mediatek: mt7622: unifi6lr: properly register Ethernet PHY

This change enables proper Ethernet link status and speed reporting on
the Ubiquiti UniFi 6 LR access point:

 mtk_soc_eth 1b100000.ethernet eth0: PHY [mdio-bus:08] driver [Aquantia AQR112C] (irq=POLL)
 mtk_soc_eth 1b100000.ethernet eth0: configuring for phy/2500base-x link mode
 mtk_soc_eth 1b100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

diff --git a/target/linux/mediatek/dts/mt7622-ubnt-unifi-6-lr.dtsi b/target/linux/mediatek/dts/mt7622-ubnt-unifi-6-lr.dtsi
index 31d274a5d68de2b5563944f8c8aa4de871000ae1..ae587a11a0a7f03a365f3ae1a624e02416fd3b48 100644 (file)
--- a/target/linux/mediatek/dts/mt7622-ubnt-unifi-6-lr.dtsi
+++ b/target/linux/mediatek/dts/mt7622-ubnt-unifi-6-lr.dtsi
@@ -161,21 +161,17 @@
                reg = <0>;
 
                phy-mode = "2500base-x";
-
-               fixed-link {
-                       speed = <2500>;
-                       full-duplex;
-               };
+               phy-handle = <&phy0>;
+               phy-connection-type = "2500base-x";
        };
 
        mdio: mdio-bus {
                #address-cells = <1>;
                #size-cells = <0>;
 
-               ethernet-phy@7 {
-                       /* Marvell AQRate AQR112W - no driver */
+               phy0: ethernet-phy@8 {
                        compatible = "ethernet-phy-ieee802.3-c45";
-                       reg = <0x7>;
+                       reg = <0x8>;
                };
        };
 };