--- /dev/null
+#include <linux/delay.h>
+#include <linux/if_ether.h>
+#include <linux/ioport.h>
+#include <linux/mv643xx.h>
+#include <linux/platform_device.h>
+
+#include "ocelot_c_fpga.h"
+
+#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE)
+
+static struct resource mv643xx_eth_shared_resources[] = {
+ [0] = {
+ .name = "ethernet shared base",
+ .start = 0xf1000000 + MV643XX_ETH_SHARED_REGS,
+ .end = 0xf1000000 + MV643XX_ETH_SHARED_REGS +
+ MV643XX_ETH_SHARED_REGS_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device mv643xx_eth_shared_device = {
+ .name = MV643XX_ETH_SHARED_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mv643xx_eth_shared_resources),
+ .resource = mv643xx_eth_shared_resources,
+};
+
+#define MV_SRAM_BASE 0xfe000000UL
+#define MV_SRAM_SIZE (256 * 1024)
+
+#define MV_SRAM_RXRING_SIZE (MV_SRAM_SIZE / 4)
+#define MV_SRAM_TXRING_SIZE (MV_SRAM_SIZE / 4)
+
+#define MV_SRAM_BASE_ETH0 MV_SRAM_BASE
+#define MV_SRAM_BASE_ETH1 (MV_SRAM_BASE + (MV_SRAM_SIZE / 2))
+
+#define MV64x60_IRQ_ETH_0 48
+#define MV64x60_IRQ_ETH_1 49
+
+#ifdef CONFIG_MV643XX_ETH_0
+
+static struct resource mv64x60_eth0_resources[] = {
+ [0] = {
+ .name = "eth0 irq",
+ .start = MV64x60_IRQ_ETH_0,
+ .end = MV64x60_IRQ_ETH_0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static char eth0_mac_addr[ETH_ALEN];
+
+static struct mv643xx_eth_platform_data eth0_pd = {
+ .mac_addr = eth0_mac_addr,
+
+ .tx_sram_addr = MV_SRAM_BASE_ETH0,
+ .tx_sram_size = MV_SRAM_TXRING_SIZE,
+ .tx_queue_size = MV_SRAM_TXRING_SIZE / 16,
+
+ .rx_sram_addr = MV_SRAM_BASE_ETH0 + MV_SRAM_TXRING_SIZE,
+ .rx_sram_size = MV_SRAM_RXRING_SIZE,
+ .rx_queue_size = MV_SRAM_RXRING_SIZE / 16,
+};
+
+static struct platform_device eth0_device = {
+ .name = MV643XX_ETH_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mv64x60_eth0_resources),
+ .resource = mv64x60_eth0_resources,
+ .dev = {
+ .platform_data = ð0_pd,
+ },
+};
+#endif /* CONFIG_MV643XX_ETH_0 */
+
+#ifdef CONFIG_MV643XX_ETH_1
+
+static struct resource mv64x60_eth1_resources[] = {
+ [0] = {
+ .name = "eth1 irq",
+ .start = MV64x60_IRQ_ETH_1,
+ .end = MV64x60_IRQ_ETH_1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static char eth1_mac_addr[ETH_ALEN];
+
+static struct mv643xx_eth_platform_data eth1_pd = {
+ .mac_addr = eth1_mac_addr,
+
+ .tx_sram_addr = MV_SRAM_BASE_ETH1,
+ .tx_sram_size = MV_SRAM_TXRING_SIZE,
+ .tx_queue_size = MV_SRAM_TXRING_SIZE / 16,
+
+ .rx_sram_addr = MV_SRAM_BASE_ETH1 + MV_SRAM_TXRING_SIZE,
+ .rx_sram_size = MV_SRAM_RXRING_SIZE,
+ .rx_queue_size = MV_SRAM_RXRING_SIZE / 16,
+};
+
+static struct platform_device eth1_device = {
+ .name = MV643XX_ETH_NAME,
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mv64x60_eth1_resources),
+ .resource = mv64x60_eth1_resources,
+ .dev = {
+ .platform_data = ð1_pd,
+ },
+};
+#endif /* CONFIG_MV643XX_ETH_1 */
+
+static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
+ &mv643xx_eth_shared_device,
+#ifdef CONFIG_MV643XX_ETH_0
+ ð0_device,
+#endif
+#ifdef CONFIG_MV643XX_ETH_1
+ ð1_device,
+#endif
+ /* The third port is not wired up on the Ocelot C */
+};
+
+static u8 __init exchange_bit(u8 val, u8 cs)
+{
+ /* place the data */
+ OCELOT_FPGA_WRITE((val << 2) | cs, EEPROM_MODE);
+ udelay(1);
+
+ /* turn the clock on */
+ OCELOT_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE);
+ udelay(1);
+
+ /* turn the clock off and read-strobe */
+ OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE);
+
+ /* return the data */
+ return (OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1;
+}
+
+static void __init get_mac(char dest[6])
+{
+ u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+ int i,j;
+
+ for (i = 0; i < 12; i++)
+ exchange_bit(read_opcode[i], 1);
+
+ for (j = 0; j < 6; j++) {
+ dest[j] = 0;
+ for (i = 0; i < 8; i++) {
+ dest[j] <<= 1;
+ dest[j] |= exchange_bit(0, 1);
+ }
+ }
+
+ /* turn off CS */
+ exchange_bit(0,0);
+}
+
+/*
+ * Copy and increment ethernet MAC address by a small value.
+ *
+ * This is useful for systems where the only one MAC address is stored in
+ * non-volatile memory for multiple ports.
+ */
+static inline void eth_mac_add(unsigned char *dst, unsigned char *src,
+ unsigned int add)
+{
+ int i;
+
+ BUG_ON(add >= 256);
+
+ for (i = ETH_ALEN; i >= 0; i--) {
+ dst[i] = src[i] + add;
+ add = dst[i] < src[i]; /* compute carry */
+ }
+
+ WARN_ON(add);
+}
+
+static int __init mv643xx_eth_add_pds(void)
+{
+ unsigned char mac[ETH_ALEN];
+ int ret;
+
+ get_mac(mac);
+#ifdef CONFIG_MV643XX_ETH_0
+ eth_mac_add(eth1_mac_addr, mac, 0);
+#endif
+#ifdef CONFIG_MV643XX_ETH_1
+ eth_mac_add(eth1_mac_addr, mac, 1);
+#endif
+ ret = platform_add_devices(mv643xx_eth_pd_devs,
+ ARRAY_SIZE(mv643xx_eth_pd_devs));
+
+ return ret;
+}
+
+device_initcall(mv643xx_eth_add_pds);
+
+#endif /* defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE) */
extern unsigned long marvell_base;
extern unsigned int cpu_clock;
-#ifdef CONFIG_MV643XX_ETH
-extern unsigned char prom_mac_addr_base[6];
-#endif
-
const char *get_system_type(void)
{
#ifdef CONFIG_CPU_SR71000
#endif
}
-#ifdef CONFIG_MV643XX_ETH
-static void burn_clocks(void)
-{
- int i;
-
- /* this loop should burn at least 1us -- this should be plenty */
- for (i = 0; i < 0x10000; i++)
- ;
-}
-
-static u8 exchange_bit(u8 val, u8 cs)
-{
- /* place the data */
- OCELOT_FPGA_WRITE((val << 2) | cs, EEPROM_MODE);
- burn_clocks();
-
- /* turn the clock on */
- OCELOT_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE);
- burn_clocks();
-
- /* turn the clock off and read-strobe */
- OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE);
-
- /* return the data */
- return ((OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1);
-}
-
-void get_mac(char dest[6])
-{
- u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
- int i,j;
-
- for (i = 0; i < 12; i++)
- exchange_bit(read_opcode[i], 1);
-
- for (j = 0; j < 6; j++) {
- dest[j] = 0;
- for (i = 0; i < 8; i++) {
- dest[j] <<= 1;
- dest[j] |= exchange_bit(0, 1);
- }
- }
-
- /* turn off CS */
- exchange_bit(0,0);
-}
-#endif
-
-
#ifdef CONFIG_64BIT
unsigned long signext(unsigned long addr)
mips_machgroup = MACH_GROUP_MOMENCO;
mips_machtype = MACH_MOMENCO_OCELOT_C;
-#ifdef CONFIG_MV643XX_ETH
- /* get the base MAC address for on-board ethernet ports */
- get_mac(prom_mac_addr_base);
-#endif
-
#ifndef CONFIG_64BIT
debug_vectors->printf("Booting Linux kernel...\n");
#endif
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/timex.h>
#include <linux/vmalloc.h>
}
module_init(io_base_ioremap);
-
-#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE)
-
-static struct resource mv643xx_eth_shared_resources[] = {
- [0] = {
- .name = "ethernet shared base",
- .start = 0xf1000000 + MV643XX_ETH_SHARED_REGS,
- .end = 0xf1000000 + MV643XX_ETH_SHARED_REGS +
- MV643XX_ETH_SHARED_REGS_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device mv643xx_eth_shared_device = {
- .name = MV643XX_ETH_SHARED_NAME,
- .id = 0,
- .num_resources = ARRAY_SIZE(mv643xx_eth_shared_resources),
- .resource = mv643xx_eth_shared_resources,
-};
-
-#define MV_SRAM_BASE 0xfe000000UL
-#define MV_SRAM_SIZE (256 * 1024)
-
-#define MV_SRAM_RXRING_SIZE (MV_SRAM_SIZE / 4)
-#define MV_SRAM_TXRING_SIZE (MV_SRAM_SIZE / 4)
-
-#define MV_SRAM_BASE_ETH0 MV_SRAM_BASE
-#define MV_SRAM_BASE_ETH1 (MV_SRAM_BASE + (MV_SRAM_SIZE / 2))
-
-#define MV64x60_IRQ_ETH_0 48
-#define MV64x60_IRQ_ETH_1 49
-
-#ifdef CONFIG_MV643XX_ETH_0
-
-static struct resource mv64x60_eth0_resources[] = {
- [0] = {
- .name = "eth0 irq",
- .start = MV64x60_IRQ_ETH_0,
- .end = MV64x60_IRQ_ETH_0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct mv643xx_eth_platform_data eth0_pd = {
- .tx_sram_addr = MV_SRAM_BASE_ETH0,
- .tx_sram_size = MV_SRAM_TXRING_SIZE,
- .tx_queue_size = MV_SRAM_TXRING_SIZE / 16,
-
- .rx_sram_addr = MV_SRAM_BASE_ETH0 + MV_SRAM_TXRING_SIZE,
- .rx_sram_size = MV_SRAM_RXRING_SIZE,
- .rx_queue_size = MV_SRAM_RXRING_SIZE / 16,
-};
-
-static struct platform_device eth0_device = {
- .name = MV643XX_ETH_NAME,
- .id = 0,
- .num_resources = ARRAY_SIZE(mv64x60_eth0_resources),
- .resource = mv64x60_eth0_resources,
- .dev = {
- .platform_data = ð0_pd,
- },
-};
-#endif /* CONFIG_MV643XX_ETH_0 */
-
-#ifdef CONFIG_MV643XX_ETH_1
-
-static struct resource mv64x60_eth1_resources[] = {
- [0] = {
- .name = "eth1 irq",
- .start = MV64x60_IRQ_ETH_1,
- .end = MV64x60_IRQ_ETH_1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct mv643xx_eth_platform_data eth1_pd = {
- .tx_sram_addr = MV_SRAM_BASE_ETH1,
- .tx_sram_size = MV_SRAM_TXRING_SIZE,
- .tx_queue_size = MV_SRAM_TXRING_SIZE / 16,
-
- .rx_sram_addr = MV_SRAM_BASE_ETH1 + MV_SRAM_TXRING_SIZE,
- .rx_sram_size = MV_SRAM_RXRING_SIZE,
- .rx_queue_size = MV_SRAM_RXRING_SIZE / 16,
-};
-
-static struct platform_device eth1_device = {
- .name = MV643XX_ETH_NAME,
- .id = 1,
- .num_resources = ARRAY_SIZE(mv64x60_eth1_resources),
- .resource = mv64x60_eth1_resources,
- .dev = {
- .platform_data = ð1_pd,
- },
-};
-#endif /* CONFIG_MV643XX_ETH_1 */
-
-static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
- &mv643xx_eth_shared_device,
-#ifdef CONFIG_MV643XX_ETH_0
- ð0_device,
-#endif
-#ifdef CONFIG_MV643XX_ETH_1
- ð1_device,
-#endif
- /* The third port is not wired up on the Ocelot C */
-};
-
-int mv643xx_eth_add_pds(void)
-{
- int ret;
-
- ret = platform_add_devices(mv643xx_eth_pd_devs,
- ARRAY_SIZE(mv643xx_eth_pd_devs));
-
- return ret;
-}
-
-device_initcall(mv643xx_eth_add_pds);
-
-#endif /* defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE) */
projects / openwrt / staging / blogic.git / commitdiff