Add support for SAMA5D2 ICP board.
Hardware:
- SoC: SAMA5D27
- RAM: 512 MB DDR3L
- MMC: One stanard SD card interface
- USB: One USB host switch 4 ports with power switch,
One USB device type Micro-AB
- CAN: 2 interfaces
- Ethernet: One Gigabit Ethernet PHY through HSIC,
One ETH switchport,
One EtherCAT interface
- WiFi/BT: Footprint for IEEE 802.11 b/g/n Wi-Fi plus
Bluetooth module (Wi-Fi/BT), suitable for
Microchip WILC3000-MR110CA or WILC3000-MR110UA
- Debug port: One J-Link-OB/J-Link-CDC, one JTAG interface
- Leds: one RGB LED
- Buttons: reset, wakeup, 2 user buttons
- Expansion: one PIOBU/PIO connector, 3 mikrobus sockets
- Power mangament: PMIC (MCP16502), one power consumption device
(PAC1934)
Not working in Linux:
- EtherCAT interface: there is no Linux support integrated
- PAC1934: driver available at [1] but not integrated in Linux
Flashing:
- follow the procedure at [2]
[1] https://ww1.microchip.com/downloads/en/DeviceDoc/pac193x_linux_driver.zip
[2] https://www.linux4sam.org/bin/view/Linux4SAM/Sama5d2IcpMainPage#Create_a_SD_card_with_the_demo
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
BUILD_DEVICES:=atmel_at91sam9x25ek atmel_at91sam9x35ek
endef
+define AT91Bootstrap/sama5d2_icpdf_qspi_uboot
+ TITLE:=AT91Bootstrap for SAMA5D2 ICP board (QSPI Flash)
+ BUILD_SUBTARGET:=sama5
+ BUILD_DEVICES:=microchip_sama5d2-icp
+endef
+
+define AT91Bootstrap/sama5d2_icpsd_uboot
+ TITLE:=AT91Bootstrap for SAMA5D2 ICP board (SDcard)
+ BUILD_SUBTARGET:=sama5
+ BUILD_DEVICES:=microchip_sama5d2-icp
+endef
+
define AT91Bootstrap/sama5d2_xplaineddf_uboot
TITLE:=AT91Bootstrap for SAMA5D2 Xplained board (SPI Flash)
BUILD_SUBTARGET:=sama5
AT91BOOTSTRAP_TARGETS := \
at91sam9x5eknf_uboot \
at91sam9x5eksd_uboot \
+ sama5d2_icpdf_qspi_uboot \
+ sama5d2_icpsd_uboot \
sama5d2_xplaineddf_uboot \
sama5d2_xplaineddf_qspi_uboot \
sama5d2_xplainedsd_uboot \
BUILD_DEVICES:=microchip_sama5d3-xplained
endef
+define U-Boot/sama5d2_icp_mmc
+ NAME:=SAMA5D2 ICP board (SDCard)
+ BUILD_SUBTARGET:=sama5
+ BUILD_DEVICES:=microchip_sama5d2-icp
+endef
+
define U-Boot/sama5d2_xplained_spiflash
NAME:=SAMA5D2 Xplained board (SPI Flash)
BUILD_SUBTARGET:=sama5
at91sam9x5ek_mmc \
sama5d3_xplained_nandflash \
sama5d3_xplained_mmc \
+ sama5d2_icp_mmc \
sama5d2_xplained_mmc \
sama5d2_xplained_spiflash \
sama5d4_xplained_mmc \
rm -f $@.img $@.boot $@-uboot.env $@-uboot-env.txt)
endef
+define Device/microchip_sama5d2-icp
+ $(Device/evaluation-dtb)
+ DEVICE_VENDOR := Microchip
+ DEVICE_MODEL := SAMA5D2 ICP
+ DEVICE_DTS := at91-sama5d2_icp
+ SUPPORTED_DEVICES := microchip,sama5d2-icp
+ KERNEL_SIZE := 6144k
+ $(Device/evaluation-sdimage)
+endef
+TARGET_DEVICES += microchip_sama5d2-icp
+
define Device/microchip_sama5d2-xplained
$(Device/evaluation-dtb)
DEVICE_VENDOR := Microchip