char *buffer[NR_CHANNELS];
unsigned int nb_bytes[NR_CHANNELS];
unsigned int count_wr[NR_CHANNELS];
- struct ipoctal_config chan_config[NR_CHANNELS];
wait_queue_head_t queue[NR_CHANNELS];
unsigned short error_flag[NR_CHANNELS];
spinlock_t lock[NR_CHANNELS];
if (cflag & CRTSCTS) {
mr1 |= MR1_RxRTS_CONTROL_ON;
mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_ON;
- ipoctal->chan_config[channel].flow_control = 1;
} else {
mr1 |= MR1_RxRTS_CONTROL_OFF;
mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_OFF;
- ipoctal->chan_config[channel].flow_control = 0;
}
break;
case IP_OCTAL_422_ID:
mr1 |= MR1_RxRTS_CONTROL_OFF;
mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_OFF;
- ipoctal->chan_config[channel].flow_control = 0;
break;
case IP_OCTAL_485_ID:
mr1 |= MR1_RxRTS_CONTROL_OFF;
mr2 |= MR2_TxRTS_CONTROL_ON | MR2_CTS_ENABLE_TX_OFF;
- ipoctal->chan_config[channel].flow_control = 0;
break;
default:
return;
ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.mr, mr2);
ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.csr, csr);
- /* save the setup in the structure */
- ipoctal->chan_config[channel].baud = tty_get_baud_rate(tty);
- ipoctal->chan_config[channel].bits_per_char = cflag & CSIZE;
- ipoctal->chan_config[channel].parity = cflag & PARENB;
- ipoctal->chan_config[channel].stop_bits = cflag & CSTOPB;
-
/* Enable again the RX */
ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
CR_ENABLE_RX);
UART_BREAK = 1 << 4, /* Received break */
};
-/**
- * struct ipoctal_config - Serial configuration
- *
- * @baud: Baud rate
- * @stop_bits: Stop bits (1 or 2)
- * @bits_per_char: data size in bits
- * @parity
- * @flow_control: Flow control management (RTS/CTS) (0 disabled, 1 enabled)
- */
-struct ipoctal_config {
- unsigned int baud;
- unsigned int stop_bits;
- unsigned int bits_per_char;
- unsigned short parity;
- unsigned int flow_control;
-};
-
/**
* struct ipoctal_stats -- Stats since last reset
*