*/
if (!host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD12))
mode |= SDHCI_TRNS_AUTO_CMD12;
+ else if (host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD23)) {
+ mode |= SDHCI_TRNS_AUTO_CMD23;
+ sdhci_writel(host, host->mrq->sbc->arg, SDHCI_ARGUMENT2);
+ }
}
+
if (data->flags & MMC_DATA_READ)
mode |= SDHCI_TRNS_READ;
if (host->flags & SDHCI_REQ_USE_DMA)
host->mrq = mrq;
}
- if (mrq->sbc)
+ if (mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23))
sdhci_send_command(host, mrq->sbc);
else
sdhci_send_command(host, mrq->cmd);
if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12)
host->flags |= SDHCI_AUTO_CMD12;
+ /* Auto-CMD23 stuff only works in ADMA or PIO. */
+ if ((host->version == SDHCI_SPEC_300) &&
+ ((host->flags & SDHCI_USE_ADMA) ||
+ !(host->flags & SDHCI_REQ_USE_DMA))) {
+ host->flags |= SDHCI_AUTO_CMD23;
+ DBG("%s: Auto-CMD23 available\n", mmc_hostname(mmc));
+ } else {
+ DBG("%s: Auto-CMD23 unavailable\n", mmc_hostname(mmc));
+ }
+
/*
* A controller may support 8-bit width, but the board itself
* might not have the pins brought out. Boards that support
*/
#define SDHCI_DMA_ADDRESS 0x00
+#define SDHCI_ARGUMENT2 SDHCI_DMA_ADDRESS
#define SDHCI_BLOCK_SIZE 0x04
#define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
#define SDHCI_TRNS_DMA 0x01
#define SDHCI_TRNS_BLK_CNT_EN 0x02
#define SDHCI_TRNS_AUTO_CMD12 0x04
+#define SDHCI_TRNS_AUTO_CMD23 0x08
#define SDHCI_TRNS_READ 0x10
#define SDHCI_TRNS_MULTI 0x20
#define SDHCI_SDR50_NEEDS_TUNING (1<<4) /* SDR50 needs tuning */
#define SDHCI_NEEDS_RETUNING (1<<5) /* Host needs retuning */
#define SDHCI_AUTO_CMD12 (1<<6) /* Auto CMD12 support */
+#define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */
unsigned int version; /* SDHCI spec. version */