powerpc: Add support for userspace P9 copy paste

The copy paste facility introduced in POWER9 provides an optimised
mechanism for a userspace application to copy a cacheline. This is
provided by a pair of instructions, copy and paste, while a third,
cp_abort (copy paste abort), provides a clean up of the state in case of
a failure.

The copy instruction will read a 128 byte cacheline and store it in an
internal buffer. The subsequent paste instruction will store this
internal buffer to memory and set a CR field if the paste succeeds.

Since the state of the copy paste buffer is internal (and not
architecturally visible), in the unlikely event of a context switch, the
state cannot be stored and the paste should therefore fail.

The cp_abort instruction exists to fail and clean up any such
interrupted copy paste sequence and is to be called by the kernel as
part of the context switch. Doing so prevents data from a preceding copy
in one process leaking into the paste of another.

This code enables use of the cp_abort instruction if a supported
processor is detected.

NOTE: this is for userspace only, not in kernel, and does not deal
with KVM guests.

Patch created with much assistance from Michael Neuling
<mikey@neuling.org>

Signed-off-by: Chris Smart <chris@distroguy.com>
Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index 7ab04fc59e2462917501a7f6a1b8727be3685163..1d035c1cc8898baaf00cd1eb9c5a284bf6e159d0 100644 (file)
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -131,6 +131,7 @@
 /* sorted alphabetically */
 #define PPC_INST_BHRBE                 0x7c00025c
 #define PPC_INST_CLRBHRB               0x7c00035c
+#define PPC_INST_CP_ABORT              0x7c00068c
 #define PPC_INST_DCBA                  0x7c0005ec
 #define PPC_INST_DCBA_MASK             0xfc0007fe
 #define PPC_INST_DCBAL                 0x7c2005ec
@@ -285,6 +286,7 @@
 #endif
 
 /* Deal with instructions that older assemblers aren't aware of */
+#define        PPC_CP_ABORT            stringify_in_c(.long PPC_INST_CP_ABORT)
 #define        PPC_DCBAL(a, b)         stringify_in_c(.long PPC_INST_DCBAL | \
                                        __PPC_RA(a) | __PPC_RB(b))
 #define        PPC_DCBZL(a, b)         stringify_in_c(.long PPC_INST_DCBZL | \

diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 39a79c89a4b6e8edab082c8e35cda58ef2b00ddf..4fd492209d904575f65101ec15f0fe23f11e0d97 100644 (file)
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -37,6 +37,7 @@
 #include <asm/hw_irq.h>
 #include <asm/context_tracking.h>
 #include <asm/tm.h>
+#include <asm/ppc-opcode.h>
 
 /*
  * System calls.
@@ -509,6 +510,14 @@ BEGIN_FTR_SECTION
        ldarx   r6,0,r1
 END_FTR_SECTION_IFSET(CPU_FTR_STCX_CHECKS_ADDRESS)
 
+BEGIN_FTR_SECTION
+/*
+ * A cp_abort (copy paste abort) here ensures that when context switching, a
+ * copy from one process can't leak into the paste of another.
+ */
+       PPC_CP_ABORT
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
+
 #ifdef CONFIG_PPC_BOOK3S
 /* Cancel all explict user streams as they will have no use after context
  * switch and will stop the HW from creating streams itself