mpc85xx: overhaul WS-AP3825i LED setup

As the LED controller is working now, we can make good use of the LEDs
now.

 - Drop the model-name prefix
 - Rename eth0 / eth1 LEDs to LAN1 / LAN2, as they are labeled as such
   on the casing
 - Enable wired LEDs in userspace

Signed-off-by: David Bauer <mail@david-bauer.net>

diff --git a/target/linux/mpc85xx/base-files/etc/board.d/01_leds b/target/linux/mpc85xx/base-files/etc/board.d/01_leds
new file mode 100644 (file)
index 0000000..391c909
--- /dev/null
+++ b/target/linux/mpc85xx/base-files/etc/board.d/01_leds
@@ -0,0 +1,19 @@
+
+. /lib/functions/leds.sh
+. /lib/functions/uci-defaults.sh
+
+board=$(board_name)
+boardname="${board##*,}"
+
+board_config_update
+
+case $board in
+extreme-networks,ws-ap3825i)
+       ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "eth1"
+       ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "eth0"
+       ;;
+esac
+
+board_config_flush
+
+exit 0

diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts
index 7385f3402cffed5e3500e831a8db1fe832d254d0..43c044b4fc6ccce01d6714e8a783353af2dae22f 100644 (file)
--- a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts
+++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts
@@ -31,44 +31,44 @@
 
                wifi1 {
                        gpios = <&spi_gpio 3 GPIO_ACTIVE_HIGH>;
-                       label = "ws-ap3825i:green:radio1";
+                       label = "green:radio1";
                        linux,default-trigger = "phy0tpt";
                };
 
                wifi2 {
                        gpios = <&spi_gpio 2 GPIO_ACTIVE_HIGH>;
-                       label = "ws-ap3825i:green:radio2";
+                       label = "green:radio2";
                        linux,default-trigger = "phy1tpt";
                };
 
                led_power_green: power_green {
                        gpios = <&spi_gpio 0 GPIO_ACTIVE_HIGH>;
-                       label = "ws-ap3825i:green:power";
+                       label = "green:power";
                };
 
                led_power_red: power_red {
                        gpios = <&spi_gpio 1 GPIO_ACTIVE_HIGH>;
-                       label = "ws-ap3825i:red:power";
+                       label = "red:power";
                };
 
-               eth0_red {
+               lan1_red {
                        gpios = <&spi_gpio 6 GPIO_ACTIVE_HIGH>;
-                       label = "ws-ap3825i:red:eth0";
+                       label = "red:lan1";
                };
 
-               eth0_green {
+               lan1_green {
                        gpios = <&spi_gpio 4 GPIO_ACTIVE_HIGH>;
-                       label = "ws-ap3825i:green:eth0";
+                       label = "green:lan1";
                };
 
-               eth1_red {
+               lan2_red {
                        gpios = <&spi_gpio 7 GPIO_ACTIVE_HIGH>;
-                       label = "ws-ap3825i:red:eth1";
+                       label = "red:lan2";
                };
 
-               eth1_green {
+               lan2_green {
                        gpios = <&spi_gpio 5 GPIO_ACTIVE_HIGH>;
-                       label = "ws-ap3825i:green:eth1";
+                       label = "green:lan2";
                };
        };