sm750fb/sm750_hw.c: fixed comments

Fixed multiline comments to meet style standards,
fixed typos and split comment lines over 80 characters.

Signed-off-by: Stefan Wolz <wolzstefan@web.de>
Signed-off-by: Christian Halder <christian.halder@fau.de>
Signed-off-by: Sebastian Handwerker <sebastian.handwerker@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index 052f1139ef80ccdb88364a0f0c21801a48cd5dda..f2ed82ead143c06bf307406de194af25a4be31b9 100644 (file)
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -35,17 +35,17 @@ int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
        pr_info("mmio phyAddr = %lx\n", sm750_dev->vidreg_start);
 
        /* reserve the vidreg space of smi adaptor
-        * if you do this, u need to add release region code
+        * if you do this, you need to add release region code
         * in lynxfb_remove, or memory will not be mapped again
         * successfully
-        * */
+        */
        ret = pci_request_region(pdev, 1, "sm750fb");
        if (ret) {
                pr_err("Can not request PCI regions.\n");
                goto exit;
        }
 
-       /* now map mmio and vidmem*/
+       /* now map mmio and vidmem */
        sm750_dev->pvReg = ioremap_nocache(sm750_dev->vidreg_start,
                                           sm750_dev->vidreg_size);
        if (!sm750_dev->pvReg) {
@@ -63,10 +63,10 @@ int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
 
        sm750_dev->vidmem_start = pci_resource_start(pdev, 0);
        /* don't use pdev_resource[x].end - resource[x].start to
-        * calculate the resource size,its only the maximum available
-        * size but not the actual size,use
+        * calculate the resource size, it's only the maximum available
+        * size but not the actual size, using
         * @ddk750_getVMSize function can be safe.
-        * */
+        */
        sm750_dev->vidmem_size = ddk750_getVMSize();
        pr_info("video memory phyAddr = %lx, size = %u bytes\n",
                sm750_dev->vidmem_start, sm750_dev->vidmem_size);
@@ -101,7 +101,7 @@ int hw_sm750_inithw(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
                parm->master_clk = parm->chip_clk / 3;
 
        ddk750_initHw((initchip_param_t *)&sm750_dev->initParm);
-       /* for sm718,open pci burst */
+       /* for sm718, open pci burst */
        if (sm750_dev->devid == 0x718) {
                POKE32(SYSTEM_CTRL,
                       PEEK32(SYSTEM_CTRL) | SYSTEM_CTRL_PCI_BURST);
@@ -109,7 +109,7 @@ int hw_sm750_inithw(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
 
        if (getChipType() != SM750LE) {
                unsigned int val;
-               /* does user need CRT ?*/
+               /* does user need CRT? */
                if (sm750_dev->nocrt) {
                        POKE32(MISC_CTRL,
                               PEEK32(MISC_CTRL) | MISC_CTRL_DAC_POWER_OFF);
@@ -141,19 +141,21 @@ int hw_sm750_inithw(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
                }
                POKE32(PANEL_DISPLAY_CTRL, val);
        } else {
-               /* for 750LE ,no DVI chip initialization makes Monitor no signal */
-               /* Set up GPIO for software I2C to program DVI chip in the
-                  Xilinx SP605 board, in order to have video signal.
+               /* for 750LE, no DVI chip initialization
+                * makes Monitor no signal
+                *
+                * Set up GPIO for software I2C to program DVI chip in the
+                * Xilinx SP605 board, in order to have video signal.
                 */
                sm750_sw_i2c_init(0, 1);
 
                /* Customer may NOT use CH7301 DVI chip, which has to be
-               initialized differently.
-               */
+                * initialized differently.
+                */
                if (sm750_sw_i2c_read_reg(0xec, 0x4a) == 0x95) {
                /* The following register values for CH7301 are from
-                  Chrontel app note and our experiment.
-               */
+                * Chrontel app note and our experiment.
+                */
                        pr_info("yes,CH7301 DVI chip found\n");
                        sm750_sw_i2c_write_reg(0xec, 0x1d, 0x16);
                        sm750_sw_i2c_write_reg(0xec, 0x21, 0x9);
@@ -198,7 +200,7 @@ int hw_sm750_output_setMode(struct lynxfb_output *output,
                }
                ddk750_setLogicalDispOut(dispSet);
        } else {
-               /* just open DISPLAY_CONTROL_750LE register bit 3:0*/
+               /* just open DISPLAY_CONTROL_750LE register bit 3:0 */
                u32 reg;
 
                reg = PEEK32(DISPLAY_CONTROL_750LE);
@@ -234,9 +236,7 @@ int hw_sm750_crtc_checkMode(struct lynxfb_crtc *crtc, struct fb_var_screeninfo *
        return 0;
 }
 
-/*
-       set the controller's mode for @crtc charged with @var and @fix parameters
-*/
+/* set the controller's mode for @crtc charged with @var and @fix parameters */
 int hw_sm750_crtc_setMode(struct lynxfb_crtc *crtc,
                          struct fb_var_screeninfo *var,
                          struct fb_fix_screeninfo *fix)
@@ -300,12 +300,14 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc *crtc,
        }
 
        if (crtc->channel != sm750_secondary) {
-               /* set pitch, offset ,width,start address ,etc... */
+               /* set pitch, offset, width, start address, etc... */
                POKE32(PANEL_FB_ADDRESS,
                       crtc->oScreen & PANEL_FB_ADDRESS_ADDRESS_MASK);
 
                reg = var->xres * (var->bits_per_pixel >> 3);
-               /* crtc->channel is not equal to par->index on numeric,be aware of that */
+               /* crtc->channel is not equal to par->index on numeric,
+                * be aware of that
+                */
                reg = ALIGN(reg, crtc->line_pad);
                reg = (reg << PANEL_FB_WIDTH_WIDTH_SHIFT) &
                       PANEL_FB_WIDTH_WIDTH_MASK;
@@ -337,7 +339,9 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc *crtc,
                /* not implemented now */
                POKE32(CRT_FB_ADDRESS, crtc->oScreen);
                reg = var->xres * (var->bits_per_pixel >> 3);
-               /* crtc->channel is not equal to par->index on numeric,be aware of that */
+               /* crtc->channel is not equal to par->index on numeric,
+                * be aware of that
+                */
                reg = ALIGN(reg, crtc->line_pad) << CRT_FB_WIDTH_WIDTH_SHIFT;
                reg &= CRT_FB_WIDTH_WIDTH_MASK;
                reg |= (fix->line_length & CRT_FB_WIDTH_OFFSET_MASK);