--- /dev/null
+config interface loopback
+ option ifname lo
+ option proto static
+ option ipaddr 127.0.0.1
+ option netmask 255.0.0.0
+
+config interface eth
+ option ifname eth0
+ option proto none
+
+config interface lan
+ option ifname lan
+ option type bridge
+ option proto static
+ option ipaddr 192.168.1.1
+ option netmask 255.255.255.0
tew-632brp)
status_led="tew-632brp:green:status"
;;
+ tl-wa901nd)
+ status_led="tl-wa901nd:green:system"
+ ;;
tl-wr1043nd)
status_led="tl-wr1043nd:green:system"
;;
*"DIR-615 rev. C1")
name="dir-615-c1"
;;
+ *TL-WA901ND)
+ name="tl-wa901nd"
+ ;;
*TL-WR741ND)
name="tl-wr741nd"
;;
}
return 0
;;
- tl-wr741nd | tl-wr841n-v1 | tl-wr941nd | tl-wr1043nd)
+ tl-wa901nd | tl-wr741nd | tl-wr841n-v1 | tl-wr941nd | tl-wr1043nd)
[ "$magic" != "0100" ] && {
echo "Invalid image type."
return 1
CONFIG_AR71XX_MACH_RB4XX=y
CONFIG_AR71XX_MACH_RB750=y
CONFIG_AR71XX_MACH_TEW_632BRP=y
+CONFIG_AR71XX_MACH_TL_WA901ND=y
CONFIG_AR71XX_MACH_TL_WR1043ND=y
CONFIG_AR71XX_MACH_TL_WR741ND=y
CONFIG_AR71XX_MACH_TL_WR841N_V1=y
CONFIG_AR71XX_MACH_RB4XX=y
CONFIG_AR71XX_MACH_RB750=y
CONFIG_AR71XX_MACH_TEW_632BRP=y
+CONFIG_AR71XX_MACH_TL_WA901ND=y
CONFIG_AR71XX_MACH_TL_WR1043ND=y
CONFIG_AR71XX_MACH_TL_WR741ND=y
CONFIG_AR71XX_MACH_TL_WR841N_V1=y
CONFIG_AR71XX_MACH_RB4XX=y
CONFIG_AR71XX_MACH_RB750=y
CONFIG_AR71XX_MACH_TEW_632BRP=y
+CONFIG_AR71XX_MACH_TL_WA901ND=y
CONFIG_AR71XX_MACH_TL_WR1043ND=y
CONFIG_AR71XX_MACH_TL_WR741ND=y
CONFIG_AR71XX_MACH_TL_WR841N_V1=y
CONFIG_AR71XX_MACH_RB4XX=y
CONFIG_AR71XX_MACH_RB750=y
CONFIG_AR71XX_MACH_TEW_632BRP=y
+CONFIG_AR71XX_MACH_TL_WA901ND=y
CONFIG_AR71XX_MACH_TL_WR1043ND=y
CONFIG_AR71XX_MACH_TL_WR741ND=y
CONFIG_AR71XX_MACH_TL_WR841N_V1=y
select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_LEDS_GPIO
default n
+
+config AR71XX_MACH_TL_WA901ND
+ bool "TP-LINK TL-WA901ND support"
+ select AR71XX_DEV_M25P80
+ select AR71XX_DEV_AP91_ETH
+ select AR71XX_DEV_AP91_PCI if PCI
+ select AR71XX_DEV_DSA
+ select AR71XX_DEV_GPIO_BUTTONS
+ select AR71XX_DEV_LEDS_GPIO
+ default n
config AR71XX_MACH_TL_WR741ND
bool "TP-LINK TL-WR741ND support"
obj-$(CONFIG_AR71XX_MACH_RB4XX) += mach-rb4xx.o
obj-$(CONFIG_AR71XX_MACH_RB750) += mach-rb750.o
obj-$(CONFIG_AR71XX_MACH_TEW_632BRP) += mach-tew-632brp.o
+obj-$(CONFIG_AR71XX_MACH_TL_WA901ND) += mach-tl-wa901nd.o
obj-$(CONFIG_AR71XX_MACH_TL_WR741ND) += mach-tl-wr741nd.o
obj-$(CONFIG_AR71XX_MACH_TL_WR841N_V1) += mach-tl-wr841n.o
obj-$(CONFIG_AR71XX_MACH_TL_WR941ND) += mach-tl-wr941nd.o
--- /dev/null
+/*
+ * TP-LINK TL-WA901ND board support
+ *
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2010 Pieter Hollants <pieter@hollants.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-dsa.h"
+#include "dev-m25p80.h"
+#include "dev-ap91-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+
+#define TL_WA901ND_GPIO_LED_QSS 0
+#define TL_WA901ND_GPIO_LED_SYSTEM 1
+
+#define TL_WA901ND_GPIO_BTN_RESET 11
+#define TL_WA901ND_GPIO_BTN_QSS 12
+
+#define TL_WA901ND_BUTTONS_POLL_INTERVAL 20
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition tl_wa901nd_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "kernel",
+ .offset = 0x020000,
+ .size = 0x140000,
+ } , {
+ .name = "rootfs",
+ .offset = 0x160000,
+ .size = 0x290000,
+ } , {
+ .name = "art",
+ .offset = 0x3f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "firmware",
+ .offset = 0x020000,
+ .size = 0x3d0000,
+ }
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data tl_wa901nd_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+ .parts = tl_wa901nd_partitions,
+ .nr_parts = ARRAY_SIZE(tl_wa901nd_partitions),
+#endif
+};
+
+static struct gpio_led tl_wa901nd_leds_gpio[] __initdata = {
+ {
+ .name = "tl-wa901nd:green:system",
+ .gpio = TL_WA901ND_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tl-wa901nd:green:qss",
+ .gpio = TL_WA901ND_GPIO_LED_QSS,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_button tl_wa901nd_gpio_buttons[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .threshold = 3,
+ .gpio = TL_WA901ND_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "qss",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .threshold = 3,
+ .gpio = TL_WA901ND_GPIO_BTN_QSS,
+ .active_low = 1,
+ }
+};
+
+static struct dsa_chip_data tl_wa901nd_v1_dsa_chip = {
+ .port_names[0] = "cpu",
+ .port_names[1] = "lan",
+};
+
+static struct dsa_platform_data tl_wa901nd_v1_dsa_data = {
+ .nr_chips = 1,
+ .chip = &tl_wa901nd_v1_dsa_chip,
+};
+
+static void __init tl_wa901nd_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ar71xx_set_mac_base(mac);
+
+ /*
+ * ar71xx_eth0 would be the WAN port, but is not connected on
+ * the TL-WA901ND. ar71xx_eth1 connects to the internal switch chip,
+ * however we have a single LAN port only.
+ */
+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ar71xx_eth1_data.speed = SPEED_1000;
+ ar71xx_eth1_data.duplex = DUPLEX_FULL;
+
+ ar71xx_add_device_mdio(0x0);
+ ar71xx_add_device_eth(1);
+
+ ar71xx_add_device_dsa(1, &tl_wa901nd_v1_dsa_data);
+
+ ar71xx_add_device_m25p80(&tl_wa901nd_flash_data);
+
+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_leds_gpio),
+ tl_wa901nd_leds_gpio);
+
+ ar71xx_add_device_gpio_buttons(-1, TL_WA901ND_BUTTONS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wa901nd_gpio_buttons),
+ tl_wa901nd_gpio_buttons);
+
+ ap91_pci_init(ee, mac);
+}
+
+MIPS_MACHINE(AR71XX_MACH_TL_WA901ND, "TL-WA901ND", "TP-LINK TL-WA901ND",
+ tl_wa901nd_setup);
AR71XX_MACH_MZK_W300NH, /* Planex MZK-W300NH */
AR71XX_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */
AR71XX_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */
+ AR71XX_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */
AR71XX_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */
AR71XX_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */
AR71XX_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */
# See /LICENSE for more information.
#
+define Profile/TLWA901NDV1
+ NAME:=TP-LINK TL-WA901ND v1
+ PACKAGES:=kmod-ath9k wpad-mini
+endef
+
+define Profile/TLWA901NDV1/Description
+ Package set optimized for the TP-LINK TL-WA901ND v1.
+endef
+
+$(eval $(call Profile,TLWA901NDV1))
+
define Profile/TLWR741NDV1
NAME:=TP-LINK TL-WR741ND v1
PACKAGES:=kmod-ath9k wpad-mini
$(call Image/Build/Template/$(fs_64k)/$(1),Planex,mzk-w300nh,board=MZK-W300NH)
endef
+define Image/Build/Profile/TLWA901NDV1
+ $(call Image/Build/Template/$(fs_4k)/$(1),TPLINK,tl-wa901nd-v1,board=TL-WA901ND,TL-WA901NDv1)
+endef
+
define Image/Build/Profile/TLWR741NDV1
$(call Image/Build/Template/$(fs_4k)/$(1),TPLINK,tl-wr741nd-v1,board=TL-WR741ND,TL-WR741NDv1)
endef
$(call Image/Build/Profile/PB92,$(1))
$(call Image/Build/Profile/TEW632BRP,$(1))
$(call Image/Build/Profile/TEW652BRP,$(1))
+ $(call Image/Build/Profile/TLWA901NDV1,$(1))
$(call Image/Build/Profile/TLWR741NDV1,$(1))
$(call Image/Build/Profile/TLWR841NV15,$(1))
$(call Image/Build/Profile/TLWR841NDV3,$(1))
projects / openwrt / staging / luka.git / commitdiff