#define CSR_BASE (0x000)
#define CSR_HW_IF_CONFIG_REG (CSR_BASE+0x000) /* hardware interface config */
-#define CSR_INT_COALESCING (CSR_BASE+0x004) /* accum ints, 32-usec units */
+#define CSR_INT_COALESCING (CSR_BASE+0x004) /* accum ints, 32-usec units */
#define CSR_INT (CSR_BASE+0x008) /* host interrupt status/ack */
#define CSR_INT_MASK (CSR_BASE+0x00c) /* host interrupt enable */
#define CSR_FH_INT_STATUS (CSR_BASE+0x010) /* busmaster int status/ack*/
#define FH_RCSR_CHNL0_RX_CONFIG_RBDBC_SIZE_MSK (0x00F00000) /* bits 20-23 */
#define FH_RCSR_CHNL0_RX_CONFIG_DMA_CHNL_EN_MSK (0xC0000000) /* bits 30-31*/
-#define FH_RCSR_RX_CONFIG_RBDCB_SIZE_BITSHIFT (20)
-#define FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_BITSHIFT (4)
+#define FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS (20)
+#define FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS (4)
#define RX_RB_TIMEOUT (0x10)
#define FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_VAL (0x00000000)
#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_12K (0x00020000)
#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_16K (0x00030000)
-#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_NO_INT_VAL (0x00000000)
-#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL (0x00001000)
+#define FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY (0x00000004)
+#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_NO_INT_VAL (0x00000000)
+#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL (0x00001000)
/**
{
int ret;
unsigned long flags;
- unsigned int rb_size;
+ u32 rb_size;
+ const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */
+ const u32 rb_timeout = 0; /* FIXME: RX_RB_TIMEOUT why this stalls RX */
spin_lock_irqsave(&priv->lock, flags);
ret = iwl_grab_nic_access(priv);
/* Tell device where to find RBD circular buffer in DRAM */
iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_BASE_REG,
- rxq->dma_addr >> 8);
+ (u32)(rxq->dma_addr >> 8));
/* Tell device where in DRAM to update its Rx status */
iwl_write_direct32(priv, FH_RSCSR_CHNL0_STTS_WPTR_REG,
(priv->shared_phys + priv->rb_closed_offset) >> 4);
- /* Enable Rx DMA, enable host interrupt, Rx buffer size 4k, 256 RBDs */
+ /* Enable Rx DMA
+ * FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY is set becuase of HW bug in
+ * the credit mechanism in 5000 HW RX FIFO
+ * Direct rx interrupts to hosts
+ * Rx buffer size 4 or 8k
+ * RB timeout 0x10
+ * 256 RBDs
+ */
iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG,
FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL |
+ FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY |
FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL |
- rb_size |
- /* 0x10 << 4 | */
- (RX_QUEUE_SIZE_LOG <<
- FH_RCSR_RX_CONFIG_RBDCB_SIZE_BITSHIFT));
-
- /*
- * iwl_write32(priv,CSR_INT_COAL_REG,0);
- */
+ rb_size|
+ (rb_timeout << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)|
+ (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS));
iwl_release_nic_access(priv);
+
+ iwl_write32(priv, CSR_INT_COALESCING, 0x40);
+
spin_unlock_irqrestore(&priv->lock, flags);
return 0;