ramips: fix MT7621 switch driver IRQ storm on init with linux 4.14

The hardware emits some interrupts while initializing and handling them
can mess up the state or cause infinite loops.
Fix this by disabling IRQs during init and re-enabling them afterwards

Signed-off-by: Felix Fietkau <nbd@nbd.name>

diff --git a/target/linux/ramips/files-4.14/drivers/net/ethernet/mtk/gsw_mt7621.c b/target/linux/ramips/files-4.14/drivers/net/ethernet/mtk/gsw_mt7621.c
index ef0b79e09da088048f7598e2aa52655343babc73..c9fea0caa2ae195df95fa94e53c12af3619c37a6 100644 (file)
--- a/target/linux/ramips/files-4.14/drivers/net/ethernet/mtk/gsw_mt7621.c
+++ b/target/linux/ramips/files-4.14/drivers/net/ethernet/mtk/gsw_mt7621.c
@@ -41,6 +41,7 @@ static irqreturn_t gsw_interrupt_mt7621(int irq, void *_priv)
        u32 reg, i;
 
        reg = mt7530_mdio_r32(gsw, 0x700c);
+       mt7530_mdio_w32(gsw, 0x700c, reg);
 
        for (i = 0; i < 5; i++)
                if (reg & BIT(i)) {
@@ -61,7 +62,6 @@ static irqreturn_t gsw_interrupt_mt7621(int irq, void *_priv)
                }
 
        mt7620_handle_carrier(priv);
-       mt7530_mdio_w32(gsw, 0x700c, 0x1f);
 
        return IRQ_HANDLED;
 }
@@ -193,9 +193,8 @@ static void mt7621_hw_init(struct mt7620_gsw *gsw, struct device_node *np)
                _mt7620_mii_write(gsw, i, 0, val);
        }
 
-       /* mask irq */
-       mt7530_mdio_w32(gsw, 0x7008, 0x1f);
        /* enable irq */
+       mt7530_mdio_w32(gsw, 0x7008, 0x1f);
        val = mt7530_mdio_r32(gsw, 0x7808);
        val |= 3 << 16;
        mt7530_mdio_w32(gsw, 0x7808, val);
@@ -225,10 +224,14 @@ int mtk_gsw_init(struct fe_priv *priv)
        if (gsw->irq) {
                request_irq(gsw->irq, gsw_interrupt_mt7621, 0,
                            "gsw", priv);
-               mt7530_mdio_w32(gsw, 0x7008, ~0x1f);
+               disable_irq(gsw->irq);
        }
+
        mt7621_hw_init(gsw, np);
 
+       if (gsw->irq)
+               enable_irq(gsw->irq);
+
        return 0;
 }