--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9557.dtsi"
+
+/ {
+ compatible = "avm,fritz1750e", "qca,qca9557";
+ model = "AVM FRITZ!WLAN Repeater 1750E";
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ led_spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <0>;
+
+ spi_gpio: led_gpio@0 {
+ compatible = "fairchild,74hc595";
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ registers-number = <1>;
+ spi-max-frequency = <10000000>;
+
+ gpio_latch_bit {
+ gpio-hog;
+ gpios = <7 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "gpio-latch-bit";
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "fritz1750e:green:power";
+ gpios = <&spi_gpio 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan {
+ label = "fritz1750e:green:wlan";
+ gpios = <&spi_gpio 5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ lan {
+ label = "fritz1750e:green:lan";
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ rssi0 {
+ label = "fritz1750e:green:rssi0";
+ gpios = <&spi_gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ rssi1 {
+ label = "fritz1750e:green:rssi1";
+ gpios = <&spi_gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ rssi2 {
+ label = "fritz1750e:green:rssi2";
+ gpios = <&spi_gpio 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ rssi3 {
+ label = "fritz1750e:green:rssi3";
+ gpios = <&spi_gpio 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ rssi4 {
+ label = "fritz1750e:green:rssi4";
+ gpios = <&spi_gpio 4 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&uart {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "urlader";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "avm,eva-firmware";
+ label = "firmware";
+ reg = <0x20000 0xee0000>;
+ };
+
+ partition@f00000 {
+ label = "tffs (1)";
+ reg = <0xf00000 0x80000>;
+ read-only;
+ };
+
+ partition@f80000 {
+ label = "tffs (2)";
+ reg = <0xf80000 0x80000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&gpio {
+ reset-pcie-ep {
+ gpio-hog;
+ gpios = <17 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PCIE EP reset";
+ };
+
+ reset-pcie {
+ gpio-hog;
+ gpios = <18 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PCIE Bus reset";
+ };
+};
+
+&wmac {
+ status = "okay";
+ qca,no-eeprom;
+};
+
+ð1 {
+ status = "okay";
+
+ phy-handle = <&phy0>;
+ pll-data = <0x3000000 0x101 0x1313>;
+
+ gmac-config {
+ device = <&gmac>;
+ ge0-sgmii = <0>;
+ };
+};
+
+&mdio1 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+};
alfa-network,ap121f)
ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
;;
+avm,fritz1750e)
+ ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
+ ucidef_set_rssimon "wlan1" "200000" "1"
+ ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:green:rssi0" "wlan1" "1" "100"
+ ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:green:rssi1" "wlan1" "20" "100"
+ ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$boardname:green:rssi2" "wlan1" "40" "100"
+ ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssi3" "wlan1" "60" "100"
+ ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssi4" "wlan1" "80" "100"
+ ;;
avm,fritz300e)
ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
ucidef_set_rssimon "wlan0" "200000" "1"
endef
TARGET_DEVICES += aruba_ap-105
-define Device/avm_fritz300e
- SOC := ar7242
+define Device/avm
DEVICE_VENDOR := AVM
- DEVICE_MODEL := FRITZ!WLAN Repeater 300E
KERNEL := kernel-bin | append-dtb | lzma | eva-image
KERNEL_INITRAMFS := $$(KERNEL)
- IMAGE_SIZE := 15232k
IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \
append-squashfs-fakeroot-be | pad-to 256 | append-rootfs | pad-rootfs | \
append-metadata | check-size
- DEVICE_PACKAGES := fritz-tffs rssileds -swconfig
+ DEVICE_PACKAGES := fritz-tffs
+endef
+
+define Device/avm_fritz1750e
+ $(Device/avm)
+ SOC := qca9556
+ IMAGE_SIZE := 15232k
+ DEVICE_MODEL := FRITZ!WLAN Repeater 1750E
+ DEVICE_PACKAGES += rssileds kmod-ath10k-ct-smallbuffers | \
+ ath10k-firmware-qca988x-ct -swconfig
+endef
+TARGET_DEVICES += avm_fritz1750e
+
+define Device/avm_fritz300e
+ $(Device/avm)
+ SOC := ar7242
+ IMAGE_SIZE := 15232k
+ DEVICE_MODEL := FRITZ!WLAN Repeater 300E
+ DEVICE_PACKAGES += rssileds -swconfig
SUPPORTED_DEVICES += fritz300e
endef
TARGET_DEVICES += avm_fritz300e
define Device/avm_fritz4020
+ $(Device/avm)
SOC := qca9561
- DEVICE_VENDOR := AVM
- DEVICE_MODEL := FRITZ!Box 4020
IMAGE_SIZE := 15232k
- KERNEL := kernel-bin | append-dtb | lzma | eva-image
- KERNEL_INITRAMFS := $$(KERNEL)
- IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \
- append-squashfs-fakeroot-be | pad-to 256 | append-rootfs | pad-rootfs | \
- append-metadata | check-size
- DEVICE_PACKAGES := fritz-tffs
+ DEVICE_MODEL := FRITZ!Box 4020
SUPPORTED_DEVICES += fritz4020
endef
TARGET_DEVICES += avm_fritz4020
projects / openwrt / staging / adrian.git / commitdiff