CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DRIVER_MIPS=y
+CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
u32 bcma_pmu_get_alp_clock(struct bcma_drv_cc *cc);
u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc);
-@@ -101,6 +107,14 @@ static inline void __exit bcma_host_soc_
+@@ -100,7 +106,35 @@ static inline void __exit bcma_host_soc_
+ #endif /* CONFIG_BCMA_HOST_SOC && CONFIG_OF */
/* driver_pci.c */
++#ifdef CONFIG_BCMA_DRIVER_PCI
u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address);
+void bcma_core_pci_early_init(struct bcma_drv_pci *pc);
+void bcma_core_pci_init(struct bcma_drv_pci *pc);
+void bcma_core_pci_up(struct bcma_drv_pci *pc);
+void bcma_core_pci_down(struct bcma_drv_pci *pc);
++#else
++static inline void bcma_core_pci_early_init(struct bcma_drv_pci *pc)
++{
++ WARN_ON(pc->core->bus->hosttype == BCMA_HOSTTYPE_PCI);
++}
++static inline void bcma_core_pci_init(struct bcma_drv_pci *pc)
++{
++ /* Initialization is required for PCI hosted bus */
++ WARN_ON(pc->core->bus->hosttype == BCMA_HOSTTYPE_PCI);
++}
++#endif
+
+/* driver_pcie2.c */
++#ifdef CONFIG_BCMA_DRIVER_PCI
+void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2);
+void bcma_core_pcie2_up(struct bcma_drv_pcie2 *pcie2);
++#else
++static inline void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2)
++{
++ /* Initialization is required for PCI hosted bus */
++ WARN_ON(pcie2->core->bus->hosttype == BCMA_HOSTTYPE_PCI);
++}
++#endif
extern int bcma_chipco_watchdog_register(struct bcma_drv_cc *cc);
-@@ -117,6 +131,39 @@ static inline void bcma_core_pci_hostmod
+@@ -117,6 +151,39 @@ static inline void bcma_core_pci_hostmod
}
#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
extern int bcma_core_enable(struct bcma_device *core, u32 flags);
--- a/include/linux/bcma/bcma_driver_pci.h
+++ b/include/linux/bcma/bcma_driver_pci.h
-@@ -238,12 +238,6 @@ struct bcma_drv_pci {
+@@ -238,13 +238,13 @@ struct bcma_drv_pci {
#define pcicore_write16(pc, offset, val) bcma_write16((pc)->core, offset, val)
#define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val)
- struct bcma_device *core, bool enable);
-extern void bcma_core_pci_up(struct bcma_bus *bus);
-extern void bcma_core_pci_down(struct bcma_bus *bus);
++#ifdef CONFIG_BCMA_DRIVER_PCI
extern void bcma_core_pci_power_save(struct bcma_bus *bus, bool up);
++#else
++static inline void bcma_core_pci_power_save(struct bcma_bus *bus, bool up)
++{
++}
++#endif
extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev);
+ extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev);
--- a/include/linux/bcma/bcma_driver_pcie2.h
+++ b/include/linux/bcma/bcma_driver_pcie2.h
@@ -143,6 +143,8 @@
#endif /* LINUX_BCMA_DRIVER_PCIE2_H_ */
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
-@@ -1,6 +1,6 @@
- config BCMA_POSSIBLE
- bool
-- depends on HAS_IOMEM && HAS_DMA
-+ depends on HAS_IOMEM && HAS_DMA && PCI
- default y
-
- menu "Broadcom specific AMBA"
@@ -26,6 +26,7 @@ config BCMA_HOST_PCI_POSSIBLE
config BCMA_HOST_PCI
bool "Support for BCMA on PCI-host bus"
If unsure, say N
-+# TODO: make it depend on PCI when ready
+config BCMA_DRIVER_PCI
-+ bool
++ bool "BCMA Broadcom PCI core driver"
++ depends on BCMA && PCI
+ default y
+ help
+ BCMA bus may have many versions of PCIe core. This driver
u32 bcma_pmu_get_alp_clock(struct bcma_drv_cc *cc);
u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc);
-@@ -101,6 +107,14 @@ static inline void __exit bcma_host_soc_
+@@ -100,7 +106,35 @@ static inline void __exit bcma_host_soc_
+ #endif /* CONFIG_BCMA_HOST_SOC && CONFIG_OF */
/* driver_pci.c */
++#ifdef CONFIG_BCMA_DRIVER_PCI
u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address);
+void bcma_core_pci_early_init(struct bcma_drv_pci *pc);
+void bcma_core_pci_init(struct bcma_drv_pci *pc);
+void bcma_core_pci_up(struct bcma_drv_pci *pc);
+void bcma_core_pci_down(struct bcma_drv_pci *pc);
++#else
++static inline void bcma_core_pci_early_init(struct bcma_drv_pci *pc)
++{
++ WARN_ON(pc->core->bus->hosttype == BCMA_HOSTTYPE_PCI);
++}
++static inline void bcma_core_pci_init(struct bcma_drv_pci *pc)
++{
++ /* Initialization is required for PCI hosted bus */
++ WARN_ON(pc->core->bus->hosttype == BCMA_HOSTTYPE_PCI);
++}
++#endif
+
+/* driver_pcie2.c */
++#ifdef CONFIG_BCMA_DRIVER_PCI
+void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2);
+void bcma_core_pcie2_up(struct bcma_drv_pcie2 *pcie2);
++#else
++static inline void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2)
++{
++ /* Initialization is required for PCI hosted bus */
++ WARN_ON(pcie2->core->bus->hosttype == BCMA_HOSTTYPE_PCI);
++}
++#endif
extern int bcma_chipco_watchdog_register(struct bcma_drv_cc *cc);
-@@ -117,6 +131,39 @@ static inline void bcma_core_pci_hostmod
+@@ -117,6 +151,39 @@ static inline void bcma_core_pci_hostmod
}
#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
extern int bcma_core_enable(struct bcma_device *core, u32 flags);
--- a/include/linux/bcma/bcma_driver_pci.h
+++ b/include/linux/bcma/bcma_driver_pci.h
-@@ -238,12 +238,6 @@ struct bcma_drv_pci {
+@@ -238,13 +238,13 @@ struct bcma_drv_pci {
#define pcicore_write16(pc, offset, val) bcma_write16((pc)->core, offset, val)
#define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val)
- struct bcma_device *core, bool enable);
-extern void bcma_core_pci_up(struct bcma_bus *bus);
-extern void bcma_core_pci_down(struct bcma_bus *bus);
++#ifdef CONFIG_BCMA_DRIVER_PCI
extern void bcma_core_pci_power_save(struct bcma_bus *bus, bool up);
++#else
++static inline void bcma_core_pci_power_save(struct bcma_bus *bus, bool up)
++{
++}
++#endif
extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev);
+ extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev);
--- a/include/linux/bcma/bcma_driver_pcie2.h
+++ b/include/linux/bcma/bcma_driver_pcie2.h
@@ -143,6 +143,8 @@
#endif /* LINUX_BCMA_DRIVER_PCIE2_H_ */
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
-@@ -1,6 +1,6 @@
- config BCMA_POSSIBLE
- bool
-- depends on HAS_IOMEM && HAS_DMA
-+ depends on HAS_IOMEM && HAS_DMA && PCI
- default y
-
- menu "Broadcom specific AMBA"
@@ -26,6 +26,7 @@ config BCMA_HOST_PCI_POSSIBLE
config BCMA_HOST_PCI
bool "Support for BCMA on PCI-host bus"
If unsure, say N
-+# TODO: make it depend on PCI when ready
+config BCMA_DRIVER_PCI
-+ bool
++ bool "BCMA Broadcom PCI core driver"
++ depends on BCMA && PCI
+ default y
+ help
+ BCMA bus may have many versions of PCIe core. This driver