bmips: add support for Comtrend AR-5381u

The Comtrend AR-5381u is a wifi fast ethernet router, 2.4 GHz single band with
two internal antennas.

Hardware:
 - SoC: Broadcom BCM6328
 - CPU: single core BMIPS4350 @ 320Mhz
 - RAM: 64 MB DDR
 - Flash: 16 MB SPI NOR
 - Ethernet LAN: 4x 100Mbit
 - Wifi 2.4 GHz: miniPCI Broadcom BCM43225 802.11bgn
 - USB: 1x 2.0
 - Buttons: 1x (reset)
 - LEDs: yes
 - UART: yes

Installation via CFE web UI:
  1. Power off the router.
  2. Press reset button near the power switch.
  3. Keep it pressed while powering up during ~20+ seconds.
  4. Browse to http://192.168.1.1 and upload the firmware.
  5. Wait a few minutes for it to finish.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
(cherry picked from commit bcdf861519)

diff --git a/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network b/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network
index 792926fcf27a905acc51e427a16a49f05a6ee5b3..c9c704067e9ebba6b0d23b989de220cc3275f2dc 100644 (file)
--- a/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network
+++ b/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network
@@ -5,6 +5,7 @@
 board_config_update
 
 case "$(board_name)" in
+comtrend,ar-5381u |\
 comtrend,ar-5387un)
        ucidef_set_bridge_device switch
        ucidef_set_interface_lan "lan1 lan2 lan3 lan4"

diff --git a/target/linux/bmips/bcm6328/base-files/etc/uci-defaults/09_fix_crc b/target/linux/bmips/bcm6328/base-files/etc/uci-defaults/09_fix_crc
index 3909947be6de41b1179bb663a5e4291c7f2de2de..21f18b4b819502f3f75ea7c6ea6d2eb6619a6dc4 100644 (file)
--- a/target/linux/bmips/bcm6328/base-files/etc/uci-defaults/09_fix_crc
+++ b/target/linux/bmips/bcm6328/base-files/etc/uci-defaults/09_fix_crc
@@ -3,6 +3,7 @@
 . /lib/functions.sh
 
 case "$(board_name)" in
+comtrend,ar-5381u |\
 comtrend,ar-5387un)
        mtd fixtrx firmware
        ;;

diff --git a/target/linux/bmips/dts/bcm6328-comtrend-ar-5381u.dts b/target/linux/bmips/dts/bcm6328-comtrend-ar-5381u.dts
new file mode 100644 (file)
index 0000000..7499e70
--- /dev/null
+++ b/target/linux/bmips/dts/bcm6328-comtrend-ar-5381u.dts
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "bcm6328.dtsi"
+
+/ {
+       model = "Comtrend AR-5381u";
+       compatible = "comtrend,ar-5381u", "brcm,bcm6328";
+
+       aliases {
+               led-boot = &led_power_green;
+               led-failsafe = &led_alarm_red;
+               led-running = &led_power_green;
+               led-upgrade = &led_power_green;
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               poll-interval = <100>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       bcm43225-sprom {
+               compatible = "brcm,bcma-sprom";
+
+               pci-bus = <1>;
+               pci-dev = <0>;
+
+               nvmem-cells = <&macaddr_cfe_6a0>;
+               nvmem-cell-names = "mac-address";
+               mac-address-increment = <1>;
+
+               brcm,sprom = "brcm/bcm43225-sprom.bin";
+               brcm,sprom-fixups = <97 0xfee5>,
+                                   <98 0x157c>,
+                                   <99 0xfae7>,
+                                   <113 0xfefa>,
+                                   <114 0x15d6>,
+                                   <115 0xfaf8>;
+       };
+};
+
+&ehci {
+       status = "okay";
+};
+
+&ethernet {
+       status = "okay";
+
+       nvmem-cells = <&macaddr_cfe_6a0>;
+       nvmem-cell-names = "mac-address";
+};
+
+&hsspi {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <16666667>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+               reg = <0>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       cfe: partition@0 {
+                               reg = <0x000000 0x010000>;
+                               label = "cfe";
+                               read-only;
+                       };
+
+                       partition@10000 {
+                               compatible = "brcm,bcm963xx-imagetag";
+                               reg = <0x010000 0xfe0000>;
+                               label = "firmware";
+                       };
+
+                       partition@ff0000 {
+                               reg = <0xff0000 0x010000>;
+                               label = "nvram";
+                       };
+               };
+       };
+};
+
+&leds {
+       status = "okay";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_leds>;
+
+       led_alarm_red: led@2 {
+               reg = <2>;
+               active-low;
+               label = "red:alarm";
+               panic-indicator;
+       };
+
+       led@3 {
+               reg = <3>;
+               active-low;
+               label = "green:internet";
+       };
+
+       led_power_green: led@4 {
+               reg = <4>;
+               active-low;
+               label = "green:power";
+       };
+};
+
+&ohci {
+       status = "okay";
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pinctrl {
+       pinctrl_leds: leds {
+               function = "led";
+               pins = "gpio2", "gpio3", "gpio4";
+       };
+};
+
+&switch0 {
+       ports {
+               port@0 {
+                       reg = <0>;
+                       label = "lan1";
+
+                       phy-handle = <&phy1>;
+                       phy-mode = "mii";
+               };
+
+               port@1 {
+                       reg = <1>;
+                       label = "lan2";
+
+                       phy-handle = <&phy2>;
+                       phy-mode = "mii";
+               };
+
+               port@2 {
+                       reg = <2>;
+                       label = "lan3";
+
+                       phy-handle = <&phy3>;
+                       phy-mode = "mii";
+               };
+
+               port@3 {
+                       reg = <3>;
+                       label = "lan4";
+
+                       phy-handle = <&phy4>;
+                       phy-mode = "mii";
+               };
+       };
+};
+
+&uart0 {
+       status = "okay";
+};
+
+&usbh {
+       status = "okay";
+};
+
+&cfe {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_cfe_6a0: macaddr@6a0 {
+               reg = <0x6a0 0x6>;
+       };
+};

diff --git a/target/linux/bmips/image/bcm6328.mk b/target/linux/bmips/image/bcm6328.mk
index b3cef51a71be57fba5a97c2583211339f9fc58ae..dfa134df94673a23c7d60d1a306492a84a72b4f0 100644 (file)
--- a/target/linux/bmips/image/bcm6328.mk
+++ b/target/linux/bmips/image/bcm6328.mk
@@ -1,5 +1,18 @@
 # SPDX-License-Identifier: GPL-2.0-or-later
 
+define Device/comtrend_ar-5381u
+  $(Device/bcm63xx-cfe)
+  DEVICE_VENDOR := Comtrend
+  DEVICE_MODEL := AR-5381u
+  CHIP_ID := 6328
+  CFE_BOARD_ID := 96328A-1241N
+  FLASH_MB := 16
+  DEVICE_PACKAGES += $(USB2_PACKAGES) \
+    $(B43_PACKAGES) broadcom-43225-sprom \
+    kmod-leds-bcm6328
+endef
+TARGET_DEVICES += comtrend_ar-5381u
+
 define Device/comtrend_ar-5387un
   $(Device/bcm63xx-cfe)
   DEVICE_VENDOR := Comtrend