+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/slab.h>
{
struct completion *urb_done_ptr = urb->context;
- //printk("transport --- usb_stor_blocking_completion\n");
+ /* pr_info("transport --- usb_stor_blocking_completion\n"); */
complete(urb_done_ptr);
}
long timeleft;
int status;
- //printk("transport --- usb_stor_msg_common\n");
+ /* pr_info("transport --- usb_stor_msg_common\n"); */
if (test_bit(US_FLIDX_ABORTING, &us->dflags))
return -EIO;
{
if (test_and_clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags))
{
- //printk("-- cancelling URB\n");
+ /* pr_info("-- cancelling URB\n"); */
usb_unlink_urb(us->current_urb);
}
}
if (timeleft <= 0)
{
- //printk("%s -- cancelling URB\n", timeleft == 0 ? "Timeout" : "Signal");
+ /* pr_info("%s -- cancelling URB\n",
+ timeleft == 0 ? "Timeout" : "Signal"); */
usb_kill_urb(us->current_urb);
}
{
int status;
- //printk("transport --- usb_stor_control_msg\n");
+ /* pr_info("transport --- usb_stor_control_msg\n"); */
/* fill in the devrequest structure */
us->cr->bRequestType = requesttype;
int result;
int endp = usb_pipeendpoint(pipe);
- //printk("transport --- usb_stor_clear_halt\n");
+ /* pr_info("transport --- usb_stor_clear_halt\n"); */
if (usb_pipein (pipe))
endp |= USB_DIR_IN;
static int interpret_urb_result(struct us_data *us, unsigned int pipe,
unsigned int length, int result, unsigned int partial)
{
- //printk("transport --- interpret_urb_result\n");
+ /* pr_info("transport --- interpret_urb_result\n"); */
switch (result) {
/* no error code; did we send all the data? */
case 0:
if (partial != length)
{
- //printk("-- short transfer\n");
+ /* pr_info("-- short transfer\n"); */
return USB_STOR_XFER_SHORT;
}
- //printk("-- transfer complete\n");
+ /* pr_info("-- transfer complete\n"); */
return USB_STOR_XFER_GOOD;
case -EPIPE:
if (usb_pipecontrol(pipe))
{
- //printk("-- stall on control pipe\n");
+ /* pr_info("-- stall on control pipe\n"); */
return USB_STOR_XFER_STALLED;
}
- //printk("clearing endpoint halt for pipe 0x%x\n", pipe);
+ /* pr_info("clearing endpoint halt for pipe 0x%x\n", pipe); */
if (usb_stor_clear_halt(us, pipe) < 0)
return USB_STOR_XFER_ERROR;
return USB_STOR_XFER_STALLED;
case -EOVERFLOW:
- //printk("-- babble\n");
+ /* pr_info("-- babble\n"); */
return USB_STOR_XFER_LONG;
case -ECONNRESET:
- //printk("-- transfer cancelled\n");
+ /* pr_info("-- transfer cancelled\n"); */
return USB_STOR_XFER_ERROR;
case -EREMOTEIO:
- //printk("-- short read transfer\n");
+ /* pr_info("-- short read transfer\n"); */
return USB_STOR_XFER_SHORT;
case -EIO:
- //printk("-- abort or disconnect in progress\n");
+ /* pr_info("-- abort or disconnect in progress\n"); */
return USB_STOR_XFER_ERROR;
default:
- //printk("-- unknown error\n");
+ /* pr_info("-- unknown error\n"); */
return USB_STOR_XFER_ERROR;
}
}
{
int result;
- //printk("transport --- usb_stor_bulk_transfer_buf\n");
+ /* pr_info("transport --- usb_stor_bulk_transfer_buf\n"); */
/* fill and submit the URB */
usb_fill_bulk_urb(us->current_urb, us->pusb_dev, pipe, buf, length, usb_stor_blocking_completion, NULL);
{
int result;
- //printk("transport --- usb_stor_bulk_transfer_sglist\n");
+ /* pr_info("transport --- usb_stor_bulk_transfer_sglist\n"); */
if (test_bit(US_FLIDX_ABORTING, &us->dflags))
return USB_STOR_XFER_ERROR;
result = usb_sg_init(&us->current_sg, us->pusb_dev, pipe, 0, sg, num_sg, length, GFP_NOIO);
if (result)
{
- //printk("usb_sg_init returned %d\n", result);
+ /* pr_info("usb_sg_init returned %d\n", result); */
return USB_STOR_XFER_ERROR;
}
/* cancel the request, if it hasn't been cancelled already */
if (test_and_clear_bit(US_FLIDX_SG_ACTIVE, &us->dflags))
{
- //printk("-- cancelling sg request\n");
+ /* pr_info("-- cancelling sg request\n"); */
usb_sg_cancel(&us->current_sg);
}
}
int result;
unsigned int partial;
- //printk("transport --- usb_stor_bulk_transfer_sg\n");
+ /* pr_info("transport --- usb_stor_bulk_transfer_sg\n"); */
/* are we scatter-gathering? */
if (use_sg)
{
int need_auto_sense;
int result;
- //printk("transport --- usb_stor_invoke_transport\n");
+ /* pr_info("transport --- usb_stor_invoke_transport\n"); */
usb_stor_print_cmd(srb);
/* send the command to the transport layer */
scsi_set_resid(srb, 0);
/* if the command gets aborted by the higher layers, we need to short-circuit all other processing */
if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags))
{
- //printk("-- command was aborted\n");
+ /* pr_info("-- command was aborted\n"); */
srb->result = DID_ABORT << 16;
goto Handle_Errors;
}
/* if there is a transport error, reset and don't auto-sense */
if (result == USB_STOR_TRANSPORT_ERROR)
{
- //printk("-- transport indicates error, resetting\n");
+ /* pr_info("-- transport indicates error, resetting\n"); */
srb->result = DID_ERROR << 16;
goto Handle_Errors;
}
if ((us->protocol == USB_PR_CB || us->protocol == USB_PR_DPCM_USB) && srb->sc_data_direction != DMA_FROM_DEVICE)
{
- //printk("-- CB transport device requiring auto-sense\n");
+ /* pr_info("-- CB transport device requiring auto-sense\n"); */
need_auto_sense = 1;
}
if (result == USB_STOR_TRANSPORT_FAILED)
{
- //printk("-- transport indicates command failure\n");
+ /* pr_info("-- transport indicates command failure\n"); */
need_auto_sense = 1;
}
int temp_result;
struct scsi_eh_save ses;
- printk("Issuing auto-REQUEST_SENSE\n");
+ pr_info("Issuing auto-REQUEST_SENSE\n");
scsi_eh_prep_cmnd(srb, &ses, NULL, 0, US_SENSE_SIZE);
if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags))
{
- //printk("-- auto-sense aborted\n");
+ /* pr_info("-- auto-sense aborted\n"); */
srb->result = DID_ABORT << 16;
goto Handle_Errors;
}
if (temp_result != USB_STOR_TRANSPORT_GOOD)
{
- //printk("-- auto-sense failure\n");
+ /* pr_info("-- auto-sense failure\n"); */
srb->result = DID_ERROR << 16;
if (!(us->fflags & US_FL_SCM_MULT_TARG))
goto Handle_Errors;
{
int result=0;
- //printk("transport --- ENE_stor_invoke_transport\n");
+ /* pr_info("transport --- ENE_stor_invoke_transport\n"); */
usb_stor_print_cmd(srb);
/* send the command to the transport layer */
scsi_set_resid(srb, 0);
/* if the command gets aborted by the higher layers, we need to short-circuit all other processing */
if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags))
{
- //printk("-- command was aborted\n");
+ /* pr_info("-- command was aborted\n"); */
srb->result = DID_ABORT << 16;
goto Handle_Errors;
}
/* if there is a transport error, reset and don't auto-sense */
if (result == USB_STOR_TRANSPORT_ERROR)
{
- //printk("-- transport indicates error, resetting\n");
+ /* pr_info("-- transport indicates error, resetting\n"); */
srb->result = DID_ERROR << 16;
goto Handle_Errors;
}
srb->result = SAM_STAT_GOOD;
if (result == USB_STOR_TRANSPORT_FAILED)
{
- //printk("-- transport indicates command failure\n");
+ /* pr_info("-- transport indicates command failure\n"); */
//need_auto_sense = 1;
BuildSenseBuffer(srb, us->SrbStatus);
srb->result = SAM_STAT_CHECK_CONDITION;
BYTE *buf = srb->sense_buffer;
BYTE asc;
- printk("transport --- BuildSenseBuffer\n");
+ pr_info("transport --- BuildSenseBuffer\n");
switch (SrbStatus)
{
case SS_NOT_READY: asc = 0x3a; break; // sense key = 0x02
//----- usb_stor_stop_transport() ---------------------
void usb_stor_stop_transport(struct us_data *us)
{
- //printk("transport --- usb_stor_stop_transport\n");
+ /* pr_info("transport --- usb_stor_stop_transport\n"); */
if (test_and_clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags))
{
- //printk("-- cancelling URB\n");
+ /* pr_info("-- cancelling URB\n"); */
usb_unlink_urb(us->current_urb);
}
if (test_and_clear_bit(US_FLIDX_SG_ACTIVE, &us->dflags))
{
- //printk("-- cancelling sg request\n");
+ /* pr_info("-- cancelling sg request\n"); */
usb_sg_cancel(&us->current_sg);
}
}
{
int result;
- //printk("transport --- usb_stor_Bulk_max_lun\n");
+ /* pr_info("transport --- usb_stor_Bulk_max_lun\n"); */
/* issue the command */
us->iobuf[0] = 0;
result = usb_stor_control_msg(us, us->recv_ctrl_pipe,
USB_RECIP_INTERFACE,
0, us->ifnum, us->iobuf, 1, HZ);
- //printk("GetMaxLUN command result is %d, data is %d\n", result, us->iobuf[0]);
+ /* pr_info("GetMaxLUN command result is %d, data is %d\n",
+ result, us->iobuf[0]); */
/* if we have a successful request, return the result */
if (result > 0)
unsigned int cswlen;
unsigned int cbwlen = US_BULK_CB_WRAP_LEN;
- //printk("transport --- usb_stor_Bulk_transport\n");
+ /* pr_info("transport --- usb_stor_Bulk_transport\n"); */
/* Take care of BULK32 devices; set extra byte to 0 */
if (unlikely(us->fflags & US_FL_BULK32))
{
// send command
/* send it to out endpoint */
- /*printk("Bulk Command S 0x%x T 0x%x L %d F %d Trg %d LUN %d CL %d\n",
+ /* pr_info("Bulk Command S 0x%x T 0x%x L %d F %d Trg %d LUN %d CL %d\n",
le32_to_cpu(bcb->Signature), bcb->Tag,
le32_to_cpu(bcb->DataTransferLength), bcb->Flags,
(bcb->Lun >> 4), (bcb->Lun & 0x0F),
- bcb->Length);*/
+ bcb->Length); */
result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcb, cbwlen, NULL);
- //printk("Bulk command transfer result=%d\n", result);
+ /* pr_info("Bulk command transfer result=%d\n", result); */
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
{
unsigned int pipe = srb->sc_data_direction == DMA_FROM_DEVICE ? us->recv_bulk_pipe : us->send_bulk_pipe;
result = usb_stor_bulk_srb(us, pipe, srb);
- //printk("Bulk data transfer result 0x%x\n", result);
+ /* pr_info("Bulk data transfer result 0x%x\n", result); */
if (result == USB_STOR_XFER_ERROR)
return USB_STOR_TRANSPORT_ERROR;
}
/* get CSW for device status */
- //printk("Attempting to get CSW...\n");
+ /* pr_info("Attempting to get CSW...\n"); */
result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs, US_BULK_CS_WRAP_LEN, &cswlen);
if (result == USB_STOR_XFER_SHORT && cswlen == 0)
{
- //printk("Received 0-length CSW; retrying...\n");
+ /* pr_info("Received 0-length CSW; retrying...\n"); */
result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs, US_BULK_CS_WRAP_LEN, &cswlen);
}
if (result == USB_STOR_XFER_STALLED)
{
/* get the status again */
- //printk("Attempting to get CSW (2nd try)...\n");
+ /* pr_info("Attempting to get CSW (2nd try)...\n"); */
result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs, US_BULK_CS_WRAP_LEN, NULL);
}
/* if we still have a failure at this point, we're in trouble */
- //printk("Bulk status result = %d\n", result);
+ /* pr_info("Bulk status result = %d\n", result); */
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
/* check bulk status */
residue = le32_to_cpu(bcs->Residue);
- //printk("Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n", le32_to_cpu(bcs->Signature), bcs->Tag, residue, bcs->Status);
+ /* pr_info("Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n",
+ le32_to_cpu(bcs->Signature),
+ bcs->Tag, residue, bcs->Status); */
if (!(bcs->Tag == us->tag || (us->fflags & US_FL_BULK_IGNORE_TAG)) || bcs->Status > US_BULK_STAT_PHASE)
{
- //printk("Bulk logical error\n");
+ /* pr_info("Bulk logical error\n"); */
return USB_STOR_TRANSPORT_ERROR;
}
{
us->bcs_signature = bcs->Signature;
//if (us->bcs_signature != cpu_to_le32(US_BULK_CS_SIGN))
- // printk("Learnt BCS signature 0x%08X\n", le32_to_cpu(us->bcs_signature));
+ /* pr_info("Learnt BCS signature 0x%08X\n",
+ le32_to_cpu(us->bcs_signature)); */
}
else if (bcs->Signature != us->bcs_signature)
{
- /*printk("Signature mismatch: got %08X, expecting %08X\n",
+ /* pr_info("Signature mismatch: got %08X, expecting %08X\n",
le32_to_cpu(bcs->Signature),
- le32_to_cpu(us->bcs_signature));*/
+ le32_to_cpu(us->bcs_signature)); */
return USB_STOR_TRANSPORT_ERROR;
}
int result;
int result2;
- //printk("transport --- usb_stor_reset_common\n");
+ /* pr_info("transport --- usb_stor_reset_common\n"); */
if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags))
{
- //printk("No reset during disconnect\n");
+ /* pr_info("No reset during disconnect\n"); */
return -EIO;
}
result = usb_stor_control_msg(us, us->send_ctrl_pipe, request, requesttype, value, index, data, size, 5*HZ);
if (result < 0)
{
- //printk("Soft reset failed: %d\n", result);
+ /* pr_info("Soft reset failed: %d\n", result); */
return result;
}
wait_event_interruptible_timeout(us->delay_wait, test_bit(US_FLIDX_DISCONNECTING, &us->dflags), HZ*6);
if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags))
{
- //printk("Reset interrupted by disconnect\n");
+ /* pr_info("Reset interrupted by disconnect\n"); */
return -EIO;
}
- //printk("Soft reset: clearing bulk-in endpoint halt\n");
+ /* pr_info("Soft reset: clearing bulk-in endpoint halt\n"); */
result = usb_stor_clear_halt(us, us->recv_bulk_pipe);
- //printk("Soft reset: clearing bulk-out endpoint halt\n");
+ /* pr_info("Soft reset: clearing bulk-out endpoint halt\n"); */
result2 = usb_stor_clear_halt(us, us->send_bulk_pipe);
/* return a result code based on the result of the clear-halts */
if (result >= 0)
result = result2;
//if (result < 0)
- // printk("Soft reset failed\n");
+ /* pr_info("Soft reset failed\n"); */
//else
- // printk("Soft reset done\n");
+ /* pr_info("Soft reset done\n"); */
return result;
}
//----- usb_stor_Bulk_reset() ---------------------
int usb_stor_Bulk_reset(struct us_data *us)
{
- //printk("transport --- usb_stor_Bulk_reset\n");
+ /* pr_info("transport --- usb_stor_Bulk_reset\n"); */
return usb_stor_reset_common(us, US_BULK_RESET_REQUEST,
USB_TYPE_CLASS | USB_RECIP_INTERFACE,
0, us->ifnum, NULL, 0);
{
int result;
- //printk("transport --- usb_stor_port_reset\n");
+ /* pr_info("transport --- usb_stor_port_reset\n"); */
result = usb_lock_device_for_reset(us->pusb_dev, us->pusb_intf);
if (result < 0)
- printk("unable to lock device for reset: %d\n", result);
+ pr_info("unable to lock device for reset: %d\n", result);
else {
/* Were we disconnected while waiting for the lock? */
if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) {
result = -EIO;
- //printk("No reset during disconnect\n");
+ /* pr_info("No reset during disconnect\n"); */
} else {
result = usb_reset_device(us->pusb_dev);
- //printk("usb_reset_composite_device returns %d\n", result);
+ /* pr_info("usb_reset_composite_device returns %d\n",
+ result); */
}
usb_unlock_device(us->pusb_dev);
}
int eucr_suspend(struct usb_interface *iface, pm_message_t message)
{
struct us_data *us = usb_get_intfdata(iface);
- printk("--- eucr_suspend ---\n");
+ pr_info("--- eucr_suspend ---\n");
/* Wait until no command is running */
mutex_lock(&us->dev_mutex);
BYTE tmp = 0;
struct us_data *us = usb_get_intfdata(iface);
- printk("--- eucr_resume---\n");
+ pr_info("--- eucr_resume---\n");
mutex_lock(&us->dev_mutex);
//US_DEBUGP("%s\n", __func__);
BYTE tmp = 0;
struct us_data *us = usb_get_intfdata(iface);
- printk("--- eucr_reset_resume---\n");
+ pr_info("--- eucr_reset_resume---\n");
//US_DEBUGP("%s\n", __func__);
/* Report the reset to the SCSI core */
{
struct us_data *us = usb_get_intfdata(iface);
- printk("usb --- eucr_pre_reset\n");
+ pr_info("usb --- eucr_pre_reset\n");
/* Make sure no command runs during the reset */
mutex_lock(&us->dev_mutex);
{
struct us_data *us = usb_get_intfdata(iface);
- printk("usb --- eucr_post_reset\n");
+ pr_info("usb --- eucr_post_reset\n");
/* Report the reset to the SCSI core */
usb_stor_report_bus_reset(us);
//----- fill_inquiry_response() ---------------------
void fill_inquiry_response(struct us_data *us, unsigned char *data, unsigned int data_len)
{
- printk("usb --- fill_inquiry_response\n");
+ pr_info("usb --- fill_inquiry_response\n");
if (data_len<36) // You lose.
return;
struct us_data *us = (struct us_data *)__us;
struct Scsi_Host *host = us_to_host(us);
- printk("usb --- usb_stor_control_thread\n");
+ pr_info("usb --- usb_stor_control_thread\n");
for(;;)
{
if (wait_for_completion_interruptible(&us->cmnd_ready))
else
{
SkipForAbort:
- printk("scsi command aborted\n");
+ pr_info("scsi command aborted\n");
}
if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags))
//----- associate_dev() ---------------------
static int associate_dev(struct us_data *us, struct usb_interface *intf)
{
- printk("usb --- associate_dev\n");
+ pr_info("usb --- associate_dev\n");
/* Fill in the device-related fields */
us->pusb_dev = interface_to_usbdev(intf);
us->cr = usb_alloc_coherent(us->pusb_dev, sizeof(*us->cr), GFP_KERNEL, &us->cr_dma);
if (!us->cr)
{
- printk("usb_ctrlrequest allocation failed\n");
+ pr_info("usb_ctrlrequest allocation failed\n");
return -ENOMEM;
}
us->iobuf = usb_alloc_coherent(us->pusb_dev, US_IOBUF_SIZE, GFP_KERNEL, &us->iobuf_dma);
if (!us->iobuf)
{
- printk("I/O buffer allocation failed\n");
+ pr_info("I/O buffer allocation failed\n");
return -ENOMEM;
}
us->sensebuf = kmalloc(US_SENSE_SIZE, GFP_KERNEL);
if (!us->sensebuf)
{
- printk("Sense buffer allocation failed\n");
+ pr_info("Sense buffer allocation failed\n");
return -ENOMEM;
}
return 0;
struct usb_device *dev = us->pusb_dev;
struct usb_interface_descriptor *idesc = &us->pusb_intf->cur_altsetting->desc;
- printk("usb --- get_device_info\n");
+ pr_info("usb --- get_device_info\n");
us->subclass = idesc->bInterfaceSubClass;
us->protocol = idesc->bInterfaceProtocol;
if (us->fflags & US_FL_IGNORE_DEVICE)
{
- printk("device ignored\n");
+ pr_info("device ignored\n");
return -ENODEV;
}
//----- get_transport() ---------------------
static int get_transport(struct us_data *us)
{
- printk("usb --- get_transport\n");
+ pr_info("usb --- get_transport\n");
switch (us->protocol) {
case USB_PR_BULK:
us->transport_name = "Bulk";
default:
return -EIO;
}
- //printk("Transport: %s\n", us->transport_name);
+ /* pr_info("Transport: %s\n", us->transport_name); */
/* fix for single-lun devices */
if (us->fflags & US_FL_SINGLE_LUN)
//----- get_protocol() ---------------------
static int get_protocol(struct us_data *us)
{
- printk("usb --- get_protocol\n");
- printk("us->pusb_dev->descriptor.idVendor = %x\n", us->pusb_dev->descriptor.idVendor);
- printk("us->pusb_dev->descriptor.idProduct = %x\n", us->pusb_dev->descriptor.idProduct);
+ pr_info("usb --- get_protocol\n");
+ pr_info("us->pusb_dev->descriptor.idVendor = %x\n",
+ us->pusb_dev->descriptor.idVendor);
+ pr_info("us->pusb_dev->descriptor.idProduct = %x\n",
+ us->pusb_dev->descriptor.idProduct);
switch (us->subclass) {
case USB_SC_SCSI:
us->protocol_name = "Transparent SCSI";
default:
return -EIO;
}
- //printk("Protocol: %s\n", us->protocol_name);
+ /* pr_info("Protocol: %s\n", us->protocol_name); */
return 0;
}
struct usb_endpoint_descriptor *ep_out = NULL;
struct usb_endpoint_descriptor *ep_int = NULL;
- printk("usb --- get_pipes\n");
+ pr_info("usb --- get_pipes\n");
for (i = 0; i < altsetting->desc.bNumEndpoints; i++)
{
if (!ep_in || !ep_out || (us->protocol == USB_PR_CBI && !ep_int))
{
- printk("Endpoint sanity check failed! Rejecting dev.\n");
+ pr_info("Endpoint sanity check failed! Rejecting dev.\n");
return -EIO;
}
{
struct task_struct *th;
- printk("usb --- usb_stor_acquire_resources\n");
+ pr_info("usb --- usb_stor_acquire_resources\n");
us->current_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!us->current_urb)
{
- printk("URB allocation failed\n");
+ pr_info("URB allocation failed\n");
return -ENOMEM;
}
th = kthread_run(usb_stor_control_thread, us, "eucr-storage");
if (IS_ERR(th))
{
- printk("Unable to start control thread\n");
+ pr_info("Unable to start control thread\n");
return PTR_ERR(th);
}
us->ctl_thread = th;
//----- usb_stor_release_resources() ---------------------
static void usb_stor_release_resources(struct us_data *us)
{
- printk("usb --- usb_stor_release_resources\n");
+ pr_info("usb --- usb_stor_release_resources\n");
SM_FreeMem();
/* Call the destructor routine, if it exists */
if (us->extra_destructor)
{
- printk("-- calling extra_destructor()\n");
+ pr_info("-- calling extra_destructor()\n");
us->extra_destructor(us->extra);
}
//----- dissociate_dev() ---------------------
static void dissociate_dev(struct us_data *us)
{
- printk("usb --- dissociate_dev\n");
+ pr_info("usb --- dissociate_dev\n");
kfree(us->sensebuf);
{
struct Scsi_Host *host = us_to_host(us);
- printk("usb --- quiesce_and_remove_host\n");
+ pr_info("usb --- quiesce_and_remove_host\n");
/* If the device is really gone, cut short reset delays */
if (us->pusb_dev->state == USB_STATE_NOTATTACHED)
//----- release_everything() ---------------------
static void release_everything(struct us_data *us)
{
- printk("usb --- release_everything\n");
+ pr_info("usb --- release_everything\n");
usb_stor_release_resources(us);
dissociate_dev(us);
{
struct us_data *us = (struct us_data *)__us;
- printk("usb --- usb_stor_scan_thread\n");
- printk("EUCR : device found at %d\n", us->pusb_dev->devnum);
+ pr_info("usb --- usb_stor_scan_thread\n");
+ pr_info("EUCR : device found at %d\n", us->pusb_dev->devnum);
set_freezable();
/* Wait for the timeout to expire or for a disconnect */
mutex_unlock(&us->dev_mutex);
}
scsi_scan_host(us_to_host(us));
- printk("EUCR : device scan complete\n");
+ pr_info("EUCR : device scan complete\n");
}
complete_and_exit(&us->scanning_done, 0);
}
BYTE MiscReg03 = 0;
struct task_struct *th;
- printk("usb --- eucr_probe\n");
+ pr_info("usb --- eucr_probe\n");
host = scsi_host_alloc(&usb_stor_host_template, sizeof(*us));
if (!host)
{
- printk("Unable to allocate the scsi host\n");
+ pr_info("Unable to allocate the scsi host\n");
return -ENOMEM;
}
result = scsi_add_host(host, &intf->dev);
if (result)
{
- printk("Unable to add the scsi host\n");
+ pr_info("Unable to add the scsi host\n");
goto BadDevice;
}
th = kthread_create(usb_stor_scan_thread, us, "eucr-stor-scan");
if (IS_ERR(th))
{
- printk("Unable to start the device-scanning thread\n");
+ pr_info("Unable to start the device-scanning thread\n");
complete(&us->scanning_done);
quiesce_and_remove_host(us);
result = PTR_ERR(th);
if (!(MiscReg03 & 0x02)) {
result = -ENODEV;
quiesce_and_remove_host(us);
- printk(KERN_NOTICE "keucr: The driver only supports SM/MS card.\
+ pr_info("keucr: The driver only supports SM/MS card.\
To use SD card, \
please build driver/usb/storage/ums-eneub6250.ko\n");
goto BadDevice;
/* We come here if there are any problems */
BadDevice:
- printk("usb --- eucr_probe failed\n");
+ pr_info("usb --- eucr_probe failed\n");
release_everything(us);
return result;
}
{
struct us_data *us = usb_get_intfdata(intf);
- printk("usb --- eucr_disconnect\n");
+ pr_info("usb --- eucr_disconnect\n");
quiesce_and_remove_host(us);
release_everything(us);
}
static int __init usb_stor_init(void)
{
int retval;
- printk("usb --- usb_stor_init start\n");
+ pr_info("usb --- usb_stor_init start\n");
retval = usb_register(&usb_storage_driver);
if (retval == 0)
- printk("ENE USB Mass Storage support registered.\n");
+ pr_info("ENE USB Mass Storage support registered.\n");
return retval;
}
//----- usb_stor_exit() ---------------------
static void __exit usb_stor_exit(void)
{
- printk("usb --- usb_stor_exit\n");
+ pr_info("usb --- usb_stor_exit\n");
usb_deregister(&usb_storage_driver) ;
}
projects / openwrt / staging / blogic.git / commitdiff