a few more dts files (WIP)

SVN-Revision: 34130

diff --git a/target/linux/lantiq/image/ARV7525PW.dts b/target/linux/lantiq/image/ARV7525PW.dts
index 1d47927c2060796fd149f07ce6dfc93976d1445e..080ed8e877878cb06bb42b8c450b1bae295ca439 100644 (file)
--- a/target/linux/lantiq/image/ARV7525PW.dts
+++ b/target/linux/lantiq/image/ARV7525PW.dts
@@ -76,6 +76,7 @@
                        interrupt-parent = <&icu0>;
                        interrupts = <63 96>;
                };
+
                etop@E180000 {
                        compatible = "lantiq,etop-xway";
                        reg = <0xE180000 0x40000>;
@@ -91,34 +92,12 @@
                        interrupt-map = <
                                 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 29
                        >;
-                       gpios-reset = <&gpio 21 0>;
+                       gpio-reset = <&gpio 21 0>;
                        req-mask = <0x1>;               /* GNT1 */
                };
 
        };
 
-       sflash@E100800 {
-               compatible = "lantiq,sflash_at45";
-               reg = <0xE100800 0x100>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partition@0 {
-                       label = "uboot";
-                       reg = <0x00000 0x10000>;
-               };
-
-               partition@10000 {
-                       label = "uboot_env";
-                       reg = <0x10000 0x10000>;
-               };
-
-               partition@20000 {
-                       label = "linux";
-                       reg = <0x20000 0x1d0000>;
-               };
-       };
-
        gpio-keys {
                compatible = "gpio-keys1";
                reset {
@@ -128,6 +107,7 @@
                        linux,code = <0x100>;
                };
        };
+
        gpio-leds {
                compatible = "gpio-leds";
                festnetz {

diff --git a/target/linux/lantiq/image/ARV752DPW.dts b/target/linux/lantiq/image/ARV752DPW.dts
new file mode 100644 (file)
index 0000000..eb28b9b
--- /dev/null
+++ b/target/linux/lantiq/image/ARV752DPW.dts
@@ -0,0 +1,186 @@
+/dts-v1/;
+
+/include/ "danube.dtsi"
+
+/ {
+       chosen {
+               bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+       };
+
+       memory@0 {
+               reg = <0x0 0x4000000>;
+       };
+
+       fpi@10000000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               localbus@0 {
+                       #address-cells = <2>;
+                       #size-cells = <1>;
+                       ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+                               1 0 0x4000000 0x4000010>; /* addsel1 */
+                       compatible = "lantiq,localbus", "simple-bus";
+
+                       nor-boot@0 {
+                               compatible = "lantiq,nor";
+                               bank-width = <2>;
+                               reg = <0 0x0 0x800000>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+
+                               partition@0 {
+                                       label = "uboot";
+                                       reg = <0x00000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@10000 {
+                                       label = "uboot_env";
+                                       reg = <0x10000 0x10000>;
+                               };
+
+                               partition@20000 {
+                                       label = "linux";
+                                       reg = <0x20000 0x7d0000>;
+                               };
+
+                               partition@7f0000 {
+                                       label = "boardconfig";
+                                       reg = <0x7f0000 0x10000>;
+                                       read-only;
+                               };
+                       };
+                       gpiomm: gpiomm@4000000 {
+                               compatible = "lantiq,gpio-mm";
+                               reg = <1 0x0 0x10 >;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               #gpio-cells = <2>;
+                               gpio-controller;
+                               lantiq,shadow = <2>;
+                       };
+               };
+
+               gpio: pinmux@E100B10 {
+                       compatible = "lantiq,pinctrl-xway";
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&state_default>;
+
+                       #gpio-cells = <2>;
+                       gpio-controller;
+                       reg = <0xE100B10 0xA0>;
+
+                       state_default: pinmux {
+                               ebu {
+                                       lantiq,groups = "ebu cs1";
+                                       lantiq,function = "ebu";
+                               };
+                               pci {
+                                       lantiq,groups = "gnt1", "req1";
+                                       lantiq,function = "pci";
+                               };
+                               conf_out {
+                                       lantiq,pins = "io3", "io5", "io6", "io8", /* leds */
+                                                       "io21"; /* pci-rst */
+                                       lantiq,open-drain;
+                                       lantiq,pull = <0>;
+                               };
+                       };
+               };
+
+               adsl: dsl@E116000 {
+                       compatible = "lantiq,dsl-xway";
+                       interrupt-parent = <&icu0>;
+                       interrupts = <63 96>;
+               };
+
+               etop@E180000 {
+                       compatible = "lantiq,etop-xway";
+                       reg = <0xE180000 0x40000>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <73 78>;
+                       phy-mode = "rmii";
+                       mac-address = [ 00 11 22 33 44 55 ];
+               };
+
+               pci@E105400 {
+                       lantiq,bus-clock = <33333333>;
+                       interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+                       interrupt-map = <
+                                0x7000 0 0 1 &icu0 30 1 // slot 14, irq 29
+                       >;
+                       lantiq,external-clock;
+                       gpio-reset = <&gpio 21 0>;
+                       req-mask = <0x3>;
+               };
+
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys1";
+               reset {
+                       label = "Reset";
+                       gpios = <&gpio 29 1>;
+                       gpio-key,wakeup;
+                       linux,code = <0x100>;
+               };
+       };
+       gpio-leds {
+               compatible = "gpio-leds";
+               power0 {
+                       label = "power0";
+                       gpios = <&gpio 3 1>;
+                       default-state = "on";
+               };
+               message {
+                       label = "message";
+                       gpios = <&gpio 5 1>;
+                       default-state = "on";
+               };
+               power1 {
+                       label = "power1";
+                       gpios = <&gpio 6 1>;
+                       default-state = "on";
+               };
+               voice1 {
+                       label = "voice1";
+                       gpios = <&gpio 8 1>;
+                       default-state = "on";
+               };
+               microphone {
+                       label = "microphone";
+                       gpios = <&gpiomm 3 1>;
+                       default-state = "on";
+               };
+               wifi {
+                       label = "wifi";
+                       gpios = <&gpiomm 4 1>;
+                       default-state = "on";
+               };
+               fxs1 {
+                       label = "fxs1";
+                       gpios = <&gpiomm 5 1>;
+                       default-state = "on";
+               };
+               fx2 {
+                       label = "fxs2";
+                       gpios = <&gpiomm 6 1>;
+                       default-state = "on";
+               };
+               fxo {
+                       label = "fxo";
+                       gpios = <&gpiomm 7 1>;
+                       default-state = "on";
+               };
+               internet {
+                       label = "internet";
+                       gpios = <&gpiomm 8 1>;
+                       default-state = "on";
+               };
+               voice2 {
+                       label = "voice2";
+                       gpios = <&gpiomm 9 1>;
+                       default-state = "on";
+               };
+       };
+};

diff --git a/target/linux/lantiq/image/ARV752DPW22.dts b/target/linux/lantiq/image/ARV752DPW22.dts
new file mode 100644 (file)
index 0000000..7349bdb
--- /dev/null
+++ b/target/linux/lantiq/image/ARV752DPW22.dts
@@ -0,0 +1,206 @@
+/dts-v1/;
+
+/include/ "danube.dtsi"
+
+/ {
+       chosen {
+               bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+       };
+
+       memory@0 {
+               reg = <0x0 0x4000000>;
+       };
+
+       fpi@10000000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               localbus@0 {
+                       #address-cells = <2>;
+                       #size-cells = <1>;
+                       ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+                               1 0 0x4000000 0x4000010>; /* addsel1 */
+                       compatible = "lantiq,localbus", "simple-bus";
+
+                       nor-boot@0 {
+                               compatible = "lantiq,nor";
+                               bank-width = <2>;
+                               reg = <0 0x0 0x800000>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+
+                               partition@0 {
+                                       label = "uboot";
+                                       reg = <0x00000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@10000 {
+                                       label = "uboot_env";
+                                       reg = <0x10000 0x10000>;
+                               };
+
+                               partition@20000 {
+                                       label = "linux";
+                                       reg = <0x20000 0x7d0000>;
+                               };
+
+                               partition@7f0000 {
+                                       label = "boardconfig";
+                                       reg = <0x7f0000 0x10000>;
+                                       read-only;
+                               };
+                       };
+                       gpiomm: gpiomm@4000000 {
+                               compatible = "lantiq,gpio-mm";
+                               reg = <1 0x0 0x10 >;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               #gpio-cells = <2>;
+                               gpio-controller;
+                               lantiq,shadow = <2>;
+                       };
+               };
+
+               gpio: pinmux@E100B10 {
+                       compatible = "lantiq,pinctrl-xway";
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&state_default>;
+
+                       #gpio-cells = <2>;
+                       gpio-controller;
+                       reg = <0xE100B10 0xA0>;
+
+                       state_default: pinmux {
+                               exin {
+                                       lantiq,groups = "exin1";
+                                       lantiq,function = "exin";
+                               };
+                               pci {
+                                       lantiq,groups = "gnt1", "gnt2", "req1", "req2";
+                                       lantiq,function = "pci";
+                               };
+                               conf_out {
+                                       lantiq,pins = "io3", "io5", "io6", "io8", /* leds */
+                                                       "io21"; /* pci-rst */
+                                       lantiq,open-drain;
+                                       lantiq,pull = <0>;
+                               };
+                       };
+               };
+
+               adsl: dsl@E116000 {
+                       compatible = "lantiq,dsl-xway";
+                       interrupt-parent = <&icu0>;
+                       interrupts = <63 96>;
+               };
+
+               etop@E180000 {
+                       compatible = "lantiq,etop-xway";
+                       reg = <0xE180000 0x40000>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <73 78>;
+                       phy-mode = "rmii";
+                       mac-address = [ 00 11 22 33 44 55 ];
+               };
+
+               pci@E105400 {
+                       lantiq,bus-clock = <33333333>;
+                       interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+                       interrupt-map = <
+                                0x7000 0 0 1 &icu0 30 1 // slot 14, irq 29
+                       >;
+                       lantiq,external-clock;
+                       gpio-reset = <&gpio 21 0>;
+                       req-mask = <0x3>;
+               };
+
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys1";
+               reset {
+                       label = "Reset";
+                       gpios = <&gpio 29 1>;
+                       gpio-key,wakeup;
+                       linux,code = <0x100>;
+               };
+       };
+       gpio-leds {
+               compatible = "gpio-leds";
+               power0 {
+                       label = "power0";
+                       gpios = <&gpio 3 1>;
+                       default-state = "on";
+               };
+               message {
+                       label = "message";
+                       gpios = <&gpio 5 1>;
+                       default-state = "on";
+               };
+               power1 {
+                       label = "power1";
+                       gpios = <&gpio 6 1>;
+                       default-state = "on";
+               };
+               voice1 {
+                       label = "voice1";
+                       gpios = <&gpio 8 1>;
+                       default-state = "on";
+               };
+               microphone {
+                       label = "microphone";
+                       gpios = <&gpiomm 3 1>;
+                       default-state = "on";
+               };
+               wifi {
+                       label = "wifi";
+                       gpios = <&gpiomm 4 1>;
+                       default-state = "on";
+               };
+               fxs1 {
+                       label = "fxs1";
+                       gpios = <&gpiomm 5 1>;
+                       default-state = "on";
+               };
+               fx2 {
+                       label = "fxs2";
+                       gpios = <&gpiomm 6 1>;
+                       default-state = "on";
+               };
+               fxo {
+                       label = "fxo";
+                       gpios = <&gpiomm 7 1>;
+                       default-state = "on";
+               };
+               internet {
+                       label = "internet";
+                       gpios = <&gpiomm 8 1>;
+                       default-state = "on";
+               };
+               voice2 {
+                       label = "voice2";
+                       gpios = <&gpiomm 9 1>;
+                       default-state = "on";
+               };
+               eth1 {
+                        label = "eth1";
+                        gpios = <&gpiomm 11 1>;
+                        default-state = "on";
+               };
+               eth2 {
+                       label = "eth2";
+                       gpios = <&gpiomm 12 1>;
+                       default-state = "on";
+               };
+               eth3 {
+                       label = "eth3";
+                       gpios = <&gpiomm 13 1>;
+                       default-state = "on";
+               };
+               eth4 {
+                       label = "eth4";
+                       gpios = <&gpiomm 14 1>;
+                       default-state = "on";
+               };
+       };
+};

diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile
index 11374ef94545b24c80a5a47376b6d0727a1199c6..ef289823dd49debc74cca7ee4784a05e0ed15f15 100644 (file)
--- a/target/linux/lantiq/image/Makefile
+++ b/target/linux/lantiq/image/Makefile
@@ -21,7 +21,7 @@ endef
 
 define PatchKernelLzma
        cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(1)
-ifeq ($(CONFIG_LINUX_3_5),y)
+ifeq ($(CONFIG_LINUX_3_6),y)
        $(LINUX_DIR)/scripts/dtc/dtc -O dtb -o $(KDIR)/$(1).dtb ./$(1).dts
        $(STAGING_DIR_HOST)/bin/patch-dtb $(KDIR)/vmlinux-$(1) $(KDIR)/$(1).dtb
 else
@@ -202,14 +202,25 @@ endif
 
 ifeq ($(CONFIG_TARGET_lantiq_xway),y)
 
+# VR9
 Image/BuildKernel/Profile/EASY80920-NAND=$(call Image/BuildKernel/Template,EASY80920-NAND)
 Image/Build/Profile/EASY80920-NAND=$(call Image/Build/$(1),$(1),EASY80920-NAND)
 Image/BuildKernel/Profile/EASY80920-NOR=$(call Image/BuildKernel/Template,EASY80920-NOR)
 Image/Build/Profile/EASY80920-NOR=$(call Image/Build/$(1),$(1),EASY80920-NOR)
 
+# Danube
 Image/BuildKernel/Profile/ARV7525PW=$(call Image/BuildKernel/Template,ARV7525PW)
 Image/Build/Profile/ARV7525PW=$(call Image/Build/$(1),$(1),ARV7525PW)
 
+Image/BuildKernel/Profile/ARV4520PW=$(call Image/BuildKernel/Template,ARV4520PW)
+Image/Build/Profile/ARV4520PW=$(call Image/Build/$(1),$(1),ARV4520PW)
+
+Image/BuildKernel/Profile/ARV752DPW=$(call Image/BuildKernel/Template,ARV752DPW)
+Image/Build/Profile/ARV752DPW=$(call Image/Build/$(1),$(1),ARV752DPW)
+
+Image/BuildKernel/Profile/ARV752DPW22=$(call Image/BuildKernel/Template,ARV752DPW22)
+Image/Build/Profile/ARV752DPW22=$(call Image/Build/$(1),$(1),ARV752DPW22)
+
 endif
 
 ifeq ($(CONFIG_TARGET_lantiq_vr9),y)