Now that the 'register_type' field of the 'sh_eth' driver's platform data is not
used by the driver anymore, it's time to remove it and its initializers from
the SH platform code. Also move *enum* declaring values for this field from
<linux/sh_eth.h> to the local driver's header file as they're only needed
by the driver itself now...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
static struct sh_eth_plat_data sh_eth_platdata = {
.phy = 0x00, /* LAN8710A */
.edmac_endian = EDMAC_LITTLE_ENDIAN,
- .register_type = SH_ETH_REG_GIGABIT,
.phy_interface = PHY_INTERFACE_MODE_MII,
};
static struct sh_eth_plat_data ether_platform_data __initdata = {
.phy = 0x01,
.edmac_endian = EDMAC_LITTLE_ENDIAN,
- .register_type = SH_ETH_REG_FAST_RCAR,
.phy_interface = PHY_INTERFACE_MODE_RMII,
/*
* Although the LINK signal is available on the board, it's connected to
static struct sh_eth_plat_data sh7763_eth_pdata = {
.phy = 0,
.edmac_endian = EDMAC_LITTLE_ENDIAN,
- .register_type = SH_ETH_REG_GIGABIT,
.phy_interface = PHY_INTERFACE_MODE_MII,
};
static struct sh_eth_plat_data sh7757_eth0_pdata = {
.phy = 1,
.edmac_endian = EDMAC_LITTLE_ENDIAN,
- .register_type = SH_ETH_REG_FAST_SH4,
.set_mdio_gate = sh7757_eth_set_mdio_gate,
};
static struct sh_eth_plat_data sh7757_eth1_pdata = {
.phy = 1,
.edmac_endian = EDMAC_LITTLE_ENDIAN,
- .register_type = SH_ETH_REG_FAST_SH4,
.set_mdio_gate = sh7757_eth_set_mdio_gate,
};
static struct sh_eth_plat_data sh7757_eth_giga0_pdata = {
.phy = 18,
.edmac_endian = EDMAC_LITTLE_ENDIAN,
- .register_type = SH_ETH_REG_GIGABIT,
.set_mdio_gate = sh7757_eth_giga_set_mdio_gate,
.phy_interface = PHY_INTERFACE_MODE_RGMII_ID,
};
static struct sh_eth_plat_data sh7757_eth_giga1_pdata = {
.phy = 19,
.edmac_endian = EDMAC_LITTLE_ENDIAN,
- .register_type = SH_ETH_REG_GIGABIT,
.set_mdio_gate = sh7757_eth_giga_set_mdio_gate,
.phy_interface = PHY_INTERFACE_MODE_RGMII_ID,
};
static struct sh_eth_plat_data sh_eth_plat = {
.phy = 0x1f, /* SMSC LAN8700 */
.edmac_endian = EDMAC_LITTLE_ENDIAN,
- .register_type = SH_ETH_REG_FAST_SH4,
.phy_interface = PHY_INTERFACE_MODE_MII,
.ether_link_active_low = 1
};
static struct sh_eth_plat_data sh_eth_plat = {
.phy = 0x1f, /* SMSC LAN8187 */
.edmac_endian = EDMAC_LITTLE_ENDIAN,
- .register_type = SH_ETH_REG_FAST_SH4,
.phy_interace = PHY_INTERFACE_MODE_MII,
};
static struct sh_eth_plat_data sh7763_eth_pdata = {
.phy = 1,
.edmac_endian = EDMAC_LITTLE_ENDIAN,
- .register_type = SH_ETH_REG_GIGABIT,
.phy_interface = PHY_INTERFACE_MODE_MII,
};
static struct sh_eth_plat_data eth_platform_data = {
.phy = 1,
.edmac_endian = EDMAC_LITTLE_ENDIAN,
- .register_type = SH_ETH_REG_FAST_SH3_SH2,
.phy_interace = PHY_INTERFACE_MODE_MII,
};
SH_ETH_MAX_REGISTER_OFFSET,
};
+enum {
+ SH_ETH_REG_GIGABIT,
+ SH_ETH_REG_FAST_RCAR,
+ SH_ETH_REG_FAST_SH4,
+ SH_ETH_REG_FAST_SH3_SH2
+};
+
/* Driver's parameters */
#if defined(CONFIG_CPU_SH4) || defined(CONFIG_ARCH_SHMOBILE)
#define SH4_SKB_RX_ALIGN 32
#include <linux/if_ether.h>
enum {EDMAC_LITTLE_ENDIAN, EDMAC_BIG_ENDIAN};
-enum {
- SH_ETH_REG_GIGABIT,
- SH_ETH_REG_FAST_RCAR,
- SH_ETH_REG_FAST_SH4,
- SH_ETH_REG_FAST_SH3_SH2
-};
struct sh_eth_plat_data {
int phy;
int edmac_endian;
- int register_type;
phy_interface_t phy_interface;
void (*set_mdio_gate)(void *addr);