ramips: add MPR-A1 support

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37568

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index cc426b74c606c56fa706a24bff1a0598fc4fcb3a..f8e97875aa55cd97ca7dbd21e7b82c619633824a 100755 (executable)
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -55,6 +55,9 @@ get_status_led() {
        mofi3500-3gn)
                status_led="mofi3500-3gn:green:status"
                ;;
+       mpr-a1)
+               status_led="mpr-a1:red:power"
+               ;;
        mpr-a2)
                status_led="mpr-a2:red:power"
                ;;

diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index b3ca002d0947f1a42c24e67b72d11c6174469a9c..9e9e09be3d6f8c0060defc8d3eafa33635be0af6 100644 (file)
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -78,6 +78,7 @@ case "$FIRMWARE" in
        freestation5 | \
        hw550-3g | \
        mofi3500-3gn | \
+       mpr-a1 | \
        mpr-a2 | \
        pwh2004 | \
        nbg-419n | \

diff --git a/target/linux/ramips/base-files/etc/uci-defaults/01_leds b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
index 036d311d9b4851b846e03da34a94b846af3318e8..7f69231da9b3703a4d88b2f48346975ff22b8fae 100755 (executable)
--- a/target/linux/ramips/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
@@ -94,6 +94,9 @@ case $board in
        mofi3500-3gn)
                set_usb_led "mofi3500-3gn:green:usb"
                ;;
+       mpr-a1)
+               set_wifi_led "mpr-a1:blue:system"
+               ;;
        mpr-a2)
                set_wifi_led "mpr-a2:blue:system"
                ;;

diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index 2d833b31a6a2edaece21391e98de945eab353106..6877588a4584e1a71056ecf822db4f7475145584 100755 (executable)
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -173,6 +173,7 @@ ramips_setup_macs()
        broadway | \
        dir-620-d1 | \
        f5d8235-v1 | \
+       mpr-a1 | \
        mpr-a2 | \
        mzk-w300nh2 | \
        nw718 | \

diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
index 6f153aac46673a25dedad6f2b7d6d6aa43b6efc2..aacec25fe381c65f8855ce8cf1c7a3e413c48ab5 100644 (file)
--- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
@@ -26,6 +26,7 @@ preinit_set_mac_address() {
        dir-620-a1 |\
        esr-9753 |\
        freestation5 |\
+       mpr-a1 | \
        mpr-a2 | \
        nw718 |\
        psr-680w |\

diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index cb6c10f76fd152bca3c559e7a3d97d33656044f8..b1ecc8dfb9eb25d519ab8da1c42e0e192391a108 100755 (executable)
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -118,6 +118,9 @@ ramips_board_detect() {
        *"MoFi Network MOFI3500-3GN")
                name="mofi3500-3gn"
                ;;
+       *"HAME MPR-A1")
+               name="mpr-a1"
+               ;;
        *"HAME MPR-A2")
                name="mpr-a2"
                ;;

diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index ef2aa9969078a73bc1150fc8061fba0cb3fff72c..1d867a73f56a4abcb2e8f326b6821833c337ee13 100755 (executable)
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -45,6 +45,7 @@ platform_check_image() {
        hw550-3g | \
        hg255d | \
        mofi3500-3gn | \
+       mpr-a1 | \
        mpr-a2 | \
        mzk-w300nh2 | \
        nbg-419n | \

diff --git a/target/linux/ramips/dts/MPRA1.dts b/target/linux/ramips/dts/MPRA1.dts
new file mode 100644 (file)
index 0000000..44363ef
--- /dev/null
+++ b/target/linux/ramips/dts/MPRA1.dts
@@ -0,0 +1,117 @@
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+       compatible = "MPRA1", "ralink,rt5350-soc";
+       model = "HAME MPR-A1";
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmux = "spi", "uartlite", "sdram";
+                       ralink,gpiomux = "jtag", "i2c", "mdio", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+               spi@b00 {
+                       status = "okay";
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "s25fl064k";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80", "s25fl064k";
+                               spi-max-frequency = <10000000>;
+
+                               partition@0 {
+                                       label = "u-boot";
+                                       reg = <0x0 0x30000>;
+                                       read-only;
+                               };
+
+                               partition@30000 {
+                                       label = "u-boot-env";
+                                       reg = <0x30000 0x10000>;
+                                       read-only;
+                               };
+
+                               factory: partition@40000 {
+                                       label = "factory";
+                                       reg = <0x40000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@50000 {
+                                       label = "firmware";
+                                       reg = <0x50000 0x3b0000>;
+                               };
+                       };
+               };
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x2f>;
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       ehci@101c0000 {
+               status = "okay";
+       };
+
+       ohci@101c1000 {
+               status = "okay";
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               system {
+                       label = "mpr-a1:blue:system";
+                       gpios = <&gpio0 20 1>;
+               };
+               power {
+                       label = "mpr-a1:red:power";
+                       gpios = <&gpio0 17 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               wps {
+                       label = "reset";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x198>;
+               };
+       };
+
+       gpio_export {
+               compatible = "gpio-export";
+               #size-cells = <0>;
+
+               usb {
+                       gpio-export,name = "usb";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio0 7 0>;
+               };
+               root_hub {
+                       gpio-export,name = "root_hub";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio0 12 0>;
+               };
+       };
+};

diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 3ddf726ea45a1811c16dd81d279e27e81bee7205..04d68fe49616c785416da8453627021feaa06afa 100644 (file)
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -341,6 +341,7 @@ Image/Build/Profile/FREESTATION5=$(call BuildFirmware/Default8M/$(1),$(1),freest
 Image/Build/Profile/MOFI3500-3GN=$(call BuildFirmware/Default8M/$(1),$(1),mofi3500-3gn,MOFI3500-3GN)
 
 # Kernel name should be "Linux Kernel Image" to make the OpenWrt image installable from factory Web UI
+Image/Build/Profile/MPRA1=$(call BuildFirmware/Default4M/$(1),$(1),mpr-a1,MPRA1,Linux Kernel Image)
 Image/Build/Profile/MPRA2=$(call BuildFirmware/Default8M/$(1),$(1),mpr-a2,MPRA2,Linux Kernel Image)
 
 Image/Build/Profile/NBG-419N=$(call BuildFirmware/Default4M/$(1),$(1),nbg-419n,NBG-419N)

diff --git a/target/linux/ramips/rt305x/profiles/hame.mk b/target/linux/ramips/rt305x/profiles/hame.mk
index 1a85be7ba3a3ef615472c0066cacd0a57bd59a0c..3a607112dcda1f3c04eb44714f9219254bd3d6ff 100644 (file)
--- a/target/linux/ramips/rt305x/profiles/hame.mk
+++ b/target/linux/ramips/rt305x/profiles/hame.mk
@@ -5,6 +5,18 @@
 # See /LICENSE for more information.
 #
 
+define Profile/MPRA1
+       NAME:=HAME MPR-A1
+       PACKAGES:=\
+               kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-net
+endef
+
+define Profile/MPRA1/Description
+       Package set for HAME MPR-A1 board
+endef
+
+$(eval $(call Profile,MPRA1))
+
 define Profile/MPRA2
        NAME:=HAME MPR-A2
        PACKAGES:=\