remove now useless patches, thanks rtz

SVN-Revision: 20446

diff --git a/target/linux/rdc/patches-2.6.30/001-rdc3210_flash_map.patch b/target/linux/rdc/patches-2.6.30/001-rdc3210_flash_map.patch
deleted file mode 100644 (file)
index d1ac2e7..0000000
--- a/target/linux/rdc/patches-2.6.30/001-rdc3210_flash_map.patch
+++ /dev/null
@@ -1,63 +0,0 @@
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -123,6 +123,50 @@ config MTD_SUN_UFLASH
-         Sun Microsystems boardsets.  This driver will require CFI support
-         in the kernel, so if you did not enable CFI previously, do that now.
- 
-+config MTD_RDC3210
-+      tristate "CFI Flash device mapped on RDC3210"
-+      depends on X86 && MTD_CFI && MTD_PARTITIONS
-+      help
-+        RDC-3210 is the flash device we find on Ralink reference board.
-+
-+config MTD_RDC3210_STATIC_MAP
-+      bool "Partitions on RDC3210 mapped statically" if MTD_RDC3210
-+      select MTD_RDC3210_FACTORY_PRESENT
-+      help
-+        The mapping driver will use the static partition map for the
-+        RDC-3210 flash device.
-+
-+config MTD_RDC3210_FACTORY_PRESENT
-+      bool "Reserve a partition on RDC3210 for factory presets"
-+      depends on MTD_RDC3210
-+      default y
-+      help
-+        The mapping driver will reserve a partition on the RDC-3210 flash
-+        device for resetting flash contents to factory defaults.
-+
-+config MTD_RDC3210_ALLOW_JFFS2
-+      bool "JFFS2 filesystem usable in a partition on RDC3210"
-+      depends on MTD_RDC3210 && !MTD_RDC3210_STATIC_MAP
-+      help
-+        The mapping driver will align a partition on the RDC-3210 flash
-+        device to an erase-block boundary so that a JFFS2 filesystem may
-+        reside on it.
-+
-+config MTD_RDC3210_SIZE
-+      hex "Amount of flash memory on RDC3210"
-+      depends on MTD_RDC3210
-+      default "0x400000"
-+      help
-+        Total size in bytes of the RDC-3210 flash device
-+
-+config MTD_RDC3210_BUSWIDTH
-+      int "Width of CFI Flash device mapped on RDC3210"
-+      depends on MTD_RDC3210
-+      default "2"
-+      help
-+        Number of bytes addressed on the RDC-3210 flash device before
-+        addressing the same chip again
-+
- config MTD_SC520CDP
-       tristate "CFI Flash device mapped on AMD SC520 CDP"
-       depends on X86 && MTD_CFI && MTD_CONCAT
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -27,6 +27,7 @@ obj-$(CONFIG_MTD_PHYSMAP_OF) += physmap_
- obj-$(CONFIG_MTD_PMC_MSP_EVM)   += pmcmsp-flash.o
- obj-$(CONFIG_MTD_PMC_MSP_RAMROOT)+= pmcmsp-ramroot.o
- obj-$(CONFIG_MTD_PCMCIA)      += pcmciamtd.o
-+obj-$(CONFIG_MTD_RDC3210)     += rdc3210.o
- obj-$(CONFIG_MTD_RPXLITE)     += rpxlite.o
- obj-$(CONFIG_MTD_TQM8XXL)     += tqm8xxl.o
- obj-$(CONFIG_MTD_SA1100)      += sa1100-flash.o

diff --git a/target/linux/rdc/patches-2.6.30/008-r8610_flash_map.patch b/target/linux/rdc/patches-2.6.30/008-r8610_flash_map.patch
deleted file mode 100644 (file)
index b374c06..0000000
--- a/target/linux/rdc/patches-2.6.30/008-r8610_flash_map.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -167,6 +167,12 @@ config MTD_RDC3210_BUSWIDTH
-         Number of bytes addressed on the RDC-3210 flash device before
-         addressing the same chip again
- 
-+config MTD_R8610
-+      tristate "CFI flash device mapped on R8610"
-+      depends on X86 && MTD_CFI && MTD_PARTITIONS
-+      help
-+        Flash support for the RDC R8610 evaluation board.
-+
- config MTD_SC520CDP
-       tristate "CFI Flash device mapped on AMD SC520 CDP"
-       depends on X86 && MTD_CFI && MTD_CONCAT
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -28,6 +28,7 @@ obj-$(CONFIG_MTD_PMC_MSP_EVM)   += pmcms
- obj-$(CONFIG_MTD_PMC_MSP_RAMROOT)+= pmcmsp-ramroot.o
- obj-$(CONFIG_MTD_PCMCIA)      += pcmciamtd.o
- obj-$(CONFIG_MTD_RDC3210)     += rdc3210.o
-+obj-$(CONFIG_MTD_R8610)               += r8610.o
- obj-$(CONFIG_MTD_RPXLITE)     += rpxlite.o
- obj-$(CONFIG_MTD_TQM8XXL)     += tqm8xxl.o
- obj-$(CONFIG_MTD_SA1100)      += sa1100-flash.o

diff --git a/target/linux/rdc/patches-2.6.32/001-rdc3210_flash_map.patch b/target/linux/rdc/patches-2.6.32/001-rdc3210_flash_map.patch
deleted file mode 100644 (file)
index 01b4162..0000000
--- a/target/linux/rdc/patches-2.6.32/001-rdc3210_flash_map.patch
+++ /dev/null
@@ -1,63 +0,0 @@
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -114,6 +114,50 @@ config MTD_SUN_UFLASH
-         Sun Microsystems boardsets.  This driver will require CFI support
-         in the kernel, so if you did not enable CFI previously, do that now.
- 
-+config MTD_RDC3210
-+      tristate "CFI Flash device mapped on RDC3210"
-+      depends on X86 && MTD_CFI && MTD_PARTITIONS
-+      help
-+        RDC-3210 is the flash device we find on Ralink reference board.
-+
-+config MTD_RDC3210_STATIC_MAP
-+      bool "Partitions on RDC3210 mapped statically" if MTD_RDC3210
-+      select MTD_RDC3210_FACTORY_PRESENT
-+      help
-+        The mapping driver will use the static partition map for the
-+        RDC-3210 flash device.
-+
-+config MTD_RDC3210_FACTORY_PRESENT
-+      bool "Reserve a partition on RDC3210 for factory presets"
-+      depends on MTD_RDC3210
-+      default y
-+      help
-+        The mapping driver will reserve a partition on the RDC-3210 flash
-+        device for resetting flash contents to factory defaults.
-+
-+config MTD_RDC3210_ALLOW_JFFS2
-+      bool "JFFS2 filesystem usable in a partition on RDC3210"
-+      depends on MTD_RDC3210 && !MTD_RDC3210_STATIC_MAP
-+      help
-+        The mapping driver will align a partition on the RDC-3210 flash
-+        device to an erase-block boundary so that a JFFS2 filesystem may
-+        reside on it.
-+
-+config MTD_RDC3210_SIZE
-+      hex "Amount of flash memory on RDC3210"
-+      depends on MTD_RDC3210
-+      default "0x400000"
-+      help
-+        Total size in bytes of the RDC-3210 flash device
-+
-+config MTD_RDC3210_BUSWIDTH
-+      int "Width of CFI Flash device mapped on RDC3210"
-+      depends on MTD_RDC3210
-+      default "2"
-+      help
-+        Number of bytes addressed on the RDC-3210 flash device before
-+        addressing the same chip again
-+
- config MTD_SC520CDP
-       tristate "CFI Flash device mapped on AMD SC520 CDP"
-       depends on X86 && MTD_CFI && MTD_CONCAT
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -26,6 +26,7 @@ obj-$(CONFIG_MTD_PHYSMAP)    += physmap.o
- obj-$(CONFIG_MTD_PHYSMAP_OF)  += physmap_of.o
- obj-$(CONFIG_MTD_PMC_MSP_EVM)   += pmcmsp-flash.o
- obj-$(CONFIG_MTD_PCMCIA)      += pcmciamtd.o
-+obj-$(CONFIG_MTD_RDC3210)     += rdc3210.o
- obj-$(CONFIG_MTD_RPXLITE)     += rpxlite.o
- obj-$(CONFIG_MTD_TQM8XXL)     += tqm8xxl.o
- obj-$(CONFIG_MTD_SA1100)      += sa1100-flash.o

diff --git a/target/linux/rdc/patches-2.6.32/008-r8610_flash_map.patch b/target/linux/rdc/patches-2.6.32/008-r8610_flash_map.patch
deleted file mode 100644 (file)
index 0f06beb..0000000
--- a/target/linux/rdc/patches-2.6.32/008-r8610_flash_map.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -158,6 +158,12 @@ config MTD_RDC3210_BUSWIDTH
-         Number of bytes addressed on the RDC-3210 flash device before
-         addressing the same chip again
- 
-+config MTD_R8610
-+      tristate "CFI flash device mapped on R8610"
-+      depends on X86 && MTD_CFI && MTD_PARTITIONS
-+      help
-+        Flash support for the RDC R8610 evaluation board.
-+
- config MTD_SC520CDP
-       tristate "CFI Flash device mapped on AMD SC520 CDP"
-       depends on X86 && MTD_CFI && MTD_CONCAT
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -27,6 +27,7 @@ obj-$(CONFIG_MTD_PHYSMAP_OF) += physmap_
- obj-$(CONFIG_MTD_PMC_MSP_EVM)   += pmcmsp-flash.o
- obj-$(CONFIG_MTD_PCMCIA)      += pcmciamtd.o
- obj-$(CONFIG_MTD_RDC3210)     += rdc3210.o
-+obj-$(CONFIG_MTD_R8610)               += r8610.o
- obj-$(CONFIG_MTD_RPXLITE)     += rpxlite.o
- obj-$(CONFIG_MTD_TQM8XXL)     += tqm8xxl.o
- obj-$(CONFIG_MTD_SA1100)      += sa1100-flash.o