+/*
+ * The Gateworks I2C PLD chip does not properly send the acknowledge bit
+ * thus we cannot use standard i2c_smbus functions. We have recreated
-+ * our own here, but we still use the mutex_lock to lock the i2c_bus
++ * our own here, but we still use the rt_mutex_lock to lock the i2c_bus
+ * as the device still exists on the I2C bus.
+*/
+
+ int ret;
+ struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
+ struct i2c_adapter *adap = gpio->client->adapter;
-+
++
+ if (in_atomic() || irqs_disabled()) {
-+ ret = mutex_trylock(&adap->bus_lock);
++ ret = rt_mutex_trylock(&adap->bus_lock);
+ if (!ret)
+ /* I2C activity is ongoing. */
+ return -EAGAIN;
+ } else {
-+ mutex_lock_nested(&adap->bus_lock, adap->level);
++ rt_mutex_lock(&adap->bus_lock);
+ }
+
+ gpio->out |= (1 << offset);
+
+ ret = i2c_pld_write_byte(gpio->client->addr, gpio->out);
+
-+ mutex_unlock(&adap->bus_lock);
++ rt_mutex_unlock(&adap->bus_lock);
+
+ return ret;
+}
+ s32 value;
+ struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
+ struct i2c_adapter *adap = gpio->client->adapter;
-+
++
+ if (in_atomic() || irqs_disabled()) {
-+ ret = mutex_trylock(&adap->bus_lock);
++ ret = rt_mutex_trylock(&adap->bus_lock);
+ if (!ret)
+ /* I2C activity is ongoing. */
+ return -EAGAIN;
+ } else {
-+ mutex_lock_nested(&adap->bus_lock, adap->level);
++ rt_mutex_lock(&adap->bus_lock);
+ }
+
+ value = i2c_pld_read_byte(gpio->client->addr);
+
-+ mutex_unlock(&adap->bus_lock);
++ rt_mutex_unlock(&adap->bus_lock);
+
+ return (value < 0) ? 0 : (value & (1 << offset));
+}
+ struct i2c_adapter *adap = gpio->client->adapter;
+
+ unsigned bit = 1 << offset;
-+
++
+ if (in_atomic() || irqs_disabled()) {
-+ ret = mutex_trylock(&adap->bus_lock);
++ ret = rt_mutex_trylock(&adap->bus_lock);
+ if (!ret)
+ /* I2C activity is ongoing. */
+ return -EAGAIN;
+ } else {
-+ mutex_lock_nested(&adap->bus_lock, adap->level);
++ rt_mutex_lock(&adap->bus_lock);
+ }
+
+
+
+ ret = i2c_pld_write_byte(gpio->client->addr, gpio->out);
+
-+ mutex_unlock(&adap->bus_lock);
++ rt_mutex_unlock(&adap->bus_lock);
+
+ return ret;
+}