--- /dev/null
+--- /dev/null
++++ b/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt
+@@ -0,0 +1,22 @@
++* Real Time Clock of the Armada 38x SoCs
++
++RTC controller for the Armada 38x SoCs
++
++Required properties:
++- compatible : Should be "marvell,armada-380-rtc"
++- reg: a list of base address and size pairs, one for each entry in
++ reg-names
++- reg names: should contain:
++ * "rtc" for the RTC registers
++ * "rtc-soc" for the SoC related registers and among them the one
++ related to the interrupt.
++- interrupts: IRQ line for the RTC.
++
++Example:
++
++rtc@a3800 {
++ compatible = "marvell,armada-380-rtc";
++ reg = <0xa3800 0x20>, <0x184a0 0x0c>;
++ reg-names = "rtc", "rtc-soc";
++ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
++};
+--- a/drivers/rtc/Kconfig
++++ b/drivers/rtc/Kconfig
+@@ -1262,6 +1262,16 @@ config RTC_DRV_MV
+ This driver can also be built as a module. If so, the module
+ will be called rtc-mv.
+
++config RTC_DRV_ARMADA38X
++ tristate "Armada 38x Marvell SoC RTC"
++ depends on ARCH_MVEBU
++ help
++ If you say yes here you will get support for the in-chip RTC
++ that can be found in the Armada 38x Marvell's SoC device
++
++ This driver can also be built as a module. If so, the module
++ will be called armada38x-rtc.
++
+ config RTC_DRV_PS3
+ tristate "PS3 RTC"
+ depends on PPC_PS3
+--- a/drivers/rtc/Makefile
++++ b/drivers/rtc/Makefile
+@@ -24,6 +24,7 @@ obj-$(CONFIG_RTC_DRV_88PM860X) += rtc-8
+ obj-$(CONFIG_RTC_DRV_88PM80X) += rtc-88pm80x.o
+ obj-$(CONFIG_RTC_DRV_AB3100) += rtc-ab3100.o
+ obj-$(CONFIG_RTC_DRV_AB8500) += rtc-ab8500.o
++obj-$(CONFIG_RTC_DRV_ARMADA38X) += rtc-armada38x.o
+ obj-$(CONFIG_RTC_DRV_AS3722) += rtc-as3722.o
+ obj-$(CONFIG_RTC_DRV_AT32AP700X)+= rtc-at32ap700x.o
+ obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o
+--- /dev/null
++++ b/drivers/rtc/rtc-armada38x.c
+@@ -0,0 +1,320 @@
++/*
++ * RTC driver for the Armada 38x Marvell SoCs
++ *
++ * Copyright (C) 2015 Marvell
++ *
++ * Gregory Clement <gregory.clement@free-electrons.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ */
++
++#include <linux/delay.h>
++#include <linux/io.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/platform_device.h>
++#include <linux/rtc.h>
++
++#define RTC_STATUS 0x0
++#define RTC_STATUS_ALARM1 BIT(0)
++#define RTC_STATUS_ALARM2 BIT(1)
++#define RTC_IRQ1_CONF 0x4
++#define RTC_IRQ1_AL_EN BIT(0)
++#define RTC_IRQ1_FREQ_EN BIT(1)
++#define RTC_IRQ1_FREQ_1HZ BIT(2)
++#define RTC_TIME 0xC
++#define RTC_ALARM1 0x10
++
++#define SOC_RTC_INTERRUPT 0x8
++#define SOC_RTC_ALARM1 BIT(0)
++#define SOC_RTC_ALARM2 BIT(1)
++#define SOC_RTC_ALARM1_MASK BIT(2)
++#define SOC_RTC_ALARM2_MASK BIT(3)
++
++struct armada38x_rtc {
++ struct rtc_device *rtc_dev;
++ void __iomem *regs;
++ void __iomem *regs_soc;
++ spinlock_t lock;
++ int irq;
++};
++
++/*
++ * According to the datasheet, the OS should wait 5us after every
++ * register write to the RTC hard macro so that the required update
++ * can occur without holding off the system bus
++ */
++static void rtc_delayed_write(u32 val, struct armada38x_rtc *rtc, int offset)
++{
++ writel(val, rtc->regs + offset);
++ udelay(5);
++}
++
++static int armada38x_rtc_read_time(struct device *dev, struct rtc_time *tm)
++{
++ struct armada38x_rtc *rtc = dev_get_drvdata(dev);
++ unsigned long time, time_check, flags;
++
++ spin_lock_irqsave(&rtc->lock, flags);
++
++ time = readl(rtc->regs + RTC_TIME);
++ /*
++ * WA for failing time set attempts. As stated in HW ERRATA if
++ * more than one second between two time reads is detected
++ * then read once again.
++ */
++ time_check = readl(rtc->regs + RTC_TIME);
++ if ((time_check - time) > 1)
++ time_check = readl(rtc->regs + RTC_TIME);
++
++ spin_unlock_irqrestore(&rtc->lock, flags);
++
++ rtc_time_to_tm(time_check, tm);
++
++ return 0;
++}
++
++static int armada38x_rtc_set_time(struct device *dev, struct rtc_time *tm)
++{
++ struct armada38x_rtc *rtc = dev_get_drvdata(dev);
++ int ret = 0;
++ unsigned long time, flags;
++
++ ret = rtc_tm_to_time(tm, &time);
++
++ if (ret)
++ goto out;
++ /*
++ * Setting the RTC time not always succeeds. According to the
++ * errata we need to first write on the status register and
++ * then wait for 100ms before writing to the time register to be
++ * sure that the data will be taken into account.
++ */
++ spin_lock_irqsave(&rtc->lock, flags);
++
++ rtc_delayed_write(0, rtc, RTC_STATUS);
++
++ spin_unlock_irqrestore(&rtc->lock, flags);
++
++ msleep(100);
++
++ spin_lock_irqsave(&rtc->lock, flags);
++
++ rtc_delayed_write(time, rtc, RTC_TIME);
++
++ spin_unlock_irqrestore(&rtc->lock, flags);
++out:
++ return ret;
++}
++
++static int armada38x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
++{
++ struct armada38x_rtc *rtc = dev_get_drvdata(dev);
++ unsigned long time, flags;
++ u32 val;
++
++ spin_lock_irqsave(&rtc->lock, flags);
++
++ time = readl(rtc->regs + RTC_ALARM1);
++ val = readl(rtc->regs + RTC_IRQ1_CONF) & RTC_IRQ1_AL_EN;
++
++ spin_unlock_irqrestore(&rtc->lock, flags);
++
++ alrm->enabled = val ? 1 : 0;
++ rtc_time_to_tm(time, &alrm->time);
++
++ return 0;
++}
++
++static int armada38x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
++{
++ struct armada38x_rtc *rtc = dev_get_drvdata(dev);
++ unsigned long time, flags;
++ int ret = 0;
++ u32 val;
++
++ ret = rtc_tm_to_time(&alrm->time, &time);
++
++ if (ret)
++ goto out;
++
++ spin_lock_irqsave(&rtc->lock, flags);
++
++ rtc_delayed_write(time, rtc, RTC_ALARM1);
++
++ if (alrm->enabled) {
++ rtc_delayed_write(RTC_IRQ1_AL_EN, rtc, RTC_IRQ1_CONF);
++ val = readl(rtc->regs_soc + SOC_RTC_INTERRUPT);
++ writel(val | SOC_RTC_ALARM1_MASK,
++ rtc->regs_soc + SOC_RTC_INTERRUPT);
++ }
++
++ spin_unlock_irqrestore(&rtc->lock, flags);
++
++out:
++ return ret;
++}
++
++static int armada38x_rtc_alarm_irq_enable(struct device *dev,
++ unsigned int enabled)
++{
++ struct armada38x_rtc *rtc = dev_get_drvdata(dev);
++ unsigned long flags;
++
++ spin_lock_irqsave(&rtc->lock, flags);
++
++ if (enabled)
++ rtc_delayed_write(RTC_IRQ1_AL_EN, rtc, RTC_IRQ1_CONF);
++ else
++ rtc_delayed_write(0, rtc, RTC_IRQ1_CONF);
++
++ spin_unlock_irqrestore(&rtc->lock, flags);
++
++ return 0;
++}
++
++static irqreturn_t armada38x_rtc_alarm_irq(int irq, void *data)
++{
++ struct armada38x_rtc *rtc = data;
++ u32 val;
++ int event = RTC_IRQF | RTC_AF;
++
++ dev_dbg(&rtc->rtc_dev->dev, "%s:irq(%d)\n", __func__, irq);
++
++ spin_lock(&rtc->lock);
++
++ val = readl(rtc->regs_soc + SOC_RTC_INTERRUPT);
++
++ writel(val & ~SOC_RTC_ALARM1, rtc->regs_soc + SOC_RTC_INTERRUPT);
++ val = readl(rtc->regs + RTC_IRQ1_CONF);
++ /* disable all the interrupts for alarm 1 */
++ rtc_delayed_write(0, rtc, RTC_IRQ1_CONF);
++ /* Ack the event */
++ rtc_delayed_write(RTC_STATUS_ALARM1, rtc, RTC_STATUS);
++
++ spin_unlock(&rtc->lock);
++
++ if (val & RTC_IRQ1_FREQ_EN) {
++ if (val & RTC_IRQ1_FREQ_1HZ)
++ event |= RTC_UF;
++ else
++ event |= RTC_PF;
++ }
++
++ rtc_update_irq(rtc->rtc_dev, 1, event);
++
++ return IRQ_HANDLED;
++}
++
++static struct rtc_class_ops armada38x_rtc_ops = {
++ .read_time = armada38x_rtc_read_time,
++ .set_time = armada38x_rtc_set_time,
++ .read_alarm = armada38x_rtc_read_alarm,
++ .set_alarm = armada38x_rtc_set_alarm,
++ .alarm_irq_enable = armada38x_rtc_alarm_irq_enable,
++};
++
++static __init int armada38x_rtc_probe(struct platform_device *pdev)
++{
++ struct resource *res;
++ struct armada38x_rtc *rtc;
++ int ret;
++
++ rtc = devm_kzalloc(&pdev->dev, sizeof(struct armada38x_rtc),
++ GFP_KERNEL);
++ if (!rtc)
++ return -ENOMEM;
++
++ spin_lock_init(&rtc->lock);
++
++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rtc");
++ rtc->regs = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(rtc->regs))
++ return PTR_ERR(rtc->regs);
++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rtc-soc");
++ rtc->regs_soc = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(rtc->regs_soc))
++ return PTR_ERR(rtc->regs_soc);
++
++ rtc->irq = platform_get_irq(pdev, 0);
++
++ if (rtc->irq < 0) {
++ dev_err(&pdev->dev, "no irq\n");
++ return rtc->irq;
++ }
++ if (devm_request_irq(&pdev->dev, rtc->irq, armada38x_rtc_alarm_irq,
++ 0, pdev->name, rtc) < 0) {
++ dev_warn(&pdev->dev, "Interrupt not available.\n");
++ rtc->irq = -1;
++ /*
++ * If there is no interrupt available then we can't
++ * use the alarm
++ */
++ armada38x_rtc_ops.set_alarm = NULL;
++ armada38x_rtc_ops.alarm_irq_enable = NULL;
++ }
++ platform_set_drvdata(pdev, rtc);
++ if (rtc->irq != -1)
++ device_init_wakeup(&pdev->dev, 1);
++
++ rtc->rtc_dev = devm_rtc_device_register(&pdev->dev, pdev->name,
++ &armada38x_rtc_ops, THIS_MODULE);
++ if (IS_ERR(rtc->rtc_dev)) {
++ ret = PTR_ERR(rtc->rtc_dev);
++ dev_err(&pdev->dev, "Failed to register RTC device: %d\n", ret);
++ return ret;
++ }
++ return 0;
++}
++
++#ifdef CONFIG_PM_SLEEP
++static int armada38x_rtc_suspend(struct device *dev)
++{
++ if (device_may_wakeup(dev)) {
++ struct armada38x_rtc *rtc = dev_get_drvdata(dev);
++
++ return enable_irq_wake(rtc->irq);
++ }
++
++ return 0;
++}
++
++static int armada38x_rtc_resume(struct device *dev)
++{
++ if (device_may_wakeup(dev)) {
++ struct armada38x_rtc *rtc = dev_get_drvdata(dev);
++
++ return disable_irq_wake(rtc->irq);
++ }
++
++ return 0;
++}
++#endif
++
++static SIMPLE_DEV_PM_OPS(armada38x_rtc_pm_ops,
++ armada38x_rtc_suspend, armada38x_rtc_resume);
++
++#ifdef CONFIG_OF
++static const struct of_device_id armada38x_rtc_of_match_table[] = {
++ { .compatible = "marvell,armada-380-rtc", },
++ {}
++};
++#endif
++
++static struct platform_driver armada38x_rtc_driver = {
++ .driver = {
++ .name = "armada38x-rtc",
++ .pm = &armada38x_rtc_pm_ops,
++ .of_match_table = of_match_ptr(armada38x_rtc_of_match_table),
++ },
++};
++
++module_platform_driver_probe(armada38x_rtc_driver, armada38x_rtc_probe);
++
++MODULE_DESCRIPTION("Marvell Armada 38x RTC driver");
++MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@free-electrons.com>");
++MODULE_LICENSE("GPL");
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -1136,6 +1136,7 @@ M: Sebastian Hesselbarth <sebastian.hess
+ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+ S: Maintained
+ F: arch/arm/mach-mvebu/
++F: drivers/rtc/armada38x-rtc
+
+ ARM/Marvell Berlin SoC support
+ M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+--- a/arch/arm/boot/dts/armada-38x.dtsi
++++ b/arch/arm/boot/dts/armada-38x.dtsi
+@@ -420,6 +420,13 @@
+ clocks = <&gateclk 4>;
+ };
+
++ rtc@a3800 {
++ compatible = "marvell,armada-380-rtc";
++ reg = <0xa3800 0x20>, <0x184a0 0x0c>;
++ reg-names = "rtc", "rtc-soc";
++ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
++ };
++
+ sata@a8000 {
+ compatible = "marvell,armada-380-ahci";
+ reg = <0xa8000 0x2000>;
projects / openwrt / staging / thess.git / commitdiff