanism supported
+ * or not. u8, one of the values of &enum nl80211_sta_p2p_ps_status
+ *
+ * @NL80211_ATTR_PAD: attribute used for padding for 64-bit alignment
+ *
+ * @NL80211_ATTR_IFTYPE_EXT_CAPA: Nested attribute of the following attributes:
+ * %NL80211_ATTR_IFTYPE, %NL80211_ATTR_EXT_CAPA,
+ * %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities per
+ * interface type.
+ *
+ * @NL80211_ATTR_MU_MIMO_GROUP_DATA: array of 24 bytes that defines a MU-MIMO
+ * groupID for monitor mode.
+ * The first 8 bytes are a mask that defines the membership in each
+ * group (there are 64 groups, group 0 and 63 are reserved),
+ * each bit represents a group and set to 1 for being a member in
+ * that group and 0 for not being a member.
+ * The remaining 16 bytes define the position in each group: 2 bits for
+ * each group.
+ * (smaller group numbers represented on most significant bits and bigger
+ * group numbers on least significant bits.)
+ * This attribute is used only if all interfaces are in monitor mode.
+ * Set this attribute in order to monitor packets using the given MU-MIMO
+ * groupID data.
+ * to turn off that feature set all the bits of the groupID to zero.
+ * @NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR: mac address for the sniffer to follow
+ * when using MU-MIMO air sniffer.
+ * to turn that feature off set an invalid mac address
+ * (e.g. FF:FF:FF:FF:FF:FF)
+ *
+ * @NL80211_ATTR_SCAN_START_TIME_TSF: The time at which the scan was actually
+ * started (u64). The time is the TSF of the BSS the interface that
+ * requested the scan is connected to (if available, otherwise this
+ * attribute must not be included).
+ * @NL80211_ATTR_SCAN_START_TIME_TSF_BSSID: The BSS according to which
+ * %NL80211_ATTR_SCAN_START_TIME_TSF is set.
+ * @NL80211_ATTR_MEASUREMENT_DURATION: measurement duration in TUs (u16). If
+ * %NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY is not set, this is the
+ * maximum measurement duration allowed. This attribute is used with
+ * measurement requests. It can also be used with %NL80211_CMD_TRIGGER_SCAN
+ * if the scan is used for beacon report radio measurement.
+ * @NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY: flag attribute that indicates
+ * that the duration specified with %NL80211_ATTR_MEASUREMENT_DURATION is
+ * mandatory. If this flag is not set, the duration is the maximum duration
+ * and the actual measurement duration may be shorter.
+ *
+ * @NL80211_ATTR_MESH_PEER_AID: Association ID for the mesh peer (u16). This is
+ * used to pull the stored data for mesh peer in power save state.
+ *
+ * @NL80211_ATTR_NAN_MASTER_PREF: the master preference to be used by
+ * %NL80211_CMD_START_NAN and optionally with
+ * %NL80211_CMD_CHANGE_NAN_CONFIG. Its type is u8 and it can't be 0.
+ * Also, values 1 and 255 are reserved for certification purposes and
+ * should not be used during a normal device operation.
+ * @NL80211_ATTR_BANDS: operating bands configuration. This is a u32
+ * bitmask of BIT(NL80211_BAND_*) as described in %enum
+ * nl80211_band. For instance, for NL80211_BAND_2GHZ, bit 0
+ * would be set. This attribute is used with
+ * %NL80211_CMD_START_NAN and %NL80211_CMD_CHANGE_NAN_CONFIG, and
+ * it is optional. If no bands are set, it means don't-care and
+ * the device will decide what to use.
+ * @NL80211_ATTR_NAN_FUNC: a function that can be added to NAN. See
+ * &enum nl80211_nan_func_attributes for description of this nested
+ * attribute.
+ * @NL80211_ATTR_NAN_MATCH: used to report a match. This is a nested attribute.
+ * See &enum nl80211_nan_match_attributes.
+ * @NL80211_ATTR_FILS_KEK: KEK for FILS (Re)Association Request/Response frame
+ * protection.
+ * @NL80211_ATTR_FILS_NONCES: Nonces (part of AAD) for FILS (Re)Association
+ * Request/Response frame protection. This attribute contains the 16 octet
+ * STA Nonce followed by 16 octets of AP Nonce.
+ *
+ * @NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED: Indicates whether or not multicast
+ * packets should be send out as unicast to all stations (flag attribute).
+ *
+ * @NL80211_ATTR_BSSID: The BSSID of the AP. Note that %NL80211_ATTR_MAC is also
+ * used in various commands/events for specifying the BSSID.
+ *
+ * @NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI: Relative RSSI threshold by which
+ * other BSSs has to be better or slightly worse than the current
+ * connected BSS so that they get reported to user space.
+ * This will give an opportunity to userspace to consider connecting to
+ * other matching BSSs which have better or slightly worse RSSI than
+ * the current connected BSS by using an offloaded operation to avoid
+ * unnecessary wakeups.
+ *
+ * @NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST: When present the RSSI level for BSSs in
+ * the specified band is to be adjusted before doing
+ * %NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI based comparison to figure out
+ * better BSSs. The attribute value is a packed structure
+ * value as specified by &struct nl80211_bss_select_rssi_adjust.
+ *
+ * @NL80211_ATTR_TIMEOUT_REASON: The reason for which an operation timed out.
+ * u32 attribute with an &enum nl80211_timeout_reason value. This is used,
+ * e.g., with %NL80211_CMD_CONNECT event.
+ *
+ * @NL80211_ATTR_FILS_ERP_USERNAME: EAP Re-authentication Protocol (ERP)
+ * username part of NAI used to refer keys rRK and rIK. This is used with
+ * %NL80211_CMD_CONNECT.
+ *
+ * @NL80211_ATTR_FILS_ERP_REALM: EAP Re-authentication Protocol (ERP) realm part
+ * of NAI specifying the domain name of the ER server. This is used with
+ * %NL80211_CMD_CONNECT.
+ *
+ * @NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM: Unsigned 16-bit ERP next sequence number
+ * to use in ERP messages. This is used in generating the FILS wrapped data
+ * for FILS authentication and is used with %NL80211_CMD_CONNECT.
+ *
+ * @NL80211_ATTR_FILS_ERP_RRK: ERP re-authentication Root Key (rRK) for the
+ * NAI specified by %NL80211_ATTR_FILS_ERP_USERNAME and
+ * %NL80211_ATTR_FILS_ERP_REALM. This is used for generating rIK and rMSK
+ * from successful FILS authentication and is used with
+ * %NL80211_CMD_CONNECT.
+ *
+ * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertized by a FILS AP
+ * identifying the scope of PMKSAs. This is used with
+ * @NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA.
+ *
+ * @NL80211_ATTR_PMK: attribute for passing PMK key material. Used with
+ * %NL80211_CMD_SET_PMKSA for the PMKSA identified by %NL80211_ATTR_PMKID.
+ * For %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP it is used to provide
+ * PSK for offloading 4-way handshake for WPA/WPA2-PSK networks. For 802.1X
+ * authentication it is used with %NL80211_CMD_SET_PMK. For offloaded FT
+ * support this attribute specifies the PMK-R0 if NL80211_ATTR_PMKR0_NAME
+ * is included as well.
+ *
+ * @NL80211_ATTR_SCHED_SCAN_MULTI: flag attribute which user-space shall use to
+ * indicate that it supports multiple active scheduled scan requests.
+ * @NL80211_ATTR_SCHED_SCAN_MAX_REQS: indicates maximum number of scheduled
+ * scan request that may be active for the device (u32).
+ *
+ * @NL80211_ATTR_WANT_1X_4WAY_HS: flag attribute which user-space can include
+ * in %NL80211_CMD_CONNECT to indicate that for 802.1X authentication it
+ * wants to use the supported offload of the 4-way handshake.
+ * @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT.
+ * @NL80211_ATTR_PORT_AUTHORIZED: (reserved)
+ *
+ * @NL80211_ATTR_EXTERNAL_AUTH_ACTION: Identify the requested external
+ * authentication operation (u32 attribute with an
+ * &enum nl80211_external_auth_action value). This is used with the
+ * %NL80211_CMD_EXTERNAL_AUTH request event.
+ * @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user
+ * space supports external authentication. This attribute shall be used
+ * with %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP request. The driver
+ * may offload authentication processing to user space if this capability
+ * is indicated in the respective requests from the user space.
+ *
+ * @NL80211_ATTR_NSS: Station's New/updated RX_NSS value notified using this
+ * u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED.
+ *
+ * @NL80211_ATTR_TXQ_STATS: TXQ statistics (nested attribute, see &enum
+ * nl80211_txq_stats)
+ * @NL80211_ATTR_TXQ_LIMIT: Total packet limit for the TXQ queues for this phy.
+ * The smaller of this and the memory limit is enforced.
+ * @NL80211_ATTR_TXQ_MEMORY_LIMIT: Total memory limit (in bytes) for the
+ * TXQ queues for this phy. The smaller of this and the packet limit is
+ * enforced.
+ * @NL80211_ATTR_TXQ_QUANTUM: TXQ scheduler quantum (bytes). Number of bytes
+ * a flow is assigned on each round of the DRR scheduler.
+ * @NL80211_ATTR_HE_CAPABILITY: HE Capability information element (from
+ * association request when used with NL80211_CMD_NEW_STATION). Can be set
+ * only if %NL80211_STA_FLAG_WME is set.
+ *
+ * @NL80211_ATTR_FTM_RESPONDER: nested attribute which user-space can include
+ * in %NL80211_CMD_START_AP or %NL80211_CMD_SET_BEACON for fine timing
+ * measurement (FTM) responder functionality and containing parameters as
+ * possible, see &enum nl80211_ftm_responder_attr
+ *
+ * @NL80211_ATTR_FTM_RESPONDER_STATS: Nested attribute with FTM responder
+ * statistics, see &enum nl80211_ftm_responder_stats.
+ *
+ * @NL80211_ATTR_TIMEOUT: Timeout for the given operation in milliseconds (u32),
+ * if the attribute is not given no timeout is requested. Note that 0 is an
+ * invalid value.
+ *
+ * @NL80211_ATTR_PEER_MEASUREMENTS: peer measurements request (and result)
+ * data, uses nested attributes specified in
+ * &enum nl80211_peer_measurement_attrs.
+ * This is also used for capability advertisement in the wiphy information,
+ * with the appropriate sub-attributes.
+ *
+ * @NL80211_ATTR_AIRTIME_WEIGHT: Station's weight when scheduled by the airtime
+ * scheduler.
+ *
+ * @NL80211_ATTR_STA_TX_POWER_SETTING: Transmit power setting type (u8) for
+ * station associated with the AP. See &enum nl80211_tx_power_setting for
+ * possible values.
+ * @NL80211_ATTR_STA_TX_POWER: Transmit power level (s16) in dBm units. This
+ * allows to set Tx power for a station. If this attribute is not included,
+ * the default per-interface tx power setting will be overriding. Driver
+ * should be picking up the lowest tx power, either tx power per-interface
+ * or per-station.
+ *
+ * @NL80211_ATTR_SAE_PASSWORD: attribute for passing SAE password material. It
+ * is used with %NL80211_CMD_CONNECT to provide password for offloading
+ * SAE authentication for WPA3-Personal networks.
+ *
+ * @NL80211_ATTR_TWT_RESPONDER: Enable target wait time responder support.
+ *
+ * @NL80211_ATTR_HE_OBSS_PD: nested attribute for OBSS Packet Detection
+ * functionality.
+ *
+ * @NL80211_ATTR_WIPHY_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz
+ * channel(s) that are allowed to be used for EDMG transmissions.
+ * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. (u8 attribute)
+ * @NL80211_ATTR_WIPHY_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes
+ * the allowed channel bandwidth configurations. (u8 attribute)
+ * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13.
+ *
+ * @NL80211_ATTR_VLAN_ID: VLAN ID (1..4094) for the station and VLAN group key
+ * (u16).
+ *
+ * @NL80211_ATTR_HE_BSS_COLOR: nested attribute for BSS Color Settings.
+ *
+ * @NL80211_ATTR_IFTYPE_AKM_SUITES: nested array attribute, with each entry
+ * using attributes from &enum nl80211_iftype_akm_attributes. This
+ * attribute is sent in a response to %NL80211_CMD_GET_WIPHY indicating
+ * supported AKM suites capability per interface. AKMs advertised in
+ * %NL80211_ATTR_AKM_SUITES are default capabilities if AKM suites not
+ * advertised for a specific interface type.
+ *
+ * @NL80211_ATTR_TID_CONFIG: TID specific configuration in a
+ * nested attribute with &enum nl80211_tid_config_attr sub-attributes;
+ * on output (in wiphy attributes) it contains only the feature sub-
+ * attributes.
+ *
+ * @NL80211_ATTR_CONTROL_PORT_NO_PREAUTH: disable preauth frame rx on control
+ * port in order to forward/receive them as ordinary data frames.
+ *
+ * @NL80211_ATTR_PMK_LIFETIME: Maximum lifetime for PMKSA in seconds (u32,
+ * dot11RSNAConfigPMKReauthThreshold; 0 is not a valid value).
+ * An optional parameter configured through %NL80211_CMD_SET_PMKSA.
+ * Drivers that trigger roaming need to know the lifetime of the
+ * configured PMKSA for triggering the full vs. PMKSA caching based
+ * authentication. This timeout helps authentication methods like SAE,
+ * where PMK gets updated only by going through a full (new SAE)
+ * authentication instead of getting updated during an association for EAP
+ * authentication. No new full authentication within the PMK expiry shall
+ * result in a disassociation at the end of the lifetime.
+ *
+ * @NL80211_ATTR_PMK_REAUTH_THRESHOLD: Reauthentication threshold time, in
+ * terms of percentage of %NL80211_ATTR_PMK_LIFETIME
+ * (u8, dot11RSNAConfigPMKReauthThreshold, 1..100). This is an optional
+ * parameter configured through %NL80211_CMD_SET_PMKSA. Requests the
+ * driver to trigger a full authentication roam (without PMKSA caching)
+ * after the reauthentication threshold time, but before the PMK lifetime
+ * has expired.
+ *
+ * Authentication methods like SAE need to be able to generate a new PMKSA
+ * entry without having to force a disconnection after the PMK timeout. If
+ * no roaming occurs between the reauth threshold and PMK expiration,
+ * disassociation is still forced.
+ * @NL80211_ATTR_RECEIVE_MULTICAST: multicast flag for the
+ * %NL80211_CMD_REGISTER_FRAME command, see the description there.
+ * @NL80211_ATTR_WIPHY_FREQ_OFFSET: offset of the associated
+ * %NL80211_ATTR_WIPHY_FREQ in positive KHz. Only valid when supplied with
+ * an %NL80211_ATTR_WIPHY_FREQ_OFFSET.
+ * @NL80211_ATTR_CENTER_FREQ1_OFFSET: Center frequency offset in KHz for the
+ * first channel segment specified in %NL80211_ATTR_CENTER_FREQ1.
+ * @NL80211_ATTR_SCAN_FREQ_KHZ: nested attribute with KHz frequencies
+ *
+ * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from
+ * association request when used with NL80211_CMD_NEW_STATION).
+ *
+ * @NL80211_ATTR_FILS_DISCOVERY: Optional parameter to configure FILS
+ * discovery. It is a nested attribute, see
+ * &enum nl80211_fils_discovery_attributes.
+ *
+ * @NL80211_ATTR_UNSOL_BCAST_PROBE_RESP: Optional parameter to configure
+ * unsolicited broadcast probe response. It is a nested attribute, see
+ * &enum nl80211_unsol_bcast_probe_resp_attributes.
+ *
+ * @NL80211_ATTR_S1G_CAPABILITY: S1G Capability information element (from
+ * association request when used with NL80211_CMD_NEW_STATION)
+ * @NL80211_ATTR_S1G_CAPABILITY_MASK: S1G Capability Information element
+ * override mask. Used with NL80211_ATTR_S1G_CAPABILITY in
+ * NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT.
+ *
+ * @NL80211_ATTR_SAE_PWE: Indicates the mechanism(s) allowed for SAE PWE
+ * derivation in WPA3-Personal networks which are using SAE authentication.
+ * This is a u8 attribute that encapsulates one of the values from
+ * &enum nl80211_sae_pwe_mechanism.
+ *
+ * @NL80211_ATTR_SAR_SPEC: SAR power limitation specification when
+ * used with %NL80211_CMD_SET_SAR_SPECS. The message contains fields
+ * of %nl80211_sar_attrs which specifies the sar type and related
+ * sar specs. Sar specs contains array of %nl80211_sar_specs_attrs.
+ *
+ * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and
+ * disassoc events to indicate that an immediate reconnect to the AP
+ * is desired.
+ *
+ * @NL80211_ATTR_OBSS_COLOR_BITMAP: bitmap of the u64 BSS colors for the
+ * %NL80211_CMD_OBSS_COLOR_COLLISION event.
+ *
+ * @NL80211_ATTR_COLOR_CHANGE_COUNT: u8 attribute specifying the number of TBTT's
+ * until the color switch event.
+ * @NL80211_ATTR_COLOR_CHANGE_COLOR: u8 attribute specifying the color that we are
+ * switching to
+ * @NL80211_ATTR_COLOR_CHANGE_ELEMS: Nested set of attributes containing the IE
+ * information for the time while performing a color switch.
*
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
NL80211_ATTR_CONN_FAILED_REASON,
- NL80211_ATTR_SAE_DATA,
+ NL80211_ATTR_AUTH_DATA,
NL80211_ATTR_VHT_CAPABILITY,
NL80211_ATTR_CH_SWITCH_COUNT,
NL80211_ATTR_CH_SWITCH_BLOCK_TX,
NL80211_ATTR_CSA_IES,
- NL80211_ATTR_CSA_C_OFF_BEACON,
- NL80211_ATTR_CSA_C_OFF_PRESP,
+ NL80211_ATTR_CNTDWN_OFFS_BEACON,
+ NL80211_ATTR_CNTDWN_OFFS_PRESP,
NL80211_ATTR_RXMGMT_FLAGS,
NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS,
NL80211_ATTR_SCHED_SCAN_PLANS,
+ NL80211_ATTR_PBSS,
+
+ NL80211_ATTR_BSS_SELECT,
+
+ NL80211_ATTR_STA_SUPPORT_P2P_PS,
+
+ NL80211_ATTR_PAD,
+
+ NL80211_ATTR_IFTYPE_EXT_CAPA,
+
+ NL80211_ATTR_MU_MIMO_GROUP_DATA,
+ NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR,
+
+ NL80211_ATTR_SCAN_START_TIME_TSF,
+ NL80211_ATTR_SCAN_START_TIME_TSF_BSSID,
+ NL80211_ATTR_MEASUREMENT_DURATION,
+ NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY,
+
+ NL80211_ATTR_MESH_PEER_AID,
+
+ NL80211_ATTR_NAN_MASTER_PREF,
+ NL80211_ATTR_BANDS,
+ NL80211_ATTR_NAN_FUNC,
+ NL80211_ATTR_NAN_MATCH,
+
+ NL80211_ATTR_FILS_KEK,
+ NL80211_ATTR_FILS_NONCES,
+
+ NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED,
+
+ NL80211_ATTR_BSSID,
+
+ NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI,
+ NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST,
+
+ NL80211_ATTR_TIMEOUT_REASON,
+
+ NL80211_ATTR_FILS_ERP_USERNAME,
+ NL80211_ATTR_FILS_ERP_REALM,
+ NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM,
+ NL80211_ATTR_FILS_ERP_RRK,
+ NL80211_ATTR_FILS_CACHE_ID,
+
+ NL80211_ATTR_PMK,
+
+ NL80211_ATTR_SCHED_SCAN_MULTI,
+ NL80211_ATTR_SCHED_SCAN_MAX_REQS,
+
+ NL80211_ATTR_WANT_1X_4WAY_HS,
+ NL80211_ATTR_PMKR0_NAME,
+ NL80211_ATTR_PORT_AUTHORIZED,
+
+ NL80211_ATTR_EXTERNAL_AUTH_ACTION,
+ NL80211_ATTR_EXTERNAL_AUTH_SUPPORT,
+
+ NL80211_ATTR_NSS,
+ NL80211_ATTR_ACK_SIGNAL,
+
+ NL80211_ATTR_CONTROL_PORT_OVER_NL80211,
+
+ NL80211_ATTR_TXQ_STATS,
+ NL80211_ATTR_TXQ_LIMIT,
+ NL80211_ATTR_TXQ_MEMORY_LIMIT,
+ NL80211_ATTR_TXQ_QUANTUM,
+
+ NL80211_ATTR_HE_CAPABILITY,
+
+ NL80211_ATTR_FTM_RESPONDER,
+
+ NL80211_ATTR_FTM_RESPONDER_STATS,
+
+ NL80211_ATTR_TIMEOUT,
+
+ NL80211_ATTR_PEER_MEASUREMENTS,
+
+ NL80211_ATTR_AIRTIME_WEIGHT,
+ NL80211_ATTR_STA_TX_POWER_SETTING,
+ NL80211_ATTR_STA_TX_POWER,
+
+ NL80211_ATTR_SAE_PASSWORD,
+
+ NL80211_ATTR_TWT_RESPONDER,
+
+ NL80211_ATTR_HE_OBSS_PD,
+
+ NL80211_ATTR_WIPHY_EDMG_CHANNELS,
+ NL80211_ATTR_WIPHY_EDMG_BW_CONFIG,
+
+ NL80211_ATTR_VLAN_ID,
+
+ NL80211_ATTR_HE_BSS_COLOR,
+
+ NL80211_ATTR_IFTYPE_AKM_SUITES,
+
+ NL80211_ATTR_TID_CONFIG,
+
+ NL80211_ATTR_CONTROL_PORT_NO_PREAUTH,
+
+ NL80211_ATTR_PMK_LIFETIME,
+ NL80211_ATTR_PMK_REAUTH_THRESHOLD,
+
+ NL80211_ATTR_RECEIVE_MULTICAST,
+ NL80211_ATTR_WIPHY_FREQ_OFFSET,
+ NL80211_ATTR_CENTER_FREQ1_OFFSET,
+ NL80211_ATTR_SCAN_FREQ_KHZ,
+
+ NL80211_ATTR_HE_6GHZ_CAPABILITY,
+
+ NL80211_ATTR_FILS_DISCOVERY,
+
+ NL80211_ATTR_UNSOL_BCAST_PROBE_RESP,
+
+ NL80211_ATTR_S1G_CAPABILITY,
+ NL80211_ATTR_S1G_CAPABILITY_MASK,
+
+ NL80211_ATTR_SAE_PWE,
+
+ NL80211_ATTR_RECONNECT_REQUESTED,
+
+ NL80211_ATTR_SAR_SPEC,
+
+ NL80211_ATTR_DISABLE_HE,
+
+ NL80211_ATTR_OBSS_COLOR_BITMAP,
+
+ NL80211_ATTR_COLOR_CHANGE_COUNT,
+ NL80211_ATTR_COLOR_CHANGE_COLOR,
+ NL80211_ATTR_COLOR_CHANGE_ELEMS,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
#define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
#define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER
+#define NL80211_ATTR_SAE_DATA NL80211_ATTR_AUTH_DATA
+#define NL80211_ATTR_CSA_C_OFF_BEACON NL80211_ATTR_CNTDWN_OFFS_BEACON
+#define NL80211_ATTR_CSA_C_OFF_PRESP NL80211_ATTR_CNTDWN_OFFS_PRESP
/*
* Allow user space programs to use #ifdef on new attributes by defining them
#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS
#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
+#define NL80211_WIPHY_NAME_MAXLEN 64
+
#define NL80211_MAX_SUPP_RATES 32
#define NL80211_MAX_SUPP_HT_RATES 77
-#define NL80211_MAX_SUPP_REG_RULES 64
+#define NL80211_MAX_SUPP_REG_RULES 128
#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0
#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16
#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24
#define NL80211_HT_CAPABILITY_LEN 26
#define NL80211_VHT_CAPABILITY_LEN 12
-
+#define NL80211_HE_MIN_CAPABILITY_LEN 16
+#define NL80211_HE_MAX_CAPABILITY_LEN 54
#define NL80211_MAX_NR_CIPHER_SUITES 5
#define NL80211_MAX_NR_AKM_SUITES 2
* commands to create and destroy one
* @NL80211_IF_TYPE_OCB: Outside Context of a BSS
* This mode corresponds to the MIB variable dot11OCBActivated=true
+ * @NL80211_IFTYPE_NAN: NAN device interface type (not a netdev)
* @NL80211_IFTYPE_MAX: highest interface type number currently defined
* @NUM_NL80211_IFTYPES: number of defined interface types
*
NL80211_IFTYPE_P2P_GO,
NL80211_IFTYPE_P2P_DEVICE,
NL80211_IFTYPE_OCB,
+ NL80211_IFTYPE_NAN,
/* keep last */
NUM_NL80211_IFTYPES,
NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1
};
+/**
+ * enum nl80211_sta_p2p_ps_status - station support of P2P PS
+ *
+ * @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism
+ * @@NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism
+ * @NUM_NL80211_P2P_PS_STATUS: number of values
+ */
+enum nl80211_sta_p2p_ps_status {
+ NL80211_P2P_PS_UNSUPPORTED = 0,
+ NL80211_P2P_PS_SUPPORTED,
+
+ NUM_NL80211_P2P_PS_STATUS,
+};
+
#define NL80211_STA_FLAG_MAX_OLD_API NL80211_STA_FLAG_TDLS_PEER
/**
__u32 set;
} __attribute__((packed));
+/**
+ * enum nl80211_he_gi - HE guard interval
+ * @NL80211_RATE_INFO_HE_GI_0_8: 0.8 usec
+ * @NL80211_RATE_INFO_HE_GI_1_6: 1.6 usec
+ * @NL80211_RATE_INFO_HE_GI_3_2: 3.2 usec
+ */
+enum nl80211_he_gi {
+ NL80211_RATE_INFO_HE_GI_0_8,
+ NL80211_RATE_INFO_HE_GI_1_6,
+ NL80211_RATE_INFO_HE_GI_3_2,
+};
+
+/**
+ * enum nl80211_he_ltf - HE long training field
+ * @NL80211_RATE_INFO_HE_1xLTF: 3.2 usec
+ * @NL80211_RATE_INFO_HE_2xLTF: 6.4 usec
+ * @NL80211_RATE_INFO_HE_4xLTF: 12.8 usec
+ */
+enum nl80211_he_ltf {
+ NL80211_RATE_INFO_HE_1XLTF,
+ NL80211_RATE_INFO_HE_2XLTF,
+ NL80211_RATE_INFO_HE_4XLTF,
+};
+
+/**
+ * enum nl80211_he_ru_alloc - HE RU allocation values
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_26: 26-tone RU allocation
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_52: 52-tone RU allocation
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_106: 106-tone RU allocation
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_242: 242-tone RU allocation
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_484: 484-tone RU allocation
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_996: 996-tone RU allocation
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_2x996: 2x996-tone RU allocation
+ */
+enum nl80211_he_ru_alloc {
+ NL80211_RATE_INFO_HE_RU_ALLOC_26,
+ NL80211_RATE_INFO_HE_RU_ALLOC_52,
+ NL80211_RATE_INFO_HE_RU_ALLOC_106,
+ NL80211_RATE_INFO_HE_RU_ALLOC_242,
+ NL80211_RATE_INFO_HE_RU_ALLOC_484,
+ NL80211_RATE_INFO_HE_RU_ALLOC_996,
+ NL80211_RATE_INFO_HE_RU_ALLOC_2x996,
+};
+
/**
* enum nl80211_rate_info - bitrate information
*
* TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames;
* each one of those is again nested with &enum nl80211_tid_stats
* attributes carrying the actual values.
+ * @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames
+ * received from the station (u64, usec)
+ * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment
+ * @NL80211_STA_INFO_ACK_SIGNAL: signal strength of the last ACK frame(u8, dBm)
+ * @NL80211_STA_INFO_ACK_SIGNAL_AVG: avg signal strength of ACK frames (s8, dBm)
+ * @NL80211_STA_INFO_RX_MPDUS: total number of received packets (MPDUs)
+ * (u32, from this station)
+ * @NL80211_STA_INFO_FCS_ERROR_COUNT: total number of packets (MPDUs) received
+ * with an FCS error (u32, from this station). This count may not include
+ * some packets with an FCS error due to TA corruption. Hence this counter
+ * might not be fully accurate.
+ * @NL80211_STA_INFO_CONNECTED_TO_GATE: set to true if STA has a path to a
+ * mesh gate (u8, 0 or 1)
+ * @NL80211_STA_INFO_TX_DURATION: aggregate PPDU duration for all frames
+ * sent to the station (u64, usec)
+ * @NL80211_STA_INFO_AIRTIME_WEIGHT: current airtime weight for station (u16)
+ * @NL80211_STA_INFO_AIRTIME_LINK_METRIC: airtime link metric for mesh station
+ * @NL80211_STA_INFO_ASSOC_AT_BOOTTIME: Timestamp (CLOCK_BOOTTIME, nanoseconds)
+ * of STA's association
+ * @NL80211_STA_INFO_CONNECTED_TO_AS: set to true if STA has a path to a
+ * authentication server (u8, 0 or 1)
* @__NL80211_STA_INFO_AFTER_LAST: internal
* @NL80211_STA_INFO_MAX: highest possible station info attribute
*/
NL80211_STA_INFO_BEACON_RX,
NL80211_STA_INFO_BEACON_SIGNAL_AVG,
NL80211_STA_INFO_TID_STATS,
+ NL80211_STA_INFO_RX_DURATION,
+ NL80211_STA_INFO_PAD,
+ NL80211_STA_INFO_ACK_SIGNAL,
+ NL80211_STA_INFO_ACK_SIGNAL_AVG,
+ NL80211_STA_INFO_RX_MPDUS,
+ NL80211_STA_INFO_FCS_ERROR_COUNT,
+ NL80211_STA_INFO_CONNECTED_TO_GATE,
+ NL80211_STA_INFO_TX_DURATION,
+ NL80211_STA_INFO_AIRTIME_WEIGHT,
+ NL80211_STA_INFO_AIRTIME_LINK_METRIC,
+ NL80211_STA_INFO_ASSOC_AT_BOOTTIME,
+ NL80211_STA_INFO_CONNECTED_TO_AS,
/* keep last */
__NL80211_STA_INFO_AFTER_LAST,
NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1
};
+/* we renamed this - stay compatible */
+#define NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG NL80211_STA_INFO_ACK_SIGNAL_AVG
+
+
/**
* enum nl80211_tid_stats - per TID statistics attributes
* @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved
* transmitted MSDUs (not counting the first attempt; u64)
* @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted
* MSDUs (u64)
+ * @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment
+ * @NL80211_TID_STATS_TXQ_STATS: TXQ stats (nested attribute)
* @NUM_NL80211_TID_STATS: number of attributes here
* @NL80211_TID_STATS_MAX: highest numbered attribute here
*/
NL80211_TID_STATS_TX_MSDU,
NL80211_TID_STATS_TX_MSDU_RETRIES,
NL80211_TID_STATS_TX_MSDU_FAILED,
+ NL80211_TID_STATS_PAD,
+ NL80211_TID_STATS_TXQ_STATS,
/* keep last */
NUM_NL80211_TID_STATS,
NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 1
};
+/**
+ * enum nl80211_txq_stats - per TXQ statistics attributes
+ * @__NL80211_TXQ_STATS_INVALID: attribute number 0 is reserved
+ * @NUM_NL80211_TXQ_STATS: number of attributes here
+ * @NL80211_TXQ_STATS_BACKLOG_BYTES: number of bytes currently backlogged
+ * @NL80211_TXQ_STATS_BACKLOG_PACKETS: number of packets currently
+ * backlogged
+ * @NL80211_TXQ_STATS_FLOWS: total number of new flows seen
+ * @NL80211_TXQ_STATS_DROPS: total number of packet drops
+ * @NL80211_TXQ_STATS_ECN_MARKS: total number of packet ECN marks
+ * @NL80211_TXQ_STATS_OVERLIMIT: number of drops due to queue space overflow
+ * @NL80211_TXQ_STATS_OVERMEMORY: number of drops due to memory limit overflow
+ * (only for per-phy stats)
+ * @NL80211_TXQ_STATS_COLLISIONS: number of hash collisions
+ * @NL80211_TXQ_STATS_TX_BYTES: total number of bytes dequeued from TXQ
+ * @NL80211_TXQ_STATS_TX_PACKETS: total number of packets dequeued from TXQ
+ * @NL80211_TXQ_STATS_MAX_FLOWS: number of flow buckets for PHY
+ * @NL80211_TXQ_STATS_MAX: highest numbered attribute here
+ */
+enum nl80211_txq_stats {
+ __NL80211_TXQ_STATS_INVALID,
+ NL80211_TXQ_STATS_BACKLOG_BYTES,
+ NL80211_TXQ_STATS_BACKLOG_PACKETS,
+ NL80211_TXQ_STATS_FLOWS,
+ NL80211_TXQ_STATS_DROPS,
+ NL80211_TXQ_STATS_ECN_MARKS,
+ NL80211_TXQ_STATS_OVERLIMIT,
+ NL80211_TXQ_STATS_OVERMEMORY,
+ NL80211_TXQ_STATS_COLLISIONS,
+ NL80211_TXQ_STATS_TX_BYTES,
+ NL80211_TXQ_STATS_TX_PACKETS,
+ NL80211_TXQ_STATS_MAX_FLOWS,
+
+ /* keep last */
+ NUM_NL80211_TXQ_STATS,
+ NL80211_TXQ_STATS_MAX = NUM_NL80211_TXQ_STATS - 1
+};
+
/**
* enum nl80211_mpath_flags - nl80211 mesh path flags
*
* &enum nl80211_mpath_flags;
* @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
* @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries
+ * @NL80211_MPATH_INFO_HOP_COUNT: hop count to destination
+ * @NL80211_MPATH_INFO_PATH_CHANGE: total number of path changes to destination
* @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number
- * currently defind
+ * currently defined
* @__NL80211_MPATH_INFO_AFTER_LAST: internal use
*/
enum nl80211_mpath_info {
NL80211_MPATH_INFO_FLAGS,
NL80211_MPATH_INFO_DISCOVERY_TIMEOUT,
NL80211_MPATH_INFO_DISCOVERY_RETRIES,
+ NL80211_MPATH_INFO_HOP_COUNT,
+ NL80211_MPATH_INFO_PATH_CHANGE,
/* keep last */
__NL80211_MPATH_INFO_AFTER_LAST,
* defined
* @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16),
* given for all 6 GHz band channels
+ * @NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS: vendor element capabilities that are
+ * advertised on this band/for this iftype (binary)
* @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use
*/
enum nl80211_band_iftype_attr {
NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET,
NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE,
NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA,
+ NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS,
/* keep last */
__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST,
* @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE
* @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using
* attributes from &enum nl80211_band_iftype_attr
+ * @NL80211_BAND_ATTR_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz
+ * channel(s) that are allowed to be used for EDMG transmissions.
+ * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251.
+ * @NL80211_BAND_ATTR_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes
+ * the allowed channel bandwidth configurations.
+ * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13.
* @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
* @__NL80211_BAND_ATTR_AFTER_LAST: internal use
*/
NL80211_BAND_ATTR_VHT_CAPA,
NL80211_BAND_ATTR_IFTYPE_DATA,
+ NL80211_BAND_ATTR_EDMG_CHANNELS,
+ NL80211_BAND_ATTR_EDMG_BW_CONFIG,
+
/* keep last */
__NL80211_BAND_ATTR_AFTER_LAST,
NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
+/**
+ * enum nl80211_wmm_rule - regulatory wmm rule
+ *
+ * @__NL80211_WMMR_INVALID: attribute number 0 is reserved
+ * @NL80211_WMMR_CW_MIN: Minimum contention window slot.
+ * @NL80211_WMMR_CW_MAX: Maximum contention window slot.
+ * @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space.
+ * @NL80211_WMMR_TXOP: Maximum allowed tx operation time.
+ * @nl80211_WMMR_MAX: highest possible wmm rule.
+ * @__NL80211_WMMR_LAST: Internal use.
+ */
+enum nl80211_wmm_rule {
+ __NL80211_WMMR_INVALID,
+ NL80211_WMMR_CW_MIN,
+ NL80211_WMMR_CW_MAX,
+ NL80211_WMMR_AIFSN,
+ NL80211_WMMR_TXOP,
+
+ /* keep last */
+ __NL80211_WMMR_LAST,
+ NL80211_WMMR_MAX = __NL80211_WMMR_LAST - 1
+};
+
/**
* enum nl80211_frequency_attr - frequency attributes
* @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved
* on this channel in current regulatory domain.
* @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed
* on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_WMM: this channel has wmm limitations.
+ * This is a nested attribute that contains the wmm limitation per AC.
+ * (see &enum nl80211_wmm_rule)
+ * @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel
+ * in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_OFFSET: frequency offset in KHz
+ * @NL80211_FREQUENCY_ATTR_1MHZ: 1 MHz operation is allowed
+ * on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_2MHZ: 2 MHz operation is allowed
+ * on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_4MHZ: 4 MHz operation is allowed
+ * on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_8MHZ: 8 MHz operation is allowed
+ * on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_16MHZ: 16 MHz operation is allowed
+ * on this channel in current regulatory domain.
* @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
* currently defined
* @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
NL80211_FREQUENCY_ATTR_IR_CONCURRENT,
NL80211_FREQUENCY_ATTR_NO_20MHZ,
NL80211_FREQUENCY_ATTR_NO_10MHZ,
+ NL80211_FREQUENCY_ATTR_WMM,
+ NL80211_FREQUENCY_ATTR_NO_HE,
+ NL80211_FREQUENCY_ATTR_OFFSET,
+ NL80211_FREQUENCY_ATTR_1MHZ,
+ NL80211_FREQUENCY_ATTR_2MHZ,
+ NL80211_FREQUENCY_ATTR_4MHZ,
+ NL80211_FREQUENCY_ATTR_8MHZ,
+ NL80211_FREQUENCY_ATTR_16MHZ,
/* keep last */
__NL80211_FREQUENCY_ATTR_AFTER_LAST,
* @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
* @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
* only report BSS with matching SSID.
+ * (This cannot be used together with BSSID.)
* @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a
* BSS in scan results. Filtering is turned off if not specified. Note that
* if this attribute is in a match set of its own, then it is treated as
* how this API was implemented in the past. Also, due to the same problem,
* the only way to create a matchset with only an RSSI filter (with this
* attribute) is if there's only a single matchset with the RSSI attribute.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI: Flag indicating whether
+ * %NL80211_SCHED_SCAN_MATCH_ATTR_RSSI to be used as absolute RSSI or
+ * relative to current bss's RSSI.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST: When present the RSSI level for
+ * BSS-es in the specified band is to be adjusted before doing
+ * RSSI-based BSS selection. The attribute value is a packed structure
+ * value as specified by &struct nl80211_bss_select_rssi_adjust.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching
+ * (this cannot be used together with SSID).
+ * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Nested attribute that carries the
+ * band specific minimum rssi thresholds for the bands defined in
+ * enum nl80211_band. The minimum rssi threshold value(s32) specific to a
+ * band shall be encapsulated in attribute with type value equals to one
+ * of the NL80211_BAND_* defined in enum nl80211_band. For example, the
+ * minimum rssi threshold value for 2.4GHZ band shall be encapsulated
+ * within an attribute of type NL80211_BAND_2GHZ. And one or more of such
+ * attributes will be nested within this attribute.
* @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
* attribute number currently defined
* @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
NL80211_SCHED_SCAN_MATCH_ATTR_SSID,
NL80211_SCHED_SCAN_MATCH_ATTR_RSSI,
+ NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI,
+ NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST,
+ NL80211_SCHED_SCAN_MATCH_ATTR_BSSID,
+ NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI,
/* keep last */
__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
* @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
* base on contiguous rules and wider channels will be allowed to cross
* multiple contiguous/overlapping frequency ranges.
- * @NL80211_RRF_IR_CONCURRENT: See &NL80211_FREQUENCY_ATTR_IR_CONCURRENT
+ * @NL80211_RRF_IR_CONCURRENT: See %NL80211_FREQUENCY_ATTR_IR_CONCURRENT
* @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation
* @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation
* @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed
* @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed
+ * @NL80211_RRF_NO_HE: HE operation not allowed
*/
enum nl80211_reg_rule_flags {
NL80211_RRF_NO_OFDM = 1<<0,
NL80211_RRF_NO_HT40PLUS = 1<<14,
NL80211_RRF_NO_80MHZ = 1<<15,
NL80211_RRF_NO_160MHZ = 1<<16,
+ NL80211_RRF_NO_HE = 1<<17,
};
#define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR
* transmitting data (on channel or globally)
* @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan
* (on this channel or globally)
+ * @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment
+ * @NL80211_SURVEY_INFO_TIME_BSS_RX: amount of time the radio spent
+ * receiving frames destined to the local BSS
* @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
* currently defined
+ * @NL80211_SURVEY_INFO_FREQUENCY_OFFSET: center frequency offset in KHz
* @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
*/
enum nl80211_survey_info {
NL80211_SURVEY_INFO_TIME_RX,
NL80211_SURVEY_INFO_TIME_TX,
NL80211_SURVEY_INFO_TIME_SCAN,
+ NL80211_SURVEY_INFO_PAD,
+ NL80211_SURVEY_INFO_TIME_BSS_RX,
+ NL80211_SURVEY_INFO_FREQUENCY_OFFSET,
/* keep last */
__NL80211_SURVEY_INFO_AFTER_LAST,
* remove it from the STA's list of peers. You may set this to 0 to disable
* the removal of the STA. Default is 30 minutes.
*
+ * @NL80211_MESHCONF_CONNECTED_TO_GATE: If set to true then this mesh STA
+ * will advertise that it is connected to a gate in the mesh formation
+ * field. If left unset then the mesh formation field will only
+ * advertise such if there is an active root mesh path.
+ *
+ * @NL80211_MESHCONF_NOLEARN: Try to avoid multi-hop path discovery (e.g.
+ * PREQ/PREP for HWMP) if the destination is a direct neighbor. Note that
+ * this might not be the optimal decision as a multi-hop route might be
+ * better. So if using this setting you will likely also want to disable
+ * dot11MeshForwarding and use another mesh routing protocol on top.
+ *
+ * @NL80211_MESHCONF_CONNECTED_TO_AS: If set to true then this mesh STA
+ * will advertise that it is connected to a authentication server
+ * in the mesh formation field.
+ *
* @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
*/
enum nl80211_meshconf_params {
NL80211_MESHCONF_POWER_MODE,
NL80211_MESHCONF_AWAKE_WINDOW,
NL80211_MESHCONF_PLINK_TIMEOUT,
+ NL80211_MESHCONF_CONNECTED_TO_GATE,
+ NL80211_MESHCONF_NOLEARN,
+ NL80211_MESHCONF_CONNECTED_TO_AS,
/* keep last */
__NL80211_MESHCONF_ATTR_AFTER_LAST,
NL80211_CHAN_HT40PLUS
};
+/**
+ * enum nl80211_key_mode - Key mode
+ *
+ * @NL80211_KEY_RX_TX: (Default)
+ * Key can be used for Rx and Tx immediately
+ *
+ * The following modes can only be selected for unicast keys and when the
+ * driver supports @NL80211_EXT_FEATURE_EXT_KEY_ID:
+ *
+ * @NL80211_KEY_NO_TX: Only allowed in combination with @NL80211_CMD_NEW_KEY:
+ * Unicast key can only be used for Rx, Tx not allowed, yet
+ * @NL80211_KEY_SET_TX: Only allowed in combination with @NL80211_CMD_SET_KEY:
+ * The unicast key identified by idx and mac is cleared for Tx and becomes
+ * the preferred Tx key for the station.
+ */
+enum nl80211_key_mode {
+ NL80211_KEY_RX_TX,
+ NL80211_KEY_NO_TX,
+ NL80211_KEY_SET_TX
+};
+
/**
* enum nl80211_chan_width - channel width definitions
*
* attribute must be provided as well
* @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel
* @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel
+ * @NL80211_CHAN_WIDTH_1: 1 MHz OFDM channel
+ * @NL80211_CHAN_WIDTH_2: 2 MHz OFDM channel
+ * @NL80211_CHAN_WIDTH_4: 4 MHz OFDM channel
+ * @NL80211_CHAN_WIDTH_8: 8 MHz OFDM channel
+ * @NL80211_CHAN_WIDTH_16: 16 MHz OFDM channel
*/
enum nl80211_chan_width {
NL80211_CHAN_WIDTH_20_NOHT,
NL80211_CHAN_WIDTH_160,
NL80211_CHAN_WIDTH_5,
NL80211_CHAN_WIDTH_10,
+ NL80211_CHAN_WIDTH_1,
+ NL80211_CHAN_WIDTH_2,
+ NL80211_CHAN_WIDTH_4,
+ NL80211_CHAN_WIDTH_8,
+ NL80211_CHAN_WIDTH_16,
};
/**
* @NL80211_BSS_CHAN_WIDTH_20: control channel is 20 MHz wide or compatible
* @NL80211_BSS_CHAN_WIDTH_10: control channel is 10 MHz wide
* @NL80211_BSS_CHAN_WIDTH_5: control channel is 5 MHz wide
+ * @NL80211_BSS_CHAN_WIDTH_1: control channel is 1 MHz wide
+ * @NL80211_BSS_CHAN_WIDTH_2: control channel is 2 MHz wide
*/
enum nl80211_bss_scan_width {
NL80211_BSS_CHAN_WIDTH_20,
NL80211_BSS_CHAN_WIDTH_10,
NL80211_BSS_CHAN_WIDTH_5,
+ NL80211_BSS_CHAN_WIDTH_1,
+ NL80211_BSS_CHAN_WIDTH_2,
};
/**
* @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry
* was last updated by a received frame. The value is expected to be
* accurate to about 10ms. (u64, nanoseconds)
+ * @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment
+ * @NL80211_BSS_PARENT_TSF: the time at the start of reception of the first
+ * octet of the timestamp field of the last beacon/probe received for
+ * this BSS. The time is the TSF of the BSS specified by
+ * @NL80211_BSS_PARENT_BSSID. (u64).
+ * @NL80211_BSS_PARENT_BSSID: the BSS according to which @NL80211_BSS_PARENT_TSF
+ * is set.
+ * @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update.
+ * Contains a nested array of signal strength attributes (u8, dBm),
+ * using the nesting index as the antenna number.
+ * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz
* @__NL80211_BSS_AFTER_LAST: internal
* @NL80211_BSS_MAX: highest BSS attribute
*/
NL80211_BSS_BEACON_TSF,
NL80211_BSS_PRESP_DATA,
NL80211_BSS_LAST_SEEN_BOOTTIME,
+ NL80211_BSS_PAD,
+ NL80211_BSS_PARENT_TSF,
+ NL80211_BSS_PARENT_BSSID,
+ NL80211_BSS_CHAIN_SIGNAL,
+ NL80211_BSS_FREQUENCY_OFFSET,
/* keep last */
__NL80211_BSS_AFTER_LAST,
* @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
* @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
* @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals
+ * @NL80211_AUTHTYPE_FILS_SK: Fast Initial Link Setup shared key
+ * @NL80211_AUTHTYPE_FILS_SK_PFS: Fast Initial Link Setup shared key with PFS
+ * @NL80211_AUTHTYPE_FILS_PK: Fast Initial Link Setup public key
* @__NL80211_AUTHTYPE_NUM: internal
* @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
* @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
NL80211_AUTHTYPE_FT,
NL80211_AUTHTYPE_NETWORK_EAP,
NL80211_AUTHTYPE_SAE,
+ NL80211_AUTHTYPE_FILS_SK,
+ NL80211_AUTHTYPE_FILS_SK_PFS,
+ NL80211_AUTHTYPE_FILS_PK,
/* keep last */
__NL80211_AUTHTYPE_NUM,
* enum nl80211_mfp - Management frame protection state
* @NL80211_MFP_NO: Management frame protection not used
* @NL80211_MFP_REQUIRED: Management frame protection required
+ * @NL80211_MFP_OPTIONAL: Management frame protection is optional
*/
enum nl80211_mfp {
NL80211_MFP_NO,
NL80211_MFP_REQUIRED,
+ NL80211_MFP_OPTIONAL,
};
enum nl80211_wpa_versions {
NL80211_WPA_VERSION_1 = 1 << 0,
NL80211_WPA_VERSION_2 = 1 << 1,
+ NL80211_WPA_VERSION_3 = 1 << 2,
};
/**
* @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags
* attributes, specifying what a key should be set as default as.
* See &enum nl80211_key_default_types.
+ * @NL80211_KEY_MODE: the mode from enum nl80211_key_mode.
+ * Defaults to @NL80211_KEY_RX_TX.
+ * @NL80211_KEY_DEFAULT_BEACON: flag indicating default Beacon frame key
+ *
* @__NL80211_KEY_AFTER_LAST: internal
* @NL80211_KEY_MAX: highest key attribute
*/
NL80211_KEY_DEFAULT_MGMT,
NL80211_KEY_TYPE,
NL80211_KEY_DEFAULT_TYPES,
+ NL80211_KEY_MODE,
+ NL80211_KEY_DEFAULT_BEACON,
/* keep last */
__NL80211_KEY_AFTER_LAST,
* @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection,
* see &struct nl80211_txrate_vht
* @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi
+ * @NL80211_TXRATE_HE: HE rates allowed for TX rate selection,
+ * see &struct nl80211_txrate_he
+ * @NL80211_TXRATE_HE_GI: configure HE GI, 0.8us, 1.6us and 3.2us.
+ * @NL80211_TXRATE_HE_LTF: configure HE LTF, 1XLTF, 2XLTF and 4XLTF.
* @__NL80211_TXRATE_AFTER_LAST: internal
* @NL80211_TXRATE_MAX: highest TX rate attribute
*/
NL80211_TXRATE_HT,
NL80211_TXRATE_VHT,
NL80211_TXRATE_GI,
+ NL80211_TXRATE_HE,
+ NL80211_TXRATE_HE_GI,
+ NL80211_TXRATE_HE_LTF,
/* keep last */
__NL80211_TXRATE_AFTER_LAST,
__u16 mcs[NL80211_VHT_NSS_MAX];
};
+#define NL80211_HE_NSS_MAX 8
+/**
+ * struct nl80211_txrate_he - HE MCS/NSS txrate bitmap
+ * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.)
+ */
+struct nl80211_txrate_he {
+ __u16 mcs[NL80211_HE_NSS_MAX];
+};
+
enum nl80211_txrate_gi {
NL80211_TXRATE_DEFAULT_GI,
NL80211_TXRATE_FORCE_SGI,
* enum nl80211_band - Frequency band
* @NL80211_BAND_2GHZ: 2.4 GHz ISM band
* @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
- * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz)
+ * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz)
+ * @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz)
+ * @NL80211_BAND_S1GHZ: around 900MHz, supported by S1G PHYs
+ * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace
+ * since newer kernel versions may support more bands
*/
enum nl80211_band {
NL80211_BAND_2GHZ,
NL80211_BAND_5GHZ,
NL80211_BAND_60GHZ,
+ NL80211_BAND_6GHZ,
+ NL80211_BAND_S1GHZ,
+
+ NUM_NL80211_BANDS,
};
/**
* @__NL80211_ATTR_CQM_INVALID: invalid
* @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies
* the threshold for the RSSI level at which an event will be sent. Zero
- * to disable.
+ * to disable. Alternatively, if %NL80211_EXT_FEATURE_CQM_RSSI_LIST is
+ * set, multiple values can be supplied as a low-to-high sorted array of
+ * threshold values in dBm. Events will be sent when the RSSI value
+ * crosses any of the thresholds.
* @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies
* the minimum amount the RSSI level must change after an event before a
* new event may be issued (to reduce effects of RSSI oscillation).
* %NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting.
* @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon
* loss event
+ * @NL80211_ATTR_CQM_RSSI_LEVEL: the RSSI value in dBm that triggered the
+ * RSSI threshold event.
* @__NL80211_ATTR_CQM_AFTER_LAST: internal
* @NL80211_ATTR_CQM_MAX: highest key attribute
*/
NL80211_ATTR_CQM_TXE_PKTS,
NL80211_ATTR_CQM_TXE_INTVL,
NL80211_ATTR_CQM_BEACON_LOSS_EVENT,
+ NL80211_ATTR_CQM_RSSI_LEVEL,
/* keep last */
__NL80211_ATTR_CQM_AFTER_LAST,
NL80211_TX_POWER_FIXED,
};
+/**
+ * enum nl80211_tid_config - TID config state
+ * @NL80211_TID_CONFIG_ENABLE: Enable config for the TID
+ * @NL80211_TID_CONFIG_DISABLE: Disable config for the TID
+ */
+enum nl80211_tid_config {
+ NL80211_TID_CONFIG_ENABLE,
+ NL80211_TID_CONFIG_DISABLE,
+};
+
+/* enum nl80211_tx_rate_setting - TX rate configuration type
+ * @NL80211_TX_RATE_AUTOMATIC: automatically determine TX rate
+ * @NL80211_TX_RATE_LIMITED: limit the TX rate by the TX rate parameter
+ * @NL80211_TX_RATE_FIXED: fix TX rate to the TX rate parameter
+ */
+enum nl80211_tx_rate_setting {
+ NL80211_TX_RATE_AUTOMATIC,
+ NL80211_TX_RATE_LIMITED,
+ NL80211_TX_RATE_FIXED,
+};
+
+/* enum nl80211_tid_config_attr - TID specific configuration.
+ * @NL80211_TID_CONFIG_ATTR_PAD: pad attribute for 64-bit values
+ * @NL80211_TID_CONFIG_ATTR_VIF_SUPP: a bitmap (u64) of attributes supported
+ * for per-vif configuration; doesn't list the ones that are generic
+ * (%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE).
+ * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but
+ * per peer instead.
+ * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if set indicates
+ * that the new configuration overrides all previous peer
+ * configurations, otherwise previous peer specific configurations
+ * should be left untouched.
+ * @NL80211_TID_CONFIG_ATTR_TIDS: a bitmask value of TIDs (bit 0 to 7)
+ * Its type is u16.
+ * @NL80211_TID_CONFIG_ATTR_NOACK: Configure ack policy for the TID.
+ * specified in %NL80211_TID_CONFIG_ATTR_TID. see %enum nl80211_tid_config.
+ * Its type is u8.
+ * @NL80211_TID_CONFIG_ATTR_RETRY_SHORT: Number of retries used with data frame
+ * transmission, user-space sets this configuration in
+ * &NL80211_CMD_SET_TID_CONFIG. It is u8 type, min value is 1 and
+ * the max value is advertised by the driver in this attribute on
+ * output in wiphy capabilities.
+ * @NL80211_TID_CONFIG_ATTR_RETRY_LONG: Number of retries used with data frame
+ * transmission, user-space sets this configuration in
+ * &NL80211_CMD_SET_TID_CONFIG. Its type is u8, min value is 1 and
+ * the max value is advertised by the driver in this attribute on
+ * output in wiphy capabilities.
+ * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable MPDU aggregation
+ * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS.
+ * Its type is u8, using the values from &nl80211_tid_config.
+ * @NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL: Enable/Disable RTS_CTS for the TIDs
+ * specified in %NL80211_TID_CONFIG_ATTR_TIDS. It is u8 type, using
+ * the values from &nl80211_tid_config.
+ * @NL80211_TID_CONFIG_ATTR_AMSDU_CTRL: Enable/Disable MSDU aggregation
+ * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS.
+ * Its type is u8, using the values from &nl80211_tid_config.
+ * @NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE: This attribute will be useful
+ * to notfiy the driver that what type of txrate should be used
+ * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. using
+ * the values form &nl80211_tx_rate_setting.
+ * @NL80211_TID_CONFIG_ATTR_TX_RATE: Data frame TX rate mask should be applied
+ * with the parameters passed through %NL80211_ATTR_TX_RATES.
+ * configuration is applied to the data frame for the tid to that connected
+ * station.
+ */
+enum nl80211_tid_config_attr {
+ __NL80211_TID_CONFIG_ATTR_INVALID,
+ NL80211_TID_CONFIG_ATTR_PAD,
+ NL80211_TID_CONFIG_ATTR_VIF_SUPP,
+ NL80211_TID_CONFIG_ATTR_PEER_SUPP,
+ NL80211_TID_CONFIG_ATTR_OVERRIDE,
+ NL80211_TID_CONFIG_ATTR_TIDS,
+ NL80211_TID_CONFIG_ATTR_NOACK,
+ NL80211_TID_CONFIG_ATTR_RETRY_SHORT,
+ NL80211_TID_CONFIG_ATTR_RETRY_LONG,
+ NL80211_TID_CONFIG_ATTR_AMPDU_CTRL,
+ NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL,
+ NL80211_TID_CONFIG_ATTR_AMSDU_CTRL,
+ NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE,
+ NL80211_TID_CONFIG_ATTR_TX_RATE,
+
+ /* keep last */
+ __NL80211_TID_CONFIG_ATTR_AFTER_LAST,
+ NL80211_TID_CONFIG_ATTR_MAX = __NL80211_TID_CONFIG_ATTR_AFTER_LAST - 1
+};
+
/**
* enum nl80211_packet_pattern_attr - packet pattern attribute
* @__NL80211_PKTPAT_INVALID: invalid number for nested attribute
* of supported channel widths for radar detection.
* @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap
* of supported regulatory regions for radar detection.
+ * @NL80211_IFACE_COMB_BI_MIN_GCD: u32 attribute specifying the minimum GCD of
+ * different beacon intervals supported by all the interface combinations
+ * in this group (if not present, all beacon intervals be identical).
* @NUM_NL80211_IFACE_COMB: number of attributes
* @MAX_NL80211_IFACE_COMB: highest attribute number
*
* limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2
* => allows an AP and a STA that must match BIs
*
- * numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8
- * => allows 8 of AP/GO
+ * numbers = [ #{AP, P2P-GO} <= 8 ], BI min gcd, channels = 1, max = 8,
+ * => allows 8 of AP/GO that can have BI gcd >= min gcd
*
* numbers = [ #{STA} <= 2 ], channels = 2, max = 2
* => allows two STAs on different channels
* numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4
* => allows a STA plus three P2P interfaces
*
- * The list of these four possiblities could completely be contained
+ * The list of these four possibilities could completely be contained
* within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate
* that any of these groups must match.
*
NL80211_IFACE_COMB_NUM_CHANNELS,
NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS,
NL80211_IFACE_COMB_RADAR_DETECT_REGIONS,
+ NL80211_IFACE_COMB_BI_MIN_GCD,
/* keep last */
NUM_NL80211_IFACE_COMB,
* enum nl80211_plink_state - state of a mesh peer link finite state machine
*
* @NL80211_PLINK_LISTEN: initial state, considered the implicit
- * state of non existant mesh peer links
+ * state of non existent mesh peer links
* @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to
* this mesh peer
* @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received
#define NL80211_KCK_LEN 16
#define NL80211_KEK_LEN 16
+#define NL80211_KCK_EXT_LEN 24
+#define NL80211_KEK_EXT_LEN 32
#define NL80211_REPLAY_CTR_LEN 8
/**
* @NL80211_REKEY_DATA_KEK: key encryption key (binary)
* @NL80211_REKEY_DATA_KCK: key confirmation key (binary)
* @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary)
+ * @NL80211_REKEY_DATA_AKM: AKM data (OUI, suite type)
* @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal)
* @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal)
*/
NL80211_REKEY_DATA_KEK,
NL80211_REKEY_DATA_KCK,
NL80211_REKEY_DATA_REPLAY_CTR,
+ NL80211_REKEY_DATA_AKM,
/* keep last */
NUM_NL80211_REKEY_DATA,
NL80211_FEATURE_TDLS_CHANNEL_SWITCH = 1 << 28,
NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR = 1 << 29,
NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR = 1 << 30,
- NL80211_FEATURE_ND_RANDOM_MAC_ADDR = 1 << 31,
+ NL80211_FEATURE_ND_RANDOM_MAC_ADDR = 1U << 31,
};
/**
* enum nl80211_ext_feature_index - bit index of extended features.
* @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates.
+ * @NL80211_EXT_FEATURE_RRM: This driver supports RRM. When featured, user can
+ * request to use RRM (see %NL80211_ATTR_USE_RRM) with
+ * %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set
+ * the ASSOC_REQ_USE_RRM flag in the association request even if
+ * NL80211_FEATURE_QUIET is not advertized.
+ * @NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER: This device supports MU-MIMO air
+ * sniffer which means that it can be configured to hear packets from
+ * certain groups which can be configured by the
+ * %NL80211_ATTR_MU_MIMO_GROUP_DATA attribute,
+ * or can be configured to follow a station by configuring the
+ * %NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR attribute.
+ * @NL80211_EXT_FEATURE_SCAN_START_TIME: This driver includes the actual
+ * time the scan started in scan results event. The time is the TSF of
+ * the BSS that the interface that requested the scan is connected to
+ * (if available).
+ * @NL80211_EXT_FEATURE_BSS_PARENT_TSF: Per BSS, this driver reports the
+ * time the last beacon/probe was received. The time is the TSF of the
+ * BSS that the interface that requested the scan is connected to
+ * (if available).
+ * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of
+ * channel dwell time.
+ * @NL80211_EXT_FEATURE_BEACON_RATE_LEGACY: Driver supports beacon rate
+ * configuration (AP/mesh), supporting a legacy (non HT/VHT) rate.
+ * @NL80211_EXT_FEATURE_BEACON_RATE_HT: Driver supports beacon rate
+ * configuration (AP/mesh) with HT rates.
+ * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate
+ * configuration (AP/mesh) with VHT rates.
+ * @NL80211_EXT_FEATURE_FILS_STA: This driver supports Fast Initial Link Setup
+ * with user space SME (NL80211_CMD_AUTHENTICATE) in station mode.
+ * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA: This driver supports randomized TA
+ * in @NL80211_CMD_FRAME while not associated.
+ * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED: This driver supports
+ * randomized TA in @NL80211_CMD_FRAME while associated.
+ * @NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI: The driver supports sched_scan
+ * for reporting BSSs with better RSSI than the current connected BSS
+ * (%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI).
+ * @NL80211_EXT_FEATURE_CQM_RSSI_LIST: With this driver the
+ * %NL80211_ATTR_CQM_RSSI_THOLD attribute accepts a list of zero or more
+ * RSSI threshold values to monitor rather than exactly one threshold.
+ * @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD: Driver SME supports FILS shared key
+ * authentication with %NL80211_CMD_CONNECT.
+ * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK: Device wants to do 4-way
+ * handshake with PSK in station mode (PSK is passed as part of the connect
+ * and associate commands), doing it in the host might not be supported.
+ * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X: Device wants to do doing 4-way
+ * handshake with 802.1X in station mode (will pass EAP frames to the host
+ * and accept the set_pmk/del_pmk commands), doing it in the host might not
+ * be supported.
+ * @NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME: Driver is capable of overriding
+ * the max channel attribute in the FILS request params IE with the
+ * actual dwell time.
+ * @NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP: Driver accepts broadcast probe
+ * response
+ * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE: Driver supports sending
+ * the first probe request in each channel at rate of at least 5.5Mbps.
+ * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: Driver supports
+ * probe request tx deferral and suppression
+ * @NL80211_EXT_FEATURE_MFP_OPTIONAL: Driver supports the %NL80211_MFP_OPTIONAL
+ * value in %NL80211_ATTR_USE_MFP.
+ * @NL80211_EXT_FEATURE_LOW_SPAN_SCAN: Driver supports low span scan.
+ * @NL80211_EXT_FEATURE_LOW_POWER_SCAN: Driver supports low power scan.
+ * @NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN: Driver supports high accuracy scan.
+ * @NL80211_EXT_FEATURE_DFS_OFFLOAD: HW/driver will offload DFS actions.
+ * Device or driver will do all DFS-related actions by itself,
+ * informing user-space about CAC progress, radar detection event,
+ * channel change triggered by radar detection event.
+ * No need to start CAC from user-space, no need to react to
+ * "radar detected" event.
+ * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211: Driver supports sending and
+ * receiving control port frames over nl80211 instead of the netdevice.
+ * @NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT: This driver/device supports
+ * (average) ACK signal strength reporting.
+ * @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate
+ * TXQs.
+ * @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the
+ * SN in probe request frames if requested by %NL80211_SCAN_FLAG_RANDOM_SN.
+ * @NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT: Driver/device can omit all data
+ * except for supported rates from the probe request content if requested
+ * by the %NL80211_SCAN_FLAG_MIN_PREQ_CONTENT flag.
+ * @NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER: Driver supports enabling fine
+ * timing measurement responder role.
+ *
+ * @NL80211_EXT_FEATURE_CAN_REPLACE_PTK0: Driver/device confirm that they are
+ * able to rekey an in-use key correctly. Userspace must not rekey PTK keys
+ * if this flag is not set. Ignoring this can leak clear text packets and/or
+ * freeze the connection.
+ * @NL80211_EXT_FEATURE_EXT_KEY_ID: Driver supports "Extended Key ID for
+ * Individually Addressed Frames" from IEEE802.11-2016.
+ *
+ * @NL80211_EXT_FEATURE_AIRTIME_FAIRNESS: Driver supports getting airtime
+ * fairness for transmitted packets and has enabled airtime fairness
+ * scheduling.
+ *
+ * @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching
+ * (set/del PMKSA operations) in AP mode.
+ *
+ * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Driver supports
+ * filtering of sched scan results using band specific RSSI thresholds.
+ *
+ * @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power
+ * to a station.
+ *
+ * @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in
+ * station mode (SAE password is passed as part of the connect command).
+ *
+ * @NL80211_EXT_FEATURE_VLAN_OFFLOAD: The driver supports a single netdev
+ * with VLAN tagged frames and separate VLAN-specific netdevs added using
+ * vconfig similarly to the Ethernet case.
+ *
+ * @NL80211_EXT_FEATURE_AQL: The driver supports the Airtime Queue Limit (AQL)
+ * feature, which prevents bufferbloat by using the expected transmission
+ * time to limit the amount of data buffered in the hardware.
+ *
+ * @NL80211_EXT_FEATURE_BEACON_PROTECTION: The driver supports Beacon protection
+ * and can receive key configuration for BIGTK using key indexes 6 and 7.
+ * @NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT: The driver supports Beacon
+ * protection as a client only and cannot transmit protected beacons.
+ *
+ * @NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH: The driver can disable the
+ * forwarding of preauth frames over the control port. They are then
+ * handled as ordinary data frames.
+ *
+ * @NL80211_EXT_FEATURE_PROTECTED_TWT: Driver supports protected TWT frames
+ *
+ * @NL80211_EXT_FEATURE_DEL_IBSS_STA: The driver supports removing stations
+ * in IBSS mode, essentially by dropping their state.
+ *
+ * @NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS: management frame registrations
+ * are possible for multicast frames and those will be reported properly.
+ *
+ * @NL80211_EXT_FEATURE_SCAN_FREQ_KHZ: This driver supports receiving and
+ * reporting scan request with %NL80211_ATTR_SCAN_FREQ_KHZ. In order to
+ * report %NL80211_ATTR_SCAN_FREQ_KHZ, %NL80211_SCAN_FLAG_FREQ_KHZ must be
+ * included in the scan request.
+ *
+ * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS: The driver
+ * can report tx status for control port over nl80211 tx operations.
+ *
+ * @NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION: Driver supports Operating
+ * Channel Validation (OCV) when using driver's SME for RSNA handshakes.
+ *
+ * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK: Device wants to do 4-way
+ * handshake with PSK in AP mode (PSK is passed as part of the start AP
+ * command).
+ *
+ * @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP: Device wants to do SAE authentication
+ * in AP mode (SAE password is passed as part of the start AP command).
+ *
+ * @NL80211_EXT_FEATURE_FILS_DISCOVERY: Driver/device supports FILS discovery
+ * frames transmission
+ *
+ * @NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP: Driver/device supports
+ * unsolicited broadcast probe response transmission
+ *
+ * @NL80211_EXT_FEATURE_BEACON_RATE_HE: Driver supports beacon rate
+ * configuration (AP/mesh) with HE rates.
+ *
+ * @NL80211_EXT_FEATURE_SECURE_LTF: Device supports secure LTF measurement
+ * exchange protocol.
+ *
+ * @NL80211_EXT_FEATURE_SECURE_RTT: Device supports secure RTT measurement
+ * exchange protocol.
+ *
+ * @NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE: Device supports management
+ * frame protection for all management frames exchanged during the
+ * negotiation and range measurement procedure.
+ *
+ * @NL80211_EXT_FEATURE_BSS_COLOR: The driver supports BSS color collision
+ * detection and change announcemnts.
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
*/
enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_VHT_IBSS,
+ NL80211_EXT_FEATURE_RRM,
+ NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER,
+ NL80211_EXT_FEATURE_SCAN_START_TIME,
+ NL80211_EXT_FEATURE_BSS_PARENT_TSF,
+ NL80211_EXT_FEATURE_SET_SCAN_DWELL,
+ NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
+ NL80211_EXT_FEATURE_BEACON_RATE_HT,
+ NL80211_EXT_FEATURE_BEACON_RATE_VHT,
+ NL80211_EXT_FEATURE_FILS_STA,
+ NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA,
+ NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED,
+ NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI,
+ NL80211_EXT_FEATURE_CQM_RSSI_LIST,
+ NL80211_EXT_FEATURE_FILS_SK_OFFLOAD,
+ NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK,
+ NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X,
+ NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME,
+ NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP,
+ NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE,
+ NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION,
+ NL80211_EXT_FEATURE_MFP_OPTIONAL,
+ NL80211_EXT_FEATURE_LOW_SPAN_SCAN,
+ NL80211_EXT_FEATURE_LOW_POWER_SCAN,
+ NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN,
+ NL80211_EXT_FEATURE_DFS_OFFLOAD,
+ NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211,
+ NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT,
+ /* we renamed this - stay compatible */
+ NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT = NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT,
+ NL80211_EXT_FEATURE_TXQS,
+ NL80211_EXT_FEATURE_SCAN_RANDOM_SN,
+ NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT,
+ NL80211_EXT_FEATURE_CAN_REPLACE_PTK0,
+ NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER,
+ NL80211_EXT_FEATURE_AIRTIME_FAIRNESS,
+ NL80211_EXT_FEATURE_AP_PMKSA_CACHING,
+ NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD,
+ NL80211_EXT_FEATURE_EXT_KEY_ID,
+ NL80211_EXT_FEATURE_STA_TX_PWR,
+ NL80211_EXT_FEATURE_SAE_OFFLOAD,
+ NL80211_EXT_FEATURE_VLAN_OFFLOAD,
+ NL80211_EXT_FEATURE_AQL,
+ NL80211_EXT_FEATURE_BEACON_PROTECTION,
+ NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH,
+ NL80211_EXT_FEATURE_PROTECTED_TWT,
+ NL80211_EXT_FEATURE_DEL_IBSS_STA,
+ NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS,
+ NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT,
+ NL80211_EXT_FEATURE_SCAN_FREQ_KHZ,
+ NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS,
+ NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION,
+ NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK,
+ NL80211_EXT_FEATURE_SAE_OFFLOAD_AP,
+ NL80211_EXT_FEATURE_FILS_DISCOVERY,
+ NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP,
+ NL80211_EXT_FEATURE_BEACON_RATE_HE,
+ NL80211_EXT_FEATURE_SECURE_LTF,
+ NL80211_EXT_FEATURE_SECURE_RTT,
+ NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE,
+ NL80211_EXT_FEATURE_BSS_COLOR,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
NL80211_CONN_FAIL_BLOCKED_CLIENT,
};
+/**
+ * enum nl80211_timeout_reason - timeout reasons
+ *
+ * @NL80211_TIMEOUT_UNSPECIFIED: Timeout reason unspecified.
+ * @NL80211_TIMEOUT_SCAN: Scan (AP discovery) timed out.
+ * @NL80211_TIMEOUT_AUTH: Authentication timed out.
+ * @NL80211_TIMEOUT_ASSOC: Association timed out.
+ */
+enum nl80211_timeout_reason {
+ NL80211_TIMEOUT_UNSPECIFIED,
+ NL80211_TIMEOUT_SCAN,
+ NL80211_TIMEOUT_AUTH,
+ NL80211_TIMEOUT_ASSOC,
+};
+
/**
* enum nl80211_scan_flags - scan request control flags
*
* of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN
* requests.
*
+ * NL80211_SCAN_FLAG_LOW_SPAN, NL80211_SCAN_FLAG_LOW_POWER, and
+ * NL80211_SCAN_FLAG_HIGH_ACCURACY flags are exclusive of each other, i.e., only
+ * one of them can be used in the request.
+ *
* @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority
* @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning
* @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured
* locally administered 1, multicast 0) is assumed.
* This flag must not be requested when the feature isn't supported, check
* the nl80211 feature flags for the device.
+ * @NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME: fill the dwell time in the FILS
+ * request parameters IE in the probe request
+ * @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses
+ * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at
+ * rate of at least 5.5M. In case non OCE AP is discovered in the channel,
+ * only the first probe req in the channel will be sent in high rate.
+ * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request
+ * tx deferral (dot11FILSProbeDelay shall be set to 15ms)
+ * and suppression (if it has received a broadcast Probe Response frame,
+ * Beacon frame or FILS Discovery frame from an AP that the STA considers
+ * a suitable candidate for (re-)association - suitable in terms of
+ * SSID and/or RSSI.
+ * @NL80211_SCAN_FLAG_LOW_SPAN: Span corresponds to the total time taken to
+ * accomplish the scan. Thus, this flag intends the driver to perform the
+ * scan request with lesser span/duration. It is specific to the driver
+ * implementations on how this is accomplished. Scan accuracy may get
+ * impacted with this flag.
+ * @NL80211_SCAN_FLAG_LOW_POWER: This flag intends the scan attempts to consume
+ * optimal possible power. Drivers can resort to their specific means to
+ * optimize the power. Scan accuracy may get impacted with this flag.
+ * @NL80211_SCAN_FLAG_HIGH_ACCURACY: Accuracy here intends to the extent of scan
+ * results obtained. Thus HIGH_ACCURACY scan flag aims to get maximum
+ * possible scan results. This flag hints the driver to use the best
+ * possible scan configuration to improve the accuracy in scanning.
+ * Latency and power use may get impacted with this flag.
+ * @NL80211_SCAN_FLAG_RANDOM_SN: randomize the sequence number in probe
+ * request frames from this scan to avoid correlation/tracking being
+ * possible.
+ * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to
+ * only have supported rates and no additional capabilities (unless
+ * added by userspace explicitly.)
+ * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with
+ * %NL80211_ATTR_SCAN_FREQ_KHZ. This also means
+ * %NL80211_ATTR_SCAN_FREQUENCIES will not be included.
+ * @NL80211_SCAN_FLAG_COLOCATED_6GHZ: scan for colocated APs reported by
+ * 2.4/5 GHz APs
*/
enum nl80211_scan_flags {
- NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0,
- NL80211_SCAN_FLAG_FLUSH = 1<<1,
- NL80211_SCAN_FLAG_AP = 1<<2,
- NL80211_SCAN_FLAG_RANDOM_ADDR = 1<<3,
+ NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0,
+ NL80211_SCAN_FLAG_FLUSH = 1<<1,
+ NL80211_SCAN_FLAG_AP = 1<<2,
+ NL80211_SCAN_FLAG_RANDOM_ADDR = 1<<3,
+ NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME = 1<<4,
+ NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP = 1<<5,
+ NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE = 1<<6,
+ NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION = 1<<7,
+ NL80211_SCAN_FLAG_LOW_SPAN = 1<<8,
+ NL80211_SCAN_FLAG_LOW_POWER = 1<<9,
+ NL80211_SCAN_FLAG_HIGH_ACCURACY = 1<<10,
+ NL80211_SCAN_FLAG_RANDOM_SN = 1<<11,
+ NL80211_SCAN_FLAG_MIN_PREQ_CONTENT = 1<<12,
+ NL80211_SCAN_FLAG_FREQ_KHZ = 1<<13,
+ NL80211_SCAN_FLAG_COLOCATED_6GHZ = 1<<14,
};
/**
* change to the channel status.
* @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is
* over, channel becomes usable.
+ * @NL80211_RADAR_PRE_CAC_EXPIRED: Channel Availability Check done on this
+ * non-operating channel is expired and no longer valid. New CAC must
+ * be done on this channel before starting the operation. This is not
+ * applicable for ETSI dfs domain where pre-CAC is valid for ever.
+ * @NL80211_RADAR_CAC_STARTED: Channel Availability Check has been started,
+ * should be generated by HW if NL80211_EXT_FEATURE_DFS_OFFLOAD is enabled.
*/
enum nl80211_radar_event {
NL80211_RADAR_DETECTED,
NL80211_RADAR_CAC_FINISHED,
NL80211_RADAR_CAC_ABORTED,
NL80211_RADAR_NOP_FINISHED,
+ NL80211_RADAR_PRE_CAC_EXPIRED,
+ NL80211_RADAR_CAC_STARTED,
};
/**
};
/**
- * enum enum nl80211_protocol_features - nl80211 protocol features
+ * enum nl80211_protocol_features - nl80211 protocol features
* @NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP: nl80211 supports splitting
* wiphy dumps (if requested by the application with the attribute
* %NL80211_ATTR_SPLIT_WIPHY_DUMP. Also supported is filtering the
* Used by cfg80211_rx_mgmt()
*
* @NL80211_RXMGMT_FLAG_ANSWERED: frame was answered by device/driver.
+ * @NL80211_RXMGMT_FLAG_EXTERNAL_AUTH: Host driver intends to offload
+ * the authentication. Exclusively defined for host drivers that
+ * advertises the SME functionality but would like the userspace
+ * to handle certain authentication algorithms (e.g. SAE).
*/
enum nl80211_rxmgmt_flags {
NL80211_RXMGMT_FLAG_ANSWERED = 1 << 0,
+ NL80211_RXMGMT_FLAG_EXTERNAL_AUTH = 1 << 1,
};
/*
* @NL80211_TDLS_PEER_HT: TDLS peer is HT capable.
* @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable.
* @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable.
+ * @NL80211_TDLS_PEER_HE: TDLS peer is HE capable.
*/
enum nl80211_tdls_peer_capability {
NL80211_TDLS_PEER_HT = 1<<0,
NL80211_TDLS_PEER_VHT = 1<<1,
NL80211_TDLS_PEER_WMM = 1<<2,
+ NL80211_TDLS_PEER_HE = 1<<3,
};
/**
__NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1
};
+/**
+ * struct nl80211_bss_select_rssi_adjust - RSSI adjustment parameters.
+ *
+ * @band: band of BSS that must match for RSSI value adjustment. The value
+ * of this field is according to &enum nl80211_band.
+ * @delta: value used to adjust the RSSI value of matching BSS in dB.
+ */
+struct nl80211_bss_select_rssi_adjust {
+ __u8 band;
+ __s8 delta;
+} __attribute__((packed));
+
+/**
+ * enum nl80211_bss_select_attr - attributes for bss selection.
+ *
+ * @__NL80211_BSS_SELECT_ATTR_INVALID: reserved.
+ * @NL80211_BSS_SELECT_ATTR_RSSI: Flag indicating only RSSI-based BSS selection
+ * is requested.
+ * @NL80211_BSS_SELECT_ATTR_BAND_PREF: attribute indicating BSS
+ * selection should be done such that the specified band is preferred.
+ * When there are multiple BSS-es in the preferred band, the driver
+ * shall use RSSI-based BSS selection as a second step. The value of
+ * this attribute is according to &enum nl80211_band (u32).
+ * @NL80211_BSS_SELECT_ATTR_RSSI_ADJUST: When present the RSSI level for
+ * BSS-es in the specified band is to be adjusted before doing
+ * RSSI-based BSS selection. The attribute value is a packed structure
+ * value as specified by &struct nl80211_bss_select_rssi_adjust.
+ * @NL80211_BSS_SELECT_ATTR_MAX: highest bss select attribute number.
+ * @__NL80211_BSS_SELECT_ATTR_AFTER_LAST: internal use.
+ *
+ * One and only one of these attributes are found within %NL80211_ATTR_BSS_SELECT
+ * for %NL80211_CMD_CONNECT. It specifies the required BSS selection behaviour
+ * which the driver shall use.
+ */
+enum nl80211_bss_select_attr {
+ __NL80211_BSS_SELECT_ATTR_INVALID,
+ NL80211_BSS_SELECT_ATTR_RSSI,
+ NL80211_BSS_SELECT_ATTR_BAND_PREF,
+ NL80211_BSS_SELECT_ATTR_RSSI_ADJUST,
+
+ /* keep last */
+ __NL80211_BSS_SELECT_ATTR_AFTER_LAST,
+ NL80211_BSS_SELECT_ATTR_MAX = __NL80211_BSS_SELECT_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_nan_function_type - NAN function type
+ *
+ * Defines the function type of a NAN function
+ *
+ * @NL80211_NAN_FUNC_PUBLISH: function is publish
+ * @NL80211_NAN_FUNC_SUBSCRIBE: function is subscribe
+ * @NL80211_NAN_FUNC_FOLLOW_UP: function is follow-up
+ */
+enum nl80211_nan_function_type {
+ NL80211_NAN_FUNC_PUBLISH,
+ NL80211_NAN_FUNC_SUBSCRIBE,
+ NL80211_NAN_FUNC_FOLLOW_UP,
+
+ /* keep last */
+ __NL80211_NAN_FUNC_TYPE_AFTER_LAST,
+ NL80211_NAN_FUNC_MAX_TYPE = __NL80211_NAN_FUNC_TYPE_AFTER_LAST - 1,
+};
+
+/**
+ * enum nl80211_nan_publish_type - NAN publish tx type
+ *
+ * Defines how to send publish Service Discovery Frames
+ *
+ * @NL80211_NAN_SOLICITED_PUBLISH: publish function is solicited
+ * @NL80211_NAN_UNSOLICITED_PUBLISH: publish function is unsolicited
+ */
+enum nl80211_nan_publish_type {
+ NL80211_NAN_SOLICITED_PUBLISH = 1 << 0,
+ NL80211_NAN_UNSOLICITED_PUBLISH = 1 << 1,
+};
+
+/**
+ * enum nl80211_nan_func_term_reason - NAN functions termination reason
+ *
+ * Defines termination reasons of a NAN function
+ *
+ * @NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST: requested by user
+ * @NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED: timeout
+ * @NL80211_NAN_FUNC_TERM_REASON_ERROR: errored
+ */
+enum nl80211_nan_func_term_reason {
+ NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST,
+ NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED,
+ NL80211_NAN_FUNC_TERM_REASON_ERROR,
+};
+
+#define NL80211_NAN_FUNC_SERVICE_ID_LEN 6
+#define NL80211_NAN_FUNC_SERVICE_SPEC_INFO_MAX_LEN 0xff
+#define NL80211_NAN_FUNC_SRF_MAX_LEN 0xff
+
+/**
+ * enum nl80211_nan_func_attributes - NAN function attributes
+ * @__NL80211_NAN_FUNC_INVALID: invalid
+ * @NL80211_NAN_FUNC_TYPE: &enum nl80211_nan_function_type (u8).
+ * @NL80211_NAN_FUNC_SERVICE_ID: 6 bytes of the service ID hash as
+ * specified in NAN spec. This is a binary attribute.
+ * @NL80211_NAN_FUNC_PUBLISH_TYPE: relevant if the function's type is
+ * publish. Defines the transmission type for the publish Service Discovery
+ * Frame, see &enum nl80211_nan_publish_type. Its type is u8.
+ * @NL80211_NAN_FUNC_PUBLISH_BCAST: relevant if the function is a solicited
+ * publish. Should the solicited publish Service Discovery Frame be sent to
+ * the NAN Broadcast address. This is a flag.
+ * @NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE: relevant if the function's type is
+ * subscribe. Is the subscribe active. This is a flag.
+ * @NL80211_NAN_FUNC_FOLLOW_UP_ID: relevant if the function's type is follow up.
+ * The instance ID for the follow up Service Discovery Frame. This is u8.
+ * @NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID: relevant if the function's type
+ * is follow up. This is a u8.
+ * The requestor instance ID for the follow up Service Discovery Frame.
+ * @NL80211_NAN_FUNC_FOLLOW_UP_DEST: the MAC address of the recipient of the
+ * follow up Service Discovery Frame. This is a binary attribute.
+ * @NL80211_NAN_FUNC_CLOSE_RANGE: is this function limited for devices in a
+ * close range. The range itself (RSSI) is defined by the device.
+ * This is a flag.
+ * @NL80211_NAN_FUNC_TTL: strictly positive number of DWs this function should
+ * stay active. If not present infinite TTL is assumed. This is a u32.
+ * @NL80211_NAN_FUNC_SERVICE_INFO: array of bytes describing the service
+ * specific info. This is a binary attribute.
+ * @NL80211_NAN_FUNC_SRF: Service Receive Filter. This is a nested attribute.
+ * See &enum nl80211_nan_srf_attributes.
+ * @NL80211_NAN_FUNC_RX_MATCH_FILTER: Receive Matching filter. This is a nested
+ * attribute. It is a list of binary values.
+ * @NL80211_NAN_FUNC_TX_MATCH_FILTER: Transmit Matching filter. This is a
+ * nested attribute. It is a list of binary values.
+ * @NL80211_NAN_FUNC_INSTANCE_ID: The instance ID of the function.
+ * Its type is u8 and it cannot be 0.
+ * @NL80211_NAN_FUNC_TERM_REASON: NAN function termination reason.
+ * See &enum nl80211_nan_func_term_reason.
+ *
+ * @NUM_NL80211_NAN_FUNC_ATTR: internal
+ * @NL80211_NAN_FUNC_ATTR_MAX: highest NAN function attribute
+ */
+enum nl80211_nan_func_attributes {
+ __NL80211_NAN_FUNC_INVALID,
+ NL80211_NAN_FUNC_TYPE,
+ NL80211_NAN_FUNC_SERVICE_ID,
+ NL80211_NAN_FUNC_PUBLISH_TYPE,
+ NL80211_NAN_FUNC_PUBLISH_BCAST,
+ NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE,
+ NL80211_NAN_FUNC_FOLLOW_UP_ID,
+ NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID,
+ NL80211_NAN_FUNC_FOLLOW_UP_DEST,
+ NL80211_NAN_FUNC_CLOSE_RANGE,
+ NL80211_NAN_FUNC_TTL,
+ NL80211_NAN_FUNC_SERVICE_INFO,
+ NL80211_NAN_FUNC_SRF,
+ NL80211_NAN_FUNC_RX_MATCH_FILTER,
+ NL80211_NAN_FUNC_TX_MATCH_FILTER,
+ NL80211_NAN_FUNC_INSTANCE_ID,
+ NL80211_NAN_FUNC_TERM_REASON,
+
+ /* keep last */
+ NUM_NL80211_NAN_FUNC_ATTR,
+ NL80211_NAN_FUNC_ATTR_MAX = NUM_NL80211_NAN_FUNC_ATTR - 1
+};
+
+/**
+ * enum nl80211_nan_srf_attributes - NAN Service Response filter attributes
+ * @__NL80211_NAN_SRF_INVALID: invalid
+ * @NL80211_NAN_SRF_INCLUDE: present if the include bit of the SRF set.
+ * This is a flag.
+ * @NL80211_NAN_SRF_BF: Bloom Filter. Present if and only if
+ * %NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary.
+ * @NL80211_NAN_SRF_BF_IDX: index of the Bloom Filter. Mandatory if
+ * %NL80211_NAN_SRF_BF is present. This is a u8.
+ * @NL80211_NAN_SRF_MAC_ADDRS: list of MAC addresses for the SRF. Present if
+ * and only if %NL80211_NAN_SRF_BF isn't present. This is a nested
+ * attribute. Each nested attribute is a MAC address.
+ * @NUM_NL80211_NAN_SRF_ATTR: internal
+ * @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute
+ */
+enum nl80211_nan_srf_attributes {
+ __NL80211_NAN_SRF_INVALID,
+ NL80211_NAN_SRF_INCLUDE,
+ NL80211_NAN_SRF_BF,
+ NL80211_NAN_SRF_BF_IDX,
+ NL80211_NAN_SRF_MAC_ADDRS,
+
+ /* keep last */
+ NUM_NL80211_NAN_SRF_ATTR,
+ NL80211_NAN_SRF_ATTR_MAX = NUM_NL80211_NAN_SRF_ATTR - 1,
+};
+
+/**
+ * enum nl80211_nan_match_attributes - NAN match attributes
+ * @__NL80211_NAN_MATCH_INVALID: invalid
+ * @NL80211_NAN_MATCH_FUNC_LOCAL: the local function that had the
+ * match. This is a nested attribute.
+ * See &enum nl80211_nan_func_attributes.
+ * @NL80211_NAN_MATCH_FUNC_PEER: the peer function
+ * that caused the match. This is a nested attribute.
+ * See &enum nl80211_nan_func_attributes.
+ *
+ * @NUM_NL80211_NAN_MATCH_ATTR: internal
+ * @NL80211_NAN_MATCH_ATTR_MAX: highest NAN match attribute
+ */
+enum nl80211_nan_match_attributes {
+ __NL80211_NAN_MATCH_INVALID,
+ NL80211_NAN_MATCH_FUNC_LOCAL,
+ NL80211_NAN_MATCH_FUNC_PEER,
+
+ /* keep last */
+ NUM_NL80211_NAN_MATCH_ATTR,
+ NL80211_NAN_MATCH_ATTR_MAX = NUM_NL80211_NAN_MATCH_ATTR - 1
+};
+
+/**
+ * nl80211_external_auth_action - Action to perform with external
+ * authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION.
+ * @NL80211_EXTERNAL_AUTH_START: Start the authentication.
+ * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication.
+ */
+enum nl80211_external_auth_action {
+ NL80211_EXTERNAL_AUTH_START,
+ NL80211_EXTERNAL_AUTH_ABORT,
+};
+
+/**
+ * enum nl80211_ftm_responder_attributes - fine timing measurement
+ * responder attributes
+ * @__NL80211_FTM_RESP_ATTR_INVALID: Invalid
+ * @NL80211_FTM_RESP_ATTR_ENABLED: FTM responder is enabled
+ * @NL80211_FTM_RESP_ATTR_LCI: The content of Measurement Report Element
+ * (9.4.2.22 in 802.11-2016) with type 8 - LCI (9.4.2.22.10),
+ * i.e. starting with the measurement token
+ * @NL80211_FTM_RESP_ATTR_CIVIC: The content of Measurement Report Element
+ * (9.4.2.22 in 802.11-2016) with type 11 - Civic (Section 9.4.2.22.13),
+ * i.e. starting with the measurement token
+ * @__NL80211_FTM_RESP_ATTR_LAST: Internal
+ * @NL80211_FTM_RESP_ATTR_MAX: highest FTM responder attribute.
+ */
+enum nl80211_ftm_responder_attributes {
+ __NL80211_FTM_RESP_ATTR_INVALID,
+
+ NL80211_FTM_RESP_ATTR_ENABLED,
+ NL80211_FTM_RESP_ATTR_LCI,
+ NL80211_FTM_RESP_ATTR_CIVICLOC,
+
+ /* keep last */
+ __NL80211_FTM_RESP_ATTR_LAST,
+ NL80211_FTM_RESP_ATTR_MAX = __NL80211_FTM_RESP_ATTR_LAST - 1,
+};
+
+/*
+ * enum nl80211_ftm_responder_stats - FTM responder statistics
+ *
+ * These attribute types are used with %NL80211_ATTR_FTM_RESPONDER_STATS
+ * when getting FTM responder statistics.
+ *
+ * @__NL80211_FTM_STATS_INVALID: attribute number 0 is reserved
+ * @NL80211_FTM_STATS_SUCCESS_NUM: number of FTM sessions in which all frames
+ * were ssfully answered (u32)
+ * @NL80211_FTM_STATS_PARTIAL_NUM: number of FTM sessions in which part of the
+ * frames were successfully answered (u32)
+ * @NL80211_FTM_STATS_FAILED_NUM: number of failed FTM sessions (u32)
+ * @NL80211_FTM_STATS_ASAP_NUM: number of ASAP sessions (u32)
+ * @NL80211_FTM_STATS_NON_ASAP_NUM: number of non-ASAP sessions (u32)
+ * @NL80211_FTM_STATS_TOTAL_DURATION_MSEC: total sessions durations - gives an
+ * indication of how much time the responder was busy (u64, msec)
+ * @NL80211_FTM_STATS_UNKNOWN_TRIGGERS_NUM: number of unknown FTM triggers -
+ * triggers from initiators that didn't finish successfully the negotiation
+ * phase with the responder (u32)
+ * @NL80211_FTM_STATS_RESCHEDULE_REQUESTS_NUM: number of FTM reschedule requests
+ * - initiator asks for a new scheduling although it already has scheduled
+ * FTM slot (u32)
+ * @NL80211_FTM_STATS_OUT_OF_WINDOW_TRIGGERS_NUM: number of FTM triggers out of
+ * scheduled window (u32)
+ * @NL80211_FTM_STATS_PAD: used for padding, ignore
+ * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal
+ * @NL80211_FTM_STATS_MAX: highest possible FTM responder stats attribute
+ */
+enum nl80211_ftm_responder_stats {
+ __NL80211_FTM_STATS_INVALID,
+ NL80211_FTM_STATS_SUCCESS_NUM,
+ NL80211_FTM_STATS_PARTIAL_NUM,
+ NL80211_FTM_STATS_FAILED_NUM,
+ NL80211_FTM_STATS_ASAP_NUM,
+ NL80211_FTM_STATS_NON_ASAP_NUM,
+ NL80211_FTM_STATS_TOTAL_DURATION_MSEC,
+ NL80211_FTM_STATS_UNKNOWN_TRIGGERS_NUM,
+ NL80211_FTM_STATS_RESCHEDULE_REQUESTS_NUM,
+ NL80211_FTM_STATS_OUT_OF_WINDOW_TRIGGERS_NUM,
+ NL80211_FTM_STATS_PAD,
+
+ /* keep last */
+ __NL80211_FTM_STATS_AFTER_LAST,
+ NL80211_FTM_STATS_MAX = __NL80211_FTM_STATS_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_preamble - frame preamble types
+ * @NL80211_PREAMBLE_LEGACY: legacy (HR/DSSS, OFDM, ERP PHY) preamble
+ * @NL80211_PREAMBLE_HT: HT preamble
+ * @NL80211_PREAMBLE_VHT: VHT preamble
+ * @NL80211_PREAMBLE_DMG: DMG preamble
+ * @NL80211_PREAMBLE_HE: HE preamble
+ */
+enum nl80211_preamble {
+ NL80211_PREAMBLE_LEGACY,
+ NL80211_PREAMBLE_HT,
+ NL80211_PREAMBLE_VHT,
+ NL80211_PREAMBLE_DMG,
+ NL80211_PREAMBLE_HE,
+};
+
+/**
+ * enum nl80211_peer_measurement_type - peer measurement types
+ * @NL80211_PMSR_TYPE_INVALID: invalid/unused, needed as we use
+ * these numbers also for attributes
+ *
+ * @NL80211_PMSR_TYPE_FTM: flight time measurement
+ *
+ * @NUM_NL80211_PMSR_TYPES: internal
+ * @NL80211_PMSR_TYPE_MAX: highest type number
+ */
+enum nl80211_peer_measurement_type {
+ NL80211_PMSR_TYPE_INVALID,
+
+ NL80211_PMSR_TYPE_FTM,
+
+ NUM_NL80211_PMSR_TYPES,
+ NL80211_PMSR_TYPE_MAX = NUM_NL80211_PMSR_TYPES - 1
+};
+
+/**
+ * enum nl80211_peer_measurement_status - peer measurement status
+ * @NL80211_PMSR_STATUS_SUCCESS: measurement completed successfully
+ * @NL80211_PMSR_STATUS_REFUSED: measurement was locally refused
+ * @NL80211_PMSR_STATUS_TIMEOUT: measurement timed out
+ * @NL80211_PMSR_STATUS_FAILURE: measurement failed, a type-dependent
+ * reason may be available in the response data
+ */
+enum nl80211_peer_measurement_status {
+ NL80211_PMSR_STATUS_SUCCESS,
+ NL80211_PMSR_STATUS_REFUSED,
+ NL80211_PMSR_STATUS_TIMEOUT,
+ NL80211_PMSR_STATUS_FAILURE,
+};
+
+/**
+ * enum nl80211_peer_measurement_req - peer measurement request attributes
+ * @__NL80211_PMSR_REQ_ATTR_INVALID: invalid
+ *
+ * @NL80211_PMSR_REQ_ATTR_DATA: This is a nested attribute with measurement
+ * type-specific request data inside. The attributes used are from the
+ * enums named nl80211_peer_measurement_<type>_req.
+ * @NL80211_PMSR_REQ_ATTR_GET_AP_TSF: include AP TSF timestamp, if supported
+ * (flag attribute)
+ *
+ * @NUM_NL80211_PMSR_REQ_ATTRS: internal
+ * @NL80211_PMSR_REQ_ATTR_MAX: highest attribute number
+ */
+enum nl80211_peer_measurement_req {
+ __NL80211_PMSR_REQ_ATTR_INVALID,
+
+ NL80211_PMSR_REQ_ATTR_DATA,
+ NL80211_PMSR_REQ_ATTR_GET_AP_TSF,
+
+ /* keep last */
+ NUM_NL80211_PMSR_REQ_ATTRS,
+ NL80211_PMSR_REQ_ATTR_MAX = NUM_NL80211_PMSR_REQ_ATTRS - 1
+};
+
+/**
+ * enum nl80211_peer_measurement_resp - peer measurement response attributes
+ * @__NL80211_PMSR_RESP_ATTR_INVALID: invalid
+ *
+ * @NL80211_PMSR_RESP_ATTR_DATA: This is a nested attribute with measurement
+ * type-specific results inside. The attributes used are from the enums
+ * named nl80211_peer_measurement_<type>_resp.
+ * @NL80211_PMSR_RESP_ATTR_STATUS: u32 value with the measurement status
+ * (using values from &enum nl80211_peer_measurement_status.)
+ * @NL80211_PMSR_RESP_ATTR_HOST_TIME: host time (%CLOCK_BOOTTIME) when the
+ * result was measured; this value is not expected to be accurate to
+ * more than 20ms. (u64, nanoseconds)
+ * @NL80211_PMSR_RESP_ATTR_AP_TSF: TSF of the AP that the interface
+ * doing the measurement is connected to when the result was measured.
+ * This shall be accurately reported if supported and requested
+ * (u64, usec)
+ * @NL80211_PMSR_RESP_ATTR_FINAL: If results are sent to the host partially
+ * (*e.g. with FTM per-burst data) this flag will be cleared on all but
+ * the last result; if all results are combined it's set on the single
+ * result.
+ * @NL80211_PMSR_RESP_ATTR_PAD: padding for 64-bit attributes, ignore
+ *
+ * @NUM_NL80211_PMSR_RESP_ATTRS: internal
+ * @NL80211_PMSR_RESP_ATTR_MAX: highest attribute number
+ */
+enum nl80211_peer_measurement_resp {
+ __NL80211_PMSR_RESP_ATTR_INVALID,
+
+ NL80211_PMSR_RESP_ATTR_DATA,
+ NL80211_PMSR_RESP_ATTR_STATUS,
+ NL80211_PMSR_RESP_ATTR_HOST_TIME,
+ NL80211_PMSR_RESP_ATTR_AP_TSF,
+ NL80211_PMSR_RESP_ATTR_FINAL,
+ NL80211_PMSR_RESP_ATTR_PAD,
+
+ /* keep last */
+ NUM_NL80211_PMSR_RESP_ATTRS,
+ NL80211_PMSR_RESP_ATTR_MAX = NUM_NL80211_PMSR_RESP_ATTRS - 1
+};
+
+/**
+ * enum nl80211_peer_measurement_peer_attrs - peer attributes for measurement
+ * @__NL80211_PMSR_PEER_ATTR_INVALID: invalid
+ *
+ * @NL80211_PMSR_PEER_ATTR_ADDR: peer's MAC address
+ * @NL80211_PMSR_PEER_ATTR_CHAN: channel definition, nested, using top-level
+ * attributes like %NL80211_ATTR_WIPHY_FREQ etc.
+ * @NL80211_PMSR_PEER_ATTR_REQ: This is a nested attribute indexed by
+ * measurement type, with attributes from the
+ * &enum nl80211_peer_measurement_req inside.
+ * @NL80211_PMSR_PEER_ATTR_RESP: This is a nested attribute indexed by
+ * measurement type, with attributes from the
+ * &enum nl80211_peer_measurement_resp inside.
+ *
+ * @NUM_NL80211_PMSR_PEER_ATTRS: internal
+ * @NL80211_PMSR_PEER_ATTR_MAX: highest attribute number
+ */
+enum nl80211_peer_measurement_peer_attrs {
+ __NL80211_PMSR_PEER_ATTR_INVALID,
+
+ NL80211_PMSR_PEER_ATTR_ADDR,
+ NL80211_PMSR_PEER_ATTR_CHAN,
+ NL80211_PMSR_PEER_ATTR_REQ,
+ NL80211_PMSR_PEER_ATTR_RESP,
+
+ /* keep last */
+ NUM_NL80211_PMSR_PEER_ATTRS,
+ NL80211_PMSR_PEER_ATTR_MAX = NUM_NL80211_PMSR_PEER_ATTRS - 1,
+};
+
+/**
+ * enum nl80211_peer_measurement_attrs - peer measurement attributes
+ * @__NL80211_PMSR_ATTR_INVALID: invalid
+ *
+ * @NL80211_PMSR_ATTR_MAX_PEERS: u32 attribute used for capability
+ * advertisement only, indicates the maximum number of peers
+ * measurements can be done with in a single request
+ * @NL80211_PMSR_ATTR_REPORT_AP_TSF: flag attribute in capability
+ * indicating that the connected AP's TSF can be reported in
+ * measurement results
+ * @NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR: flag attribute in capability
+ * indicating that MAC address randomization is supported.
+ * @NL80211_PMSR_ATTR_TYPE_CAPA: capabilities reported by the device,
+ * this contains a nesting indexed by measurement type, and
+ * type-specific capabilities inside, which are from the enums
+ * named nl80211_peer_measurement_<type>_capa.
+ * @NL80211_PMSR_ATTR_PEERS: nested attribute, the nesting index is
+ * meaningless, just a list of peers to measure with, with the
+ * sub-attributes taken from
+ * &enum nl80211_peer_measurement_peer_attrs.
+ *
+ * @NUM_NL80211_PMSR_ATTR: internal
+ * @NL80211_PMSR_ATTR_MAX: highest attribute number
+ */
+enum nl80211_peer_measurement_attrs {
+ __NL80211_PMSR_ATTR_INVALID,
+
+ NL80211_PMSR_ATTR_MAX_PEERS,
+ NL80211_PMSR_ATTR_REPORT_AP_TSF,
+ NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR,
+ NL80211_PMSR_ATTR_TYPE_CAPA,
+ NL80211_PMSR_ATTR_PEERS,
+
+ /* keep last */
+ NUM_NL80211_PMSR_ATTR,
+ NL80211_PMSR_ATTR_MAX = NUM_NL80211_PMSR_ATTR - 1
+};
+
+/**
+ * enum nl80211_peer_measurement_ftm_capa - FTM capabilities
+ * @__NL80211_PMSR_FTM_CAPA_ATTR_INVALID: invalid
+ *
+ * @NL80211_PMSR_FTM_CAPA_ATTR_ASAP: flag attribute indicating ASAP mode
+ * is supported
+ * @NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP: flag attribute indicating non-ASAP
+ * mode is supported
+ * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI: flag attribute indicating if LCI
+ * data can be requested during the measurement
+ * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC: flag attribute indicating if civic
+ * location data can be requested during the measurement
+ * @NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES: u32 bitmap attribute of bits
+ * from &enum nl80211_preamble.
+ * @NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS: bitmap of values from
+ * &enum nl80211_chan_width indicating the supported channel
+ * bandwidths for FTM. Note that a higher channel bandwidth may be
+ * configured to allow for other measurements types with different
+ * bandwidth requirement in the same measurement.
+ * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT: u32 attribute indicating
+ * the maximum bursts exponent that can be used (if not present anything
+ * is valid)
+ * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST: u32 attribute indicating
+ * the maximum FTMs per burst (if not present anything is valid)
+ * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if
+ * trigger based ranging measurement is supported
+ * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating
+ * if non trigger based ranging measurement is supported
+ *
+ * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal
+ * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number
+ */
+enum nl80211_peer_measurement_ftm_capa {
+ __NL80211_PMSR_FTM_CAPA_ATTR_INVALID,
+
+ NL80211_PMSR_FTM_CAPA_ATTR_ASAP,
+ NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP,
+ NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI,
+ NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC,
+ NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES,
+ NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS,
+ NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT,
+ NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST,
+ NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED,
+ NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED,
+
+ /* keep last */
+ NUM_NL80211_PMSR_FTM_CAPA_ATTR,
+ NL80211_PMSR_FTM_CAPA_ATTR_MAX = NUM_NL80211_PMSR_FTM_CAPA_ATTR - 1
+};
+
+/**
+ * enum nl80211_peer_measurement_ftm_req - FTM request attributes
+ * @__NL80211_PMSR_FTM_REQ_ATTR_INVALID: invalid
+ *
+ * @NL80211_PMSR_FTM_REQ_ATTR_ASAP: ASAP mode requested (flag)
+ * @NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE: preamble type (see
+ * &enum nl80211_preamble), optional for DMG (u32)
+ * @NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP: number of bursts exponent as in
+ * 802.11-2016 9.4.2.168 "Fine Timing Measurement Parameters element"
+ * (u8, 0-15, optional with default 15 i.e. "no preference")
+ * @NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD: interval between bursts in units
+ * of 100ms (u16, optional with default 0)
+ * @NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION: burst duration, as in 802.11-2016
+ * Table 9-257 "Burst Duration field encoding" (u8, 0-15, optional with
+ * default 15 i.e. "no preference")
+ * @NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST: number of successful FTM frames
+ * requested per burst
+ * (u8, 0-31, optional with default 0 i.e. "no preference")
+ * @NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES: number of FTMR frame retries
+ * (u8, default 3)
+ * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI: request LCI data (flag)
+ * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC: request civic location data
+ * (flag)
+ * @NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED: request trigger based ranging
+ * measurement (flag).
+ * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED are
+ * mutually exclusive.
+ * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
+ * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
+ * ranging will be used.
+ * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non trigger based
+ * ranging measurement (flag)
+ * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are
+ * mutually exclusive.
+ * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
+ * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
+ * ranging will be used.
+ * @NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK: negotiate for LMR feedback. Only
+ * valid if either %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED or
+ * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set.
+ * @NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR: optional. The BSS color of the
+ * responder. Only valid if %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED
+ * or %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED is set.
+ *
+ * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal
+ * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number
+ */
+enum nl80211_peer_measurement_ftm_req {
+ __NL80211_PMSR_FTM_REQ_ATTR_INVALID,
+
+ NL80211_PMSR_FTM_REQ_ATTR_ASAP,
+ NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE,
+ NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP,
+ NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD,
+ NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION,
+ NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST,
+ NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES,
+ NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI,
+ NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC,
+ NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED,
+ NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED,
+ NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK,
+ NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR,
+
+ /* keep last */
+ NUM_NL80211_PMSR_FTM_REQ_ATTR,
+ NL80211_PMSR_FTM_REQ_ATTR_MAX = NUM_NL80211_PMSR_FTM_REQ_ATTR - 1
+};
+
+/**
+ * enum nl80211_peer_measurement_ftm_failure_reasons - FTM failure reasons
+ * @NL80211_PMSR_FTM_FAILURE_UNSPECIFIED: unspecified failure, not used
+ * @NL80211_PMSR_FTM_FAILURE_NO_RESPONSE: no response from the FTM responder
+ * @NL80211_PMSR_FTM_FAILURE_REJECTED: FTM responder rejected measurement
+ * @NL80211_PMSR_FTM_FAILURE_WRONG_CHANNEL: we already know the peer is
+ * on a different channel, so can't measure (if we didn't know, we'd
+ * try and get no response)
+ * @NL80211_PMSR_FTM_FAILURE_PEER_NOT_CAPABLE: peer can't actually do FTM
+ * @NL80211_PMSR_FTM_FAILURE_INVALID_TIMESTAMP: invalid T1/T4 timestamps
+ * received
+ * @NL80211_PMSR_FTM_FAILURE_PEER_BUSY: peer reports busy, you may retry
+ * later (see %NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME)
+ * @NL80211_PMSR_FTM_FAILURE_BAD_CHANGED_PARAMS: parameters were changed
+ * by the peer and are no longer supported
+ */
+enum nl80211_peer_measurement_ftm_failure_reasons {
+ NL80211_PMSR_FTM_FAILURE_UNSPECIFIED,
+ NL80211_PMSR_FTM_FAILURE_NO_RESPONSE,
+ NL80211_PMSR_FTM_FAILURE_REJECTED,
+ NL80211_PMSR_FTM_FAILURE_WRONG_CHANNEL,
+ NL80211_PMSR_FTM_FAILURE_PEER_NOT_CAPABLE,
+ NL80211_PMSR_FTM_FAILURE_INVALID_TIMESTAMP,
+ NL80211_PMSR_FTM_FAILURE_PEER_BUSY,
+ NL80211_PMSR_FTM_FAILURE_BAD_CHANGED_PARAMS,
+};
+
+/**
+ * enum nl80211_peer_measurement_ftm_resp - FTM response attributes
+ * @__NL80211_PMSR_FTM_RESP_ATTR_INVALID: invalid
+ *
+ * @NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON: FTM-specific failure reason
+ * (u32, optional)
+ * @NL80211_PMSR_FTM_RESP_ATTR_BURST_INDEX: optional, if bursts are reported
+ * as separate results then it will be the burst index 0...(N-1) and
+ * the top level will indicate partial results (u32)
+ * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS: number of FTM Request frames
+ * transmitted (u32, optional)
+ * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES: number of FTM Request frames
+ * that were acknowleged (u32, optional)
+ * @NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME: retry time received from the
+ * busy peer (u32, seconds)
+ * @NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP: actual number of bursts exponent
+ * used by the responder (similar to request, u8)
+ * @NL80211_PMSR_FTM_RESP_ATTR_BURST_DURATION: actual burst duration used by
+ * the responder (similar to request, u8)
+ * @NL80211_PMSR_FTM_RESP_ATTR_FTMS_PER_BURST: actual FTMs per burst used
+ * by the responder (similar to request, u8)
+ * @NL80211_PMSR_FTM_RESP_ATTR_RSSI_AVG: average RSSI across all FTM action
+ * frames (optional, s32, 1/2 dBm)
+ * @NL80211_PMSR_FTM_RESP_ATTR_RSSI_SPREAD: RSSI spread across all FTM action
+ * frames (optional, s32, 1/2 dBm)
+ * @NL80211_PMSR_FTM_RESP_ATTR_TX_RATE: bitrate we used for the response to the
+ * FTM action frame (optional, nested, using &enum nl80211_rate_info
+ * attributes)
+ * @NL80211_PMSR_FTM_RESP_ATTR_RX_RATE: bitrate the responder used for the FTM
+ * action frame (optional, nested, using &enum nl80211_rate_info attrs)
+ * @NL80211_PMSR_FTM_RESP_ATTR_RTT_AVG: average RTT (s64, picoseconds, optional
+ * but one of RTT/DIST must be present)
+ * @NL80211_PMSR_FTM_RESP_ATTR_RTT_VARIANCE: RTT variance (u64, ps^2, note that
+ * standard deviation is the square root of variance, optional)
+ * @NL80211_PMSR_FTM_RESP_ATTR_RTT_SPREAD: RTT spread (u64, picoseconds,
+ * optional)
+ * @NL80211_PMSR_FTM_RESP_ATTR_DIST_AVG: average distance (s64, mm, optional
+ * but one of RTT/DIST must be present)
+ * @NL80211_PMSR_FTM_RESP_ATTR_DIST_VARIANCE: distance variance (u64, mm^2, note
+ * that standard deviation is the square root of variance, optional)
+ * @NL80211_PMSR_FTM_RESP_ATTR_DIST_SPREAD: distance spread (u64, mm, optional)
+ * @NL80211_PMSR_FTM_RESP_ATTR_LCI: LCI data from peer (binary, optional);
+ * this is the contents of the Measurement Report Element (802.11-2016
+ * 9.4.2.22.1) starting with the Measurement Token, with Measurement
+ * Type 8.
+ * @NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC: civic location data from peer
+ * (binary, optional);
+ * this is the contents of the Measurement Report Element (802.11-2016
+ * 9.4.2.22.1) starting with the Measurement Token, with Measurement
+ * Type 11.
+ * @NL80211_PMSR_FTM_RESP_ATTR_PAD: ignore, for u64/s64 padding only
+ *
+ * @NUM_NL80211_PMSR_FTM_RESP_ATTR: internal
+ * @NL80211_PMSR_FTM_RESP_ATTR_MAX: highest attribute number
+ */
+enum nl80211_peer_measurement_ftm_resp {
+ __NL80211_PMSR_FTM_RESP_ATTR_INVALID,
+
+ NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON,
+ NL80211_PMSR_FTM_RESP_ATTR_BURST_INDEX,
+ NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS,
+ NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES,
+ NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME,
+ NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP,
+ NL80211_PMSR_FTM_RESP_ATTR_BURST_DURATION,
+ NL80211_PMSR_FTM_RESP_ATTR_FTMS_PER_BURST,
+ NL80211_PMSR_FTM_RESP_ATTR_RSSI_AVG,
+ NL80211_PMSR_FTM_RESP_ATTR_RSSI_SPREAD,
+ NL80211_PMSR_FTM_RESP_ATTR_TX_RATE,
+ NL80211_PMSR_FTM_RESP_ATTR_RX_RATE,
+ NL80211_PMSR_FTM_RESP_ATTR_RTT_AVG,
+ NL80211_PMSR_FTM_RESP_ATTR_RTT_VARIANCE,
+ NL80211_PMSR_FTM_RESP_ATTR_RTT_SPREAD,
+ NL80211_PMSR_FTM_RESP_ATTR_DIST_AVG,
+ NL80211_PMSR_FTM_RESP_ATTR_DIST_VARIANCE,
+ NL80211_PMSR_FTM_RESP_ATTR_DIST_SPREAD,
+ NL80211_PMSR_FTM_RESP_ATTR_LCI,
+ NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC,
+ NL80211_PMSR_FTM_RESP_ATTR_PAD,
+
+ /* keep last */
+ NUM_NL80211_PMSR_FTM_RESP_ATTR,
+ NL80211_PMSR_FTM_RESP_ATTR_MAX = NUM_NL80211_PMSR_FTM_RESP_ATTR - 1
+};
+
+/**
+ * enum nl80211_obss_pd_attributes - OBSS packet detection attributes
+ * @__NL80211_HE_OBSS_PD_ATTR_INVALID: Invalid
+ *
+ * @NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET: the OBSS PD minimum tx power offset.
+ * @NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET: the OBSS PD maximum tx power offset.
+ * @NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET: the non-SRG OBSS PD maximum
+ * tx power offset.
+ * @NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP: bitmap that indicates the BSS color
+ * values used by members of the SRG.
+ * @NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP: bitmap that indicates the partial
+ * BSSID values used by members of the SRG.
+ * @NL80211_HE_OBSS_PD_ATTR_SR_CTRL: The SR Control field of SRP element.
+ *
+ * @__NL80211_HE_OBSS_PD_ATTR_LAST: Internal
+ * @NL80211_HE_OBSS_PD_ATTR_MAX: highest OBSS PD attribute.
+ */
+enum nl80211_obss_pd_attributes {
+ __NL80211_HE_OBSS_PD_ATTR_INVALID,
+
+ NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET,
+ NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET,
+ NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET,
+ NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP,
+ NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP,
+ NL80211_HE_OBSS_PD_ATTR_SR_CTRL,
+
+ /* keep last */
+ __NL80211_HE_OBSS_PD_ATTR_LAST,
+ NL80211_HE_OBSS_PD_ATTR_MAX = __NL80211_HE_OBSS_PD_ATTR_LAST - 1,
+};
+
+/**
+ * enum nl80211_bss_color_attributes - BSS Color attributes
+ * @__NL80211_HE_BSS_COLOR_ATTR_INVALID: Invalid
+ *
+ * @NL80211_HE_BSS_COLOR_ATTR_COLOR: the current BSS Color.
+ * @NL80211_HE_BSS_COLOR_ATTR_DISABLED: is BSS coloring disabled.
+ * @NL80211_HE_BSS_COLOR_ATTR_PARTIAL: the AID equation to be used..
+ *
+ * @__NL80211_HE_BSS_COLOR_ATTR_LAST: Internal
+ * @NL80211_HE_BSS_COLOR_ATTR_MAX: highest BSS Color attribute.
+ */
+enum nl80211_bss_color_attributes {
+ __NL80211_HE_BSS_COLOR_ATTR_INVALID,
+
+ NL80211_HE_BSS_COLOR_ATTR_COLOR,
+ NL80211_HE_BSS_COLOR_ATTR_DISABLED,
+ NL80211_HE_BSS_COLOR_ATTR_PARTIAL,
+
+ /* keep last */
+ __NL80211_HE_BSS_COLOR_ATTR_LAST,
+ NL80211_HE_BSS_COLOR_ATTR_MAX = __NL80211_HE_BSS_COLOR_ATTR_LAST - 1,
+};
+
+/**
+ * enum nl80211_iftype_akm_attributes - interface type AKM attributes
+ * @__NL80211_IFTYPE_AKM_ATTR_INVALID: Invalid
+ *
+ * @NL80211_IFTYPE_AKM_ATTR_IFTYPES: nested attribute containing a flag
+ * attribute for each interface type that supports AKM suites specified in
+ * %NL80211_IFTYPE_AKM_ATTR_SUITES
+ * @NL80211_IFTYPE_AKM_ATTR_SUITES: an array of u32. Used to indicate supported
+ * AKM suites for the specified interface types.
+ *
+ * @__NL80211_IFTYPE_AKM_ATTR_LAST: Internal
+ * @NL80211_IFTYPE_AKM_ATTR_MAX: highest interface type AKM attribute.
+ */
+enum nl80211_iftype_akm_attributes {
+ __NL80211_IFTYPE_AKM_ATTR_INVALID,
+
+ NL80211_IFTYPE_AKM_ATTR_IFTYPES,
+ NL80211_IFTYPE_AKM_ATTR_SUITES,
+
+ /* keep last */
+ __NL80211_IFTYPE_AKM_ATTR_LAST,
+ NL80211_IFTYPE_AKM_ATTR_MAX = __NL80211_IFTYPE_AKM_ATTR_LAST - 1,
+};
+
+/**
+ * enum nl80211_fils_discovery_attributes - FILS discovery configuration
+ * from IEEE Std 802.11ai-2016, Annex C.3 MIB detail.
+ *
+ * @__NL80211_FILS_DISCOVERY_ATTR_INVALID: Invalid
+ *
+ * @NL80211_FILS_DISCOVERY_ATTR_INT_MIN: Minimum packet interval (u32, TU).
+ * Allowed range: 0..10000 (TU = Time Unit)
+ * @NL80211_FILS_DISCOVERY_ATTR_INT_MAX: Maximum packet interval (u32, TU).
+ * Allowed range: 0..10000 (TU = Time Unit)
+ * @NL80211_FILS_DISCOVERY_ATTR_TMPL: Template data for FILS discovery action
+ * frame including the headers.
+ *
+ * @__NL80211_FILS_DISCOVERY_ATTR_LAST: Internal
+ * @NL80211_FILS_DISCOVERY_ATTR_MAX: highest attribute
+ */
+enum nl80211_fils_discovery_attributes {
+ __NL80211_FILS_DISCOVERY_ATTR_INVALID,
+
+ NL80211_FILS_DISCOVERY_ATTR_INT_MIN,
+ NL80211_FILS_DISCOVERY_ATTR_INT_MAX,
+ NL80211_FILS_DISCOVERY_ATTR_TMPL,
+
+ /* keep last */
+ __NL80211_FILS_DISCOVERY_ATTR_LAST,
+ NL80211_FILS_DISCOVERY_ATTR_MAX = __NL80211_FILS_DISCOVERY_ATTR_LAST - 1
+};
+
+/*
+ * FILS discovery template minimum length with action frame headers and
+ * mandatory fields.
+ */
+#define NL80211_FILS_DISCOVERY_TMPL_MIN_LEN 42
+
+/**
+ * enum nl80211_unsol_bcast_probe_resp_attributes - Unsolicited broadcast probe
+ * response configuration. Applicable only in 6GHz.
+ *
+ * @__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INVALID: Invalid
+ *
+ * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT: Maximum packet interval (u32, TU).
+ * Allowed range: 0..20 (TU = Time Unit). IEEE P802.11ax/D6.0
+ * 26.17.2.3.2 (AP behavior for fast passive scanning).
+ * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL: Unsolicited broadcast probe response
+ * frame template (binary).
+ *
+ * @__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST: Internal
+ * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX: highest attribute
+ */
+enum nl80211_unsol_bcast_probe_resp_attributes {
+ __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INVALID,
+
+ NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT,
+ NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL,
+
+ /* keep last */
+ __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST,
+ NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX =
+ __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST - 1
+};
+
+/**
+ * enum nl80211_sae_pwe_mechanism - The mechanism(s) allowed for SAE PWE
+ * derivation. Applicable only when WPA3-Personal SAE authentication is
+ * used.
+ *
+ * @NL80211_SAE_PWE_UNSPECIFIED: not specified, used internally to indicate that
+ * attribute is not present from userspace.
+ * @NL80211_SAE_PWE_HUNT_AND_PECK: hunting-and-pecking loop only
+ * @NL80211_SAE_PWE_HASH_TO_ELEMENT: hash-to-element only
+ * @NL80211_SAE_PWE_BOTH: both hunting-and-pecking loop and hash-to-element
+ * can be used.
+ */
+enum nl80211_sae_pwe_mechanism {
+ NL80211_SAE_PWE_UNSPECIFIED,
+ NL80211_SAE_PWE_HUNT_AND_PECK,
+ NL80211_SAE_PWE_HASH_TO_ELEMENT,
+ NL80211_SAE_PWE_BOTH,
+};
+
+/**
+ * enum nl80211_sar_type - type of SAR specs
+ *
+ * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit
+ *
+ */
+enum nl80211_sar_type {
+ NL80211_SAR_TYPE_POWER,
+
+ /* add new type here */
+
+ /* Keep last */
+ NUM_NL80211_SAR_TYPE,
+};
+
+/**
+ * enum nl80211_sar_attrs - Attributes for SAR spec
+ *
+ * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type.
+ *
+ * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power
+ * limit specifications. Each specification contains a set
+ * of %nl80211_sar_specs_attrs.
+ *
+ * For SET operation, it contains array of %NL80211_SAR_ATTR_SPECS_POWER
+ * and %NL80211_SAR_ATTR_SPECS_RANGE_INDEX.
+ *
+ * For sar_capa dump, it contains array of
+ * %NL80211_SAR_ATTR_SPECS_START_FREQ
+ * and %NL80211_SAR_ATTR_SPECS_END_FREQ.
+ *
+ * @__NL80211_SAR_ATTR_LAST: Internal
+ * @NL80211_SAR_ATTR_MAX: highest sar attribute
+ *
+ * These attributes are used with %NL80211_CMD_SET_SAR_SPEC
+ */
+enum nl80211_sar_attrs {
+ __NL80211_SAR_ATTR_INVALID,
+
+ NL80211_SAR_ATTR_TYPE,
+ NL80211_SAR_ATTR_SPECS,
+
+ __NL80211_SAR_ATTR_LAST,
+ NL80211_SAR_ATTR_MAX = __NL80211_SAR_ATTR_LAST - 1,
+};
+
+/**
+ * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs
+ *
+ * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual
+ * power limit value in units of 0.25 dBm if type is
+ * NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm).
+ * 0 means userspace doesn't have SAR limitation on this associated range.
+ *
+ * @NL80211_SAR_ATTR_SPECS_RANGE_INDEX: Required (u32) value to specify the
+ * index of exported freq range table and the associated power limitation
+ * is applied to this range.
+ *
+ * Userspace isn't required to set all the ranges advertised by WLAN driver,
+ * and userspace can skip some certain ranges. These skipped ranges don't
+ * have SAR limitations, and they are same as setting the
+ * %NL80211_SAR_ATTR_SPECS_POWER to any unreasonable high value because any
+ * value higher than regulatory allowed value just means SAR power
+ * limitation is removed, but it's required to set at least one range.
+ * It's not allowed to set duplicated range in one SET operation.
+ *
+ * Every SET operation overwrites previous SET operation.
+ *
+ * @NL80211_SAR_ATTR_SPECS_START_FREQ: Required (u32) value to specify the start
+ * frequency of this range edge when registering SAR capability to wiphy.
+ * It's not a channel center frequency. The unit is kHz.
+ *
+ * @NL80211_SAR_ATTR_SPECS_END_FREQ: Required (u32) value to specify the end
+ * frequency of this range edge when registering SAR capability to wiphy.
+ * It's not a channel center frequency. The unit is kHz.
+ *
+ * @__NL80211_SAR_ATTR_SPECS_LAST: Internal
+ * @NL80211_SAR_ATTR_SPECS_MAX: highest sar specs attribute
+ */
+enum nl80211_sar_specs_attrs {
+ __NL80211_SAR_ATTR_SPECS_INVALID,
+
+ NL80211_SAR_ATTR_SPECS_POWER,
+ NL80211_SAR_ATTR_SPECS_RANGE_INDEX,
+ NL80211_SAR_ATTR_SPECS_START_FREQ,
+ NL80211_SAR_ATTR_SPECS_END_FREQ,
+
+ __NL80211_SAR_ATTR_SPECS_LAST,
+ NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1,
+};
+
#endif /* __LINUX_NL80211_H */
projects / project / iwinfo.git / commitdiff