Starting from Icelake, XMM registers can be collected in PEBS record.
But current code only output the pt_regs.
Add a new struct x86_perf_regs for both pt_regs and xmm_regs. The
xmm_regs will be used later to keep a pointer to PEBS record which has
XMM information.
XMM registers are 128 bit. To simplify the code, they are handled like
two different registers, which means setting two bits in the register
bitmap. This also allows only sampling the lower 64bit bits in XMM.
The index of XMM registers starts from 32. There are 16 XMM registers.
So all reserved space for regs are used. Remove REG_RESERVED.
Add PERF_REG_X86_XMM_MAX, which stands for the max number of all x86
regs including both GPRs and XMM.
Add REG_NOSUPPORT for 32bit to exclude unsupported registers.
Previous platforms can not collect XMM information in PEBS record.
Adding pebs_no_xmm_regs to indicate the unsupported platforms.
The common code still validates the supported registers. However, it
cannot check model specific registers, e.g. XMM. Add extra check in
x86_pmu_hw_config() to reject invalid config of regs_user and regs_intr.
The regs_user never supports XMM collection.
The regs_intr only supports XMM collection when sampling PEBS event on
icelake and later platforms.
Originally-by: Andi Kleen <ak@linux.intel.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Link: https://lkml.kernel.org/r/20190402194509.2832-3-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
return -EINVAL;
}
+ /* sample_regs_user never support XMM registers */
+ if (unlikely(event->attr.sample_regs_user & PEBS_XMM_REGS))
+ return -EINVAL;
+ /*
+ * Besides the general purpose registers, XMM registers may
+ * be collected in PEBS on some platforms, e.g. Icelake
+ */
+ if (unlikely(event->attr.sample_regs_intr & PEBS_XMM_REGS)) {
+ if (x86_pmu.pebs_no_xmm_regs)
+ return -EINVAL;
+
+ if (!event->attr.precise_ip)
+ return -EINVAL;
+ }
+
return x86_setup_perfctr(event);
}
x86_pmu.bts = boot_cpu_has(X86_FEATURE_BTS);
x86_pmu.pebs = boot_cpu_has(X86_FEATURE_PEBS);
x86_pmu.pebs_buffer_size = PEBS_BUFFER_SIZE;
- if (x86_pmu.version <= 4)
+ if (x86_pmu.version <= 4) {
x86_pmu.pebs_no_isolation = 1;
+ x86_pmu.pebs_no_xmm_regs = 1;
+ }
if (x86_pmu.pebs) {
char pebs_type = x86_pmu.intel_cap.pebs_trap ? '+' : '-';
int format = x86_pmu.intel_cap.pebs_format;
(1ULL << PERF_REG_X86_R14) | \
(1ULL << PERF_REG_X86_R15))
+#define PEBS_XMM_REGS \
+ ((1ULL << PERF_REG_X86_XMM0) | \
+ (1ULL << PERF_REG_X86_XMM1) | \
+ (1ULL << PERF_REG_X86_XMM2) | \
+ (1ULL << PERF_REG_X86_XMM3) | \
+ (1ULL << PERF_REG_X86_XMM4) | \
+ (1ULL << PERF_REG_X86_XMM5) | \
+ (1ULL << PERF_REG_X86_XMM6) | \
+ (1ULL << PERF_REG_X86_XMM7) | \
+ (1ULL << PERF_REG_X86_XMM8) | \
+ (1ULL << PERF_REG_X86_XMM9) | \
+ (1ULL << PERF_REG_X86_XMM10) | \
+ (1ULL << PERF_REG_X86_XMM11) | \
+ (1ULL << PERF_REG_X86_XMM12) | \
+ (1ULL << PERF_REG_X86_XMM13) | \
+ (1ULL << PERF_REG_X86_XMM14) | \
+ (1ULL << PERF_REG_X86_XMM15))
+
/*
* Per register state.
*/
pebs_broken :1,
pebs_prec_dist :1,
pebs_no_tlb :1,
- pebs_no_isolation :1;
+ pebs_no_isolation :1,
+ pebs_no_xmm_regs :1;
int pebs_record_size;
int pebs_buffer_size;
void (*drain_pebs)(struct pt_regs *regs);
#define PERF_EFLAGS_VM (1UL << 5)
struct pt_regs;
+struct x86_perf_regs {
+ struct pt_regs regs;
+ u64 *xmm_regs;
+};
+
extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
extern unsigned long perf_misc_flags(struct pt_regs *regs);
#define perf_misc_flags(regs) perf_misc_flags(regs)
PERF_REG_X86_R13,
PERF_REG_X86_R14,
PERF_REG_X86_R15,
-
+ /* These are the limits for the GPRs. */
PERF_REG_X86_32_MAX = PERF_REG_X86_GS + 1,
PERF_REG_X86_64_MAX = PERF_REG_X86_R15 + 1,
+
+ /* These all need two bits set because they are 128bit */
+ PERF_REG_X86_XMM0 = 32,
+ PERF_REG_X86_XMM1 = 34,
+ PERF_REG_X86_XMM2 = 36,
+ PERF_REG_X86_XMM3 = 38,
+ PERF_REG_X86_XMM4 = 40,
+ PERF_REG_X86_XMM5 = 42,
+ PERF_REG_X86_XMM6 = 44,
+ PERF_REG_X86_XMM7 = 46,
+ PERF_REG_X86_XMM8 = 48,
+ PERF_REG_X86_XMM9 = 50,
+ PERF_REG_X86_XMM10 = 52,
+ PERF_REG_X86_XMM11 = 54,
+ PERF_REG_X86_XMM12 = 56,
+ PERF_REG_X86_XMM13 = 58,
+ PERF_REG_X86_XMM14 = 60,
+ PERF_REG_X86_XMM15 = 62,
+
+ /* These include both GPRs and XMMX registers */
+ PERF_REG_X86_XMM_MAX = PERF_REG_X86_XMM15 + 2,
};
#endif /* _ASM_X86_PERF_REGS_H */
u64 perf_reg_value(struct pt_regs *regs, int idx)
{
+ struct x86_perf_regs *perf_regs;
+
+ if (idx >= PERF_REG_X86_XMM0 && idx < PERF_REG_X86_XMM_MAX) {
+ perf_regs = container_of(regs, struct x86_perf_regs, regs);
+ if (!perf_regs->xmm_regs)
+ return 0;
+ return perf_regs->xmm_regs[idx - PERF_REG_X86_XMM0];
+ }
+
if (WARN_ON_ONCE(idx >= ARRAY_SIZE(pt_regs_offset)))
return 0;
return regs_get_register(regs, pt_regs_offset[idx]);
}
-#define REG_RESERVED (~((1ULL << PERF_REG_X86_MAX) - 1ULL))
-
#ifdef CONFIG_X86_32
+#define REG_NOSUPPORT ((1ULL << PERF_REG_X86_R8) | \
+ (1ULL << PERF_REG_X86_R9) | \
+ (1ULL << PERF_REG_X86_R10) | \
+ (1ULL << PERF_REG_X86_R11) | \
+ (1ULL << PERF_REG_X86_R12) | \
+ (1ULL << PERF_REG_X86_R13) | \
+ (1ULL << PERF_REG_X86_R14) | \
+ (1ULL << PERF_REG_X86_R15))
+
int perf_reg_validate(u64 mask)
{
- if (!mask || mask & REG_RESERVED)
+ if (!mask || (mask & REG_NOSUPPORT))
return -EINVAL;
return 0;
int perf_reg_validate(u64 mask)
{
- if (!mask || mask & REG_RESERVED)
- return -EINVAL;
-
- if (mask & REG_NOSUPPORT)
+ if (!mask || (mask & REG_NOSUPPORT))
return -EINVAL;
return 0;
projects / openwrt / staging / blogic.git / commitdiff