uboot-oxnas: adjust digtial drive strength of IC+ phy

This is what the vendor bootloader does on KD20.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43509

diff --git a/package/boot/uboot-oxnas/patches/200-icplus-phy.patch b/package/boot/uboot-oxnas/patches/200-icplus-phy.patch
index 3db7816ca810fc4aa81aea60ecc1589c022f0884..b37833127709d531bee3838ca82a06db3d126583 100644 (file)
--- a/package/boot/uboot-oxnas/patches/200-icplus-phy.patch
+++ b/package/boot/uboot-oxnas/patches/200-icplus-phy.patch
@@ -24,7 +24,7 @@ Add it back, so we can use it.
  obj-$(CONFIG_PHY_MICREL) += micrel.o
 --- /dev/null
 +++ b/drivers/net/phy/icplus.c
-@@ -0,0 +1,80 @@
+@@ -0,0 +1,93 @@
 +/*
 + * ICPlus PHY drivers
 + *
@@ -43,6 +43,15 @@ Add it back, so we can use it.
 +#define IP101A_G_IRQ_CONF_STATUS        0x11    /* Conf Info IRQ & Status Reg */
 +#define IP101A_G_IRQ_PIN_USED           (1<<15) /* INTR pin used */
 +#define IP101A_G_IRQ_DEFAULT            IP101A_G_IRQ_PIN_USED
++#define IP1001LF_DRIVE_MASK     (15 << 5)
++#define IP1001LF_RXCLKDRIVE_HI  (2  << 5)
++#define IP1001LF_RXDDRIVE_HI    (2  << 7)
++#define IP1001LF_RXCLKDRIVE_M   (1  << 5)
++#define IP1001LF_RXDDRIVE_M     (1  << 7)
++#define IP1001LF_RXCLKDRIVE_L   (0  << 5)
++#define IP1001LF_RXDDRIVE_L     (0  << 7)
++#define IP1001LF_RXCLKDRIVE_VL  (3  << 5)
++#define IP1001LF_RXDDRIVE_VL    (3  << 7)
 +
 +static int ip1001_config(struct phy_device *phydev)
 +{
@@ -73,6 +82,10 @@ Add it back, so we can use it.
 +                      return c;
 +
 +              c |= IP1001_PHASE_SEL_MASK;
++              /* adjust digtial drive strength */
++              c &= ~IP1001LF_DRIVE_MASK;
++              c |=  IP1001LF_RXCLKDRIVE_M;
++              c |=  IP1001LF_RXDDRIVE_M;
 +              c = phy_write(phydev, MDIO_DEVAD_NONE, IP10XX_SPEC_CTRL_STATUS,
 +                            c);
 +              if (c < 0)