dt-bindings: pinctrl: Update pinctrl-ingenic for JZ4725B and GPIO merge

The pinctrl-ingenic driver now supports the JZ4725B SoC.

Furthermore, the gpio-ingenic driver was dropped and the pinctrl-ingenic
driver is now responsible for providing the GPIO functionality.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt b/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt
deleted file mode 100644 (file)
index 7988aeb..0000000
--- a/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Ingenic jz47xx GPIO controller
-
-That the Ingenic GPIO driver node must be a sub-node of the Ingenic pinctrl
-driver node.
-
-Required properties:
---------------------
-
- - compatible: Must contain one of:
-    - "ingenic,jz4740-gpio"
-    - "ingenic,jz4770-gpio"
-    - "ingenic,jz4780-gpio"
- - reg: The GPIO bank number.
- - interrupt-controller: Marks the device node as an interrupt controller.
- - interrupts: Interrupt specifier for the controllers interrupt.
- - #interrupt-cells: Should be 2. Refer to
-   ../interrupt-controller/interrupts.txt for more details.
- - gpio-controller: Marks the device node as a GPIO controller.
- - #gpio-cells: Should be 2. The first cell is the GPIO number and the second
-    cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
-    GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
- - gpio-ranges: Range of pins managed by the GPIO controller. Refer to
-   'gpio.txt' in this directory for more details.
-
-Example:
---------
-
-&pinctrl {
-       #address-cells = <1>;
-       #size-cells = <0>;
-
-       gpa: gpio@0 {
-               compatible = "ingenic,jz4740-gpio";
-               reg = <0>;
-
-               gpio-controller;
-               gpio-ranges = <&pinctrl 0 0 32>;
-               #gpio-cells = <2>;
-
-               interrupt-controller;
-               #interrupt-cells = <2>;
-
-               interrupt-parent = <&intc>;
-               interrupts = <28>;
-       };
-};

diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
index ca313a7aeaff67837d551e77b04edaabbfbf1ac7..af20b0ec715c8cd32260fc193b9047f266cc307e 100644 (file)
--- a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
@@ -20,16 +20,30 @@ Required properties:
 
  - compatible: One of:
     - "ingenic,jz4740-pinctrl"
+    - "ingenic,jz4725b-pinctrl"
     - "ingenic,jz4770-pinctrl"
     - "ingenic,jz4780-pinctrl"
  - reg: Address range of the pinctrl registers.
 
 
-GPIO sub-nodes
---------------
+Required properties for sub-nodes (GPIO chips):
+-----------------------------------------------
 
-The pinctrl node can have optional sub-nodes for the Ingenic GPIO driver;
-please refer to ../gpio/ingenic,gpio.txt.
+ - compatible: Must contain one of:
+    - "ingenic,jz4740-gpio"
+    - "ingenic,jz4770-gpio"
+    - "ingenic,jz4780-gpio"
+ - reg: The GPIO bank number.
+ - interrupt-controller: Marks the device node as an interrupt controller.
+ - interrupts: Interrupt specifier for the controllers interrupt.
+ - #interrupt-cells: Should be 2. Refer to
+   ../interrupt-controller/interrupts.txt for more details.
+ - gpio-controller: Marks the device node as a GPIO controller.
+ - #gpio-cells: Should be 2. The first cell is the GPIO number and the second
+    cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
+    GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
+ - gpio-ranges: Range of pins managed by the GPIO controller. Refer to
+   ../gpio/gpio.txt for more details.
 
 
 Example:
@@ -38,4 +52,21 @@ Example:
 pinctrl: pin-controller@10010000 {
        compatible = "ingenic,jz4740-pinctrl";
        reg = <0x10010000 0x400>;
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       gpa: gpio@0 {
+               compatible = "ingenic,jz4740-gpio";
+               reg = <0>;
+
+               gpio-controller;
+               gpio-ranges = <&pinctrl 0 0 32>;
+               #gpio-cells = <2>;
+
+               interrupt-controller;
+               #interrupt-cells = <2>;
+
+               interrupt-parent = <&intc>;
+               interrupts = <28>;
+       };
 };