#include "pvrusb2-encoder.h"
#include "pvrusb2-hdw-internal.h"
#include "pvrusb2-debug.h"
+#include "pvrusb2-fx2-cmd.h"
chunkCnt = 8;
if (chunkCnt > dlen) chunkCnt = dlen;
memset(hdw->cmd_buffer,0,sizeof(hdw->cmd_buffer));
- hdw->cmd_buffer[0] = 0x01;
+ hdw->cmd_buffer[0] = FX2CMD_MEM_WRITE_DWORD;
for (idx = 0; idx < chunkCnt; idx++) {
hdw->cmd_buffer[1+(idx*7)+6] = 0x44 + idx + offs;
PVR2_DECOMPOSE_LE(hdw->cmd_buffer, 1+(idx*7),
chunkCnt = 16;
if (chunkCnt > dlen) chunkCnt = dlen;
memset(hdw->cmd_buffer,0,sizeof(hdw->cmd_buffer));
- hdw->cmd_buffer[0] = statusFl ? 0x02 : 0x28;
+ hdw->cmd_buffer[0] =
+ (statusFl ? FX2CMD_MEM_READ_DWORD : FX2CMD_MEM_READ_64BYTES);
hdw->cmd_buffer[7] = 0x44 + offs;
ret = pvr2_send_request(hdw,
hdw->cmd_buffer,8,
--- /dev/null
+#ifndef _PVRUSB2_FX2_CMD_H_
+#define _PVRUSB2_FX2_CMD_H_
+
+#define FX2CMD_MEM_WRITE_DWORD 0x01
+#define FX2CMD_MEM_READ_DWORD 0x02
+
+#define FX2CMD_MEM_READ_64BYTES 0x28
+
+#define FX2CMD_REG_WRITE 0x04
+#define FX2CMD_REG_READ 0x05
+
+#define FX2CMD_I2C_WRITE 0x08
+#define FX2CMD_I2C_READ 0x09
+
+#define FX2CMD_GET_USB_SPEED 0x0b
+
+#define FX2CMD_STREAMING_ON 0x36
+#define FX2CMD_STREAMING_OFF 0x37
+
+#define FX2CMD_POWER_OFF 0xdc
+#define FX2CMD_POWER_ON 0xde
+
+#define FX2CMD_DEEP_RESET 0xdd
+
+#define FX2CMD_GET_EEPROM_ADDR 0xeb
+#define FX2CMD_GET_IR_CODE 0xec
+
+#endif /* _PVRUSB2_FX2_CMD_H_ */
#include "pvrusb2-hdw-internal.h"
#include "pvrusb2-encoder.h"
#include "pvrusb2-debug.h"
+#include "pvrusb2-fx2-cmd.h"
#define TV_MIN_FREQ 55250000L
#define TV_MAX_FREQ 850000000L
firmware needs be loaded. */
int result;
LOCK_TAKE(hdw->ctl_lock); do {
- hdw->cmd_buffer[0] = 0xeb;
+ hdw->cmd_buffer[0] = FX2CMD_GET_EEPROM_ADDR;
result = pvr2_send_request_ex(hdw,HZ*1,!0,
hdw->cmd_buffer,1,
hdw->cmd_buffer,1);
{
int result;
LOCK_TAKE(hdw->ctl_lock); do {
- hdw->cmd_buffer[0] = 0x0b;
+ hdw->cmd_buffer[0] = FX2CMD_GET_USB_SPEED;
result = pvr2_send_request(hdw,
hdw->cmd_buffer,1,
hdw->cmd_buffer,1);
LOCK_TAKE(hdw->ctl_lock);
- hdw->cmd_buffer[0] = 0x04; /* write register prefix */
+ hdw->cmd_buffer[0] = FX2CMD_REG_WRITE; /* write register prefix */
PVR2_DECOMPOSE_LE(hdw->cmd_buffer,1,data);
hdw->cmd_buffer[5] = 0;
hdw->cmd_buffer[6] = (reg >> 8) & 0xff;
LOCK_TAKE(hdw->ctl_lock);
- hdw->cmd_buffer[0] = 0x05; /* read register prefix */
+ hdw->cmd_buffer[0] = FX2CMD_REG_READ; /* read register prefix */
hdw->cmd_buffer[1] = 0;
hdw->cmd_buffer[2] = 0;
hdw->cmd_buffer[3] = 0;
LOCK_TAKE(hdw->ctl_lock); do {
pvr2_trace(PVR2_TRACE_INIT,"Requesting uproc hard reset");
hdw->flag_ok = !0;
- hdw->cmd_buffer[0] = 0xdd;
+ hdw->cmd_buffer[0] = FX2CMD_DEEP_RESET;
status = pvr2_send_request(hdw,hdw->cmd_buffer,1,NULL,0);
} while (0); LOCK_GIVE(hdw->ctl_lock);
return status;
int status;
LOCK_TAKE(hdw->ctl_lock); do {
pvr2_trace(PVR2_TRACE_INIT,"Requesting powerup");
- hdw->cmd_buffer[0] = 0xde;
+ hdw->cmd_buffer[0] = FX2CMD_POWER_ON;
status = pvr2_send_request(hdw,hdw->cmd_buffer,1,NULL,0);
} while (0); LOCK_GIVE(hdw->ctl_lock);
return status;
{
int status;
LOCK_TAKE(hdw->ctl_lock); do {
- hdw->cmd_buffer[0] = (runFl ? 0x36 : 0x37);
+ hdw->cmd_buffer[0] =
+ (runFl ? FX2CMD_STREAMING_ON : FX2CMD_STREAMING_OFF);
status = pvr2_send_request(hdw,hdw->cmd_buffer,1,NULL,0);
} while (0); LOCK_GIVE(hdw->ctl_lock);
if (!status) {
{
int result;
LOCK_TAKE(hdw->ctl_lock); do {
- hdw->cmd_buffer[0] = 0xeb;
+ hdw->cmd_buffer[0] = FX2CMD_GET_EEPROM_ADDR;
result = pvr2_send_request(hdw,
hdw->cmd_buffer,1,
hdw->cmd_buffer,1);
#include "pvrusb2-i2c-core.h"
#include "pvrusb2-hdw-internal.h"
#include "pvrusb2-debug.h"
+#include "pvrusb2-fx2-cmd.h"
#define trace_i2c(...) pvr2_trace(PVR2_TRACE_I2C,__VA_ARGS__)
memset(hdw->cmd_buffer, 0, sizeof(hdw->cmd_buffer));
/* Set up command buffer for an I2C write */
- hdw->cmd_buffer[0] = 0x08; /* write prefix */
+ hdw->cmd_buffer[0] = FX2CMD_I2C_WRITE; /* write prefix */
hdw->cmd_buffer[1] = i2c_addr; /* i2c addr of chip */
hdw->cmd_buffer[2] = length; /* length of what follows */
if (length) memcpy(hdw->cmd_buffer + 3, data, length);
memset(hdw->cmd_buffer, 0, sizeof(hdw->cmd_buffer));
/* Set up command buffer for an I2C write followed by a read */
- hdw->cmd_buffer[0] = 0x09; /* read prefix */
+ hdw->cmd_buffer[0] = FX2CMD_I2C_READ; /* read prefix */
hdw->cmd_buffer[1] = dlen; /* arg length */
hdw->cmd_buffer[2] = rlen; /* answer length. Device will send one
more byte (status). */
/* Issue a command to the FX2 to read the IR receiver. */
LOCK_TAKE(hdw->ctl_lock); do {
- hdw->cmd_buffer[0] = 0xec;
+ hdw->cmd_buffer[0] = FX2CMD_GET_IR_CODE;
stat = pvr2_send_request(hdw,
hdw->cmd_buffer,1,
hdw->cmd_buffer,4);
{
struct v4l2_tuner *vt = (struct v4l2_tuner *)arg;
- if (vt->index != 0)
- break;
+ if (vt->index != 0) break; /* Only answer for the 1st tuner */
pvr2_hdw_execute_tuner_poll(hdw);
ret = pvr2_hdw_get_tuner_status(hdw,vt);