--- /dev/null
+From 7a69da907de668fb22a30ae218062d6f081864ea Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sat, 17 Aug 2013 19:31:41 +0200
+Subject: [PATCH] rt2x00: rt2800lib: move rt2800_drv_data declaration into
+ rt2800lib.h
+
+The rt2800_drv_data structure contains driver specific
+information. Move the declaration into the rt2800lib.h
+header which is a more logical place for it. Also fix
+the comment style to avoid checkpatch warning.
+
+The patch contains no functional changes, it is in
+preparation for the next patch.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+Changes since v1: ---
+---
+ drivers/net/wireless/rt2x00/rt2800.h | 13 -------------
+ drivers/net/wireless/rt2x00/rt2800lib.h | 11 +++++++++++
+ 2 files changed, 11 insertions(+), 13 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800.h
++++ b/drivers/net/wireless/rt2x00/rt2800.h
+@@ -2958,17 +2958,4 @@ enum rt2800_eeprom_word {
+ */
+ #define BCN_TBTT_OFFSET 64
+
+-/*
+- * RT2800 driver data structure
+- */
+-struct rt2800_drv_data {
+- u8 calibration_bw20;
+- u8 calibration_bw40;
+- u8 bbp25;
+- u8 bbp26;
+- u8 txmixer_gain_24g;
+- u8 txmixer_gain_5g;
+- unsigned int tbtt_tick;
+-};
+-
+ #endif /* RT2800_H */
+--- a/drivers/net/wireless/rt2x00/rt2800lib.h
++++ b/drivers/net/wireless/rt2x00/rt2800lib.h
+@@ -20,6 +20,17 @@
+ #ifndef RT2800LIB_H
+ #define RT2800LIB_H
+
++/* RT2800 driver data structure */
++struct rt2800_drv_data {
++ u8 calibration_bw20;
++ u8 calibration_bw40;
++ u8 bbp25;
++ u8 bbp26;
++ u8 txmixer_gain_24g;
++ u8 txmixer_gain_5g;
++ unsigned int tbtt_tick;
++};
++
+ struct rt2800_ops {
+ void (*register_read)(struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset, u32 *value);
--- /dev/null
+From a7f268af31dddf763fe3dbe9cbf96ea77e0540e0 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sat, 17 Aug 2013 19:31:41 +0200
+Subject: [PATCH] rt2x00: rt2800lib: introduce RT2800_HAS_HIGH_SHARED_MEM flag
+
+Some chipsets have more than 16KB of shared memory.
+Introduce a new rt2800 specific flag to indicate that
+and add a helper function which helps to check the
+presence of the new flag.
+
+Also enable the new flag for the RT3593 chipset which
+has 24KB of shared memory. The flag can also be used
+for other chipsets, but none of those has been tested
+yet.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+Changes since v1:
+ - don't enable the new flag for RT3071 and RT5592
+---
+ drivers/net/wireless/rt2x00/rt2800lib.c | 4 ++++
+ drivers/net/wireless/rt2x00/rt2800lib.h | 13 +++++++++++++
+ 2 files changed, 17 insertions(+)
+
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -7712,6 +7712,7 @@ static int rt2800_probe_rt(struct rt2x00
+
+ int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev)
+ {
++ struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
+ int retval;
+ u32 reg;
+
+@@ -7719,6 +7720,9 @@ int rt2800_probe_hw(struct rt2x00_dev *r
+ if (retval)
+ return retval;
+
++ if (rt2x00_rt(rt2x00dev, RT3593))
++ __set_bit(RT2800_HAS_HIGH_SHARED_MEM, &drv_data->rt2800_flags);
++
+ /*
+ * Allocate eeprom data.
+ */
+--- a/drivers/net/wireless/rt2x00/rt2800lib.h
++++ b/drivers/net/wireless/rt2x00/rt2800lib.h
+@@ -20,6 +20,10 @@
+ #ifndef RT2800LIB_H
+ #define RT2800LIB_H
+
++enum rt2800_flag {
++ RT2800_HAS_HIGH_SHARED_MEM,
++};
++
+ /* RT2800 driver data structure */
+ struct rt2800_drv_data {
+ u8 calibration_bw20;
+@@ -29,6 +33,8 @@ struct rt2800_drv_data {
+ u8 txmixer_gain_24g;
+ u8 txmixer_gain_5g;
+ unsigned int tbtt_tick;
++
++ unsigned long rt2800_flags;
+ };
+
+ struct rt2800_ops {
+@@ -61,6 +67,13 @@ struct rt2800_ops {
+ __le32 *(*drv_get_txwi)(struct queue_entry *entry);
+ };
+
++static inline bool rt2800_has_high_shared_mem(struct rt2x00_dev *rt2x00dev)
++{
++ struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
++
++ return test_bit(RT2800_HAS_HIGH_SHARED_MEM, &drv_data->rt2800_flags);
++}
++
+ static inline void rt2800_register_read(struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset,
+ u32 *value)
--- /dev/null
+From 250a1b520cd7fdc0df4fc3fedea9066913f49ecf Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sat, 17 Aug 2013 19:31:42 +0200
+Subject: [PATCH] rt2x00: rt2800: serialize shared memory access
+
+The shared memory of the rt2800 devices is accessible
+through the register offset range between 0x4000 and
+0x8000. The size of this range is 16KB only and on
+devices which have more than 16KB of shared memory either
+the low or the high part of the memory is accessible at a
+time.
+
+Serialize all accesses to the shared memory by a mutex,
+in order to avoid concurrent use of that.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+Changes since v1: ---
+---
+ drivers/net/wireless/rt2x00/rt2800lib.c | 55 +++++++++++++++++++++++++++++-
+ drivers/net/wireless/rt2x00/rt2800lib.h | 32 +++++++++++++++++
+ drivers/net/wireless/rt2x00/rt2800mmio.c | 26 ++++++++++++++
+ drivers/net/wireless/rt2x00/rt2800mmio.h | 4 +++
+ drivers/net/wireless/rt2x00/rt2800pci.c | 14 ++++++++
+ drivers/net/wireless/rt2x00/rt2800soc.c | 3 ++
+ drivers/net/wireless/rt2x00/rt2800usb.c | 31 +++++++++++++++++
+ 7 files changed, 164 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -451,11 +451,13 @@ void rt2800_mcu_request(struct rt2x00_de
+ rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token);
+ rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0);
+ rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG1, arg1);
++ rt2800_shared_mem_lock(rt2x00dev);
+ rt2800_register_write_lock(rt2x00dev, H2M_MAILBOX_CSR, reg);
+
+ reg = 0;
+ rt2x00_set_field32(®, HOST_CMD_CSR_HOST_COMMAND, command);
+ rt2800_register_write_lock(rt2x00dev, HOST_CMD_CSR, reg);
++ rt2800_shared_mem_unlock(rt2x00dev);
+ }
+
+ mutex_unlock(&rt2x00dev->csr_mutex);
+@@ -674,7 +676,9 @@ int rt2800_load_firmware(struct rt2x00_d
+ * Wait for device to stabilize.
+ */
+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
++ rt2800_shared_mem_lock(rt2x00dev);
+ rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, ®);
++ rt2800_shared_mem_unlock(rt2x00dev);
+ if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY))
+ break;
+ msleep(1);
+@@ -694,10 +698,16 @@ int rt2800_load_firmware(struct rt2x00_d
+ /*
+ * Initialize firmware.
+ */
++ rt2800_shared_mem_lock(rt2x00dev);
+ rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
+ rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
++ rt2800_shared_mem_unlock(rt2x00dev);
++
+ if (rt2x00_is_usb(rt2x00dev)) {
++ rt2800_shared_mem_lock(rt2x00dev);
+ rt2800_register_write(rt2x00dev, H2M_INT_SRC, 0);
++ rt2800_shared_mem_unlock(rt2x00dev);
++
+ rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0);
+ }
+ msleep(1);
+@@ -1001,8 +1011,10 @@ void rt2800_write_beacon(struct queue_en
+
+ beacon_base = rt2800_hw_beacon_base(rt2x00dev, entry->entry_idx);
+
++ rt2800_shared_mem_lock(rt2x00dev);
+ rt2800_register_multiwrite(rt2x00dev, beacon_base, entry->skb->data,
+ entry->skb->len + padding_len);
++ rt2800_shared_mem_unlock(rt2x00dev);
+
+ /*
+ * Enable beaconing again.
+@@ -1027,6 +1039,8 @@ static inline void rt2800_clear_beacon_r
+
+ beacon_base = rt2800_hw_beacon_base(rt2x00dev, index);
+
++ rt2800_shared_mem_lock(rt2x00dev);
++
+ /*
+ * For the Beacon base registers we only need to clear
+ * the whole TXWI which (when set to 0) will invalidate
+@@ -1034,6 +1048,8 @@ static inline void rt2800_clear_beacon_r
+ */
+ for (i = 0; i < txwi_desc_size; i += sizeof(__le32))
+ rt2800_register_write(rt2x00dev, beacon_base + i, 0);
++
++ rt2800_shared_mem_unlock(rt2x00dev);
+ }
+
+ void rt2800_clear_beacon(struct queue_entry *entry)
+@@ -1217,7 +1233,9 @@ static void rt2800_delete_wcid_attr(stru
+ {
+ u32 offset;
+ offset = MAC_WCID_ATTR_ENTRY(wcid);
++ rt2800_shared_mem_lock(rt2x00dev);
+ rt2800_register_write(rt2x00dev, offset, 0);
++ rt2800_shared_mem_unlock(rt2x00dev);
+ }
+
+ static void rt2800_config_wcid_attr_bssidx(struct rt2x00_dev *rt2x00dev,
+@@ -1230,11 +1248,13 @@ static void rt2800_config_wcid_attr_bssi
+ * The BSS Idx numbers is split in a main value of 3 bits,
+ * and a extended field for adding one additional bit to the value.
+ */
++ rt2800_shared_mem_lock(rt2x00dev);
+ rt2800_register_read(rt2x00dev, offset, ®);
+ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX, (bssidx & 0x7));
+ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX_EXT,
+ (bssidx & 0x8) >> 3);
+ rt2800_register_write(rt2x00dev, offset, reg);
++ rt2800_shared_mem_unlock(rt2x00dev);
+ }
+
+ static void rt2800_config_wcid_attr_cipher(struct rt2x00_dev *rt2x00dev,
+@@ -1247,6 +1267,7 @@ static void rt2800_config_wcid_attr_ciph
+
+ offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx);
+
++ rt2800_shared_mem_lock(rt2x00dev);
+ if (crypto->cmd == SET_KEY) {
+ rt2800_register_read(rt2x00dev, offset, ®);
+ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB,
+@@ -1271,6 +1292,7 @@ static void rt2800_config_wcid_attr_ciph
+ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, 0);
+ rt2800_register_write(rt2x00dev, offset, reg);
+ }
++ rt2800_shared_mem_unlock(rt2x00dev);
+
+ offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
+
+@@ -1280,8 +1302,11 @@ static void rt2800_config_wcid_attr_ciph
+ (crypto->cipher == CIPHER_AES))
+ iveiv_entry.iv[3] |= 0x20;
+ iveiv_entry.iv[3] |= key->keyidx << 6;
++
++ rt2800_shared_mem_lock(rt2x00dev);
+ rt2800_register_multiwrite(rt2x00dev, offset,
+ &iveiv_entry, sizeof(iveiv_entry));
++ rt2800_shared_mem_unlock(rt2x00dev);
+ }
+
+ int rt2800_config_shared_key(struct rt2x00_dev *rt2x00dev,
+@@ -1304,8 +1329,11 @@ int rt2800_config_shared_key(struct rt2x
+ sizeof(key_entry.rx_mic));
+
+ offset = SHARED_KEY_ENTRY(key->hw_key_idx);
++
++ rt2800_shared_mem_lock(rt2x00dev);
+ rt2800_register_multiwrite(rt2x00dev, offset,
+ &key_entry, sizeof(key_entry));
++ rt2800_shared_mem_unlock(rt2x00dev);
+ }
+
+ /*
+@@ -1320,10 +1348,12 @@ int rt2800_config_shared_key(struct rt2x
+
+ offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
+
++ rt2800_shared_mem_lock(rt2x00dev);
+ rt2800_register_read(rt2x00dev, offset, ®);
+ rt2x00_set_field32(®, field,
+ (crypto->cmd == SET_KEY) * crypto->cipher);
+ rt2800_register_write(rt2x00dev, offset, reg);
++ rt2800_shared_mem_unlock(rt2x00dev);
+
+ /*
+ * Update WCID information
+@@ -1393,8 +1423,11 @@ int rt2800_config_pairwise_key(struct rt
+ sizeof(key_entry.rx_mic));
+
+ offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
++
++ rt2800_shared_mem_lock(rt2x00dev);
+ rt2800_register_multiwrite(rt2x00dev, offset,
+ &key_entry, sizeof(key_entry));
++ rt2800_shared_mem_unlock(rt2x00dev);
+ }
+
+ /*
+@@ -4876,14 +4909,19 @@ static int rt2800_init_registers(struct
+ /*
+ * ASIC will keep garbage value after boot, clear encryption keys.
+ */
++ rt2800_shared_mem_lock(rt2x00dev);
+ for (i = 0; i < 4; i++)
+ rt2800_register_write(rt2x00dev,
+ SHARED_KEY_MODE_ENTRY(i), 0);
++ rt2800_shared_mem_unlock(rt2x00dev);
+
+ for (i = 0; i < 256; i++) {
+ rt2800_config_wcid(rt2x00dev, NULL, i);
+ rt2800_delete_wcid_attr(rt2x00dev, i);
++
++ rt2800_shared_mem_lock(rt2x00dev);
+ rt2800_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0);
++ rt2800_shared_mem_unlock(rt2x00dev);
+ }
+
+ /*
+@@ -5009,8 +5047,10 @@ static int rt2800_wait_bbp_ready(struct
+ * BBP was enabled after firmware was loaded,
+ * but we need to reactivate it now.
+ */
++ rt2800_shared_mem_lock(rt2x00dev);
+ rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
+ rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
++ rt2800_shared_mem_unlock(rt2x00dev);
+ msleep(1);
+
+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+@@ -6706,11 +6746,19 @@ int rt2800_enable_radio(struct rt2x00_de
+ /*
+ * Send signal during boot time to initialize firmware.
+ */
++ rt2800_shared_mem_lock(rt2x00dev);
+ rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
+ rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+- if (rt2x00_is_usb(rt2x00dev))
++ rt2800_shared_mem_unlock(rt2x00dev);
++
++ if (rt2x00_is_usb(rt2x00dev)) {
++ rt2800_shared_mem_lock(rt2x00dev);
+ rt2800_register_write(rt2x00dev, H2M_INT_SRC, 0);
++ rt2800_shared_mem_unlock(rt2x00dev);
++ }
++
+ rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0);
++
+ msleep(1);
+
+ /*
+@@ -7716,6 +7764,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r
+ int retval;
+ u32 reg;
+
++ rt2800_shared_mem_init_lock(rt2x00dev);
++
+ retval = rt2800_probe_rt(rt2x00dev);
+ if (retval)
+ return retval;
+@@ -7795,8 +7845,11 @@ void rt2800_get_tkip_seq(struct ieee8021
+ u32 offset;
+
+ offset = MAC_IVEIV_ENTRY(hw_key_idx);
++
++ rt2800_shared_mem_lock(rt2x00dev);
+ rt2800_register_multiread(rt2x00dev, offset,
+ &iveiv_entry, sizeof(iveiv_entry));
++ rt2800_shared_mem_unlock(rt2x00dev);
+
+ memcpy(iv16, &iveiv_entry.iv[0], sizeof(*iv16));
+ memcpy(iv32, &iveiv_entry.iv[4], sizeof(*iv32));
+--- a/drivers/net/wireless/rt2x00/rt2800lib.h
++++ b/drivers/net/wireless/rt2x00/rt2800lib.h
+@@ -35,6 +35,11 @@ struct rt2800_drv_data {
+ unsigned int tbtt_tick;
+
+ unsigned long rt2800_flags;
++
++ union {
++ spinlock_t spin;
++ struct mutex mutex;
++ } shmem_lock;
+ };
+
+ struct rt2800_ops {
+@@ -65,6 +70,10 @@ struct rt2800_ops {
+ const u8 *data, const size_t len);
+ int (*drv_init_registers)(struct rt2x00_dev *rt2x00dev);
+ __le32 *(*drv_get_txwi)(struct queue_entry *entry);
++
++ void (*shmem_init_lock)(struct rt2x00_dev *rt2x00dev);
++ void (*shmem_lock)(struct rt2x00_dev *rt2x00dev);
++ void (*shmem_unlock)(struct rt2x00_dev *rt2x00dev);
+ };
+
+ static inline bool rt2800_has_high_shared_mem(struct rt2x00_dev *rt2x00dev)
+@@ -74,6 +83,29 @@ static inline bool rt2800_has_high_share
+ return test_bit(RT2800_HAS_HIGH_SHARED_MEM, &drv_data->rt2800_flags);
+ }
+
++static inline void rt2800_shared_mem_init_lock(struct rt2x00_dev *rt2x00dev)
++{
++ const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
++
++ rt2800ops->shmem_init_lock(rt2x00dev);
++}
++
++static inline void rt2800_shared_mem_lock(struct rt2x00_dev *rt2x00dev)
++{
++ const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
++
++ if (rt2800_has_high_shared_mem(rt2x00dev))
++ rt2800ops->shmem_lock(rt2x00dev);
++}
++
++static inline void rt2800_shared_mem_unlock(struct rt2x00_dev *rt2x00dev)
++{
++ const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
++
++ if (rt2800_has_high_shared_mem(rt2x00dev))
++ rt2800ops->shmem_unlock(rt2x00dev);
++}
++
+ static inline void rt2800_register_read(struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset,
+ u32 *value)
+--- a/drivers/net/wireless/rt2x00/rt2800mmio.c
++++ b/drivers/net/wireless/rt2x00/rt2800mmio.c
+@@ -820,8 +820,10 @@ int rt2800mmio_init_registers(struct rt2
+ rt2x00_set_field32(®, WPDMA_RST_IDX_DRX_IDX0, 1);
+ rt2x00mmio_register_write(rt2x00dev, WPDMA_RST_IDX, reg);
+
++ rt2800_shared_mem_lock(rt2x00dev);
+ rt2x00mmio_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f);
+ rt2x00mmio_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00);
++ rt2800_shared_mem_unlock(rt2x00dev);
+
+ if (rt2x00_is_pcie(rt2x00dev) &&
+ (rt2x00_rt(rt2x00dev, RT3090) ||
+@@ -865,6 +867,30 @@ int rt2800mmio_enable_radio(struct rt2x0
+ }
+ EXPORT_SYMBOL_GPL(rt2800mmio_enable_radio);
+
++void rt2800mmio_shmem_init_lock(struct rt2x00_dev *rt2x00dev)
++{
++ struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
++
++ spin_lock_init(&drv_data->shmem_lock.spin);
++}
++EXPORT_SYMBOL_GPL(rt2800mmio_shmem_init_lock);
++
++void rt2800mmio_shmem_lock(struct rt2x00_dev *rt2x00dev)
++{
++ struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
++
++ spin_lock_bh(&drv_data->shmem_lock.spin);
++}
++EXPORT_SYMBOL_GPL(rt2800mmio_shmem_lock);
++
++void rt2800mmio_shmem_unlock(struct rt2x00_dev *rt2x00dev)
++{
++ struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
++
++ spin_unlock_bh(&drv_data->shmem_lock.spin);
++}
++EXPORT_SYMBOL_GPL(rt2800mmio_shmem_unlock);
++
+ MODULE_AUTHOR(DRV_PROJECT);
+ MODULE_VERSION(DRV_VERSION);
+ MODULE_DESCRIPTION("rt2800 MMIO library");
+--- a/drivers/net/wireless/rt2x00/rt2800mmio.h
++++ b/drivers/net/wireless/rt2x00/rt2800mmio.h
+@@ -160,4 +160,8 @@ int rt2800mmio_init_registers(struct rt2
+ /* Device state switch handlers. */
+ int rt2800mmio_enable_radio(struct rt2x00_dev *rt2x00dev);
+
++void rt2800mmio_shmem_init_lock(struct rt2x00_dev *rt2x00dev);
++void rt2800mmio_shmem_lock(struct rt2x00_dev *rt2x00dev);
++void rt2800mmio_shmem_unlock(struct rt2x00_dev *rt2x00dev);
++
+ #endif /* RT2800MMIO_H */
+--- a/drivers/net/wireless/rt2x00/rt2800pci.c
++++ b/drivers/net/wireless/rt2x00/rt2800pci.c
+@@ -69,7 +69,9 @@ static void rt2800pci_mcu_status(struct
+ return;
+
+ for (i = 0; i < 200; i++) {
++ rt2800_shared_mem_lock(rt2x00dev);
+ rt2x00mmio_register_read(rt2x00dev, H2M_MAILBOX_CID, ®);
++ rt2800_shared_mem_unlock(rt2x00dev);
+
+ if ((rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD0) == token) ||
+ (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD1) == token) ||
+@@ -83,8 +85,10 @@ static void rt2800pci_mcu_status(struct
+ if (i == 200)
+ rt2x00_err(rt2x00dev, "MCU request failed, no response from hardware\n");
+
++ rt2800_shared_mem_lock(rt2x00dev);
+ rt2x00mmio_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
+ rt2x00mmio_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
++ rt2800_shared_mem_unlock(rt2x00dev);
+ }
+
+ static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
+@@ -184,6 +188,8 @@ static int rt2800pci_write_firmware(stru
+ */
+ reg = 0;
+ rt2x00_set_field32(®, PBF_SYS_CTRL_HOST_RAM_WRITE, 1);
++
++ rt2800_shared_mem_lock(rt2x00dev);
+ rt2x00mmio_register_write(rt2x00dev, PBF_SYS_CTRL, reg);
+
+ /*
+@@ -197,6 +203,7 @@ static int rt2800pci_write_firmware(stru
+
+ rt2x00mmio_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
+ rt2x00mmio_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
++ rt2800_shared_mem_unlock(rt2x00dev);
+
+ return 0;
+ }
+@@ -213,8 +220,10 @@ static int rt2800pci_enable_radio(struct
+ return retval;
+
+ /* After resume MCU_BOOT_SIGNAL will trash these. */
++ rt2800_shared_mem_lock(rt2x00dev);
+ rt2x00mmio_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
+ rt2x00mmio_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
++ rt2800_shared_mem_unlock(rt2x00dev);
+
+ rt2800_mcu_request(rt2x00dev, MCU_SLEEP, TOKEN_RADIO_OFF, 0xff, 0x02);
+ rt2800pci_mcu_status(rt2x00dev, TOKEN_RADIO_OFF);
+@@ -233,10 +242,12 @@ static int rt2800pci_set_state(struct rt
+ 0, 0x02);
+ rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKEUP);
+ } else if (state == STATE_SLEEP) {
++ rt2800_shared_mem_lock(rt2x00dev);
+ rt2x00mmio_register_write(rt2x00dev, H2M_MAILBOX_STATUS,
+ 0xffffffff);
+ rt2x00mmio_register_write(rt2x00dev, H2M_MAILBOX_CID,
+ 0xffffffff);
++ rt2800_shared_mem_unlock(rt2x00dev);
+ rt2800_mcu_request(rt2x00dev, MCU_SLEEP, TOKEN_SLEEP,
+ 0xff, 0x01);
+ }
+@@ -337,6 +348,9 @@ static const struct rt2800_ops rt2800pci
+ .drv_write_firmware = rt2800pci_write_firmware,
+ .drv_init_registers = rt2800mmio_init_registers,
+ .drv_get_txwi = rt2800mmio_get_txwi,
++ .shmem_init_lock = rt2800mmio_shmem_init_lock,
++ .shmem_lock = rt2800mmio_shmem_lock,
++ .shmem_unlock = rt2800mmio_shmem_unlock,
+ };
+
+ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
+--- a/drivers/net/wireless/rt2x00/rt2800soc.c
++++ b/drivers/net/wireless/rt2x00/rt2800soc.c
+@@ -176,6 +176,9 @@ static const struct rt2800_ops rt2800soc
+ .drv_write_firmware = rt2800soc_write_firmware,
+ .drv_init_registers = rt2800mmio_init_registers,
+ .drv_get_txwi = rt2800mmio_get_txwi,
++ .shmem_init_lock = rt2800mmio_shmem_init_lock,
++ .shmem_lock = rt2800mmio_shmem_lock,
++ .shmem_unlock = rt2800mmio_shmem_unlock,
+ };
+
+ static const struct rt2x00lib_ops rt2800soc_rt2x00_ops = {
+--- a/drivers/net/wireless/rt2x00/rt2800usb.c
++++ b/drivers/net/wireless/rt2x00/rt2800usb.c
+@@ -51,6 +51,27 @@ static bool rt2800usb_hwcrypt_disabled(s
+ return modparam_nohwcrypt;
+ }
+
++static void rt2800usb_shmem_init_lock(struct rt2x00_dev *rt2x00dev)
++{
++ struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
++
++ mutex_init(&drv_data->shmem_lock.mutex);
++}
++
++static void rt2800usb_shmem_lock(struct rt2x00_dev *rt2x00dev)
++{
++ struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
++
++ mutex_lock(&drv_data->shmem_lock.mutex);
++}
++
++static void rt2800usb_shmem_unlock(struct rt2x00_dev *rt2x00dev)
++{
++ struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
++
++ mutex_unlock(&drv_data->shmem_lock.mutex);
++}
++
+ /*
+ * Queue handlers.
+ */
+@@ -260,8 +281,10 @@ static int rt2800usb_write_firmware(stru
+ rt2x00usb_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
+ data + offset, length);
+
++ rt2800_shared_mem_lock(rt2x00dev);
+ rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
+ rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
++ rt2800_shared_mem_unlock(rt2x00dev);
+
+ /*
+ * Send firmware request to device to load firmware,
+@@ -276,7 +299,10 @@ static int rt2800usb_write_firmware(stru
+ }
+
+ msleep(10);
++
++ rt2800_shared_mem_lock(rt2x00dev);
+ rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
++ rt2800_shared_mem_unlock(rt2x00dev);
+
+ return 0;
+ }
+@@ -294,8 +320,10 @@ static int rt2800usb_init_registers(stru
+ if (rt2800_wait_csr_ready(rt2x00dev))
+ return -EBUSY;
+
++ rt2800_shared_mem_lock(rt2x00dev);
+ rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, ®);
+ rt2x00usb_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000);
++ rt2800_shared_mem_unlock(rt2x00dev);
+
+ reg = 0;
+ rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1);
+@@ -810,6 +838,9 @@ static const struct rt2800_ops rt2800usb
+ .drv_write_firmware = rt2800usb_write_firmware,
+ .drv_init_registers = rt2800usb_init_registers,
+ .drv_get_txwi = rt2800usb_get_txwi,
++ .shmem_init_lock = rt2800usb_shmem_init_lock,
++ .shmem_lock = rt2800usb_shmem_lock,
++ .shmem_unlock = rt2800usb_shmem_unlock,
+ };
+
+ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
--- /dev/null
+From dcfe3dd46242050f100162dce2bcad24d2c942c6 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sat, 17 Aug 2013 19:31:42 +0200
+Subject: [PATCH] rt2x00: rt2800lib: fix beacon generation on RT3593
+
+On the RT3593 chipset, the beacon registers are located
+in the high 8KB part of the shared memory.
+
+The high part of the shared memory is only accessible
+if it is explicitly selected. Add a helper function
+in order to be able to control the SHR_MSEL bit in
+the PBF_SYS_CTRL register. Also add a few more helper
+functions and use those to select the correct part of
+the shared memory before and after accessing the beacon
+registers.
+
+The base addresses of the beacon registers are also
+different from the actually used values, so fix the
+'rt2800_hw_beacon_base' function to return the correct
+values.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+Changes since v1: ---
+---
+ drivers/net/wireless/rt2x00/rt2800.h | 3 +++
+ drivers/net/wireless/rt2x00/rt2800lib.c | 44 +++++++++++++++++++++++++++++++
+ 2 files changed, 47 insertions(+)
+
+--- a/drivers/net/wireless/rt2x00/rt2800.h
++++ b/drivers/net/wireless/rt2x00/rt2800.h
+@@ -572,6 +572,7 @@
+ #define PBF_SYS_CTRL 0x0400
+ #define PBF_SYS_CTRL_READY FIELD32(0x00000080)
+ #define PBF_SYS_CTRL_HOST_RAM_WRITE FIELD32(0x00010000)
++#define PBF_SYS_CTRL_SHR_MSEL FIELD32(0x00080000)
+
+ /*
+ * HOST-MCU shared memory
+@@ -2024,6 +2025,8 @@ struct mac_iveiv_entry {
+ (((__index) < 6) ? (HW_BEACON_BASE4 + ((__index - 4) * 0x0200)) : \
+ (HW_BEACON_BASE6 - ((__index - 6) * 0x0200))))
+
++#define HW_BEACON_BASE_HIGH(__index) (0x4000 + (__index) * 512)
++
+ #define BEACON_BASE_TO_OFFSET(_base) (((_base) - 0x4000) / 64)
+
+ /*
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -82,6 +82,39 @@ static inline bool rt2800_is_305x_soc(st
+ return false;
+ }
+
++static inline void rt2800_shared_mem_select(struct rt2x00_dev *rt2x00dev,
++ bool high)
++{
++ u32 reg;
++
++ if (WARN_ON_ONCE(!rt2800_has_high_shared_mem(rt2x00dev)))
++ return;
++
++ rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, ®);
++ rt2x00_set_field32(®, PBF_SYS_CTRL_SHR_MSEL, high);
++ rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, reg);
++}
++
++static inline bool rt2800_beacon_uses_high_mem(struct rt2x00_dev *rt2x00dev)
++{
++ if (rt2x00_rt(rt2x00dev, RT3593))
++ return true;
++
++ return false;
++}
++
++static inline void rt2800_select_beacon_mem(struct rt2x00_dev *rt2x00dev)
++{
++ if (rt2800_beacon_uses_high_mem(rt2x00dev))
++ rt2800_shared_mem_select(rt2x00dev, true);
++}
++
++static inline void rt2800_deselect_beacon_mem(struct rt2x00_dev *rt2x00dev)
++{
++ if (rt2800_beacon_uses_high_mem(rt2x00dev))
++ rt2800_shared_mem_select(rt2x00dev, false);
++}
++
+ static void rt2800_bbp_write(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, const u8 value)
+ {
+@@ -948,6 +981,9 @@ EXPORT_SYMBOL_GPL(rt2800_txdone_entry);
+ static unsigned int rt2800_hw_beacon_base(struct rt2x00_dev *rt2x00dev,
+ unsigned int index)
+ {
++ if (rt2x00_rt(rt2x00dev, RT3593))
++ return HW_BEACON_BASE_HIGH(index);
++
+ return HW_BEACON_BASE(index);
+ }
+
+@@ -1012,8 +1048,12 @@ void rt2800_write_beacon(struct queue_en
+ beacon_base = rt2800_hw_beacon_base(rt2x00dev, entry->entry_idx);
+
+ rt2800_shared_mem_lock(rt2x00dev);
++
++ rt2800_select_beacon_mem(rt2x00dev);
+ rt2800_register_multiwrite(rt2x00dev, beacon_base, entry->skb->data,
+ entry->skb->len + padding_len);
++ rt2800_deselect_beacon_mem(rt2x00dev);
++
+ rt2800_shared_mem_unlock(rt2x00dev);
+
+ /*
+@@ -1041,6 +1081,8 @@ static inline void rt2800_clear_beacon_r
+
+ rt2800_shared_mem_lock(rt2x00dev);
+
++ rt2800_select_beacon_mem(rt2x00dev);
++
+ /*
+ * For the Beacon base registers we only need to clear
+ * the whole TXWI which (when set to 0) will invalidate
+@@ -1049,6 +1091,8 @@ static inline void rt2800_clear_beacon_r
+ for (i = 0; i < txwi_desc_size; i += sizeof(__le32))
+ rt2800_register_write(rt2x00dev, beacon_base + i, 0);
+
++ rt2800_deselect_beacon_mem(rt2x00dev);
++
+ rt2800_shared_mem_unlock(rt2x00dev);
+ }
+
--- /dev/null
+From a058825fa7b53fab3b003d8928b60e5b686b3421 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 4 Aug 2013 14:36:11 +0200
+Subject: [PATCH] rt2x00: rt2800lib: add hw_beacon_count field to struct
+ rt2800_drv_data
+
+Some chipsets can handle more than 8 beacons at once.
+Add a new field to the rt2800_drv_data structure which
+will hold the number of supported beacons of the given
+chipset.
+
+Update the rt2x00_init_registers function to get the
+beacon count from the new field instead of using a
+hardcoded value.
+
+In order to keep the current behaviour, initialize the
+new field with the actually used value.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/wireless/rt2x00/rt2800lib.c | 5 ++++-
+ drivers/net/wireless/rt2x00/rt2800lib.h | 1 +
+ 2 files changed, 5 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -4584,6 +4584,7 @@ EXPORT_SYMBOL_GPL(rt2800_link_tuner);
+ */
+ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
+ {
++ struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
+ u32 reg;
+ u16 eeprom;
+ unsigned int i;
+@@ -4971,7 +4972,7 @@ static int rt2800_init_registers(struct
+ /*
+ * Clear all beacons
+ */
+- for (i = 0; i < 8; i++)
++ for (i = 0; i < drv_data->hw_beacon_count; i++)
+ rt2800_clear_beacon_register(rt2x00dev, i);
+
+ if (rt2x00_is_usb(rt2x00dev)) {
+@@ -7817,6 +7818,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r
+ if (rt2x00_rt(rt2x00dev, RT3593))
+ __set_bit(RT2800_HAS_HIGH_SHARED_MEM, &drv_data->rt2800_flags);
+
++ drv_data->hw_beacon_count = 8;
++
+ /*
+ * Allocate eeprom data.
+ */
+--- a/drivers/net/wireless/rt2x00/rt2800lib.h
++++ b/drivers/net/wireless/rt2x00/rt2800lib.h
+@@ -33,6 +33,7 @@ struct rt2800_drv_data {
+ u8 txmixer_gain_24g;
+ u8 txmixer_gain_5g;
+ unsigned int tbtt_tick;
++ unsigned int hw_beacon_count;
+
+ unsigned long rt2800_flags;
+
--- /dev/null
+From 1bfa43ca8f30be53ce4fa79cfc3e219642a812b6 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 2 Sep 2013 10:58:32 +0200
+Subject: [PATCH] rt2x00: rt2800lib: init additional beacon offset registers
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/wireless/rt2x00/rt2800.h | 14 ++++++++++++++
+ drivers/net/wireless/rt2x00/rt2800lib.c | 24 ++++++++++++++++++++++++
+ 2 files changed, 38 insertions(+)
+
+--- a/drivers/net/wireless/rt2x00/rt2800.h
++++ b/drivers/net/wireless/rt2x00/rt2800.h
+@@ -627,6 +627,20 @@
+ */
+ #define PBF_DBG 0x043c
+
++/* BCN_OFFSET2 */
++#define BCN_OFFSET2 0x0444
++#define BCN_OFFSET2_BCN8 FIELD32(0x000000ff)
++#define BCN_OFFSET2_BCN9 FIELD32(0x0000ff00)
++#define BCN_OFFSET2_BCN10 FIELD32(0x00ff0000)
++#define BCN_OFFSET2_BCN11 FIELD32(0xff000000)
++
++/* BCN_OFFSET3 */
++#define BCN_OFFSET3 0x0448
++#define BCN_OFFSET3_BCN12 FIELD32(0x000000ff)
++#define BCN_OFFSET3_BCN13 FIELD32(0x0000ff00)
++#define BCN_OFFSET3_BCN14 FIELD32(0x00ff0000)
++#define BCN_OFFSET3_BCN15 FIELD32(0xff000000)
++
+ /*
+ * RF registers
+ */
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -4618,6 +4618,30 @@ static int rt2800_init_registers(struct
+ rt2800_get_beacon_offset(rt2x00dev, 7));
+ rt2800_register_write(rt2x00dev, BCN_OFFSET1, reg);
+
++ if (drv_data->hw_beacon_count == 16) {
++ rt2800_register_read(rt2x00dev, BCN_OFFSET2, ®);
++ rt2x00_set_field32(®, BCN_OFFSET2_BCN8,
++ rt2800_get_beacon_offset(rt2x00dev, 8));
++ rt2x00_set_field32(®, BCN_OFFSET2_BCN9,
++ rt2800_get_beacon_offset(rt2x00dev, 9));
++ rt2x00_set_field32(®, BCN_OFFSET2_BCN10,
++ rt2800_get_beacon_offset(rt2x00dev, 10));
++ rt2x00_set_field32(®, BCN_OFFSET2_BCN11,
++ rt2800_get_beacon_offset(rt2x00dev, 11));
++ rt2800_register_write(rt2x00dev, BCN_OFFSET2, reg);
++
++ rt2800_register_read(rt2x00dev, BCN_OFFSET3, ®);
++ rt2x00_set_field32(®, BCN_OFFSET3_BCN12,
++ rt2800_get_beacon_offset(rt2x00dev, 12));
++ rt2x00_set_field32(®, BCN_OFFSET3_BCN13,
++ rt2800_get_beacon_offset(rt2x00dev, 13));
++ rt2x00_set_field32(®, BCN_OFFSET3_BCN14,
++ rt2800_get_beacon_offset(rt2x00dev, 14));
++ rt2x00_set_field32(®, BCN_OFFSET3_BCN15,
++ rt2800_get_beacon_offset(rt2x00dev, 15));
++ rt2800_register_write(rt2x00dev, BCN_OFFSET3, reg);
++ }
++
+ rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f);
+ rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
+
--- /dev/null
+From 9bea8b61f6025cd633bd5ac71be258620b49bcb3 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 2 Sep 2013 11:00:06 +0200
+Subject: [PATCH] rt2x00: rt2800lib: fix max supported beacon count for RT3593
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/wireless/rt2x00/rt2800lib.c | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -7842,7 +7842,10 @@ int rt2800_probe_hw(struct rt2x00_dev *r
+ if (rt2x00_rt(rt2x00dev, RT3593))
+ __set_bit(RT2800_HAS_HIGH_SHARED_MEM, &drv_data->rt2800_flags);
+
+- drv_data->hw_beacon_count = 8;
++ if (rt2x00_rt(rt2x00dev, RT3593))
++ drv_data->hw_beacon_count = 16;
++ else
++ drv_data->hw_beacon_count = 8;
+
+ /*
+ * Allocate eeprom data.
--- /dev/null
+From 91094ed065f7794886b4a5490fd6de942f036bb4 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 24 Mar 2013 19:26:26 +0100
+Subject: [PATCH] rt2x00: allow to build rt2800soc module for RT3883
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/wireless/rt2x00/Kconfig | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/rt2x00/Kconfig
++++ b/drivers/net/wireless/rt2x00/Kconfig
+@@ -210,7 +210,7 @@ endif
+ config RT2800SOC
+ tristate "Ralink WiSoC support"
+ depends on m
+- depends on SOC_RT288X || SOC_RT305X
++ depends on SOC_RT288X || SOC_RT305X || SOC_RT3883
+ select RT2X00_LIB_SOC
+ select RT2X00_LIB_MMIO
+ select RT2X00_LIB_CRYPTO
+@@ -245,7 +245,7 @@ config RT2X00_LIB_PCI
+
+ config RT2X00_LIB_SOC
+ tristate "RT2x00 SoC support"
+- depends on SOC_RT288X || SOC_RT305X
++ depends on SOC_RT288X || SOC_RT305X || SOC_RT3883
+ depends on m
+ select RT2X00_LIB
+
--- /dev/null
+From 4f16582c93a71eba9d389e0f0a8aa9099a9587cd Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 24 Mar 2013 19:26:26 +0100
+Subject: [PATCH] rt2x00: rt2800lib: enable support for RT3883
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/wireless/rt2x00/rt2800lib.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -7812,6 +7812,7 @@ static int rt2800_probe_rt(struct rt2x00
+ case RT3390:
+ case RT3572:
+ case RT3593:
++ case RT3883:
+ case RT5390:
+ case RT5392:
+ case RT5592:
--- /dev/null
+From ecb394ccf248d8652c463133c4f404458a57a9c1 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 24 Mar 2013 19:26:26 +0100
+Subject: [PATCH] rt2x00: rt2800lib: add rf_vals for RF3853
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/wireless/rt2x00/rt2800.h | 4 +-
+ drivers/net/wireless/rt2x00/rt2800lib.c | 65 +++++++++++++++++++++++++++++++
+ 2 files changed, 68 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800.h
++++ b/drivers/net/wireless/rt2x00/rt2800.h
+@@ -48,7 +48,8 @@
+ * RF2853 2.4G/5G 3T3R
+ * RF3320 2.4G 1T1R(RT3350/RT3370/RT3390)
+ * RF3322 2.4G 2T2R(RT3352/RT3371/RT3372/RT3391/RT3392)
+- * RF3053 2.4G/5G 3T3R(RT3883/RT3563/RT3573/RT3593/RT3662)
++ * RF3053 2.4G/5G 3T3R(RT3563/RT3573/RT3593)
++ * RF3853 2.4G/5G 3T3R(RT3883/RT3662)
+ * RF5592 2.4G/5G 2T2R
+ * RF3070 2.4G 1T1R
+ * RF5360 2.4G 1T1R
+@@ -71,6 +72,7 @@
+ #define RF5592 0x000f
+ #define RF3070 0x3070
+ #define RF3290 0x3290
++#define RF3853 0x3853
+ #define RF5360 0x5360
+ #define RF5370 0x5370
+ #define RF5372 0x5372
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -7432,6 +7432,66 @@ static const struct rf_channel rf_vals_3
+ {173, 0x61, 0, 9},
+ };
+
++static const struct rf_channel rf_vals_3853[] = {
++ {1, 241, 6, 2},
++ {2, 241, 6, 7},
++ {3, 242, 6, 2},
++ {4, 242, 6, 7},
++ {5, 243, 6, 2},
++ {6, 243, 6, 7},
++ {7, 244, 6, 2},
++ {8, 244, 6, 7},
++ {9, 245, 6, 2},
++ {10, 245, 6, 7},
++ {11, 246, 6, 2},
++ {12, 246, 6, 7},
++ {13, 247, 6, 2},
++ {14, 248, 6, 4},
++
++ {36, 0x56, 8, 4},
++ {38, 0x56, 8, 6},
++ {40, 0x56, 8, 8},
++ {44, 0x57, 8, 0},
++ {46, 0x57, 8, 2},
++ {48, 0x57, 8, 4},
++ {52, 0x57, 8, 8},
++ {54, 0x57, 8, 10},
++ {56, 0x58, 8, 0},
++ {60, 0x58, 8, 4},
++ {62, 0x58, 8, 6},
++ {64, 0x58, 8, 8},
++
++ {100, 0x5b, 8, 8},
++ {102, 0x5b, 8, 10},
++ {104, 0x5c, 8, 0},
++ {108, 0x5c, 8, 4},
++ {110, 0x5c, 8, 6},
++ {112, 0x5c, 8, 8},
++ {114, 0x5c, 8, 10},
++ {116, 0x5d, 8, 0},
++ {118, 0x5d, 8, 2},
++ {120, 0x5d, 8, 4},
++ {124, 0x5d, 8, 8},
++ {126, 0x5d, 8, 10},
++ {128, 0x5e, 8, 0},
++ {132, 0x5e, 8, 4},
++ {134, 0x5e, 8, 6},
++ {136, 0x5e, 8, 8},
++ {140, 0x5f, 8, 0},
++
++ {149, 0x5f, 8, 9},
++ {151, 0x5f, 8, 11},
++ {153, 0x60, 8, 1},
++ {157, 0x60, 8, 5},
++ {159, 0x60, 8, 7},
++ {161, 0x60, 8, 9},
++ {165, 0x61, 8, 1},
++ {167, 0x61, 8, 3},
++ {169, 0x61, 8, 5},
++ {171, 0x61, 8, 7},
++ {173, 0x61, 8, 9},
++};
++
+ static const struct rf_channel rf_vals_5592_xtal20[] = {
+ /* Channel, N, K, mod, R */
+ {1, 482, 4, 10, 3},
+@@ -7660,6 +7720,11 @@ static int rt2800_probe_hw_mode(struct r
+ spec->channels = rf_vals_3x;
+ break;
+
++ case RF3853:
++ spec->num_channels = ARRAY_SIZE(rf_vals_3853);
++ spec->channels = rf_vals_3853;
++ break;
++
+ case RF5592:
+ rt2800_register_read(rt2x00dev, MAC_DEBUG_INDEX, ®);
+ if (rt2x00_get_field32(reg, MAC_DEBUG_INDEX_XTAL)) {
--- /dev/null
+From f8e3fcf18e1f2d7f9e6a9680c5452da090f33d88 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Thu, 1 Aug 2013 14:40:44 +0200
+Subject: [PATCH] rt2x00: rt2800lib: enable VCO calibration for RF3853
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/wireless/rt2x00/rt2800lib.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -4349,6 +4349,7 @@ void rt2800_vco_calibration(struct rt2x0
+ case RF3053:
+ case RF3070:
+ case RF3290:
++ case RF3853:
+ case RF5360:
+ case RF5370:
+ case RF5372:
+@@ -7839,6 +7840,7 @@ static int rt2800_probe_hw_mode(struct r
+ case RF3053:
+ case RF3070:
+ case RF3290:
++ case RF3853:
+ case RF5360:
+ case RF5370:
+ case RF5372:
--- /dev/null
+From 6e3a17190815c6aa4dc53c2cfe9125fb1154f187 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 24 Mar 2013 19:26:27 +0100
+Subject: [PATCH] rt2x00: rt2800lib: add channel configuration function for
+ RF3853
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/wireless/rt2x00/rt2800lib.c | 208 +++++++++++++++++++++++++++++++
+ 1 file changed, 208 insertions(+)
+
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -2605,6 +2605,211 @@ static void rt2800_config_channel_rf3053
+ }
+ }
+
++static void rt2800_config_channel_rf3853(struct rt2x00_dev *rt2x00dev,
++ struct ieee80211_conf *conf,
++ struct rf_channel *rf,
++ struct channel_info *info)
++{
++ u8 rfcsr;
++ u8 bbp;
++ u8 pwr1, pwr2, pwr3;
++
++ const bool txbf_enabled = false; /* TODO */
++
++ /* TODO: add band selection */
++
++ if (rf->channel <= 14)
++ rt2800_rfcsr_write(rt2x00dev, 6, 0x40);
++ else if (rf->channel < 132)
++ rt2800_rfcsr_write(rt2x00dev, 6, 0x80);
++ else
++ rt2800_rfcsr_write(rt2x00dev, 6, 0x40);
++
++ rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1);
++ rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3);
++
++ if (rf->channel <= 14)
++ rt2800_rfcsr_write(rt2x00dev, 11, 0x46);
++ else
++ rt2800_rfcsr_write(rt2x00dev, 11, 0x48);
++
++ if (rf->channel <= 14)
++ rt2800_rfcsr_write(rt2x00dev, 12, 0x1a);
++ else
++ rt2800_rfcsr_write(rt2x00dev, 12, 0x52);
++
++ rt2800_rfcsr_write(rt2x00dev, 13, 0x12);
++
++ rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0);
++ rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0);
++ rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0);
++ rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0);
++ rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0);
++ rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0);
++ rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
++ rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1);
++
++ switch (rt2x00dev->default_ant.tx_chain_num) {
++ case 3:
++ rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
++ /* fallthrough */
++ case 2:
++ rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
++ /* fallthrough */
++ case 1:
++ rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1);
++ break;
++ }
++
++ switch (rt2x00dev->default_ant.rx_chain_num) {
++ case 3:
++ rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
++ /* fallthrough */
++ case 2:
++ rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
++ /* fallthrough */
++ case 1:
++ rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
++ break;
++ }
++ rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
++
++ rt2800_adjust_freq_offset(rt2x00dev);
++
++ rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
++ if (!conf_is_ht40(conf))
++ rfcsr &= ~(0x06);
++ else
++ rfcsr |= 0x06;
++ rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
++
++ if (rf->channel <= 14)
++ rt2800_rfcsr_write(rt2x00dev, 31, 0xa0);
++ else
++ rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
++
++ if (conf_is_ht40(conf))
++ rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
++ else
++ rt2800_rfcsr_write(rt2x00dev, 32, 0xd8);
++
++ if (rf->channel <= 14)
++ rt2800_rfcsr_write(rt2x00dev, 34, 0x3c);
++ else
++ rt2800_rfcsr_write(rt2x00dev, 34, 0x20);
++
++ /* loopback RF_BS */
++ rt2800_rfcsr_read(rt2x00dev, 36, &rfcsr);
++ if (rf->channel <= 14)
++ rt2x00_set_field8(&rfcsr, RFCSR36_RF_BS, 1);
++ else
++ rt2x00_set_field8(&rfcsr, RFCSR36_RF_BS, 0);
++ rt2800_rfcsr_write(rt2x00dev, 36, rfcsr);
++
++ if (rf->channel <= 14)
++ rfcsr = 0x23;
++ else if (rf->channel < 100)
++ rfcsr = 0x36;
++ else if (rf->channel < 132)
++ rfcsr = 0x32;
++ else
++ rfcsr = 0x30;
++
++ if (txbf_enabled)
++ rfcsr |= 0x40;
++
++ rt2800_rfcsr_write(rt2x00dev, 39, rfcsr);
++
++ if (rf->channel <= 14)
++ rt2800_rfcsr_write(rt2x00dev, 44, 0x93);
++ else
++ rt2800_rfcsr_write(rt2x00dev, 44, 0x9b);
++
++ if (rf->channel <= 14)
++ rfcsr = 0xbb;
++ else if (rf->channel < 100)
++ rfcsr = 0xeb;
++ else if (rf->channel < 132)
++ rfcsr = 0xb3;
++ else
++ rfcsr = 0x9b;
++ rt2800_rfcsr_write(rt2x00dev, 45, rfcsr);
++
++ if (rf->channel <= 14)
++ rfcsr = 0x8e;
++ else
++ rfcsr = 0x8a;
++
++ if (txbf_enabled)
++ rfcsr |= 0x20;
++
++ rt2800_rfcsr_write(rt2x00dev, 49, rfcsr);
++
++ rt2800_rfcsr_write(rt2x00dev, 50, 0x86);
++
++ rt2800_rfcsr_read(rt2x00dev, 51, &rfcsr);
++ if (rf->channel <= 14)
++ rt2800_rfcsr_write(rt2x00dev, 51, 0x75);
++ else
++ rt2800_rfcsr_write(rt2x00dev, 51, 0x51);
++
++ rt2800_rfcsr_read(rt2x00dev, 52, &rfcsr);
++ if (rf->channel <= 14)
++ rt2800_rfcsr_write(rt2x00dev, 52, 0x45);
++ else
++ rt2800_rfcsr_write(rt2x00dev, 52, 0x05);
++
++ if (rf->channel <= 14) {
++ pwr1 = info->default_power1 & 0x1f;
++ pwr2 = info->default_power2 & 0x1f;
++ pwr3 = info->default_power3 & 0x1f;
++ } else {
++ pwr1 = 0x48 | ((info->default_power1 & 0x18) << 1) |
++ (info->default_power1 & 0x7);
++ pwr2 = 0x48 | ((info->default_power2 & 0x18) << 1) |
++ (info->default_power2 & 0x7);
++ pwr3 = 0x48 | ((info->default_power3 & 0x18) << 1) |
++ (info->default_power3 & 0x7);
++ }
++
++ rt2800_rfcsr_write(rt2x00dev, 53, pwr1);
++ rt2800_rfcsr_write(rt2x00dev, 54, pwr2);
++ rt2800_rfcsr_write(rt2x00dev, 55, pwr3);
++
++ rt2x00_dbg(rt2x00dev, "Channel:%d, pwr1:%02x, pwr2:%02x, pwr3:%02x\n",
++ rf->channel, pwr1, pwr2, pwr3);
++
++ bbp = (info->default_power1 >> 5) |
++ ((info->default_power2 & 0xe0) >> 1);
++ rt2800_bbp_write(rt2x00dev, 109, bbp);
++
++ rt2800_bbp_read(rt2x00dev, 110, &bbp);
++ bbp &= 0x0f;
++ bbp |= (info->default_power3 & 0xe0) >> 1;
++ rt2800_bbp_write(rt2x00dev, 110, bbp);
++
++ rt2800_rfcsr_read(rt2x00dev, 57, &rfcsr);
++ if (rf->channel <= 14)
++ rt2800_rfcsr_write(rt2x00dev, 57, 0x6e);
++ else
++ rt2800_rfcsr_write(rt2x00dev, 57, 0x3e);
++
++ /* Enable RF tuning */
++ rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1);
++ rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
++
++ udelay(2000);
++
++ rt2800_bbp_read(rt2x00dev, 49, &bbp);
++ /* clear update flag */
++ rt2800_bbp_write(rt2x00dev, 49, bbp & 0xfe);
++ rt2800_bbp_write(rt2x00dev, 49, bbp);
++
++ /* TODO: add calibration for TxBF */
++}
++
+ #define POWER_BOUND 0x27
+ #define POWER_BOUND_5G 0x2b
+
+@@ -3217,6 +3422,9 @@ static void rt2800_config_channel(struct
+ case RF3322:
+ rt2800_config_channel_rf3322(rt2x00dev, conf, rf, info);
+ break;
++ case RF3853:
++ rt2800_config_channel_rf3853(rt2x00dev, conf, rf, info);
++ break;
+ case RF3070:
+ case RF5360:
+ case RF5370:
--- /dev/null
+From afd38ae82226551bf879b6c7c4b620c271fee9d2 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Thu, 1 Aug 2013 14:42:05 +0200
+Subject: [PATCH] rt2x00: rt2800lib: enable RF3853 support
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/wireless/rt2x00/rt2800lib.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -7398,6 +7398,7 @@ static int rt2800_init_eeprom(struct rt2
+ case RF3290:
+ case RF3320:
+ case RF3322:
++ case RF3853:
+ case RF5360:
+ case RF5370:
+ case RF5372:
--- /dev/null
+From 0094872a5e8e4664c6ea1b2dfa487063d39ae363 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 24 Mar 2013 19:26:26 +0100
+Subject: [PATCH] rt2x00: rt2800lib: add MAC register initialization for
+ RT3883
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/wireless/rt2x00/rt2800.h | 14 ++++++++++++++
+ drivers/net/wireless/rt2x00/rt2800lib.c | 19 ++++++++++++++++---
+ 2 files changed, 30 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800.h
++++ b/drivers/net/wireless/rt2x00/rt2800.h
+@@ -1586,6 +1586,20 @@
+ #define TX_PWR_CFG_9_STBC7_CH2 FIELD32(0x00000f00)
+
+ /*
++ * TX_TXBF_CFG:
++ */
++#define TX_TXBF_CFG_0 0x138c
++#define TX_TXBF_CFG_1 0x13a4
++#define TX_TXBF_CFG_2 0x13a8
++#define TX_TXBF_CFG_3 0x13ac
++
++/*
++ * TX_FBK_CFG_3S:
++ */
++#define TX_FBK_CFG_3S_0 0x13c4
++#define TX_FBK_CFG_3S_1 0x13c8
++
++/*
+ * RX_FILTER_CFG: RX configuration register.
+ */
+ #define RX_FILTER_CFG 0x1400
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -4973,6 +4973,12 @@ static int rt2800_init_registers(struct
+ rt2800_register_write(rt2x00dev, TX_SW_CFG2,
+ 0x00000000);
+ }
++ } else if (rt2x00_rt(rt2x00dev, RT3883)) {
++ rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000402);
++ rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
++ rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00040000);
++ rt2800_register_write(rt2x00dev, TX_TXBF_CFG_0, 0x8000fc21);
++ rt2800_register_write(rt2x00dev, TX_TXBF_CFG_3, 0x00009c40);
+ } else if (rt2x00_rt(rt2x00dev, RT5390) ||
+ rt2x00_rt(rt2x00dev, RT5392) ||
+ rt2x00_rt(rt2x00dev, RT5592)) {
+@@ -5003,9 +5009,11 @@ static int rt2800_init_registers(struct
+
+ rt2800_register_read(rt2x00dev, MAX_LEN_CFG, ®);
+ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
+- if (rt2x00_rt_rev_gte(rt2x00dev, RT2872, REV_RT2872E) ||
+- rt2x00_rt(rt2x00dev, RT2883) ||
+- rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070E))
++ if (rt2x00_rt(rt2x00dev, RT3883))
++ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 3);
++ else if (rt2x00_rt_rev_gte(rt2x00dev, RT2872, REV_RT2872E) ||
++ rt2x00_rt(rt2x00dev, RT2883) ||
++ rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070E))
+ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 2);
+ else
+ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1);
+@@ -5158,6 +5166,11 @@ static int rt2800_init_registers(struct
+ reg = rt2x00_rt(rt2x00dev, RT5592) ? 0x00000082 : 0x00000002;
+ rt2800_register_write(rt2x00dev, TXOP_HLDR_ET, reg);
+
++ if (rt2x00_rt(rt2x00dev, RT3883)) {
++ rt2800_register_write(rt2x00dev, TX_FBK_CFG_3S_0, 0x12111008);
++ rt2800_register_write(rt2x00dev, TX_FBK_CFG_3S_1, 0x16151413);
++ }
++
+ rt2800_register_read(rt2x00dev, TX_RTS_CFG, ®);
+ rt2x00_set_field32(®, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 32);
+ rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES,
--- /dev/null
+From 6c2d32478159fffff0b85abb6817a21bb2338231 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 24 Mar 2013 19:26:27 +0100
+Subject: [PATCH] rt2x00: rt2800soc: fix rt2800soc_disable_radio for RT3883
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/wireless/rt2x00/rt2800soc.c | 9 ++++++++-
+ 1 file changed, 8 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800soc.c
++++ b/drivers/net/wireless/rt2x00/rt2800soc.c
+@@ -51,9 +51,16 @@ static bool rt2800soc_hwcrypt_disabled(s
+
+ static void rt2800soc_disable_radio(struct rt2x00_dev *rt2x00dev)
+ {
++ u32 reg;
++
+ rt2800_disable_radio(rt2x00dev);
+ rt2x00mmio_register_write(rt2x00dev, PWR_PIN_CFG, 0);
+- rt2x00mmio_register_write(rt2x00dev, TX_PIN_CFG, 0);
++
++ reg = 0;
++ if (rt2x00_rt(rt2x00dev, RT3883))
++ rt2x00_set_field32(®, TX_PIN_CFG_RFTR_EN, 1);
++
++ rt2x00mmio_register_write(rt2x00dev, TX_PIN_CFG, reg);
+ }
+
+ static int rt2800soc_set_device_state(struct rt2x00_dev *rt2x00dev,
--- /dev/null
+From 84833056aa7dd25f5b097e31c78f2a0914c5160c Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 24 Mar 2013 19:26:26 +0100
+Subject: [PATCH] rt2x00: rt2800lib: add BBP register initialization for
+ RT3883
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/wireless/rt2x00/rt2800lib.c | 44 +++++++++++++++++++++++++++++++
+ 1 file changed, 44 insertions(+)
+
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -5776,6 +5776,47 @@ static void rt2800_init_bbp_3593(struct
+ rt2800_bbp_write(rt2x00dev, 103, 0xc0);
+ }
+
++static void rt2800_init_bbp_3883(struct rt2x00_dev *rt2x00dev)
++{
++ rt2800_init_bbp_early(rt2x00dev);
++
++ rt2800_bbp_write(rt2x00dev, 4, 0x50);
++ rt2800_bbp_write(rt2x00dev, 47, 0x48);
++
++ rt2800_bbp_write(rt2x00dev, 86, 0x46);
++ rt2800_bbp_write(rt2x00dev, 88, 0x90);
++
++ rt2800_bbp_write(rt2x00dev, 92, 0x02);
++
++ rt2800_bbp_write(rt2x00dev, 103, 0xc0);
++ rt2800_bbp_write(rt2x00dev, 104, 0x92);
++ rt2800_bbp_write(rt2x00dev, 105, 0x34);
++ rt2800_bbp_write(rt2x00dev, 106, 0x12);
++ rt2800_bbp_write(rt2x00dev, 120, 0x50);
++ rt2800_bbp_write(rt2x00dev, 137, 0x0f);
++ rt2800_bbp_write(rt2x00dev, 163, 0x9d);
++
++ /* Set ITxBF timeout to 0x9C40=1000msec */
++ rt2800_bbp_write(rt2x00dev, 179, 0x02);
++ rt2800_bbp_write(rt2x00dev, 180, 0x00);
++ rt2800_bbp_write(rt2x00dev, 182, 0x40);
++ rt2800_bbp_write(rt2x00dev, 180, 0x01);
++ rt2800_bbp_write(rt2x00dev, 182, 0x9c);
++
++ rt2800_bbp_write(rt2x00dev, 179, 0x00);
++
++ /* Reprogram the inband interface to put right values in RXWI */
++ rt2800_bbp_write(rt2x00dev, 142, 0x04);
++ rt2800_bbp_write(rt2x00dev, 143, 0x3b);
++ rt2800_bbp_write(rt2x00dev, 142, 0x06);
++ rt2800_bbp_write(rt2x00dev, 143, 0xa0);
++ rt2800_bbp_write(rt2x00dev, 142, 0x07);
++ rt2800_bbp_write(rt2x00dev, 143, 0xa1);
++ rt2800_bbp_write(rt2x00dev, 142, 0x08);
++ rt2800_bbp_write(rt2x00dev, 143, 0xa2);
++ rt2800_bbp_write(rt2x00dev, 148, 0xc8);
++}
++
+ static void rt2800_init_bbp_53xx(struct rt2x00_dev *rt2x00dev)
+ {
+ int ant, div_mode;
+@@ -5994,6 +6035,9 @@ static void rt2800_init_bbp(struct rt2x0
+ case RT3593:
+ rt2800_init_bbp_3593(rt2x00dev);
+ return;
++ case RT3883:
++ rt2800_init_bbp_3883(rt2x00dev);
++ return;
+ case RT5390:
+ case RT5392:
+ rt2800_init_bbp_53xx(rt2x00dev);
--- /dev/null
+From 99c659cf345640fd0f733cbcaf4583cc2c868ec0 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 29 Apr 2013 13:21:48 +0200
+Subject: [PATCH] rt2x00: rt2800lib: add RFCSR initialization for RT3883
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/wireless/rt2x00/rt2800.h | 1 +
+ drivers/net/wireless/rt2x00/rt2800lib.c | 141 +++++++++++++++++++++++++++++++
+ 2 files changed, 142 insertions(+)
+
+--- a/drivers/net/wireless/rt2x00/rt2800.h
++++ b/drivers/net/wireless/rt2x00/rt2800.h
+@@ -2169,6 +2169,7 @@ struct mac_iveiv_entry {
+ /*
+ * RFCSR 2:
+ */
++#define RFCSR2_RESCAL_BP FIELD8(0x40)
+ #define RFCSR2_RESCAL_EN FIELD8(0x80)
+
+ /*
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -6811,6 +6811,144 @@ static void rt2800_init_rfcsr_3593(struc
+ /* TODO: enable stream mode support */
+ }
+
++static void rt2800_init_rfcsr_3883(struct rt2x00_dev *rt2x00dev)
++{
++ u8 rfcsr;
++
++ /* TODO: get the actual ECO value from the SoC */
++ const unsigned int eco = 5;
++
++ rt2800_rf_init_calibration(rt2x00dev, 2);
++
++ rt2800_rfcsr_write(rt2x00dev, 0, 0xe0);
++ rt2800_rfcsr_write(rt2x00dev, 1, 0x03);
++ rt2800_rfcsr_write(rt2x00dev, 2, 0x50);
++ rt2800_rfcsr_write(rt2x00dev, 3, 0x20);
++ rt2800_rfcsr_write(rt2x00dev, 4, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 5, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 6, 0x40);
++ rt2800_rfcsr_write(rt2x00dev, 7, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 8, 0x5b);
++ rt2800_rfcsr_write(rt2x00dev, 9, 0x08);
++ rt2800_rfcsr_write(rt2x00dev, 10, 0xd3);
++ rt2800_rfcsr_write(rt2x00dev, 11, 0x48);
++ rt2800_rfcsr_write(rt2x00dev, 12, 0x1a);
++ rt2800_rfcsr_write(rt2x00dev, 13, 0x12);
++ rt2800_rfcsr_write(rt2x00dev, 14, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 15, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 16, 0x00);
++
++ /* RFCSR 17 will be initialized later based on the
++ * frequency offset stored in the EEPROM
++ */
++
++ rt2800_rfcsr_write(rt2x00dev, 18, 0x40);
++ rt2800_rfcsr_write(rt2x00dev, 19, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 20, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 21, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 22, 0x20);
++ rt2800_rfcsr_write(rt2x00dev, 23, 0xc0);
++ rt2800_rfcsr_write(rt2x00dev, 24, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 25, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 26, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 27, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 28, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 29, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
++ rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
++ rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
++ rt2800_rfcsr_write(rt2x00dev, 33, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 34, 0x20);
++ rt2800_rfcsr_write(rt2x00dev, 35, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 36, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 37, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 38, 0x86);
++ rt2800_rfcsr_write(rt2x00dev, 39, 0x23);
++ rt2800_rfcsr_write(rt2x00dev, 40, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 41, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 42, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 43, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 44, 0x93);
++ rt2800_rfcsr_write(rt2x00dev, 45, 0xbb);
++ rt2800_rfcsr_write(rt2x00dev, 46, 0x60);
++ rt2800_rfcsr_write(rt2x00dev, 47, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 48, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 49, 0x8e);
++ rt2800_rfcsr_write(rt2x00dev, 50, 0x86);
++ rt2800_rfcsr_write(rt2x00dev, 51, 0x51);
++ rt2800_rfcsr_write(rt2x00dev, 52, 0x05);
++ rt2800_rfcsr_write(rt2x00dev, 53, 0x76);
++ rt2800_rfcsr_write(rt2x00dev, 54, 0x76);
++ rt2800_rfcsr_write(rt2x00dev, 55, 0x76);
++ rt2800_rfcsr_write(rt2x00dev, 56, 0xdb);
++ rt2800_rfcsr_write(rt2x00dev, 57, 0x3e);
++ rt2800_rfcsr_write(rt2x00dev, 58, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 59, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 60, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 61, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 62, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 63, 0x00);
++
++ /* TODO: rx filter calibration? */
++
++ rt2800_bbp_write(rt2x00dev, 137, 0x0f);
++
++ rt2800_bbp_write(rt2x00dev, 163, 0x9d);
++
++ rt2800_bbp_write(rt2x00dev, 105, 0x05);
++
++ rt2800_bbp_write(rt2x00dev, 179, 0x02);
++ rt2800_bbp_write(rt2x00dev, 180, 0x00);
++ rt2800_bbp_write(rt2x00dev, 182, 0x40);
++ rt2800_bbp_write(rt2x00dev, 180, 0x01);
++ rt2800_bbp_write(rt2x00dev, 182, 0x9c);
++
++ rt2800_bbp_write(rt2x00dev, 179, 0x00);
++
++ rt2800_bbp_write(rt2x00dev, 142, 0x04);
++ rt2800_bbp_write(rt2x00dev, 143, 0x3b);
++ rt2800_bbp_write(rt2x00dev, 142, 0x06);
++ rt2800_bbp_write(rt2x00dev, 143, 0xa0);
++ rt2800_bbp_write(rt2x00dev, 142, 0x07);
++ rt2800_bbp_write(rt2x00dev, 143, 0xa1);
++ rt2800_bbp_write(rt2x00dev, 142, 0x08);
++ rt2800_bbp_write(rt2x00dev, 143, 0xa2);
++ rt2800_bbp_write(rt2x00dev, 148, 0xc8);
++
++ if (eco == 5) {
++ rt2800_rfcsr_write(rt2x00dev, 32, 0xd8);
++ rt2800_rfcsr_write(rt2x00dev, 33, 0x32);
++ }
++
++ rt2800_rfcsr_read(rt2x00dev, 2, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_BP, 0);
++ rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 1);
++ rt2800_rfcsr_write(rt2x00dev, 2, rfcsr);
++ msleep(1);
++ rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 0);
++ rt2800_rfcsr_write(rt2x00dev, 2, rfcsr);
++
++ rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
++ rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
++
++ rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr);
++ rfcsr |= 0xc0;
++ rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
++
++ rt2800_rfcsr_read(rt2x00dev, 22, &rfcsr);
++ rfcsr |= 0x20;
++ rt2800_rfcsr_write(rt2x00dev, 22, rfcsr);
++
++ rt2800_rfcsr_read(rt2x00dev, 46, &rfcsr);
++ rfcsr |= 0x20;
++ rt2800_rfcsr_write(rt2x00dev, 46, rfcsr);
++
++ rt2800_rfcsr_read(rt2x00dev, 20, &rfcsr);
++ rfcsr &= ~0xee;
++ rt2800_rfcsr_write(rt2x00dev, 20, rfcsr);
++}
++
+ static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev)
+ {
+ rt2800_rf_init_calibration(rt2x00dev, 2);
+@@ -7042,6 +7180,9 @@ static void rt2800_init_rfcsr(struct rt2
+ case RT3390:
+ rt2800_init_rfcsr_3390(rt2x00dev);
+ break;
++ case RT3883:
++ rt2800_init_rfcsr_3883(rt2x00dev);
++ break;
+ case RT3572:
+ rt2800_init_rfcsr_3572(rt2x00dev);
+ break;
--- /dev/null
+From 86022438ffeb1b87dfcd018bf477fdbb43076691 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Wed, 8 May 2013 19:35:33 +0200
+Subject: [PATCH] rt2x00: rt2800lib: use the extended EEPROM map for RT3883
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/wireless/rt2x00/rt2800lib.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -342,7 +342,8 @@ static unsigned int rt2800_eeprom_word_i
+ wiphy_name(rt2x00dev->hw->wiphy), word))
+ return 0;
+
+- if (rt2x00_rt(rt2x00dev, RT3593))
++ if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883))
+ map = rt2800_eeprom_map_ext;
+ else
+ map = rt2800_eeprom_map;
--- /dev/null
+From 4cf5403f02fa65dc2207f61d223cffa9ae50e907 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Thu, 1 Aug 2013 14:48:21 +0200
+Subject: [PATCH] rt2x00: rt2800lib: force rf type to RF3853 on RT3883
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/wireless/rt2x00/rt2800lib.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -7579,6 +7579,8 @@ static int rt2800_init_eeprom(struct rt2
+ rt2x00_rt(rt2x00dev, RT5390) ||
+ rt2x00_rt(rt2x00dev, RT5392))
+ rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID, &rf);
++ else if (rt2x00_rt(rt2x00dev, RT3883))
++ rf = RF3853;
+ else
+ rf = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RF_TYPE);
+
--- /dev/null
+From 269f19c848a2380db03a3f207cafb88e28d71c53 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 24 Mar 2013 19:26:28 +0100
+Subject: [PATCH] rt2x00: rt2800lib: add channel configuration code for RT3883
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/wireless/rt2x00/rt2800lib.c | 72 +++++++++++++++++++++++++++++--
+ 1 file changed, 69 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -3385,6 +3385,36 @@ static char rt2800_txpower_to_dev(struct
+ return clamp_t(char, txpower, MIN_A_TXPOWER, MAX_A_TXPOWER);
+ }
+
++static void rt3883_bbp_adjust(struct rt2x00_dev *rt2x00dev,
++ struct rf_channel *rf)
++{
++ u8 bbp;
++
++ bbp = (rf->channel > 14) ? 0x48 : 0x38;
++ rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, bbp);
++
++ rt2800_bbp_write(rt2x00dev, 69, 0x12);
++
++ if (rf->channel <= 14) {
++ rt2800_bbp_write(rt2x00dev, 70, 0x0a);
++ } else {
++ /* Disable CCK packet detection */
++ rt2800_bbp_write(rt2x00dev, 70, 0x00);
++ }
++
++ rt2800_bbp_write(rt2x00dev, 73, 0x10);
++
++ if (rf->channel > 14) {
++ rt2800_bbp_write(rt2x00dev, 62, 0x1d);
++ rt2800_bbp_write(rt2x00dev, 63, 0x1d);
++ rt2800_bbp_write(rt2x00dev, 64, 0x1d);
++ } else {
++ rt2800_bbp_write(rt2x00dev, 62, 0x2d);
++ rt2800_bbp_write(rt2x00dev, 63, 0x2d);
++ rt2800_bbp_write(rt2x00dev, 64, 0x2d);
++ }
++}
++
+ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
+ struct ieee80211_conf *conf,
+ struct rf_channel *rf,
+@@ -3403,6 +3433,12 @@ static void rt2800_config_channel(struct
+ rt2800_txpower_to_dev(rt2x00dev, rf->channel,
+ info->default_power3);
+
++ switch (rt2x00dev->chip.rt) {
++ case RT3883:
++ rt3883_bbp_adjust(rt2x00dev, rf);
++ break;
++ }
++
+ switch (rt2x00dev->chip.rf) {
+ case RF2020:
+ case RF3020:
+@@ -3484,6 +3520,15 @@ static void rt2800_config_channel(struct
+ rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
+ rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
+ rt2800_bbp_write(rt2x00dev, 77, 0x98);
++ } else if (rt2x00_rt(rt2x00dev, RT3883)) {
++ rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
++ rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
++ rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
++
++ if (rt2x00dev->default_ant.rx_chain_num > 1)
++ rt2800_bbp_write(rt2x00dev, 86, 0x46);
++ else
++ rt2800_bbp_write(rt2x00dev, 86, 0);
+ } else {
+ rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
+ rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
+@@ -3496,6 +3541,7 @@ static void rt2800_config_channel(struct
+ !rt2x00_rt(rt2x00dev, RT5392)) {
+ if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) {
+ rt2800_bbp_write(rt2x00dev, 82, 0x62);
++ rt2800_bbp_write(rt2x00dev, 82, 0x62);
+ rt2800_bbp_write(rt2x00dev, 75, 0x46);
+ } else {
+ if (rt2x00_rt(rt2x00dev, RT3593))
+@@ -3504,19 +3550,22 @@ static void rt2800_config_channel(struct
+ rt2800_bbp_write(rt2x00dev, 82, 0x84);
+ rt2800_bbp_write(rt2x00dev, 75, 0x50);
+ }
+- if (rt2x00_rt(rt2x00dev, RT3593))
++ if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883))
+ rt2800_bbp_write(rt2x00dev, 83, 0x8a);
+ }
+
+ } else {
+ if (rt2x00_rt(rt2x00dev, RT3572))
+ rt2800_bbp_write(rt2x00dev, 82, 0x94);
+- else if (rt2x00_rt(rt2x00dev, RT3593))
++ else if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883))
+ rt2800_bbp_write(rt2x00dev, 82, 0x82);
+ else
+ rt2800_bbp_write(rt2x00dev, 82, 0xf2);
+
+- if (rt2x00_rt(rt2x00dev, RT3593))
++ if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883))
+ rt2800_bbp_write(rt2x00dev, 83, 0x9a);
+
+ if (rt2x00_has_cap_external_lna_a(rt2x00dev))
+@@ -3638,6 +3687,23 @@ static void rt2800_config_channel(struct
+
+ rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
+
++ usleep_range(1000, 1500);
++ }
++
++ if (rt2x00_rt(rt2x00dev, RT3883)) {
++ if (!conf_is_ht40(conf))
++ rt2800_bbp_write(rt2x00dev, 105, 0x34);
++ else
++ rt2800_bbp_write(rt2x00dev, 105, 0x04);
++
++ /* AGC init */
++ if (rf->channel <= 14)
++ reg = 0x2e + rt2x00dev->lna_gain;
++ else
++ reg = 0x20 + ((rt2x00dev->lna_gain * 5) / 3);
++
++ rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
++
+ usleep_range(1000, 1500);
+ }
+
--- /dev/null
+From e37d93abaabe3ab72b0332a18092acc162307274 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 30 Sep 2013 13:57:26 +0200
+Subject: [PATCH] rt2x00: rt2800lib: fix txpower_to_dev function for RT3883
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/wireless/rt2x00/rt2800lib.c | 6 ++++--
+ 1 file changed, 4 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -3372,13 +3372,15 @@ static char rt2800_txpower_to_dev(struct
+ unsigned int channel,
+ char txpower)
+ {
+- if (rt2x00_rt(rt2x00dev, RT3593))
++ if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883))
+ txpower = rt2x00_get_field8(txpower, EEPROM_TXPOWER_ALC);
+
+ if (channel <= 14)
+ return clamp_t(char, txpower, MIN_G_TXPOWER, MAX_G_TXPOWER);
+
+- if (rt2x00_rt(rt2x00dev, RT3593))
++ if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883))
+ return clamp_t(char, txpower, MIN_A_TXPOWER_3593,
+ MAX_A_TXPOWER_3593);
+ else
--- /dev/null
+From c4d79e344bd580d85821390d49f92dced7d8e125 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 24 Mar 2013 19:26:29 +0100
+Subject: [PATCH] rt2x00: rt2800lib: use correct txpower calculation function
+ for RT3883
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/wireless/rt2x00/rt2800lib.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -4582,7 +4582,8 @@ static void rt2800_config_txpower(struct
+ struct ieee80211_channel *chan,
+ int power_level)
+ {
+- if (rt2x00_rt(rt2x00dev, RT3593))
++ if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883))
+ rt2800_config_txpower_rt3593(rt2x00dev, chan, power_level);
+ else
+ rt2800_config_txpower_rt28xx(rt2x00dev, chan, power_level);
--- /dev/null
+From caea0671cd8fd9ade4f5969cbe0ee545e94ae105 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sat, 24 Aug 2013 11:49:55 +0200
+Subject: [PATCH] rt2x00: rt2800lib: hardcode txmixer gain values to zero for
+ RT3883
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/wireless/rt2x00/rt2800lib.c | 6 ++++--
+ 1 file changed, 4 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -7461,7 +7461,8 @@ static u8 rt2800_get_txmixer_gain_24g(st
+ {
+ u16 word;
+
+- if (rt2x00_rt(rt2x00dev, RT3593))
++ if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883))
+ return 0;
+
+ rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG, &word);
+@@ -7475,7 +7476,8 @@ static u8 rt2800_get_txmixer_gain_5g(str
+ {
+ u16 word;
+
+- if (rt2x00_rt(rt2x00dev, RT3593))
++ if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883))
+ return 0;
+
+ rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_A, &word);
--- /dev/null
+From 11c40fb47c4a4dd6ad060c2ae127ced89ffb9fe1 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Thu, 18 Apr 2013 14:33:33 +0200
+Subject: [PATCH] rt2x00: rt2800lib: use correct [RT]XWI size for RT3883
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/wireless/rt2x00/rt2800lib.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -558,6 +558,7 @@ void rt2800_get_txwi_rxwi_size(struct rt
+ {
+ switch (rt2x00dev->chip.rt) {
+ case RT3593:
++ case RT3883:
+ *txwi_size = TXWI_DESC_SIZE_4WORDS;
+ *rxwi_size = RXWI_DESC_SIZE_5WORDS;
+ break;
--- /dev/null
+From b403bdfa00665ce6b53583bdb837ffad0b91c09f Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 24 Mar 2013 19:26:29 +0100
+Subject: [PATCH] rt2x00: rt2800lib: use correct beacon base for RT3883
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/wireless/rt2x00/rt2800lib.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -983,7 +983,8 @@ EXPORT_SYMBOL_GPL(rt2800_txdone_entry);
+ static unsigned int rt2800_hw_beacon_base(struct rt2x00_dev *rt2x00dev,
+ unsigned int index)
+ {
+- if (rt2x00_rt(rt2x00dev, RT3593))
++ if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883))
+ return HW_BEACON_BASE_HIGH(index);
+
+ return HW_BEACON_BASE(index);
--- /dev/null
+From 74b7eaf75fc6eb86292056ef705e543f9cd6086b Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 18 Aug 2013 09:57:58 +0200
+Subject: [PATCH] rt2x00: rt2800lib: use correct beacon count for RT3883
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/wireless/rt2x00/rt2800lib.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -8393,7 +8393,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r
+ if (rt2x00_rt(rt2x00dev, RT3593))
+ __set_bit(RT2800_HAS_HIGH_SHARED_MEM, &drv_data->rt2800_flags);
+
+- if (rt2x00_rt(rt2x00dev, RT3593))
++ if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883))
+ drv_data->hw_beacon_count = 16;
+ else
+ drv_data->hw_beacon_count = 8;
--- /dev/null
+From fa5ad9c025610c22048add2f0ad03f62b6ca1e74 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 30 Sep 2013 16:53:33 +0200
+Subject: [PATCH] rt2x00: rt2800lib: fix antenna configuration for RT3883
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/wireless/rt2x00/rt2800lib.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -1917,7 +1917,8 @@ void rt2800_config_ant(struct rt2x00_dev
+ rt2800_bbp_write(rt2x00dev, 3, r3);
+ rt2800_bbp_write(rt2x00dev, 1, r1);
+
+- if (rt2x00_rt(rt2x00dev, RT3593)) {
++ if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883)) {
+ if (ant->rx_chain_num == 1)
+ rt2800_bbp_write(rt2x00dev, 86, 0x00);
+ else
--- /dev/null
+From 6d668fef3a1baa60bdd715ee062ddb6333d2647c Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 30 Sep 2013 16:58:23 +0200
+Subject: [PATCH] rt2x00: rt2800lib: fix LNA gain configuration for RT3883
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/wireless/rt2x00/rt2800lib.c | 6 ++++--
+ 1 file changed, 4 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -1940,7 +1940,8 @@ static void rt2800_config_lna_gain(struc
+ rt2800_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
+ lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
+ } else if (libconf->rf.channel <= 128) {
+- if (rt2x00_rt(rt2x00dev, RT3593)) {
++ if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883)) {
+ rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2, &eeprom);
+ lna_gain = rt2x00_get_field16(eeprom,
+ EEPROM_EXT_LNA2_A1);
+@@ -1950,7 +1951,8 @@ static void rt2800_config_lna_gain(struc
+ EEPROM_RSSI_BG2_LNA_A1);
+ }
+ } else {
+- if (rt2x00_rt(rt2x00dev, RT3593)) {
++ if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883)) {
+ rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2, &eeprom);
+ lna_gain = rt2x00_get_field16(eeprom,
+ EEPROM_EXT_LNA2_A2);
--- /dev/null
+From c49b2d829aa1c816a46a577cdec6d2ff14d9f06e Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Tue, 1 Oct 2013 15:40:08 +0200
+Subject: [PATCH] rt2x00: rt2800lib: fix VGC setup for RT3883
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/wireless/rt2x00/rt2800lib.c | 11 +++++++++--
+ 1 file changed, 9 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -4781,7 +4781,8 @@ static u8 rt2800_get_default_vgc(struct
+ else
+ vgc = 0x2e + rt2x00dev->lna_gain;
+ } else { /* 5GHZ band */
+- if (rt2x00_rt(rt2x00dev, RT3593))
++ if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883))
+ vgc = 0x20 + (rt2x00dev->lna_gain * 5) / 3;
+ else if (rt2x00_rt(rt2x00dev, RT5592))
+ vgc = 0x24 + (2 * rt2x00dev->lna_gain);
+@@ -4801,7 +4802,8 @@ static inline void rt2800_set_vgc(struct
+ {
+ if (qual->vgc_level != vgc_level) {
+ if (rt2x00_rt(rt2x00dev, RT3572) ||
+- rt2x00_rt(rt2x00dev, RT3593)) {
++ rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883)) {
+ rt2800_bbp_write_with_rx_chain(rt2x00dev, 66,
+ vgc_level);
+ } else if (rt2x00_rt(rt2x00dev, RT5592)) {
+@@ -4848,6 +4850,11 @@ void rt2800_link_tuner(struct rt2x00_dev
+ }
+ break;
+
++ case RT3883:
++ if (qual->rssi > -65)
++ vgc += 0x10;
++ break;
++
+ case RT5592:
+ if (qual->rssi > -65)
+ vgc += 0x20;
--- /dev/null
+From 1616650aea676541d4dc8adc6f4219856d193c8b Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Tue, 1 Oct 2013 17:27:57 +0200
+Subject: [PATCH] rt2x00: rt2800lib: fix EEPROM LNA validation for RT3883
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/wireless/rt2x00/rt2800lib.c | 9 ++++++---
+ 1 file changed, 6 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -7598,7 +7598,8 @@ static int rt2800_validate_eeprom(struct
+ rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word);
+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10)
+ rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0);
+- if (!rt2x00_rt(rt2x00dev, RT3593)) {
++ if (!rt2x00_rt(rt2x00dev, RT3593) &&
++ !rt2x00_rt(rt2x00dev, RT3883)) {
+ if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 ||
+ rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff)
+ rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1,
+@@ -7618,7 +7619,8 @@ static int rt2800_validate_eeprom(struct
+ rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word);
+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10)
+ rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0);
+- if (!rt2x00_rt(rt2x00dev, RT3593)) {
++ if (!rt2x00_rt(rt2x00dev, RT3593) &&
++ !rt2x00_rt(rt2x00dev, RT3883)) {
+ if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 ||
+ rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff)
+ rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2,
+@@ -7626,7 +7628,8 @@ static int rt2800_validate_eeprom(struct
+ }
+ rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word);
+
+- if (rt2x00_rt(rt2x00dev, RT3593)) {
++ if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883)) {
+ rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2, &word);
+ if (rt2x00_get_field16(word, EEPROM_EXT_LNA2_A1) == 0x00 ||
+ rt2x00_get_field16(word, EEPROM_EXT_LNA2_A1) == 0xff)
--- /dev/null
+From e3871034a0e7c8a95152dc3eafbcc4535398cbdc Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Wed, 2 Oct 2013 10:11:59 +0200
+Subject: [PATCH] rt2x00: rt2800lib: fix txpower compensation for RT3883
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/wireless/rt2x00/rt2800lib.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -3959,6 +3959,9 @@ static u8 rt2800_compensate_txpower(stru
+ if (rt2x00_rt(rt2x00dev, RT3593))
+ return min_t(u8, txpower, 0xc);
+
++ if (rt2x00_rt(rt2x00dev, RT3883))
++ return min_t(u8, txpower, 0xf);
++
+ if (rt2x00_has_cap_power_limit(rt2x00dev)) {
+ /*
+ * Check if eirp txpower exceed txpower_limit.
--- /dev/null
+From f6734ec72da936989a8ce4186b3ede28fbc47836 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 18 Aug 2013 21:57:34 +0200
+Subject: [PATCH] rt2x00: rt2800lib: enable RT2800_HAS_HIGH_SHARED_MEM for
+ RT3883
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/wireless/rt2x00/rt2800lib.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -8406,7 +8406,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r
+ if (retval)
+ return retval;
+
+- if (rt2x00_rt(rt2x00dev, RT3593))
++ if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883))
+ __set_bit(RT2800_HAS_HIGH_SHARED_MEM, &drv_data->rt2800_flags);
+
+ if (rt2x00_rt(rt2x00dev, RT3593) ||
--- /dev/null
+From f1acfc2f397e86548ae1b479c198d4bef57050f6 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 29 Sep 2013 18:10:34 +0200
+Subject: [PATCH] rt2x00: rt2800lib: use high memory for beacons on RT3883
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/wireless/rt2x00/rt2800lib.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -97,7 +97,8 @@ static inline void rt2800_shared_mem_sel
+
+ static inline bool rt2800_beacon_uses_high_mem(struct rt2x00_dev *rt2x00dev)
+ {
+- if (rt2x00_rt(rt2x00dev, RT3593))
++ if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883))
+ return true;
+
+ return false;
--- /dev/null
+From 5e67d4f8a46d19748b501c2ef86de3f50d3cfd51 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 24 Mar 2013 19:26:27 +0100
+Subject: [PATCH] rt2x00: rt2800mmio: add a workaround for spurious
+ TX_FIFO_STATUS interrupts
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/wireless/rt2x00/rt2800mmio.c | 72 +++++++++++++++++++++++++-----
+ drivers/net/wireless/rt2x00/rt2x00.h | 5 +++
+ 2 files changed, 65 insertions(+), 12 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800mmio.c
++++ b/drivers/net/wireless/rt2x00/rt2800mmio.c
+@@ -415,9 +415,9 @@ void rt2800mmio_autowake_tasklet(unsigne
+ }
+ EXPORT_SYMBOL_GPL(rt2800mmio_autowake_tasklet);
+
+-static void rt2800mmio_txstatus_interrupt(struct rt2x00_dev *rt2x00dev)
++static void rt2800mmio_txstatus_interrupt(struct rt2x00_dev *rt2x00dev,
++ u32 status)
+ {
+- u32 status;
+ int i;
+
+ /*
+@@ -438,29 +438,77 @@ static void rt2800mmio_txstatus_interrup
+ * Since we have only one producer and one consumer we don't
+ * need to lock the kfifo.
+ */
+- for (i = 0; i < rt2x00dev->tx->limit; i++) {
+- rt2x00mmio_register_read(rt2x00dev, TX_STA_FIFO, &status);
+-
+- if (!rt2x00_get_field32(status, TX_STA_FIFO_VALID))
+- break;
+-
++ i = 0;
++ do {
+ if (!kfifo_put(&rt2x00dev->txstatus_fifo, status)) {
+- rt2x00_warn(rt2x00dev, "TX status FIFO overrun, drop tx status report\n");
++ rt2x00_warn(rt2x00dev,
++ "TX status FIFO overrun, drop TX status report\n");
+ break;
+ }
+- }
++
++ if (++i >= rt2x00dev->tx->limit)
++ break;
++
++ rt2x00mmio_register_read(rt2x00dev, TX_STA_FIFO, &status);
++ } while (rt2x00_get_field32(status, TX_STA_FIFO_VALID));
+
+ /* Schedule the tasklet for processing the tx status. */
+ tasklet_schedule(&rt2x00dev->txstatus_tasklet);
+ }
+
++#define RT2800MMIO_TXSTATUS_IRQ_MAX_RETRIES 4
++
++static bool rt2800mmio_txstatus_is_spurious(struct rt2x00_dev *rt2x00dev,
++ u32 txstatus)
++{
++ if (likely(rt2x00_get_field32(txstatus, TX_STA_FIFO_VALID))) {
++ rt2x00dev->txstatus_irq_retries = 0;
++ return false;
++ }
++
++ rt2x00dev->txstatus_irq_retries++;
++
++ /* Ensure that we don't go into an infinite IRQ loop. */
++ if (rt2x00dev->txstatus_irq_retries >=
++ RT2800MMIO_TXSTATUS_IRQ_MAX_RETRIES) {
++ rt2x00_warn(rt2x00dev,
++ "%u spurious TX_FIFO_STATUS interrupt(s)\n",
++ rt2x00dev->txstatus_irq_retries);
++ rt2x00dev->txstatus_irq_retries = 0;
++ return false;
++ }
++
++ return true;
++}
++
+ irqreturn_t rt2800mmio_interrupt(int irq, void *dev_instance)
+ {
+ struct rt2x00_dev *rt2x00dev = dev_instance;
+ u32 reg, mask;
++ u32 txstatus = 0;
+
+- /* Read status and ACK all interrupts */
++ /* Read status */
+ rt2x00mmio_register_read(rt2x00dev, INT_SOURCE_CSR, ®);
++
++ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS)) {
++ /* Due to unknown reason the hardware generates a
++ * TX_FIFO_STATUS interrupt before the TX_STA_FIFO
++ * register contain valid data. Read the TX status
++ * here to see if we have to process the actual
++ * request.
++ */
++ rt2x00mmio_register_read(rt2x00dev, TX_STA_FIFO, &txstatus);
++ if (rt2800mmio_txstatus_is_spurious(rt2x00dev, txstatus)) {
++ /* Remove the TX_FIFO_STATUS bit so it won't be
++ * processed in this turn. The hardware will
++ * generate another IRQ for us.
++ */
++ rt2x00_set_field32(®,
++ INT_SOURCE_CSR_TX_FIFO_STATUS, 0);
++ }
++ }
++
++ /* ACK interrupts */
+ rt2x00mmio_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
+
+ if (!reg)
+@@ -477,7 +525,7 @@ irqreturn_t rt2800mmio_interrupt(int irq
+ mask = ~reg;
+
+ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS)) {
+- rt2800mmio_txstatus_interrupt(rt2x00dev);
++ rt2800mmio_txstatus_interrupt(rt2x00dev, txstatus);
+ /*
+ * Never disable the TX_FIFO_STATUS interrupt.
+ */
+--- a/drivers/net/wireless/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/rt2x00/rt2x00.h
+@@ -986,6 +986,11 @@ struct rt2x00_dev {
+ int rf_channel;
+
+ /*
++ * Counter for tx status irq retries (rt2800pci).
++ */
++ unsigned int txstatus_irq_retries;
++
++ /*
+ * Protect the interrupt mask register.
+ */
+ spinlock_t irqmask_lock;
projects / openwrt / staging / chunkeey.git / commitdiff