mx28: fix clearing of IRQs in power init
authorZach Sadecki <zach@itwatchdogs.com>
Mon, 9 Jan 2012 10:22:54 +0000 (10:22 +0000)
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>
Mon, 16 Jan 2012 07:40:10 +0000 (08:40 +0100)
There are 2 locations in the power init code for the mx28 where IRQs are not being cleared because incorrect methods to clear those bits were being used.  This was causing my board to get stuck waiting for POWER_CTRL_VDD5V_DROOP_IRQ to clear.  Using the correct method to clear the IRQs fixes it.

Signed-off-by: Zach Sadecki <zach@itwatchdogs.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
arch/arm/cpu/arm926ejs/mx28/spl_power_init.c

index a4dc2a31b7b275c918d40987555bdae72d7ad9ed..380b120dc9c6d1e623f1cf9fa310ad4bfd951448 100644 (file)
@@ -240,8 +240,8 @@ void mx28_enable_4p2_dcdc_input(int xfer)
                clrbits_le32(&power_regs->hw_power_minpwr, POWER_MINPWR_PWD_BO);
 
        while (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ)
-               clrbits_le32(&power_regs->hw_power_ctrl,
-                               POWER_CTRL_VBUS_VALID_IRQ);
+               writel(POWER_CTRL_VBUS_VALID_IRQ,
+                       &power_regs->hw_power_ctrl_clr);
 
        if (prev_5v_brnout) {
                writel(POWER_5VCTRL_PWDN_5VBRNOUT,
@@ -256,8 +256,8 @@ void mx28_enable_4p2_dcdc_input(int xfer)
        }
 
        while (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VDD5V_DROOP_IRQ)
-               clrbits_le32(&power_regs->hw_power_ctrl,
-                               POWER_CTRL_VDD5V_DROOP_IRQ);
+               writel(POWER_CTRL_VDD5V_DROOP_IRQ,
+                       &power_regs->hw_power_ctrl_clr);
 
        if (prev_5v_droop)
                clrbits_le32(&power_regs->hw_power_ctrl,