Remove old P2812HNUFX dts

Remove unused P2812HNUFX board definition.

Signed-off-by: Sylwester Petela <sscapi@gmail.com>
SVN-Revision: 43988

diff --git a/target/linux/lantiq/dts/P2812HNUFX.dts b/target/linux/lantiq/dts/P2812HNUFX.dts
deleted file mode 100644 (file)
index 5af10d4..0000000
--- a/target/linux/lantiq/dts/P2812HNUFX.dts
+++ /dev/null
@@ -1,308 +0,0 @@
-/dts-v1/;
-
-/include/ "vr9.dtsi"
-
-/ {
-       model = "P2812HNUFX - ZyXEL P-2812HNU-Fx";
-       
-       chosen {
-               /*bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";*/
-       };
-
-       memory@0 {
-               reg = <0x0 0x8000000>;
-       };
-       
-       fpi@10000000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "lantiq,fpi", "simple-bus";
-               ranges = <0x0 0x10000000 0xEEFFFFF>;
-               reg = <0x10000000 0xEF00000>;
-
-               localbus@0 {
-                       #address-cells = <2>;
-                       #size-cells = <1>;
-                       compatible = "lantiq,localbus", "simple-bus";
-
-                       nand-parts@0 {
-                               compatible = "gen_nand", "lantiq,nand-xway";
-                               lantiq,cs = <1>;
-                               bank-width = <2>;
-                               reg = <0 0x0 0x2000000>;
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-
-                               partition@0 {
-                                       label = "u-boot";
-                                       reg = <0x00000 0x40000>;
-                               };
-
-                               partition@40000 {
-                                       label = "u-boot environment";
-                                       reg = <0x40000 0x20000>;
-                               };
-
-                               partition@60000 {
-                                       label = "root";
-                                       reg = <0x60000 0x7fa0000>;
-                               };
-                       };
-               };
-
-               gpio: pinmux@E100B10 {
-                       compatible = "lantiq,pinctrl-xr9";
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&state_default>;
-                       
-                       interrupt-parent = <&icu0>;
-                       interrupts = <166 135 66 40 41 42 38>;
-
-                       #gpio-cells = <2>;
-                       gpio-controller;
-                       reg = <0xE100B10 0xA0>;
-
-                       state_default: pinmux {
-                               mdio {
-                                       lantiq,groups = "mdio";
-                                       lantiq,function = "mdio";
-                               };
-                               gphy-leds {
-                                       lantiq,groups = "gphy0 led1", "gphy1 led1",
-                                                       "gphy0 led2", "gphy1 led2";
-                                       lantiq,function = "gphy";
-                                       lantiq,pull = <2>;
-                                       lantiq,open-drain = <0>;
-                                       lantiq,output = <1>;
-                               };
-                               stp {
-                                       lantiq,groups = "stp";
-                                       lantiq,function = "stp";
-                                       lantiq,pull = <2>;
-                                       lantiq,open-drain = <0>;
-                                       lantiq,output = <1>;
-                               };
-                               pci {
-                                       lantiq,groups = "gnt1", "req1";
-                                       lantiq,function = "pci";
-                               };
-                               pci-rst {
-                                       lantiq,pins = "io21";
-                                       lantiq,pull = <0>;
-                                       lantiq,open-drain = <0>;
-                                       lantiq,output = <1>;
-                               };
-                               ifxhcd-rst {
-                                       lantiq,pins = "io33";
-                                       lantiq,pull = <0>;
-                                       lantiq,open-drain = <0>;
-                                       lantiq,output = <1>;
-                               };
-                               nand {
-                                       lantiq,groups = "nand cle", "nand ale",
-                                                       "nand rd", "nand cs1", "nand rdy";
-                                       lantiq,function = "ebu";
-                                       lantiq,pull = <1>;
-                               };
-                       };
-               };
-
-               eth@E108000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "lantiq,xrx200-net";
-                       reg = < 0xE108000 0x3000 /* switch */
-                               0xE10B100 0x70 /* mdio */
-                               0xE10B1D8 0x30 /* mii */
-                               0xE10B308 0x30 /* pmac */
-                       >;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <73 72>;
-
-                       lan: interface@0 {
-                               compatible = "lantiq,xrx200-pdi";
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               reg = <0>;
-                               mac-address = [ 00 11 22 33 44 55 ];
-                               lantiq,switch;
-
-                               ethernet@0 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <0>;
-                                       phy-mode = "rgmii";
-                                       phy-handle = <&phy0>;
-                               };
-                               ethernet@1 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <1>;
-                                       phy-mode = "rgmii";
-                                       phy-handle = <&phy1>;
-                               };
-                               ethernet@2 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <2>;
-                                       phy-mode = "gmii";
-                                       phy-handle = <&phy11>;
-                               };
-                               ethernet@4 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <4>;
-                                       phy-mode = "gmii";
-                                       phy-handle = <&phy13>;
-                               };
-                               ethernet@5 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <5>;
-                                       phy-mode = "rgmii";
-                                       phy-handle = <&phy5>;
-                               };
-                       };
-
-                       mdio@0 {
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               compatible = "lantiq,xrx200-mdio";
-                               phy0: ethernet-phy@0 {
-                                       reg = <0x0>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy1: ethernet-phy@1 {
-                                       reg = <0x1>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy5: ethernet-phy@5 {
-                                       reg = <0x5>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy11: ethernet-phy@11 {
-                                       reg = <0x11>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy13: ethernet-phy@13 {
-                                       reg = <0x13>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                       };
-               };
-
-               stp: stp@E100BB0 {
-                       compatible = "lantiq,gpio-stp-xway";
-                       reg = <0xE100BB0 0x40>;
-                       #gpio-cells = <2>;
-                       gpio-controller;
-
-                       lantiq,shadow = <0xffffff>;
-                       lantiq,groups = <0x7>;
-                       /*
-                       lantiq,dsl = <0x3>;
-                       lantiq,phy1 = <0x7>;
-                       lantiq,phy2 = <0x7>;
-                       */
-               };
-
-               ifxhcd@E101000 {
-                       status = "okay";
-                       gpios = <&gpio 33 0>;
-                       lantiq,portmask = <0x3>;
-               };
-
-               pci@E105400 {
-                       lantiq,bus-clock = <33333333>;
-                       /* lantiq,external-clock; */
-                       lantiq,delay-hi = <0>; /* 0ns delay */
-                       lantiq,delay-lo = <0>; /* 0.0ns delay */
-                       interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-                       interrupt-map = <
-                               0x7000 0 0 1 &icu0 29 //1 // slot 14, irq 29
-                               >;
-                       gpio-reset = <&gpio 21 0>;
-                       req-mask = <0x1>;       /* GNT1 */
-                       status = "okay";
-               };
-       };
-
-       gphy-xrx200 {
-               compatible = "lantiq,phy-xrx200";
-               firmware = "lantiq/vr9_phy11g_a1x.bin";
-               phys = [ 00 01 ];
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 39 1>;
-                       linux,code = <0x198>;
-               };
-               rfkill {
-                       label = "rfkill";
-                       gpios = <&gpio 1 1>;
-                       linux,code = <0xf7>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               internet2 {
-                       label = "internet2";
-                       gpios = <&stp 16 1>;
-               };
-               internet {
-                       label = "internet";
-                       gpios = <&stp 17 1>;
-               };
-               dsl {
-                       label = "dsl";
-                       gpios = <&stp 18 1>;
-               };
-               dsl2 {
-                       label = "dsl2";
-                       gpios = <&stp 19 1>;
-               };
-               wifi2 {
-                       label = "wifi2";
-                       gpios = <&stp 20 1>;
-               };
-               wlan {
-                       label = "wifi";
-                       gpios = <&stp 21 1>;
-               };
-               power2 {
-                       label = "power2";
-                       gpios = <&stp 22 1>;
-               };
-               power {
-                       label = "power";
-                       gpios = <&stp 23 1>;
-               };
-               usb1 {
-                       label = "usb";
-                       gpios = <&gpio 38 1>;
-               };
-               usb2 {
-                       label = "usb2";
-                       gpios = <&gpio 44 1>;
-               };
-               phone1 {
-                       label = "phone1";
-                       gpios = <&gpio 11 1>;
-               };
-               phone1warn {
-                       label = "phone1warn";
-                       gpios = <&gpio 12 1>;
-               };
-               phone2 {
-                       label = "phone2";
-                       gpios = <&gpio 28 1>;
-               };
-               phone2warn {
-                       label = "phone2warn";
-                       gpios = <&gpio 26 1>;
-               };
-       };
-};