--- /dev/null
+/*
+ * Blackfin On-Chip Real Time Clock Driver
+ * Supports BF531/BF532/BF533/BF534/BF536/BF537
+ *
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+/* The biggest issue we deal with in this driver is that register writes are
+ * synced to the RTC frequency of 1Hz. So if you write to a register and
+ * attempt to write again before the first write has completed, the new write
+ * is simply discarded. This can easily be troublesome if userspace disables
+ * one event (say periodic) and then right after enables an event (say alarm).
+ * Since all events are maintained in the same interrupt mask register, if
+ * we wrote to it to disable the first event and then wrote to it again to
+ * enable the second event, that second event would not be enabled as the
+ * write would be discarded and things quickly fall apart.
+ *
+ * To keep this delay from significantly degrading performance (we, in theory,
+ * would have to sleep for up to 1 second everytime we wanted to write a
+ * register), we only check the write pending status before we start to issue
+ * a new write. We bank on the idea that it doesnt matter when the sync
+ * happens so long as we don't attempt another write before it does. The only
+ * time userspace would take this penalty is when they try and do multiple
+ * operations right after another ... but in this case, they need to take the
+ * sync penalty, so we should be OK.
+ *
+ * Also note that the RTC_ISTAT register does not suffer this penalty; its
+ * writes to clear status registers complete immediately.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+
+#include <asm/blackfin.h>
+
+#define stamp(fmt, args...) pr_debug("%s:%i: " fmt "\n", __FUNCTION__, __LINE__, ## args)
+#define stampit() stamp("here i am")
+
+struct bfin_rtc {
+ struct rtc_device *rtc_dev;
+ struct rtc_time rtc_alarm;
+ spinlock_t lock;
+};
+
+/* Bit values for the ISTAT / ICTL registers */
+#define RTC_ISTAT_WRITE_COMPLETE 0x8000
+#define RTC_ISTAT_WRITE_PENDING 0x4000
+#define RTC_ISTAT_ALARM_DAY 0x0040
+#define RTC_ISTAT_24HR 0x0020
+#define RTC_ISTAT_HOUR 0x0010
+#define RTC_ISTAT_MIN 0x0008
+#define RTC_ISTAT_SEC 0x0004
+#define RTC_ISTAT_ALARM 0x0002
+#define RTC_ISTAT_STOPWATCH 0x0001
+
+/* Shift values for RTC_STAT register */
+#define DAY_BITS_OFF 17
+#define HOUR_BITS_OFF 12
+#define MIN_BITS_OFF 6
+#define SEC_BITS_OFF 0
+
+/* Some helper functions to convert between the common RTC notion of time
+ * and the internal Blackfin notion that is stored in 32bits.
+ */
+static inline u32 rtc_time_to_bfin(unsigned long now)
+{
+ u32 sec = (now % 60);
+ u32 min = (now % (60 * 60)) / 60;
+ u32 hour = (now % (60 * 60 * 24)) / (60 * 60);
+ u32 days = (now / (60 * 60 * 24));
+ return (sec << SEC_BITS_OFF) +
+ (min << MIN_BITS_OFF) +
+ (hour << HOUR_BITS_OFF) +
+ (days << DAY_BITS_OFF);
+}
+static inline unsigned long rtc_bfin_to_time(u32 rtc_bfin)
+{
+ return (((rtc_bfin >> SEC_BITS_OFF) & 0x003F)) +
+ (((rtc_bfin >> MIN_BITS_OFF) & 0x003F) * 60) +
+ (((rtc_bfin >> HOUR_BITS_OFF) & 0x001F) * 60 * 60) +
+ (((rtc_bfin >> DAY_BITS_OFF) & 0x7FFF) * 60 * 60 * 24);
+}
+static inline void rtc_bfin_to_tm(u32 rtc_bfin, struct rtc_time *tm)
+{
+ rtc_time_to_tm(rtc_bfin_to_time(rtc_bfin), tm);
+}
+
+/* Wait for the previous write to a RTC register to complete.
+ * Unfortunately, we can't sleep here as that introduces a race condition when
+ * turning on interrupt events. Consider this:
+ * - process sets alarm
+ * - process enables alarm
+ * - process sleeps while waiting for rtc write to sync
+ * - interrupt fires while process is sleeping
+ * - interrupt acks the event by writing to ISTAT
+ * - interrupt sets the WRITE PENDING bit
+ * - interrupt handler finishes
+ * - process wakes up, sees WRITE PENDING bit set, goes to sleep
+ * - interrupt fires while process is sleeping
+ * If anyone can point out the obvious solution here, i'm listening :). This
+ * shouldn't be an issue on an SMP or preempt system as this function should
+ * only be called with the rtc lock held.
+ */
+static void rtc_bfin_sync_pending(void)
+{
+ stampit();
+ while (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_COMPLETE)) {
+ if (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING))
+ break;
+ }
+ bfin_write_RTC_ISTAT(RTC_ISTAT_WRITE_COMPLETE);
+}
+
+static void rtc_bfin_reset(struct bfin_rtc *rtc)
+{
+ /* Initialize the RTC. Enable pre-scaler to scale RTC clock
+ * to 1Hz and clear interrupt/status registers. */
+ spin_lock_irq(&rtc->lock);
+ rtc_bfin_sync_pending();
+ bfin_write_RTC_PREN(0x1);
+ bfin_write_RTC_ICTL(0);
+ bfin_write_RTC_SWCNT(0);
+ bfin_write_RTC_ALARM(0);
+ bfin_write_RTC_ISTAT(0xFFFF);
+ spin_unlock_irq(&rtc->lock);
+}
+
+static irqreturn_t bfin_rtc_interrupt(int irq, void *dev_id)
+{
+ struct platform_device *pdev = to_platform_device(dev_id);
+ struct bfin_rtc *rtc = platform_get_drvdata(pdev);
+ unsigned long events = 0;
+ u16 rtc_istat;
+
+ stampit();
+
+ spin_lock_irq(&rtc->lock);
+
+ rtc_istat = bfin_read_RTC_ISTAT();
+
+ if (rtc_istat & (RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY)) {
+ bfin_write_RTC_ISTAT(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY);
+ events |= RTC_AF | RTC_IRQF;
+ }
+
+ if (rtc_istat & RTC_ISTAT_STOPWATCH) {
+ bfin_write_RTC_ISTAT(RTC_ISTAT_STOPWATCH);
+ events |= RTC_PF | RTC_IRQF;
+ bfin_write_RTC_SWCNT(rtc->rtc_dev->irq_freq);
+ }
+
+ if (rtc_istat & RTC_ISTAT_SEC) {
+ bfin_write_RTC_ISTAT(RTC_ISTAT_SEC);
+ events |= RTC_UF | RTC_IRQF;
+ }
+
+ rtc_update_irq(rtc->rtc_dev, 1, events);
+
+ spin_unlock_irq(&rtc->lock);
+
+ return IRQ_HANDLED;
+}
+
+static int bfin_rtc_open(struct device *dev)
+{
+ struct bfin_rtc *rtc = dev_get_drvdata(dev);
+ int ret;
+
+ stampit();
+
+ ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_DISABLED, "rtc-bfin", dev);
+ if (unlikely(ret)) {
+ dev_err(dev, "request RTC IRQ failed with %d\n", ret);
+ return ret;
+ }
+
+ rtc_bfin_reset(rtc);
+
+ return ret;
+}
+
+static void bfin_rtc_release(struct device *dev)
+{
+ struct bfin_rtc *rtc = dev_get_drvdata(dev);
+ stampit();
+ rtc_bfin_reset(rtc);
+ free_irq(IRQ_RTC, dev);
+}
+
+static int bfin_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+{
+ struct bfin_rtc *rtc = dev_get_drvdata(dev);
+
+ stampit();
+
+ switch (cmd) {
+ case RTC_PIE_ON:
+ stampit();
+ spin_lock_irq(&rtc->lock);
+ rtc_bfin_sync_pending();
+ bfin_write_RTC_ISTAT(RTC_ISTAT_STOPWATCH);
+ bfin_write_RTC_SWCNT(rtc->rtc_dev->irq_freq);
+ bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | RTC_ISTAT_STOPWATCH);
+ spin_unlock_irq(&rtc->lock);
+ return 0;
+ case RTC_PIE_OFF:
+ stampit();
+ spin_lock_irq(&rtc->lock);
+ rtc_bfin_sync_pending();
+ bfin_write_RTC_SWCNT(0);
+ bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & ~RTC_ISTAT_STOPWATCH);
+ spin_unlock_irq(&rtc->lock);
+ return 0;
+
+ case RTC_UIE_ON:
+ stampit();
+ spin_lock_irq(&rtc->lock);
+ rtc_bfin_sync_pending();
+ bfin_write_RTC_ISTAT(RTC_ISTAT_SEC);
+ bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | RTC_ISTAT_SEC);
+ spin_unlock_irq(&rtc->lock);
+ return 0;
+ case RTC_UIE_OFF:
+ stampit();
+ spin_lock_irq(&rtc->lock);
+ rtc_bfin_sync_pending();
+ bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & ~RTC_ISTAT_SEC);
+ spin_unlock_irq(&rtc->lock);
+ return 0;
+
+ case RTC_AIE_ON: {
+ unsigned long rtc_alarm;
+ u16 which_alarm;
+ int ret = 0;
+
+ stampit();
+
+ spin_lock_irq(&rtc->lock);
+
+ rtc_bfin_sync_pending();
+ if (rtc->rtc_alarm.tm_yday == -1) {
+ struct rtc_time now;
+ rtc_bfin_to_tm(bfin_read_RTC_STAT(), &now);
+ now.tm_sec = rtc->rtc_alarm.tm_sec;
+ now.tm_min = rtc->rtc_alarm.tm_min;
+ now.tm_hour = rtc->rtc_alarm.tm_hour;
+ ret = rtc_tm_to_time(&now, &rtc_alarm);
+ which_alarm = RTC_ISTAT_ALARM;
+ } else {
+ ret = rtc_tm_to_time(&rtc->rtc_alarm, &rtc_alarm);
+ which_alarm = RTC_ISTAT_ALARM_DAY;
+ }
+ if (ret == 0) {
+ bfin_write_RTC_ISTAT(which_alarm);
+ bfin_write_RTC_ALARM(rtc_time_to_bfin(rtc_alarm));
+ bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | which_alarm);
+ }
+
+ spin_unlock_irq(&rtc->lock);
+
+ return ret;
+ }
+ case RTC_AIE_OFF:
+ stampit();
+ spin_lock_irq(&rtc->lock);
+ rtc_bfin_sync_pending();
+ bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & ~(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY));
+ spin_unlock_irq(&rtc->lock);
+ return 0;
+ }
+
+ return -ENOIOCTLCMD;
+}
+
+static int bfin_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct bfin_rtc *rtc = dev_get_drvdata(dev);
+
+ stampit();
+
+ spin_lock_irq(&rtc->lock);
+ rtc_bfin_sync_pending();
+ rtc_bfin_to_tm(bfin_read_RTC_STAT(), tm);
+ spin_unlock_irq(&rtc->lock);
+
+ return 0;
+}
+
+static int bfin_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct bfin_rtc *rtc = dev_get_drvdata(dev);
+ int ret;
+ unsigned long now;
+
+ stampit();
+
+ spin_lock_irq(&rtc->lock);
+
+ ret = rtc_tm_to_time(tm, &now);
+ if (ret == 0) {
+ rtc_bfin_sync_pending();
+ bfin_write_RTC_STAT(rtc_time_to_bfin(now));
+ }
+
+ spin_unlock_irq(&rtc->lock);
+
+ return ret;
+}
+
+static int bfin_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct bfin_rtc *rtc = dev_get_drvdata(dev);
+ stampit();
+ memcpy(&alrm->time, &rtc->rtc_alarm, sizeof(struct rtc_time));
+ alrm->pending = !!(bfin_read_RTC_ICTL() & (RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY));
+ return 0;
+}
+
+static int bfin_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct bfin_rtc *rtc = dev_get_drvdata(dev);
+ stampit();
+ memcpy(&rtc->rtc_alarm, &alrm->time, sizeof(struct rtc_time));
+ return 0;
+}
+
+static int bfin_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+#define yesno(x) (x ? "yes" : "no")
+ u16 ictl = bfin_read_RTC_ICTL();
+ stampit();
+ seq_printf(seq, "alarm_IRQ\t: %s\n", yesno(ictl & RTC_ISTAT_ALARM));
+ seq_printf(seq, "wkalarm_IRQ\t: %s\n", yesno(ictl & RTC_ISTAT_ALARM_DAY));
+ seq_printf(seq, "seconds_IRQ\t: %s\n", yesno(ictl & RTC_ISTAT_SEC));
+ seq_printf(seq, "periodic_IRQ\t: %s\n", yesno(ictl & RTC_ISTAT_STOPWATCH));
+#ifdef DEBUG
+ seq_printf(seq, "RTC_STAT\t: 0x%08X\n", bfin_read_RTC_STAT());
+ seq_printf(seq, "RTC_ICTL\t: 0x%04X\n", bfin_read_RTC_ICTL());
+ seq_printf(seq, "RTC_ISTAT\t: 0x%04X\n", bfin_read_RTC_ISTAT());
+ seq_printf(seq, "RTC_SWCNT\t: 0x%04X\n", bfin_read_RTC_SWCNT());
+ seq_printf(seq, "RTC_ALARM\t: 0x%08X\n", bfin_read_RTC_ALARM());
+ seq_printf(seq, "RTC_PREN\t: 0x%04X\n", bfin_read_RTC_PREN());
+#endif
+ return 0;
+}
+
+static int bfin_irq_set_freq(struct device *dev, int freq)
+{
+ struct bfin_rtc *rtc = dev_get_drvdata(dev);
+ stampit();
+ rtc->rtc_dev->irq_freq = freq;
+ return 0;
+}
+
+static struct rtc_class_ops bfin_rtc_ops = {
+ .open = bfin_rtc_open,
+ .release = bfin_rtc_release,
+ .ioctl = bfin_rtc_ioctl,
+ .read_time = bfin_rtc_read_time,
+ .set_time = bfin_rtc_set_time,
+ .read_alarm = bfin_rtc_read_alarm,
+ .set_alarm = bfin_rtc_set_alarm,
+ .proc = bfin_rtc_proc,
+ .irq_set_freq = bfin_irq_set_freq,
+};
+
+static int __devinit bfin_rtc_probe(struct platform_device *pdev)
+{
+ struct bfin_rtc *rtc;
+ int ret = 0;
+
+ stampit();
+
+ rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
+ if (unlikely(!rtc))
+ return -ENOMEM;
+
+ spin_lock_init(&rtc->lock);
+
+ rtc->rtc_dev = rtc_device_register(pdev->name, &pdev->dev, &bfin_rtc_ops, THIS_MODULE);
+ if (unlikely(IS_ERR(rtc))) {
+ ret = PTR_ERR(rtc->rtc_dev);
+ goto err;
+ }
+ rtc->rtc_dev->irq_freq = 0;
+ rtc->rtc_dev->max_user_freq = (2 << 16); /* stopwatch is an unsigned 16 bit reg */
+
+ platform_set_drvdata(pdev, rtc);
+
+ return 0;
+
+err:
+ kfree(rtc);
+ return ret;
+}
+
+static int __devexit bfin_rtc_remove(struct platform_device *pdev)
+{
+ struct bfin_rtc *rtc = platform_get_drvdata(pdev);
+
+ rtc_device_unregister(rtc->rtc_dev);
+ platform_set_drvdata(pdev, NULL);
+ kfree(rtc);
+
+ return 0;
+}
+
+static struct platform_driver bfin_rtc_driver = {
+ .driver = {
+ .name = "rtc-bfin",
+ .owner = THIS_MODULE,
+ },
+ .probe = bfin_rtc_probe,
+ .remove = __devexit_p(bfin_rtc_remove),
+};
+
+static int __init bfin_rtc_init(void)
+{
+ stampit();
+ return platform_driver_register(&bfin_rtc_driver);
+}
+
+static void __exit bfin_rtc_exit(void)
+{
+ platform_driver_unregister(&bfin_rtc_driver);
+}
+
+module_init(bfin_rtc_init);
+module_exit(bfin_rtc_exit);
+
+MODULE_DESCRIPTION("Blackfin On-Chip Real Time Clock Driver");
+MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>");
+MODULE_LICENSE("GPL");
projects / openwrt / staging / blogic.git / commitdiff