}
-/* Various firmware commands need the list of supported rates, but with
- the hight-bit set for basic rates */
+/*
+ * Various firmware commands need the list of supported rates, but with
+ * the hight-bit set for basic rates
+ */
static int lbs_add_rates(u8 *rates)
{
size_t i;
return ie_len + 2;
}
-/***************************************************************************
+/*
* Set Channel
*/
-/***************************************************************************
+/*
* Scanning
*/
goto done;
}
- /* Validity check: the TLV holds TSF values with 8 bytes each, so
- * the size in the TLV must match the nr_sets value */
+ /*
+ * Validity check: the TLV holds TSF values with 8 bytes each, so
+ * the size in the TLV must match the nr_sets value
+ */
i = get_unaligned_le16(tsfdesc);
tsfdesc += 2;
if (i / 8 != scanresp->nr_sets) {
/* To find out the channel, we must parse the IEs */
ie = pos;
- /* 6+1+8+2+2: size of BSSID, RSSI, time stamp, beacon
- interval, capabilities */
+ /*
+ * 6+1+8+2+2: size of BSSID, RSSI, time stamp, beacon
+ * interval, capabilities
+ */
ielen = left = len - (6 + 1 + 8 + 2 + 2);
while (left >= 2) {
u8 id, elen;
-/***************************************************************************
+/*
* Events
*/
-/***************************************************************************
+/*
* Connect/disconnect
*/
* Set WPA/WPA key material
*/
-/* like "struct cmd_ds_802_11_key_material", but with cmd_header. Once we
- * get rid of WEXT, this should go into host.h */
+/*
+ * like "struct cmd_ds_802_11_key_material", but with cmd_header. Once we
+ * get rid of WEXT, this should go into host.h
+ */
struct cmd_key_material {
struct cmd_header hdr;
}
-/***************************************************************************
+/*
* Get station
*/
-/***************************************************************************
+/*
* "Site survey", here just current channel and noise level
*/
-/***************************************************************************
+/*
* Change interface
*/
-/***************************************************************************
+/*
* IBSS (Ad-Hoc)
*/
-/* The firmware needs the following bits masked out of the beacon-derived
+/*
+ * The firmware needs the following bits masked out of the beacon-derived
* capability field when associating/joining to a BSS:
* 9 (QoS), 11 (APSD), 12 (unused), 14 (unused), 15 (unused)
*/
-/***************************************************************************
+/*
* Initialization
*/
-/**
- * This file contains the handling of command.
- * It prepares command and sends it to firmware when it is ready.
- */
+/*
+ * This file contains the handling of command.
+ * It prepares command and sends it to firmware when it is ready.
+ */
#include <linux/kfifo.h>
#include <linux/sched.h>
#define CAL_RSSI(snr, nf) ((s32)((s32)(snr) + CAL_NF(nf)))
/**
- * @brief Simple callback that copies response back into command
+ * lbs_cmd_copyback - Simple callback that copies response back into command
*
- * @param priv A pointer to struct lbs_private structure
- * @param extra A pointer to the original command structure for which
- * 'resp' is a response
- * @param resp A pointer to the command response
+ * @priv: A pointer to &struct lbs_private structure
+ * @extra: A pointer to the original command structure for which
+ * 'resp' is a response
+ * @resp: A pointer to the command response
*
- * @return 0 on success, error on failure
+ * returns: 0 on success, error on failure
*/
int lbs_cmd_copyback(struct lbs_private *priv, unsigned long extra,
struct cmd_header *resp)
EXPORT_SYMBOL_GPL(lbs_cmd_copyback);
/**
- * @brief Simple callback that ignores the result. Use this if
- * you just want to send a command to the hardware, but don't
+ * lbs_cmd_async_callback - Simple callback that ignores the result.
+ * Use this if you just want to send a command to the hardware, but don't
* care for the result.
*
- * @param priv ignored
- * @param extra ignored
- * @param resp ignored
+ * @priv: ignored
+ * @extra: ignored
+ * @resp: ignored
*
- * @return 0 for success
+ * returns: 0 for success
*/
static int lbs_cmd_async_callback(struct lbs_private *priv, unsigned long extra,
struct cmd_header *resp)
/**
- * @brief Checks whether a command is allowed in Power Save mode
+ * is_command_allowed_in_ps - tests if a command is allowed in Power Save mode
+ *
+ * @cmd: the command ID
*
- * @param command the command ID
- * @return 1 if allowed, 0 if not allowed
+ * returns: 1 if allowed, 0 if not allowed
*/
static u8 is_command_allowed_in_ps(u16 cmd)
{
}
/**
- * @brief Updates the hardware details like MAC address and regulatory region
+ * lbs_update_hw_spec - Updates the hardware details like MAC address
+ * and regulatory region
*
- * @param priv A pointer to struct lbs_private structure
+ * @priv: A pointer to &struct lbs_private structure
*
- * @return 0 on success, error on failure
+ * returns: 0 on success, error on failure
*/
int lbs_update_hw_spec(struct lbs_private *priv)
{
EXPORT_SYMBOL_GPL(lbs_host_sleep_cfg);
/**
- * @brief Sets the Power Save mode
+ * lbs_set_ps_mode - Sets the Power Save mode
*
- * @param priv A pointer to struct lbs_private structure
- * @param cmd_action The Power Save operation (PS_MODE_ACTION_ENTER_PS or
+ * @priv: A pointer to &struct lbs_private structure
+ * @cmd_action: The Power Save operation (PS_MODE_ACTION_ENTER_PS or
* PS_MODE_ACTION_EXIT_PS)
- * @param block Whether to block on a response or not
+ * @block: Whether to block on a response or not
*
- * @return 0 on success, error on failure
+ * returns: 0 on success, error on failure
*/
int lbs_set_ps_mode(struct lbs_private *priv, u16 cmd_action, bool block)
{
}
/**
- * @brief Set an SNMP MIB value
+ * lbs_set_snmp_mib - Set an SNMP MIB value
*
- * @param priv A pointer to struct lbs_private structure
- * @param oid The OID to set in the firmware
- * @param val Value to set the OID to
+ * @priv: A pointer to &struct lbs_private structure
+ * @oid: The OID to set in the firmware
+ * @val: Value to set the OID to
*
- * @return 0 on success, error on failure
+ * returns: 0 on success, error on failure
*/
int lbs_set_snmp_mib(struct lbs_private *priv, u32 oid, u16 val)
{
}
/**
- * @brief Get an SNMP MIB value
+ * lbs_get_snmp_mib - Get an SNMP MIB value
*
- * @param priv A pointer to struct lbs_private structure
- * @param oid The OID to retrieve from the firmware
- * @param out_val Location for the returned value
+ * @priv: A pointer to &struct lbs_private structure
+ * @oid: The OID to retrieve from the firmware
+ * @out_val: Location for the returned value
*
- * @return 0 on success, error on failure
+ * returns: 0 on success, error on failure
*/
int lbs_get_snmp_mib(struct lbs_private *priv, u32 oid, u16 *out_val)
{
}
/**
- * @brief Get the min, max, and current TX power
+ * lbs_get_tx_power - Get the min, max, and current TX power
*
- * @param priv A pointer to struct lbs_private structure
- * @param curlevel Current power level in dBm
- * @param minlevel Minimum supported power level in dBm (optional)
- * @param maxlevel Maximum supported power level in dBm (optional)
+ * @priv: A pointer to &struct lbs_private structure
+ * @curlevel: Current power level in dBm
+ * @minlevel: Minimum supported power level in dBm (optional)
+ * @maxlevel: Maximum supported power level in dBm (optional)
*
- * @return 0 on success, error on failure
+ * returns: 0 on success, error on failure
*/
int lbs_get_tx_power(struct lbs_private *priv, s16 *curlevel, s16 *minlevel,
s16 *maxlevel)
}
/**
- * @brief Set the TX power
+ * lbs_set_tx_power - Set the TX power
*
- * @param priv A pointer to struct lbs_private structure
- * @param dbm The desired power level in dBm
+ * @priv: A pointer to &struct lbs_private structure
+ * @dbm: The desired power level in dBm
*
- * @return 0 on success, error on failure
+ * returns: 0 on success, error on failure
*/
int lbs_set_tx_power(struct lbs_private *priv, s16 dbm)
{
}
/**
- * @brief Enable or disable monitor mode (only implemented on OLPC usb8388 FW)
+ * lbs_set_monitor_mode - Enable or disable monitor mode
+ * (only implemented on OLPC usb8388 FW)
*
- * @param priv A pointer to struct lbs_private structure
- * @param enable 1 to enable monitor mode, 0 to disable
+ * @priv: A pointer to &struct lbs_private structure
+ * @enable: 1 to enable monitor mode, 0 to disable
*
- * @return 0 on success, error on failure
+ * returns: 0 on success, error on failure
*/
int lbs_set_monitor_mode(struct lbs_private *priv, int enable)
{
}
/**
- * @brief Get the radio channel
+ * lbs_get_channel - Get the radio channel
*
- * @param priv A pointer to struct lbs_private structure
+ * @priv: A pointer to &struct lbs_private structure
*
- * @return The channel on success, error on failure
+ * returns: The channel on success, error on failure
*/
static int lbs_get_channel(struct lbs_private *priv)
{
}
/**
- * @brief Set the radio channel
+ * lbs_set_channel - Set the radio channel
*
- * @param priv A pointer to struct lbs_private structure
- * @param channel The desired channel, or 0 to clear a locked channel
+ * @priv: A pointer to &struct lbs_private structure
+ * @channel: The desired channel, or 0 to clear a locked channel
*
- * @return 0 on success, error on failure
+ * returns: 0 on success, error on failure
*/
int lbs_set_channel(struct lbs_private *priv, u8 channel)
{
}
/**
- * @brief Get current RSSI and noise floor
+ * lbs_get_rssi - Get current RSSI and noise floor
*
- * @param priv A pointer to struct lbs_private structure
- * @param rssi On successful return, signal level in mBm
+ * @priv: A pointer to &struct lbs_private structure
+ * @rssi: On successful return, signal level in mBm
+ * @nf: On successful return, Noise floor
*
- * @return The channel on success, error on failure
+ * returns: The channel on success, error on failure
*/
int lbs_get_rssi(struct lbs_private *priv, s8 *rssi, s8 *nf)
{
}
/**
- * @brief Send regulatory and 802.11d domain information to the firmware
+ * lbs_set_11d_domain_info - Send regulatory and 802.11d domain information
+ * to the firmware
*
- * @param priv pointer to struct lbs_private
- * @param request cfg80211 regulatory request structure
- * @param bands the device's supported bands and channels
+ * @priv: pointer to &struct lbs_private
+ * @request: cfg80211 regulatory request structure
+ * @bands: the device's supported bands and channels
*
- * @return 0 on success, error code on failure
+ * returns: 0 on success, error code on failure
*/
int lbs_set_11d_domain_info(struct lbs_private *priv,
struct regulatory_request *request,
}
/**
- * @brief Read a MAC, Baseband, or RF register
+ * lbs_get_reg - Read a MAC, Baseband, or RF register
*
- * @param priv pointer to struct lbs_private
- * @param cmd register command, one of CMD_MAC_REG_ACCESS,
- * CMD_BBP_REG_ACCESS, or CMD_RF_REG_ACCESS
- * @param offset byte offset of the register to get
- * @param value on success, the value of the register at 'offset'
+ * @priv: pointer to &struct lbs_private
+ * @reg: register command, one of CMD_MAC_REG_ACCESS,
+ * CMD_BBP_REG_ACCESS, or CMD_RF_REG_ACCESS
+ * @offset: byte offset of the register to get
+ * @value: on success, the value of the register at 'offset'
*
- * @return 0 on success, error code on failure
+ * returns: 0 on success, error code on failure
*/
int lbs_get_reg(struct lbs_private *priv, u16 reg, u16 offset, u32 *value)
{
}
/**
- * @brief Write a MAC, Baseband, or RF register
+ * lbs_set_reg - Write a MAC, Baseband, or RF register
*
- * @param priv pointer to struct lbs_private
- * @param cmd register command, one of CMD_MAC_REG_ACCESS,
- * CMD_BBP_REG_ACCESS, or CMD_RF_REG_ACCESS
- * @param offset byte offset of the register to set
- * @param value the value to write to the register at 'offset'
+ * @priv: pointer to &struct lbs_private
+ * @reg: register command, one of CMD_MAC_REG_ACCESS,
+ * CMD_BBP_REG_ACCESS, or CMD_RF_REG_ACCESS
+ * @offset: byte offset of the register to set
+ * @value: the value to write to the register at 'offset'
*
- * @return 0 on success, error code on failure
+ * returns: 0 on success, error code on failure
*/
int lbs_set_reg(struct lbs_private *priv, u16 reg, u16 offset, u32 value)
{
lbs_deb_leave(LBS_DEB_HOST);
}
-/**
+/*
* This function inserts command node to cmdfreeq
* after cleans it. Requires priv->driver_lock held.
*/
}
/**
- * @brief This function allocates the command buffer and link
- * it to command free queue.
+ * lbs_allocate_cmd_buffer - allocates the command buffer and links
+ * it to command free queue
+ *
+ * @priv: A pointer to &struct lbs_private structure
*
- * @param priv A pointer to struct lbs_private structure
- * @return 0 or -1
+ * returns: 0 for success or -1 on error
*/
int lbs_allocate_cmd_buffer(struct lbs_private *priv)
{
}
/**
- * @brief This function frees the command buffer.
+ * lbs_free_cmd_buffer - free the command buffer
*
- * @param priv A pointer to struct lbs_private structure
- * @return 0 or -1
+ * @priv: A pointer to &struct lbs_private structure
+ *
+ * returns: 0 for success
*/
int lbs_free_cmd_buffer(struct lbs_private *priv)
{
}
/**
- * @brief This function gets a free command node if available in
- * command free queue.
+ * lbs_get_free_cmd_node - gets a free command node if available in
+ * command free queue
+ *
+ * @priv: A pointer to &struct lbs_private structure
*
- * @param priv A pointer to struct lbs_private structure
- * @return cmd_ctrl_node A pointer to cmd_ctrl_node structure or NULL
+ * returns: A pointer to &cmd_ctrl_node structure on success
+ * or %NULL on error
*/
static struct cmd_ctrl_node *lbs_get_free_cmd_node(struct lbs_private *priv)
{
}
/**
- * @brief This function executes next command in command
- * pending queue. It will put firmware back to PS mode
- * if applicable.
+ * lbs_execute_next_command - execute next command in command
+ * pending queue. Will put firmware back to PS mode if applicable.
*
- * @param priv A pointer to struct lbs_private structure
- * @return 0 or -1
+ * @priv: A pointer to &struct lbs_private structure
+ *
+ * returns: 0 on success or -1 on error
*/
int lbs_execute_next_command(struct lbs_private *priv)
{
}
/**
- * @brief This function checks condition and prepares to
- * send sleep confirm command to firmware if ok.
+ * lbs_ps_confirm_sleep - checks condition and prepares to
+ * send sleep confirm command to firmware if ok
+ *
+ * @priv: A pointer to &struct lbs_private structure
*
- * @param priv A pointer to struct lbs_private structure
- * @param psmode Power Saving mode
- * @return n/a
+ * returns: n/a
*/
void lbs_ps_confirm_sleep(struct lbs_private *priv)
{
/**
- * @brief Configures the transmission power control functionality.
+ * lbs_set_tpc_cfg - Configures the transmission power control functionality
*
- * @param priv A pointer to struct lbs_private structure
- * @param enable Transmission power control enable
- * @param p0 Power level when link quality is good (dBm).
- * @param p1 Power level when link quality is fair (dBm).
- * @param p2 Power level when link quality is poor (dBm).
- * @param usesnr Use Signal to Noise Ratio in TPC
+ * @priv: A pointer to &struct lbs_private structure
+ * @enable: Transmission power control enable
+ * @p0: Power level when link quality is good (dBm).
+ * @p1: Power level when link quality is fair (dBm).
+ * @p2: Power level when link quality is poor (dBm).
+ * @usesnr: Use Signal to Noise Ratio in TPC
*
- * @return 0 on success
+ * returns: 0 on success
*/
int lbs_set_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1,
int8_t p2, int usesnr)
}
/**
- * @brief Configures the power adaptation settings.
+ * lbs_set_power_adapt_cfg - Configures the power adaptation settings
*
- * @param priv A pointer to struct lbs_private structure
- * @param enable Power adaptation enable
- * @param p0 Power level for 1, 2, 5.5 and 11 Mbps (dBm).
- * @param p1 Power level for 6, 9, 12, 18, 22, 24 and 36 Mbps (dBm).
- * @param p2 Power level for 48 and 54 Mbps (dBm).
+ * @priv: A pointer to &struct lbs_private structure
+ * @enable: Power adaptation enable
+ * @p0: Power level for 1, 2, 5.5 and 11 Mbps (dBm).
+ * @p1: Power level for 6, 9, 12, 18, 22, 24 and 36 Mbps (dBm).
+ * @p2: Power level for 48 and 54 Mbps (dBm).
*
- * @return 0 on Success
+ * returns: 0 on Success
*/
int lbs_set_power_adapt_cfg(struct lbs_private *priv, int enable, int8_t p0,
-/**
- * This file contains the handling of command
- * responses as well as events generated by firmware.
- */
+/*
+ * This file contains the handling of command
+ * responses as well as events generated by firmware.
+ */
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include "cmd.h"
/**
- * @brief This function handles disconnect event. it
- * reports disconnect to upper layer, clean tx/rx packets,
- * reset link state etc.
+ * lbs_mac_event_disconnected - handles disconnect event. It
+ * reports disconnect to upper layer, clean tx/rx packets,
+ * reset link state etc.
+ *
+ * @priv: A pointer to struct lbs_private structure
*
- * @param priv A pointer to struct lbs_private structure
- * @return n/a
+ * returns: n/a
*/
void lbs_mac_event_disconnected(struct lbs_private *priv)
{
static int num_of_items = ARRAY_SIZE(items);
/**
- * @brief proc read function
+ * lbs_debugfs_read - proc read function
*
- * @param page pointer to buffer
- * @param s read data starting position
- * @param off offset
- * @param cnt counter
- * @param eof end of file flag
- * @param data data to output
- * @return number of output data
+ * @file: file to read
+ * @userbuf: pointer to buffer
+ * @count: number of bytes to read
+ * @ppos: read data starting position
+ *
+ * returns: amount of data read or negative error code
*/
static ssize_t lbs_debugfs_read(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
}
/**
- * @brief proc write function
+ * lbs_debugfs_write - proc write function
+ *
+ * @f: file pointer
+ * @buf: pointer to data buffer
+ * @cnt: data number to write
+ * @ppos: file position
*
- * @param f file pointer
- * @param buf pointer to data buffer
- * @param cnt data number to write
- * @param data data to write
- * @return number of data
+ * returns: amount of data written
*/
static ssize_t lbs_debugfs_write(struct file *f, const char __user *buf,
size_t cnt, loff_t *ppos)
};
/**
- * @brief create debug proc file
+ * lbs_debug_init - create debug proc file
+ *
+ * @priv: pointer to &struct lbs_private
*
- * @param priv pointer struct lbs_private
- * @param dev pointer net_device
- * @return N/A
+ * returns: N/A
*/
static void lbs_debug_init(struct lbs_private *priv)
{
-/**
- * This file contains declaration referring to
- * functions defined in other source files
- */
+/*
+ * This file contains declaration referring to
+ * functions defined in other source files
+ */
#ifndef _LBS_DECL_H_
#define _LBS_DECL_H_
-/**
- * This header file contains global constant/enum definitions,
- * global variable declaration.
- */
+/*
+ * This header file contains global constant/enum definitions,
+ * global variable declaration.
+ */
#ifndef _LBS_DEFS_H_
#define _LBS_DEFS_H_
-/** Buffer Constants */
+/* Buffer Constants */
/* The size of SQ memory PPA, DPA are 8 DWORDs, that keep the physical
-* addresses of TxPD buffers. Station has only 8 TxPD available, Whereas
-* driver has more local TxPDs. Each TxPD on the host memory is associated
-* with a Tx control node. The driver maintains 8 RxPD descriptors for
-* station firmware to store Rx packet information.
-*
-* Current version of MAC has a 32x6 multicast address buffer.
-*
-* 802.11b can have up to 14 channels, the driver keeps the
-* BSSID(MAC address) of each APs or Ad hoc stations it has sensed.
-*/
+ * addresses of TxPD buffers. Station has only 8 TxPD available, Whereas
+ * driver has more local TxPDs. Each TxPD on the host memory is associated
+ * with a Tx control node. The driver maintains 8 RxPD descriptors for
+ * station firmware to store Rx packet information.
+ *
+ * Current version of MAC has a 32x6 multicast address buffer.
+ *
+ * 802.11b can have up to 14 channels, the driver keeps the
+ * BSSID(MAC address) of each APs or Ad hoc stations it has sensed.
+ */
#define MRVDRV_MAX_MULTICAST_LIST_SIZE 32
#define LBS_NUM_CMD_BUFFERS 10
#define WOL_RESULT_NOSPC_ERR 1
#define WOL_RESULT_EEXIST_ERR 2
-/** Misc constants */
+/* Misc constants */
/* This section defines 802.11 specific contants */
#define MRVDRV_MAX_BSS_DESCRIPTS 16
#define MARVELL_MESH_IE_LENGTH 9
-/* Values used to populate the struct mrvl_mesh_ie. The only time you need this
+/*
+ * Values used to populate the struct mrvl_mesh_ie. The only time you need this
* is when enabling the mesh using CMD_MESH_CONFIG.
*/
#define MARVELL_MESH_IE_TYPE 4
#define MARVELL_MESH_METRIC_ID 0
#define MARVELL_MESH_CAPABILITY 0
-/** INT status Bit Definition*/
+/* INT status Bit Definition */
#define MRVDRV_TX_DNLD_RDY 0x0001
#define MRVDRV_RX_UPLD_RDY 0x0002
#define MRVDRV_CMD_DNLD_RDY 0x0004
#define TPC_DEFAULT_P1 10
#define TPC_DEFAULT_P2 13
-/** TxPD status */
+/* TxPD status */
-/* Station firmware use TxPD status field to report final Tx transmit
-* result, Bit masks are used to present combined situations.
-*/
+/*
+ * Station firmware use TxPD status field to report final Tx transmit
+ * result, Bit masks are used to present combined situations.
+ */
#define MRVDRV_TxPD_POWER_MGMT_NULL_PACKET 0x01
#define MRVDRV_TxPD_POWER_MGMT_LAST_PACKET 0x08
-/** Tx mesh flag */
-/* Currently we are using normal WDS flag as mesh flag.
+/* Tx mesh flag */
+/*
+ * Currently we are using normal WDS flag as mesh flag.
* TODO: change to proper mesh flag when MAC understands it.
*/
#define TxPD_CONTROL_WDS_FRAME (1<<17)
#define TxPD_MESH_FRAME TxPD_CONTROL_WDS_FRAME
-/** Mesh interface ID */
+/* Mesh interface ID */
#define MESH_IFACE_ID 0x0001
-/** Mesh id should be in bits 14-13-12 */
+/* Mesh id should be in bits 14-13-12 */
#define MESH_IFACE_BIT_OFFSET 0x000c
-/** Mesh enable bit in FW capability */
+/* Mesh enable bit in FW capability */
#define MESH_CAPINFO_ENABLE_MASK (1<<16)
-/** FW definition from Marvell v4 */
+/* FW definition from Marvell v4 */
#define MRVL_FW_V4 (0x04)
-/** FW definition from Marvell v5 */
+/* FW definition from Marvell v5 */
#define MRVL_FW_V5 (0x05)
-/** FW definition from Marvell v10 */
+/* FW definition from Marvell v10 */
#define MRVL_FW_V10 (0x0a)
-/** FW major revision definition */
+/* FW major revision definition */
#define MRVL_FW_MAJOR_REV(x) ((x)>>24)
-/** RxPD status */
+/* RxPD status */
#define MRVDRV_RXPD_STATUS_OK 0x0001
-/** RxPD status - Received packet types */
-/** Rx mesh flag */
-/* Currently we are using normal WDS flag as mesh flag.
+/* RxPD status - Received packet types */
+/* Rx mesh flag */
+/*
+ * Currently we are using normal WDS flag as mesh flag.
* TODO: change to proper mesh flag when MAC understands it.
*/
#define RxPD_CONTROL_WDS_FRAME (0x40)
#define RxPD_MESH_FRAME RxPD_CONTROL_WDS_FRAME
-/** RSSI-related defines */
-/* RSSI constants are used to implement 802.11 RSSI threshold
-* indication. if the Rx packet signal got too weak for 5 consecutive
-* times, miniport driver (driver) will report this event to wrapper
-*/
+/* RSSI-related defines */
+/*
+ * RSSI constants are used to implement 802.11 RSSI threshold
+ * indication. if the Rx packet signal got too weak for 5 consecutive
+ * times, miniport driver (driver) will report this event to wrapper
+ */
#define MRVDRV_NF_DEFAULT_SCAN_VALUE (-96)
-/** RTS/FRAG related defines */
+/* RTS/FRAG related defines */
#define MRVDRV_RTS_MIN_VALUE 0
#define MRVDRV_RTS_MAX_VALUE 2347
#define MRVDRV_FRAG_MIN_VALUE 256
#define MAX_LEDS 8
-/** Global Variable Declaration */
+/* Global Variable Declaration */
extern const char lbs_driver_version[];
extern u16 lbs_region_code_to_index[MRVDRV_MAX_REGION_CODE];
-/** ENUM definition*/
-/** SNRNF_TYPE */
+/* ENUM definition */
+/* SNRNF_TYPE */
enum SNRNF_TYPE {
TYPE_BEACON = 0,
TYPE_RXPD,
MAX_TYPE_B
};
-/** SNRNF_DATA*/
+/* SNRNF_DATA */
enum SNRNF_DATA {
TYPE_NOAVG = 0,
TYPE_AVG,
MAX_TYPE_AVG
};
-/** LBS_802_11_POWER_MODE */
+/* LBS_802_11_POWER_MODE */
enum LBS_802_11_POWER_MODE {
LBS802_11POWERMODECAM,
LBS802_11POWERMODEMAX_PSP,
LBS802_11POWERMODEFAST_PSP,
- /*not a real mode, defined as an upper bound */
+ /* not a real mode, defined as an upper bound */
LBS802_11POWEMODEMAX
};
-/** PS_STATE */
+/* PS_STATE */
enum PS_STATE {
PS_STATE_FULL_POWER,
PS_STATE_AWAKE,
PS_STATE_SLEEP
};
-/** DNLD_STATE */
+/* DNLD_STATE */
enum DNLD_STATE {
DNLD_RES_RECEIVED,
DNLD_DATA_SENT,
DNLD_BOOTCMD_SENT,
};
-/** LBS_MEDIA_STATE */
+/* LBS_MEDIA_STATE */
enum LBS_MEDIA_STATE {
LBS_CONNECTED,
LBS_DISCONNECTED
};
-/** LBS_802_11_PRIVACY_FILTER */
+/* LBS_802_11_PRIVACY_FILTER */
enum LBS_802_11_PRIVACY_FILTER {
LBS802_11PRIVFILTERACCEPTALL,
LBS802_11PRIVFILTER8021XWEP
};
-/** mv_ms_type */
+/* mv_ms_type */
enum mv_ms_type {
MVMS_DAT = 0,
MVMS_CMD = 1,
MVMS_EVENT
};
-/** KEY_TYPE_ID */
+/* KEY_TYPE_ID */
enum KEY_TYPE_ID {
KEY_TYPE_ID_WEP = 0,
KEY_TYPE_ID_TKIP,
KEY_TYPE_ID_AES
};
-/** KEY_INFO_WPA (applies to both TKIP and AES/CCMP) */
+/* KEY_INFO_WPA (applies to both TKIP and AES/CCMP) */
enum KEY_INFO_WPA {
KEY_INFO_WPA_MCAST = 0x01,
KEY_INFO_WPA_UNICAST = 0x02,
-/**
- * This file contains definitions and data structures specific
- * to Marvell 802.11 NIC. It contains the Device Information
- * structure struct lbs_private..
- */
+/*
+ * This file contains definitions and data structures specific
+ * to Marvell 802.11 NIC. It contains the Device Information
+ * structure struct lbs_private..
+ */
#ifndef _LBS_DEV_H_
#define _LBS_DEV_H_
#include <linux/kfifo.h>
-/** sleep_params */
+/* sleep_params */
struct sleep_params {
uint16_t sp_error;
uint16_t sp_offset;
};
-/** Private structure for the MV device */
+/* Private structure for the MV device */
struct lbs_private {
/* Basic networking */
/* Events sent from hardware to driver */
struct kfifo event_fifo;
- /** thread to service interrupts */
+ /* thread to service interrupts */
struct task_struct *main_thread;
wait_queue_head_t waitq;
struct workqueue_struct *work_thread;
- /** Encryption stuff */
+ /* Encryption stuff */
u8 authtype_auto;
u8 wep_tx_key;
u8 wep_key[4][WLAN_KEY_LEN_WEP104];
s16 txpower_min;
s16 txpower_max;
- /** Scanning */
+ /* Scanning */
struct delayed_work scan_work;
int scan_channel;
/* Queue of things waiting for scan completion */
strcpy(info->version, lbs_driver_version);
}
-/* All 8388 parts have 16KiB EEPROM size at the time of writing.
+/*
+ * All 8388 parts have 16KiB EEPROM size at the time of writing.
* In case that changes this needs fixing.
*/
#define LBS_EEPROM_LEN 16384
-/**
- * This file function prototypes, data structure
- * and definitions for all the host/station commands
- */
+/*
+ * This file function prototypes, data structure
+ * and definitions for all the host/station commands
+ */
#ifndef _LBS_HOST_H_
#define _LBS_HOST_H_
#define CMD_OPTION_WAITFORRSP 0x0002
-/** Host command IDs */
+/* Host command IDs */
-/* Return command are almost always the same as the host command, but with
+/*
+ * Return command are almost always the same as the host command, but with
* bit 15 set high. There are a few exceptions, though...
*/
#define CMD_RET(cmd) (0x8000 | cmd)
CMD_TYPE_MESH_GET_MESH_IE, /* GET_DEFAULTS is superset of GET_MESHIE */
};
-/** Card Event definition */
+/* Card Event definition */
#define MACREG_INT_CODE_TX_PPA_FREE 0
#define MACREG_INT_CODE_TX_DMA_DONE 1
#define MACREG_INT_CODE_LINK_LOST_W_SCAN 2
struct cmd_ds_802_11_rssi {
struct cmd_header hdr;
- /* request: number of beacons (N) to average the SNR and NF over
+ /*
+ * request: number of beacons (N) to average the SNR and NF over
* response: SNR of most recent beacon
*/
__le16 n_or_snr;
- /* The following fields are only set in the response.
+ /*
+ * The following fields are only set in the response.
* In the request these are reserved and should be set to 0.
*/
__le16 nf; /* most recent beacon noise floor */
__le16 action;
- /* Interval for keepalive in PS mode:
+ /*
+ * Interval for keepalive in PS mode:
* 0x0000 = don't change
* 0x001E = firmware default
* 0xFFFF = disable
*/
__le16 nullpktinterval;
- /* Number of DTIM intervals to wake up for:
+ /*
+ * Number of DTIM intervals to wake up for:
* 0 = don't change
* 1 = firmware default
* 5 = max
__le16 reserved;
__le16 locallisteninterval;
- /* AdHoc awake period (FW v9+ only):
+ /*
+ * AdHoc awake period (FW v9+ only):
* 0 = don't change
* 1 = always awake (IEEE standard behavior)
* 2 - 31 = sleep for (n - 1) periods and awake for 1 period
__le16 capability;
u8 rates[MAX_RATES];
- /* DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the
+ /*
+ * DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the
* Adhoc join command and will cause a binary layout mismatch with
* the firmware
*/
#define CF8385_MANFID 0x02df
#define CF8385_CARDID 0x8103
-/* FIXME: just use the 'driver_info' field of 'struct pcmcia_device_id' when
+/*
+ * FIXME: just use the 'driver_info' field of 'struct pcmcia_device_id' when
* that gets fixed. Currently there's no way to access it from the probe hook.
*/
static inline u32 get_model(u16 manf_id, u16 card_id)
if (remain < count)
count = remain;
- /* "write the number of bytes to be sent to the I/O Command
- * write length register" */
+ /*
+ * "write the number of bytes to be sent to the I/O Command
+ * write length register"
+ */
if_cs_write16(card, IF_CS_CMD_LEN, count);
/* "write this to I/O Command port register as 16 bit writes */
&fw->data[sent],
count >> 1);
- /* "Assert the download over interrupt command in the Host
- * status register" */
+ /*
+ * "Assert the download over interrupt command in the Host
+ * status register"
+ */
if_cs_write8(card, IF_CS_HOST_STATUS, IF_CS_BIT_COMMAND);
- /* "Assert the download over interrupt command in the Card
- * interrupt case register" */
+ /*
+ * "Assert the download over interrupt command in the Card
+ * interrupt case register"
+ */
if_cs_write16(card, IF_CS_HOST_INT_CAUSE, IF_CS_BIT_COMMAND);
- /* "The host polls the Card Status register ... for 50 ms before
- declaring a failure */
+ /*
+ * "The host polls the Card Status register ... for 50 ms before
+ * declaring a failure"
+ */
ret = if_cs_poll_while_fw_download(card, IF_CS_CARD_STATUS,
IF_CS_BIT_COMMAND);
if (ret < 0) {
/*
* Most of the libertas cards can do unaligned register access, but some
- * weird ones can not. That's especially true for the CF8305 card.
+ * weird ones cannot. That's especially true for the CF8305 card.
*/
card->align_regs = 0;
goto out3;
}
- /* Clear any interrupt cause that happend while sending
- * firmware/initializing card */
+ /*
+ * Clear any interrupt cause that happened while sending
+ * firmware/initializing card
+ */
if_cs_write16(card, IF_CS_CARD_INT_CAUSE, IF_CS_BIT_MASK);
if_cs_enable_ints(card);
card->prev_xfer_time = jiffies;
}
-/* Write out a byte buffer to an SPI register,
- * using a series of 16-bit transfers. */
+/*
+ * Write out a byte buffer to an SPI register,
+ * using a series of 16-bit transfers.
+ */
static int spu_write(struct if_spi_card *card, u16 reg, const u8 *buf, int len)
{
int err = 0;
struct spi_transfer dummy_trans;
struct spi_transfer data_trans;
- /* You must take an even number of bytes from the SPU, even if you
- * don't care about the last one. */
+ /*
+ * You must take an even number of bytes from the SPU, even if you
+ * don't care about the last one.
+ */
BUG_ON(len & 0x1);
spu_transaction_init(card);
return ret;
}
-/* Read 32 bits from an SPI register.
- * The low 16 bits are read first. */
+/*
+ * Read 32 bits from an SPI register.
+ * The low 16 bits are read first.
+ */
static int spu_read_u32(struct if_spi_card *card, u16 reg, u32 *val)
{
__le32 buf;
return err;
}
-/* Keep reading 16 bits from an SPI register until you get the correct result.
+/*
+ * Keep reading 16 bits from an SPI register until you get the correct result.
*
* If mask = 0, the correct result is any non-zero number.
* If mask != 0, the correct result is any number where
* number & target_mask == target
*
- * Returns -ETIMEDOUT if a second passes without the correct result. */
+ * Returns -ETIMEDOUT if a second passes without the correct result.
+ */
static int spu_wait_for_u16(struct if_spi_card *card, u16 reg,
u16 target_mask, u16 target)
{
}
}
-/* Read 16 bits from an SPI register until you receive a specific value.
- * Returns -ETIMEDOUT if a 4 tries pass without success. */
+/*
+ * Read 16 bits from an SPI register until you receive a specific value.
+ * Returns -ETIMEDOUT if a 4 tries pass without success.
+ */
static int spu_wait_for_u32(struct if_spi_card *card, u32 reg, u32 target)
{
int err, try;
{
int err = 0;
- /* We can suppress a host interrupt by clearing the appropriate
- * bit in the "host interrupt status mask" register */
+ /*
+ * We can suppress a host interrupt by clearing the appropriate
+ * bit in the "host interrupt status mask" register
+ */
if (suppress_host_int) {
err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_MASK_REG, 0);
if (err)
return err;
}
- /* If auto-interrupts are on, the completion of certain transactions
+ /*
+ * If auto-interrupts are on, the completion of certain transactions
* will trigger an interrupt automatically. If auto-interrupts
* are off, we need to set the "Card Interrupt Cause" register to
- * trigger a card interrupt. */
+ * trigger a card interrupt.
+ */
if (auto_int) {
err = spu_write_u16(card, IF_SPI_HOST_INT_CTRL_REG,
IF_SPI_HICT_TX_DOWNLOAD_OVER_AUTO |
int err = 0;
u32 delay;
- /* We have to start up in timed delay mode so that we can safely
- * read the Delay Read Register. */
+ /*
+ * We have to start up in timed delay mode so that we can safely
+ * read the Delay Read Register.
+ */
card->use_dummy_writes = 0;
err = spu_set_bus_mode(card,
IF_SPI_BUS_MODE_SPI_CLOCK_PHASE_RISING |
/* Load helper firmware image */
while (bytes_remaining > 0) {
- /* Scratch pad 1 should contain the number of bytes we
- * want to download to the firmware */
+ /*
+ * Scratch pad 1 should contain the number of bytes we
+ * want to download to the firmware
+ */
err = spu_write_u16(card, IF_SPI_SCRATCH_1_REG,
HELPER_FW_LOAD_CHUNK_SZ);
if (err)
if (err)
goto out;
- /* Feed the data into the command read/write port reg
- * in chunks of 64 bytes */
+ /*
+ * Feed the data into the command read/write port reg
+ * in chunks of 64 bytes
+ */
memset(temp, 0, sizeof(temp));
memcpy(temp, fw,
min(bytes_remaining, HELPER_FW_LOAD_CHUNK_SZ));
fw += HELPER_FW_LOAD_CHUNK_SZ;
}
- /* Once the helper / single stage firmware download is complete,
+ /*
+ * Once the helper / single stage firmware download is complete,
* write 0 to scratch pad 1 and interrupt the
- * bootloader. This completes the helper download. */
+ * bootloader. This completes the helper download.
+ */
err = spu_write_u16(card, IF_SPI_SCRATCH_1_REG, FIRMWARE_DNLD_OK);
if (err)
goto out;
return err;
}
-/* Returns the length of the next packet the firmware expects us to send
- * Sets crc_err if the previous transfer had a CRC error. */
+/*
+ * Returns the length of the next packet the firmware expects us to send.
+ * Sets crc_err if the previous transfer had a CRC error.
+ */
static int if_spi_prog_main_firmware_check_len(struct if_spi_card *card,
int *crc_err)
{
u16 len;
int err = 0;
- /* wait until the host interrupt status register indicates
- * that we are ready to download */
+ /*
+ * wait until the host interrupt status register indicates
+ * that we are ready to download
+ */
err = spu_wait_for_u16(card, IF_SPI_HOST_INT_STATUS_REG,
IF_SPI_HIST_CMD_DOWNLOAD_RDY,
IF_SPI_HIST_CMD_DOWNLOAD_RDY);
goto out;
}
if (bytes < 0) {
- /* If there are no more bytes left, we would normally
- * expect to have terminated with len = 0 */
+ /*
+ * If there are no more bytes left, we would normally
+ * expect to have terminated with len = 0
+ */
lbs_pr_err("Firmware load wants more bytes "
"than we have to offer.\n");
break;
u16 len;
u8 i;
- /* We need a buffer big enough to handle whatever people send to
- * hw_host_to_card */
+ /*
+ * We need a buffer big enough to handle whatever people send to
+ * hw_host_to_card
+ */
BUILD_BUG_ON(IF_SPI_CMD_BUF_SIZE < LBS_CMD_BUFFER_SIZE);
BUILD_BUG_ON(IF_SPI_CMD_BUF_SIZE < LBS_UPLD_SIZE);
- /* It's just annoying if the buffer size isn't a multiple of 4, because
- * then we might have len < IF_SPI_CMD_BUF_SIZE but
- * ALIGN(len, 4) > IF_SPI_CMD_BUF_SIZE */
+ /*
+ * It's just annoying if the buffer size isn't a multiple of 4, because
+ * then we might have len < IF_SPI_CMD_BUF_SIZE but
+ * ALIGN(len, 4) > IF_SPI_CMD_BUF_SIZE
+ */
BUILD_BUG_ON(IF_SPI_CMD_BUF_SIZE % 4 != 0);
lbs_deb_enter(LBS_DEB_SPI);
lbs_deb_enter(LBS_DEB_SPI);
- /* Read the host interrupt status register to see what we
- * can do. */
+ /*
+ * Read the host interrupt status register to see what we
+ * can do.
+ */
err = spu_read_u16(card, IF_SPI_HOST_INT_STATUS_REG,
&hiStatus);
if (err) {
goto err;
}
- /* workaround: in PS mode, the card does not set the Command
- * Download Ready bit, but it sets TX Download Ready. */
+ /*
+ * workaround: in PS mode, the card does not set the Command
+ * Download Ready bit, but it sets TX Download Ready.
+ */
if (hiStatus & IF_SPI_HIST_CMD_DOWNLOAD_RDY ||
(card->priv->psstate != PS_STATE_FULL_POWER &&
(hiStatus & IF_SPI_HIST_TX_DOWNLOAD_RDY))) {
- /* This means two things. First of all,
+ /*
+ * This means two things. First of all,
* if there was a previous command sent, the card has
* successfully received it.
* Secondly, it is now ready to download another
*/
lbs_host_to_card_done(card->priv);
- /* Do we have any command packets from the host to
- * send? */
+ /* Do we have any command packets from the host to send? */
packet = NULL;
spin_lock_irqsave(&card->buffer_lock, flags);
if (!list_empty(&card->cmd_packet_list)) {
if_spi_h2c(card, packet, MVMS_CMD);
}
if (hiStatus & IF_SPI_HIST_TX_DOWNLOAD_RDY) {
- /* Do we have any data packets from the host to
- * send? */
+ /* Do we have any data packets from the host to send? */
packet = NULL;
spin_lock_irqsave(&card->buffer_lock, flags);
if (!list_empty(&card->data_packet_list)) {
* Host to Card
*
* Called from Libertas to transfer some data to the WLAN device
- * We can't sleep here. */
+ * We can't sleep here.
+ */
static int if_spi_host_to_card(struct lbs_private *priv,
u8 type, u8 *buf, u16 nb)
{
if (err)
goto free_card;
- /* Register our card with libertas.
- * This will call alloc_etherdev */
+ /*
+ * Register our card with libertas.
+ * This will call alloc_etherdev.
+ */
priv = lbs_add_card(card, &spi->dev);
if (!priv) {
err = -ENOMEM;
goto terminate_workqueue;
}
- /* Start the card.
+ /*
+ * Start the card.
* This will call register_netdev, and we'll start
- * getting interrupts... */
+ * getting interrupts...
+ */
err = lbs_start_card(priv);
if (err)
goto release_irq;
#define IF_SPI_DEVICEID_CTRL_REG_TO_CARD_REV(dc) (dc & 0x000000ff)
/***************** IF_SPI_HOST_INT_CTRL_REG *****************/
-/** Host Interrupt Control bit : Wake up */
+/* Host Interrupt Control bit : Wake up */
#define IF_SPI_HICT_WAKE_UP (1<<0)
-/** Host Interrupt Control bit : WLAN ready */
+/* Host Interrupt Control bit : WLAN ready */
#define IF_SPI_HICT_WLAN_READY (1<<1)
/*#define IF_SPI_HICT_FIFO_FIRST_HALF_EMPTY (1<<2) */
/*#define IF_SPI_HICT_FIFO_SECOND_HALF_EMPTY (1<<3) */
/*#define IF_SPI_HICT_IRQSRC_WLAN (1<<4) */
-/** Host Interrupt Control bit : Tx auto download */
+/* Host Interrupt Control bit : Tx auto download */
#define IF_SPI_HICT_TX_DOWNLOAD_OVER_AUTO (1<<5)
-/** Host Interrupt Control bit : Rx auto upload */
+/* Host Interrupt Control bit : Rx auto upload */
#define IF_SPI_HICT_RX_UPLOAD_OVER_AUTO (1<<6)
-/** Host Interrupt Control bit : Command auto download */
+/* Host Interrupt Control bit : Command auto download */
#define IF_SPI_HICT_CMD_DOWNLOAD_OVER_AUTO (1<<7)
-/** Host Interrupt Control bit : Command auto upload */
+/* Host Interrupt Control bit : Command auto upload */
#define IF_SPI_HICT_CMD_UPLOAD_OVER_AUTO (1<<8)
/***************** IF_SPI_CARD_INT_CAUSE_REG *****************/
-/** Card Interrupt Case bit : Tx download over */
+/* Card Interrupt Case bit : Tx download over */
#define IF_SPI_CIC_TX_DOWNLOAD_OVER (1<<0)
-/** Card Interrupt Case bit : Rx upload over */
+/* Card Interrupt Case bit : Rx upload over */
#define IF_SPI_CIC_RX_UPLOAD_OVER (1<<1)
-/** Card Interrupt Case bit : Command download over */
+/* Card Interrupt Case bit : Command download over */
#define IF_SPI_CIC_CMD_DOWNLOAD_OVER (1<<2)
-/** Card Interrupt Case bit : Host event */
+/* Card Interrupt Case bit : Host event */
#define IF_SPI_CIC_HOST_EVENT (1<<3)
-/** Card Interrupt Case bit : Command upload over */
+/* Card Interrupt Case bit : Command upload over */
#define IF_SPI_CIC_CMD_UPLOAD_OVER (1<<4)
-/** Card Interrupt Case bit : Power down */
+/* Card Interrupt Case bit : Power down */
#define IF_SPI_CIC_POWER_DOWN (1<<5)
/***************** IF_SPI_CARD_INT_STATUS_REG *****************/
#define IF_SPI_HICU_CMD_RD_FIFO_UNDERFLOW (1<<10)
/***************** IF_SPI_HOST_INT_STATUS_REG *****************/
-/** Host Interrupt Status bit : Tx download ready */
+/* Host Interrupt Status bit : Tx download ready */
#define IF_SPI_HIST_TX_DOWNLOAD_RDY (1<<0)
-/** Host Interrupt Status bit : Rx upload ready */
+/* Host Interrupt Status bit : Rx upload ready */
#define IF_SPI_HIST_RX_UPLOAD_RDY (1<<1)
-/** Host Interrupt Status bit : Command download ready */
+/* Host Interrupt Status bit : Command download ready */
#define IF_SPI_HIST_CMD_DOWNLOAD_RDY (1<<2)
-/** Host Interrupt Status bit : Card event */
+/* Host Interrupt Status bit : Card event */
#define IF_SPI_HIST_CARD_EVENT (1<<3)
-/** Host Interrupt Status bit : Command upload ready */
+/* Host Interrupt Status bit : Command upload ready */
#define IF_SPI_HIST_CMD_UPLOAD_RDY (1<<4)
-/** Host Interrupt Status bit : I/O write FIFO overflow */
+/* Host Interrupt Status bit : I/O write FIFO overflow */
#define IF_SPI_HIST_IO_WR_FIFO_OVERFLOW (1<<5)
-/** Host Interrupt Status bit : I/O read FIFO underflow */
+/* Host Interrupt Status bit : I/O read FIFO underflow */
#define IF_SPI_HIST_IO_RD_FIFO_UNDRFLOW (1<<6)
-/** Host Interrupt Status bit : Data write FIFO overflow */
+/* Host Interrupt Status bit : Data write FIFO overflow */
#define IF_SPI_HIST_DATA_WR_FIFO_OVERFLOW (1<<7)
-/** Host Interrupt Status bit : Data read FIFO underflow */
+/* Host Interrupt Status bit : Data read FIFO underflow */
#define IF_SPI_HIST_DATA_RD_FIFO_UNDERFLOW (1<<8)
-/** Host Interrupt Status bit : Command write FIFO overflow */
+/* Host Interrupt Status bit : Command write FIFO overflow */
#define IF_SPI_HIST_CMD_WR_FIFO_OVERFLOW (1<<9)
-/** Host Interrupt Status bit : Command read FIFO underflow */
+/* Host Interrupt Status bit : Command read FIFO underflow */
#define IF_SPI_HIST_CMD_RD_FIFO_UNDERFLOW (1<<10)
/***************** IF_SPI_HOST_INT_STATUS_MASK_REG *****************/
-/** Host Interrupt Status Mask bit : Tx download ready */
+/* Host Interrupt Status Mask bit : Tx download ready */
#define IF_SPI_HISM_TX_DOWNLOAD_RDY (1<<0)
-/** Host Interrupt Status Mask bit : Rx upload ready */
+/* Host Interrupt Status Mask bit : Rx upload ready */
#define IF_SPI_HISM_RX_UPLOAD_RDY (1<<1)
-/** Host Interrupt Status Mask bit : Command download ready */
+/* Host Interrupt Status Mask bit : Command download ready */
#define IF_SPI_HISM_CMD_DOWNLOAD_RDY (1<<2)
-/** Host Interrupt Status Mask bit : Card event */
+/* Host Interrupt Status Mask bit : Card event */
#define IF_SPI_HISM_CARDEVENT (1<<3)
-/** Host Interrupt Status Mask bit : Command upload ready */
+/* Host Interrupt Status Mask bit : Command upload ready */
#define IF_SPI_HISM_CMD_UPLOAD_RDY (1<<4)
-/** Host Interrupt Status Mask bit : I/O write FIFO overflow */
+/* Host Interrupt Status Mask bit : I/O write FIFO overflow */
#define IF_SPI_HISM_IO_WR_FIFO_OVERFLOW (1<<5)
-/** Host Interrupt Status Mask bit : I/O read FIFO underflow */
+/* Host Interrupt Status Mask bit : I/O read FIFO underflow */
#define IF_SPI_HISM_IO_RD_FIFO_UNDERFLOW (1<<6)
-/** Host Interrupt Status Mask bit : Data write FIFO overflow */
+/* Host Interrupt Status Mask bit : Data write FIFO overflow */
#define IF_SPI_HISM_DATA_WR_FIFO_OVERFLOW (1<<7)
-/** Host Interrupt Status Mask bit : Data write FIFO underflow */
+/* Host Interrupt Status Mask bit : Data write FIFO underflow */
#define IF_SPI_HISM_DATA_RD_FIFO_UNDERFLOW (1<<8)
-/** Host Interrupt Status Mask bit : Command write FIFO overflow */
+/* Host Interrupt Status Mask bit : Command write FIFO overflow */
#define IF_SPI_HISM_CMD_WR_FIFO_OVERFLOW (1<<9)
-/** Host Interrupt Status Mask bit : Command write FIFO underflow */
+/* Host Interrupt Status Mask bit : Command write FIFO underflow */
#define IF_SPI_HISM_CMD_RD_FIFO_UNDERFLOW (1<<10)
/***************** IF_SPI_SPU_BUS_MODE_REG *****************/
-/**
- * This file contains functions used in USB interface module.
- */
+/*
+ * This file contains functions used in USB interface module.
+ */
#include <linux/delay.h>
#include <linux/moduleparam.h>
#include <linux/firmware.h>
/* sysfs hooks */
-/**
+/*
* Set function to write firmware to device's persistent memory
*/
static ssize_t if_usb_firmware_set(struct device *dev,
return ret;
}
-/**
+/*
* lbs_flash_fw attribute to be exported per ethX interface through sysfs
* (/sys/class/net/ethX/lbs_flash_fw). Use this like so to write firmware to
* the device's persistent memory:
static DEVICE_ATTR(lbs_flash_fw, 0200, NULL, if_usb_firmware_set);
/**
- * Set function to write firmware to device's persistent memory
+ * if_usb_boot2_set - write firmware to device's persistent memory
+ *
+ * @dev: target device
+ * @attr: device attributes
+ * @buf: firmware buffer to write
+ * @count: number of bytes to write
+ *
+ * returns: number of bytes written or negative error code
*/
static ssize_t if_usb_boot2_set(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
return ret;
}
-/**
+/*
* lbs_flash_boot2 attribute to be exported per ethX interface through sysfs
* (/sys/class/net/ethX/lbs_flash_boot2). Use this like so to write firmware
* to the device's persistent memory:
static DEVICE_ATTR(lbs_flash_boot2, 0200, NULL, if_usb_boot2_set);
/**
- * @brief call back function to handle the status of the URB
- * @param urb pointer to urb structure
- * @return N/A
+ * if_usb_write_bulk_callback - callback function to handle the status
+ * of the URB
+ * @urb: pointer to &urb structure
+ * returns: N/A
*/
static void if_usb_write_bulk_callback(struct urb *urb)
{
}
/**
- * @brief free tx/rx urb, skb and rx buffer
- * @param cardp pointer if_usb_card
- * @return N/A
+ * if_usb_free - free tx/rx urb, skb and rx buffer
+ * @cardp: pointer to &if_usb_card
+ * returns: N/A
*/
static void if_usb_free(struct if_usb_card *cardp)
{
#endif
/**
- * @brief sets the configuration values
- * @param ifnum interface number
- * @param id pointer to usb_device_id
- * @return 0 on success, error code on failure
+ * if_usb_probe - sets the configuration values
+ * @intf: &usb_interface pointer
+ * @id: pointer to usb_device_id
+ * returns: 0 on success, error code on failure
*/
static int if_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
}
/**
- * @brief free resource and cleanup
- * @param intf USB interface structure
- * @return N/A
+ * if_usb_disconnect - free resource and cleanup
+ * @intf: USB interface structure
+ * returns: N/A
*/
static void if_usb_disconnect(struct usb_interface *intf)
{
}
/**
- * @brief This function download FW
- * @param priv pointer to struct lbs_private
- * @return 0
+ * if_usb_send_fw_pkt - download FW
+ * @cardp: pointer to &struct if_usb_card
+ * returns: 0
*/
static int if_usb_send_fw_pkt(struct if_usb_card *cardp)
{
}
/**
- * @brief This function transfer the data to the device.
- * @param priv pointer to struct lbs_private
- * @param payload pointer to payload data
- * @param nb data length
- * @return 0 or -1
+ * usb_tx_block - transfer the data to the device
+ * @cardp: pointer to &struct if_usb_card
+ * @payload: pointer to payload data
+ * @nb: data length
+ * returns: 0 for success or negative error code
*/
static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload, uint16_t nb)
{
}
/**
- * @brief This function reads of the packet into the upload buff,
- * wake up the main thread and initialise the Rx callack.
+ * if_usb_receive - read the packet into the upload buffer,
+ * wake up the main thread and initialise the Rx callack
*
- * @param urb pointer to struct urb
- * @return N/A
+ * @urb: pointer to &struct urb
+ * returns: N/A
*/
static void if_usb_receive(struct urb *urb)
{
}
/**
- * @brief This function downloads data to FW
- * @param priv pointer to struct lbs_private structure
- * @param type type of data
- * @param buf pointer to data buffer
- * @param len number of bytes
- * @return 0 or -1
+ * if_usb_host_to_card - downloads data to FW
+ * @priv: pointer to &struct lbs_private structure
+ * @type: type of data
+ * @payload: pointer to data buffer
+ * @nb: number of bytes
+ * returns: 0 for success or negative error code
*/
static int if_usb_host_to_card(struct lbs_private *priv, uint8_t type,
uint8_t *payload, uint16_t nb)
}
/**
- * @brief This function issues Boot command to the Boot2 code
- * @param ivalue 1:Boot from FW by USB-Download
- * 2:Boot from FW in EEPROM
- * @return 0
+ * if_usb_issue_boot_command - issues Boot command to the Boot2 code
+ * @cardp: pointer to &if_usb_card
+ * @ivalue: 1:Boot from FW by USB-Download
+ * 2:Boot from FW in EEPROM
+ * returns: 0 for success or negative error code
*/
static int if_usb_issue_boot_command(struct if_usb_card *cardp, int ivalue)
{
/**
- * @brief This function checks the validity of Boot2/FW image.
+ * check_fwfile_format - check the validity of Boot2/FW image
*
- * @param data pointer to image
- * len image length
- * @return 0 or -1
+ * @data: pointer to image
+ * @totlen: image length
+ * returns: 0 (good) or 1 (failure)
*/
static int check_fwfile_format(const uint8_t *data, uint32_t totlen)
{
/**
-* @brief This function programs the firmware subject to cmd
+* if_usb_prog_firmware - programs the firmware subject to cmd
*
-* @param cardp the if_usb_card descriptor
-* fwname firmware or boot2 image file name
-* cmd either BOOT_CMD_FW_BY_USB, BOOT_CMD_UPDATE_FW,
-* or BOOT_CMD_UPDATE_BOOT2.
-* @return 0 or error code
+* @cardp: the if_usb_card descriptor
+* @fwname: firmware or boot2 image file name
+* @cmd: either BOOT_CMD_FW_BY_USB, BOOT_CMD_UPDATE_FW,
+* or BOOT_CMD_UPDATE_BOOT2.
+* returns: 0 or error code
*/
static int if_usb_prog_firmware(struct if_usb_card *cardp,
const char *fwname, int cmd)
struct lbs_private;
-/**
- * This file contains definition for USB interface.
- */
+/*
+ * This file contains definition for USB interface.
+ */
#define CMD_TYPE_REQUEST 0xF00DFACE
#define CMD_TYPE_DATA 0xBEADC0DE
#define CMD_TYPE_INDICATION 0xBEEFFACE
uint8_t pad[2];
};
-/** USB card description structure*/
+/* USB card description structure*/
struct if_usb_card {
struct usb_device *udev;
uint32_t model; /* MODEL_* */
__le16 boot2_version;
};
-/** fwheader */
+/* fwheader */
struct fwheader {
__le32 dnldcmd;
__le32 baseaddr;
};
#define FW_MAX_DATA_BLK_SIZE 600
-/** FWData */
+/* FWData */
struct fwdata {
struct fwheader hdr;
__le32 seqnum;
uint8_t data[0];
};
-/** fwsyncheader */
+/* fwsyncheader */
struct fwsyncheader {
__le32 cmd;
__le32 seqnum;
-/**
- * This file contains the major functions in WLAN
- * driver. It includes init, exit, open, close and main
- * thread etc..
- */
+/*
+ * This file contains the major functions in WLAN
+ * driver. It includes init, exit, open, close and main
+ * thread etc..
+ */
#include <linux/moduleparam.h>
#include <linux/delay.h>
module_param_named(libertas_debug, lbs_debug, int, 0644);
-/* This global structure is used to send the confirm_sleep command as
- * fast as possible down to the firmware. */
+/*
+ * This global structure is used to send the confirm_sleep command as
+ * fast as possible down to the firmware.
+ */
struct cmd_confirm_sleep confirm_sleep;
-/**
+/*
* the table to keep region code
*/
u16 lbs_region_code_to_index[MRVDRV_MAX_REGION_CODE] =
{ 0x10, 0x20, 0x30, 0x31, 0x32, 0x40 };
-/**
+/*
* FW rate table. FW refers to rates by their index in this table, not by the
* rate value itself. Values of 0x00 are
* reserved positions.
};
/**
- * @brief use index to get the data rate
+ * lbs_fw_index_to_data_rate - use index to get the data rate
*
- * @param idx The index of data rate
- * @return data rate or 0
+ * @idx: The index of data rate
+ * returns: data rate or 0
*/
u32 lbs_fw_index_to_data_rate(u8 idx)
{
}
/**
- * @brief use rate to get the index
+ * lbs_data_rate_to_fw_index - use rate to get the index
*
- * @param rate data rate
- * @return index or 0
+ * @rate: data rate
+ * returns: index or 0
*/
u8 lbs_data_rate_to_fw_index(u32 rate)
{
/**
- * @brief This function opens the ethX interface
+ * lbs_dev_open - open the ethX interface
*
- * @param dev A pointer to net_device structure
- * @return 0 or -EBUSY if monitor mode active
+ * @dev: A pointer to &net_device structure
+ * returns: 0 or -EBUSY if monitor mode active
*/
static int lbs_dev_open(struct net_device *dev)
{
}
/**
- * @brief This function closes the ethX interface
+ * lbs_eth_stop - close the ethX interface
*
- * @param dev A pointer to net_device structure
- * @return 0
+ * @dev: A pointer to &net_device structure
+ * returns: 0
*/
static int lbs_eth_stop(struct net_device *dev)
{
}
/**
- * @brief This function handles the major jobs in the LBS driver.
+ * lbs_thread - handles the major jobs in the LBS driver.
* It handles all events generated by firmware, RX data received
* from firmware and TX data sent from kernel.
*
- * @param data A pointer to lbs_thread structure
- * @return 0
+ * @data: A pointer to &lbs_thread structure
+ * returns: 0
*/
static int lbs_thread(void *data)
{
}
/**
- * @brief This function gets the HW spec from the firmware and sets
- * some basic parameters.
+ * lbs_setup_firmware - gets the HW spec from the firmware and sets
+ * some basic parameters
*
- * @param priv A pointer to struct lbs_private structure
- * @return 0 or -1
+ * @priv: A pointer to &struct lbs_private structure
+ * returns: 0 or -1
*/
static int lbs_setup_firmware(struct lbs_private *priv)
{
EXPORT_SYMBOL_GPL(lbs_resume);
/**
- * This function handles the timeout of command sending.
- * It will re-send the same command again.
+ * lbs_cmd_timeout_handler - handles the timeout of command sending.
+ * It will re-send the same command again.
+ *
+ * @data: &struct lbs_private pointer
*/
static void lbs_cmd_timeout_handler(unsigned long data)
{
}
/**
- * This function put the device back to deep sleep mode when timer expires
- * and no activity (command, event, data etc.) is detected.
+ * auto_deepsleep_timer_fn - put the device back to deep sleep mode when
+ * timer expires and no activity (command, event, data etc.) is detected.
+ * @data: &struct lbs_private pointer
+ * returns: N/A
*/
static void auto_deepsleep_timer_fn(unsigned long data)
{
};
/**
- * @brief This function adds the card. it will probe the
+ * lbs_add_card - adds the card. It will probe the
* card, allocate the lbs_priv and initialize the device.
*
- * @param card A pointer to card
- * @return A pointer to struct lbs_private structure
+ * @card: A pointer to card
+ * @dmdev: A pointer to &struct device
+ * returns: A pointer to &struct lbs_private structure
*/
struct lbs_private *lbs_add_card(void *card, struct device *dmdev)
{
EXPORT_SYMBOL_GPL(lbs_notify_command_response);
/**
- * @brief Retrieves two-stage firmware
+ * lbs_get_firmware - Retrieves two-stage firmware
*
- * @param dev A pointer to device structure
- * @param user_helper User-defined helper firmware file
- * @param user_mainfw User-defined main firmware file
- * @param card_model Bus-specific card model ID used to filter firmware table
- * elements
- * @param fw_table Table of firmware file names and device model numbers
- * terminated by an entry with a NULL helper name
- * @param helper On success, the helper firmware; caller must free
- * @param mainfw On success, the main firmware; caller must free
+ * @dev: A pointer to &device structure
+ * @user_helper: User-defined helper firmware file
+ * @user_mainfw: User-defined main firmware file
+ * @card_model: Bus-specific card model ID used to filter firmware table
+ * elements
+ * @fw_table: Table of firmware file names and device model numbers
+ * terminated by an entry with a NULL helper name
+ * @helper: On success, the helper firmware; caller must free
+ * @mainfw: On success, the main firmware; caller must free
*
- * @return 0 on success, non-zero on failure
+ * returns: 0 on success, non-zero on failure
*/
int lbs_get_firmware(struct device *dev, const char *user_helper,
const char *user_mainfw, u32 card_model,
* Mesh sysfs support
*/
-/**
+/*
* Attributes exported through sysfs
*/
/**
- * @brief Get function for sysfs attribute anycast_mask
+ * lbs_anycast_get - Get function for sysfs attribute anycast_mask
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer where data will be returned
*/
static ssize_t lbs_anycast_get(struct device *dev,
struct device_attribute *attr, char * buf)
}
/**
- * @brief Set function for sysfs attribute anycast_mask
+ * lbs_anycast_set - Set function for sysfs attribute anycast_mask
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer that contains new attribute value
+ * @count: size of buffer
*/
static ssize_t lbs_anycast_set(struct device *dev,
struct device_attribute *attr, const char * buf, size_t count)
}
/**
- * @brief Get function for sysfs attribute prb_rsp_limit
+ * lbs_prb_rsp_limit_get - Get function for sysfs attribute prb_rsp_limit
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer where data will be returned
*/
static ssize_t lbs_prb_rsp_limit_get(struct device *dev,
struct device_attribute *attr, char *buf)
}
/**
- * @brief Set function for sysfs attribute prb_rsp_limit
+ * lbs_prb_rsp_limit_set - Set function for sysfs attribute prb_rsp_limit
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer that contains new attribute value
+ * @count: size of buffer
*/
static ssize_t lbs_prb_rsp_limit_set(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
}
/**
- * Get function for sysfs attribute mesh
+ * lbs_mesh_get - Get function for sysfs attribute mesh
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer where data will be returned
*/
static ssize_t lbs_mesh_get(struct device *dev,
struct device_attribute *attr, char * buf)
}
/**
- * Set function for sysfs attribute mesh
+ * lbs_mesh_set - Set function for sysfs attribute mesh
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer that contains new attribute value
+ * @count: size of buffer
*/
static ssize_t lbs_mesh_set(struct device *dev,
struct device_attribute *attr, const char * buf, size_t count)
return count;
}
-/**
+/*
* lbs_mesh attribute to be exported per ethX interface
* through sysfs (/sys/class/net/ethX/lbs_mesh)
*/
static DEVICE_ATTR(lbs_mesh, 0644, lbs_mesh_get, lbs_mesh_set);
-/**
+/*
* anycast_mask attribute to be exported per mshX interface
* through sysfs (/sys/class/net/mshX/anycast_mask)
*/
static DEVICE_ATTR(anycast_mask, 0644, lbs_anycast_get, lbs_anycast_set);
-/**
+/*
* prb_rsp_limit attribute to be exported per mshX interface
* through sysfs (/sys/class/net/mshX/prb_rsp_limit)
*/
/**
- * @brief This function closes the mshX interface
+ * lbs_mesh_stop - close the mshX interface
*
- * @param dev A pointer to net_device structure
- * @return 0
+ * @dev: A pointer to &net_device structure
+ * returns: 0
*/
static int lbs_mesh_stop(struct net_device *dev)
{
}
/**
- * @brief This function opens the mshX interface
+ * lbs_mesh_dev_open - open the mshX interface
*
- * @param dev A pointer to net_device structure
- * @return 0 or -EBUSY if monitor mode active
+ * @dev: A pointer to &net_device structure
+ * returns: 0 or -EBUSY if monitor mode active
*/
static int lbs_mesh_dev_open(struct net_device *dev)
{
};
/**
- * @brief This function adds mshX interface
+ * lbs_add_mesh - add mshX interface
*
- * @param priv A pointer to the struct lbs_private structure
- * @return 0 if successful, -X otherwise
+ * @priv: A pointer to the &struct lbs_private structure
+ * returns: 0 if successful, -X otherwise
*/
int lbs_add_mesh(struct lbs_private *priv)
{
*/
/**
- * @brief Add or delete Mesh Blinding Table entries
+ * lbs_mesh_bt_add_del - Add or delete Mesh Blinding Table entries
*
- * @param priv A pointer to struct lbs_private structure
- * @param add TRUE to add the entry, FALSE to delete it
- * @param addr1 Destination address to blind or unblind
+ * @priv: A pointer to &struct lbs_private structure
+ * @add: TRUE to add the entry, FALSE to delete it
+ * @addr1: Destination address to blind or unblind
*
- * @return 0 on success, error on failure
+ * returns: 0 on success, error on failure
*/
int lbs_mesh_bt_add_del(struct lbs_private *priv, bool add, u8 *addr1)
{
}
/**
- * @brief Reset/clear the mesh blinding table
+ * lbs_mesh_bt_reset - Reset/clear the mesh blinding table
*
- * @param priv A pointer to struct lbs_private structure
+ * @priv: A pointer to &struct lbs_private structure
*
- * @return 0 on success, error on failure
+ * returns: 0 on success, error on failure
*/
int lbs_mesh_bt_reset(struct lbs_private *priv)
{
}
/**
- * @brief Gets the inverted status of the mesh blinding table
+ * lbs_mesh_bt_get_inverted - Gets the inverted status of the mesh
+ * blinding table
*
- * Normally the firmware "blinds" or ignores traffic from mesh nodes in the
- * table, but an inverted table allows *only* traffic from nodes listed in
- * the table.
+ * Normally the firmware "blinds" or ignores traffic from mesh nodes in the
+ * table, but an inverted table allows *only* traffic from nodes listed in
+ * the table.
*
- * @param priv A pointer to struct lbs_private structure
- * @param invert On success, TRUE if the blinding table is inverted,
- * FALSE if it is not inverted
+ * @priv: A pointer to &struct lbs_private structure
+ * @inverted: On success, TRUE if the blinding table is inverted,
+ * FALSE if it is not inverted
*
- * @return 0 on success, error on failure
+ * returns: 0 on success, error on failure
*/
int lbs_mesh_bt_get_inverted(struct lbs_private *priv, bool *inverted)
{
}
/**
- * @brief Sets the inverted status of the mesh blinding table
+ * lbs_mesh_bt_set_inverted - Sets the inverted status of the mesh
+ * blinding table
*
- * Normally the firmware "blinds" or ignores traffic from mesh nodes in the
- * table, but an inverted table allows *only* traffic from nodes listed in
- * the table.
+ * Normally the firmware "blinds" or ignores traffic from mesh nodes in the
+ * table, but an inverted table allows *only* traffic from nodes listed in
+ * the table.
*
- * @param priv A pointer to struct lbs_private structure
- * @param invert TRUE to invert the blinding table (only traffic from
- * listed nodes allowed), FALSE to return it
- * to normal state (listed nodes ignored)
+ * @priv: A pointer to &struct lbs_private structure
+ * @inverted: TRUE to invert the blinding table (only traffic from
+ * listed nodes allowed), FALSE to return it
+ * to normal state (listed nodes ignored)
*
- * @return 0 on success, error on failure
+ * returns: 0 on success, error on failure
*/
int lbs_mesh_bt_set_inverted(struct lbs_private *priv, bool inverted)
{
}
/**
- * @brief List an entry in the mesh blinding table
+ * lbs_mesh_bt_get_entry - List an entry in the mesh blinding table
*
- * @param priv A pointer to struct lbs_private structure
- * @param id The ID of the entry to list
- * @param addr1 MAC address associated with the table entry
+ * @priv: A pointer to &struct lbs_private structure
+ * @id: The ID of the entry to list
+ * @addr1: MAC address associated with the table entry
*
- * @return 0 on success, error on failure
+ * returns: 0 on success, error on failure
*/
int lbs_mesh_bt_get_entry(struct lbs_private *priv, u32 id, u8 *addr1)
{
}
/**
- * @brief Access the mesh forwarding table
+ * lbs_cmd_fwt_access - Access the mesh forwarding table
*
- * @param priv A pointer to struct lbs_private structure
- * @param cmd_action The forwarding table action to perform
- * @param cmd The pre-filled FWT_ACCESS command
+ * @priv: A pointer to &struct lbs_private structure
+ * @cmd_action: The forwarding table action to perform
+ * @cmd: The pre-filled FWT_ACCESS command
*
- * @return 0 on success and 'cmd' will be filled with the
- * firmware's response
+ * returns: 0 on success and 'cmd' will be filled with the
+ * firmware's response
*/
int lbs_cmd_fwt_access(struct lbs_private *priv, u16 cmd_action,
struct cmd_ds_fwt_access *cmd)
}
/**
- * @brief Get function for sysfs attribute bootflag
+ * bootflag_get - Get function for sysfs attribute bootflag
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer where data will be returned
*/
static ssize_t bootflag_get(struct device *dev,
struct device_attribute *attr, char *buf)
}
/**
- * @brief Set function for sysfs attribute bootflag
+ * bootflag_set - Set function for sysfs attribute bootflag
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer that contains new attribute value
+ * @count: size of buffer
*/
static ssize_t bootflag_set(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
}
/**
- * @brief Get function for sysfs attribute boottime
+ * boottime_get - Get function for sysfs attribute boottime
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer where data will be returned
*/
static ssize_t boottime_get(struct device *dev,
struct device_attribute *attr, char *buf)
}
/**
- * @brief Set function for sysfs attribute boottime
+ * boottime_set - Set function for sysfs attribute boottime
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer that contains new attribute value
+ * @count: size of buffer
*/
static ssize_t boottime_set(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
}
/**
- * @brief Get function for sysfs attribute channel
+ * channel_get - Get function for sysfs attribute channel
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer where data will be returned
*/
static ssize_t channel_get(struct device *dev,
struct device_attribute *attr, char *buf)
}
/**
- * @brief Set function for sysfs attribute channel
+ * channel_set - Set function for sysfs attribute channel
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer that contains new attribute value
+ * @count: size of buffer
*/
static ssize_t channel_set(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
}
/**
- * @brief Get function for sysfs attribute mesh_id
+ * mesh_id_get - Get function for sysfs attribute mesh_id
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer where data will be returned
*/
static ssize_t mesh_id_get(struct device *dev, struct device_attribute *attr,
char *buf)
}
/**
- * @brief Set function for sysfs attribute mesh_id
+ * mesh_id_set - Set function for sysfs attribute mesh_id
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer that contains new attribute value
+ * @count: size of buffer
*/
static ssize_t mesh_id_set(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
}
/**
- * @brief Get function for sysfs attribute protocol_id
+ * protocol_id_get - Get function for sysfs attribute protocol_id
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer where data will be returned
*/
static ssize_t protocol_id_get(struct device *dev,
struct device_attribute *attr, char *buf)
}
/**
- * @brief Set function for sysfs attribute protocol_id
+ * protocol_id_set - Set function for sysfs attribute protocol_id
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer that contains new attribute value
+ * @count: size of buffer
*/
static ssize_t protocol_id_set(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
}
/**
- * @brief Get function for sysfs attribute metric_id
+ * metric_id_get - Get function for sysfs attribute metric_id
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer where data will be returned
*/
static ssize_t metric_id_get(struct device *dev,
struct device_attribute *attr, char *buf)
}
/**
- * @brief Set function for sysfs attribute metric_id
+ * metric_id_set - Set function for sysfs attribute metric_id
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer that contains new attribute value
+ * @count: size of buffer
*/
static ssize_t metric_id_set(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
}
/**
- * @brief Get function for sysfs attribute capability
+ * capability_get - Get function for sysfs attribute capability
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer where data will be returned
*/
static ssize_t capability_get(struct device *dev,
struct device_attribute *attr, char *buf)
}
/**
- * @brief Set function for sysfs attribute capability
+ * capability_set - Set function for sysfs attribute capability
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer that contains new attribute value
+ * @count: size of buffer
*/
static ssize_t capability_set(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
-/**
- * Contains all definitions needed for the Libertas' MESH implementation.
- */
+/*
+ * Contains all definitions needed for the Libertas' MESH implementation.
+ */
#ifndef _LBS_MESH_H_
#define _LBS_MESH_H_
-/**
- * This file contains the handling of RX in wlan driver.
- */
+/*
+ * This file contains the handling of RX in wlan driver.
+ */
#include <linux/etherdevice.h>
#include <linux/slab.h>
#include <linux/types.h>
struct sk_buff *skb);
/**
- * @brief This function processes received packet and forwards it
- * to kernel/upper layer
+ * lbs_process_rxed_packet - processes received packet and forwards it
+ * to kernel/upper layer
*
- * @param priv A pointer to struct lbs_private
- * @param skb A pointer to skb which includes the received packet
- * @return 0 or -1
+ * @priv: A pointer to &struct lbs_private
+ * @skb: A pointer to skb which includes the received packet
+ * returns: 0 or -1
*/
int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *skb)
{
EXPORT_SYMBOL_GPL(lbs_process_rxed_packet);
/**
- * @brief This function converts Tx/Rx rates from the Marvell WLAN format
- * (see Table 2 in Section 3.1) to IEEE80211_RADIOTAP_RATE units (500 Kb/s)
+ * convert_mv_rate_to_radiotap - converts Tx/Rx rates from Marvell WLAN format
+ * (see Table 2 in Section 3.1) to IEEE80211_RADIOTAP_RATE units (500 Kb/s)
*
- * @param rate Input rate
- * @return Output Rate (0 if invalid)
+ * @rate: Input rate
+ * returns: Output Rate (0 if invalid)
*/
static u8 convert_mv_rate_to_radiotap(u8 rate)
{
}
/**
- * @brief This function processes a received 802.11 packet and forwards it
- * to kernel/upper layer
+ * process_rxed_802_11_packet - processes a received 802.11 packet and forwards
+ * it to kernel/upper layer
*
- * @param priv A pointer to struct lbs_private
- * @param skb A pointer to skb which includes the received packet
- * @return 0 or -1
+ * @priv: A pointer to &struct lbs_private
+ * @skb: A pointer to skb which includes the received packet
+ * returns: 0 or -1
*/
static int process_rxed_802_11_packet(struct lbs_private *priv,
struct sk_buff *skb)
-/**
- * This file contains the handling of TX in wlan driver.
- */
+/*
+ * This file contains the handling of TX in wlan driver.
+ */
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/sched.h>
#include "dev.h"
/**
- * @brief This function converts Tx/Rx rates from IEEE80211_RADIOTAP_RATE
- * units (500 Kb/s) into Marvell WLAN format (see Table 8 in Section 3.2.1)
+ * convert_radiotap_rate_to_mv - converts Tx/Rx rates from IEEE80211_RADIOTAP_RATE
+ * units (500 Kb/s) into Marvell WLAN format (see Table 8 in Section 3.2.1)
*
- * @param rate Input rate
- * @return Output Rate (0 if invalid)
+ * @rate: Input rate
+ * returns: Output Rate (0 if invalid)
*/
static u32 convert_radiotap_rate_to_mv(u8 rate)
{
}
/**
- * @brief This function checks the conditions and sends packet to IF
- * layer if everything is ok.
+ * lbs_hard_start_xmit - checks the conditions and sends packet to IF
+ * layer if everything is ok
*
- * @param priv A pointer to struct lbs_private structure
- * @param skb A pointer to skb which includes TX packet
- * @return 0 or -1
+ * @skb: A pointer to skb which includes TX packet
+ * @dev: A pointer to the &struct net_device
+ * returns: 0 or -1
*/
netdev_tx_t lbs_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
}
/**
- * @brief This function sends to the host the last transmitted packet,
- * filling the radiotap headers with transmission information.
+ * lbs_send_tx_feedback - sends to the host the last transmitted packet,
+ * filling the radiotap headers with transmission information.
*
- * @param priv A pointer to struct lbs_private structure
- * @param status A 32 bit value containing transmission status.
+ * @priv: A pointer to &struct lbs_private structure
+ * @try_count: A 32-bit value containing transmission retry status.
*
- * @returns void
+ * returns: void
*/
void lbs_send_tx_feedback(struct lbs_private *priv, u32 try_count)
{
-/**
- * This header file contains definition for global types
- */
+/*
+ * This header file contains definition for global types
+ */
#ifndef _LBS_TYPES_H_
#define _LBS_TYPES_H_
struct ieee_ie_ds_param_set ds;
} __packed;
-/** TLV type ID definition */
+/* TLV type ID definition */
#define PROPRIETARY_TLV_BASE_ID 0x0100
/* Terminating TLV type */
#define TLV_TYPE_MESH_ID (PROPRIETARY_TLV_BASE_ID + 37)
#define TLV_TYPE_OLD_MESH_ID (PROPRIETARY_TLV_BASE_ID + 291)
-/** TLV related data structures*/
+/* TLV related data structures */
struct mrvl_ie_header {
__le16 type;
__le16 len;
__le16 auth;
} __packed;
-/** Local Power capability */
+/* Local Power capability */
struct mrvl_ie_power_capability {
struct mrvl_ie_header header;
s8 minpower;
struct led_bhv ledbhv[1];
} __packed;
-/* Meant to be packed as the value member of a struct ieee80211_info_element.
+/*
+ * Meant to be packed as the value member of a struct ieee80211_info_element.
* Note that the len member of the ieee80211_info_element varies depending on
- * the mesh_id_len */
+ * the mesh_id_len
+ */
struct mrvl_meshie_val {
uint8_t oui[3];
uint8_t type;
projects / openwrt / staging / blogic.git / commitdiff