ar71xx: enable AR7240 DSA driver on 2.6.33 as well
authorGabor Juhos <juhosg@openwrt.org>
Mon, 8 Mar 2010 14:38:43 +0000 (14:38 +0000)
committerGabor Juhos <juhosg@openwrt.org>
Mon, 8 Mar 2010 14:38:43 +0000 (14:38 +0000)
SVN-Revision: 20059

target/linux/ar71xx/config-2.6.33
target/linux/ar71xx/patches-2.6.33/122-dsa-add-qinq-tagging-format.patch [new file with mode: 0644]
target/linux/ar71xx/patches-2.6.33/123-dsa-add-ar7240-built-in-switch-support.patch [new file with mode: 0644]

index 14e57685915a247dbe54be65a70959375c7238c9..1a8eaadba09bdd0a6835f0fb24252812a2a33fc7 100644 (file)
@@ -212,6 +212,7 @@ CONFIG_MTD_WRT160NL_PARTS=y
 # CONFIG_MUTEX_SPIN_ON_OWNER is not set
 CONFIG_MYLOADER=y
 CONFIG_NET_DSA=y
+CONFIG_NET_DSA_AR7240=y
 CONFIG_NET_DSA_MV88E6060=y
 CONFIG_NET_DSA_MV88E6063=y
 # CONFIG_NET_DSA_MV88E6123_61_65 is not set
@@ -220,6 +221,7 @@ CONFIG_NET_DSA_MV88E6063=y
 # CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
 # CONFIG_NET_DSA_TAG_DSA is not set
 # CONFIG_NET_DSA_TAG_EDSA is not set
+CONFIG_NET_DSA_TAG_QINQ=y
 CONFIG_NET_DSA_TAG_TRAILER=y
 # CONFIG_NO_IOPORT is not set
 # CONFIG_NXP_STB220 is not set
diff --git a/target/linux/ar71xx/patches-2.6.33/122-dsa-add-qinq-tagging-format.patch b/target/linux/ar71xx/patches-2.6.33/122-dsa-add-qinq-tagging-format.patch
new file mode 100644 (file)
index 0000000..dc03fd6
--- /dev/null
@@ -0,0 +1,79 @@
+--- a/include/linux/if_ether.h
++++ b/include/linux/if_ether.h
+@@ -81,6 +81,7 @@
+ #define ETH_P_1588    0x88F7          /* IEEE 1588 Timesync */
+ #define ETH_P_FCOE    0x8906          /* Fibre Channel over Ethernet  */
+ #define ETH_P_FIP     0x8914          /* FCoE Initialization Protocol */
++#define ETH_P_QINQ    0x9100          /* QinQ VLAN Stacking Protocol */
+ #define ETH_P_EDSA    0xDADA          /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
+ /*
+--- a/net/dsa/dsa_priv.h
++++ b/net/dsa/dsa_priv.h
+@@ -174,6 +174,9 @@ netdev_tx_t dsa_xmit(struct sk_buff *skb
+ /* tag_edsa.c */
+ netdev_tx_t edsa_xmit(struct sk_buff *skb, struct net_device *dev);
++/* tag_qinq.c */
++netdev_tx_t qinq_xmit(struct sk_buff *skb, struct net_device *dev);
++
+ /* tag_trailer.c */
+ netdev_tx_t trailer_xmit(struct sk_buff *skb, struct net_device *dev);
+--- a/net/dsa/Kconfig
++++ b/net/dsa/Kconfig
+@@ -23,6 +23,10 @@ config NET_DSA_TAG_TRAILER
+       bool
+       default n
++config NET_DSA_TAG_QINQ
++      bool
++      default y
++
+ # switch drivers
+ config NET_DSA_MV88E6XXX
+--- a/net/dsa/Makefile
++++ b/net/dsa/Makefile
+@@ -1,6 +1,7 @@
+ # tagging formats
+ obj-$(CONFIG_NET_DSA_TAG_DSA) += tag_dsa.o
+ obj-$(CONFIG_NET_DSA_TAG_EDSA) += tag_edsa.o
++obj-$(CONFIG_NET_DSA_TAG_QINQ) += tag_qinq.o
+ obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o
+ # switch drivers
+--- a/net/dsa/slave.c
++++ b/net/dsa/slave.c
+@@ -321,6 +321,19 @@ static const struct net_device_ops edsa_
+       .ndo_do_ioctl           = dsa_slave_ioctl,
+ };
+ #endif
++#ifdef CONFIG_NET_DSA_TAG_QINQ
++static const struct net_device_ops qinq_netdev_ops = {
++      .ndo_init               = dsa_slave_init,
++      .ndo_open               = dsa_slave_open,
++      .ndo_stop               = dsa_slave_close,
++      .ndo_start_xmit         = qinq_xmit,
++      .ndo_change_rx_flags    = dsa_slave_change_rx_flags,
++      .ndo_set_rx_mode        = dsa_slave_set_rx_mode,
++      .ndo_set_multicast_list = dsa_slave_set_rx_mode,
++      .ndo_set_mac_address    = dsa_slave_set_mac_address,
++      .ndo_do_ioctl           = dsa_slave_ioctl,
++};
++#endif
+ #ifdef CONFIG_NET_DSA_TAG_TRAILER
+ static const struct net_device_ops trailer_netdev_ops = {
+       .ndo_init               = dsa_slave_init,
+@@ -366,6 +379,11 @@ dsa_slave_create(struct dsa_switch *ds, 
+               slave_dev->netdev_ops = &edsa_netdev_ops;
+               break;
+ #endif
++#ifdef CONFIG_NET_DSA_TAG_QINQ
++      case htons(ETH_P_QINQ):
++              slave_dev->netdev_ops = &qinq_netdev_ops;
++              break;
++#endif
+ #ifdef CONFIG_NET_DSA_TAG_TRAILER
+       case htons(ETH_P_TRAILER):
+               slave_dev->netdev_ops = &trailer_netdev_ops;
diff --git a/target/linux/ar71xx/patches-2.6.33/123-dsa-add-ar7240-built-in-switch-support.patch b/target/linux/ar71xx/patches-2.6.33/123-dsa-add-ar7240-built-in-switch-support.patch
new file mode 100644 (file)
index 0000000..50e6e5d
--- /dev/null
@@ -0,0 +1,28 @@
+--- a/net/dsa/Kconfig
++++ b/net/dsa/Kconfig
+@@ -29,6 +29,15 @@ config NET_DSA_TAG_QINQ
+ # switch drivers
++config NET_DSA_AR7240
++      bool "Atheros AR7240 built-in ethernet switch support"
++      depends on ATHEROS_AR71XX
++      default n
++      select NET_DSA_TAG_QINQ
++      ---help---
++        This enables support for the built-in ethernet switch of the
++        Atheros AR7240 SoC.
++
+ config NET_DSA_MV88E6XXX
+       bool
+       default n
+--- a/net/dsa/Makefile
++++ b/net/dsa/Makefile
+@@ -5,6 +5,7 @@ obj-$(CONFIG_NET_DSA_TAG_QINQ) += tag_qi
+ obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o
+ # switch drivers
++obj-$(CONFIG_NET_DSA_AR7240) += ar7240.o
+ obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o
+ obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
+ obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o