--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "iodata,wn-dx1200gr", "mediatek,mt7621-soc";
+ model = "I-O DATA WN-DX1200GR";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ label-mac-device = &wan;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "blue:wps";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ repeater {
+ label = "repeater";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u-boot-env";
+ reg = <0x100000 0x100000>;
+ read-only;
+ };
+
+ factory: partition@200000 {
+ label = "factory";
+ reg = <0x200000 0x200000>;
+ };
+
+ partition@400000 {
+ label = "kernel";
+ reg = <0x400000 0x400000>;
+ };
+
+ partition@800000 {
+ label = "ubi";
+ reg = <0x800000 0x2e00000>;
+ };
+
+ partition@3600000 {
+ label = "Config";
+ reg = <0x3600000 0x100000>;
+ read-only;
+ };
+
+ partition@3700000 {
+ label = "firmware_2";
+ reg = <0x3700000 0x3200000>;
+ };
+
+ partition@6900000 {
+ label = "Config_2";
+ reg = <0x6900000 0x100000>;
+ read-only;
+ };
+
+ partition@6a00000 {
+ label = "persist";
+ reg = <0x6a00000 0x100000>;
+ };
+
+ partition@6b00000 {
+ label = "idmkey";
+ reg = <0x6b00000 0x100000>;
+ read-only;
+ };
+
+ partition@6c00000 {
+ label = "Backup";
+ reg = <0x6c00000 0x1380000>;
+ read-only;
+ };
+ };
+};
+
+&gmac0 {
+ mtd-mac-address = <&factory 0x1e000>;
+};
+
+&switch0 {
+ ports {
+ wan: port@0 {
+ status = "okay";
+ label = "wan";
+ mtd-mac-address = <&factory 0x1e006>;
+ };
+
+ port@1 {
+ status = "okay";
+ label = "lan4";
+ };
+
+ port@2 {
+ status = "okay";
+ label = "lan3";
+ };
+
+ port@3 {
+ status = "okay";
+ label = "lan2";
+ };
+
+ port@4 {
+ status = "okay";
+ label = "lan1";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+
+ mediatek,mtd-eeprom = <&factory 0x0>;
+ ieee80211-freq-limit = <2400000 2500000>;
+ };
+};
+
+&pcie1 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "uart2", "uart3", "wdt";
+ function = "gpio";
+ };
+};
+
+&xhci {
+ status = "disabled";
+};
endef
TARGET_DEVICES += iodata_wn-dx1167r
+define Device/iodata_wn-dx1200gr
+ $(Device/iodata_nand)
+ DEVICE_MODEL := WN-DX1200GR
+ KERNEL_INITRAMFS := $(KERNEL_DTB) | loader-kernel | lzma | \
+ uImage lzma -M 0x434f4d43 -n '3.10(XIQ.0)b20' | iodata-mstc-header
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap
+endef
+TARGET_DEVICES += iodata_wn-dx1200gr
+
define Device/iodata_wn-gx300gr
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
# use 1st image in OpenWrt
# - debugflag: enable/disable debug
# users can interrupt Z-Loader for recovering the device if enabled
+#
+# parameters:
+# - $1: the offset of "debugflag"
iodata_mstc_upgrade_prepare() {
local persist_mtd="$(find_mtd_part persist)"
local factory_mtd="$(find_mtd_part factory)"
+ local dflag_offset="$1"
+
+ if [ -z "$dflag_offset" ]; then
+ echo 'no debugflag offset provided'
+ iodata_mstc_prepare_fail
+ fi
if [ -z "$persist_mtd" -o -z "$factory_mtd" ]; then
echo 'cannot find mtd partition(s), "factory" or "persist"'
fi
local bootnum=$(hexdump -s 4 -n 1 -e '"%x"' ${persist_mtd})
- local debugflag=$(hexdump -s 65141 -n 1 -e '"%x"' ${factory_mtd})
+ local debugflag=$(hexdump -s $((dflag_offset)) -n 1 -e '"%x"' ${factory_mtd})
if [ "$bootnum" != "1" -a "$bootnum" != "2" ]; then
echo "failed to get bootnum, please check the value at 0x4 in ${persist_mtd}"
iodata_mstc_prepare_fail
fi
if [ "$debugflag" != "0" -a "$debugflag" != "1" ]; then
- echo "failed to get debugflag, please check the value at 0xFE75 in ${factory_mtd}"
+ echo "failed to get debugflag, please check the value at ${dflag_offset} in ${factory_mtd}"
iodata_mstc_prepare_fail
fi
echo "current: bootnum => ${bootnum}, debugflag => ${debugflag}"
echo "### switch to 1st os-image on next boot ###"
fi
if [ "$debugflag" = "0" ]; then
- if ! (echo -ne "\x01" | dd bs=1 count=1 seek=65141 conv=notrunc of=${factory_mtd} 2>/dev/null); then
+ if ! (echo -ne "\x01" | dd bs=1 count=1 seek=$((dflag_offset)) conv=notrunc of=${factory_mtd} 2>/dev/null); then
echo "failed to set debugflag"
iodata_mstc_prepare_fail
fi
projects / openwrt / staging / xback.git / commitdiff