help
This enables support for ARM Ltd Versatile board.
-config ARCH_AT91RM9200
- bool "Atmel AT91RM9200"
+config ARCH_AT91
+ bool "Atmel AT91"
help
- Say Y here if you intend to run this kernel on an Atmel
- AT91RM9200-based board.
+ This enables support for systems based on the Atmel AT91RM9200
+ and AT91SAM9xxx processors.
config ARCH_CLPS7500
bool "Cirrus CL-PS7500FE"
machine-$(CONFIG_ARCH_H720X) := h720x
machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
machine-$(CONFIG_ARCH_REALVIEW) := realview
- machine-$(CONFIG_ARCH_AT91RM9200) := at91rm9200
+ machine-$(CONFIG_ARCH_AT91) := at91rm9200
machine-$(CONFIG_ARCH_EP93XX) := ep93xx
machine-$(CONFIG_ARCH_PNX4008) := pnx4008
machine-$(CONFIG_ARCH_NETX) := netx
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-if ARCH_AT91RM9200
+if ARCH_AT91
+
+menu "Atmel AT91 System-on-Chip"
+
+comment "Atmel AT91 Processors"
+
+config ARCH_AT91RM9200
+ bool "AT91RM9200"
-menu "AT91RM9200 Implementations"
+config ARCH_AT91SAM9260
+ bool "AT91SAM9260"
+
+config ARCH_AT91SAM9261
+ bool "AT91SAM9261"
+
+# ----------------------------------------------------------
+
+if ARCH_AT91RM9200
comment "AT91RM9200 Board Type"
bool "Ajeco 1ARM Single Board Computer"
depends on ARCH_AT91RM9200
help
- Select this if you are using Ajeco's 1ARM Single Board Computer
+ Select this if you are using Ajeco's 1ARM Single Board Computer.
+ <http://www.ajeco.fi/products.htm>
config ARCH_AT91RM9200DK
bool "Atmel AT91RM9200-DK Development board"
depends on ARCH_AT91RM9200
help
- Select this if you are using Atmel's AT91RM9200-DK Development board
+ Select this if you are using Atmel's AT91RM9200-DK Development board.
+ (Discontinued)
+
config MACH_AT91RM9200EK
bool "Atmel AT91RM9200-EK Evaluation Kit"
depends on ARCH_AT91RM9200
help
- Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit
+ Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
config MACH_CSB337
- bool "Cogent CSB337 board"
+ bool "Cogent CSB337"
depends on ARCH_AT91RM9200
help
- Select this if you are using Cogent's CSB337 board
+ Select this if you are using Cogent's CSB337 board.
+ <http://www.cogcomp.com/csb_csb337.htm>
config MACH_CSB637
- bool "Cogent CSB637 board"
+ bool "Cogent CSB637"
depends on ARCH_AT91RM9200
help
- Select this if you are using Cogent's CSB637 board
+ Select this if you are using Cogent's CSB637 board.
+ <http://www.cogcomp.com/csb_csb637.htm>
config MACH_CARMEVA
- bool "Conitec's ARM&EVA"
+ bool "Conitec ARM&EVA"
depends on ARCH_AT91RM9200
help
- Select this if you are using Conitec's AT91RM9200-MCU-Module
+ Select this if you are using Conitec's AT91RM9200-MCU-Module.
+ <http://www.conitec.net/english/linuxboard.htm>
-config MACH_KB9200
- bool "KwikByte's KB920x"
+config MACH_ATEB9200
+ bool "Embest ATEB9200"
depends on ARCH_AT91RM9200
help
- Select this if you are using KwikByte's KB920x board
+ Select this if you are using Embest's ATEB9200 board.
+ <http://www.embedinfo.com/english/product/ATEB9200.asp>
-config MACH_ATEB9200
- bool "Embest's ATEB9200"
+config MACH_KB9200
+ bool "KwikByte KB920x"
depends on ARCH_AT91RM9200
help
- Select this if you are using Embest's ATEB9200 board
+ Select this if you are using KwikByte's KB920x board.
+ <http://kwikbyte.com/KB9202_description_new.htm>
config MACH_KAFA
bool "Sperry-Sun KAFA board"
depends on ARCH_AT91RM9200
help
- Select this if you are using Sperry-Sun's KAFA board
+ Select this if you are using Sperry-Sun's KAFA board.
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9260
+
+comment "AT91SAM9260 Board Type"
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9261
+
+comment "AT91SAM9261 Board Type"
+
+endif
+
+# ----------------------------------------------------------
-comment "AT91RM9200 Feature Selections"
+comment "AT91 Feature Selections"
config AT91_PROGRAMMABLE_CLOCKS
bool "Programmable Clocks"
# Makefile for the linux kernel.
#
-obj-y := clock.o irq.o time.o gpio.o common.o devices.o
+obj-y := clock.o irq.o gpio.o devices.o
obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_PM) += pm.o
-# Board-specific support
+# CPU-specific support
+obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o
+obj-$(CONFIG_ARCH_AT91SAM9260) +=
+obj-$(CONFIG_ARCH_AT91SAM9261) +=
+
+# AT91RM9200 Board-specific support
obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o
obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o
obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
obj-$(CONFIG_MACH_KAFA) += board-kafa.o
+# AT91SAM9260 board-specific support
+
+# AT91SAM9261 board-specific support
+
# LEDs support
led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o
led-$(CONFIG_MACH_AT91RM9200EK) += leds.o
--- /dev/null
+/*
+ * arch/arm/mach-at91rm9200/at91rm9200.c
+ *
+ * Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/hardware.h>
+#include "generic.h"
+
+static struct map_desc at91rm9200_io_desc[] __initdata = {
+ {
+ .virtual = AT91_VA_BASE_SYS,
+ .pfn = __phys_to_pfn(AT91_BASE_SYS),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_VA_BASE_SPI,
+ .pfn = __phys_to_pfn(AT91_BASE_SPI),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_VA_BASE_SSC2,
+ .pfn = __phys_to_pfn(AT91_BASE_SSC2),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_VA_BASE_SSC1,
+ .pfn = __phys_to_pfn(AT91_BASE_SSC1),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_VA_BASE_SSC0,
+ .pfn = __phys_to_pfn(AT91_BASE_SSC0),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_VA_BASE_US3,
+ .pfn = __phys_to_pfn(AT91_BASE_US3),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_VA_BASE_US2,
+ .pfn = __phys_to_pfn(AT91_BASE_US2),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_VA_BASE_US1,
+ .pfn = __phys_to_pfn(AT91_BASE_US1),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_VA_BASE_US0,
+ .pfn = __phys_to_pfn(AT91_BASE_US0),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_VA_BASE_EMAC,
+ .pfn = __phys_to_pfn(AT91_BASE_EMAC),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_VA_BASE_TWI,
+ .pfn = __phys_to_pfn(AT91_BASE_TWI),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_VA_BASE_MCI,
+ .pfn = __phys_to_pfn(AT91_BASE_MCI),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_VA_BASE_UDP,
+ .pfn = __phys_to_pfn(AT91_BASE_UDP),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_VA_BASE_TCB1,
+ .pfn = __phys_to_pfn(AT91_BASE_TCB1),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_VA_BASE_TCB0,
+ .pfn = __phys_to_pfn(AT91_BASE_TCB0),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_SRAM_VIRT_BASE,
+ .pfn = __phys_to_pfn(AT91_SRAM_BASE),
+ .length = AT91_SRAM_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init at91rm9200_map_io(void)
+{
+ iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
+}
+
--- /dev/null
+/*
+ * linux/arch/arm/mach-at91rm9200/at91rm9200_time.c
+ *
+ * Copyright (C) 2003 SAN People
+ * Copyright (C) 2003 ATMEL
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach/time.h>
+
+static unsigned long last_crtr;
+
+/*
+ * The ST_CRTR is updated asynchronously to the master clock. It is therefore
+ * necessary to read it twice (with the same value) to ensure accuracy.
+ */
+static inline unsigned long read_CRTR(void) {
+ unsigned long x1, x2;
+
+ do {
+ x1 = at91_sys_read(AT91_ST_CRTR);
+ x2 = at91_sys_read(AT91_ST_CRTR);
+ } while (x1 != x2);
+
+ return x1;
+}
+
+/*
+ * Returns number of microseconds since last timer interrupt. Note that interrupts
+ * will have been disabled by do_gettimeofday()
+ * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
+ * 'tick' is usecs per jiffy (linux/timex.h).
+ */
+static unsigned long at91rm9200_gettimeoffset(void)
+{
+ unsigned long elapsed;
+
+ elapsed = (read_CRTR() - last_crtr) & AT91_ST_ALMV;
+
+ return (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH;
+}
+
+/*
+ * IRQ handler for the timer.
+ */
+static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ if (at91_sys_read(AT91_ST_SR) & AT91_ST_PITS) { /* This is a shared interrupt */
+ write_seqlock(&xtime_lock);
+
+ while (((read_CRTR() - last_crtr) & AT91_ST_ALMV) >= LATCH) {
+ timer_tick(regs);
+ last_crtr = (last_crtr + LATCH) & AT91_ST_ALMV;
+ }
+
+ write_sequnlock(&xtime_lock);
+
+ return IRQ_HANDLED;
+ }
+ else
+ return IRQ_NONE; /* not handled */
+}
+
+static struct irqaction at91rm9200_timer_irq = {
+ .name = "at91_tick",
+ .flags = SA_SHIRQ | SA_INTERRUPT | SA_TIMER,
+ .handler = at91rm9200_timer_interrupt
+};
+
+void at91rm9200_timer_reset(void)
+{
+ last_crtr = 0;
+
+ /* Real time counter incremented every 30.51758 microseconds */
+ at91_sys_write(AT91_ST_RTMR, 1);
+
+ /* Set Period Interval timer */
+ at91_sys_write(AT91_ST_PIMR, LATCH);
+
+ /* Enable Period Interval Timer interrupt */
+ at91_sys_write(AT91_ST_IER, AT91_ST_PITS);
+}
+
+/*
+ * Set up timer interrupt.
+ */
+void __init at91rm9200_timer_init(void)
+{
+ /* Disable all timer interrupts */
+ at91_sys_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS);
+ (void) at91_sys_read(AT91_ST_SR); /* Clear any pending interrupts */
+
+ /* Make IRQs happen for the system timer */
+ setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq);
+
+ /* Change the kernel's 'tick' value to 10009 usec. (the default is 10000) */
+ tick_usec = (LATCH * 1000000) / CLOCK_TICK_RATE;
+
+ /* Initialize and enable the timer interrupt */
+ at91rm9200_timer_reset();
+}
+
+#ifdef CONFIG_PM
+static void at91rm9200_timer_suspend(void)
+{
+ /* disable Period Interval Timer interrupt */
+ at91_sys_write(AT91_ST_IDR, AT91_ST_PITS);
+}
+#else
+#define at91rm9200_timer_suspend NULL
+#endif
+
+struct sys_timer at91rm9200_timer = {
+ .init = at91rm9200_timer_init,
+ .offset = at91rm9200_gettimeoffset,
+ .suspend = at91rm9200_timer_suspend,
+ .resume = at91rm9200_timer_reset,
+};
+
+++ /dev/null
-/*
- * arch/arm/mach-at91rm9200/common.c
- *
- * Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/config.h>
-#include <linux/module.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <asm/hardware.h>
-#include "generic.h"
-
-static struct map_desc at91rm9200_io_desc[] __initdata = {
- {
- .virtual = AT91_VA_BASE_SYS,
- .pfn = __phys_to_pfn(AT91_BASE_SYS),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_VA_BASE_SPI,
- .pfn = __phys_to_pfn(AT91_BASE_SPI),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_VA_BASE_SSC2,
- .pfn = __phys_to_pfn(AT91_BASE_SSC2),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_VA_BASE_SSC1,
- .pfn = __phys_to_pfn(AT91_BASE_SSC1),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_VA_BASE_SSC0,
- .pfn = __phys_to_pfn(AT91_BASE_SSC0),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_VA_BASE_US3,
- .pfn = __phys_to_pfn(AT91_BASE_US3),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_VA_BASE_US2,
- .pfn = __phys_to_pfn(AT91_BASE_US2),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_VA_BASE_US1,
- .pfn = __phys_to_pfn(AT91_BASE_US1),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_VA_BASE_US0,
- .pfn = __phys_to_pfn(AT91_BASE_US0),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_VA_BASE_EMAC,
- .pfn = __phys_to_pfn(AT91_BASE_EMAC),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_VA_BASE_TWI,
- .pfn = __phys_to_pfn(AT91_BASE_TWI),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_VA_BASE_MCI,
- .pfn = __phys_to_pfn(AT91_BASE_MCI),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_VA_BASE_UDP,
- .pfn = __phys_to_pfn(AT91_BASE_UDP),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_VA_BASE_TCB1,
- .pfn = __phys_to_pfn(AT91_BASE_TCB1),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_VA_BASE_TCB0,
- .pfn = __phys_to_pfn(AT91_BASE_TCB0),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_SRAM_VIRT_BASE,
- .pfn = __phys_to_pfn(AT91_SRAM_BASE),
- .length = AT91_SRAM_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-void __init at91rm9200_map_io(void)
-{
- iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
-}
-
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91rm9200/time.c
- *
- * Copyright (C) 2003 SAN People
- * Copyright (C) 2003 ATMEL
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/time.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/mach/time.h>
-
-static unsigned long last_crtr;
-
-/*
- * The ST_CRTR is updated asynchronously to the master clock. It is therefore
- * necessary to read it twice (with the same value) to ensure accuracy.
- */
-static inline unsigned long read_CRTR(void) {
- unsigned long x1, x2;
-
- do {
- x1 = at91_sys_read(AT91_ST_CRTR);
- x2 = at91_sys_read(AT91_ST_CRTR);
- } while (x1 != x2);
-
- return x1;
-}
-
-/*
- * Returns number of microseconds since last timer interrupt. Note that interrupts
- * will have been disabled by do_gettimeofday()
- * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
- * 'tick' is usecs per jiffy (linux/timex.h).
- */
-static unsigned long at91rm9200_gettimeoffset(void)
-{
- unsigned long elapsed;
-
- elapsed = (read_CRTR() - last_crtr) & AT91_ST_ALMV;
-
- return (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH;
-}
-
-/*
- * IRQ handler for the timer.
- */
-static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
- if (at91_sys_read(AT91_ST_SR) & AT91_ST_PITS) { /* This is a shared interrupt */
- write_seqlock(&xtime_lock);
-
- while (((read_CRTR() - last_crtr) & AT91_ST_ALMV) >= LATCH) {
- timer_tick(regs);
- last_crtr = (last_crtr + LATCH) & AT91_ST_ALMV;
- }
-
- write_sequnlock(&xtime_lock);
-
- return IRQ_HANDLED;
- }
- else
- return IRQ_NONE; /* not handled */
-}
-
-static struct irqaction at91rm9200_timer_irq = {
- .name = "at91_tick",
- .flags = SA_SHIRQ | SA_INTERRUPT | SA_TIMER,
- .handler = at91rm9200_timer_interrupt
-};
-
-void at91rm9200_timer_reset(void)
-{
- last_crtr = 0;
-
- /* Real time counter incremented every 30.51758 microseconds */
- at91_sys_write(AT91_ST_RTMR, 1);
-
- /* Set Period Interval timer */
- at91_sys_write(AT91_ST_PIMR, LATCH);
-
- /* Enable Period Interval Timer interrupt */
- at91_sys_write(AT91_ST_IER, AT91_ST_PITS);
-}
-
-/*
- * Set up timer interrupt.
- */
-void __init at91rm9200_timer_init(void)
-{
- /* Disable all timer interrupts */
- at91_sys_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS);
- (void) at91_sys_read(AT91_ST_SR); /* Clear any pending interrupts */
-
- /* Make IRQs happen for the system timer */
- setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq);
-
- /* Change the kernel's 'tick' value to 10009 usec. (the default is 10000) */
- tick_usec = (LATCH * 1000000) / CLOCK_TICK_RATE;
-
- /* Initialize and enable the timer interrupt */
- at91rm9200_timer_reset();
-}
-
-#ifdef CONFIG_PM
-static void at91rm9200_timer_suspend(void)
-{
- /* disable Period Interval Timer interrupt */
- at91_sys_write(AT91_ST_IDR, AT91_ST_PITS);
-}
-#else
-#define at91rm9200_timer_suspend NULL
-#endif
-
-struct sys_timer at91rm9200_timer = {
- .init = at91rm9200_timer_init,
- .offset = at91rm9200_gettimeoffset,
- .suspend = at91rm9200_timer_suspend,
- .resume = at91rm9200_timer_reset,
-};
-
# ARM926T
config CPU_ARM926T
bool "Support ARM926T processor"
- depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412
- default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412
+ depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261
+ default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261
select CPU_32v5
select CPU_ABRT_EV5TJ
select CPU_CACHE_VIVT
projects / openwrt / staging / blogic.git / commitdiff