* XIP support hooks by Vitaly Wool (based on code for Intel flash
* by Nicolas Pitre)
*
+ * 25/09/2008 Christopher Moore: TopBottom fixup for many Macronix with CFI V1.0
+ *
* Occasionally maintained by Thayne Harbaugh tharbaugh at lnxi dot com
*
* This code is GPL
#define MANUFACTURER_AMD 0x0001
#define MANUFACTURER_ATMEL 0x001F
+#define MANUFACTURER_MACRONIX 0x00C2
#define MANUFACTURER_SST 0x00BF
#define SST49LF004B 0x0060
#define SST49LF040B 0x0050
if (((major << 8) | minor) < 0x3131) {
/* CFI version 1.0 => don't trust bootloc */
+
+ DEBUG(MTD_DEBUG_LEVEL1,
+ "%s: JEDEC Vendor ID is 0x%02X Device ID is 0x%02X\n",
+ map->name, cfi->mfr, cfi->id);
+
+ /* AFAICS all 29LV400 with a bottom boot block have a device ID
+ * of 0x22BA in 16-bit mode and 0xBA in 8-bit mode.
+ * These were badly detected as they have the 0x80 bit set
+ * so treat them as a special case.
+ */
+ if (((cfi->id == 0xBA) || (cfi->id == 0x22BA)) &&
+
+ /* Macronix added CFI to their 2nd generation
+ * MX29LV400C B/T but AFAICS no other 29LV400 (AMD,
+ * Fujitsu, Spansion, EON, ESI and older Macronix)
+ * has CFI.
+ *
+ * Therefore also check the manufacturer.
+ * This reduces the risk of false detection due to
+ * the 8-bit device ID.
+ */
+ (cfi->mfr == MANUFACTURER_MACRONIX)) {
+ DEBUG(MTD_DEBUG_LEVEL1,
+ "%s: Macronix MX29LV400C with bottom boot block"
+ " detected\n", map->name);
+ extp->TopBottom = 2; /* bottom boot */
+ } else
if (cfi->id & 0x80) {
printk(KERN_WARNING "%s: JEDEC Device ID is 0x%02X. Assuming broken CFI table.\n", map->name, cfi->id);
extp->TopBottom = 3; /* top boot */
} else {
extp->TopBottom = 2; /* bottom boot */
}
+
+ DEBUG(MTD_DEBUG_LEVEL1,
+ "%s: AMD CFI PRI V%c.%c has no boot block field;"
+ " deduced %s from Device ID\n", map->name, major, minor,
+ extp->TopBottom == 2 ? "bottom" : "top");
}
}
#endif
{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
#ifdef AMD_BOOTLOC_BUG
{ CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
+ { MANUFACTURER_MACRONIX, CFI_ID_ANY, fixup_amd_bootblock, NULL },
#endif
{ CFI_MFR_AMD, 0x0050, fixup_use_secsi, NULL, },
{ CFI_MFR_AMD, 0x0053, fixup_use_secsi, NULL, },